2006/2007 section 9 body shop, collision and refinishing ... · 2006/2007 section 9 body shop,...

Body shop, collision and refinishing service eQUipMenT2006/2007 secTion 9

To order faX: 1.800.892.9651To order call: 1.800.368.6787 9-7

9-7

car-o-Tronic™ “vision” computerized electronic Measuring systemCar-O-Tronic “Vision” is the revolutionary computerized electronic measuring system that:• Provides upper and lower body measuring.• Provides damage and repair documentation.• Speeds the overall repair process. With Car-O-Tronic, your

technicians repair more vehicles to higher tolerances in less time.

• Robotic-type measuring probe eliminates the need for lengthy setup.

The all new software lets your Car-O-Tronic “Vision” System communicate via Blue Tooth with your PC. As a Windows® based system, it’s easy to learn and use and offers multiple screen options, including highly visible and instructional graphics.

features:• Provides a complete damage/repair report — useful to shop

managers, customers and insurance companies for verifying work needed and performed.

• Repair data is supplied on over 10,000 cars and light trucks. Data on new vehicles is supplied as soon as the vehicles are introduced.

• Car-O-Tronic’s articulating measuring arm communicates with the PC through a wireless Blue Tooth Technology.

• Car-O-Tronic is easy to learn and use.• Car-O-Tronic eliminates many computations left up to the

technician, so repairs are made faster and more accurately.

• Car-O-Tronic identifies the damaged areas of the vehicle and just as important, the undamaged areas.

• Car-O-Tronic is compatible with any existing Car-O-Liner collision repair system. It can also be used with virtually any competitive system with flat surfaces on which a Car-O-Liner measuring bridge can be placed.

• All vehicle measuring data is stored in your computer and can be called up into a variety of easy-to-follow graphic or numeric screen options. On-screen instructions help techni-cians operate the Car-O-Soft software.

• Upper body measuring is simple and accurate with the high measuring point adaptor.

• Car-O-Tronic provides three-dimensional, comparative or point-to-point measuring modes.

includes:• Measuring Slide (M90).• Transport Wagon (M81).• Radio Link.• Car-O-Soft Vision.• Measuring Bridge 4 m (M74).• Measuring Parts.• Battery Charger 110 volt.

options:CR1410950001 Monitor Cover (M82).CR1410800200 Measuring Bridge 5 m (M75).CR1411120000 Car-O-Tronic Bridge Support Stand (M802).

computer system Minimum requirements:• Pentium® IV processor• 256MB RAM• Windows® 98 (Second Edition)• 24MB graphics card• 12X CD/DVD drive• Soundcard for sound effects• Minimum 3GB hard drive• Desk jet printer• (1) active communication port

Measuring systeMsUpplied By: car-o-liner

Body shop, collision and refinishing service eQUipMenT 2006/2007 secTion 9

To order call: 1.800.368.6787To order faX: 1.800.892.9651 9-8

9-8

car-o-Tronic™ “classic” computerized electronic Measuring systemCar-O-Tronic “Classic” is the revolutionary computerized electronic measuring system that:• Provides upper and lower body measuring.• Provides damage and repair documentation.• Speeds the overall repair process. With Car-O-Tronic, your

technicians repair more vehicles to higher tolerances in less time.

• Robotic-type measuring probe eliminates the need for lengthy setup.

features:• Provides a complete damage/repair report — useful to shop

managers, customers and insurance companies for verifying work needed and performed.

• Repair data is supplied on over 10,000 cars and light trucks. Data on new vehicles is supplied as soon as the vehicles are introduced.

• Car-O-Tronic’s articulating measuring arm communicates with the PC through a wireless Blue Tooth technology.

• Car-O-Tronic is easy to learn and use.• Car-O-Tronic eliminates many computations left up to the

technician, so repairs are made faster and more accurately.

• Car-O-Tronic identifies the damaged areas of the vehicle and just as important, the undamaged areas.

• Car-O-Tronic is compatible with any existing Car-O-Liner collision repair system. It can also be used with virtually any competitive system with flat surfaces on which a Car-O-Liner measuring bridge can be placed.

• All vehicle measuring data is stored in your computer and can be called up into a variety of easy-to-follow graphic or numeric screen options. On-screen instructions help techni-cians operate the Car-O-Soft software.

• Upper body measuring is simple and accurate with the high measuring point adaptor.

• Car-O-Tronic provides three-dimensional, comparative or point-to-point measuring modes.

includes:• Measuring Slide.• Transport Wagon (M84).• Car-O-Soft Vision.• Measuring Bridge 4 m (M74).• Measuring Parts (M62).• Battery Charger 110 volt.

options:CR1410800200 Measuring Bridge 5 m (M75).CR1411120000 Car-O-Tronic Bridge Support Stand (M802).

computer system Minimum requirements:• Pentium® IV processor• 256MB RAM• Windows® 98 (Second Edition)• 24MB graphics card• 12X CD/DVD drive• Soundcard for sound effects• Minimum 3GB hard drive• Desk jet printer• (1) active communication port

Measuring systeMsUpplied By: car-o-liner

NEW FOR06



9-9

sUpplied By: car-o-linercar-o-Mech Mechanical Measuring systemCar-O-Liner’s high precision engineering sets the Car-O-Mech Mechanical Measuring System and accessories apart from the rest. Fast and easy to use, the system includes a measuring bridge, measuring slides and adaptors, together with a durable tool wagon for accessories. All measurements are made in close cooperation with vehicle manufacturers around the world. These exact measuring specifications help you increase pro-ductivity by eliminating uncertainties before, during and after repairs.

features:• Upper body measuring points are easy to reach with the

optional M900 upper body measuring system.• The universal M217 measuring adaptor is useful for those

hard to reach measuring points.• Car-O-Print 2000 software along with Car-O-Data allows you

to precisely target the correct measuring point.• Measuring tube and adaptor fit over bolt head in tight places.• Length, width and height can be easily read at a glance for

unsurpassed accuracy.• The portable tool cabinet and cart keep the measuring and

clamping components close at hand and well organized.

• Car-O-Mech lets you quickly measure dozens of points on the vehicle, saving time and legwork during repairs.

• Developed in cooperation with domestic and foreign vehicle manufacturers for use exclusively with Car-O-Liner equip-ment, Car-O-Liner’s data sheets provide technicians with up-to-date measurement information for unsurpassed accuracy. Data on new vehicles is supplied as soon as it is introduced.

includes:• Measuring Parts.• Measuring Bridge 4 m.• Tool Wagon.• Tube “B” L=20 mm.• Measuring Gauge.• Measuring Gauge.• Car-O-Print Data.

options:CR1330500007 Measuring Bridge 5 m.CR1330000200 Upper Body Measuring System.

Measuring systeM

Car-O-Mech Measuring System



9-10

sUpplied By: car-o-linerMark 6 series Bench systems Model no. crMarK61Designed with optimum user-friendliness, Car-O-Liner’s Mark 6 Series allows accurate repairs to be made faster than ever before. Optional packages include a base frame on wheels without measuring (Mark 6.1 Package), mounted onto a scis-sors lift with Car-O-Mech mechanical measuring (Mark 6.2 Package) or, mounted onto a scissors lift with Car-O-Tronic electronic measuring system (Mark 6.3 Package).

features:• For unmatched adaptability and efficient use of floor space,

the Mark 6.1 Mobile System can be moved from workstation to workstation or out of the way or can be mounted onto an in-ground or scissors lift.

• 10-ton Draw Aligner featuring nearly continuous adjustment with 11° between each setting — the Draw Aligner makes the correct angle easy to find. This increased adjustment capacity reduces the number of readjustments needed while pulling. In addition, Mark 6’s powerful Draw Aligner moves 360° around the system and has a built-in height extension for making higher pulls, faster.

• Finely milled steel frame provides a smooth, level surface for measuring equipment to rest on, resulting in to-the-millimeter accuracy.

• Optional side support system used to hold undamaged and already repaired components in place while pulling other areas. Also facilitates pushing, up pulls and down pulls.

• Standard Chassis Clamps and optional clamps hold vehicles securely even under the full 10-ton force of the Draw Aligner.

• The Mark 6 was specifically designed to provide more space between the machine’s surface and the vehicle to improve access to damaged parts, tools and measuring components.

• With the 6.2 and 6.3 Packages, a hydraulic lift allows the working height to vary up to a maximum of 54". Repairs are made faster and easier because the damaged area is easier to see and reach. In addition, by allowing the work to be performed in an upright position, the Mark 6 drive-on system reduces the back, knee and shoulder fatigue that can slow down the most skilled technician.

carMarK 6.1 Mobile system includes:• Base Frame.• Bench Parts.• Lock Wheels.• Draw Aligner.• Tire Stand.• Double Grab Hook.• 3/8" x 8' Chain.• Ram Adaptor.• 10-Ton Hydraulic Pump, Hose and Cylinder Set.

options:CR1311172422 Truck Repair Package.CR1310180000 Side Support.CRMARK62 Same as 6.1 but with T6 Scissors Lift

and Car-O-Mech Measuring System with 4 m Bridge.

CRMARK63 Same as 6.1 but with T6 Scissors Lift and Car-O-Tronic Computerized Electronic Measuring System.

CR1310118002 Car-O-Flex for Mark 6.CR1311800300 Ramp Kit.

Bench systeMs

Mark 6 Series Bench Systems



9-11

sUpplied By: car-o-linerBenchrack™ seriesModel no. crBr55001Whatever your current level of productivity, Car-O-Liner’s BenchRack Series can help you surpass it. BenchRack is a marvel of function and design, with innovative features that allow you to complete each phase of the collision repair process more quickly, more easily and more profitably.

features:• A revolutionary tilt feature scissors lift, available on all

BenchRack models, makes loading easier when approach space is limited.

• After loading, BenchRack’s lightweight drive-on ramps can be easily removed to provide optional access to the vehicle and damage.

• The working height is infinitely variable to suit the technicians height preference up to an industry leading 47-1/4" with a 9,200 lb. weight capacity.

• Fast-anchoring pillar jacks used to support vehicles dur-ing mounting, permit virtually any unibody or full frame car, pickup truck, sport utility or van to be clamped into place quickly and easily.

• Pull anywhere, 360° around the BenchRack with (2) power-ful, hydraulic Draw Aligners that exert up to 10 tons of pulling force.

• Finely milled steel frame with stringent tolerances result in a smooth, level surface that provide the to-the-millimeter ac-curacy Car-O-Liner is famous for.

• Diamond-shaped cam locks provide a timesaving fast bolt system for anchoring and pulling components to be attached at any point along the rails.

crBr55001 includes:• CRBR5500 5.5 m Frame with Tilt Lift.• Ramp Kit.• Power Unit.• Draw Aligners (2).• Ram Adaptors (2).• 10-Ton Hydraulic Pump, Hose and Cylinder Set (2).• Bench Parts.• Side Support Kit.• Tent Cart.• Pillar Jack Kit.• Double Grab Hook (2).• 3/8" x 8' Chain with (1) Grab Hook.

options:CRBR50001 Same as CRBR55001 with 5 m Frame.CRBR50002 Same as CRBR55001 with 5 m Frame and

Car-O-Mech Mechanical Measuring System with 5 m Bridge.

CRBR50003 Same as CRBR55001 with 5 m Frame and Car-O-Tronic Computerized Elec- tronic Measuring System with 5 m Bridge.

CRBR55002 Same as CRBR55001 with Car-O-Mech Mechanical Measuring System with 5 m Bridge.

CRBR55003 Same as CRBR55001 with Car-O-Tronic Computerized Electronic Measuring System with 5 m Bridge.

CRBR42001 Same as CRBR55001 with 4 m frame.CRBR42002 Same as CRBR55001 with 4 m frame and

Car-O-Mech Mechanical Measuring System with 4 m bridge.

CRBR42003 Same as CRBR55001 with 4 m frame and Car-O-Tronic Computerized Electronic Mea-suring System with 4m bridge.

CR1310118000 Car-O-Flex for Bench Rack.CR1330500222 Truck Repair Package.CRBR63001 Same as CRBR55001 with 6.3 m frame.CRBR63002 Same as CRBR55001 with 6.3 m frame

and Car-O-Mech Mechanical Measuring System with 6.3 m bridge.

CRBR63003 Same as CRBR55001 with 6.3 m frame and Car-O-Tronic Computerized Electronic

Measuring System with 6.3 m bridge.

racks



9-12

sUpplied By: car-o-linerspeed systemModel no. cr1380000030Car-O-Liner’s Speed System is a versatile lift platform that al-lows you to make efficient use of space in your shop, increase productivity and maximize capacity. Speed is ideal for a range of different tasks such as sheet metal work, assembly, disas-sembly, door adjustments, sanding, masking and other prepa-rations for painting. All this with added capacity of light pulls. Speed is easy to install and easy to use.

features:• The Draw Aligner with a capacity of 5 metric tons is infinitely

adjustable and self-locking, allowing you to easily set and lock the exact position required. It can be rotated within a large area so you can work more efficiently.

• Setup is fast and easy using Car-O-Liner’s easy-on/easy-off attachments.

• Unique bench arms are vertically adjustable, making it easy to install the chassis clamps.

• Vehicles can be easily driven over the platform due to Speed’s low profile of only 4".

CR1380000030

Lift PLatforM

• The lift frame has adjustable arms and the hydraulic lift is easily adjustable to the working height you prefer. Maxi-mum lifting height is 5' 2" and maximum lift capacity is 5,000 lbs.

includes:• Platform with Lift.• Draw Aligner.• Bench Arms (4).• Power Unit.• Chassis Clamps (4).• 5-Ton Hydraulic Pump, Hose and Cylinder Set.• 60 mm Height Extension.

options:CRSPEEDPLUS Same as CRI380000030 with front and

rear vehicle pulling capability.CR1380110320 Chain Holder.CR1381223000 Speed Check Deluxe.CR1381223002 Adaptor Set for Speed Check (2).CR1380385321 Side pull support.CR1380385330 Down pull.CR1381401320 Connection Kit.CR1311007013 Chain shortener.CR1380115311 Height adaptor.



9-32

cr500 spot WelderThe CR500 Spot Welder is designed for quality-minded body shops to provide quality spot welds with all new high strength steels and welding processes.

features:• Versatile multifunction gun.• Easy to use C gun.• Fully programmable PLC panel preset for best performance.• Two-sided spot welding.• Single-sided welding.• Molding clip rivet welding.• Stitch welding.• 230 and 460 volt available.• U.L. and E.T.L. listed.• Heavy-duty robust construction meant for years of continu-

ous use.• Factory training available with ICAR Gold Class Points

through the ICAR Training Alliance.• ASE/CASE certified training department.

Models:CR1390500310 230 volt spot welderCR1390500312 460 volt spot welder

sUpplied By: car-o-liner

sPot weLder

includes:• CR1390500310 230 volt or CR1390500312 460 volt spot

welder C gun.• Multifunction gun.• Electrode assortment.• 80 mm and 330 mm yokes.• Dent puller.

options:CR1390201204 Tool panel.CR1390210300 Cable support.CR1394025311 600 mm yoke.CR1394025310 Fender edge kit.CR1394001040 Electrode dresser.

CR500

NEW FOR06

2006/2007 section 9 body shop, collision and refinishing ... · 2006/2007 section 9 body shop,...

Documents