2007 civic hybrid online reference owner's manual ... -...

2007 Civic Hybrid Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com.

Contents

Owner's Identification Form

Introduction .........................................................................................................................................i A Few Words About Safety ................................................................................................................iii

Your Vehicle at a Glance .....................................................................................................................3 Driver and Passenger Safety ..............................................................................................................5 Proper use and care of your vehicle's seat belts, and Supplemental Restraint System. Instruments and Controls ................................................................................................................. 55 Instrument panel indicator and gauge, and how to use dashboard and steering column controls. Comfort and Convenience Features .............................................................................................. 99 How to operate the climate control system, the audio system, and other convenience features. Before Driving.................................................................................................................................. 149What gasoline to use, how to break-in your new vehicle, and how to load luggage and other cargo. Driving .............................................................................................................................................. 163 The proper way to start the engine, shift the transmission, and park, plus towing a trailer. Maintenance ..................................................................................................................................... 177 The Maintenance Schedule shows you when you need to take your vehicle to the dealer. Taking Care of the Unexpected ...................................................................................................... 215 This section covers several problems motorists sometimes experience, and how to handle them. Technical Information..................................................................................................................... 239ID numbers, dimensions, capacities, and technical information. Warranty and Customer Relations (U.S. and Canada) ................................................................ 251A summary of the warranties covering your new Acura, and how to contact us. Authorized Manuals (U.S. only)...................................................................................................... 255 How to order manuals and other technical literature. Index...................................................................................................................................................... I

Service Information Summary A summary of information you need when you pull up to the fuel pump.

Accord Value Package Audio System

This owner’s manual should beconsidered a permanent part of thevehicle and should remain with thevehicle when it is sold.

This owner’s manual covers allmodels of the Civic Hybrid. You mayfind descriptions of equipment andfeatures that are not on yourparticular model.

The information and specificationsincluded in this publication were ineffect at the time of approval forprinting. Honda Motor Co., Ltd.reserves the right, however, todiscontinue or change specificationsor design at any time without noticeand without incurring any obligationwhatsoever.

Owner’s Identif ication

OWNER

ADDRESS

V. I. N.

DELIVERY DATE

DEALER NAME DEALER NO.

ADDRESS

OWNER’S SIGNATURE

DEALER’S SIGNATURE

STREET

CITY STATE/PROVINCE ZIP CODE/POSTAL CODE

(Date sold to original retail purchaser)

STREET

CITY STATE/PROVINCE ZIP CODE/POSTAL CODE

One of the best ways to enhance the enjoyment of your new vehicle is toread this manual. In it, you will learn how to operate its driving controls andconvenience items. Afterwards, keep this owner’s manual in your vehicle soyou can refer to it at any time.

Several warranties protect your new vehicle. Read the warranty bookletthoroughly so you understand the coverages and are aware of your rightsand responsibilities.

Maintaining your vehicle according to the schedules given in this manualhelps to keep your driving trouble-free while it preserves your investment.When your vehicle needs maintenance, keep in mind that your dealer’s staffis specially trained in servicing the many systems unique to your vehicle.Your dealer is dedicated to your satisfaction and will be pleased to answerany questions and concerns.

As you read this manual, you willfind information that is preceded bya symbol. Thisinformation is intended to help youavoid damage to your vehicle, otherproperty, or the environment.

Congratulations! Your selection of a 2007 Honda Civic Hybrid was a wiseinvestment. It will give you years of driving pleasure.

Introduction

i

California Proposition 65 Warning

This product contains or emits chemicals known to the state of California to cause cancer and birthdefects or other reproductive harm.

Event Data RecordersThis vehicle is equipped with one or more devices commonly referred to as event data recorders. These devicesrecord front seat belt use, front passenger seat occupancy, airbag deployment data, and the failure of any airbagsystem component. This data belongs to the vehicle owner and may not be accessed by anyone else except as legallyrequired or with the permission of the vehicle owner.

Service Diagnostic RecordersThis vehicle is equipped with service-related devices that record information about powertrain performance. The datacan be used to verify emissions law requirements and/or help technicians diagnose and solve service problems. It mayalso be combined with data from other sources for research purposes, but it remains confidential and is never linked tothe vehicle owner.

Introduction

WARNING:

ii

－

－

－

－

－

－

To help you make informeddecisions about safety, we haveprovided operating procedures andother information on labels and inthis manual. This information alertsyou to potential hazards that couldhurt you or others.

You will find this important safety information in a variety of forms,including:

preceded by a safety alert symbol and one ofthree signal words: , , or .These signal words mean:

such as Important Safety Reminders or ImportantSafety Precautions.

such as Driver and Passenger Safety.

This entire book is filled with important safety information please read itcarefully.

Your safety, and the safety of others,is very important. And operating thisvehicle safely is an importantresponsibility.

Of course, it is not practical orpossible to warn you about all thehazards associated with operating ormaintaining your vehicle. You mustuse your own good judgement.

on the vehicle.

how to use this vehicle correctly and safely.

Safety Messages

Safety Headings

Safety Section

Safety Labels

Instructions

A Few Words About Safety

DANGER WARNING CAUTION

iii

You WILL be KILLED or SERIOUSLYHURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLYHURT if you don’t follow instructions.

You CAN be HURT if you don’t followinstructions.

Your Vehicle at a Glance

Your

Vehicle

ataG

lance

3

GAUGESINSTRUMENT PANEL INDICATORS AUDIO SYSTEM

AUXILIARY INPUT JACK

ACCESSORYPOWER SOCKET

(P. 64)(P. 58)

(P. 9, 24)PASSENGER’S FRONT AIRBAG(P. 106)

DRIVER’S FRONTAIRBAG(P. 9, 24)

MIRROR CONTROLS

POWER DOOR LOCKMASTER SWITCH(P. 80)

POWER WINDOWSWITCHES

FUEL FILL DOORRELEASE HANDLE

TRUNK RELEASEHANDLE(P. 86)

(P. 151)

(P. 143)

DOOR LOCK TAB

AUTOMATIC TRANSMISSION (CVT)(P. 166)

Vehicle with navigation system is shown

(P. 92) (P. 96)

(P. 93)

(P. 80)

(P. 100)

CLIMATE CONTROLSYSTEM

＊＊＊

＊

＊

＊

Only on vehicles equipped with navigation system. Refer to the navigation system manual.

To use the horn, press the pad around the ‘‘H’’ logo.:1 :2 :

Canadian model only

Your Vehicle at a Glance

4

(P. 145)

WINDSHIELD WIPERS/WASHERS

HORN

CRUISE CONTROL BUTTONS


(P. 74)(P. 73)

INSTRUMENT PANELBRIGHTNESS BUTTONS (P. 72)

DISPLAY CHANGEBUTTON(P. 65)

SEL/RESETBUTTON(P. 64)

REMOTE AUDIOCONTROLS(P. 143)

VOICE CONTROLSWITCHES

HOOD RELEASEHANDLE(P. 152)

STEERING WHEELADJUSTMENT(P. 75)

PASSENGER AIRBAG OFFINDICATOR(P. 31)

(P. 74)HAZARD WARNING BUTTON

REAR WINDOW DEFOGGER(P. 75)HEATED MIRRORS(P. 94)

HEADLIGHTS/TURN SIGNAL

2

1

－

This section gives you importantinformation about how to protectyourself and your passengers. Itshows you how to use seat belts. Itexplains how your airbags work. Andit tells you how to properly restraininfants and children in your vehicle.

.........Important Safety Precautions . 6.......Your Vehicle’s Safety Features . 7

.......................................Seat Belts . 8...........................................Airbags . 9

.........Protecting Adults and Teens . 11.....1. Close and Lock the Doors . 11

...........2. Adjust the Front Seats . 11............3. Adjust the Seat-Backs . 12

...4. Adjust the Head Restraints . 135. Fasten and Position the

.............................Seat Belts . 146. Maintain a Proper Sitting

................................Position . 15.....Advice for Pregnant Women . 16...Additional Safety Precautions . 17

Additional Information About.......................Your Seat Belts . 18

..Seat Belt System Components . 18......................Lap/Shoulder Belt . 19

Automatic Seat Belt...............................Tensioners . 19

...............Seat Belt Maintenance . 20Additional Information About

...........................Your Airbags . 21......Airbag System Components . 21

How Your Front Airbags.........................................Work . 24

...How Your Side Airbags Work . 28How Your Side Curtain Airbags

.........................................Work . 29..How the SRS Indicator Works . 30

How the Side Airbag Off......................Indicator Works . 30

How the Passenger Airbag Off......................Indicator Works . 31

.............................Airbag Service . 32...Additional Safety Precautions . 32

Protecting Children General................................Guidelines . 34

All Children Must Be...............................Restrained . 34

All Children Should Sit in a.................................Back Seat . 35

The Passenger’s Front Airbag..........can Pose Serious Risks . 35

If You Must Drive with Several...................................Children . 37

If a Child Requires Close..................................Attention . 37

...Additional Safety Precautions . 38Protecting Infants and Small

.......................................Children . 39.......................Protecting Infants . 39

.........Protecting Small Children . 40.....................Selecting a Child Seat . 41....................Installing a Child Seat . 42

...............................With LATCH . 43..........With a Lap/shoulder Belt . 45

..............................With a Tether . 47...........Protecting Larger Children . 48

...............Checking Seat Belt Fit . 48..................Using a Booster Seat . 49

When Can a Larger Child Sit in.........................................Front . 50

...Additional Safety Precautions . 51.............Carbon Monoxide Hazard . 52

...................................Safety Labels . 53

Driver and Passenger Safety

Driver

andP

assengerSafety

5

－

You’ll find many safetyrecommendations throughout thissection, and throughout this manual.The recommendations on this pageare the ones we consider to be themost important.

A seat belt is your best protection inall types of collisions. Airbags aredesigned to supplement seat belts,not replace them. So even thoughyour vehicle is equipped with airbags,make sure you and your passengersalways wear your seat belts, andwear them properly (see page ).

Alcohol and driving don’t mix. Evenone drink can reduce your ability torespond to changing conditions, andyour reaction time gets worse with

every additional drink. So don’t drinkand drive, and don’t let your friendsdrink and drive, either.

Excessive speed is a major factor incrash injuries and deaths. Generally,the higher the speed, the greater therisk, but serious injuries can alsooccur at lower speeds. Never drivefaster than is safe for currentconditions, regardless of themaximum speed posted.While airbags can save lives, they

can cause serious or fatal injuries tooccupants who sit too close to them,or are not properly restrained.Infants, young children, and shortadults are at the greatest risk. Besure to follow all instructions andwarnings in this manual.

Children age 12 and under shouldride properly restrained in a backseat, not the front seat. Infants andsmall children should be restrainedin a child seat. Larger childrenshould use a booster seat and a lap/shoulder belt until they can use thebelt properly without a booster seat(see pages ).

Having a tire blowout or amechanical failure can be extremelyhazardous. To reduce the possibilityof such problems, check your tirepressures and condition frequently,and perform all regularly scheduledmaintenance (see page ).

14

34 51

179

Important Safety Precautions

Always Wear Your Seat Belt

Control Your Speed

Keep Your Vehicle in SafeCondition

Don’t Drink and Drive

Be Aware of Airbag Hazards

Restrain All Children

6

Your vehicle is equipped with manyfeatures that work together toprotect you and your passengersduring a crash.

However, you and your passengerscan’t take full advantage of thesefeatures unless you remain sitting ina proper position and

. In fact, some safetyfeatures can contribute to injuries ifthey are not used properly.

The following pages explain how youcan take an active role in protectingyourself and your passengers.

Some features do not require anyaction on your part. These include astrong steel framework that forms asafety cage around the passengercompartment, front and rear crushzones, a collapsible steering column,and tensioners that tighten the frontseat belts in a crash.

Your Vehicle’s Safety Features

always wearyour seat belts

Driver

andP

assengerSafety

7

(9)

(2)

(6)

(4)(3) (1)(8)

(7)

(5)

(2)(11)

(9)

(10)(8)

(8) Side Airbags(9) Side Curtain Airbags(10) Front Seat Belt Tensioners(11) Door Locks

(1) Safety Cage(2) Crush Zone(3) Seats and Seat-Backs(4) Head Restraints(5) Collapsible Steering Column(6) Seat Belts(7) Front Airbags

Your vehicle is equipped with seatbelts in all seating positions.

Seat belts are the single mosteffective safety device for adults andlarger children. (Infants and smallerchildren must be properly restrainedin child seats.)

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, eventhough your vehicle has airbags.

In addition, most states and allCanadian provinces require you towear seat belts.

When properly worn, seat belts:

Keep you connected to the vehicleso you can take advantage of thevehicle’s built-in safety features.

Help keep you from being thrownagainst the inside of the vehicleand against other occupants.

Keep you from being thrown outof the vehicle.

Help keep you in a good positionshould the airbags ever deploy. Agood position reduces the risk ofinjury from an inflating airbag andallows you to get the bestadvantage from the airbag.

Of course, seat belts cannotcompletely protect you in everycrash. But in most cases, seat beltscan reduce your risk of seriousinjury.

Always wear your seat belt, andmake sure you wear it properly.

Your seat belt system also includesan indicator on the instrument paneland a beeper to remind you and yourpassengers to fasten your seat belts.

Help protect you in almost everytype of crash, including frontal,side and rear impacts, androllovers.


Seat Belts

Why Wear Seat Belts

What You Should Do:

8

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, eventhough your vehicle has airbags.

Be sure you and yourpassengers always wear seatbelts and wear them properly.

CONTINUED

Your vehicle has a supplementalrestraint system (SRS) with frontairbags to help protect the heads andchests of the driver and a front seatpassenger during a moderate tosevere frontal collision (see page

for more information on howyour front airbags work).

Your vehicle also has side airbags tohelp protect the upper torso of thedriver or a front seat passengerduring a moderate to severe sideimpact (see page for moreinformation on how your side airbagswork).

In addition, your vehicle has sidecurtain airbags to help protect theheads of the driver, front passenger,and passengers in the outer rearseating positions during a moderateto severe side impact (see page

for more information on howyour side curtain airbags work).

24

28

29


Airbags

Driver

andP

assengerSafety

9

The most important things you needto know about your airbags are:

They are designed to supplementthe seat belts.

To dotheir job, airbags must inflate withtremendous force. So whileairbags help save lives, they cancause minor injuries or moreserious or even fatal injuries ifoccupants are not properlyrestrained or sitting properly.

Always wearyour seat belt properly, and situpright and as far back from thesteering wheel as possible whileallowing full control of the vehicle. Afront passenger should move theirseat as far back from the dashboardas possible.

The rest of this section gives moredetailed information about how youcan maximize your safety.

Remember however, that no safetysystem can prevent all injures ordeaths that can occur in a severecrash, even when seat belts areproperly worn and the airbags deploy.


Airbags do not replace seat belts.

Airbags offer no protection in rearimpacts, or minor frontal or sidecollisions.

Airbags can pose hazards.

What you should do:

10

－See pages for importantguidelines on how to properlyprotect infants, small children, andlarger children who ride in yourvehicle.

After everyone has entered thevehicle, be sure the doors are closedand locked.

Your vehicle has a door-openindicator on the instrument panel toindicate when any door is not tightlyclosed.

The following pages provideinstructions on how to properlyprotect the driver, adult passengersand teenage children who are largeenough and mature enough to driveor ride in the front seat.

Locking the doors reduces thechance of someone being thrown outof the vehicle during a crash, and ithelps prevent passengers fromaccidentally opening a door andfalling out.

Locking the doors also helps preventan outsider from unexpectedlyopening a door when you come to astop.

See page for how to lock thedoors, page for how the door-openindicator works, and page for howthe automatic door locking andunlocking feature works.

Adjust the driver’s seat as far to therear as possible while allowing you tomaintain full control of the vehicle.Have a front passenger adjust theirseat as far to the rear as possible.

34 51

8060

81

CONTINUED

Adjust the Front SeatsIntroduction

Close and Lock the Doors1.

2.

Protecting Adults and Teens

Driver

andP

assengerSafety

11

Adjust the driver’s seat-back to acomfortable, upright position,leaving ample space between yourchest and the airbag cover in thecenter of the steering wheel.

Passengers with adjustable seat-backs should also adjust their seat-back to a comfortable, uprightposition.

If you sit too close to the steeringwheel or dashboard, you can beseriously injured by an inflating frontairbag, or by striking the steeringwheel or dashboard.

The National Highway Traffic SafetyAdministration and TransportCanada recommend that driversallow at least 10 inches (25 cm)between the center of the steeringwheel and the chest. In addition toadjusting the seat, you can adjust thesteering wheel up and down, and inand out (see page ).

If you cannot get far enough awayfrom the steering wheel and stillreach the controls, we recommendthat you investigate whether sometype of adaptive equipment may help.

See page for how to adjust thefront seats.

Once a seat is adjusted correctly,rock it back and forth to make sure itis locked in position.

7589


Adjust the Seat-Backs3.

12

Sitting too close to a frontairbag can result in seriousinjury or death if the frontairbags inflate.

Always sit as far back from thefront airbags as possible.

Adjust the driver’s head restraint sothe back of your head rests againstthe center of the restraint.

Reclining a seat-back so that theshoulder part of the belt no longerrests against the occupant’s chestreduces the protective capability ofthe belt. It also increases the chanceof sliding under the belt in a crashand being seriously injured. Thefarther a seat-back is reclined, thegreater the risk of injury.

Have passengers adjust their headrestraints properly as well. Tallerpersons should adjust their restraintas high as possible.

When a passenger is seated in therear center seating position, makesure the center head restraint isadjusted to its highest position.

Properly adjusted head restraintswill help protect occupants fromwhiplash and other crash injuries.

See page for how to adjust thehead restraints.

See page for how to adjust theseat-backs.

9190

Adjust the Head Restraints4.


Driver

andP

assengerSafety

13

Reclining the seat-back too farcan result in serious injury ordeath in a crash.

Adjust the seat-back to anupright position, and sit wellback in the seat.

Improperly positioning headrestraints reduces theireffectiveness, and you can beseriously injured in a crash.

Make sure head restraints arein place and positioned properlybefore driving.

Position the lap part of the belt aslow as possible across your hips,then pull up on the shoulder part ofthe belt so the lap part fits snugly.This lets your strong pelvic bonestake the force of a crash and reducesthe chance of internal injuries.

Insert the latch plate into the buckle,then tug on the belt to make sure thebelt is securely latched. Check thatthe belt is not twisted, because atwisted belt can cause seriousinjuries in a crash.

If the seat belt touches or crossesyour neck, or if it crosses your arminstead of your shoulder, you need toadjust the seat belt anchor height.

If necessary, pull up on the belt againto remove any slack, then check thatthe belt rests across the center ofyour chest and over your shoulder.This spreads the forces of a crashover the strongest bones in yourupper body.


Fasten and Position the SeatBelts

5.

14

Improperly positioning the seatbelts can cause serious injuryor death in a crash.

Make sure all seat belts areproperly positioned beforedriving.

After all occupants have adjustedtheir seats and put on seat belts, it isvery important that they continue tosit upright, well back in their seats,with their feet on the floor, until thevehicle is parked and the engine isoff.

Sitting improperly can increase thechance of injury during a crash. Forexample, if an occupant slouches,lies down, turns sideways, sitsforward, leans forward or sideways,or puts one or both feet up, thechance of injury during a crash isgreatly increased.

This could causevery serious injuries in a crash.

If a seat belt does not seem to workproperly, it may not protect theoccupant in a crash.

Using a seatbelt that is not working properly canresult in serious injury or death.Have your dealer check the belt assoon as possible.

See page for additionalinformation about your seat beltsand how to take care of them.

The front seats have adjustable seatbelt anchors. To adjust the height ofan anchor, press and hold the releasebutton and slide the anchor up ordown as needed (it has fourpositions).

18

CONTINUED

Maintain a Proper SittingPosition

6.Never place the shoulder portion of alap/shoulder belt under your arm orbehind your back.

No one should sit in a seat with aninoperative seat belt.


Driver

andP

assengerSafety

15

RELEASE BUTTON

If you are pregnant, the best way toprotect yourself and your unbornchild when driving or riding in avehicle is to always wear a seat belt,and keep the lap part of the belt aslow as possible across the hips.

When driving, remember to situpright and adjust the seat as farback as possible while allowing fullcontrol of the vehicle. When ridingas a front passenger, adjust the seatas far back as possible.

This will reduce the risk of injuriesto both you and your unborn childthat can be caused by a crash or aninflating front airbag.

Each time you have a checkup, askyour doctor if it’s okay for you todrive.

In addition, an occupant who is out ofposition in the front seat can beseriously or fatally injured in a crashby striking interior parts of thevehicle or being struck by aninflating front airbag.

Advice for Pregnant Women


16

Sitting improperly or out ofposition can result in seriousinjury or death in a crash.

Always sit upright, well back inthe seat, with your feet on thefloor.

Carrying hard or sharpobjects on your lap, or driving witha pipe or other sharp object inyour mouth, can result in injuriesif your front airbag inflates.

If they do, theycould be very seriously injured in acrash.

Devices intended to improveoccupant comfort or reposition theshoulder part of a seat belt canreduce the protective capability ofthe seat belt and increase thechance of serious injury in a crash.

If yourhands or arms are close to anairbag cover, they could be injuredif the airbag inflates.

Objects onthe covers marked ‘‘SRS AIRBAG’’could interfere with the properoperation of the airbags or bepropelled inside the vehicle andhurt someone if the airbags inflate.

If a side airbag or aside curtain airbag inflates, a cupholder or other hard objectattached on or near the door couldbe propelled inside the vehicle andhurt someone.

Do not place hard or sharp objectsbetween yourself and a frontairbag.

Two people should never use thesame seat belt.

Do not put any accessories on seatbelts.

Keep your hands and arms awayfrom the airbag covers.

Do not attach or place objects onthe front airbag covers.

Do not attach hard objects on ornear a door.

Additional Safety Precautions


Driver

andP

assengerSafety

17

If a front passenger does not fastentheir seat belt, the indicator willcome on about 6 seconds after theignition switch is turned to the ON(II) position.

If either the driver or a frontpassenger does not fasten their seatbelt while driving, the beeper willsound and the indicator will flashagain at regular intervals.

Your seat belt system includes lap/shoulder belts in all seating positions.The front seat belts are alsoequipped with automatic seat belttensioners.

This system monitors the front seatbelts. If you turn the ignition switchto the ON (II) position before yourseat belt is fastened, the beeper willsound and the indicator will flash. Ifyour seat belt is not fastened beforethe beeper stops, the indicator willstop flashing but remain on.

The seat belt systemincludes an indicator on the

instrument panel and a beeper toremind you and your passengers tofasten your seat belts.

When no one is sitting in the frontpassenger’s seat, or a child or smalladult is riding there, the indicatorshould not come on and the beepershould not sound.

If the indicator comes on or thebeeper sounds when the driver’s seatbelt is latched and there is no frontseat passenger and no items on thefront seat, something may beinterfering with the monitoringsystem. Look for and remove:

Any items under the frontpassenger’s seat.

Any objects hanging on the seat orin the seat-back pocket.

This system uses the same sensorsas the front airbags to monitorwhether the front seat belts arelatched or unlatched, and how muchweight is on the front passenger’sseat (see pages and ).

Any object on the floor that istouching the rear of the seat-back.

If no obstructions are found, haveyour vehicle checked by a dealer.

26 27

Additional Information About Your Seat Belts

Seat Belt System Components

Seat Belt Indicator

18

CONTINUED

For added protection, the front seatbelts are equipped with automaticseat belt tensioners. When activated,the tensioners immediately tightenthe belts to help hold the driver anda front passenger in position.

The tensioners are designed toactivate in any collision severeenough to cause a front, side, or sidecurtain airbag to inflate.

The lap/shoulder belt goes overyour shoulder, across your chest,and across your hips.

To fasten the belt, insert the latchplate into the buckle, then tug on thebelt to make sure the buckle islatched (see page for how toproperly position the belt).

To unlock the belt, press the redPRESS button on the buckle. Guidethe belt across your body so that itretracts completely. After exiting thevehicle, be sure the belt is out of theway and will not get closed in thedoor.

All seat belts have an emergencylocking retractor. In normal driving,the retractor lets you move freely inyour seat while it keeps sometension on the belt. During a collisionor sudden stop, the retractorautomatically locks the belt to help

restrain your body.

If the shoulder part of the belt ispulled all the way out, the lockableretractor will activate. The belt willretract, but it will not allow thepassenger to move freely.

To deactivate the lockable retractor,unlatch the buckle and let the seatbelt fully retract. To refasten theseat belt, pull it out only as far asneeded.

The seat belts in all positions exceptthe driver’s have an additionallockable retractor that must beactivated to secure a child seat (seepage ).

14

45


Automatic Seat Belt TensionersLap/Shoulder Belt

Driver

andP

assengerSafety

19

The dealer should also inspect theanchors for damage and replacethem if needed. If the automatic seatbelt tensioners activate during acrash, they must be replaced.

For safety, you should check thecondition of your seat belts regularly.

Pull each belt out fully, and look forfrays, cuts, burns, and wear. Checkthat the latches work smoothly andthe belts retract easily. If a belt doesnot retract easily, cleaning the beltmay correct the problem (see page

). Any belt that is not in goodcondition or working properly willnot provide good protection andshould be replaced as soon aspossible.

The tensioners can also be activatedduring a collision in which the frontairbags . In this case, theairbags would not be needed, but theadditional restraint could be helpful.

When the tensioners are activated,the seat belts will remain tight untilthey are unbuckled.

If a side airbag or side curtain airbagdeploys during a side impact, thetensioner on that side of the vehiclewill also deploy.

If a seat belt is worn during a crash,it must be replaced by your dealer. Abelt that has been worn during acrash may not provide the same levelof protection in a subsequent crash.

Honda provides a limited warrantyon seat belts. See your

booklet fordetails.

203

do not deploy

HondaWarranty Information


Seat Belt Maintenance

20

Not checking or maintainingseat belts can result in seriousinjury or death if the seat beltsdo not work properly whenneeded.

Check your seat belts regularly,and have any problemcorrected as soon as possible.

CONTINUED

Airbag System Components

Additional Information About Your Airbags

Driver

andP

assengerSafety

21

(9)(8) (1) (2)

(3) (11)

(5)

(4)

(13)(7) (10)

(14)(5)

(4)

(6)

(10)

(12)

(12) Front Passenger’s Weight Sensors/OPDS Sensors Control Unit(13) Seat Belt Buckle Tensioners(14) Rear Safing Sensor

(8) Front Impact Sensors(9) Passenger Airbag Off Indicator(10) Side Impact Sensors (First)(11) Side Airbag Cutoff Sensors

(1) Driver’s Airbag(2) Front Passenger’s Airbag(3) Control Unit(4) Front Seat Belt Tensioners(5) Side Airbags(6) Driver’s Seat Position Sensor(7) Front Passenger’s Weight Sensors

Two SRS (supplemental restraintsystem) front airbags. The driver’sairbag is stored in the center ofthe steering wheel; the frontpassenger’s airbag is stored in thedashboard. Both are marked ‘‘SRSAIRBAG’’ (see page ).

Two side airbags, one for thedriver and one for a frontpassenger. The airbags are storedin the outer edges of the seat-backs. Both are marked ‘‘SIDEAIRBAG’’ (see page ).

Two side curtain airbags, one foreach side of the vehicle. Theairbags are stored in the ceiling,above the side windows. The frontand rear pillars are marked ‘‘SIDECURTAIN AIRBAG’’ (see page

).

Your Airbag System includes:

24

28

29


22

(16)

(15)

(15)

(15) Side Impact Sensor (Second)(16) Side Curtain Airbags

Sensors that can detect amoderate to severe front impact orside impact.

An indicator on the instrumentpanel that alerts you that thepassenger’s side airbag has beenturned off (see page ).

An indicator on the dashboard thatalerts you that the passenger’sfront airbag has been turned off(see page ).

Emergency backup power in caseyour vehicle’s electrical system isdisconnected in a crash.

Automatic front seat belttensioners (see page ).

Sensors that can detect whethera small person or child is in thepassenger’s side airbag path andsignal the control unit to turnthe airbag off (see page ).

A driver’s seat position sensor thatmonitors the distance of the seatfrom the front airbag. If the seat istoo far forward, the airbag willinflate with less force (see page

).

Sensors that can detect whetherthe driver’s seat belt and a frontpassenger’s seat belt is latchedor unlatched (see page ).

Sensors that monitor the weighton the front passenger’s seat. Ifthe weight is about 65 lbs (29kg) or less (the weight of aninfant or small child), thepassenger’s front airbag will beturned off (see page ).

An indicator on the instrumentpanel that alerts you to a possibleproblem with your airbags,sensors, or seat belt tensioners(see page ).

A sophisticated electronic systemthat continually monitors andrecords information about thesensors, the control unit, theairbag activators, the seat belttensioners, and driver and frontpassenger seat belt use when theignition switch is in the ON (II)position.

19

31

18

2630

30

31

26


Driver

andP

assengerSafety

23

The total time for inflation anddeflation is one-tenth of a second, sofast that most occupants are notaware that the airbags deployed untilthey see them lying in their laps.

After inflating, the front airbagsimmediately deflate, so they won’tinterfere with the driver’s visibility,or the ability to steer or operateother controls.

During a frontal crash, your seat beltrestrains your lower body and torso,and the front airbag helps protectyour head and chest.

Although both airbags normallyinflate within a split second of eachother, it is possible for only oneairbag to deploy.

This can happen if the severity of acollision is at the margin, orthreshold, that determines whetheror not the airbags will deploy. Insuch cases, the seat belt will providesufficient protection, and thesupplemental protection offered bythe airbag would be minimal.

If you ever have a moderate tosevere frontal collision, sensors willdetect the vehicle’s rapiddeceleration.

If the rate of deceleration is highenough, the control unit will instantlyinflate the driver’s and frontpassenger’s airbags, at the time andwith the force needed.

Only the driver’s airbag will deploy ifthere is no passenger in the frontseat, or if the advanced airbagsystem has turned the passenger’sairbag off (see page ).31

How Your Front Airbags Work


24

Your front airbags are also dual-threshold airbags. Airbags with thisfeature have two deploymentthresholds that depend on whethersensors detect the occupant iswearing a seat belt or not.

If the occupant’s belt is ,the airbag will deploy at a slightlylower threshold, because theoccupant would need extraprotection.

If the occupant’s belt is , theairbag will inflate at a slightly higherthreshold, when the airbag would beneeded to supplement the protectionprovided by the seat belt.

Your front airbags are dual-stageairbags. This means they have twoinflation stages that can be ignitedsequentially or simultaneously,depending on crash severity.

In a crash, both stageswill ignite simultaneously to providethe quickest and greatest protection.

In a crash, one stage willignite first, then the second stagewill ignite a split second later. Thisprovides longer airbag inflation timewith a little less force.

After a crash, you may see whatlooks like smoke. This is actuallypowder from the airbag’s surface.Although the powder is not harmful,people with respiratory problemsmay experience some temporarydiscomfort. If this occurs, get out ofthe vehicle as soon as it is safe to doso.

CONTINUED


Dual-Threshold Airbags

not latched

latched

Dual-Stage Airbags

more severe

less severe

Driver

andP

assengerSafety

25

The driver’s advanced front airbagsystem includes a seat positionsensor under the seat. If the seat istoo far forward, the airbag willinflate with less force, regardless ofthe severity of the impact.

Your front airbags are also advancedairbags. The main purpose of thisfeature is to help prevent airbag-caused injuries to short drivers andchildren who ride in front.

For both advanced airbags to workproperly:

Occupants must sit upright andwear their seat belts properly.

Back-seat passengers should notput their feet under the front seats.

Failure to follow these instructionscould damage the sensors or preventthem from working properly.

If there is a problem with the sensor,the SRS indicator will come on, andthe airbag will inflate in the normalmanner regardless of the driver’sseating position.

The passenger’s advanced frontairbag system has weight sensorsunder the seat. Although Hondadoes not encourage carrying aninfant or small child in front, if thesensors detect the weight of aninfant or small child (up to about 65lbs or 29 kg), the system willautomatically turn the passenger’sfront airbag off.

Do not spill any liquids on orunder the seats, cover the sensors,or put any objects or metal itemsunder the front seats.

Be aware that objects placed on thepassenger’s seat can also cause theairbag to be turned off.

Advanced Airbags


26

DRIVER’SSEATPOSITIONSENSOR

PASSENGER’SSEAT WEIGHTSENSORS

When the airbag is turned off, a‘‘passenger airbag off’’ indicator inthe center of the dashboard comeson (see page ).

Moving the front seat forciblyback against cargo on the seat orfloor behind it.

Hanging heavy items on the frontpassenger seat, or placing heavyitems in the seat-back pocket.

To ensure that the passenger’sadvanced front airbag system willwork properly,

This includes:

A rear passenger pushing orpulling on the back of the frontpassenger’s seat.

If the weight sensors detect there isno passenger in the front seat, theairbag will be off. However, thepassenger airbag off indicator willnot come on.

Also, make sure the floor mat behindthe front passenger’s seat is hookedto the floor mat anchor (see page

). If it is not, the mat mayinterfere with the proper operationof the sensors and operation of theseat.

31203

If equipped


do not do anythingthat would increase or decrease theweight on the front passenger’s seat.

Driver

andP

assengerSafety

27

To get the best protection from theside airbags, front seat occupantsshould wear their seat belts and situpright and well back in their seats.

Only one airbag will deploy during aside impact. If the impact is on thepassenger’s side, the passenger’sside airbag will deploy even if thereis no passenger.

Your vehicle has a side airbag cutoffsystem designed primarily to protecta child riding in the front passenger’sseat.

The side airbag may also shut off if ashort adult leans sideways, or alarger adult slouches and leanssideways into the airbag’sdeployment path.

Objects placed on the frontpassenger seat can also cause theside airbag to be shut off.

If you ever have a moderate tosevere side impact, sensors willdetect rapid acceleration and signalthe control unit to instantly inflateeither the driver’s or the passenger’sside airbag and activate the seat belttensioner on the affected side.

Although Honda does not encouragechildren to ride in front, if sensors inthe seat detect a child has leanedinto the side airbag’s deploymentpath, the airbag will shut off.

How Your Side Airbags Work


Side Airbag Cutoff System

28

If the side airbag off indicator comeson (see page ), have thepassenger sit upright. Once thepassenger is out of the airbag’sdeployment path, the system willturn the airbag back on, and theindicator will go out.

There will be some delay betweenthe moment the passenger movesinto or out of the airbag deploymentpath and when the indicator comeson or goes off.

A front seat passenger should notuse a cushion or other object as abackrest. It may prevent the cutoffsystem from working properly.

If the impact is on the passenger’sside, the passenger’s side curtainairbag will inflate even if there are nooccupants on that side of the vehicle.

To get the best protection from theside curtain airbags, occupantsshould wear their seat belts and situpright and well back in their seats.

In a moderate to severe side impact,sensors will detect rapid accelerationand signal the control unit toinstantly inflate the side curtainairbag and activate the seat belttensioner on the driver’s or thepassenger’s side of the vehicle.

31


How Your Side Curtain AirbagsWork

Driver

andP

assengerSafety

29

SIDE CURTAIN AIRBAG

If the indicator comes on at anyother time, or does not come on at all,you should have the system checkedby your dealer. For example:

This indicator alerts you that thepassenger’s side airbag has beenautomatically shut off. It doesmean there is a problem with yourside airbags.

When you turn the ignition switch tothe ON (II) position, this indicatorcomes on for several seconds thengoes off. This tells you the system isworking properly.

When you turn the ignition switch tothe ON (II) position, the indicatorshould come on for several secondsand then go off (see page ). If itdoesn’t come on, stays on, or comeson while driving without a passengerin the front seat, have the systemchecked.

If you see any of these indications,the airbags and seat belt tensionersmay not work properly when youneed them.

The SRS indicator alertsyou to a potential problem

with your airbags or seat belttensioners (see page ).

If the indicator comes on orflashes on and off while you drive.

If the indicator stays on after theengine starts.

If the SRS indicator does not comeon after you turn the ignitionswitch to the ON (II) position.

59

19

How the SRS Indicator Works How the Side Airbag OffIndicator Works


not

30

U.S. CanadaIgnoring the SRS indicator canresult in serious injury or deathif the airbag systems ortensioners do not work properly.

Have your vehicle checked by adealer as soon as possible ifthe SRS indicator alerts you toa possible problem.

This indicator alerts you that thepassenger’s front airbag has beenshut off because weight sensorsdetect about 65 lbs (29 kg) or less(the weight of an infant or smallchild) on the front passenger’s seat.It does there is a problemwith the airbag.

Be aware that objects placed on thefront seat can cause the indicator tocome on.

If no weight is detected on the frontseat, the airbag will be automaticallyshut off. However, the indicator willnot come on.

The passenger airbag off indicatormay come on and off repeatedly ifthe total weight on the seat is nearthe airbag cutoff threshold.

If an adult or teenage passenger isriding in front, move the seat as farto the rear as possible, and have thepassenger sit upright and wear theseat belt properly.

If the indicator comes on with nofront seat passenger and no objectson the seat, or with an adult ridingthere, something may be interferingwith the weight sensors. Look forand remove:

Any items under the frontpassenger’s seat.

Any object hanging on the seat orin the seat-back pocket.

Any object on the floor that istouching the rear of the seat-back.

If no obstructions are found, haveyour vehicle checked by a dealer assoon as possible.


How the Passenger Airbag OffIndicator Works

not mean

Driver

andP

assengerSafety

31

PASSENGER AIRBAG OFF INDICATOR

Canada

U.S.

Your airbag systems are virtuallymaintenance free, and there are noparts you can safely service.However, you must have yourvehicle serviced if:

Any airbagthat has deployed must bereplaced along with the controlunit and other related parts. Anyseat belt tensioner that activatesmust also be replaced.

Do not try to remove or replaceany airbag by yourself. This mustbe done by an authorized dealer ora knowledgeable body shop.

Take your vehicle to anauthorized dealer as soon aspossible. If you ignore thisindication, your airbags may notoperate properly.

Even if yourairbags do not inflate, your dealershould inspect the driver’s seatposition sensor, the frontpassenger’s weight sensors, thefront seat belt tensioners, and allseat belts worn during the crash tomake sure they are operatingproperly.

Together, airbags andseat belts provide the bestprotection.

Tampering could causethe airbags to deploy, possiblycausing very serious injury.

Airbag Service Additional Safety Precautions

An airbag ever inflates.

The SRS indicator alerts you to aproblem.

If your vehicle has a moderate tosevere impact.

Do not attempt to deactivate yourairbags.

Do not tamper with airbagcomponents or wiring for anyreason.


32

Improperly replacingor covering front seat-back coverscan prevent your side airbags frominflating during a side impact.

This could make thedriver’s seat position sensor or thefront passenger’s weight sensorsineffective. If it is necessary toremove or modify a front seat toaccommodate a person withdisabilities, first contact HondaAutomobile Customer Service at(800) 999-1009.

If water oranother liquid soaks into a seat-back, it can prevent the side airbagcutoff system from workingproperly.

Do not cover or replace front seat-back covers without consultingyour dealer.

Do not remove or modify a frontseat without consulting yourdealer.

Do not expose the front passenger’sseat-back to liquid.


Driver

andP

assengerSafety

33

－－

－

Children depend on adults to protectthem. However, despite their bestintentions, many adults do not knowhow to protect childpassengers.

If you have children, or ever need todrive with a child in your vehicle, besure to read this section. It beginswith important general guidelines,then presents special information forinfants, small children, and largerchildren.

To reduce the number of childdeaths and injuries, every state andCanadian province requires thatinfants and children be properlyrestrained when they ride in avehicle.

(see pages ).(see pages ).

Each year, many children are injuredor killed in vehicle crashes becausethey are either unrestrained or notproperly restrained. In fact, vehicleaccidents are the number one causeof the death of children age 12 andunder.

39 475148

properly

All Children Must Be Restrained

Larger children must be restrainedwith a lap/shoulder belt and ride ona booster seat until the seat belt f itsthem properly

Infants and small children must berestrained in an approved child seatthat is properly secured to thevehicle

Protecting Children General Guidelines

34

Children who are unrestrainedor improperly restrained can beseriously injured or killed in acrash.

Any child too small for a seatbelt should be properlyrestrained in a child seat. Alarger child should be properlyrestrained with a seat belt anduse a booster seat if necessary.

－

If the vehicle seat is toofar forward, or the child’s head isthrown forward during a collision, aninflating front airbag can strike thechild with enough force to kill orvery seriously injure a small child.

According to accident statistics,children of all ages and sizes aresafer when they are restrained in aback seat.The National Highway Traffic SafetyAdministration and TransportCanada recommend that all childrenaged 12 and under be properlyrestrained in a back seat. Somestates have laws restricting wherechildren may ride.

Children who ride in back are lesslikely to be injured by strikinginterior vehicle parts during acollision or hard braking. Also,children cannot be injured by aninflating front airbag when they ridein the back.

Even though your vehicle has anadvanced front airbag system thatautomatically turns the passenger’sfront airbag off (see page ),please follow these guidelines:

Ifthe airbag inflates, it can hit the backof the child seat with enough forceto kill or very seriously injure aninfant.

Whenever possible,larger children should sit in the backseat, on a booster seat if needed, andbe properly restrained with a seatbelt. (See page for importantinformation about protecting largerchildren.)

Front airbags have been designed tohelp protect adults in a moderate tosevere frontal collision. To do this,the passenger’s front airbag is quitelarge, and it can inflate with enoughforce to cause very serious injuries.

31

48

CONTINUED

Placing a forward-facing child seat inthe front seat of a vehicle equippedwith passenger’s front airbag can behazardous.

Never put a rear-facing child seat inthe front seat of a vehicle equippedwith a passenger’s front airbag.

Small Children

Larger Children

Infants

Children who have outgrown childseats are also at risk of being injuredor killed by an inflating passenger’sfront airbag.

All Children Should Sit in a BackSeat

The Passenger’s Front AirbagCan Pose Serious Risks


Driver

andP

assengerSafety

35

－

To remind you of the passenger’sfront airbag hazards, and thatchildren must be properly restrainedin a back seat, your vehicle haswarning labels on the dashboard(U.S. models) and on the front visors.Please read and follow theinstructions on these labels.

Canadian Models

U.S. Models


36

SUN VISORS DASHBOARD

SUN VISORS

－

Many parents say they prefer to putan infant or a small child in the frontpassenger seat so they can watch thechild, or because the child requiresattention.

Placing a child in the front seatexposes the child to hazards in afrontal collision, and paying closeattention to a child distracts thedriver from the important tasks ofdriving, placing both of you at risk.

Your vehicle has a back seat wherechildren can be properly restrained.If you ever have to carry a group ofchildren, and a child must ride infront:

Place the largest child in the frontseat, provided the child is largeenough to wear the lap/shoulderbelt properly (see page ).

Move the vehicle seat as far to therear as possible (see page ).

Have the child sit upright and wellback in the seat (see page ).

Make sure the seat belt is properlypositioned and secured (see page

).

If a child requires close physicalattention or frequent visual contact,we strongly recommend that anotheradult ride with the child in the backseat. The back seat is far safer for achild than the front.

15

14

48

89

If You Must Drive with SeveralChildren

If a Child Requires CloseAttention


Driver

andP

assengerSafety

37

－


If you are not wearing aseat belt in a crash, you could bethrown forward and crush thechild against the dashboard or aseat-back. If you are wearing aseat belt, the child can be tornfrom your arms and be seriouslyhurt or killed.

During a crash, thebelt could press deep into the childand cause serious or fatal injuries.

This can preventchildren from accidentally fallingout (see page ).

Even very youngchildren learn how to unlockvehicle doors, turn on the ignitionswitch, and open the trunk, whichcan lead to accidental injury ordeath.

Childrenwho play in vehicles canaccidentally get trapped inside.Teach your children not to play inor around vehicles. Know how tooperate the emergency trunkopener and decide if your childrenshould be shown how to use thisfeature (see page ).

For example, infants and smallchildren left in a vehicle on a hotday can die from heatstroke. Achild left alone with the key in theignition switch can accidentally setthe vehicle in motion, possiblyinjuring themselves or others.

If a child wraps a looseseat belt around their neck, theycan be seriously or fatally injured.(See pages and for how toactivate and deactivate thelockable retractor.)

Leaving children withoutadult supervision is illegal in moststates and Canadian provinces,and can be very hazardous.

81

45 46

80

Additional Safety Precautions

Never let two children use thesame seat belt.

Never hold an infant or child onyour lap.

Never put a seat belt over yourselfand a child.

Use the childproof door locks toprevent children from opening therear doors.

Keep vehicle keys and remotetransmitters out of the reach ofchildren.

Lock all doors and the trunk whenyour vehicle is not in use.

Make sure any unused seat beltthat a child can reach is buckled,the lockable retractor is activated,and the belt is fully retracted andlocked.

Do not leave children alone in avehicle.


38

When properly installed, a rear-facing child seat may prevent thedriver or a front passenger frommoving their seat as far back asrecommended, or from locking theirseat-back in the desired position.

Two types of seats may be used: aseat designed exclusively for infants,or a convertible seat used in the rear-facing, reclining mode.

If placedfacing forward, an infant could bevery seriously injured during afrontal collision.

A rear-facing child seat can be placedin any seating position in the backseat, but not in the front.

If the passenger’s front airbaginflates, it can hit the back of thechild seat with enough force to kill orseriously injure an infant.

An infant must be properlyrestrained in a rear-facing, recliningchild seat until the child reaches theseat maker’s weight or height limitfor the seat, and the child is at leastone year old.

Only a rear-facing child seat providesproper support for a baby’s head,neck, and back.

It can also interfere with properoperation of the passenger’sadvanced front airbag system.

CONTINUED

Protecting Infants

Child Seat Type

Do not put a rear-facing child seat ina forward-facing position.

Never put arear-facing child seat in the frontseat.

Child Seat Placement

Protecting Infants and Small Children

Driver

andP

assengerSafety

39

Of the different seats available, werecommend those that have a five-point harness system as shown.

In any of these situations, westrongly recommend that you installthe child seat directly behind thefront passenger’s seat, move the seatas far forward as needed, and leave itunoccupied. Or, you may wish to geta smaller rear-facing child seat. We strongly recommend placing a

forward-facing child seat in a backseat, not the front.

If the vehicle seat is toofar forward, or the child’s head isthrown forward during a collision, aninflating airbag can strike the childwith enough force to cause veryserious or fatal injuries.

Even with advanced front airbags,which can automatically turn thepassenger’s front airbag off (seepage ), a back seat is the safestplace for a small child.

A child who is at least one year old,and who fits within the child seatmaker’s weight and height limits,should be restrained in a forward-facing, upright child seat.

We also recommend that a smallchild use the child seat as long aspossible, until the child reaches theweight or height limit for the seat.

31

Protecting Small Children

Child Seat Type

Child Seat Placement

Placing a forward-facing child seat inthe front seat of a vehicle equippedwith a passenger’s airbag can behazardous.

Protecting Infants and Small Children

40

Placing a rear-facing child seatin the front seat can result inserious injury or death if thepassenger’s front airbag inflates.

Always place a rear-facing childseat in the back seat, not thefront.

In seating positions and vehicles notequipped with LATCH, a LATCH-compatible child seat can be installedusing a seat belt.

Whatever type of seat you choose, toprovide proper protection, a childseat should meet threerequirements:

Look for FMVSS213 or CMVSS 213 on the box.

Rear-facing for infants, forward-facing for small children.

When buying a child seat, you needto choose either a conventional childseat, or one designed for use withthe lower anchors and tethers forchildren (LATCH) system.

Conventional child seats must besecured to a vehicle with a seat belt,whereas LATCH-compatible seatsare secured by attaching the seat tohardware built into the two outerseating positions in the back seat.

Since LATCH-compatible child seatsare easier to install and reduce thepossibility of improper installation,we recommend selecting this style.

If it is necessary to put a forward-facing child seat in the front, movethe vehicle seat as far to the rear aspossible, and be sure the child seat isfirmly secured to the vehicle and thechild is properly strapped in the seat.

CONTINUED

The child seat should meet U.S. orCanadian Motor Vehicle SafetyStandard 213.

The child seat should be of theproper type and size to fit the child.

The child seat should fit thevehicle seating position (orpositions) where it will be used.

1.

2.

3.

Selecting a Child Seat

Protecting Infants and Small Children, Selecting a Child Seat

Driver

andP

assengerSafety

41

Placing a forward-facing childseat in the front seat can resultin serious injury or death if thefront airbag inflates.

If you must place a forward-facing child seat in front, movethe vehicle seat as far back aspossible, and properly restrainthe child.

A child seat secured with a seat beltshould be installed as firmly aspossible. However, it does not needto be ‘‘rock solid.’’ Some side-to-side

movement can be expected andshould not reduce the child seat’seffectiveness.

Before purchasing a conventionalchild seat, or using a previouslypurchased one, we recommend thatyou test the seat in the specificvehicle seating position or positionswhere the seat will be used.

After installing a childseat, push and pull the seatforward and from side-to-side toverify that it is secure.

All child seats must besecured to the vehicle with the lappart of a lap/shoulder belt or withthe LATCH (lower anchors andtethers for children) system. Achild whose seat is not properlysecured to the vehicle can beendangered in a crash.

After selecting a proper child seatand a good place to install the seat,there are three main steps ininstalling the seat: If the child seat is not secure, try

installing it in a different seatingposition, or use a different style ofchild seat that can be firmly secured.

Make sure the child is properlystrapped in the child seataccording to the child seat maker’sinstructions. A child who is notproperly secured in a child seatcan be seriously injured in a crash.

The following pages provideguidelines on how to properly installa child seat. A forward-facing childseat is used in all examples, but theinstructions are the same for a rear-facing child seat.

Make sure the child seat is firmlysecured.

Properly secure the child seat tothe vehicle.

Secure the child in the child seat.

1.

2.

3.

Installing a Child Seat

Selecting a Child Seat, Installing a Child Seat

42

Your vehicle is equipped withLATCH (lower anchors and tethersfor children) at the outer rear seats.

To install a LATCH-compatible childseat:

Place the child seat on the vehicleseat, then attach the seat to thelower anchors according to thechild seat maker’s instructions.

Some LATCH-compatible seatshave a rigid-type connector asshown above.Make sure there are no objects

near the anchors that couldprevent a secure connectionbetween the child seat and theanchors.

Move the seat belt buckle ortongue away from the loweranchors.

The lower anchors are locatedbetween the seat-back and seatbottom, and are to be used only witha child seat designed for use withLATCH.

The location of each lower anchor isindicated by a small button above theanchor point.

1.

2.

3.

CONTINUED

Installing a Child Seat withLATCH


Driver

andP

assengerSafety

43

Rigid type

BUTTON

LOWER ANCHORS

Other LATCH-compatible seats havea flexible-type connector as shownabove.

Whatever type you have, followthe child seat maker’s instructionsfor adjusting or tightening the fit.

Lift the head restraint (see page), then route the tether strap

through the legs of the headrestraint and over the seat-back,making sure the strap is nottwisted.

Attach the tether strap hook to thetether anchor, then tighten thestrap as instructed by the childseat maker.

Push and pull the child seatforward and from side-to-side toverify that it is secure.

If the tether strap is too long andcannot be tightened firmly, find aroute where the strap can betightened securely.

Tighten the strap according to theseat maker’s instructions.

6.

5.

4.

7.

90

8.


44

Flexible type

Front

ANCHOR

TETHER STRAP HOOK

When not using the LATCH system,all child seats must be secured to thevehicle with the lap part of a lap/shoulder belt.

With the child seat in the desiredseating position, route the beltthrough the child seat accordingto the seat maker’s instructions,then insert the latch plate into thebuckle.

To activate the lockable retractor,slowly pull the shoulder part of thebelt all the way out until it stops,then let the belt feed back into theretractor.

After the belt has retracted, tug onit. If the belt is locked, you will notbe able to pull it out. If you can pullthe belt out, it is not locked, andyou will need to repeat these steps.

In addition, the lap/shoulder belts inall seating positions except thedriver’s have a lockable retractorthat must be activated to secure achild seat.

1. 2.

3.

CONTINUED

Installing a Child Seat with a Lap/Shoulder Belt


Driver

andP

assengerSafety

45

After confirming that the belt islocked, grab the shoulder part ofthe belt near the buckle, and pullup to remove any slack from thelap part of the belt. Remember, ifthe lap part of the belt is not tight,the child seat will not be secure.

Push and pull the child seatforward and from side-to-side toverify that it is secure enough tostay upright during normal drivingmaneuvers. If the child seat is notsecure, unlatch the belt, allow it toretract fully, then repeat thesesteps.

To remove slack, it may help toput weight on the child seat, orpush on the back of the seat whilepulling up on the belt.

To deactivate the lockable retractorand remove a child seat, unlatch thebuckle, unroute the seat belt, and letthe belt fully retract.

A child seat with a tether can beinstalled in any seating position inthe back seat, using one of theanchorage points shown above.

Since a tether can provide additionalsecurity to the lap/shoulder beltinstallation, we recommend using atether whenever one is required oravailable.

4. 5.

Installing a Child Seat with aTether


46

COVER

ANCHORAGE POINTS

ANCHOR

After properly securing the childseat (see page ), lift the headrestraint, then route the tetherstrap over the seat-back andthrough the head restraint legs.

If the tether strap is too long andcannot be tightened firmly, find aroute where the strap can betightened securely.

Lift the anchor cover, then attachthe tether strap hook to theanchor, making sure the strap isnot twisted.

Tighten the strap according to theseat maker’s instructions.

1. 2.

3.

45


Driver

andP

assengerSafety

47

Front

ANCHORANCHOR

FrontOuter Position Center Position

TETHER STRAP HOOK TETHER STRAP HOOK

To determine if a lap/shoulder beltproperly fits a child, have the childput on the seat belt, then askyourself:

Does the child sit all the way backagainst the seat?

Do the child’s knees bendcomfortably over the edge of theseat?

When a child reaches therecommended weight or height limitfor a forward-facing child seat, thechild should sit in a back seat on abooster seat and wear a lap/shoulderbelt.

The following pages giveinstructions on how to check properseat belt fit, what kind of boosterseat to use if one is needed, andimportant precautions for a childwho must sit in front.

1.

2.

Checking Seat Belt Fit

Protecting Larger Children

48

Allowing a child age 12 or underto sit in front can result in injuryor death if the passenger’s frontairbag inflates.

If a child must ride in front,move the vehicle seat as farback as possible, use a boosterseat if needed, have the childsit up properly and wear theseat belt properly.

Does the shoulder belt crossbetween the child’s neck and arm?

Is the lap part of the belt as low aspossible, touching the child’sthighs?

Will the child be able to stayseated like this for the whole trip?

If you answer yes to all thesequestions, the child is ready to wearthe lap/shoulder belt correctly. Ifyou answer no to any question, thechild needs to ride on a booster seat. A child who has outgrown a forward-

facing child seat should ride in aback seat and use a booster seatuntil the lap/shoulder belt fits themproperly without the booster.

Some states and Canadian provincesalso require children to use a boosterseat until they reach a given age orweight (e.g., 6 years or 60 lbs). Besure to check current laws in thestates or provinces where you intend

to drive.

Booster seats can be high-back orlow-back. Whichever style you select,make sure the booster seat meetsfederal safety standards (see page

) and that you follow the boosterseat maker’s instructions.

A child may continue using a boosterseat until the tops of their ears areeven with the top of the vehicle’s orbooster’s seat-back. A child of thisheight should be tall enough to usethe lap/shoulder belt without abooster seat.

If a child who uses a booster seatmust ride in front, move the vehicleseat as far back as possible, and besure the child is wearing the seatbelt properly.

3.

4.

5.41

Using a Booster Seat


Driver

andP

assengerSafety

49

If the passenger’s front airbaginflates in a moderate to severefrontal collision, the airbag can causeserious injuries to a child who isunrestrained, improperly restrained,sitting too close to the airbag, or outof position.

A side airbag also poses risks. If anypart of a larger child’s body is in thepath of a deploying side airbag, thechild could receive possibly seriousinjuries.

Physically, a child must be largeenough for the lap/shoulder belt toproperly fit (see pages and ). Ifthe seat belt does not fit properly,with or without the child sitting on abooster seat, the child should not sitin front.

To safely ride in front, a child mustbe able to follow the rules, includingsitting properly, and wearing the seatbelt properly throughout a ride.

If you decide that a child can safelyride up front, be sure to:

Carefully read the owner’s manual,and make sure you understand allseat belt instructions and all safetyinformation.

Move the vehicle seat to the rear-most position.

Have the child sit up straight, backagainst the seat, and feet on ornear the floor.

Check that the child’s seat belt isproperly and securely positioned.

Of course, children vary widely. Andwhile age may be one indicator ofwhen a child can safely ride in front,there are other important factors youshould consider.

The National Highway Traffic SafetyAdministration and TransportCanada recommend that all childrenage 12 and under be properlyrestrained in the back seat.

Supervise the child. Even a maturechild sometimes needs to bereminded to fasten the seat belt orsit properly.

14 48

When Can a Larger Child Sit inFront

Physical Size

Maturity


50

This could resultin serious neck injuries during acrash.

This couldcause very serious injuries duringa crash. It also increases thechance that the child will slideunder the belt in a crash and beinjured.


Devices intended toimprove a child’s comfort orreposition the shoulder part of aseat belt can make the belt lesseffective and increase the chanceof serious injury in a crash.

Additional Safety PrecautionsDo not let a child wear a seat beltacross the neck.

Do not let a child put the shoulderpart of a seat belt behind the backor under the arm.

Two children should never use thesame seat belt.

Do not put any accessories on aseat belt.


Driver

andP

assengerSafety

51

Your vehicle’s exhaust containscarbon monoxide gas. Carbonmonoxide should not enter thevehicle in normal driving if youmaintain your vehicle properly andfollow the information on this page.

High levels of carbon monoxide cancollect rapidly in enclosed areas,such as a garage. Do not run theengine with the garage door closed.Even with the door open, run theengine only long enough to move thevehicle out of the garage.

If you must sit in your parked vehiclewith the engine running, even in anunconfined area, adjust the heatingand cooling system as follows:

The vehicle is raised for an oilchange.

Have the exhaust system inspectedfor leaks whenever:

You notice a change in the soundof the exhaust.

The vehicle was in an accidentthat may have damaged theunderside.

With the trunk open, airflow can pullexhaust gas into your vehicle’sinterior and create a hazardouscondition. If you must drive with thetrunk open, open all the windows,and set the heating and coolingsystem as shown below.

Select the fresh air mode.Select the mode.Set the fan speed to high.Set the temperature control to acomfortable setting.

1.2.3.4.

Carbon Monoxide Hazard

52

Carbon monoxide gas is toxic.Breathing it can causeunconsciousness and even killyou.

Avoid any enclosed areas oractivities that expose you tocarbon monoxide.

These labels are in the locationsshown. They warn you of potentialhazards that could cause seriousinjury. Read these labels carefully.

If a label comes off or becomes hardto read (except for the U.S.dashboard label, which is removedby the owner), contact your dealerfor a replacement.

U.S. models

Canadian models

U.S. models only

Safety Labels

Driver

andP

assengerSafety

53

DASHBOARD

RADIATOR CAP

SUN VISORS

Canadian modelsU.S. modelsU.S. models

Canadian models

Canadian models

U.S. models

Safety Labels

54

HOOD DOORJAMBSHOOD

This section gives information aboutthe controls and displays thatcontribute to the daily operation ofyour vehicle. All the essentialcontrols are within easy reach.

...........................Control Locations . 56............................Instrument Panel . 57

..........Instrument Panel Indicators . 58.............................................Gauges . 64

.....................................Odometer . 64..............Display Change Button . 65

.................Current Fuel Mileage . 65...................Temperature Gauge . 65

...................................Trip Meter . 66................Average Fuel Mileage . 66

..................................Fuel Gauge . 66Outside Temperature

...................................Indicator . 67..........Check Fuel Cap Indicator . 68

..................Maintenance Minder . 68.........IMA Battery Level Gauge . 69

................Charge/Assist Gauge . 70Controls Near the Steering

...........................................Wheel . 71.Windshield Wipers and Washers . 72

...........Turn Signal and Headlights . 73............Daytime Running Lights . 74

........Instrument Panel Brightness . 74.................Hazard Warning Button . 74.................Rear Window Defogger . 75

..........Steering Wheel Adjustment . 75

...............................Keys and Locks . 76........................Immobilizer System . 78

................................Ignition Switch . 79......................................Door Locks . 80

......................Power Door Locks . 80..............Childproof Door Locks . 81

.Auto Door Locking/Unlocking . 81.....................Auto Door Locking . 81

.................Auto Door Unlocking . 83................................................Trunk . 86

........Emergency Trunk Opener . 86.......................Remote Transmitter . 87

.................................................Seats . 89..............................Power Windows . 92

.............................................Mirrors . 93.................................Parking Brake . 94

...........Interior Convenience Items . 95.........................Beverage Holder . 96

...........Accessory Power Socket . 96....................................Glove Box . 96

...............Console Compartment . 96.................................Interior Lights . 97

Instruments and Controls

Instruments

andC

ontrols

55

Control Locations

56

POWER WINDOWSWITCHES

MIRROR CONTROLS

FUEL FILL DOORRELEASE HANDLE(P. 151)

INSTRUMENT PANEL INDICATORSGAUGES

AUDIO SYSTEM

POWER DOOR LOCKMASTER SWITCH


(P. 106)(P. 58)(P. 64)

(P. 93)

(P. 80)

(P. 92)

(P. 80)

(P. 100)

DOOR LOCK TAB

TRUNK RELEASEHANDLE(P. 86)

AUTOMATIC TRANSMISSION (CVT)(P. 143)AUXILIARY INPUT JACK

(P. 166)

ACCESSORY POWERSOCKET (P. 96)

CLIMATE CONTROLSYSTEM

＊ The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.

Instrument Panel

Instruments

andC

ontrols

57

CHARGING SYSTEMINDICATOR

SUPPLEMENTAL RESTRAINTSYSTEM INDICATOR

TRUNK-OPENINDICATOR

LOW OIL PRESSUREINDICATOR

CRUISE MAININDICATOR

CRUISE CONTROLINDICATOR

IMA SYSTEM INDICATOR

HIGH BEAMINDICATOR

MALFUNCTION INDICATOR LAMP

(P. 60) (P. 60)

IMMOBILIZER SYSTEMINDICATOR

AUTO IDLE STOP INDICATOR

SECURITY SYSTEM INDICATOR(P. 62)

LOW FUEL INDICATOR(P. 61)

(P. 61)

(P. 61)

(P. 62)

DAYTIME RUNNING LIGHTSINDICATOR (P. 60) (P. 60)

(P. 62)(P. 59)

MAINTENANCE MINDERINDICATOR (P. 61)

SEAT BELT REMINDERINDICATOR

SIDE AIRBAG OFFINDICATOR

LIGHTS ONINDICATOR

(P. 62, 227)

(P. 62, 228)

(P. 62, 170, 171)

(P. 30, 59)

(P. 30, 59)

ANTI-LOCK BRAKESYSTEM (ABS)INDICATOR (P. 59)

(P. 18, 58)

DOOR-OPEN INDICATOR(P. 60)

BRAKE SYSTEMINDICATOR (AMBER)(P. 63)

ELECTRIC POWERSTEERING (EPS)INDICATOR

PARKING BRAKE ANDBRAKE SYSTEMINDICATOR (RED)(P. 58, 230)

(P. 63)

The instrument panel has manyindicators to give you importantinformation about your vehicle.

If it stays on after you have fullyreleased the parking brake whilethe engine is running, or if itcomes on while driving, therecould be a problem with the brakesystem. For more information, seepage .This indicator reminds you and your

passengers to fasten your seat belts.

If your front passenger does notfasten their seat belt, the indicatorcomes on about 6 seconds after theignition switch is turned to the ON(II) position.

If either of you do not fasten yourseat belt while driving, the beeperwill sound and the indicator will flashagain at regular intervals. For moreinformation, see page .

This indicator has two functions:

It comes on when you turn theignition switch to the ON (II)position. It is a reminder to checkthe parking brake. A beepersounds if you drive with theparking brake not fully released.Driving with the parking brake notfully released can damage thebrakes and tires.

If you turn the ignition switch to theON (II) position before fasteningyour seat belt, the beeper soundsand the indicator flashes. If you donot fasten your seat belt before thebeeper stops, the indicator stopsflashing but remains on.

1.

2.

230

18

Instrument Panel Indicators

Seat Belt ReminderIndicator

Parking Brakeand BrakeSystemIndicator (Red)

58

U.S. Canada

This indicator normally comes on fora few seconds when you turn theignition switch to the ON (II)position. If it comes on at any othertime, there is a problem with theABS. If this happens, have yourvehicle checked at a dealer. Withthis indicator on, your vehicle stillhas normal braking ability but noanti-lock function. For moreinformation, see page .

This indicator comes on for severalseconds when you turn the ignitionswitch to the ON (II) position. If itcomes on at any other time, itindicates a potential problem withyour front airbags. This indicator willalso alert you to a potential problemwith your side airbags, passenger’sside airbag automatic cutoff system,side curtain airbags, automatic seatbelt tensioners, driver’s seat positionsensor, or the front passenger’sweight sensors. For moreinformation, see page .

This indicator comes on for severalseconds when you turn the ignitionswitch to the ON (II) position. If itcomes on at any other time, itindicates that the passenger’s sideairbag has automatically shut off.For more information, see page .

This indicator comes on briefly whenyou turn the ignition switch to theON (II) position. It will then go off ifyou have inserted a properly-codedignition key. If it is not a properly-coded key, the indicator will blink,and the engine’s fuel system will bedisabled (see page ).30 78

174

30

Supplemental RestraintSystem Indicator

Immobilizer SystemIndicator

Anti-lock Brake System(ABS) Indicator

Side Airbag OffIndicator


Instruments

andC

ontrols

59

U.S. Canada

The left or right turn signal indicatorblinks when you signal a lane changeor turn. If an indicator does not blinkor blinks rapidly, it usually meansone of the turn signal bulbs isburned out (see pages and ).Replace the bulb as soon as possible,since other drivers cannot see thatyou are signaling.

When you press the hazard warningbutton, both turn signal indicatorsand all turn signals on the outside ofthe vehicle flash.

If this indicator comes on when theignition switch is turned to the ON(II) position and the parking brake isreleased, it means there is a problemin a circuit. Have your vehiclechecked by your dealer.

This indicator comes on with thehigh beam headlights. For moreinformation, see page .

This indicator also comes on withreduced brightness when thedaytime running lights (DRL) are on(see page ).

This indicator reminds you that theexterior lights are on. It comes onwhen the light switch is in either the

or position. If you turn theignition switch to the ACCESSORY(I) or the LOCK (0) position withoutturning off the light switch, thisindicator will remain on. A reminderchime will also sound when you openthe driver’s door and remove the keyfrom the ignition switch.

This indicator comes on if the trunklid is not closed tightly.

This indicator comes on if any dooris not closed tightly.

199 200

73

74


Turn Signal andHazard WarningIndicators

Lights On Indicator‘‘Daytime RunningLights’’ Indicator

High Beam Indicator

Trunk-open Indicator

Door-open Indicator

60

This indicator comes on when youturn on the cruise control system bypressing the CRUISE button (seepage ).

This indicator comes on when youset the cruise control. See page

for information on operating thecruise control.

This indicator comes on when thewasher fluid level is low. Add washerfluid when you see this indicatorcome on (see page ).

This indicator reminds you that it istime to take your vehicle in forscheduled maintenance. Themaintenance main items and subitems will be displayed in theinformation display. See page formore information on themaintenance minder.

This indicator goes off when yourdealer resets it after completing therequired maintenance service.

This indicator is in the fuel gauge. Itcomes on as a reminder that youmust refuel soon. When the indicatorcomes on, there is about 0.9 US gal(3.5 ) of fuel remaining in the tankbefore the reading reaches E. Thereis a small reserve of fuel remainingin the tank when the reading doesreach E.

145

145

194

179

Canadian models only


Cruise Main Indicator Maintenance MinderIndicator

Cruise Control Indicator

Washer Level Indicator

Low Fuel Indicator

Instruments

andC

ontrols

61

The engine can be severely damagedif this indicator flashes or stays onwhen the engine is running. Formore information, see page .

If this indicator comes on when theengine is running, the battery is notbeing charged. For more information,see page .

See page . This indicator normally comes on fora few seconds when you turn theignition switch to the ON (II)position. If it comes on at any othertime, it indicates a problem in theintegrated motor assist (IMA)system. With the IMA indicator on,the vehicle may not accelerate as itnormally does. Have the vehiclechecked by the dealer as soon aspossible.

See pages and .

This indicator comes on when thesecurity system is set. For moreinformation, see page .

229

227

228 170 171144


Security System Indicator Malfunction IndicatorLamp

Low Oil PressureIndicator

Charging SystemIndicator

IMA System Indicator

Auto Idle Stop Indicator

62

SECURITY SYSTEM INDICATOR

If you turn the steering wheel to thefull left or right position repeatedlywhile stopping or driving at very lowspeed, you may feel slightly hardersteering due to overheating of thesteering gear box.

This indicator normally comes onwhen you turn the ignition to the ON(II) position and goes off after theengine starts. If it comes on at anyother time, there is a problem in theelectric power steering system. Ifthis happens, stop the vehicle in asafe place and turn off the engine.Reset the system by restarting theengine. The indicator will not turnoff immediately. If it does not go offafter driving a short distance, orcomes on again while driving, takethe vehicle to your dealer to have itchecked. With the indicator on, theEPS may be turned off, making thevehicle harder to steer.

This indicator normally comes on fora few seconds when you turn theignition switch to the ON (II)position. When the brake systemindicator (amber) is on, there is theproblem with the CooperativeControl with regenerative brake,Creep Aid System or Brake Assist(the normal brake operates properly).Have your vehicle checked by yourdealer.For more information, see page .

Continuously driving under thoseconditions could damage the powersteering system.

173

Electric Power Steering(EPS) Indicator

Brake SystemIndicator(Amber)


Instruments

andC

ontrols

63

U.S. Canada

To switch the information displaybetween the odometer, trip meter,outside temperature, and engine oillife and maintenance item code(s),press the SEL/RESET buttonrepeatedly.

The odometer shows the totaldistance your vehicle has beendriven. It measures in miles orkilometers. It is illegal under U.S.federal law and Canadian provincialregulations to disconnect, reset, oralter the odometer with the intent tochange the number of miles orkilometers indicated.

Gauges

Odometer

64

TRIP METER

SEL/RESET BUTTON DISPLAY CHANGE BUTTON

TACHOMETER

INSTRUMENT PANEL BRIGHTNESS CONTROL BUTTONS

INFORMATIONDISPLAY

FUEL GAUGE

ODOMETER/OUTSIDETEMPERATURE INDICATOR

CURRENT FUEL MILEAGE/TEMPERATURE GAUGE

SPEEDOMETER

Every time you press the displaychange button, the display changesfrom the current fuel mileage to thetemperature gauge, or from thetemperature gauge to the currentfuel mileage.

Press and hold the display changebutton until you hear a beep. Eachtime you press the button, thespeedometer, trip meter, averagefuel mileage and current fuelmileage readings switches theirmeasures.

Depending on the selected measures(mph or km/h), the trip meter andodometer readings are shown withmiles or km. The average fuelmileage and current fuel mileage areshown with mpg or l/100 km.

This display shows the current, orinstant fuel mileage you are getting.

It shows the number of mpg or l/100km.

This shows the temperature of theengine’s coolant. During normaloperation, the reading should be inthe middle of the gauge. In severedriving conditions, such as very hotweather or a long period of uphilldriving, the reading may reach nearthe red mark. If it reaches the red(Hot) mark, pull safely to the side ofthe road. See page forinstructions and precautions onchecking the engine’s coolingsystem.

225

Gauges

Display Change Button Current Fuel Mileage Temperature Gauge

Instruments

andC

ontrols

65

When either of the trip meters (tripA or trip B) is displayed, yourvehicle’s average fuel mileage sinceyou last reset that trip meter can beshown on the information display(mpg or l/100km). This number isupdated once per 10 seconds. To seethe average fuel mileage, press andrelease the SEL/RESET buttonrepeatedly.

This shows how much fuel you have.It may show slightly more or lessthan the actual amount.

The average fuel mileage will bereset when you reset the trip meter,or if the vehicle’s battery goes deador is disconnected.

This meter shows the number ofmiles or kilometers driven since youlast reset it.

There are two trip meters: TRIP Aand TRIP B. Switch between thesedisplays by pressing the SEL/RESET button repeatedly.

Each trip meter works independently,so you can keep track of twodifferent distances.

To reset a trip meter, display it, andthen press and hold the SEL/RESETbutton until the number resets to‘‘0.0.’’

Average Fuel Mileage Fuel GaugeTrip Meter

Gauges

66

Avoid driving with an extremely lowf uel level. Running out of f uel couldcause the engine to misf ire, damagingthe catalytic converter.

± ±

－－－－－－－－

If the outside temperature isincorrectly displayed, you can adjustit up to 5°F ( 3°C) warmer orcooler.

NOTE: The temperature must bestabilized before doing thisprocedure.

Select the outside temperaturedisplay, then press the SEL/RESETbutton for 10 seconds. The followingsequence will appear for 1 secondeach: 0, 1, 2, 3, 4, 5, 5, 4, 3, 2,

1, 0 (U.S.) or 0, 1, 2, 3, 3, 2,1, 0 (Canada).

In certain weather conditions,temperature readings near freezing(32°F, 0°C) could mean that ice isforming on the road surface.

When it reaches the desired value,release the SEL/RESET button. Youshould see the new outsidetemperature displayed.

This indicator displays the outsidetemperature in Fahrenheit (U.S.models) or Centigrade (Canadianmodels). To see the outsidetemperature, press and release theSEL/RESET button until thetemperature is shown on theinformation display.

The temperature sensor is in thefront bumper. Therefore, thetemperature reading can be affectedby heat reflection from the roadsurface, engine heat, and theexhaust from surrounding traffic.This can cause an incorrecttemperature reading when yourspeed is under 19 mph (30 km/h).

The sensor delays the display updateuntil it reaches the correct outsidetemperature. This may take severalminutes.

Gauges

Outside Temperature Indicator

Instruments

andC

ontrols

67

The information display in theinstrument panel shows you theengine oil life and maintenanceservice items when the ignitionswitch is in the ON (II) position. Thisinformation helps to keep you awareof the periodic maintenance yourvehicle needs for continued trouble-free driving. Refer to page formore information.

Your vehicle’s on board diagnosticsystem will detect a loose or missingfuel fill cap as an evaporative systemleak. The first time a leak is detecteda ‘‘CHECK FUEL CAP’’ messageappears on the information display.Turn the engine off, and confirm thefuel fill cap is installed. If it is, loosenit, then retighten it until it clicks atleast once. The message should gooff after several days of normaldriving once you tighten or replacethe fuel fill cap. To scroll to anotherdisplay, press the SEL/RESETbutton. The ‘‘CHECK FUEL CAP’’message will appear each time yourestart the engine until the systemturns the message off.

If the system still detects a leak inthe vehicle’s evaporative emissionssystem, the malfunction indicatorlamp (MIL) comes on. If the fuel fillcap was not already tightened, turnthe engine off, and check orretighten the fuel fill cap until itclicks at least once. The MIL shouldgo off after several days of normaldriving once the cap is tightened orreplaced. If the MIL does not go off,have your vehicle inspected by adealer. For more information, seepage .

179

229

Gauges

Maintenance MinderCheck Fuel Cap Message

68

This gauge shows you the state ofcharge of the battery for theIntegrated Motor Assist (IMA). Thisbattery is recharged by the IMAmotor, and discharged by the IMAwhen it is assisting the engine withpowering the vehicle.

The battery level gauge does notread the battery level directly. Itcalculates the level by continuouslymeasuring the current flow, voltage,and temperature.

Since the level is not read directly,small sensing errors can, over time,cause the gauge to read higher thanthe actual battery level. The systemwill then perform a correction, andthe battery level gauge reading willdrop suddenly. When this happens,IMA assist and Auto Idle Stop aredisabled until the IMA battery issufficiently recharged by normaldriving. This should take only a fewminutes.

This correction of the battery levelgauge is normal and does notindicate a problem. If the IMAbattery develops a problem orbecomes deteriorated, the IMAsystem indicator will come on. If thishappens, have the vehicle checkedby your dealer as soon as possible.

The gauge reading may drop nearthe bottom under driving conditionsthat require IMA motor assistancefor a long time, such as prolonged

acceleration or climbing a long hill.The IMA motor will recharge thebattery as you continue driving.

If the battery is mostly discharged,the Auto Idle Stop function isdisabled (see page ).170

IMA Battery Level Gauge

Gauges

Instruments

andC

ontrols

69

BATTERY LEVEL GAUGE

This gauge shows you the status ofthe Integrated Motor Assist (IMA).When the IMA battery is beingcharged, the bottom side of thegauge illuminates. When the IMA isassisting the engine, the upper sideof the gauge illuminates.

If the IMA battery is too hot or toocold, the IMA system limits the IMAbattery’s output power to protect thebattery. This disables the IMA assistand Auto Idle Stop, even though theBattery Level Gauge may show thatthe battery is well-charged.Therefore, if the motor assist isfrequently used, the batterybecomes hot and starts to limit itsoutput power.

It takes the IMA system a fewminutes in cold weather to normalizethe IMA battery’s output power, andabout 15 minutes in hot weather.

Charge/Assist Gauge

Gauges

70

IMA ASSIST GAUGE

IMA CHARGE GAUGE

＊

＊＊

＊＊＊ Only on vehicles equipped with navigation system. Refer to the navigation system manual.

To use the horn, press the pad around the ‘‘H’’ logo.Canadian model only

:1 :2 :

Controls Near the Steering Wheel

Instruments

andC

ontrols

71

SEL/RESET BUTTON

HORN

(P. 143)

DISPLAY CHANGE BUTTON(P. 65)

Vehicle with navigation system is shown.

REMOTE AUDIO CONTROLS

(P. 74)

(P. 64)

(P. 73)

INSTRUMENT PANEL BRIGHTNESS

VOICE CONTROLSWITCHES HEATED MIRRORS

REAR WINDOWDEFOGGER

(P. 31)

PASSENGER AIRBAGOFF INDICATOR

HAZARD WARNINGBUTTON(P. 74)

(P. 75)

HOOD RELEASE HANDLE(P. 152)

WINDSHIELD WIPERS/WASHERS(P. 72)

(P. 94)

STEERING WHEELADJUSTMENT (P. 75)

CRUISE CONTROL BUTTONS(P. 145)

HEADLIGHTS/TURNSIGNAL

21

－－－

－

－

－

－

－

－

MISTOFFINT IntermittentLO Low speedHI High speedWindshield washers

Push the right lever up or down toselect a position.

The wipers run at highspeed until you release thelever.

The wipers are not activated.

The length of the wiperinterval is variedautomatically according tothe vehicle’s speed.

Vary the delay by turning the INTTIME ring.If you turn it to the shortest delay,the wipers will change to lowspeed operation when the vehiclespeed exceeds 12 mph (20 km/h).

The wipers run at low speed.

The wipers run at high speed.

While the vehicle is stopped and ingear, the wipers sweep thewindshield whenever you removeyour foot from the brake pedal.

Pull thewiper control lever toward you,and hold it. The washers sprayuntil you release the lever. Thewipers run at low speed, thencomplete one more sweep afteryou release the lever.

1.2.3.4.5.6.

MIST

OFF

INT

LO

HI

Windshield Washers

Windshield Wipers and Washers

72

－

－

－

Push down on thelever to signal a left turn and up tosignal a right turn. To signal a lanechange, push lightly on the lever,and hold it. The lever will return tocenter when you release it orcomplete a turn.

Turning the switch tothe ‘‘ ’’ position turns on theparking lights, taillights, instrumentpanel lights, side-marker lights, andrear license plate lights.

Turn signalOffParking and interior lightsHeadlightsHigh beamsFlash high beams

Turning the switch to the ‘‘ ’’position turns on the headlights.

If you leave the lights on with thekey removed from the ignitionswitch, you will hear a reminderchime when you open the driver’sdoor.

When the light switch is in the‘‘ ’’ or ‘‘ ’’ position, thelights on indicator comes on as areminder. This indicator stays on ifyou leave the light switch on andturn the ignition switch to theACCESSORY (I) or the LOCK (0)position.

Push the leverforward and the high beam indicatorwill come on (see page ). Pull itback to return to low beams.

To flash the high beams, pull thelever back lightly, then release it.The high beams will stay on as longas you hold the lever back.

1.2.3.4.5.6.

60

Turn Signal

Headlights

High Beams

Turn Signals and Headlights

Instruments

andC

ontrols

73

＋－

The buttons under the left side ventcontrol the brightness of theinstrument panel. Push the orbutton to adjust the brightness.

Push the button to turn on thehazard warning lights (four-wayflashers). This causes all fouroutside turn signals and both turnindicators in the instrument panel toflash. Use the hazard warning lightsif you need to park in a dangerousarea near heavy traffic, or if yourvehicle is disabled.

Separate adjustments can be madewhen the headlights are on and off.

With the headlight switch off orposition, the high beam

headlights come on with reducedbrightness when you turn theignition switch to the ON (II)position and release the parkingbrake. They remain on until you turnthe ignition switch off, even if youset the parking brake.

The headlights revert to normaloperation when you turn them onwith the switch.

Daytime Running Lights Instrument Panel Brightness Hazard Warning Button

Headlights, Instrument Panel Brightness, Hazard Warning Button

74

INSTRUMENT PANEL BRIGHTNESSCONTROL BUTTONS

The rear window defogger will clearfog, frost, and thin ice from thewindow. Push the defogger button toturn it on and off. The indicator inthe button comes on to show thedefogger is on. If you do not turn itoff, the defogger will shut itself offafter about 15 minutes. It also shutsoff when you turn off the ignitionswitch. You have to turn thedefogger on again when you restartthe vehicle.

Make sure the rear window is clearand you have good visibility beforestarting to drive.

Make any steering wheel adjustmentbefore you start driving.

The defogger wires on the inside ofthe rear window can be accidentallydamaged. When cleaning the glass,always wipe side-to-side.

Pushing this button also turns themirror heaters on or off. For moreinformation, see page .94

CONTINUED

On Canadian models

Rear Window Defogger Steering Wheel Adjustment

Rear Window Defogger, Steering Wheel Adjustment

Instruments

andC

ontrols

75

Canadianmodel

U.S. model Adjusting the steering wheelposition while driving maycause you to lose control of thevehicle and be seriously injuredin a crash.

Adjust the steering wheel onlywhen the vehicle is stopped.

Push the lever under the steeringcolumn all the way down.

Move the steering wheel up ordown and in or out to the desiredposition. Make sure you can seethe instrument panel gauges andthe indicators.

Push the lever up to lock thesteering wheel in that position.

Make sure you have securelylocked the steering wheel in placeby trying to move it up, down, in,and out.

The master key fits all the locks onyour vehicle.

1.

4.

2.

3.

Steering Wheel Adjustment, Keys and Locks

76

KEYNUMBERTAG

VALETKEY(Gray)

U.S. model

MASTER KEYSWITH REMOTETRANSMITTER

Protect the keys from directsunlight, high temperature, andhigh humidity.

Do not drop the keys or set heavyobjects on them.

Keep the keys away from liquids.If they get wet, dry themimmediately with a soft cloth.

The keys without a remotetransmitter do not contain batteries.Do not try to take them apart.

These keys contain electroniccircuits that are activated by theimmobilizer system. They will notwork to start the engine if thecircuits are damaged.

The valet key works only in theignition and the door locks. You cankeep the trunk and trunk releasehandle locked when you leave yourvehicle and the valet key at a parkingfacility.

You should have received a keynumber tag with your keys. You willneed this key number if you everhave to get a lost key replaced. Useonly Honda-approved key blanks.

Keys and Locks

Instruments

andC

ontrols

77

KEYNUMBERTAG

VALETKEY(Gray)

Canadian model

MASTER KEYSWITH REMOTETRANSMITTER

If the system repeatedly does notrecognize the coding of your key,contact your dealer.

Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour vehicle undrivable.

If you have lost your key and cannotstart your engine, contact yourdealer.

When you turn the ignition switch tothe ON (II) position, the immobilizersystem indicator should come onbriefly, then go off. If the indicatorstarts to blink, it means the systemdoes not recognize the coding of thekey. Turn the ignition switch to theLOCK (0) position, remove the key,reinsert it, and turn the ignitionswitch to the ON (II) position again.

The system may not recognize yourkey’s coding if another immobilizerkey or other metal object (i.e. keyfob) is near the ignition switch whenyou insert the key.

The immobilizer system protectsyour vehicle from theft. If animproperly-coded key (or otherdevice) is used, the engine’s fuelsystem is disabled.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.

Immobilizer System

78

－

－

－

－

The ignition switch has fourpositions: LOCK (0), ACCESSORY(I), ON (II), and START (III).

You will hear a reminder beeper ifyou leave the key in the LOCK (0) orthe ACCESSORY (I) position andopen the driver’s door. Remove thekey to turn off the beeper.

The shift lever must be in Parkbefore you can remove the key fromthe ignition switch.

You can insert orremove the key only in this position.To turn the key, the shift lever mustbe in Park, and you must push thekey in slightly.

If the front wheels are turned, theanti-theft lock may make it difficultto turn the key. Firmly turn thesteering wheel to the left or right asyou turn the key.

You canoperate the audio system and theaccessory power sockets in thisposition.

This is the normal keyposition when driving. Several of theindicators on the instrument panelcome on as a test when you turn theignition switch from theACCESSORY (I) to the ON (II)position.

Use this positiononly to start the engine. The switchreturns to the ON (II) position whenyou let go of the key.

Ignition Switch

LOCK (0)

ACCESSORY (I)

ON (II)

START (III)

Instruments

andC

ontrols

79

To lock the doors when getting outof the vehicle, remove the key fromthe ignition switch, and push the topof the master door lock switch, thenclose the door.

With any door open and the key inthe ignition, both master door lockswitches and driver’s door lock tabare disabled. They are not disabledwhen all the doors are closed, orwhen the key is not in the ignition.

To lock any door when getting out ofthe vehicle, pull the lock tab out, andclose the door.

Each front door has a master doorlock switch. Either switch locks andunlocks all doors. Push the top of theswitch to lock all doors; push thebottom to unlock them.

The lock tab on each door locks andunlocks that door. Pulling out on thedriver’s door lock tab locks all doors.To unlock the driver’s door from theoutside, turn the key and release it.If you turn it again, all the doorsunlock.

Each door has a lock tab next to theinside door handle. Pull out the tabto lock the door, and push it in tounlock.

Door Locks

Lockout Prevention

Power Door Locks

80

LOCK TAB

To lock

To unlock

To lock

To unlock

MASTER DOOR LOCK SWITCH

The childproof door locks aredesigned to prevent children seatedin the rear from accidentally openingthe rear doors. Each rear door has alock lever near the edge. With thelever in the LOCK position, the doorcannot be opened from the insideregardless of the position of the locktab. To open the door, push the locktab in, and use the outside doorhandle.

Your vehicle has customizablesettings for the doors toautomatically lock and unlock. Makeall settings before you start driving.

The auto door locking feature hasthree possible settings:

The doors lock when the vehiclespeed reaches 9 mph (15 km/h).

Set the parking brake.

Turn the ignition switch to the ON(II) position.

Make sure the shift lever is inPark (P), and close the driver’sdoor.

The auto door locking isdeactivated all the time.

The doors lock whenever youmove the shift lever out of thePark position.

1.

2.

3.

Locks all doors when the vehicle’s speedreaches about 9 mph (15 km/h).

Childproof Door Locks Auto Door Locking/Unlocking

Auto Door Locking

To activate an auto door lock mode:

Door Locks

Instruments

andC

ontrols

81

LEVERUnlock

Lock



Push and hold the lock side of themaster door lock switch on thedriver’s door. You will hear aclicking sound after about 5seconds.

Release the switch, and turn theignition switch to theACCESSORY (I) position within 5seconds.

Push and hold the brake pedal,then move the shift lever out ofPark (P).

Push and hold the lock side of themaster door lock switch on thedriver’s door. You will hear aclicking sound, and after about 5seconds, you will hear anotherclicking sound.

Make sure the shift lever is inPark (P), and open the driver’sdoor.

Release the switch, turn theignition switch to theACCESSORY (I) position within 5seconds and move the shift leverto Park (P).

5.

4.

6.

1.

2.

3.

4.

5.

Door Locks

To turn off the auto door lockmodes:

82

Push and hold the lock side of themaster door lock switch on thedriver’s door. You will hear aclicking sound, and after about 5seconds, you will hear anotherclicking sound.




The driver’s door unlockswhenever you turn the ignitionswitch to the ACCESSORY (I)position.

The auto door unlocking isdeactivated all the time.

The driver’s door unlocks whenyou move the shift lever to thePark position.

All doors unlock when you movethe shift lever to the Park position.

The auto door unlocking feature hasfive possible settings:

All doors unlock whenever youturn the ignition switch to theACCESSORY (I) position.

3.

4.

1.

2.

Locks all doors when the shift lever ismoved out of Park (P).

Auto Door UnlockingTo activate an auto door lock mode:

Door Locks

Instruments

andC

ontrols

83

－

－



Push and hold the brake pedal,then move the shift lever out ofPark (P).

Push and hold the unlock side ofthe master door lock switch on thedriver’s door. You will hear aclicking sound, and after about 5seconds, you will hear anotherclicking sound.



Make sure the shift lever is inPark (P), and open the driver’sdoor.


Until you hear one click (afterabout 5 seconds) to activate thedriver’s door unlock feature.

Or, until you hear a second click(after about 10 seconds) toactivate the all doors unlockfeature.

Release the switch, turn theignition switch to theACCESSORY (I) position within 5seconds and move the shift leverto Park (P).

1.

2.

3.

4.

5.

6.

1.

2.

3.

Unlocks driver’s door or all doors whenthe ignition switch is out of the ON (II)position.

To activate an auto door unlockmode:

To turn off the auto door lockmodes:

Door Locks

84

－

－






Until you hear one click (afterabout 5 seconds) to activate thedriver’s door unlock feature.

Or, until you hear a second click(after about 10 seconds) toactivate the all doors unlockfeature.


4.

5.

1.

2.

3.

4.

Unlocks driver’s door or all doors whenthe shift lever is moved to Park (P).

To activate an auto door unlockmode:

Door Locks

Instruments

andC

ontrols

85

You can also use the master key toopen the trunk lock.

Parents should decide if theirchildren should be shown how to usethis feature. For more informationabout child safety, see page .

To close the trunk, press down onthe trunk lid.

Keep the trunk lid closed at all timeswhile driving to avoid damaging it,and to prevent exhaust gas fromgetting into the interior. See

, page .Press and hold the trunk releasebutton on the remote transmitter.

To open the trunk, pull the trunkrelease handle on the left side of thedriver’s seat. To protect items in thetrunk when you need to give the keyto someone else, lock the trunkrelease handle with the master key,and give the other person the valetkey.

As a safety feature, your vehicle hasa release lever on the trunk latch sothe trunk can be opened from theinside. To open the trunk, push therelease lever to the left.

52 38U.S. model only

Emergency Trunk Opener

CarbonMonoxide Hazard

Trunk

86

MASTER KEYMASTER KEY

TRUNK RELEASEHANDLE

RELEASE LEVER

PULL

－

－－

－

Press this button once tolock all doors. Some exterior lightswill flash once. When you pushLOCK twice within 5 seconds, youwill hear a horn to verify that thedoors are locked. You cannot lockthe doors if any door is not fullyclosed or the key is in the ignitionswitch.

Press this button onceto unlock the driver’s door. Push ittwice to unlock the other doors.Some exterior lights will flash twiceeach time you press the button. Thisbutton does not work when the keyis in the ignition switch.

The ceiling light (if the ceiling lightswitch is in the door activatedposition) will come on when youpress the UNLOCK button. If you donot open any door, the light stays onfor about 30 seconds, then fades out.If you relock the doors with theremote transmitter before 30seconds have elapsed, the light goesoff immediately.

If you unlock the doors with theremote transmitter, but do not openany of the doors within 30 seconds,the doors automatically relock andthe security system will also set.

Press this button forabout 1 second to attract attention;the horn will sound and the exteriorlights will flash for about 30 seconds.To cancel panic mode, press anyother button on the remotetransmitter, or turn the ignitionswitch to the ON (II) position.

Press thisbutton for about 1 second to openthe trunk. You cannot open the trunkif the key is in the ignition switch.

Avoid dropping or throwing thetransmitter.Protect the transmitter fromextreme temperature.Do not immerse the transmitter inany liquid.If you lose a transmitter, thereplacement needs to bereprogrammed by your dealer.

If you push the LOCK button twicewithin 5 seconds, you will hear ahorn to verify that the securitysystem has set.

On U.S. model

Remote Transmitter

LOCK

UNLOCK PANIC

TRUNK RELEASE

Remote Transmitter Care

Instruments

andC

ontrols

87

UNLOCKBUTTON

LOCKBUTTON

PANICBUTTON

LOCKBUTTON

PANIC BUTTONU.S. model

Canadian model

TRUNKRELEASEBUTTON

UNLOCK BUTTON

To replace the battery:

Remove the screw at the base ofthe transmitter with a smallPhillips-head screwdriver.

Separate the transmitter by pryingits middle seam with yourfingernail.

Inside the transmitter, separatethe inner cover from the keypadby releasing the two tabs on thecover.

Battery type: CR1616

If it takes several pushes on thebutton to lock or unlock the doors,replace the battery as soon aspossible.

1.

2.

3.

Remote Transmitter

Replacing the TransmitterBattery

88

SCREW

BATTERY

U.S. model is shownU.S. model is shown

TAB

－

＋

CONTINUED

To adjust the seat forward orbackward, pull up on the bar underthe seat cushion’s front edge. Movethe seat to the desired position, andrelease the bar. Try to move the seatto make sure it is locked in position.

Remove the old battery from theback of the inner cover, and notethe polarity. Make sure thepolarity of the new battery is thesame ( side facing down), theninsert it into the back of the cover.

An improperly disposed of batterycan hurt the environment.Always confirm local regulationsfor battery disposal.

Install the parts in reverse order.

Make all adjustments before youstart driving.

4.

5.

See pages for important safetyinformation and warnings about how toproperly position seats and seat-backs.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.

1311

Remote Transmitter, Seats

Front Seat Adjustments

Instruments

andC

ontrols

89

To change the seat-back angle of thefront seat, pull up the lever on theoutside of the seat bottom.

Once a seat is adjusted correctly,rock it back and forth to make sure itis locked in position.

The height of your driver’s seat isadjustable. To raise the seat,repeatedly pull up the lever on theoutside of the seat cushion. To lowerthe seat, push the lever downrepeatedly.

Your vehicle is equipped with headrestraints in all seating positions tohelp protect you and yourpassengers from whiplash and otherinjuries.

They are most effective when youadjust them so the back of theoccupant’s head rests against thecenter of the restraint.

See page for important safetyinformation and a warning about how toproperly position the head restraints.

13Driver’s Seat Height Adjustment Head Restraints

Seats

90

The head restraints adjust for height.You need both hands to adjust arestraint. Do not attempt to adjust itwhile driving. To raise it, pull upward.To lower the restraint, push therelease button sideways, and pushthe restraint down.

The lid of the console compartmentcan be used as an armrest by movingit forward and backward. Make surethe armrest is securely latched.

When a passenger is seated in therear center seating position, makesure the center head restraint isadjusted to its highest position.

Make sure your passenger’s handsor fingers are away from the armrestbefore moving it.

Armrest

Seats

Instruments

andC

ontrols

91

Rear Center Position

RELEASE BUTTONRELEASE BUTTON

－

－

If the MAIN switch is OFF, thepassenger windows cannot be raisedor lowered. Keep the MAIN switchoff when you have children in thevehicle so they do not injurethemselves by operating thewindows unintentionally.

To open or close thedriver’s window, push or pull thewindow switch firmly down or up tothe second detent, and release it.The window will automatically godown or up all the way. To stop thewindow, pull or push the windowswitch briefly.

If the driver’swindow senses any obstacle while itis closing automatically, it willreverse direction, and then stop. Toclose the window, remove theobstacle, then use the window switchagain.

Auto reverse stops sensing when thewindow is almost closed. You shouldalways check that all passengers andobjects are away from the windowbefore closing it.

Turn the ignition switch to the ON(II) position to raise or lower anywindow. To open the window, pushthe switch down and hold it. Releasethe switch when you want to stop thewindow. To close the window, pullback on the switch and hold it.

The windows operate for up to 10minutes after you turn off theignition switch. Opening either frontdoor cancels this function.

AUTO

AUTO REVERSE

Power Windows

92

DRIVER’S WINDOW SWITCH

MAIN SWITCH

Closing a power window onsomeone’s hands or fingers cancause serious injury.

Make sure your passengers areaway from the windows beforeclosing them.

Keep the inside and outside mirrorsclean and adjusted for best visibility.Be sure to adjust the mirrors beforeyou start driving.

The inside mirror has day and nightpositions. The night position reducesglare from headlights behind you.Flip the tab on the bottom edge ofthe mirror to select the day or nightposition.


Move the selector switch to L(driver’s side) or R (passenger’sside).

Push the appropriate edge of theadjustment switch to move themirror right, left, up, or down.

When you finish, move theselector switch to the center (off)position. This turns theadjustment switch off to keep yoursettings.

1.

2.

3.

4.

Mirrors

Adjusting the Power Mirrors

Instruments

andC

ontrols

93

SELECTOR SWITCH

TAB

ADJUSTMENT SWITCH

On Canadian modelsThe outside mirrors are heated toremove fog and frost. With theignition switch in the ON (II)position, turn on the heaters bypressing the button. The indicator inthe button comes on as a reminder.Press the button again to turn theheaters off. Pressing this button alsoturns the rear window defogger onand off.

To apply the parking brake, pull thelever up fully. To release it, pull upslightly, push the button, and lowerthe lever. The parking brakeindicator on the instrument panelshould go out when the parkingbrake is fully released (see page ).58

Mirrors, Parking Brake

Heated Mirrors Parking Brake

94

HEATED MIRROR BUTTON PARKING BRAKE LEVER

Driving the vehicle with the parkingbrake applied can damage the rearbrakes and axles. A beeper will soundif the vehicle is driven with the parkingbrake on.

Interior Convenience Items

Instruments

andC

ontrols

95

COIN BOX CENTER POCKET

GLOVE BOX

BEVERAGE HOLDERS

VANITY MIRROR

ACCESSORY POWER SOCKET

CONSOLE COMPARTMENT

COAT HOOK

Be careful when you are using thebeverage holders. A spilled liquidthat is very hot can scald you or yourpassengers. Spilled liquids candamage the upholstery, carpeting,and electrical components in theinterior.

To open the console compartment,pull up on the lever, and lift the lid.

To close, lower the lid, and push itdown until it latches.

Open the front beverage holder bysliding its cover backward.

Another accessory power socket is inthe center console compartment.When more than one socket is beingused, the combined power rating ofthe accessories should be 120 wattsor less (10 amps).

Open the glove box by pulling thehandle to the left. Close it with a firmpush.

This socket is intended to supplypower for 12 volt DC accessoriesthat are rated 120 watts or less (10amps). It will not power anautomotive type cigarette lighterelement.

To use an accessory power socket,the ignition switch must be in theACCESSORY (I) or ON (II) position.

Beverage Holders Console Compartment

Glove Box

Accessory Power Socket

Interior Convenience Items

96

LEVER

CONSOLE COMPARTMENT

ACCESSORYPOWER SOCKET

An open glove box can causeserious injury to your passengerin a crash, even if thepassenger is wearing the seatbelt.

Always keep the glove boxclosed while driving.

Open any door.Unlock the doors with the key orremote transmitter.Remove the key from the ignition.

The front ceiling light has twospotlights. Push the spotlight lensesto turn them on and off.

The ceiling light has a three-positionswitch; ON, Door Activated, andOFF. In the Door Activated (center)position, the light comes on whenyou:

If you do not open either door afteryou unlock the driver’s door orremove the key from the ignitionswitch, the light fades out in about30 seconds.

If you leave either door open withoutthe key is in the ignition switch, theceiling light will go off after 3minutes.

After all doors are closed tightly, thelight dims slightly, then fades out inabout 30 seconds.

Ceiling Light Spotlights

Interior Lights

Instruments

andC

ontrols

97

DOOR ACTIVATED

ON

OFF

The standard audio system hasmany features. This sectiondescribes those features and how touse them. (If you have an optionalaudio system, refer to the operatinginstructions that came with it.)

The heating and air conditioningsystem in your vehicle provides acomfortable driving environment inall weather conditions.

Your vehicle has an anti-theft audiosystem that requires a code numberto enable it.

The security system helps to dis-courage vandalism and theft of yourvehicle.

.............................Climate Control . 100................................Audio System . 106

..........................Playing the Radio . 109................................Playing a Disc . 112

.......Disc Player Error Messages . 118..........................Setting the Clock . 119

Playing the Radio (Vehicles with..................Navigation System) . 121

Playing a Disc (Vehicles with..................Navigation System) . 125

Playing a PC Card (Vehicles with..................Navigation System) . 129

Disc Player Error Messages(Vehicles with Navigation

..................................System) . 138............................Radio Reception . 139

..................Protecting Your Discs . 141.................Radio Theft Protection . 142................Remote Audio Controls . 143

............................Security System . 144...............................Cruise Control . 145

Features

Features

99

Climate Control

100

REAR WINDOW DEFOGGER BUTTON

FAN CONTROL DIALTEMPERATURE CONTROLDIAL

AUTO BUTTON

MODE CONTROL BUTTON

AIR CONDITIONING BUTTON

FRESH AIR BUTTON

RECIRCULATION BUTTON

WINDSHIELD DEFROST BUTTON

OFF BUTTON

Only on models equipped withNavigation SystemThe climate control system for yourvehicle can also be operated usingthe voice control system. See theNavigation section in your QuickStart Guide for an overview of thissystem and the Navigation Systemmanual for complete details.

The automatic climate controlsystem adjusts the fan speed andairflow levels to maintain the interiortemperature you select.

You can manually select variousfunctions of the climate controlsystem when it is in full automaticmode. All other features remainautomatically controlled.

Making any manual selection causesthe word AUTO in the display to goout.

Turn this dial to increase or decreasethe fan speed and airflow.

Turning this dial clockwise increasesthe temperature of the airflow.

Set the desired temperature byturning the temperature controldial. You will see AUTO in thesystem’s display.

Press the AUTO button.

The system automatically selects theproper mix of conditioned and/orheated air that will, as quickly aspossible, raise or lower the interiortemperature to your preference.

When you set the temperature to itslower limit ( ) or its upper limit( ), the system runs at fullcooling or heating only. It does notregulate the interior temperature.

In cold weather, the fan will notcome on automatically until theheater starts to develop warm air.

In ‘‘AUTO’’ mode, the air conditionermay not work if the humidity insidethe vehicle is low. To activate the airconditioner, press A/C button.

Voice Control System Semi-automatic Operation

Using Automatic Climate Control Fan Control Dial

Temperature Control Dial

Climate Control

Features

101

Airflow is divided betweenthe floor vents and defroster vents atthe base of the windshield.

Air flows from the defrostervents at the base of the windshield.

When you select , the systemautomatically switches to fresh airmode and turns on the A/C.

In AUTO mode, the system controlsthe airflow direction automaticallybetween the dashboard vents andthe floor vents.

This button turns the airconditioning on and off. Theindicator in the button is on whenthe A/C is on.

When the recirculation indicator ison, air from the vehicle’s interior issent throughout the system again.To select recirculation mode whendriving through dusty or smokyconditions, then return to fresh airmode.

The outside air intakes for theheating and cooling system are atthe base of the windshield. Keep thisarea clear of leaves and other debris.

When the flesh air indicator is on, airis brought in from the outside of thevehicle.

The system should be left in freshair mode under almost all conditions.Keeping the system in recirculationmode, particularly with the A/C off,can cause the windows to fog up.

Use the mode control buttons toselect the vents air flows from. Someair will flow from the dashboardcorner vents in all modes.

Air flows from the centerand corner vents in the dashboard.

Airflow is divided betweenthe vents in the dashboard and thefloor vents.

Air flows from the floorvents. When you select , thesystem automatically switches tofresh air mode.

Air Conditioning (A/C) Button

Recirculation Button

Fresh Air Button

Mode Control Button

Climate Control

102

The flow-through ventilation systemdraws in outside air, circulates itthrough the interior, then exhausts itthrough vents near the rear sidepanels.

Set the temperature to the lowerlimit.Make sure the A/C is off.Select and fresh air mode.Set the fan to the desired speed.

The heater uses engine coolant towarm the air. If the engine is cold, itwill be several minutes before youfeel warm air coming from thesystem.

Air conditioning places an extra loadon the engine. Watch the enginecoolant temperature gauge (see page

). If it moves near the red zone,turn off the A/C until the gaugereading returns to normal.

Turn on the A/C by pressing thebutton. The indicator in the buttoncomes on when a fan speed isselected.Make sure the temperature is setto maximum cool.Select .If the outside air is humid, selectrecirculation mode. If the outsideair is dry, select fresh air mode.Set the fan to the desired speed.

you cancool it down more rapidly by partiallyopening the windows, turning on theA/C, and setting the fan tomaximum speed in fresh air mode.

Air conditioning, as it cools, removesmoisture from the air. When used incombination with the heater, itmakes the interior warm and dry andcan prevent the windows fromfogging up.

Select .When you select , the systemautomatically switches to the freshair mode.Set the fan to the desired speed.Adjust the warmth of the air withthe temperature control dial.

This setting is suitable for all drivingconditions whenever the outsidetemperature is above 32°F (0°C).

Turn the fan on.Turn on the air conditioning.Select and fresh air mode.Adjust the temperature to yourpreference.

1.2.3.4.

1.

2.

3.4.

5.1.

2.3.

65

1.

2.3.4.

If the interior is very warm,

Climate Control

Ventilation

Using the Heater

Using the A/C Dehumidify the Interior

Features

103

To clear the windows faster, you canclose the dashboard corner vents byrotating the wheel below each vent.This sends more warm air to thewindshield defroster vents. Once thewindshield is clear, select fresh airmode to avoid fogging the windows.

For your safety, make sure you havea clear view through all the windowsbefore driving.

Select . When you select, the system automatically

switches to fresh air mode andturns on the A/C. The A/Cindicator will not come on, if it waspreviously off.Select .Set the fan and temperaturecontrols to maximum level.

Set the fan to the desired speed, orhigh for faster defrosting.Select . When you select

, the system automaticallyswitches to fresh air mode andturns on the A/C. The A/Cindicator will not come on, if it waspreviously off.Adjust the temperature so theairflow feels warm.Select to help clear therear window.To increase airflow to thewindshield, close the corner vents.

To remove fog from the inside of thewindows:

1.

2.

3.

4.

5.

1.

2.3.

Climate Control

To Defog and Defrost To Remove Exterior Frost or IceFrom the Windows

104

Press the OFF button. However, alack of airflow can cause thewindows to fog up. You should keepthe fan on at all times so stale air andmoisture do not build up in theinterior and cause fogging.

To regulate the interior temperatureand humidity, the climate controlsystem has two sensors. A sunlightsensor is located in the top of thedashboard and a temperature/humidity sensor is next to thesteering column. Do not cover thesensors or, spill liquid or spraychemical cleaners on the sensors.

To Turn Everything Off Sunlight, Temperature, andHumidity Sensors

Climate Control

Features

105

TEMPERATURE/HUMIDITY SENSORSUNLIGHT SENSOR

Read the appropriate pages in thissection for operation of the audiosystems installed in your vehicle.

page to for A and B typepage to for C type

If your vehicle has a different audiosystem, refer to its manual foroperating instructions.

108121

120138

Audio System

(A type)

106

Canadian model

Audio System

(B type) (C type)

Features

107

U.S. model without navigation system U.S. model with navigation system

Playing the Radio

(A type) (B type)

108

AM/FM BUTTONAMBUTTON

SCANBUTTON

Canadian model U.S. model without navigation system

SCANBUTTON

FMBUTTON AUTO SELECT BUTTON

PWR/VOL KNOB

PRESET BARS

SEEK BAR

AUTO SELECT BUTTON

TUNE/SOUND KNOB

SEEK BAR

PRESET BARS

PWR/VOL KNOB

TUNE/SOUND KNOB

－－

－

－

－

－

CONTINUED

The ignition switch must be in theACCESSORY (I) or ON (II) position.Turn the system on by pushing thePWR/VOL knob. Adjust the volumeby turning the same knob.

The band and frequency that theradio was last tuned to is displayed.To change bands, press the AM/FMbutton (AM or FM button). On theFM band, ST will be displayed if thestation is broadcasting in stereo.Stereo reproduction in AM is notavailable.

If you do nothing, the system willthen scan for the next strong stationand play it for 10 seconds. When itplays a station you want to listen to,press the SCAN button again.

Each side of the bars(1 6) can store one station on AM,and two stations on FM.

Use the TUNE knob totune the radio to a desired frequency.Turn the knob right to tune to ahigher frequency, or left to tune to alower frequency.

The seek functionsearches up and down from thecurrent frequency to find a stationwith a strong signal. To activate it,press the or side of theSEEK bar, then release it.

The scan function samplesall stations with strong signals on theselected band. To activate it, pressthe SCAN button, then release it.You will see SCAN in the display.The system will scan for a stationwith a strong signal. When it findsone, it will stop and play that stationfor about 10 seconds. Repeat steps 1 through 3 to store a

total of six stations on AM andtwelve stations on FM.

Pick a preset number (1 6), andhold it until you hear a beep.

Use the tune, seek, or scanfunction to tune the radio to adesired station.

Select the desired band, AM orFM. FM1 and FM2 let you storetwelve stations.

You can use any of five methods tofind radio stations on the selectedband: TUNE, SEEK, SCAN, thepreset bars, and AUTO SELECT.

1.

2.

3.

4.

Playing the Radio

To Play the Radio

To Select a Station

PRESET

TUNE

SEEK

SCAN

Features

109

－ You will see a ‘‘0’’ displayed afterpressing a preset bar if auto selectcannot find a strong station for everypreset bar.

If you do not like the stations autoselect has stored, you can storeother frequencies on the preset barsas previously described.

, press theA. SEL (auto select) button. Thisrestores the presets you originallyset.

Press the SOUND (TUNE) knobrepeatedly to display the bass (BAS),treble (TRE), fader (FAD), balance(BAL), and speed-sensitive volumecompensation (SVC) settings.

Each mode is shown in the display asit changes. Turn the SOUND(TUNE) knob to adjust the setting toyour liking. When the level reachesthe center, you will see ‘‘ ’’ inthe display. The system willautomatically return the display tothe selected audio mode about 5seconds after you stop adjusting amode.

If you aretraveling far from home and can nolonger receive your preset stations,you can use the auto select feature tofind stations in the local area.

Press the A. SEL button. ‘‘A.SEL’’flashes in the display, and the systemgoes into scan mode for severalseconds. It stores the frequencies ofsix AM, and twelve FM stations inthe preset bars.

To turn off auto select

Playing the Radio

Adjusting the SoundAUTO SELECT

110

－

－－

These twomodes adjust the strength of thesound coming from each speaker.BALANCE adjusts the side-to-sidestrength, while FADER adjusts thefront-to-back strength.

You can use the instrument panelbrightness control buttons to adjustthe illumination of the audio system(see page ). The audio systemilluminates when the parking lightsare on, even if the radio is off.

The SVCmode controls the volume based onvehicle speed. The faster you go, thelouder the audio volume becomes.As you slow down, the audio volumedecreases.

The SVC has four modes; SVC OFF,SVC LOW, SVC MID, and SVCHIGH. The default setting is MID.Turn the SOUND (TUNE) knob toadjust the setting to your liking.If you feel the sound is too loud,choose low. If you feel the sound istoo quiet, choose high.

Use the TREBLE/BASS modes to adjust the tone toyour liking.

74

Playing the Radio

Balance/Fader

Audio System LightingSpeed-sensitive volumecompensation (SVC)

Treble/Bass

Features

111

Playing a Disc

(A type) (B type)

112

SCANBUTTON

SCANBUTTON

FOLDER KNOB

SEEK/SKIP BAR

PWR/VOL KNOB

REPEATBUTTON

LOADINDICATOR

EJECTBUTTON

REPEATBUTTON


RANDOMBUTTON

CDBUTTON

DISPLAYBUTTON

PWR/VOL KNOB FOLDER KNOB

EJECTBUTTON

LOADINDICATOR

CDBUTTON

RANDOMBUTTON

DISPLAYBUTTON

SEEK/SKIP BAR

To load or play discs, the ignitionswitch must be in the ACCESSORY(I) or ON (II) position.

You operate the CD player with thesame controls used for the radio. Toselect the CD player, press the CDbutton. You will see ‘‘CD’’ in thedisplay. The number of the trackplaying is shown in the display. Thesystem will continuously play a discuntil you change modes.

The specifications of the compatibleMP3 file are:Sampling frequency: 32/44.1/48 kHz(MPEG1), 24, 22.05, 16 kHz(MPEG2)Bit rate: 32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbps(MPEG1), 8/16/24/32/40/48/56/64/80/96/112/128/160 kbps(MPEG2)Compatible with variable bit rate andmulti-session.Maximum layers(including ROOT): 8 layers

Sampling frequency: 32/44.1/48 kHzBit rate: 48/64/80/96/128/160/192kbpsCompatible with variable bit rate andmulti-session.Maximum layers (including ROOT):8 layers

The specifications of the compatibleWMA file are:

Insert the disc about halfway into thedisc slot. The drive will pull the discin the rest of the way and begin toplay it. When the system reaches theend of the disc, it will return to thebeginning and play the disc again.

You can also play 3-inch (8-cm) discswithout using an adapter ring.

To play the radio when a disc isplaying, press the AM/FM button(AM or FM button). Press the CDbutton again to switch back to theCD player.The disc player can also play CD-Rs

and CD-RWs compressed in CD-TEXT, MP3, and WMA formats.When playing a disc in MP3 or WMA,you will see ‘‘MP3’’ or ‘‘WMA’’ in thedisplay. You can select up to 255folders or tracks.

Video CDs and DVDs will not workin this unit.

CONTINUED

To Play a Disc

Playing a Disc

Features

113

Do not use discs with adhesive labels.The label can curl up and cause thedisc to jam in the unit.

You can use the SEEK/SKIP barwhile a disc is playing to selectpassages and change tracks (files inMP3/WMA mode).

In MP3/WMA mode, use theFOLDER (TUNE) knob to selectfolders in the disc, and use theSEEK/SKIP bar to change files.

Each time you press the DISP buttonwhile playing a CD-TEXT, thedisplay mode changes from albumname, to artist name, to track name,and then to normal display. Whenplaying a disc in MP3/WMA, thedisplay mode changes from foldername, to file name, to artist tag, toalbum tag, to track tag, and then tonormal display.

If the title is too long, it will not showall at once. Press and hold the DISPbutton, and the rest of the title willshow in the display.

You will also see the album and trackname (CD-TEXT), or the folder andfile name (MP3/WMA) under theseconditions:

When you insert a disc, and thesystem begins to play.

Each time a new track, file, orfolder plays, other than in normaldisplay mode.

Playing a Disc

To Change or Select Tracks/FilesName Display Function

114

－－

－In MP3/WMA mode

Toselect a different folder, turn theFOLDER (TUNE) knob clockwise tomove to the beginning of the nextfolder. Turn the knobcounterclockwise to move to thebeginning of the current folder. Turnit counterclockwise again to skip tothe beginning of the previous folder.

Each time youpress and release the side, theplayer skips forward to thebeginning of the next track (files inMP3/WMA mode). Press andrelease the side to skipbackward to the beginning of thecurrent track. Press it again to skipto the beginning of the previoustrack.

To move rapidly within a track, pressand hold the or side of theSEEK/SKIP bar.

To continuously replaya track (file in MP3/WMA mode),press and release the RPT button.You will see RPT in the display.Press and hold the RPT button toturn it off.

CONTINUED

Playing a Disc

FOLDER SELECTIONSEEK/SKIP REPEAT (TRACK/FILE

REPEAT)

Features

115

－－－In MP3/WMA mode In MP3/WMA mode

This feature,when activated, replays all the fileson the selected folder in the orderthey are compressed in MP3/WMA.To activate folder repeat mode, pressthe RPT button repeatedly until yousee F-RPT in the display. The systemcontinuously replays the currentfolder. Press and hold the RPTbutton to turn it off.

Each time you press and release theRPT button, the mode changes fromfile repeat to folder repeat, then tonormal playing.

This feature plays the trackwithin a disc in random order. InMP3/WMA mode, this feature onlyplays folders within a disc in randomorder. Files in the folder are playedin recorded order. To activaterandom play, press and release theRDM button. In MP3/WMA mode,press the RDM button twice to selectwithin a disc random play. You willsee RDM in the display. Press andrelease the RDM button again toreturn to normal play.

Thisfeature, when activated, plays thefiles in the current folder in randomorder, rather than in the order theyare compressed in MP3/WMA. Toactivate folder random play, pressthe RDM button. You will seeF-RDM in the display. The systemwill then select and play filesrandomly. This continues until youdeactivate folder random play bypressing and holding the RDMbutton.

Each time you press and release theRDM button, the mode changesfrom folder random play, to within adisc random play, then to normalplay.

Playing a Disc

FOLDER-REPEATRANDOM (Random within aDisc) FOLDER-RANDOM

116

－－

In MP3/WMA modePress the eject button ( ) toremove the CD. If you eject the CD,but do not remove it from the slot,the system will automatically reloadthe CD after 10 seconds and put it inpause mode. To begin playing, pressthe CD button.

Press the AM/FM button (AM orFM button) to switch to the radiowhile a CD is playing. Press the CDbutton to play the CD.

If you turn the system off while adisc is playing, either with the PWR/VOL knob or by turning off theignition switch, the disc will stay inthe drive. When you turn the systemback on, the disc will begin playingwhere it left off.

For information on how to handleand protect compact discs, see page

.

The scan function samplesall the tracks/files on the disc in theorder they are recorded on the disc.To activate the scan feature, pressthe SCAN button. You will see SCANin the display. You will get a 10second sampling of each track on thedisc. You will also see a track/filename in the display. Press and holdthe SCAN button to get out of thesystem and play the last tracksampled.

This feature, whenactivated, samples the first file ofeach folder for 10 seconds. Toactivate the folder scan feature,press the SCAN button until you seeF-SCAN in the display. The foldername is also displayed. To hear therest of the folder, press the SCANbutton, within 10 seconds. If you donot, the system advances to the nextfolder, plays 10 seconds of it, andcontinues throughout the rest of thefolder the same way. When thesystem samples the first file of allfolders, F-SCAN is cancelled, and thesystem plays normally.

141

Playing a Disc

To Stop Playing a DiscSCAN

Protecting Discs

F-SCAN

Features

117

Indication SolutionCauseThe chart on the right explains theerror messages you may see in thedisplay while playing a disc.

If you see an error message in thedisplay while playing a disc, pressthe eject button. After ejecting thedisc, check it for damage ordeformation. If there is no damage,insert the disc again.

If there is still a problem, the errormessage will reappear. Press theeject button, and pull out the disc.

Insert a different disc. If the newdisc plays, there is a problem withthe first disc. If the error messagecycle repeats and you cannot clear it,take your vehicle to a dealer.

Press the EJECT button, and pull out the disc.Check if it is inserted correctly in the discplayer.Make sure the disc is not scratched or damaged.Press the EJECT button, and pull out the disc.Check the disc for damage or deformation.If the disc cannot be pulled out, or the errormessage does not disappear after the disc isejected, see your dealer.Will disappear when the temperature returns tonormal.

FOCUS Error

Mechanical Error

High temperature

Disc Player Error Messages

118

CONTINUED

Setting the Clock

(A type) (B type)

Features

119

H BUTTON R BUTTON

CLOCK BUTTON

H BUTTON


CLOCK BUTTON

M BUTTON

R BUTTON

M BUTTON

You can quickly set the time to thenearest hour. If the displayed time isbefore the half hour, pressing theCLOCK button until you hear a beep,then pressing the R (preset 3) buttonsets the clock back to the previoushour. If the displayed time is afterthe half hour, the clock sets forwardto the beginning of the next hour.

To set the time, press the CLOCK(AM/FM or AM) button until youhear a beep, then release the button.The displayed time begins to blink.

Change the hour by pressing the H(preset 1) button until the numbersadvance to the desired time. Changethe minute by pressing the M(preset 2) button until the numbersadvance to the desired time.

Press the CLOCK button again toenter the set time.

Setting the Clock

120

Playing the Radio (Vehicles with Navigation System)

Features

(C type)

121

AM/FM BUTTON

AUDIO BUTTON

SCAN BUTTONBACKGROUND ICON

SOUND ICON

PRESET BUTTONS

AUTO SELECTICON

with navigation system

FM1 ICON FM2 ICON AM ICON

TUNE BAR

JOYSTICK

－

－

▲▼

▲ ▼

－

▲ ▼

The scan function samplesall stations with strong signals on theselected band. To activate it, pressthe SCAN button, then release it.You will see SCAN in the display.The system will scan for a stationwith a strong signal. When it findsone, it will stop and play that stationfor about 10 seconds.If you do nothing, the system willscan for the next strong station andplay it for 10 seconds. When it playsa station that you want to listen to,press the SCAN button again.

In addition to the standard audiocontrols, the audio system in yourvehicle can be operated using thevoice control system. See the Navisection in your Quick Start Guide foran overview of this system, and thenavigation system manual forcomplete details.

The ignition switch must be in theACCESSORY (I) or ON (II) position.Turn the system on by pushing thePWR/VOL knob. Adjust the volumeby turning the same knob.

Push the AUDIO button to show theaudio system screen. You can alsooperate the audio system withoutshowing the audio system screen byusing the standard controls. Thestatus bar is shown at the bottom ofthe screen each time you press abutton.

The band and frequency that theradio was last tuned to is displayed.To change bands, press the AM/FMbutton, or touch the desired bandicon (FM1, FM2, or AM). On the FMband, STEREO will be displayed ifthe station is broadcasting in stereo.Stereo reproduction on AM is notavailable.

You can use any of five methods tofind radio stations on the selectedband: thepreset buttons, and .

Use the TUNE bar to tunethe radio to a desired frequency.Press the bar to tune to a higherfrequency, and the bar to tune toa lower frequency. When you pressand hold the or bar, the systembeeps twice, and the frequency goesup or down until you release the bar.

The SEEK functionsearches up and down from thecurrent frequency to find a stationwith a strong signal. To activate it,press and hold or on the TUNEbar until you hear a beep, thenrelease the bar.


Voice Control System

SCAN

To Play the Radio

TUNE, SEEK, SCAN,AUTO SELECT

To Select a Station

TUNE

SEEK

122

－－

Select the desired band, AM orFM. FM1 and FM2 let you storetwo frequencies with each presetbutton.

Use the tune, seek, or scanfunction to tune the radio to adesired station.

Repeat steps 1 through 3 to store atotal of six stations on AM andtwelve stations on FM.

Each preset button canstore one frequency on AM and twofrequencies on FM.

If you aretraveling far from home and can nolonger receive your preset stations,you can use the auto select feature tofind stations in the local area.

Press the AUTO SEL icon. ‘‘AUTOSEL’’ flashes in the display, and thesystem goes into scan mode forseveral seconds. It stores thefrequencies of six AM, and twelveFM stations in the preset buttons.

If you do not like the stations autoselect has stored, you can storeother frequencies on the presetbuttons. Use the TUNE, SEEK, orSCAN functions to find stations, thenstore them in the preset buttons asdescribed.

press theAUTO SEL icon. This restores thepresets you originally set.

You will see a ‘‘0’’ displayed afterpressing a preset button if autoselect cannot find a strong station forevery preset button.

There are three modes of display:level (the audio level appears as tenvertical bar graphs), spectrumanalysis (the audio level appears asripples of water), and off (a plainbackground is displayed). Each timeyou touch the Background icon, themode changes.

Pick a preset button, and hold ituntil you hear a beep.

1.

2.

3.

4.

To turn off Auto Select,

CONTINUED

Preset AUTO SELECT

To Change the Background Image


Features

123

－＋－

－

－

To adjust the sound, push theAUDIO button, then enter the soundgrid by touching the SOUND icon onthe display.

You can use the instrument panelbrightness control buttons to adjustthe illumination of the audio system(see page ). The audio systemilluminates when the parking lightsare on, even if the radio is off.

To adjust the trebleand bass, touch or on each sideof the treble or bass adjustment bar,or move the joystick. The adjustmentbar shows you the current setting.

These modes adjustthe strength of the sound comingfrom each speaker. Left/Rightbalance adjusts the side-to-sidestrength, while Front/Rear faderadjusts the front-to-back strength.To adjust the left/right balance,touch the ‘‘L’’ or ‘‘R’’ icon, or movethe joystick. To adjust the front/rearfader, touch the ‘‘FR’’ or ‘‘RR’’ icon,or move the joystick.

The SVCmode controls the volume based onvehicle speed. The faster you go, thelouder the audio volume becomes.As you slow down, the audio volumedecreases.

The default setting is Mid. If you feelthe sound is too loud, choose low. Ifyou feel the sound is too quiet,choose Hi.

To see the audio display when youare finished adjusting the sound,wait 5 seconds.

74

Adjusting the Sound


Audio System Lighting

Treble/Bass

Left/Right Balance and Front/Rear Fader

Speed-sensitive volumecompensation (SVC)

124

SOUND ICON

－

＋

Playing a Disc (Vehicles with Navigation System)

Features

(C type)

125

OPEN BUTTON

CD BUTTON

AUDIO BUTTON

SCAN BUTTON

SKIP BUTTON

SKIP BUTTONRANDOMBUTTON

with navigation system CD ICON

REWIND BUTTONREPEAT BUTTON

FAST FORWARDBUTTON

－

With the ignition in theACCESSORY (I) or ON (II) position,press the OPEN button, and insert adisc about halfway into the disc slot.The drive will pull the disc in the restof the way, and the disc will begin toplay. You operate the disc playerwith the same controls used for theradio. The number of the trackplaying is shown in the display. Thesystem will continuously play a discuntil you change modes.

Push the button to play the nexttrack on the disc. Push the

button once to replay the trackin play; press it twice to replay theprevious track. To move rapidlywithin a track, press and hold the

or the button.Push the AUDIO button to show theaudio system screen. You can alsooperate the audio system withoutshowing the audio system screen byusing the standard controls. Thestatus bar is shown at the bottom ofthe screen each time you press abutton.

When you play CD-TEXT, you willsee the track name, artist name, andalbum name on the screen. Whenyou play MP3/WMA discs, you willsee the track name and folder nameon the screen. If the disc was notrecorded with this information, it willnot be displayed.

The player can also play CD-TEXT,MP3, and WMA formats.

Press the RPT buttonto continuously replay a track. Youwill see REPEAT in the display.Press the RPT button again to turn itoff. In MP3/WMA mode, press andhold the RPT button to activatefolder repeat. Folder repeatcontinuously replays the folder.


Disc Player To Change Tracks

REPEAT

126

CLOSE BUTTON

DISC SLOT Avoid using discs with adhesive labels.The label can curl up and cause thedisc to jam in the unit.

－

－

You can also choose a track directlyfrom a track list. Touch TRACKLIST on the screen, and the track listscreen is shown.

If you are playing a CD, the screenshows the track number. If you areplaying a CD-TEXT disc, the trackname is also shown. If you areplaying an MP3 or WMA disc, thefolders will also be shown.

If there are no track names, thetrack numbers are displayed. Youwill see the current track highlighted.Select the desired track. If you arechecking the track list and want togo back to previous screen, touchReturn.

Press the RDMbutton to play the tracks in randomorder. You will see RANDOM in thedisplay. Press the RDM button againto return to normal play. In MP3/WMA mode, press and hold theRDM button to activate folderrandom. Folder random plays thetracks in random order within thecurrent folder.

The SCAN functionsamples all the tracks on the disc inthe order they are recorded. Toactivate it, press and release theSCAN button. You will see SCAN inthe display, and you will get a 10second sampling of each track on thedisc. Press the SCAN button again toget out of scan mode. In MP3/WMAmode, press and hold the SCANbutton to activate folder scan. Folderscan samples the first track of eachfolder.

To Choose a TrackRANDOM

SCAN


Features

127

To take the system out of disc mode,press the AM/FM button or CD/XMbutton (if the XM radio is connected).You can also touch the FM1, FM2,AM, or CARD icon on the screen. Toreturn to disc mode, press the CD/XM button or touch the CD icon.

Press the OPEN button. The screenfolds back, and the disc playerappears. Press the eject button( ) to remove the disc. If youeject the disc, but do not remove itfrom the slot, the system willautomatically reload it after 10seconds and will remain there in apause mode.

To close the screen, press theCLOSE button. The screen will notclose if you have a partially insertedCD or PC card.

The disc player plays MP3/WMAfolders in recorded order. Maximumplayable folder layers are 8, totalplayable folders are 99, and totalplayable tracks are 999 per disc. Ifyour disc has a complex structure,the disc player takes some time toread the disc before playing it.

For information on how to handleand protect discs, see page .141

To Stop Playing a Disc Removing a Disc

Playing an MP3/WMA Disc

Protecting Discs


128

EJECT BUTTON

CLOSE BUTTON

－

＋

Playing a PC Card (Vehicles with Navigation System)

Features

(C type)

129

REPEAT BUTTON

OPEN BUTTON

CD/XM BUTTON

AUDIO BUTTON

SCAN BUTTON

With navigation systemPLAY MODE ICON

TRACK LIST ICON PC CARD ICON

RANDOMBUTTON

REWIND BUTTON

FAST FORWARDBUTTON

SKIP BUTTON

SKIP BUTTON

With the ignition in theACCESSORY (I) or ON (II) position,press the OPEN button, insert a PCcard all the way into the card slot,then press the CLOSE button. ThePC card will begin to play. Youoperate the PC card with the samecontrols used for the radio. Thenumber of the track playing is shownin the display. The system willcontinuously play a card until youchange modes.

Push the AUDIO button to show theaudio system screen. You can alsooperate the audio system withoutshowing the audio system screen byusing the standard controls. Thestatus bar is shown at the bottom ofthe screen each time you press abutton.

You cannot close the display untilthe PC card is inserted all the wayin or removed.

Never insert foreign objects intothe PC card slot.

The PC card player can play MP3and WMA formats.

When you insert a PC card intothe slot, make sure you put it instraight. If you cannot insert it,remove it, and insert again.

Do not keep PC cards in thevehicle. Direct sunlight and highheat will damage them.

To avoid damaging the cardreader, do not insert hard discdrive cards into the PC card slot.

The system may not be able toread some memory cardsdepending on the type of memorycard or combination of PC cardadaptor and memory card.Recommended memory cards areCompactFlash and Flash ATAmemory cards.


PC Card

130

NOTE:CLOSE BUTTON

PC CARD SLOT

CONTINUED


Play Mode

Features

131

FOLDER MODE

ARTIST MODE ALBUM MODE

MODE INDICATOR

PLAY MODE ICON

PLAY MODE ICON

MODE INDICATORMODE INDICATOR

PLAY MODE ICON

There are three modes to choosefrom: folder, artist, and album.Touch the PLAY MODE icon, thenchoose one.

Choose ‘‘Continue playing thecurrent song’’ or ‘‘Play a new tracklist.’’ Continue playing the CurrentSong plays the current song, thengoes into the play mode you chose.Play a new track list plays the playmode you chose.

Push the button to play the nexttrack. Push the button once toreplay the track in play; press it twiceto replay the previous track. Tomove rapidly within a track, pressand hold the or the button.

Folder mode plays tracks in theorder they are recorded in. Artistmode plays tracks in alphabeticalorder by artist and song title. Albummode plays albums in alphabeticalorder. If the ID3 tag information isnot in your card, the play modemight not work properly.

You can always go back to theprevious screen by pressing theCANCEL button. Press the AUDIObutton to exit.


To select a play mode To Change Tracks

132

－

－

－

Press the RPT buttonto continuously replay a track. Youwill see TRACK REPEAT in thedisplay. Press RPT button again toturn it off.

Press and hold the RPT button untilyou hear a beep. Folder, artist, oralbum repeat will be activateddepending on which play mode youchose. Folder repeat continuouslyreplays the folder. Artist repeatcontinuously replays by that artist.Album repeat continuously replaysthe album. Press the RPT buttonagain to turn it off.

Press the RDMbutton to play the tracks in randomorder. You will see TRACKRANDOM in the display. Press theRDM button again to return tonormal play.

Press and hold the RDM button untilyou hear a beep. Folder, artist, oralbum random will be activateddepending on which play mode youchose. Folder random plays thetracks in random order within afolder. Artist random plays the artist’stracks in random order. Albumrandom plays the tracks in randomorder within an album. Press theRDM button again to turn it off.

The SCAN functionsamples all the tracks on the PC cardin the order they are recorded. Toactivate it, press and release theSCAN button. You will see TRACKSCAN in the display, and you will geta 10 second sampling of each trackon the card. Press the SCAN buttonagain to get out of scan mode.

Press and hold the SCAN buttonuntil you hear a beep. Folder, artist,or album scan will be activateddepending on which play mode youchose. You will get a 10 secondsampling of each track. Folder scansamples the first track of each folder.Artist scan samples the first track ofeach artist. Album scan samples thefirst track of each album. To hearthe rest of the folder, the artist, orthe album, press the SCAN button,within 10 seconds. If you do not, thesystem advances to the next folder,artist, or album, plays for 10 secondsof it, and continues throughout therest of folders, artists, or albums thesame way. When the system reachesthe last folder, artist, or album, thescan mode is cancelled, and the PCcard plays normally.


REPEAT

RANDOM

SCAN

Features

133


To Choose a Track

134

TRACK LIST ICON

(Folder Mode)

(Artist Mode)

(Album Mode)

SONG SEARCH ICON

SONG SEARCH ICON

SONG SEARCH ICON

You can also choose a track directlyfrom a track list. Touch TRACKLIST on the screen, and the track listscreen will be shown. The displaychanges depending on which playmode you chose. You will see thecurrent track highlighted. Select thedesired track. If you want to go backto the previous screen, press Return.

If you want to search for a particularsong, select Song Search on thetrack list screen. You can search asong from Title by Keyword, Artist,or Album.

If you choose Title by Keyword,enter the title or any keyword, thenpress List. The system will search tofind the song or songs.

If you cannot find characters, selectMore to show other characters.

CONTINUED


Search by Title by Keyword

Features

135

Folder mode is shownRETURN ICON

MORE ICONSONG SEARCH ICON TITLE BY KEYWORD ICON

ARTIST ICON ALBUM ICON LIST ICON

Then select a song. If you choose Artist, select an artist,then select a song.

If you choose Album, select analbum, then select a song.


Search by Artist Search by Album

136

The player plays recorded MP3/WMA cards in recorded order.Maximum playable folder layers are8, total playable folders are 99, andtotal playable tracks are 999 per card.If your card has a complex structure,the player takes some time to readthe card before playing it.

Press the OPEN button. The screenfolds back, and the player appears.Press the eject button ( ), andremove the card, then press theCLOSE button.

You cannot close the display untilthe PC card is inserted all the way inor removed.

To take the system out of card mode,press the AM/FM button or CD/XMbutton (if a disc is loaded or the XMradio is connected). You can alsotouch the FM1, FM2, AM, or CDicon on the screen. To return to cardmode, press the CD/XM button ortouch the CARD icon.


Playing an MP3/WMA Card Removing a PC CardTo Stop Playing a Card

Features

137

EJECT BUTTON

CLOSE BUTTON

Indication Cause SolutionThe chart on the right explains theerror messages you may see in thedisplay while playing a disc.

If you see an error message in thedisplay while playing a disc, pressthe eject button. After ejecting thedisc, check it for damage ordeformation. If there is no damage,insert the disc again.

If there is still a problem, the errormessage will reappear. Press theeject button, and pull out the disc.

Insert a different disc. If the newdisc plays, there is a problem withthe first disc. If the error messagecycle repeats and you cannot clear it,take your vehicle to a dealer.

FOCUS Error

Mechanical Error

High temperature

Press the EJECT button, and pull out the disc.Check if it is inserted correctly in the discplayer.Make sure the disc is not scratched or damaged.Press the EJECT button, and pull out the disc.Check the disc for damage or deformation.If the disc cannot be pulled out, or the errormessage does not disappear after the disc isejected, see your dealer.Will disappear when the temperature returns tonormal.

Disc Player Error Messages (Vehicles with Navigation System)

138

The radio can receive the completeAM and FM bands.Those bands cover these frequen-cies:

AM band: 530 to 1,710 kHzFM band: 87.7 to 107.9 MHz

How well the radio receives stationsis dependent on many factors, suchas the distance from the station’stransmitter, nearby large objects,and atmospheric conditions.

Driving very near the transmitter ofa station that is broadcasting on afrequency close to the frequency ofthe station you are listening to canalso affect your radio’s reception.You may temporarily hear bothstations, or hear only the station youare close to.

A radio station’s signal gets weakeras you get farther away from itstransmitter. If you are listening to anAM station, you will notice the soundvolume becoming weaker, and thestation drifting in and out. If you arelistening to an FM station, you willsee the stereo indicator flickering offand on as the signal weakens.Eventually, the stereo indicator willgo off and the sound will fadecompletely as you get out of range ofthe station’s signal.

Radio stations on the AM band areassigned frequencies at least 10 kHzapart (530, 540, 550). Stations on theFM band are assigned frequencies atleast 0.2 MHz apart (87.9, 88.1, 88.3).

Stations must use these exactfrequencies. It is fairly common forstations to round-off the frequency intheir advertising, so your radio coulddisplay a frequency of 100.9 eventhough the announcer may identifythe station as ‘‘FM101.’’

CONTINUED

Radio Frequencies Radio Reception

Radio Reception

Features

139

Radio signals, especially on the FMband, are deflected by large objectssuch as buildings and hills. Yourradio then receives both the directsignal from the station’s transmitter,and the deflected signal. This causesthe sound to distort or flutter. This isa main cause of poor radio receptionin city driving.

Radio reception can be affected byatmospheric conditions such asthunderstorms, high humidity, andeven sunspots. You may be able toreceive a distant radio station oneday and not receive it the next daybecause of a change in conditions.

Electrical interference from passingvehicles and stationary sources cancause temporary reception problems.

As required by the FCC:Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

Radio Reception

140

When a disc is not being played,store it in its case to protect it fromdust and other contamination. Toprevent warpage, keep discs out ofdirect sunlight and extreme heat.

To clean a disc, use a clean soft cloth.Wipe across the disc from the centerto the outside edge.

A new disc may be rough on theinner and outer edges. The smallplastic pieces causing this roughnesscan flake off and fall on therecording surface of the disc,causing skipping or other problems.Remove these pieces by rubbing theinner and outer edges with the sideof a pencil or pen.

Handle a disc by its edges; nevertouch either surface. Do not placestabilizer rings or labels on the disc.These, along with contaminationfrom finger prints, liquids, and felt-tip pens, can cause the disc to notplay properly, or possibly jam in thedrive.

When recording a CD-R orCD-RW, the recording must beclosed for it to be used by thesystem.

When using CD-R or CD-RW discs,use only high quality discs labeledfor audio use.

Never try to insert foreign objects inthe disc player.

Handle your discs properly toprevent damage and skipping.

Play only standard round discs.Odd-shaped discs may jam in thedrive or cause other problems.

General Information Protecting Discs

Protecting Your Discs

Features

141

Do not use discs with adhesive labels.The label can curl up and cause thedisc to jam in the unit.

If you lose the card, you must obtainthe code number from a dealer. Todo this, you will need the system’sserial number.

Your vehicle’s audio system willdisable itself if it is disconnectedfrom electrical power for any reason.To make it work again, you mustenter a specific five-digit code(except for model with navigationsystem)/four-digit code (model withnavigation system) in the presetbuttons. Because there are hundredsof number combinations possiblefrom five or four-digits, making thesystem work without knowing theexact code is nearly impossible.

You should have received a card thatlists your audio system’s code andserial numbers. It is best to store thiscard in a safe place at home. Inaddition, you should write the audiosystem’s serial number in this owner’smanual.

If you make a mistake entering thecode, do not start over; complete thefive-digit (except for model withnavigation system)/four-digit (modelwith navigation system) sequence,then enter the correct code. Youhave 10 tries to enter the correctcode. If you are unsuccessful in 10attempts, you must then leave thesystem on for 1 hour before tryingagain.

If your vehicle’s battery isdisconnected or goes dead, or theradio fuse is removed, the audiosystem will disable itself. Use thepreset buttons to enter the five-digitcode (except for model withnavigation system)/four-digit code(model with navigation system). Thecode is on the radio code cardincluded in your owner’s manual kit.When it is entered correctly, theradio will start playing.

Radio Theft Protection

142

＋

－

＋－

＋－

＋－

▲ ▼

The MODE button changes themode. Pressing the buttonrepeatedly selects FM1, FM2, AM, adisc (if a disc is loaded), or a PC card(if a card is loaded).

If you are listening to the radio, usethe CH button to change stations.Each time you press the top ( ) ofthe button, the system goes to thenext preset station on the band youare listening to. Press the bottom( ) to go back to the previousstation. If you press and hold the CHbutton ( ) or ( ) until you hear abeep, the system goes into the seekmode. It finds a station with a strongsignal.

If you are playing a disc, the systemskips to the beginning of the nexttrack each time you press the top( ) of the CH button. Press thebottom ( ) to return to thebeginning of the current track. Pressit again to return to the previous

track. You will see the disc and tracknumbers in the display. If you pressand hold the CH button ( ) or ( )until you hear a beep, you can selecta different folder.

To use the voice control system,refer to the navigation systemmanual.

Three controls for the audio systemare mounted in the steering wheelhub. These let you control basicfunctions without removing yourhand from the wheel.

The VOL button adjusts the volumeup ( ) or down ( ). Press the topor bottom of the button, hold it untilthe desired volume is reached, thenrelease it.

The auxiliary input jack is under theaccessory power socket. The systemwill accept auxiliary input fromstandard audio accessories.

When the appropriate audio unit isconnected to the auxiliary input jack,press the CD/XM or XM/AUXbutton to select the unit.

On models with navigation system

Remote Audio Controls

Auxiliary Input Jack

Features

143

CH BUTTON

VOL BUTTON

MODE BUTTON

With the system set, you can stillopen the trunk with the master keyor the remote transmitter withouttriggering the alarm. The alarm willsound if the trunk lock is forced, orthe trunk is opened with the trunkrelease handle.

The security system will not set ifthe hood, trunk, or any door is notfully closed. If the system will not set,check the door and trunk openindicators on the instrument panel(see page ) to see if the doors andtrunk are fully closed. Since it is notpart of the monitor display, manuallycheck the hood.

To see if the system is setafter you exit the vehicle, press theLOCK button on the remotetransmitter within 5 seconds. If thesystem is set, the horn will beeponce.

The security system helps to protectyour vehicle and valuables from theft.The horn sounds and a combinationof headlights (low beam), parkinglights, side marker lights, andtaillights flash if someone attemptsto break into your vehicle or removethe radio. This alarm continues for 2minutes, then it stops. To reset analarming system before the 2minutes have elapsed, unlock thedriver’s door with the key or theremote transmitter.

The security system automaticallysets 15 seconds after you lock thedoors, hood, and trunk. For thesystem to activate, you must lock thedoors from the outside with the key,driver’s lock tab, door lock switch, orremote transmitter. The securitysystem indicator on the instrumentpanel starts blinking immediately toshow you the system is setting itself.

Once the security system is set,opening any door, the trunk, or thehood without using the key or theremote transmitter will cause it toalarm. It also alarms if the radio isremoved from the dashboard or thewiring is cut.

Do not attempt to alter this systemor add other devices to it.

62

Security System

144

NOTE:

SECURITY SYSTEMINDICATOR

Push the CRUISE button on thesteering wheel. The CRUISEMAIN indicator on the instrumentpanel comes on.

Accelerate to the desired cruisingspeed above 25 mph (40 km/h).

Cruise control may not hold the setspeed when you are going up anddown hills. If your speed increasesgoing down a hill, use the brakes toslow down. This will cancel cruisecontrol. To resume the set speed,press the RES/ACCEL button. Theindicator on the instrument panel willcome back on.

When climbing a steep hill, theautomatic transmission maydownshift to hold the set speed.

Cruise control allows you to maintaina set speed above 25 mph (40 km/h)without keeping your foot on theaccelerator pedal. It should be usedfor cruising on straight, openhighways. It is not recommended forcity driving, winding roads, slipperyroads, heavy rain, or bad weather.

Press and release the SET/DECEL button on the steeringwheel. The CRUISE CONTROLindicator on the instrument panelcomes on to show the system isnow activated.

1.

2.

3.Using the Cruise Control

Cruise Control

Features

145

CANCELBUTTON

CRUISE BUTTON RES/ACCELBUTTON

SET/DECELBUTTONImproper use of the cruise

control can lead to a crash.

Use the cruise control onlywhen traveling on openhighways in good weather.

You can increase the set cruisingspeed in any of these ways:

Press and hold the RES/ACCELbutton. When you reach thedesired cruising speed, release thebutton.

To increase your speed in verysmall amounts, tap the RES/ACCEL button. Each time you dothis, the vehicle will speed upabout 1 mph (1.6 km/h).

Press and hold the SET/DECELbutton. Release the button whenyou reach the desired speed.

To slow down in very smallamounts, tap the SET/DECELbutton. Each time you do this,your vehicle will slow down about1 mph (1.6 km/h).

You can decrease the set cruisingspeed in any of these ways:

Even with the cruise control turnedon, you can still use the acceleratorpedal to speed up for passing. Aftercompleting the pass, take your footoff the accelerator pedal. The vehiclewill return to the set cruising speed.

Push on the accelerator pedal.Accelerate to the desired cruisingspeed, then press the SET/DECEL button.

Resting your foot on the brake pedalcauses cruise control to cancel.

Tap the brake pedal lightly withyour foot. The CRUISECONTROL indicator on theinstrument panel will go out.When the vehicle slows to thedesired speed, press the SET/DECEL button.

Changing the Set Speed

Cruise Control

146

You can cancel cruise control in anyof these ways:

Push the CANCEL button on thesteering wheel.

When you push the CANCEL button,or tap the brake or clutch pedal, thesystem will remember the previouslyset cruising speed. To return to thatspeed, accelerate to above 25 mph(40 km/h) then press and releasethe RES/ACCEL button. TheCRUISE CONTROL indicator comeson. The vehicle will accelerate to thesame cruising speed as before.

Pressing the CRUISE button turnsthe system off and erases theprevious cruising speed.

Push the CRUISE button on thesteering wheel.

Tap the brake pedal.

Canceling Cruise Control Resuming the Set Speed

Cruise Control

Features

147

CRUISE BUTTON

CANCELBUTTON

Before you begin driving yourvehicle, you should know whatgasoline to use and how to check thelevels of important fluids. You alsoneed to know how to properly storeluggage or packages. Theinformation in this section will helpyou. If you plan to add anyaccessories to your vehicle, pleaseread the information in this sectionfirst.

.............................Break-in Period . 150.................Fuel Recommendation . 150

.........Service Station Procedures . 151....................................Refueling . 151

Opening and Closing the.......................................Hood . 152

...................................Oil Check . 153.............Engine Coolant Check . 154

...............................Fuel Economy . 154...Accessories and Modifications . 156

.............................Carrying Cargo . 158

Before Driving

Before

Driving

149

Help assure your vehicle’s futurereliability and performance by payingextra attention to how you driveduring the first 600 miles (1,000 km).During this period:

Avoid full-throttle starts and rapidacceleration.

You should also follow theserecommendations with anoverhauled or exchanged engine, orwhen the brakes are replaced.

Your vehicle is designed to operateon unleaded gasoline with a pumpoctane number of 87 or higher. Useof a lower octane gasoline can causea persistent, heavy metallic rappingnoise that can lead to engine damage.

Do not change the oil until thescheduled maintenance time.

Avoid hard braking for the first200 miles (300 km).

Use of gasoline with these additivesmay adversely affect performance,and cause the malfunction indicatorlamp on your instrument panel tocome on. If this happens, contactyour authorized dealer for service.

Some gasoline today is blended withoxygenates such as ethanol orMTBE. Your vehicle is designed tooperate on oxygenated gasolinecontaining up to 10 % ethanol byvolume and up to 15 % MTBE byvolume. Do not use gasolinecontaining methanol.

If you notice any undesirableoperating symptoms, try anotherservice station or switch to anotherbrand of gasoline.

For further important fuel-relatedinformation, please refer to your

.

We recommended using a qualitygasoline containing detergentadditives that help prevent fuelsystem and engine deposits.

In addition, in order to maintain goodperformance, fuel economy, andemissions control, we stronglyrecommend, in areas where it isavailable, the use of gasoline thatdoes NOT contain manganese-basedfuel additives such as MMT.

Break-in Period Fuel Recommendation

Quick Start Guide

Break-in Period, Fuel Recommendation

150

Park with the driver’s side closestto the gas pump.

To open the fuel fill door, pushdown the lever on the left of thedriver’s seat.

Remove the fuel fill cap slowly.You may hear a hissing sound aspressure inside the tank escapes.The fuel fill cap is attached to thefuel filler with a tether. Insert theattachment on the fuel fill cap intothe slit on the fuel fill door.

Stop filling the tank after the fuelnozzle automatically clicks off. Donot try to ‘‘top off’’ the tank. Leavesome room for the fuel to expandwith temperature changes.

even though the tank is not full,there may be a problem with yourvehicle’s fuel vapor recoverysystem. The system helps keepfuel vapor from going into theatmosphere. Try filling at anotherpump. If this does not fix theproblem, consult your dealer.

1.

2.

3.

4.

CONTINUED

If the fuel nozzle keeps clicking off

Service Station Procedures

Refueling

Before

Driving

151

Push

FUEL FILL CAPATTACHMENT

Gasoline is highly flammableand explosive. You can beburned or seriously injuredwhen handling fuel.

Stop the engine, and keepheat, sparks, and flame away.Handle fuel only outdoors.Wipe up spills immediately.

If the hood latch handle movesstiffly, or if you can open the hoodwithout lifting the handle, themechanism should be cleaned andlubricated.

Put your fingers under the frontedge of the hood near the center.Slide your hand to the left untilyou feel the hood latch handle.Push this handle up to release it.Lift up the hood.

Push the fuel fill door closed untilit latches.

Screw the fuel fill cap back onuntil it clicks at least once. If youdo not properly tighten the cap,the malfunction indicator lampmay come on (see page ). Youwill also see a ‘‘CHECK FUELCAP’’ message on the informationdisplay.

Holding the grip, pull the supportrod out of its clip. Insert the endinto the designated hole in thehood.

Park the vehicle, and set theparking brake. Pull the hoodrelease handle located under thelower left corner of the dashboard.The hood will pop up slightly.

2.

1.

3.

5.

6.

229


Opening and Closing the Hood

152

HOODRELEASEHANDLE

LATCH

Remove the dipstick again, andcheck the level. It should bebetween the upper and lowermarks.

Wait a few minutes after turning theengine off before you check the oil.

Remove the dipstick (orange loop).

To close the hood, lift it up slightly toremove the support rod from thehole. Put the support rod back intoits holding clip. Lower the hood toabout a foot (30 cm) above thefender, then let it drop. Make sure itis securely latched.

If it is near or below the lower mark,see on page .

Wipe off the dipstick with a cleancloth or paper towel.

Insert the dipstick all the way backinto its hole.

2.

3.

1.

4.

189


Oil Check

Adding Engine Oil

Before

Driving

153

DIPSTICK

UPPER MARK

LOWER MARK

SUPPORT ROD

CLIP

GRIP

Drive moderately. Rapidacceleration, abrupt cornering,and hard braking use more fuel.

Look at the coolant level in theradiator reserve tank. Make sure it isbetween the MAX and MIN lines. Ifit is below the MIN line, see

on page forinformation on adding the propercoolant.

Refer toon page for information

about checking other items on yourvehicle.

Always maintain your vehicleaccording to the maintenancemessages displayed in theinformation display. See

on page.

The build-up of snow or mud onyour vehicle’s underside addsweight and rolling resistance.Frequent cleaning helps your fuelmileage and reduces the chance ofcorrosion.

Engine oil also affects fueleconomy. The fuel efficient, low-viscosity 0W-20 oil recommendedfor your Civic Hybrid isformulated to help the engine useless fuel. This oil is available atyour dealer.

an underinflated tirecauses more ‘‘rolling resistance,’’which uses more fuel.

You may find that your Civic Hybrid’sunique combination of an engine andan electric motor has drivingcharacteristics that are somewhatdifferent from what you are used to.

184

184

192

For example,

Service Station Procedures, Fuel Economy

Improving Fuel EconomyEngine Coolant Check

AddingEngine Coolant

Owner’s MaintenanceChecks

Owner’sMaintenance Checks

154

MAX

MIN

RESERVE TANK

You may notice that using the A/Ccauses a greater drop in fueleconomy than you are used to inother vehicles. Although the amountof extra fuel used by the A/C load onthe engine is no greater than othervehicles, it is more noticeablebecause of your Civic Hybrid’sexcellent fuel mileage. Using theA/C in hot weather may result infuel economy that is lower thanexpected.

The air conditioning puts an extraload on the engine which makes ituse more fuel. Use the fresh-airventilation when possible.

Try to maintain a constant speed.Every time you slow down andspeed up, your vehicle uses extrafuel. Use cruise control whenappropriate.

Wind resistance causes vehicles touse more fuel at higher speeds.Driving at moderate speeds on thehighway also reduces windresistance and conserves fuel.

The current fuel mileage displayallows you to monitor your fuelmileage and adjust your drivinghabits to save fuel.

Combine several short trips intoone.

Fuel Economy

Before

Driving

155

Your dealer has Honda accessoriesthat allow you to personalize yourvehicle. These accessories havebeen designed and approved for yourvehicle, and are covered by warranty.

When properly installed, cellularphones, alarms, two-way radios, andlow-powered audio systems shouldnot interfere with your vehicle’scomputer controlled systems, suchas your airbags and anti-lock brakes.

Before installing any accessory:Make sure the accessory does notobscure any lights, or interferewith proper vehicle operation orperformance.

Modifying your vehicle, or installingsome non-Honda accessories, canmake it unsafe. Before you make anymodifications or add any accessories,be sure to read the followinginformation.

Although non-Honda accessoriesmay fit on your vehicle, they may notmeet factory specifications, andcould adversely affect your vehicle’shandling and stability.

Be sure electronic accessories donot overload electrical circuits(see page ) or interfere withthe proper operation of yourvehicle.

Do not install accessories on theside pillars or across the rearwindows. In these areas,accessories may interfere withproper operation of the sidecurtain airbags.

Before installing any electronicaccessory, have the installercontact your dealer for assistance.If possible, have your dealerinspect the final installation.

231Accessories

Accessories and Modifications

156

Improper accessories ormodifications can affect yourvehicle’s handling, stability, andperformance, and cause acrash in which you can be hurtor killed.

Follow all instructions in thisowner’s manual regardingaccessories and modifications.

Some examples are:

Larger or smaller wheels and tirescan interfere with the operation ofyour vehicle’s anti-lock brakes andother systems.

Removing parts from your vehicle,or replacing components withnon-Honda components couldseriously affect your vehicle’shandling, stability, and reliability.

Raising your vehicle with anon-Honda suspension kit canaffect the handling and stability.

Non-Honda wheels, because theyare a universal design, can causeexcessive stress on suspensioncomponents.

If you plan to modify your vehicle,consult your dealer.

Modifying your steering wheel orany other part of your vehicle’ssafety features can make thesystems ineffective.Lowering your vehicle with a

non-Honda suspension kit thatsignificantly reduces groundclearance can allow theundercarriage to hit speed bumpsor other raised objects, whichcould cause the airbags to deploy.

Modifying Your Vehicle

Accessories and Modifications

Before

Driving

157

Your vehicle has several convenientstorage areas:

Glove boxDoor pockets

However, carrying too much cargo,or improperly storing it, can affectyour vehicle’s handling, stability,stopping distance, and tires, andmake it unsafe. Before carrying anytype of cargo, be sure to read thefollowing pages.

TrunkConsole compartmentCenter pocket

Carrying Cargo

158

CONSOLE COMPARTMENT

CENTER POCKET

TRUNK

DOOR POCKETS

GLOVE BOX

－ ×

Steps for Determining Correct LoadLimit:

Locate the statement, ‘‘thecombined weight of occupants andcargo should never exceed 850lbs’’ on your vehicle’s placard.[The placard is on the driver’sdoorjamb.]

Determine the combined weightof the driver and passengers thatwill be riding in your vehicle.

Determine the combined weightof luggage and cargo being loadedon the vehicle. That weight maynot safely exceed the availablecargo and luggage load capacitycalculated in step 4.

In addition, the total weight of thevehicle, all passengers,accessories, and cargo must notexceed the Gross Vehicle WeightRating (GVWR) or the Gross AxleWeight Rating (GAWR). Both areon a label on the driver’s doorjamb.

Subtract the combined weight ofthe driver and passengers from850 lbs.

The maximum load for your vehicleis 850 lbs (385 kg) for U.S. modelsand 395 kg for Canadian models.This figure includes the total weightof all occupants, cargo, andaccessories.

The resulting figure equals theavailable amount of cargo andluggage load capacity.For example, if the maximum loadis 850 lbs and there will be five 150lb passengers in your vehicle, theamount of available cargo andluggage load capacity is 100 lbs.(850 750 (5 150) = 100 lbs.)

1.

2.

3.

4.

5.

Load Limits

Carrying Cargo

Before

Driving

159

Overloading or improperloading can affect handling andstability and cause a crash inwhich you can be hurt or killed.

Follow all load limits and otherloading guidelines in thismanual.

Store or secure all items that couldbe thrown around and hurtsomeone during a crash.

Distribute cargo evenly on thefloor of the trunk, placing theheaviest items on the bottom andas far forward as possible.

Do not put any items on the rearshelf that could cover the IMAbattery air intake. They can blockyour view, or be thrown aroundthe vehicle during a crash.

If you carry large items thatprevent you from closing the trunk,exhaust can enter the passengerarea. To avoid the possibility of

,follow the instructions on page .

The air intake for the IMA batteryand electronics is located on top ofthe rear shelf. Do not block this airintake; it may cause the IMA batteryand the power control unit tooverheat, causing the IMA system toshut down. It will start working againafter it cools.

Be sure items placed on the floorbehind the front seats cannot rollunder the seats and interfere withthe pedals or seat operation.

Keep the glove box closed whiledriving. If it is open, a passengercould injure their knees during acrash or sudden stop.

52

Air IntakeCarrying Cargo in the Trunk

carbon monoxide poisoning

Carrying Items in the PassengerCompartment

Carrying Cargo

160

AIR INTAKE

Do not spill any liquids over the airintake or put any small foreignobjects in it. This may damage theIMA battery and the power controlunit.

Carrying Cargo

Before

Driving

161

........................Preparing to Drive . 164.......................Starting the Engine . 165

.Automatic Transmission (CVT) . 166...........................................Parking . 172

.............................Braking System . 173...............Anti-lock Brakes (ABS) . 174

...........................Towing a Trailer . 175

This section gives you tips onstarting the engine under variousconditions, and how to operate theautomatic transmissions (CVT). Italso includes important informationon parking your vehicle and thebraking system.

Driving

Driving

163

Make sure all windows, mirrors,and outside lights are clean andunobstructed. Remove frost, snow,or ice.

Check that any items you may becarrying are stored properly orfastened down securely.

Check the seat adjustment (seepage ).

Check the adjustment of theinside and outside mirrors (seepage ).

Check the steering wheeladjustment (see page ).

Make sure the doors are securelyclosed and locked.

Fasten your seat belt. Check thatyour passengers have fastenedtheir seat belts (see page ).

You should do the following checksand adjustments before you driveyour vehicle.

When you start the engine, checkthe gauges and indicators in theinstrument panel (see page ).

Check that the hood and trunk arefully closed.

Visually check the tires. If a tirelooks low, use a gauge to check itspressure (see page ).

1.

2.

3.

8.

7.

6.

14

9.4.

5.

93

57

10.

207

89

75

Preparing to Drive

164

Apply the parking brake.

In cold weather, turn off allelectrical accessories to reducethe drain on the battery.

If the engine does not start within15 seconds, or starts but stallsright away, repeat step 4 with theaccelerator pedal pressed halfwaydown. If the engine starts, releasepressure on the accelerator pedalso the engine does not race.

If the engine fails to start, pressthe accelerator pedal all the waydown, and hold it there whilestarting to clear flooding. If theengine still does not start, returnto step 5.

In cold weather, conventional starteris used instead of the IMA systemstarter. This is normal.

Make sure the shift lever is inPark. Press on the brake pedal.

Without touching the acceleratorpedal, turn the ignition key to theSTART (III) position. Do not holdthe key in the START (III)position for more than 15 secondsat a time. If the engine does notstart right away, pause for at least10 seconds before trying again.

1.

2.

3.

4.5.

6.

78

Starting the Engine

Starting in Cold Weather

Driving

165

The engine is harder to start in coldweather. Also, the thinner air f ound ataltitudes above 8,000 f eet (2,400meters) adds to this problem.

The immobilizer system protects yourvehicle f rom thef t. If an improperly-coded key (or other device) is used, theengine’s f uel system is disabled. Formore inf ormation, see page .

Honda’s Continuously VariableTransmission’s unique designprovides a smooth, constant flow ofpower. It is electronically controlledfor more precise operation andbetter fuel economy.

These indicators on the instrumentpanel show which position the shiftlever is in.

The ‘‘D’’ indicator comes on for afew seconds when you turn theignition switch to the ON (II)position. If it flashes while driving (inany shift position), it indicates apossible problem in the transmission.

If the malfunction indicator lampcomes on along with the ‘‘D’’indicator, there is a problem with theautomatic transmission controlsystem. Avoid rapid acceleration, andhave the transmission checked byyour dealer as soon as possible.

Continuously VariableTransmission (CVT)

Shift Lever Position Indicators

Automatic Transmission (CVT)

166

－To shift from Park to any position,press firmly on the brake pedal andpress the release button on the frontof the shift lever, then pull the lever.You cannot shift out of Park whenthe ignition switch is in the LOCK(0) or the ACCESSORY (I) position.

This position mechani-cally locks the transmission. UsePark whenever you are turning off orstarting the engine. To shift out ofPark, you must press on the brakepedal and have your foot off theaccelerator pedal. Press the releasebutton on the front of the shift leverto move it.

If you have done all of the above andstill cannot move the lever out ofPark, see onpage .

You must also press the releasebutton to shift into Park. To avoidtransmission damage, come to acomplete stop before shifting intoPark. The shift lever must be in Parkbefore you can remove the key fromthe ignition switch.

169

To shift from:P to R

R to PN to RS to LL to SS to DD to ND to SN to DR to N

Do this:Press the brake pedal andpress the release button.

Press the release button.

Move the lever.

CONTINUED

Park (P)

Shift Lock Release

Shifting


Driving

167

SHIFT LEVERRELEASE BUTTON

－

－

－

－

－

When the vehicle reaches themaximum speed in any shift position,you may feel the engine cut in andout. This is caused by a limiter (112mph, 180 km/h) in the engine’scomputer controls. The engine willrun normally when you reduce thespeed to below the maximum.

Press the brakepedal and press the release buttonon the front of the shift lever to shiftfrom Park to reverse. To shift fromreverse to neutral, come to acomplete stop, and then shift. Pressthe release button before shiftinginto reverse from neutral.

Use this position foryour normal driving. Thetransmission automatically adjusts tokeep the engine at the best speed fordriving conditions. To help theengine warm up faster, thetransmission will select ratios that

allow the engine to run at higherspeeds when it is cold.

Use neutral if youneed to restart a stalled engine, or ifit is necessary to stop briefly withthe engine idling. Shift to the Parkposition if you need to leave yourvehicle for any reason. Press on thebrake pedal when you are movingthe shift lever from neutral toanother gear.

Selecting Secondshifts the transmission into a lowerrange of ratios for betteracceleration and increased enginebraking. Use Second when you aregoing down a steep hill, or in stop-and-go driving.

To shift to Low, pressthe release button on the front of theshift lever. Use Low to get morepower when climbing, and formaximum engine braking whengoing down steep hills.

For faster acceleration when in D, Sor L, the transmission willautomatically ‘‘kick down’’ to a lowerrange of ratios by pushing theaccelerator pedal to the floor.

Engine Speed LimiterReverse (R)

Drive (D)

Neutral (N)

Second (S)

Low (L)


168

Remove the key from the ignitionswitch.


Remove the key from the shiftlock release slot, then install thecover. Make sure the notch on thecover is on the shift lever side.Return the key to the ignitionswitch, press the brake pedal, andrestart the engine.

If you need to use the shift lockrelease, it means your vehicle isdeveloping a problem. Have itchecked by your dealer.

Put a cloth on the notch of theshift lock release slot cover. Usinga small flat-tipped screwdriver or ametal fingernail file, carefully pryon the notch of the cover toremove it.

Do this if pushing on the brake pedaland pressing the release button doesnot shift the transmission out ofPark:

Insert a key into the shift lockrelease slot.

Push down on the key while youpress the release button on theshift lever and move the shift leverout of Park to neutral.

1.

2.

3.

4.

5.

6.

Shift Lock Release


Driving

169

SHIFT LOCKRELEASE SLOT

RELEASEBUTTON

NOTCHCOVER

－

－

To maximize fuel economy, yourCivic Hybrid has an Auto Idle Stopfunction. Under certain conditions,the engine will shut off when youcome to a stop. Those conditions are:

The engine coolant is nearly up tonormal operating temperature.

The shift lever is in D or N.

You are not pressing on theaccelerator pedal.

The IMA battery is chargedenough to operate the system.

You are pressing on the brakepedal.

Fan speed lower fan speeds, ineither AUTO or manual modes.

The front window defroster is off.

Outside temperature is between10 100 degrees F.

The Auto Idle Stop function activatesif you speed up to over 8 mph(12 km/h) and brake to a stop. Andit can activate twice even if youspeed up to 8 mph (12 km/h) orbelow and brake to a stop.

The engine will start again when yourelease the brake pedal. It will alsorestart, even if you are still pressingthe brake pedal, under theseconditions:

You move the shift lever from Dor N to R or L.

You press the accelerator pedal.

You are on an incline, and thevehicle begins rolling.

The Auto Idle Stop function mayactivate when you slow down.

Auto Idle Stop


170

If you open the driver’s door whenAuto Stop is active, the indicator willblink and you will hear a continuousbeep. The beep will stop when youclose the door.

With the driver’s door open, you willhear a continuous beep even if theAuto Idle Stop function isdeactivated and the engine restarts.

Always turn the ignition switch tothe LOCK (0) position and removethe key if you are getting out of thevehicle.The indicator blinks as a reminder

that the engine has stopped becauseof the Auto Idle Stop function. Youcannot restart the engine with theignition switch when this indicator isblinking.

Auto Idle Stop Indicator


Driving

171

AUTO IDLE STOP INDICATOR

Make sure the windows are closed.

Turn off the lights.

Place any packages, valuables, etc.,in the trunk or take them with you.

If the vehicle is facing downhill,turn the front wheels toward thecurb.

Make sure the parking brake isfully released before driving away.Driving with the parking brakepartially set can overheat ordamage the rear brakes.

Always use the parking brake whenyou park your vehicle. Make surethe parking brake is set firmly oryour vehicle may roll if it is on anincline.

Lock the doors.

Check the indicator on theinstrument panel to verify that thesecurity system is set.

Never park over dry leaves, tallgrass, or other flammablematerials. The hot three waycatalytic converter could causethese materials to catch on fire.

If the vehicle is facing uphill, turnthe front wheels away from thecurb.

Set the parking brake before you putthe transmission in Park. This keepsthe vehicle from moving and puttingpressure on the parking mechanismin the transmission.

Parking Tips

Parking

172

Never install a sunshade between theupper and lower meters on theinstrument panel. If you do, you couldcause heat damage to the upper meteron a very hot day.

Your vehicle is equipped with frontdisc brakes. The brakes on the rearwheels are drum. A power assisthelps reduce the effort needed onthe brake pedal. The ABS helps youretain steering control when brakingvery hard.

Resting your foot on the brake pedalapplies the brakes slightly. Thisbuilds up heat, and reduces brakeeffectiveness and brake pad life. Inaddition, fuel economy can bereduced. It also keeps your brakelights on all the time, confusingdrivers behind you.

Check the brakes after drivingthrough deep water. Apply thebrakes moderately to see if they feelnormal. If not, apply them gently andfrequently until they do. Be extracautious in your driving.

Your vehicle is equipped with anadvanced hydraulic booster.The advanced hydraulic booster hassome features.

This feature enables you to press thebrake pedal with less force by thehelp of hydraulic pressure in the oilpressure pump.

This feature controls the brakingpressure appropriately, coordinatingwith the regenerating brake of theIMA motor.

When you release the brake pedalwhile the Auto Idle Stop functionactivates, this feature keeps thebraking pressure until the enginestarts, and prevents the vehicle fromdropping back.

This feature helps you apply thebrakes with less force during anemergency braking situation.

Constant application of the brakeswhen going down a long hill buildsup heat and reduces their effective-ness. Use the engine to assist thebrakes by taking your foot off theaccelerator and downshifting to alower gear.

Power-Assist

Cooperative Control with RegenerativeBrake

Creep Aid System

Brake-Assist

Braking System

Driving

173

The electronic brake distribution(EBD) system, which is part of theABS, also balances the front-to-rearbraking distribution according tovehicle loading.

The hydraulic system that operatesthe brakes has two separate circuits.Each circuit works diagonally acrossthe vehicle (the left-front brake isconnected with the right-rear brake,etc.). If one circuit should develop aproblem, you will still have brakingat two wheels.

If the brake pads need replacing, youwill hear a distinctive, metallicscreeching sound when you applythe brake pedal. If you do not havethe brake pads replaced, they willscreech all the time. It is normal forthe brakes to occasionally squeal orsqueak when you apply them.

The anti-lock brake system (ABS)helps prevent the wheels fromlocking up, and helps you retainsteering control by pumping thebrakes rapidly, much faster than aperson can do it.

Let the ABS work for you by alwayskeeping firm, steady pressure on thebrake pedal. This is sometimesreferred to as ‘‘stomp and steer.’’

You will feel a pulsation in the brakepedal when the ABS activates, andyou may hear some noise. This isnormal: it is the ABS rapidlypumping the brakes. On drypavement, you will need to press onthe brake pedal very hard before the

ABS activates. However, you mayfeel the ABS activate immediately ifyou are trying to stop on snow or ice.

If this indicator comes on, the anti-lock function of the braking systemhas shut down. The brakes still worklike a conventional system, butwithout anti-lock. You should haveyour dealer inspect your vehicle assoon as possible.

If the ABS indicator comes on whiledriving, test the brakes as shown onpage .230

You should never pump the brake pedal.

Anti-lock Brakes (ABS)

Braking System Design

Brake Pad Wear Indicators

ABS Indicator

174

Your vehicle is not designed to tow atrailer; attempting to do so can voidyour warranties.

If the ABS indicator and the brakesystem indicator come on together,and the parking brake is fullyreleased, the EBD system may alsobe shut down.

It only helps with steeringcontrol during braking.

such as trying to take acorner too fast or making a suddenlane change. Always drive at a safespeed for the road and weatherconditions.

Always steer moderatelywhen you are braking hard. Severeor sharp steering wheel movementcan still cause your vehicle to veerinto oncoming traffic or off the road.

on loose oruneven surfaces, such as gravel orsnow, than a vehicle without anti-lock.

Test your brakes as instructed onpage . If the brakes feel normal,drive slowly and have your vehiclerepaired by your dealer as soon aspossible. Avoid sudden hard brakingwhich could cause the rear wheels tolock up and possibly lead to a loss ofcontrol.

230

Anti-Lock Brakes (ABS), Towing a Trailer

Towing a TrailerImportant Safety RemindersABS does not reduce the time ordistance it takes to stop thevehicle.

ABS will not prevent a skid thatresults from changing directionabruptly,

ABS cannot prevent a loss ofstability.

A vehicle with ABS may require alonger distance to stop

Driving

175

If you have the skills and tools toperform more complex maintenancetasks on your vehicle, you may wantto purchase the service manual. Seepage for information on how toobtain a copy, or see your dealer.

This section also includesinstructions on how to read themaintenance minder messages onthe information display, amaintenance record, and instructionsfor simple maintenance tasks youmay want to take care of yourself.

This section explains why it isimportant to keep your vehicle wellmaintained and how to follow basicmaintenance safety precautions.

......................Maintenance Safety . 178....................Maintenance Minder . 179....................Maintenance Record . 186

..............................Fluid Locations . 188........................Adding Engine Oil . 189

.........Changing the Oil and Filter . 190..............................Engine Coolant . 192

....................Windshield Washers . 194........................Transmission Fluid .195

Continuously Variable............Transmission (CVT) . 195

....................................Brake Fluid . 196.............................................Lights . 197

................................Roof Antenna . 202................Cleaning the Seat Belts . 203

.....................................Floor Mats . 203..................Dust and Pollen Filter . 204

.................................Wiper Blades . 205...........................................Wheels . 207

...............................................Tires . 207......Checking the 12 Volt Battery . 212

.............................Vehicle Storage . 213

255

Maintenance

Maintenance

177

To eliminate potential hazards, readthe instructions before you begin,and make sure you have the toolsand skills required.

To clean parts, use a commerciallyavailable degreaser or partscleaner, not gasoline.

To reduce the possibility of fire orexplosion, keep cigarettes, sparks,and flames away from the batteryand all fuel-related parts.

Make sure your vehicle is parkedon level ground, the parking brakeis set, and the engine is off.

Some of the most important safetyprecautions are given here. However,we cannot warn you of everyconceivable hazard that can arise inperforming maintenance. Only youcan decide whether or not youshould perform a given task.

Donot run the engine unlessinstructed to do so.

Let theengine and exhaust system cooldown before touching any parts.

Wear eye protection andprotective clothing when workingwith the battery or compressed air.

All service items not detailed in thissection should be performed by acertified technician or qualifiedmechanic.

Be sure there isadequate ventilation whenever youoperate the engine.

Maintenance Safety

Important Safety PrecautionsInjury from moving parts.

Burns from hot parts.

Potential Vehicle HazardsCarbon Monoxide poison fromengine exhaust.

178

Failure to properly followmaintenance instructions andprecautions can cause you tobe seriously hurt or killed.

Always follow the proceduresand precautions in this owner’smanual.

Improperly maintaining thisvehicle or failing to correct aproblem before driving cancause a crash in which you canbe seriously hurt or killed.

Always follow the inspection,maintenance recommendations,and schedules in this owner’smanual.

－－－－－－－－－－－－

CONTINUED

Calculated EngineOil Life (%)100 % 91 %90 % 81 %80 % 71 %70 % 61 %60 % 51 %50 % 41 %40 % 31 %30 % 21 %20 % 16 %15 % 11 %10 % 6 %5 % 1 %

0 %

DisplayedEngine Oil Life (%)

100 %90 %80 %70 %60 %50 %40 %30 %20 %15 %10 %5 %0 %

Based on the engine operatingconditions and accumulated enginerevolutions, the onboard computer inyour vehicle calculates the remainingengine oil life and displays it as apercentage.

The remaining engine oil life isshown on the display according tothis table:

To see the current engine oil life,turn the ignition switch to the ON(II) position, and press the SEL/RESET button repeatedly until theengine oil life display appears (seepage ).

Your vehicle displays engine oil lifeand maintenance service items onthe information display to show youwhen you should have your dealerperform engine oil replacement andindicated maintenance service.

64

Maintenance Minder

Engine Oil Life Display

Maintenance

179

SEL/RESET BUTTON

ENGINE OIL LIFE DISPLAY

The maintenance item code or codesindicate the main and sub itemsrequired at the time of the oil change(see page ).

If the remaining engine oil life is 15to 6 percent, you will see the engineoil life indicator every time you turnthe ignition switch to the ON (II)position. The maintenance minderindicator will also come on, and themaintenance item code(s) for otherscheduled maintenance itemsneeding service will be displayednext to the engine oil life indicator.

When the remaining engine oil life is5 to 1 percent, you will see a‘‘SERVICE OIL LIFE’’ messagealong with the same maintenanceitem code(s), every time you turn theignition switch to the ON (II)position.

185

Maintenance Minder

180

ENGINE OILLIFE DISPLAY

MAINTENANCEMINDER INDICATOR

MAINTENANCE ITEM CODE(S)

If you still do not perform theindicated maintenance, you will seenegative mileage. It is displayedwhen you drive more than 10 miles(for U.S. models) or 10 km (forCanadian models) after seeing the 0percent message. Afterward, itshows your driving distance if youcontinue to drive. Immediately havethe indicated maintenance done byyour dealer.

When the remaining engine oil life is0 percent, the engine oil life indicatorwill blink. The display comes onevery time you turn the ignitionswitch to the ON (II) position. Whenyou see this message, have theindicated maintenance performed byyour dealer as soon as possible.

You can change the informationdisplay from the engine oil lifedisplay to the odometer, the tripmeter, or the outside temperatureevery time you press and release theSEL/RESET button.

When the engine oil life is 0 percentor negative mileage, themaintenance minder indicatorremains on even if you change theinformation display.

Immediately have the service done,and make sure to reset the display asdescribed on the next page.

Maintenance Minder

Maintenance

181

Your dealer will reset the displayafter completing the requiredmaintenance service. You will see‘‘OIL LIFE 100%’’ on the informationdisplay the next time you turn theignition switch to the ON (II)position.

Press the SEL/RESET buttonrepeatedly until the engine oil lifeis displayed.

All maintenance items displayed inthe information display are in code.For an explanation of thesemaintenance codes, see page .

Press the SEL/RESET button forabout 10 seconds. The engine oillife and the maintenance itemcode(s) will blink.

If maintenance service is done bysomeone other than your dealer,reset the maintenance minder asfollows:


1.

2.

3.

185

Maintenance Minder

Maintenance Main Items and SubItems

Resetting the Engine Oil LifeDisplay

182

MAINTENANCE MAIN ITEM

MAINTENANCESUB ITEM

If you have the required servicedone but do not reset the display, orreset the display without doing theservice, the system will not show theproper maintenance intervals. Thiscan lead to serious mechanicalproblems because you will no longerhave an accurate record of whenmaintenance is needed.

Your authorized Honda dealerknows your vehicle best and canprovide competent, efficient service.

However, service at a dealer is notmandatory to keep your warrantiesin effect. Maintenance may be doneby any qualified service facility orperson who is skilled in this type ofautomotive service. Make sure tohave the service facility or personreset the display as previouslydescribed. Keep all receipts as proofof completion, and have the personwho does the work fill out themaintenance record. Check yourwarranty booklet for moreinformation.

We recommend using Honda partsand fluids whenever you havemaintenance done. These aremanufactured to the same highquality standards as the originalcomponents, so you can be confidentof their performance and durability.

Press the SEL/RESET button formore than 5 seconds. Themaintenance item code(s) willdisappear, and the engine oil lifewill reset to ‘‘100.’’

4.

CONTINUED

Maintenance Minder

Important MaintenancePrecautions

Maintenance

183

－

－

－

－

－

－

＃

You should check the followingitems at the specified intervals. Ifyou are unsure of how to performany check, turn to the appropriatepage listed.

Engine oil level Check everytime you fill the fuel tank. Seepage .

Engine coolant level Check theradiator reserve tank every timeyou fill the fuel tank. See page .

Automatic transmission Checkthe fluid level monthly. See page

.

Brakes Check the fluid levelmonthly. See page .

Tires Check the tire pressuremonthly. Examine the tread forwear and foreign objects. See page

.

Lights Check the operation ofthe headlights, parking lights,taillights, high-mount brake light,turn signals, brake lights, andlicense plate light monthly. Seepage .

According to state and federalregulations, failure to performmaintenance on the items markedwith will not void your emissionswarranties. However, allmaintenance services should beperformed in accordance with theintervals indicated by theinformation display.

153

154

195

196

207

197

U.S. Vehicles:

Maintenance Minder

Owner’s Maintenance ChecksMaintenance, replacement, orrepair of emissions controldevices and systems may be doneby any automotive repairestablishment or individual usingparts that are ‘‘certif ied’’ to EPAstandards.

184

＃

＃

＃

Maintenance Minder

185

:

Maintenance Sub ItemsRotate tiresReplace air cleaner element

If you drive in dusty conditions, replaceevery 15,000 miles (24,000 km).

Replace dust and pollen filterIf you drive primarily in urban areas that have highconcentrations of soot in the air from industry andfrom diesel-powered vehicles, replace every 15,000miles (24,000 km).

Inspect drive beltReplace transmission fluidReplace spark plugsInspect valve clearanceReplace engine coolant

Maintenance Main ItemsReplace engine oilReplace engine oil and oil filterInspect front and rear brakesCheck parking brake adjustmentInspect these items:

Tie rod ends, steering gear box, and bootsSuspension componentsDriveshaft bootsBrake hoses and lines (including ABS)All fluid levels and condition of fluidsExhaust systemFuel lines and connections

AB

Symbol Symbol12

34

5If the message ‘‘SERVICE OIL’’ does not appear more than 12 months afterthe display is reset, change the engine oil every year.

Independent of the maintenance minder display, replace the brake fluidevery 3 years.

Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.

See information on maintenance and emissions warranty on page .

Inspect idle speed every 160,000 miles (256,000 km).

NOTE:

1 :

183

1

1

Main

tenance

Min

der

Maintenance Record

186

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

You or the servicing dealer can record all completed maintenance here. When maintenance is performed, record the mileage, circle the coded item(s)completed, and write in any other non-coded items (such as brake fluid replacement) below the codes. Keep the receipts for all work done on yourvehicle. Maintenance can also be recorded in your Honda service history booklet.

Mileage

km

km

km

km

km

km

km

Signature

Date

Mileage

km

km

km

km

km

km

km

Signature

Date

MaintenancePerformed

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5


A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

Maintenance Record

Maintenance

187

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

mi

Mileage

km

km

km

km

km

km

km

Signature

Date

Mileage

km

km

km

km

km

km

km

Signature

Date


A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5


A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

A B 1 2 3 4 5

Fluid Locations

188

RADIATOR CAP

ENGINE OIL DIPSTICK(Orange loop)

ENGINE OILFILL CAP

WASHER FLUID(Blue cap)

AUTOMATICTRANSMISSION (CVT)FLUID DIPSTICK(Yellow loop)

ENGINE COOLANTRESERVOIR

BRAKE FLUID(Black cap)

The oil viscosity or weight isprovided on the container’s label.

Oil is a major contributor to yourengine’s performance and longevity.Always use a premium-grade 0W-20detergent oil displaying the APICertification Seal. This seal indicatesthe oil is energy conserving, and thatit meets the American PetroleumInstitute’s latest requirements.

Honda Motor Oil is the preferred0W-20 lubricant for your vehicle. It ishighly recommended that you useHonda Motor Oil in your vehicle for

optimum engine protection. Makesure the API Certification Seal says‘‘For Gasoline Engines’’.

A very low-viscosity, fuel-efficient0W-20 oil is the preferred enginelubricant for your Civic Hybrid. Thisspecial oil is formulated to help yourengine use less fuel. It is available atyour dealer. A 5W-20 oil may be usedif 0W-20 is not available.

Unscrew and remove the engine oilfill cap on the valve cover. Pour inthe oil slowly and carefully so you donot spill any. Clean up any spillsimmediately. Spilled oil coulddamage components in the enginecompartment. Reinstall the engineoil fill cap, and tighten it securely.Wait a few minutes, and recheck theoil level on the engine oil dipstick.Do not fill above the upper mark; youcould damage the engine.

Recommended Engine Oil

Adding Engine Oil

Maintenance

189

API CERTIFICATION SEAL

ENGINE OILFILL CAP

Ambient Temperature

You may use a synthetic motor oil ifit meets the same requirementsgiven for a conventional motor oil: itdisplays the API certification seal,and it is the proper weight. You mustfollow the oil and filter changeintervals shown on the informationdisplay.

Always change the oil and filteraccording to the maintenancemessages shown on the informationdisplay. The oil and filter collectcontaminants that can damage yourengine if they are not removedregularly.

Run the engine until it reachesnormal operating temperature,then shut it off.

Open the hood, and remove theengine oil fill cap.

Remove the nine holding clipswith a flat-tipped screwdriver andtwo bolts, then pull the under-cover down.

Your vehicle does not require any oiladditives. Additives may adverselyaffect the engine or transmissionperformance and durability.

Changing the oil and filter requiresspecial tools and access fromunderneath the vehicle. The vehicleshould be raised on a service station-type hydraulic lift for this service.Unless you have the knowledge andproper equipment, you should havethis maintenance done by a skilledmechanic.

1.

2.

3. Only on U.S. models

Changing the Oil and FilterSynthetic Oil

Engine Oil Additives

Adding Engine Oil, Changing the Oil and Filter

190

HOLDING CLIP

BOLTS

Refill the engine with therecommended oil.

Engine oil change capacity(including filter):

Let the engine run for severalminutes, then check the drain boltand oil filter for leaks.

Put a new washer on the drain bolt,then reinstall the drain bolt.Tighten the drain bolt to:

Install a new oil filter according tothe instructions that come with it.

Reinstall the engine oil fill cap.Start the engine. The oil pressureindicator should go out within 5seconds. If it does not, turn off theengine, and check your work.

Remove the oil drain bolt andwasher from the bottom of theengine. Drain the oil into anappropriate container.

Remove the oil filter, and let theremaining oil drain. A specialwrench (available from yourdealer) is required.

Make sure the oil filter gasket isnot stuck to the engine block. If itis, remove it before installing anew oil filter.

7.

8.

9.4. 5.

6.

10.

CONTINUED

Changing the Oil and Filter

Maintenance

191

DRAIN BOLT

WASHER

OIL FILTER

3.4 US qt (3.2 )

29 lbf·ft (39 N·m , 4.0 kgf·m)

Turn off the engine, let it sit forseveral minutes, then check the oillevel on the dipstick. If necessary,add more oil.

Put the under-cover back in placeand reinstall the nine holding clips.Lock the clips securely by pushingon the center of each clip.

If the coolant level in the reservetank is at or below the MIN line, addcoolant to bring it up to between theMIN and MAX lines. Inspect thecooling system for leaks.

Always use Honda Long-LifeAntifreeze/Coolant Type 2. Thiscoolant is pre-mixed with 50 %antifreeze and 50 % water. Never addstraight antifreeze or plain water.

If Honda antifreeze/coolant is notavailable, you may use anothermajor-brand non-silicate coolant as atemporary replacement. Make sure itis a high-quality coolantrecommended for aluminum engines.Continued use of any non-Hondacoolant can result in corrosion,causing the cooling system tomalfunction or fail. Have the coolingsystem flushed and refilled withHonda antifreeze/coolant as soon aspossible.

11.

12. Only on U.S. models

Adding Engine Coolant

Changing the Oil and Filter, Engine Coolant

192

RESERVE TANK

Improper disposal of engine oil can beharmf ul to the environment. If youchange your own oil, please dispose ofthe used oil properly. Put it in a sealedcontainer and take it to a recyclingcenter. Do not discard it in a trash binor dump it on the ground.

If the reserve tank is completelyempty, you should also check thecoolant level in the radiator.

The coolant level should be up tothe base of the filler neck. Addcoolant if it is low.

Do not add any rust inhibitors orother additives to your vehicle’scooling system. They may not becompatible with the coolant orengine components.

Pour coolant into the reserve tank.Fill it to halfway between the MAXand MIN marks. Put the cap backon the reserve tank.

Pour the coolant slowly andcarefully so you do not spill any.Clean up any spill immediately; itcould damage components in theengine compartment.

Make sure the engine and radiatorare cool.

Relieve any pressure in the coolingsystem by turning the radiator capcounterclockwise, withoutpressing down.

Remove the radiator cap bypushing down and turningcounterclockwise.

Put the radiator cap back on, andtighten it fully.

1.

2.

3.

4.

5.

6.

Engine Coolant

Maintenance

193

RADIATOR CAP

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.

Check the fluid level in thewindshield washer reservoir at leastmonthly during normal use.

The low washerlevel indicator comes on when thelevel is low (see page ).

Check the fluid level by removingthe cap and looking at the levelgauge.

Fill the reservoir with a good-qualitywindshield washer fluid. Thisincreases the cleaning capability andprevents freezing in cold weather.

When you refill the reservoir, cleanthe edges of the windshield wiperblades with windshield washer fluidon a clean cloth. This will help tocondition them.

61

On Canadian models:

Windshield Washers

194

Do not use engine antif reeze or avinegar/water solution in thewindshield washer reservoir. Antif reezecan damage your vehicle’s paint, whilea vinegar/water solution can damagethe windshield washer pump. Use onlycommercially-available windshieldwasher f luid.

Check the fluid level with the engineat normal operating temperature.

Remove the dipstick (yellow loop)from the transmission, and wipe itwith a clean cloth.

Insert the dipstick all the way intothe transmission securely asshown in the illustration.

Remove the dipstick and checkthe fluid level. It should bebetween the upper and lowermarks within the HOT range.

If the level is below the lowermark, add fluid into the dipstickhole to bring it to the levelbetween the upper and lowermarks.

Pour the fluid slowly and carefullyso you do not spill any. Clean upany spill immediately; it coulddamage components in the enginecompartment.

Always use Honda CVT Fluid(Continuously VariableTransmission fluid).

Park the vehicle on level ground.Start the engine and let it run untilthe radiator fan comes on, thenshut off the engine. For accurateresults, wait about 60 secondsbefore going to step 2, but don’twait longer than 90 seconds.

3.

4.

5.2.

1.

CONTINUED

Continuously VariableTransmission (CVT)

Transmission Fluid

Maintenance

195

DIPSTICK UPPERMARK

LOWERMARK

HOTRange

Insert the dipstick all the way backinto the transmission securely.

The transmission should be drainedand refilled with new fluid when thisservice is indicated by a maintenancemessage on the information display.

If you are not sure how to add fluid,contact your dealer.

Check the brake fluid level in thereservoirs monthly.

To thoroughly flush thetransmission, the technicianshould drain and refill it withHonda CVT fluid, then drive thevehicle for a short distance. Dothis three times. Then drain andrefill the transmission a final time.

Replace the brake fluid every 3 years,independent of mileage.

Always use Honda Heavy DutyBrake Fluid DOT 3. If it is notavailable, you should use only DOT 3or DOT 4 fluid, from a sealedcontainer, as a temporaryreplacement.

Using any non-Honda brake fluid cancause corrosion and decrease the lifeof the system. Have the brakesystem flushed and refilled withHonda Heavy Duty Brake FluidDOT 3 as soon as possible.

Brake fluid marked DOT 5 is notcompatible with your vehicle’sbraking system and can causeextensive damage.

The fluid level should be betweenthe MIN and MAX marks on the sideof the reservoir. If the level is at orbelow the MIN mark, your brakesystem needs attention. Have thebrake system inspected for leaks orworn brake pads/shoes.

6.

Transmission Fluid, Brake Fluid

Brake Fluid

196

MAX

MIN

CONTINUED

The headlights were properly aimedwhen your vehicle was new. If youregularly carry heavy items in thetrunk, readjustment may be required.Adjustment should be done by yourdealer or other qualified mechanic.

Your vehicle has halogen headlightbulbs. When replacing a bulb, handleit by its base, and protect the glassfrom contact with your skin or hardobjects. If you touch the glass, cleanit with denatured alcohol and a cleancloth.

To change a bulb on the left side,remove the coolant tube from thetwo clips.

Open the hood. Remove the reserve tank from itsholder by pulling it straight up.

1.

Headlight Aiming

Replacing a Headlight Bulb

Lights

High Beam Headlight

Maintenance

197

COOLANT TUBE

CLIP

CLIP HOLDER

Halogen headlight bulbs get very hotwhen lit. Oil, perspiration, or a scratchon the glass can cause the bulb tooverheat and shatter.

If you replaced a headlight bulb onthe driver’s side, reinstall theengine coolant reserve tank.

Remove the electrical connectorfrom the socket by pushing on thetab and pulling the connectordown.

To change the bulb on the driver’sside, start the engine, turn thesteering wheel all the way to theright, then turn off the engine. Tochange the bulb on the passenger’sside, turn the steering wheel to theleft.

Use a flat-tipped screwdriver toremove the two holding clips fromthe inner fender, and pull the innerfender cover back.

Remove the bulb from theheadlight assembly by turning itone-quarter turn counterclockwise.

Push the electrical connector backonto the bulb. Make sure it is onall the way.

Install the new bulb, and turn itone-quarter turn clockwise to lockit in place.

Turn on the headlights to test thenew bulb.

2.

3.

2.

4.

5.

6.

7.

1.

Low Beam Headlight

Lights

198

TAB

HOLDING CLIP

SOCKET

CONNECTOR

BULB

To change the bulb on the driver’sside, start the engine, turn thesteering wheel all the way to theright, then turn off the engine. Tochange the bulb on the passenger’sside, turn the steering wheel to theleft.

Remove the electrical connectorfrom the socket by pushing on thetab and pulling the connectordown.


Install the new bulb, and turn itone-quarter turn clockwise to lockit in place.

Push the electrical connector backonto the bulb. Make sure it is onall the way.

Turn on the headlights to test thenew bulb.

Reinstall the inner fender cover.Then reinstall the holding clips,and lock them in place by pushingon their centers.

5.

6.

1.

7.

8.

3.

4.

CONTINUED

Lights

Replacing the Front Side Marker/Turn Signal Light Bulb

Maintenance

199

TAB

HOLDING CLIPSOCKET

BULB

Open the trunk.Use a flat-tipped screwdriver toremove the two holding clips fromthe inner fender, and pull the innerfender cover back.

Remove the bulb from the socketby pushing the bulb in and turningit counterclockwise until it unlocks.

Install the new bulb in the socket.Turn it clockwise to lock it in place.

Insert the socket back into theheadlight assembly. Turn itclockwise to lock it in place.

Reinstall the inner fender cover.Then reinstall the holding clips,and lock them in place by pushingon their centers.

Turn on the lights to make surethe new bulb is working.


Use the flat-tipped screwdriver toremove the screws in the center ofeach fastener on the side of theboot lining. Remove the fastenersfirst, then pull the lining backcarefully.Determine which of the four bulbsis burned out: stop/tail-light, back-up light, side marker light, or turnsignal light.

1.

4.

5.

6.

7.

8.

3.

2.

2.

Replacing Rear Bulbs(In Fenders)

Lights

200

FASTENER

FASTENERBULB

Remove the socket by turning itone-quarter turn counterclockwise.

Pull the bulb straight out of itssocket. Push the new bulb straightinto the socket until it bottoms.

Reinstall the socket into the lightassembly by turning it clockwiseuntil it locks.

Put the fasteners into the holes onthe side of the trunk lining.Reinstall the screws.

Reinstall the trunk lining. Makesure it is installed under the edgeof the trunk seal.


Open the trunk.

Use the Phillips-head screwdriver toremove the screws in the center ofeach fastener on the back of the bootlid. Remove the fasteners first, thenpull the lining back carefully.

1.

4.

5.

6.

7.

8.

3.

CONTINUED

Replacing Rear Bulbs(in Trunk Lid)

Lights

Maintenance

201

BULBS

SOCKETS

SOCKETS

BULB

BULB FASTENER

Pull the bulb straight out of itssocket. Push the new bulb straightinto the socket until it bottoms.

Insert the socket back into thelight assembly. Turn it clockwiseto lock it in place.

Push the trunk lid trim back intoposition.

Put the fasteners into the holes onthe trunk lid trim. Reinstall thescrews.

Before using an automatic car wash,remove the radio antenna so it doesnot get damaged. Remove theantenna by unscrewing it. When youreinstall the antenna, tighten itsecurely.

Before entering or parking in areaswith low ceiling height, remove theantenna.


Remove the socket by turning itone-quarter turn counterclockwise.

2.

3.

4.

5.

6.

7.

Roof Antenna

Lights, Roof Antenna

202

BULB

SOCKET

If your seat belts get dirty, use a softbrush with a mixture of mild soapand warm water to clean them. Donot use bleach, dye, or cleaningsolvents. Let the belts air dry beforeyou use the vehicle.Dirt build-up in the loops of the seatbelt anchors can cause the belts toretract slowly. Wipe the insides ofthe loops with a clean clothdampened in mild soap and warmwater or isopropyl alcohol.

The floor mats that came with yourvehicle hooks over the floor matanchors. This keeps the floor matfrom sliding forward and possiblyinterfering with the pedals.

If you remove the driver’s floor mat,make sure to re-anchor it when youput it back in your vehicle.

If you use non-Honda floor mats,make sure they fit properly and thatthey can be used with the floor matanchors. Do not put additional floormats on top of the anchored mats.

CONTINUED

If equipped

Seat Belts Floor Mats

Cleaning the Seat Belts, Floor Mats

Maintenance

203

LOOP

This filter removes the dust andpollen that is brought in from theoutside through the heating andcooling system/climate controlsystem.

Have your dealer replace the filterwhen this service is indicated by amaintenance message on theinformation display. It should bereplaced every 15,000 miles (24,000km) if you drive primarily in urbanareas that have high concentrationsof soot in the air, or if the flow fromthe heating and cooling systembecomes less than usual.

Check the condition of the wiperblades at least every 6 months.Replace them if you find signs ofcracking in the rubber, and areasthat are getting hard or if they leavestreaks and unwiped areas whenused.

To replace a wiper blade:

Raise each wiper arm off thewindshield, lifting the driver’s sidefirst, then the passenger’s side.

1.

Dust and Pollen Filter, Wiper Blades

Dust and Pollen Filter Wiper Blades

204

WIPER ARMS

Do not open the hood when the wiperarms are raised, or you will damage thehood and wiper arms.

CONTINUED

Remove the cover, by squeezingthe two tabs and pulling it straightout.

As shown above, cover the tip of aflat-tipped screwdriver with a clothand move the screwdriver in thedirection of the arrow.

Disconnect the blade assemblyfrom the wiper arm:

Press and hold the lock tab.Slide the blade assembly towardthe lock tab until it releasesfrom the wiper arm.

When replacing a wiper blade,make sure not to drop the wiperblade or wiper arm down on thewindshield.

2. 3.

Wiper Blades

Maintenance

205

COVERBLADE ASSEMBLY

TAB

Remove the blade from the bladeassembly:

Find the side of the bladelabeled ‘‘LOCK.’’ This is the sideyou pull out.Pull back the end of the bladeassembly on the ‘‘LOCK’’ side ofthe blade. Then grab the end ofthe blade, and slide it out.

Examine the new wiper blades. Ifthey have no plastic or metalreinforcement along the backedge, remove the metalreinforcement strips from the oldwiper blade, and install them inthe slots along the edge of the newblade.

Lower the wiper arm down againstthe windshield, the passenger’sside first, then the driver’s side.

Make sure the blade is completelyinstalled and that its edge is notbunched up.

Install the new blade onto theblade assembly:

Pull back either end of the bladeassembly.Place the side of the blade notlabeled ‘‘LOCK’’ on the end ofthe blade assembly, and slidethe blade onto the assemblyuntil it is fully installed.

Slide the wiper blade assemblyonto the wiper arm. Make sure itlocks in place.

Reinstall the cover onto the bladeassembly.

4. 5.

7.

8.

9.

6.

10.

Wiper Blades

206

WIPER BLADE

REINFORCEMENTSTRIP

Keeping the tires properly inflatedprovides the best combination ofhandling, tread life, and ridingcomfort.

Underinflated tires wear unevenly,adversely affect handling and fueleconomy, and are more likely tofail from being overheated.

Overinflated tires can make yourvehicle ride more harshly, aremore prone to damage from roadhazards, and wear unevenly.

We recommend that you visuallycheck your tires every day. If youthink a tire might be low, check itimmediately with a tire gauge.

To safely operate your vehicle, yourtires must be the proper type andsize, in good condition with adequatetread, and correctly inflated.

The following pages give moredetailed information on how to takecare of your tires and what to dowhen they need to be replaced.

Clean the wheels as you would therest of the exterior. Wash them withthe same solution, and rinse themthoroughly.

Aluminum alloy wheels have aprotective clear-coat that keeps thealuminum from corroding andtarnishing. Cleaning the wheels withharsh chemicals (including somecommercial wheel cleaners) or a stiffbrush can damage the clear-coat. Toclean the wheels, use a milddetergent and a soft brush or sponge.

Inflation GuidelinesTiresWheels

Wheels, Tires

Maintenance

207

Using tires that are excessivelyworn or improperly inflated cancause a crash in which you canbe seriously hurt or killed.

Follow all instructions in thisowner’s manual regarding tireinflation and maintenance.

Use a gauge to measure the airpressure in each tire at least once amonth. Even tires that are in goodcondition may lose 1 to 2 psi (10 to20 kPa, 0.1 to 0.2 kgf/cm ) permonth. Remember to check thespare tire at the same time.

Check the air pressures when thetires are cold. This means thevehicle has been parked for at least 3hours, or driven less than 1 mile (1.6km). Add or release air, if needed, tomatch the recommended cold tirepressures.

If you check air pressures when thetires are hot [driven for several miles(kilometers)], you will see readings 4to 6 psi (30 to 40 kPa, 0.3 to 0.4kgf/cm ) higher than the coldreadings. This is normal. Do not letair out to match the recommendedcold air pressure. The tire will beunderinflated.

You should get your own tirepressure gauge and use it wheneveryou check your tire pressures. Thiswill make it easier for you to tell if apressure loss is due to a tire problemand not due to a variation betweengauges.

While tubeless tires have someability to self-seal if they arepunctured, you should look closelyfor punctures if a tire starts losingpressure.

The following chart shows therecommended cold tire pressures formost normal driving conditions.

The compact spare tire pressure is:

See page or refer to the tireplacard on the driver’s doorjamb forcorrect tire pressure.

For convenience, the recommendedtire sizes and cold tire pressures areon a label on the driver’s doorjamb.

243

Tire Size Cold Tire Pressure

Tires

Recommended Tire Pressures

208

60 psi (420 kPa , 4.2 kgf/cm )

P195/65R15 89S32 psi (220 kPa , 2.2kgf/cm )

Front/Rear:

In addition to proper inflation,correct wheel alignment helps todecrease tire wear. If you find a tireis worn unevenly, have your dealercheck the wheel alignment.

Have your dealer check the tires ifyou feel a consistent vibration whiledriving. A tire should always berebalanced if it is removed from thewheel. When you have new tiresinstalled, make sure they arebalanced. This increases ridingcomfort and tire life. For best results,have the installer perform a dynamicbalance.

A tire this worn gives very littletraction on wet roads. You shouldreplace the tire if you can see threeor more tread wear indicators.

Every time you check inflation, youshould also examine the tires fordamage, foreign objects, and wear.

You should look for:

Bumps or bulges in the tread orside of the tire. Replace the tire ifyou find either of these conditions.

Cuts, splits, or cracks in the sideof the tire. Replace the tire if youcan see fabric or cord.

Excessive tread wear.

Your tires have wear indicatorsmolded into the tread. When thetread wears down, you will see a 1/2inch (12.7 mm) wide band across thetread. This shows there is less than1/16 inch (1.6 mm) of tread left onthe tire.

Tire MaintenanceTire Inspection

Tires

Maintenance

209

INDICATOR LOCATION MARKS

TREAD WEAR INDICATOR

Improper wheel weights can damageyour vehicle’s aluminum wheels. Useonly Honda wheel weights f orbalancing.

Replace your tires with radial tires ofthe same size, load range, speedrating, and maximum cold tirepressure rating (as shown on thetire’s sidewall).

Mixing radial and bias-ply tires onyour vehicle can reduce brakingability, traction, and steeringaccuracy. Using tires of a differentsize or construction can cause theABS to work inconsistently.

It is best to replace all four tires atthe same time. If that is not possibleor necessary, replace the two fronttires or two rear tires as a pair.Replacing just one tire can seriouslyaffect your vehicle’s handling.

The ABS works by comparing thespeed of the wheels. When replacingtires, use the same size originallysupplied with the vehicle. Tire sizeand construction can affect wheel

speed and may cause the system toactivate.

If you ever replace a wheel, makesure the new one matches thespecifications of the original.Replacement wheels are available atyour dealer.

To help increase tire life anddistribute wear more evenly, rotatethe tires according to themaintenance messages displayed onthe information display. Move thetires to the positions shown in thechart each time they are rotated. Ifyou purchase directional tires, rotateonly front-to-back.

Replacing Tires and WheelsTire Rotation

Tires

210

Front Front

(Front Non-directionalTires and Wheels)

(Front DirectionalTires and Wheels)

Installing improper tires on yourvehicle can affect handling andstability. This can cause a crashin which you can be seriouslyhurt or killed.

Always use the size and type oftires recommended in thisowner’s manual.

＋

When installing cables, follow themanufacturer’s instructions, andmount them as tight as you can.Make sure they are not contactingthe brake lines or suspension. Driveslowly with them installed. If youhear them coming into contact withthe body or chassis, stop andinvestigate. Remove them as soon asyou begin driving on cleared roads.

If you mount snow tires on yourvehicle, make sure they are radialtires of the same size and load rangeas original tires. Mount snow tires onall four wheels. The tractionprovided by snow tires on dry roadsmay be lower than your original tires.Check with the tire dealer formaximum speed recommendations.

Wheels:

Tires:

See page for DOT tire qualitygrading information, and page

for tire size information.

Tires marked ‘‘M S’’ or ‘‘AllSeason’’ on the sidewall have an all-weather tread design suitable formost winter driving conditions.

For the best performance in snowyor icy conditions, you should installsnow tires or tire chains. They maybe required by local laws undercertain conditions.

Because your vehicle has limited tireclearance, mount only SAE Class ‘‘S’’cable-type traction devices, withrubber chain tensioners, on the fronttires. Use traction devices only whenrequired by driving conditions orlocal laws. Make sure they are thecorrect size for your tires. Metal link-type ‘‘chains’’ should not be used.

244

246

Snow Tires

Tire Chains

Wheel and Tire Specifications

Winter Driving

Tires

Maintenance

211

15 x 6 J

P195/65R15 89S

Traction devices that are the wrongsize or improperly installed candamage your vehicle’s brake lines,suspension, body, and wheels. Stopdriving if they are hitting any part ofthe vehicle.

－

Check the condition of the 12 voltbattery monthly by looking at thetest indicator window. The label onthe battery explains the testindicator’s colors.

If your vehicle’s 12 volt battery isdisconnected or goes dead, the IMAbattery level gauge reading will notbe correct the next time you turn theignition switch to the ON (II)position. It will show less than theactual level temporarily. It will showthe correct level after you drive forat least 30 minutes.

Check the terminals for corrosion (awhite or yellowish powder). Toremove it, cover the terminals with asolution of baking soda and water. Itwill bubble up and turn brown. Whenthis stops, wash it off with plainwater. Dry off the battery with acloth or paper towel. Coat theterminals with grease to help preventfurther corrosion.

If additional battery maintenance isneeded, see your dealer or aqualified technician.

Battery posts,terminals, and related accessoriescontain lead and lead compounds.

If you need to connect the battery toa charger, disconnect both cables toprevent damaging your vehicle’selectrical system. Always disconnectthe negative ( ) cable first, andreconnect it last.

Checking the 12 Volt Battery

WARNING:

Wash your hands after handling.

212

TEST INDICATOR WINDOW

The battery gives off explosivehydrogen gas during normaloperation.

A spark or flame can cause thebattery to explode with enoughforce to kill or seriously hurt you.

Wear protective clothing and aface shield, or have a skilledtechnician do the batterymaintenance.

Fill the fuel tank.

Change the engine oil and filter.

Block the rear wheels.

Wash and dry the exteriorcompletely.

Clean the interior. Make sure thecarpeting, floor mats, etc., arecompletely dry.

If you need to park your vehicle foran extended period (more than 1month), there are several things youshould do to prepare it for storage.Proper preparation helps preventdeterioration and makes it easier toget your vehicle back on the road. Ifpossible, store your vehicle indoors. Leave one window open slightly (if

the vehicle is being storedindoors).

Cover the vehicle with a‘‘breathable’’ cover, one madefrom a porous material such ascotton. Non-porous materials, suchas plastic sheeting, trap moisture,which can damage the paint.

To minimize sticking, apply asilicone spray lubricant to all doorand trunk seals. Also, apply avehicle body wax to the paintedsurfaces that mate with the doorand trunk seals.

Support the front wiper bladearms with a folded towel or rag sothey do not touch the windshield.

Disconnect the 12 volt battery.

Reconnect the 12 volt battery anddrive your vehicle every month forabout 30 minutes. This will keepthe IMA battery charged and ingood condition.

Leave the parking brake off. Putthe transmission in Park.

If the vehicle is to be stored for alonger period, it should besupported on jackstands so thetires are off the ground.

If possible, periodically run theengine until it reaches fulloperating temperature (thecooling fans cycle on and offtwice). Preferably, do this once amonth.

Vehicle Storage

Maintenance

213

If this vehicle is unused f or over onemonth, the service lif e of the 158VNickel-Metal Hydride battery will bereduced and the battery may bepermanently damaged.

This section covers the morecommon problems that motoristsexperience with their vehicles. Itgives you information about how tosafely evaluate the problem and whatto do to correct it. If the problem hasstranded you on the side of the road,you may be able to get going again.If not, you will also find instructionson getting your vehicle towed.

......................Compact Spare Tire . 216....................Changing a Flat Tire . 217

.............If the Engine Won’t Start . 221................................Jump Starting . 223

..............If the Engine Overheats . 225.........Low Oil Pressure Indicator . 227..........Charging System Indicator . 228

.......Malfunction Indicator Lamp . 229...............Brake System Indicator . 230

..............................................Fuses . 231..............................Fuse Locations . 235

......................Emergency Towing . 237

Taking Care of the Unexpected

Taking

Care

ofthe

Unexpected

215

Check the inflation pressure of thecompact spare tire every time youcheck the other tires. It should beinflated to:

Follow these precautions:

Never exceed 50 mph (80 km/h).

This tire gives a harsher ride andless traction on some roadsurfaces. Use greater cautionwhile driving.

Replace the tire when you can seethe tread wear indicator bars. Thereplacement should be the same sizeand design tire, mounted on thesame wheel. The spare tire is notdesigned to be mounted on a regularwheel, and the spare wheel is notdesigned for mounting a regular tire.

Do not mount snow chains on thecompact spare tire.

Do not use your compact sparetire on another vehicle unless it isthe same make and model.

Use the compact spare tire as atemporary replacement only. Getyour regular tire repaired or replaced,and put it back on your vehicle assoon as you can.

Compact Spare Tire

216

INDICATOR LOCATION MARK

TREAD WEAR INDICATOR BAR

60 psi (420 kPa , 4.2 kgf/cm )

CONTINUED

If you have a flat tire while driving,stop in a safe place to change it.Drive slowly along the shoulder untilyou get to an exit or an area to stopthat is far away from the traffic lanes.

Park the vehicle on firm, level, andnon-slippery ground. Put thetransmission in Park. Apply theparking brake.

Open the trunk. Raise the trunkfloor by lifting up on the back edge.

Turn on the hazard warning lights,and turn the ignition switch to theLOCK (0) position. Have allpassengers get out of the vehiclewhile you change the tire.

Take the tool case out of the sparetire.

Unscrew the wing bolt and takethe spare tire out of its well.

5.

4.

3.

2.

1.

Changing a Flat Tire

Taking

Care

ofthe

Unexpected

217

JACK

SPARE TIRETRUNK FLOOR

TOOL CASE

The vehicle can easily roll offthe jack, seriously injuringanyone underneath.

Follow the directions forchanging a tire exactly, andnever get under the vehiclewhen it is supported only by thejack.

Loosen each wheel nut 1/2 turnwith the wheel nut wrench.

Remove the center cap from thewheel with the extension.

Place the jack under the jackingpoint nearest the tire you need tochange. Turn the end bracketclockwise until the top of the jackcontacts the jacking point. Makesure the jacking point tab isresting in the jack notch.

6. 7. 8.


218

JACKING POINTS

WHEEL NUT WRENCH

Use the extension and the wheelnut wrench as shown to raise thevehicle until the flat tire is off theground.

Remove the wheel nuts, thenremove the flat tire. Handle thewheel nuts carefully; they may behot from driving. Place the flat tireon the ground with the outsidesurface facing up.

Before mounting the spare tire,wipe any dirt off the mountingsurface of the wheel and hub witha clean cloth. Wipe the hubcarefully; it may be hot fromdriving.

Put on the spare tire. Put thewheel nuts back on finger-tight,then tighten them in a crisscrosspattern with the wheel nut wrenchuntil the wheel is firmly againstthe hub. Do not try to tighten thewheel nuts fully.

Lower the vehicle to the ground,and remove the jack.

9.

10.

11.

12.

13.

CONTINUED


Taking

Care

ofthe

Unexpected

219

BRAKE HUB

WHEEL NUT WRENCH EXTENSION

Tighten the wheel nuts securely inthe same crisscross pattern. Havethe wheel nut torque checked atthe nearest automotive servicefacility.Tighten the wheel nuts to:

Place the flat tire face down in thespare tire well.

Remove the spacer cone from thewing bolt, turn it over, and put itback on the bolt.

Secure the flat tire by screwingthe wing bolt back into its hole.

Store the jack in the tool case.

Store the center cap in the trunk.Make sure it does not getscratched or damaged.

Lower the trunk floor, then closethe trunk lid.

14. 15.

16.

17.

18.

19.

20.


220

SPACER CONEWING BOLT

For normaltire

For sparetire

80 lbf·ft (108 N·m , 11 kgf·m)

Loose items can fly around theinterior in a crash and couldseriously injure the occupants.

Store the wheel, jack, and toolssecurely before driving.

Diagnosing why the engine won’tstart falls into two areas, dependingon what you hear when you turn theignition switch to the START (III)position:

If the headlights dim noticeably orgo out when you try to start theengine, either the battery isdischarged or the connections arecorroded. Check the condition ofthe 12 volt battery and terminalconnections (see page ). Youcan then try jump starting thevehicle from a booster battery(see page ).

You hear nothing, or almostnothing. The engine’s startermotor does not operate at all, oroperates very slowly.

You can hear the starter motoroperating normally, or the startermotor sounds like it is spinningfaster than normal, but the enginedoes not start up and run.

When you turn the ignition switch tothe START (III) position, you do nothear the normal noise of the enginetrying to start. You may hear aclicking sound, a series of clicks, ornothing at all.Check these things:

Check the transmission interlock.The transmission must be in Parkor neutral or the starter will notoperate.

Turn the ignition switch to theSTART (III) position. If theheadlights do not dim, check thecondition of the fuses. If the fusesare OK, there is probablysomething wrong with theelectrical circuit for the ignitionswitch or starter motor. You willneed a qualified technician todetermine the problem. See

on page .

Turn the ignition switch to the ON(II) position. Turn on theheadlights, and check theirbrightness. If the headlights arevery dim or do not come on at all,the battery is discharged. See

on page .223 223

212

237

Nothing Happens or the StarterMotor Operates Very Slowly

Emergency Towing

Jump Starting

If the Engine Won’t Start

Taking

Care

ofthe

Unexpected

221

Are you using a properly codedkey? An improperly coded key willcause the immobilizer systemindicator in the instrument panelto blink rapidly (see page ).

Are you using the proper startingprocedure? Refer to

on page .

In this case, the starter motor’sspeed sounds normal, or even fasterthan normal, when you turn theignition switch to the START (III)position, but the engine does not run.

If you find nothing wrong, you willneed a qualified technician to findthe problem. See

on page .

Do you have fuel? Check the fuelgauge; the low fuel indicator maynot be working.

There may be an electricalproblem, such as no power to thefuel pump. Check all the fuses(see page ).

165

59

231

237

The Starter Operates Normally

Starting theEngine

EmergencyTowing

If the Engine Won’t Start

222

＋

＋

Although this seems like a simpleprocedure, you should take severalprecautions.

To jump start your vehicle:

The numbers in the illustration showyou the order to connect the jumpercables.

Connect one jumper cable to thepositive ( ) terminal on yourbattery. Connect the other end tothe positive ( ) terminal on thebooster battery.

You cannot start your vehicle bypushing or pulling it.

Open the hood, and check thephysical condition of the 12 voltbattery.

Turn off all electrical accessories:heater, A/C, climate control, audiosystem, lights, etc. Put thetransmission in Park, and set theparking brake.

1.

2.

3.

CONTINUED

Jump Starting

Taking

Care

ofthe

Unexpected

223

BOOSTER BATTERY

A battery can explode if you donot follow the correct procedure,seriously injuring anyonenearby.

Keep all sparks, open flames,and smoking materials awayfrom the battery.

If a battery sits in extreme cold, theelectrolyte inside can f reeze.Attempting to jump start with a f rozenbattery can cause it to rupture.

－

Start the vehicle. If the startermotor still operates slowly, checkthat the jumper cables have goodmetal-to-metal contact.

Keep the ends of the jumper cablesaway from each other and any metalon the vehicle until everything isdisconnected. Otherwise, you maycause an electrical short.

If the booster battery is in anothervehicle, have an assistant startthat vehicle and run it at a fast idle.

Once your vehicle is running,disconnect the negative cable fromyour vehicle, then from thebooster battery. Disconnect thepositive cable from your vehicle,then from the booster battery.

If your vehicle’s 12 volt battery isdisconnected or goes dead, the IMAbattery level gauge reading will notbe correct the next time you turn theignition switch to the ON (II)position. It will show less than theactual level temporarily. It will showthe correct level after you drive forat least 30 minutes.

Connect the second jumper cableto the negative ( ) terminal onthe booster battery. Connect theother end to the grounding strapas shown. Do not connect thisjumper cable to any other part ofthe engine.

7.

6.

4.

5.

Jump Starting

224

The reading on the vehicle’stemperature gauge should stay inthe midrange. If it climbs to the redmark, you should determine thereason (hot day, driving up a steephill, etc.).

When the current fuel mileage isshown on the display, thetemperature gauge will interrupt onthe display and blink for severaltimes if the coolant temperaturerises to 224°F (118°C) or more. Atthe same time, the beeper soundsonce.

If your vehicle overheats, you shouldtake immediate action. The onlyindication may be the temperaturegauge climbing to or above the redmark. Or you may see steam orspray coming from under the hood.

If you see steam and/or spraycoming from under the hood, turnoff the engine. Wait until you seeno more signs of steam or spray,then open the hood.

If you do not see steam or spray,leave the engine running, andwatch the temperature gauge. Ifthe high heat is due to overloading,the engine should start to cooldown almost immediately. If itdoes, wait until the temperaturegauge reading comes down to themidpoint, then continue driving.

If the temperature gauge stays atthe red mark, turn off the engine.

Safely pull to the side of the road.Put the transmission in Park, andset the parking brake. Turn off allaccessories, and turn on thehazard warning lights.

1.

2.

3.

4.

CONTINUED

If the Engine Overheats

Taking

Care

ofthe

Unexpected

225

Steam and spray from anoverheated engine canseriously scald you.

Do not open the hood if steamis coming out.

Driving with the temperature gaugereading at the red mark can causeserious damage to your engine.

Start the engine, and set theinterior temperature to maximum.Add coolant to the radiator up tothe base of the filler neck. If youdo not have the proper coolantmixture available, you can addplain water. Remember to havethe cooling system drained andrefilled with the proper mixture assoon as you can.

Put the radiator cap back ontightly. Run the engine, and checkthe temperature gauge. If it goesback to the red mark, the engineneeds repair (see

on page ).

If the temperature stays normal,check the coolant level in theradiator reserve tank. If it hasgone down, add coolant to theMAX mark. Put the cap back ontightly.

Using gloves or a large heavycloth, turn the radiator capcounterclockwise, without pushingdown, to the first stop. After thepressure releases, push down onthe cap, and turn it until it comesoff.

Look for any obvious coolant leaks,such as a split radiator hose.Everything is still extremely hot,so use caution. If you find a leak, itmust be repaired before youcontinue driving (see

on page ).

If you don’t find an obvious leak,check the coolant level in theradiator reserve tank (see page

). Add coolant if the level isbelow the MIN mark.

If there was no coolant in thereserve tank, you may need to addcoolant to the radiator. Let theengine cool down until the readingreaches the middle of thetemperature gauge or lowerbefore checking the radiator.

8.

9.

7.

6.

237

10.

11.

5.

154

237

If the Engine Overheats

EmergencyTowing

EmergencyTowing

226

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.

If necessary, add oil to bring thelevel back to the full mark on thedipstick (see page ).

This indicator should nevercome on when the engine isrunning. If it starts flashing

or stays on, the oil pressure hasdropped very low or lost pressure.Serious engine damage is possible,and you should take immediateaction.

The engine running generates the oilpressure. When the Auto Idle Stop isactivated, the engine is stopped, theoil pressure is dropped, and the lowoil pressure indicator does not comeon.

Safely pull off the road, and shutoff the engine. Turn on the hazardwarning lights.

Let the vehicle sit for a minute.Open the hood, and check the oillevel (see page ). An enginevery low on oil can lose pressureduring cornering and other drivingmaneuvers.

Start the engine and watch the oilpressure indicator. If it does not goout within 10 seconds, turn off theengine. There is a mechanicalproblem that needs to be repairedbefore you can continue driving(see on page

).

1.

2.

3.

4.

153

189

237

Low Oil Pressure Indicator

Emergency Towing

Taking

Care

ofthe

Unexpected

227

Running the engine with low oilpressure can cause serious mechanicaldamage almost immediately. Turn of fthe engine as soon as you can saf ely getthe vehicle stopped.

－－

If the Auto Idle Stop is active for anextended period, the chargingsystem indicator may come on. If ithappens, start the engine.

The charging system indicator mayalso come on if the Integrated MotorAssist (IMA) battery charge dropsbelow a desired level and the enginestarts to recharge the battery.

This indicator may blink after youstart the vehicle in the morningwhen the temperature is below 20°F ( 30°C). It will stop blinkingwhen the IMA battery warms up.

If the charging systemindicator comes on brightlywhen the engine is running,

the 12 volt battery is not beingcharged.

Immediately turn off all electricalaccessories. Try not to use otherelectrically operated controls such asthe power windows. Keep the enginerunning; starting the engine willdischarge the battery rapidly.

Go to a service station or garagewhere you can get technicalassistance.

Charging System Indicator

228

If the indicator comes on repeatedly,even though it may turn off as youcontinue driving, have your vehiclechecked by your dealer as soon aspossible.

If the indicator comes onwhile driving, it means oneof the engine’s emissions

control systems may have a problem.Even though you may feel nodifference in your vehicle’sperformance, it can reduce your fueleconomy and cause increasedemissions. Continued operation maycause serious damage.

If the battery in your vehicle hasbeen disconnected or gone dead,these codes are erased. It takes atleast three days of driving undervarious conditions to set the codesagain.

To check if they are set, turn theignition switch to the ON (II)position, without starting the engine.The malfunction indicator lamp willcome on for 20 seconds. If it thengoes off, the readiness codes are set.If it blinks five times, the readinesscodes are not set. If possible, do nottake your vehicle for a stateemissions test until the readinesscodes are set. Refer to

for moreinformation (see page ).

Your vehicle has certain ‘‘readinesscodes’’ that are part of the on-boarddiagnostics for the emissionssystems. In some states, part of theemissions testing is to make surethese codes are set. If they are notset, the test cannot be completed.

If you have recently refueled yourvehicle, the indicator coming oncould be due to a loose or missingfuel fill cap. You will also see a‘‘CHECK FUEL CAP’’ message onthe information display. Tighten thecap until it clicks at least once (seepage ). Tightening the cap willnot turn the indicator offimmediately; it takes at least threedays of normal driving.

151250

StateEmissions Testing

Readiness Code

Malfunction Indicator Lamp

Taking

Care

ofthe

Unexpected

229

If you keep driving with theMalf unction Indicator Lamp on, youcan damage your vehicle’s emissionscontrols and engine. Those repairs maynot be covered by your vehicle’swarranties. This indicator may alsocome on with the ‘‘D’’ indicator.

If the ABS indicator comes on withthe brake system indicator, haveyour vehicle inspected by yourdealer immediately.

However, if the brake pedal does notfeel normal, you should takeimmediate action. A problem in onepart of the system’s dual circuitdesign will still give you braking attwo wheels. You will feel the brakepedal go down much farther beforethe vehicle begins to slow down, andyou will have to press harder on thepedal.

Slow down by shifting to a lowergear, and pull to the side of the roadwhen it is safe. Because of the longdistance needed to stop, it ishazardous to drive the vehicle. Youshould have it towed and repaired assoon as possible (see

on page ).

If you must drive the vehicle a shortdistance in this condition, driveslowly and carefully.

The brake systemindicator normallycomes on when

you turn the ignition switch to theON (II) position and as a reminder tocheck the parking brake. It will stayon if you do not fully release theparking brake.

If the brake system indicator comeson while driving, the brake fluid levelis probably low. Press lightly on thebrake pedal to see if it feels normal.If it does, check the brake fluid levelthe next time you stop at a servicestation (see page ).

If the fluid level is low, take yourvehicle to a dealer, and have thebrake system inspected for leaks orworn brake pads.

If the regenerate brake systemindicator (amber) comes on with theparking brake system indicator (red)with the parking brake released,there may be a malfunction with thepower-assist feature. When thepower-assist feature malfunctions,the brake indicator (red) comes onand a buzzer sounds for a second.The power-assist feature may stopwhen the brake effect is weak. Stopyour vehicle immediately at a safeplace and contact a dealer.

196

237Emergency

Towing

Brake System Indicator

230

CanadaU.S.

The vehicle’s fuses are contained inthree fuse boxes.

The primary and secondary under-hood fuse boxes are in the enginecompartment on the driver’s side.

The interior fuse box is underneaththe steering column.

Fuses

Taking

Care

ofthe

Unexpected

231

TAB

UNDER-HOOD (PRIMARY) UNDER-HOOD (SECONDARY)INTERIOR

FUSE LABEL

Turn the ignition switch to theLOCK (0) position. Make sure theheadlights and all otheraccessories are off.

Remove the cover from the fusebox.

If something electrical in yourvehicle stops working, the first thingyou should check for is a blown fuse.Determine from the chart on pages

and , or the diagram on thefuse box lid, which fuse or fusescontrol that device. Check thosefuses first, but check all the fusesbefore deciding that a blown fuse isthe cause. Replace any blown fuses,and check if the device works.

Check each of the large fuses inthe primary under-hood fuse boxby looking through the top at thewire inside. Remove the screwswith a Phillips-head screwdriver.

1.

2.

3.

235 236

Checking and Replacing Fuses

Fuses

232

BLOWNFUSE BLOWN

If you cannot drive the vehiclewithout fixing the problem, and youdo not have a spare fuse, take a fuseof the same rating or a lower ratingfrom one of the other circuits. Makesure you can do without that circuittemporarily (such as the accessorypower socket or radio).

If you replace the blown fuse with aspare fuse that has a lower rating, itmight blow out again. This does notindicate anything wrong. Replace thefuse with one of the correct rating assoon as you can.

Check the smaller fuses in theunder-hood fuse boxes and all thefuses in the interior fuse box bypulling out each one with the fusepuller provided in the primaryunder-hood fuse box.

Look for a blown wire inside thefuse. If it is blown, replace it withone of the spare fuses of the samerating or lower. The spare fusesare provided back of the under-hood fuse cover.

4. 5.

CONTINUED

Fuses

Taking

Care

ofthe

Unexpected

233

FUSE PULLER

BLOWN

When the audio system is disabled,the clock setting in the audio systemwill be canceled. You will need toreset the clock according to theinstructions in the audio systemsection in this owner’s manual.

If the replacement fuse of thesame rating blows in a short time,there is probably a seriouselectrical problem with yourvehicle. Leave the blown fuse inthat circuit, and have your vehiclechecked by a qualified technician.

6.

Fuses

234

Replacing a f use with one that has ahigher rating greatly increases thechances of damaging the electricalsystem. If you do not have areplacement f use with the proper ratingf or the circuit, install one with a lowerrating.

－－

No.Amps.No. Amps. Circuits Protected

No. Amps. Circuits Protected

Circuits Protected

123

100 A70 A80 A50 A30 A30 A

1

2

3

10 A7.5 A15 A

IMA2IMA1Booster MS

4

56789

1011121314151617181920212223

50 A40 A40 A20 A20 A30 A40 A10 A15 A15 A15 A15 A7.5 A

20 A15 A7.5 A15 A7.5 A10 A

Headlight MainPower Window MainBooster MotorSub Fan MotorMain Fan MotorRear DefoggerBlowerHazardFI SubStop and HornIG Coil (EX)IG Coil (IN)Oil LevelNot UsedNot UsedIG CoilFI MainMG ClutchDBWInterior LightBack Up

Main FuseEPSOption MainIgnition Switch MainABS MotorABS F/S

Fuse Locations

Taking

Care

ofthe

Unexpected

235

UNDER-HOOD PRIMARY FUSE BOX UNDER-HOOD SECONDARY FUSE BOX

－－－－

－

－

－

－

－

No. No.

No.

Amps.Amps.

Amps.

Circuits Protected Circuits Protected

Circuits Protected

12345678

910111213141516

17181920212223242526272829303132333435363738

7.5 A7.5 A10 A10 A10 A7.5 A7.5 A10 A

7.5 A15 A10 A7.5 A

10 A20 A15 A

20 A(7.5 A)(7.5 A)

20 A20 A

(15 A)15 A20 A

20 A20 A

7.5 A10 A7.5 A30 A

Power WindowFuel PumpIG1 ACGABS UnitNot UsedNot UsedNot UsedNot Used

ODSMETERSRSRight Headlight High BeamLeft Headlight High BeamSmall (Interior)Small (Exterior)Right Headlight Low Beam

Left Headlight Low BeamHeadlight High MainSmall (Main)Not UsedHeadlight Low Main(HAC)STSNot UsedDoor LockDriver’s Power WindowNot UsedRear ACC SocketACCPassenger’s Power WindowNot UsedRight Rear Power WindowLeft Rear Power WindowNot UsedACC RadioHACDaytime Running LightWiper

Fuse Locations

236

INTERIOR FUSE BOX

－

－

CONTINUED

If, due to damage, your vehicle mustbe towed with the front wheels onthe ground, do this:

Release the parking brake.Start the engine.Shift to D, then to N.Turn off the engine.

With the front wheels on the ground,it is best to tow the vehicle no fartherthan 50 miles (80 km), and keep thespeed below 35 mph (55 km/h).

If your vehicle needs to be towed,call a professional towing service ororganization. Never tow your vehiclewith just a rope or chain. It is verydangerous.

There are two ways to tow yourvehicle:

The towtruck uses two pivoting arms that gounder the tires (front) and lift themoff the ground. The other two tiresremain on the ground.

The operatorloads your vehicle on the back of atruck.

Leave the ignition switch in theACCESSORY (I) position so thesteering wheel does not lock.

Wheel-lif t Equipment

Flat-bed Equipment

This is anacceptable way to tow yourvehicle.

This is the best way totransport your vehicle.

Emergency Towing

Taking

Care

ofthe

Unexpected

237

Improper towing preparation willdamage the transmission. Follow theabove procedure exactly. If you cannotshif t the transmission or start theengine, your vehicle must betransported with the f ront wheels of fthe ground.

Emergency Towing

238

The steering system can be damaged ifthe steering wheel is locked. Leave theignition switch in the ACCESSORY (I)position, and make sure the steeringwheel turns f reely bef ore you begintowing.

Trying to lif t or tow your vehicle by thebumpers will cause serious damage.The bumpers are not designed tosupport the vehicle’s weight.

The diagrams in this section giveyou the dimensions and capacities ofyour vehicle and the locations of theidentification numbers. It alsoincludes information you shouldknow about your vehicle’s tires andemissions control systems.

................Identification Numbers . 240................................Specifications . 242

DOT Tire Quality Grading......................(U.S. Vehicles) . 244

Uniform Tire Quality..................................Grading . 244.................................Treadwear . 244

......................................Traction . 244.............................Temperature . 245

.................................Tire Labeling . 246

.......................Emissions Controls . 247.....................The Clean Air Act . 247

Crankcase Emissions Control....................................System . 247

Evaporative Emissions Control....................................System . 247

Onboard Refueling Vapor................................Recovery . 247

...Exhaust Emissions Controls . 248....................PGM-FI System . 248

Ignition Timing Control................................System . 248

Exhaust Gas Recirculation...................(EGR) System . 248

Three Way Catalytic...........................Converter . 248

....................Replacement Parts . 248..Three Way Catalytic Converter . 249

..............State Emissions Testing . 250

Technical Information

TechnicalInform

ation

239

Your vehicle has several identifyingnumbers in various places.

The vehicle identification number(VIN) is the 17-digit number yourdealer uses to register your vehiclefor warranty purposes. It is alsonecessary for licensing and insuringyour vehicle. The easiest place tofind the VIN is on a plate fastened tothe top of the dashboard. You cansee it by looking through thewindshield on the driver’s side. It isalso on the certification labelattached to the driver’s doorjamb,and is stamped on the enginecompartment bulkhead. The VIN isalso provided in bar code on thecertification label.

The VIN is also located on theengine bulkhead. Slide the cover onthe engine compartment bulkhead toview the VIN. Always close the coverwhen finished.

Identif ication Numbers

240

CERTIFICATION LABEL

VEHICLE IDENTIFICATION NUMBER

COVER

The engine number is stamped intothe engine block.

The transmission number is on alabel on top of the transmission.

The IMA Motor Number is stampedon the motor housing.

Identif ication Numbers

TechnicalInform

ation

241

ENGINE NUMBER

IMA MOTORNUMBER

TRANSMISSION NUMBER

＊

＊

＊

＊

Specifications

242

Dimensions

Weights

Engine

Capacities

176.7 in (4,489 mm)69.0 in (1,752 mm)56.3 in (1,430 mm)106.3 in (2,700 mm)59.1 in (1,501 mm)60.2 in (1,529 mm)

2.87 x 3.15 in (73.0 x 80.0 mm)82 cu-in (1.339 cm )

10.8

LengthWidthHeightWheelbaseTrack

Gross vehicle weight rating See the certification label attachedto the driver’s doorjamb.

Type

Bore x StrokeDisplacementCompression ratioSpark plugs ILFR6J-11K

SK20HPR-L11

Fuel tank

EnginecoolantEngine oil

Automatictransmissionfluid

3.0 US qt (2.8 )5.4 US qt (5.1 )

2.6 US qt (2.5 )4.8 US qt (4.5 )

Including the coolant in the reserve tank and that remaining in theengineReserve tank capacity: 0.108 US gal (0.41 )Excluding the oil remaining in the engine

13.2 US gal (50 )1.255 US gal (4.75 )1.59 US gal (6.0 )

3.4 US qt (3.2 )3.2 US qt (3.0 )4.0 US qt (3.8 )

Water cooled 4-stroke SOHC i-VTECgasoline engine with Hybrid Electric

FrontRear

Approx.

1 :

2 :

ChangeTotalChange

Without filterTotalChangeTotal

U.S. VehiclesCanada Vehicles

(NGK)(DENSO)

Windshieldwasher reservoir

1

2

Including filter

－－

－－

－－－－－－－－－－－－－

－－

Specifications

TechnicalInform

ation

243

Air Conditioning Fuses

Alignment

12 Volt Battery

Tires

Lights

HFC-134a (R-134a)16 18 oz (450 500 g)

SE-10Y

12 V 60 W

12 V 3 CP

12 V 21/5 W12 V 21 W

7°6’1°39’0°3’

0.00 in (0.0 mm)

P195/65R15 89S

2.0 in (2.0 mm)

Refrigerant typeCharge quantityLubricant oil type

Interior

Under-hood

Toe-in

Camber

Caster

12 V 12.8/14 W12 V 51 W

12 V 21 W

12 V12 V12 V12 V

5 W8 W8 W5 W

Capacity 12 V 35 AH/20 HR

T125/70D15 95M32 psi (220 kPa , 2.2 kgf/cm )60 psi (420 kPa , 4.2 kgf/cm )

Size

Pressure

12 V 2 CP

See page 231 or the fuse labelattached to the inside of the fusebox door under the steeringcolumn.See page 231 or the fuse boxcover.Headlights

Front turn signal/side markerlightsRear turn signal lightsBrake/TaillightsBack-up lightsRear side marker lightsTaillightsLicense plate lightsCeiling lightSpotlightsTrunk light

12 V 28 AH/5 HR

24/2.2 CP FrontRearFrontRearFront

HighLow

(HB3)(HB4)

Front/RearSpareFront/RearSpare

－

Quality grades can be found whereapplicable on the tire sidewallbetween the tread shoulder and themaximum section width. Forexample:

All passenger car tires must conformto Federal Safety Requirements inaddition to these grades.

The traction grades, from highest tolowest, are AA, A, B, and C. Thosegrades represent the tire’s ability tostop on wet pavement as measuredunder controlled conditions onspecified government test surfacesof asphalt and concrete. A tiremarked C may have poor tractionperformance.

Warning: The traction gradeassigned to this tire is based onstraight-ahead braking traction tests,and does not include acceleration,cornering, hydroplaning, or peaktraction characteristics.

The tires on your vehicle meet allU.S. Federal Safety Requirements.All tires are also graded fortreadwear, traction, and temperatureperformance according toDepartment of Transportation(DOT) standards. The followingexplains these gradings.

The treadwear grade is a compara-tive rating based on the wear rate ofthe tire when tested under controlledconditions on a specified governmenttest course. For example, a tiregraded 150 would wear one and one-half (1 1/2) times as well on thegovernment course as a tire graded100. The relative performance oftires depends upon the actual condi-tions of their use, however, and maydepart significantly from the normdue to variations in driving habits,service practices, and differences inroad characteristics and climate.

Uniform Tire Quality Grading

Treadwear 200Traction AATemperature A

Treadwear Traction AA, A, B, C

DOT Tire Quality Grading (U.S. Vehicles)

244

－The temperature grades are A (thehighest), B, and C, representing thetire’s resistance to the generation ofheat and its ability to dissipate heatwhen tested under controlledconditions on a specified indoorlaboratory test wheel. Sustained hightemperature can cause the materialof the tire to degenerate and reducetire life, and excessive temperaturecan lead to sudden tire failure. Thegrade C corresponds to a level ofperformance which all passenger cartires must meet under the FederalMotor Vehicle Safety Standard No.109. Grades B and A representhigher levels of performance on thelaboratory test wheel than theminimum required by law.

Warning: The temperature grade forthis tire is established for a tire thatis properly inflated and notoverloaded. Excessive speed,underinflation, or excessive loading,either separately or in combination,can cause heat buildup and possibletire failure.

Temperature A, B, C

DOT Tire Quality Grading (U.S. Vehicles)

TechnicalInform

ation

245

－

－

－

－

－

－

－

－

－

－

－

－

－

The tires that came on your vehiclehave a number of markings. Thoseyou should be aware of are describedbelow.

Rim diameter in inches.

Load index (a numerical codeassociated with the maximumload the tire can carry).

Speed symbol (analphabetical code indicatingthe maximum speed rating).

Whenever tires are replaced, theyshould be replaced with tires of thesame size. The following is anexample of tire size with anexplanation of what each componentmeans.

Tire construction code (Rindicates radial).

Aspect ratio (the tire’s sectionheight as a percentage of itswidth).

Tire width in millimeters.

Vehicle type (P indicatespassenger vehicle).

The tire identification number (TIN)is a group of numbers and lettersthat look like the following exampleTIN. TIN is located on the sidewallof the tire.

Tire type code.

Date of manufacture.

Max Press The maximum airpressure the tire canhold.

Max Load The maximum load thetire can carry atmaximum air pressure.

Manufacturer’sidentification mark.

This indicates that the tiremeets all requirements ofthe U.S. Department ofTransportation.

P

R

DOT

B97R

FW6X

2202

S

195

65

15

89

Tire Labeling

Tire Size

Tire Identif ication Number

Maximum Tire Pressure

Maximum Tire Load

246

DOT B97R FW6X 2202

P195/65 R15 89S

＊

＊

The burning of gasoline in yourvehicle’s engine produces several by-products. Some of these are carbonmonoxide (CO), oxides of nitrogen(NOx), and hydrocarbons (HC).Gasoline evaporating from the tankalso produces hydrocarbons. Con-trolling the production of NOx, CO,and HC is important to the environ-ment. Under certain conditions ofsunlight and climate, NOx and HCreact to form photochemical ‘‘smog.’’Carbon monoxide does not contri-bute to smog creation, but it is apoisonous gas.

The United States Clean Air Actsets standards for automobileemissions. It also requires thatautomobile manufacturers explain toowners how their emissions controlswork and what to do to maintainthem. This section summarizes howthe emissions controls work.

In Canada, Honda vehicles complywith the Canadian emissionrequirements, as specified in anagreement with EnvironmentCanada, at the time they aremanufactured.

Your vehicle has a positivecrankcase ventilation system. Thiskeeps gasses that build up in theengine’s crankcase from going intothe atmosphere. The positivecrankcase ventilation valve routesthem from the crankcase back to the

intake manifold. They are thendrawn into the engine and burned.

As gasoline evaporates in the fueltank, an evaporative emissionscontrol canister filled with charcoaladsorbs the vapor. It is stored in thiscanister while the engine is off. Afterthe engine is started and warmed up,the vapor is drawn into the engineand burned during driving.

The onboard refueling vaporrecovery (ORVR) system capturesthe fuel vapors during refueling. Thevapors are adsorbed in a canisterfilled with activated carbon. Whiledriving, the fuel vapors are drawninto the engine and burned off.

The Clean Air Act

Crankcase Emissions ControlSystem

Evaporative Emissions ControlSystem

Onboard Refueling VaporRecovery

Emissions Controls

TechnicalInform

ation

247

The exhaust emissions controlsinclude four systems: PGM-FI,ignition timing control, exhaust gasrecirculation, and three way catalyticconverter. These four systems worktogether to control the engine’scombustion and minimize theamount of HC, CO, and NOx thatcome out the tailpipe. The exhaustemissions control systems areseparate from the crankcase andevaporative emissions controlsystems.

The emissions control systems aredesigned and certified to work to-gether in reducing emissions tolevels that comply with the Clean AirAct. To make sure the emissionsremain low, you should use only newHonda replacement parts or theirequivalent for repairs. Using lowerquality parts may increase theemissions from your vehicle.

The emissions control systems arecovered by warranties separate fromthe rest of your vehicle. Read yourwarranty manual for more informa-tion.The PGM-FI system uses sequential

multiport fuel injection.It has three subsystems: air intake,engine control, and fuel control. Thepowertrain control module (PCM)uses various sensors to determinehow much air is going into theengine. It then controls how muchfuel to inject under all operatingconditions.

This system constantly adjusts theignition timing, reducing the amountof HC, CO, and NOx produced.

The exhaust gas recirculation (EGR)system takes some of the exhaustgas and routes it back into the intakemanifold. Adding exhaust gas to theair/fuel mixture reduces the amountof NOx produced when the fuel isburned.

The three way catalytic converter isin the exhaust system. Throughchemical reactions, it converts HC,CO, and NOx in the engine’s exhaustto carbon dioxide (CO ), nitrogen(N ), and water vapor.

2

2

Exhaust Emissions Controls Replacement Parts

PGM-FI System

Ignition Timing Control System

Exhaust Gas Recirculation (EGR)System

Three Way Catalytic Converter

Emissions Controls

248

The three way catalytic convertercontains precious metals that serveas catalysts, promoting chemicalreactions to convert the exhaustgasses without affecting the metals.The catalytic converter is referred toas a three-way catalyst, since it actson HC, CO, and NOx. A replacementunit must be an original Honda partor its equivalent.

The three way catalytic convertermust operate at a high temperaturefor the chemical reactions to takeplace. It can set on fire anycombustible materials that comenear it. Park your vehicle away fromhigh grass, dry leaves, or otherflammables.

A defective three way catalyticconverter contributes to air pollution,and can impair your engine’s per-formance. Follow these guidelines toprotect your vehicle’s three waycatalytic converter.

Always use unleaded gasoline.Even a small amount of leadedgasoline can contaminate thecatalyst metals, making the threeway catalytic converter ineffective.

Keep the engine well maintained.

Have your vehicle diagnosed andrepaired if it is misfiring, back-firing, stalling, or otherwise notrunning properly.

Three Way Catalytic Converter

TechnicalInform

ation

249

THREE WAY CATALYTIC CONVERTER

U.S. model shown

If you take your vehicle for a stateemissions test shortly after thebattery has been disconnected orgone dead, it may not pass the test.This is because of certain ‘‘readinesscodes’’ that must be set in the on-board diagnostics for the emissionssystems. These codes are erasedwhen the battery is disconnected,and set again only after several daysof driving under a variety ofconditions.

If the testing facility determines thatthe readiness codes are not set, youwill be requested to return at a laterdate to complete the test. If you mustget the vehicle retested within thenext two or three days, you cancondition the vehicle for retesting bydoing the following.

Make sure the gas tank is nearly,but not completely, full (around3/4).

Without touching the acceleratorpedal, start the engine, and let itidle for 20 seconds.

Keep the vehicle in Park. Increasethe engine speed to 2,000 rpm, andhold it there until the temperaturegauge rises to at least 1/4 of thescale (about 3 minutes).

Select a nearby lightly traveledmajor highway where you canmaintain a speed of 50 to 60 mphfor at least 20 minutes. Drive onthe highway in D. Do not use thecruise control. When traffic allows,drive for 90 seconds withoutmoving the accelerator pedal.

(Vehicle speed may vary slightly;this is okay.) If you cannot do thisfor a continuous 90 secondsbecause of traffic conditions, drivefor at least 30 seconds, then repeatit two more times (for a total of 90seconds).

Make sure the vehicle has beenparked with the engine off for 6hours or more.

Make sure the ambienttemperature is between 40° and95°F.

Then drive in city/suburbantraffic for at least 10 minutes.When traffic conditions allow, letthe vehicle coast for severalseconds without using theaccelerator pedal or the brakepedal.

Stop the vehicle, turn off theignition switch, and leave it off for30 minutes.

If the testing facility determines thereadiness codes are still not set, seeyour dealer.

Testing of Readiness Codes

State Emissions Testing

250

....Customer Service Information . 252....................Warranty Coverages . 253

Reporting Safety Defects..........................(U.S. Vehicles) . 254

.....................Authorized Manuals . 255

Warranty and Customer Relations

Warranty

andC

ustomer

Relations

251

Honda dealership personnel aretrained professionals. They shouldbe able to answer all your questions.If you encounter a problem that yourdealership does not solve to yoursatisfaction, please discuss it withthe dealership’s management. Theservice manager or general managercan help. Almost all problems aresolved in this way.

If you are dissatisfied with thedecision made by the dealership’smanagement, contact your HondaCustomer Service Office.

U.S. Owners:

Canadian Owners:

In Puerto Rico and the U.S. VirginIslands:

When you call or write, please giveus this information:

Vehicle Identification Number(see page )

Name and address of the dealerwho services your vehicle

Date of purchase

Mileage on your vehicle

Your name, address, and tele-phone number

A detailed description of theproblem

Name of the dealer who sold thevehicle to you

240

Customer Service Information

252

CUSTOMER RELATIONSRELATIONS AVEC LA CLIENTÈLE

American Honda Motor Co., Inc.Honda Automobile Customer ServiceMail Stop 500-2N-7A1919 Torrance BoulevardTorrance, California 90501-2746

Tel: (800) 999-1009

Honda Canada Inc.715 Milner AvenueToronto, ONM1B 2K8

Tel: 1-888-9-HONDA-9Fax: Toll-free 1-877-939-0909

Toronto (416) 287-4776

Bella InternationalP.O. Box 190816San Juan, PR 00919-0816

Tel: (787) 620-7546

－

－

－

－

－

－

－

－

－

Your new vehicle is covered by thesewarranties:

covers your new vehicle, except forthe battery, emissions controlsystems, and accessories, againstdefects in materials andworkmanship.

these twowarranties cover your vehicle’semissions control systems. Time,mileage, and coverage areconditional. Please read yourwarranty booklet for exactinformation.

providescoverage for as long as the pur-chaser of the muffler owns thevehicle.

provides proratedcoverage for a replacement batterypurchased from your dealer.

this warranty gives upto 100 % credit toward a replacementbattery.

a seatbelt that fails to function properly iscovered by a limited warranty.Please read your warranty bookletfor details.

Restrictions and exclusions apply toall these warranties. Please read the2007 Honda warranty informationbooklet that came with your vehiclefor precise information on warrantycoverages. Your vehicle’s originaltires are covered by theirmanufacturer. Tire warrantyinformation is in a separate booklet.

Please refer to the 2007 warrantymanual that came with your vehicle.

covers all Hondareplacement parts against defects inmaterials and workmanship.

Honda accessories are coveredunder this warranty. Time andmileage limits depend on the type ofaccessory and other factors. Pleaseread your warranty booklet fordetails.

all exterior body panels arecovered for rust-through from theinside for the specified time periodwith no mileage limit.

Warranty Coverages

U.S. Owners

Canadian Owners

New Vehicle Limited Warranty

Emissions Control Systems DefectsWarranty and EmissionsPerformance Warranty

Replacement Muffler LifetimeLimited Warranty

Replacement Battery LimitedWarranty

Original Equipment Battery LimitedWarranty

Seat Belt Limited Warranty

Replacement Parts LimitedWarranty

Accessory Limited Warranty

Rust Perforation Limited Warranty

Warranty

andC

ustomer

Relations

253

If NHTSA receives similar com-plaints, it may open an investigation,and if it finds that a safety defectexists in a group of vehicles, it mayorder a recall and remedy campaign.However, NHTSA cannot becomeinvolved in individual problemsbetween you, your dealer, orAmerican Honda Motor Co., Inc.

If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform theNational Highway Traffic SafetyAdministration (NHTSA) in additionto notifying American Honda MotorCo., Inc.

To contact NHTSA, you may call theVehicle Safety Hotline toll-free at1-888-327-4236(TTY: 1-800-424-9153); go to

; or write to:Administrator, NHTSA, 400 SeventhStreet, SW., Washington, DC 20590.You can also obtain otherinformation about motor vehiclesafety from .

Reporting Safety Defects (U.S. Vehicles)

254

http://www.saf ercar.gov

http://www.saf ercar.gov

－

＊

＊

＊

＊２００７

ＨＯＮ

Valid only for sales within the United States. Canadianowners should contact their authorized Honda dealer.The publications shown below can be purchased from Helm

Incorporated. You can order in any of three ways:Detach and mail the order form on the right half of this pageCall Helm Inc. at 1-800-782-4356Go online at

If you are interested in other years or models, contact Helm Inc.at 1-800-782-4356.

(credit card orders only)

Purchasing Factory Authorized Manuals (U.S. only)

Authorized Manuals

Authorized

Manuals

255

ORDER TOLL FREE: 1-800-782-4356

OR

(NOTE: For Credit Card Holder Orders Only)

MINIMUM CREDIT CARD PURCHASE $10.00

Price

Each

$75.00

$50.00

$44.00

$35.00

$29.00

$12.00

$12.00

FREE

Form Description

2006-2007 Honda Civic Hybrid

Electrical Troubleshooting Manual

2006 Model Series Honda Civic 2/4 Door

Body Repair Manual

2007 Honda Civic Hybrid

Navigation System Owner’s Manual


Honda Service History


Quick Start Guide

Order Form for Previous Years-

Indicate Year and Model Desired

Publication

Form Number

61SNC01

61SNC01EL

61SNA30

31SNC610

31SNC800

31SNCM10

31SNCQ10

HON-R

2006-2007 Honda Civic Hybrid Service Manual

2007 Honda Civic Hybrid Owner’s Manual

PUBLICATION NUMBERVEHICLE MODEL

Name YearQty

Price

Each

Total

Price

GRAND TOTAL

HANDLING CHARGE

Mich. Purchases

Add 6% Sales Tax

TOTAL MATERIAL

$6.95

Monday-Friday 8:00 A.M. 6:00 P.M. EST

By completing this form you can order the materials desired. You canpay by check or money order, or charge to your credit card. Mail toHelm Incorporated at the address shown on the back of the order form.

Prices are subject to change withoutnotice and without incurring obligation.

Orders are mailed within 10 days. Pleaseallow adequate time for delivery.

Prices are subject to change without notice and without incurring obligation.

www. helminc. com

－

－

－

ＳＨＩＰ

ＴＯ

ＰＡＹＭＥＮＴ

This manual covers maintenance and recommendedprocedures for repair to engine and chassis components.It is written for the journeyman mechanic, but is simpleenough for most mechanically-inclined owners to under-stand.

This manual describes the procedures involved in thereplacement of damaged body parts.

This manual complements the service manual byproviding in-depth troubleshooting information for eachelectrical circuit in your vehicle.

Authorized Manuals

Service Manual:

Electrical Troubleshooting Manual:

Body Repair Manual:

256

NOTE: Dealers and Companies please provide dealer or company name,and also the name of the person to whose attention the shipment shouldbe sent. For purchases outside U.S.A. please write to the address shownbelow for a quotation.

P.O. BOX 07280·DETROIT, MICHIGAN 48207·1-800-782-4356

Customer Name Attention

Apartment Number

State & Zip CodeCity

Daytime Telephone Number

Check or money order enclosed payable to Helm Inc U.S. funds only.Do not send cash

MasterCard

VISA Check here if your billing address is differentfrom the shipping address shown above.

Account Number Expiration: Mo. Yr.

CUSTOMER SIGNATURE DATE

Street Address No P.O. Box Number

( )

These Publications cannot be returned for credit without receiving advance authorization within 14days of delivery. On returns, a restocking fee may be applied against the original order.

CONTINUED

....................................Accessories . 156ACCESSORY (Ignition Key

.......................................Position) . 79...............Accessory Power Socket . 96

....................Additives, Engine Oil . 190...............................Airbag (SRS) . 9, 21

...Airbags, Additional Information . 21

...Additional Safety Precautions . 32..........Advanced Airbag System . 26

.............................Airbag Service . 32How the Passenger Airbag Off

......................Indicator Works . 31How the Side Airbag Off

......................Indicator Works . 30..How the SRS Indicator Works . 30

How Your Front Airbags.........................................Work . 24

...How Your Side Airbags Work . 28How Your Side Curtain Airbags

.........................................Work . 29........................SRS Components . 21

..............Air Conditioning System . 100.......................Air Pressure, Tires . 208

......................................Antifreeze . 192

Anti-lock Brakes (ABS)...............................Indicator . 59, 174

...................................Operation . 174..............Anti-theft, Audio System . 142

Anti-theft Steering Column..............................................Lock . 79

........................................Armrest . 91................................Audio System . 106

.....Auto Door Locking/Unlocking . 81.........................Auto Door Locking . 81

.....................Auto Door Unlocking . 83........................Auto Idle Stop . 170, 171

...Automatic Seat Belt Tensioners . 19.............Automatic Speed Control . 145

.Automatic Transmission (CVT) . 166..........................Capacity, Fluid . 242

...............Checking Fluid Level . 195.......................................Shifting . 167

Shift Lever Position...............................Indicators . 166

................Shift Lever Positions . 167....................Shift Lock Release . 169

BatteryCharging System

...........................Indicator . 62, 228............................Jump Starting . 223

..............................Maintenance . 212............................Specifications . 243

..............................Before Driving . 149....................................Belts, Seat . 8, 18

.............................Beverage Holder . 96Brakes

...........Anti-lock System (ABS) . 174.............Break-in, New Linings . 150

....................Bulb Replacement . 200...........................................Fluid . 196

...................Pad Wear Indicator . 174.........................................Parking . 94

...........System Indicator . 58, 63, 230.............................Braking System . 173

.................Break-in, New Vehicle . 150..Brightness Control, Instruments . 74

........................Brights, Headlights . 73

Index

A B

IND

EX

I

Bulb Replacement..........................Back-up Lights . 201

.....................Brake Lights . 200, 201........Front Side Marker Lights . 199

...........Front Turn Signal Light . 199.................................Headlights . 197

..........................Parking Lights . 199.........Rear Side Marker Lights . 200..........Rear Turn Signal Lights . 200

............................Specifications . 243..............................Bulbs, Halogen . 197

.........................................Card, PC . 129............................Capacities Chart . 242

.............Carbon Monoxide Hazard . 52.............................Carrying Cargo . 158

.............CAUTION, Explanation of . iii.......................................CD Player . 112

....................................Ceiling Light . 97........................Certification Label . 240

............................................Chains . 211....................Changing a Flat Tire . 217

Changing Oil........................................How to . 190

......................................When to . 179...Charging System Indicator . 62, 228

..............Check Fuel Cap Indicator . 68

............Checklist, Before Driving . 164.....................................Child Safety . 34

Child Seats.............LATCH Anchor System . 43

.............................Lower Anchor . 43............................Tether Anchor . 47

..................Childproof Door Locks . 81....................Cleaning the Wheels . 207

.........................Clock, Setting the . 119........................CO in the Exhaust . 247

............Cold Weather, Starting in . 165..............................Compact Spare . 216

.............Controls, Instruments and . 55Coolant

........................................Adding . 192....................................Checking . 154

.........................Proper Solution . 192...................Temperature Gauge . 65

Crankcase Emissions Control........................................System . 247

............Cruise Control Operation . 145....Customer Service Information . 252

...............DANGER, Explanation of . iii...................................Dashboard . 3, 56

................Daytime Running Lights . 74............Defects, Reporting Safety . 254

........................Defog and Defrost . 104................Defogger, Rear Window . 75..............Defrosting the Windows . 104

....................................Dimensions . 242...............Dimming the Headlights . 73

Dipstick..........Automatic Transmission . 195

..................................Engine Oil . 153..........................Directional Signals . 73

Disc Brake Pad Wear...................................Indicators . 174

.....................................Disc Player . 112..................Display Change Button . 64

.....................Disposal of Used Oil . 192Doors

.Auto Door Locking/Unlocking . 81.....................Auto Door Locking . 81

.................Auto Door Unlocking . 83..............Locking and Unlocking . 80

......................Power Door Locks . 80

Index

C

D

II

CONTINUED

...................................Fan, Interior . 101...........................................Features . 99

....................Filling the Fuel Tank . 151Filters

.........................Dust and Pollen . 204...............................................Oil . 190

.............Flashers, Hazard Warning . 74...................Flat Tire, Changing a . 217

Fluids..........Automatic Transmission . 195

..........................................Brake . 196

..................Windshield Washer . 194FM Stereo Radio

...................................Reception . 139..........................Four-way Flashers . 74

..............................Front Airbags . 9, 21.................................................Fuel . 150

......................Fill Door and Cap . 151...........................................Gauge . 66

................Octane Requirement . 150...............................Oxygenated . 150

........................Reserve Indicator . 61........................Tank, Filling the . 151

.....................Fuses, Checking the . 231

...............Gas Mileage, Improving . 154..........................................Gasohol . 150.........................................Gasoline . 150

...............Fuel Reserve Indicator . 61...........................................Gauge . 66

................Octane Requirement . 150........................Tank, Filling the . 151

................Gas Station Procedures . 151

..........DOT Tire Quality Grading . 244...........Driver and Passenger Safety . 5

...........................................Driving . 163....................................Economy . 154

..................Dust and Pollen Filter . 204

..............................Economy, Fuel . 154............Emergencies on the Road . 215.............Battery, Jump Starting . 223...........Brake System Indicator . 230

................Changing a Flat Tire . 217.....Charging System Indicator . 228

..................Checking the Fuses . 231.....Low Oil Pressure Indicator . 227...Malfunction Indicator Lamp . 229

..................Overheated Engine . 225...........................Emergency Brake . 94

......................Emergency Flashers . 74......................Emergency Towing . 237

............Emergency Trunk Opener . 86.......................Emissions Controls . 247

.............Emissions Testing, State . 250Engine

....Coolant Temperature Gauge . 65

..............Engine Speed Limiter . 168Malfunction Indicator

................................Lamp . 62, 229........Oil Pressure Indicator . 62, 227..............Oil, What Kind to Use . 189

...............................Overheating . 225............................Specifications . 242

.......................................Starting . 165.Evaporative Emissions Controls . 247

...............................Exhaust Fumes . 52Expectant Mothers, Use of Seat

........................................Belts by . 16

Index

F

E

G

IND

EX

III

.................Jacking up the Vehicle . 217.......................................Jack, Tire . 217

................................Jump Starting . 223

..................................................Keys . 76

.......................Label, Certification . 240.................Lane Change, Signaling . 73

..................Lap/Shoulder Belts . 14, 18...........LATCH Anchorage System . 43

Lights....................Bulb Replacement . 197

.......................................Indicator . 60.........................................Parking . 73

..................................Turn Signal . 73....................................Load Limits . 159

......LOCK (Ignition Key Position) . 79

Gauges...Engine Coolant Temperature . 65

...............................................Fuel . 66Gearshift Lever Positions

..........Automatic Transmission . 166........................................Glove Box . 96

.............Halogen Headlight Bulbs . 197..............Hazard Warning Flashers . 74

Headlights........................................Aiming . 197

............Daytime Running Lights . 74..................High Beam Indicator . 60

........................Reminder Beeper . 73........Replacing Halogen Bulbs . 197

...................................Turning on . 73..............................Head Restraints . 91...............................Heated Mirrors . 94

.............High Altitude, Starting at . 165.................High-Low Beam Switch . 73

.......................Hood, Opening the . 152..................................................Horn . 71

...Identification Number, Vehicle . 240Ignition

..............................................Keys . 76...........................................Switch . 79

............Timing Control System . 248.........Important Safety Precautions . 6

.........Indicators, Instrument Panel . 57...............................Infant Restraint . 39

Infant Seats......LATCH Anchorage System . 43

...........................Lower Anchors . 43

...........................Tether Anchors . 47.....Inflation, Recommended Tire . 208

...................................Pressures . 208........................Information Display . 64

...................................Inside Mirror . 93.............................Inspection, Tire . 209

............................Instrument Panel . 57................Instrument Panel Lights . 58

........Instrument Panel Brightness . 74.................................Interior Lights . 97

........................................Introduction . i

Index

I

H

J

K

L

IV

CONTINUED

Locks.......Anti-theft Steering Column . 79

............................Fuel Fill Door . 151.................................Power Door . 80

...........................................Trunk . 86........................Low Coolant Level . 154.........................Low Fuel Indicator . 61

................................Lower Anchors . 43...Low Oil Pressure Indicator . 62, 227

...Lubricant Specifications Chart . 242

..................................Maintenance . 177........................................Minder . 179

.........................Minder Indicator . 61Owner’s Maintenance

...................................Checks . 184.................................Record . 186-187

..........................................Safety . 178.Malfunction Indicator Lamp . 62, 229

..........................Meters, Gauges .57, 64....................Methanol in Gasoline .150

..........................Mirrors, Adjusting . 93.....................................MP3/WMA .112

...................Neutral Gear Position . 168..................New Vehicle Break-in . 150

...................NOTICE, Explanation of . i...............Numbers, Identification . 240

...Octane Requirement, Gasoline . 150.........................................Odometer . 64

................................Odometer,Trip . 64Oil

........................Change, How to . 190......................Change, When to . 179......................Checking Engine . 152..............Pressure Indicator . 62, 227

.......Selecting Proper Viscosity . 189...........ON (Ignition Key Position) . 79

Onboard Refueling Vapor....................................Recovery . 247

..............................Outside Mirrors . 93....Outside Temperature Indicator . 67

....................Overheating, Engine . 225....Owner’s Maintenance Checks . 184

.........................Oxygenated Fuels . 150

..............Panel Brightness Control . 74........................Park Gear Position . 167

...........................................Parking . 172.................................Parking Brake . 94

Parking Brake and Brake.................System Indicator . 58, 230

.................................Parking Lights . 73..Parking Over Things that Burn . 172

.............................PGM-FI System . 248..........................Playing the Radio . 108

................................Playing a Disc . 112.........................Playing a PC Card . 129

.........Pregnancy, Using Seat Belts . 16

.........Protecting Adults and Teens . 11...Additional Safety Precautions . 17

.....Advice for Pregnant Women . 16........................Protecting Children . 34

.....................General Guidelines . 34...........................Protecting Infants . 39

.............Protecting Small Children . 40.....................Selecting a Child Seat . 41....................Installing a Child Seat . 42

Index

M

N

O

P

IND

EX

V

...........Protecting Larger Children . 48

...................Radiator Overheating . 225............Radio/CD/Sound System . 106

Radio/CD/PC Card Sound........................................System . 121

...................Readiness Codes . 229, 250Rear Lights, Bulb

......................Replacement . 200, 201............................Rear View Mirror . 93

.................Rear Window Defogger . 75................Reclining the Seat-backs . 90

.......................Remote Transmitter . 87Replacement Information

..............Dust and Pollen Filter . 204................Engine Oil and Filter . 190

..........................................Fuses . 232................................Light Bulbs . 197

................Maintenance Minder . 179...........................................Tires . 207

.............................Wiper Blades . 204Replacing Seat Belts After a

............................................Crash . 20

Reserve Tank, Engine...............................Coolant . 153, 192

...............................Restraint, Child . 34..................Reverse Gear Position . 168

................................Rotation, Tire . 210

..................................Safety Belts . 8, 18............Safety Defects, Reporting . 254

.................................Safety Features . 7...........................................Airbags . 9

.......................................Seat Belts . 8.............Safety Labels, Location of . 53

..............................Safety Messages . iii.....................................Seat Belts . 8, 18

...............Additional Information . 18Automatic Seat Belt

...............................Tensioners . 19................Lap/Shoulder Belt . 14, 18

........................Maintenance . 20, 203Reminder Light and

................................Beeper . 18, 58...................System Components . 18

...............Use During Pregnancy . 16

Wearing a Lap/Shoulder.....................................Belt . 14, 18

........................Seats, Adjusting the . 89............................Security System . 144

...............................Serial Number . 240...........................Service Intervals . 185

.............................Service Manual . 255.........Service Station Procedures . 151

..........................Setting the Clock . 119...Shift Lever Position Indicators . 166

........................Shift Lock Release . 169................................Side Airbags . 9, 28

..........................Off Indicator . 30, 59......................Side Curtain Airbags . 29

Side Marker Lights, Bulb..............................Replacement . 199...............................Signaling Turns . 73

.....................................Snow Tires . 211................................Sound System . 106

Spare Tire......................................Inflating . 216

............................Specifications . 243....................Specifications Charts . 242

................................Speed Control . 145Speed-Sensitive Volume

.......Compensation (SVC) . 111, 124

Index

R

S

VI

CONTINUED

.........................................Spotlights . 97..........SRS, Additional Information . 21

...Additional Safety Precautions . 32.............................Airbag Service . 32

How the Passenger Airbag Off......................Indicator Works . 31

How the Side Airbag Off......................Indicator Works . 30

..How the SRS Indicator Works . 30How Your Front Airbags

.........................................Work . 24...How Your Side Airbags Work . 28

How Your Side Curtain..........................Airbags Work . 29........................SRS Components . 21

.............................SRS Indicator . 30, 59....START (Ignition Key Position) . 79

..............State Emissions Testing . 250.......................Starting the Engine . 165

In Cold Weather at High..................................Altitude . 165

................With a Dead Battery . 223........Steam Coming from Engine . 225

Steering Wheel..................................Adjustment . 75

.............Anti-theft Column Lock . 79

...................Stereo Sound System . 106....................Storing Your Vehicle . 213

Supplemental Restraint..................................System . 9, 21......................................Servicing . 32

.........................SRS Indicator . 30, 59...................System Components . 21

.........................................SVC . 111, 124..................................Synthetic Oil . 190

Taillights, Changing..................................Bulbs . 200, 201

.Taking Care of the Unexpected . 215Technical Descriptions

......DOT Tire Quality Grading . 244.....Emissions Control Systems . 247

.....................Oxygenated Fuels . 150..........State Emissions Testing . 250

Three Way Catalytic...............................Converter . 249

.................................Tire Labeling . 246.......................Temperature Gauge . 65

..............Tether Anchorage Points . 47............................Theft Protection . 142

..Three Way Catalytic Converter . 249..........................Time, Setting the . 119

....................................Tire Chains . 211.........Tire, How to Change a Flat . 217

...........................Tire Information . 244...............................................Tires . 207

..............................Air Pressure . 208.........................Checking Wear . 209..........................Compact Spare . 216

......DOT Tire Quality Grading . 244......................................Inflation . 207

..................................Inspection . 209..............................Maintenance . 209

...................................Replacing . 210......................................Rotating . 210

...........................................Snow . 211............................Specifications . 243

................................Tire Chains . 211...................Tools, Tire Changing . 217

Towing.....................................A Trailer . 175

..................Emergency Towing . 237...........................Traction Devices . 211

Index

IND

EX

T

VII

Unexpected, Taking Care..........................................of the . 215

....Uniform Tire Quality Grading . 244........................Unleaded Gasoline . 150

.......Used Oil, How to Dispose of . 192

TransmissionChecking Fluid Level,

..............................Automatic . 195..................Fluid Selection . 195, 196

..............Identification Number . 241.............Shifting the Automatic . 166

.....................................Treadwear . 244

.......................................Trip Meter . 66................................................Trunk . 86

........................................Opening . 86...................Open Monitor Light . 60

....................................Turn Signals . 73

..................................Vanity Mirror . 95.................Vehicle Capacity Load . 159

......................Vehicle Dimensions . 242

....Vehicle Identification Number . 240.............................Vehicle Storage . 213

.....................................Ventilation . 103.................................................VIN . 240

..................................Viscosity, Oil . 189

............WARNING, Explanation of . iii.........Warning Labels, Location of . 53

....................Warranty Coverages . 253Washer, Windshield

........Checking the Fluid Level . 194.......................................Indicator . 61.....................................Operation . 72

Wheels...............Adjusting the Steering . 75............Alignment and Balance . 209

.....................................Cleaning . 207..........................Compact Spare . 216

...............................Nut Wrench . 217Windows

..................Operating the Power . 92...........................Rear, Defogger . 75

Windshield.......................................Cleaning . 72

...................................Defroster . 104.......................................Washers . 72

Wipers, Windshield.......................Changing Blades . 204

.....................................Operation . 72....................................Worn Tires . 207

.....Wrecker, Emergency Towing . 237

Index

V

W

U

VIII

Service Information Summary

Gasoline:

Fuel Tank Capacity:

Brake Fluid:

Tire Pressure (measured cold):Recommended Engine Oil:

Automatic Transmission Fluid(CVT):

32 psi (220 kPa , 2.2 kgf/cm )

60 psi (420 kPa , 4.2 kgf/cm )

Honda Heavy Duty Brake FluidDOT 3 preferred, or a DOT 3 orDOT 4 brake fluid as a temporaryreplacement (see page ).

Front/Rear:

Spare Tire:

Unleaded gasoline, pump octanenumber of 87 or higher.

)

API Premium grade 0W-20detergent oil (see page ).

Oil change capacity (includingfilter):

3.4 US qt (3.2 )

Use Honda CVT Fluid(Continuously VariableTransmission Fluid) only

3.0 US qt (2.8 )Capacity:

189

19612.3 US gal (46.6

2007 civic hybrid online reference owner's manual ... -...

Documents