2008.7.19.high frequency
TRANSCRIPT
-
7/27/2019 2008.7.19.High Frequency
1/1
Definition
Direct / Sparking:
Oxygen ionizesdue to the gap
between the electrodeand the skin
tissueswhich then creates Ozone.
(HF + Oxygen = Ozone)
IndirectA current is generated by high rate
of oscillations (cycles) per second
which then caused friction of
water molecules within the skin
tissue.
High Frequency
Or
Tesla Current
Electrical Information Alternating (Oscillation)
Current
Oscillation rate from 20,000-250,000 Hz
Frequency= Measure ofHertz (Hz) per second
Hz= Unit to measure thefrequency of the number ofwavelength pass through per
second.
ElectrodesMushroom,Neck, Rake, Fulgurator &
Saturator.
General Effect
Thermal effect. No Mechanical effectGases
Neon = Orange Argon = Violet /Purple
Specific Effects & BenefitsDirect
Anti-bacterial and germicidaldue to Ozone production,
Increased cellular metabolism,
Dries and regulates sebum
flow & Desquamation -
encourage skin shedding onscar tissue.
Indirect
Relaxes client, Soothes nerveendings, Creates warmth,
Increase circulationincrease
metabolism, Improves skin
texture due to desquamation,
Encourage product absorption
& Increases elimination of
waste products due to increase
of skin temperature.
Contraindication Metal plates & pins Pacemakers Heart Conditions Cancers (Abnormal tissues) Diabetes Epilepsy Asthma (ozone can precipitate
attack)
Thrombosis Pregnancy Open cuts or abrasion &
sunburn
Extreme vascular conditionsdue to increase warmth &
stimulation
JewelleryUsed for how long?
Sparking
8 taps on local areas & notlifted higher than 7mm.
Direct
5-7 mins using small circularmovement.
Gauze should be placed overelectrode to create gap
Indirect
10-15mins using Viennesemassage with effleuragemovement & NO tapotement.
Safety
Sharp/soft or Hot/coldsensitive test Alljewellerytaken off NO WATERaround area Feet flaton floor No contact with other metal
(bed frame or trolley)
Do not lifted Sparkingelectrode higher than 7mm
Use gauzeto create gap forDirect H/F treatment
No tapotementmovement forIndirect H/F treatment
Remove INDEX FINGEROFF client face
Skin Type /Condition
Sparking
Pustular skin.
Direct
Oily, pustular skin.
IndirectMature & dry skin.
Application Methods
1. Ensure machine is swithed off or on zero before the electrode is in contact with clients skin,2. Then turn dial to the intensity which client is comfortable,3. Turned back to zero before removing electrode from client.
OR
1. Start the machine at a minimum level and place your (therapist) forefinger on the glasselectrode,
2. Then position the electrode on clients face before removing your forefinger from the electrode& increase the level which client is comfortable,
3. On completion of treatment, lower the intensity to minimum, replace your finger on theelectrode & remove from clients skin and then switched off the machine.
C/m document/teresa/beaut trainin material/advanced facial treatments/hi h fre uenc /19/7/2008