20 wildland and ground fires. 2 the wildland fire triangle 20
TRANSCRIPT
20
Wildland and Ground Fires
2
The Wildland Fire Triangle
20
3
Fuel• Subsurface – under the ground
• Surface – up to 6’ above the ground
• Aerial – more than 6’ above the ground
• Fine - Includes dried vegetation such as twigs, leaves, needles, grass, moss, light brush and
duff– Aids the ignition of heavier fuels
• Heavy - Includes large brush, heavy timber, stumps, branches, slash and dead timber on the
ground– Do not spread a fire as rapidly as fine fuels– Can burn with a high intensity
20
5
Other Fuel Characteristics
• Size and Shape• Compactness• Continuity• Volume/Quantity• Moisture Content
* Will determine rate of ignition, fire spread and intensity
20
6
Weather
• Moisture– Relative Humidity: Ratio of the amount of water vapor
present in the air compared to the maximum amount the air can hold at a given temperature (Varies with the time of day and year)
– Precipitation
• Wind• Air Temperature
20
“The 10am Concept”
7
Topography
• Slope• Aspect (N, E, S, W)• Valleys• Ridges• Canyons• Natural barriers eg. streams and lakes
• Manmade barriers eg. Highways
* May increase or impede fire behaviour, rate of spread
20
8
Anatomy of a Wildland Fire
20
9
Anatomy of a Wildland Fire (2)
• Pocket– A dangerous place for fire fighters because
it is an area of unburned fuel surrounded on three sides by fire
• Island – An unburned area surrounded by fire
20
10
Methods of Extinguishment
• Cooling the fuel• Removing the fuel • Smothering
20
11
Cooling a Wildland Fire
• Water is used to cool.– Backpack pump extinguishers– Portable pumps– Booster tanks from apparatus– Aircraft
20
12
Removing Fuel (1 of 2)
• Removal of fine fuels:– Fire broom– Steel fire rakes– McLeod fire tool
• Removal of heavier brush:– Adze– Pulaski axe – Hand saws, chainsaws– Tractors, plows, and bulldozers
20
13
Removing Fuel (2 of 2)
• Backfiring – When properly set can burn an area of
vegetation in front of the fire, thereby creating an area devoid of vegetation
20
14
Removing the Oxygen• Smothering
– Most commonly used when overhauling the last remnants of a wildland fire
– Earth is thrown on smoldering vegetation. – Not as useful during the more active phases of a fire
• Compressed air foam systems (CAFS)– Sticks to vegetation and structures in the fire’s path – When the heat of the fire reaches the foam, it absorbs the
heat and breaks down the foam. – This cools the fuel.
20
15
Types of Attacks
• Direct attack• Indirect attack
20
16
Direct Attacks
• Mounted by containing and extinguishing the fire at its burning edge
• Fire fighters might smother the fire with dirt, use hoses to apply water to cool the fire, or remove fuel.
• Dangerous to fire fighters because they must work in smoke and heat close to the fire
20
17
Indirect Attacks
• Most often used for large fires that are too dangerous to approach through a direct attack
• Mounted by building a fire line • Can be mounted using hand tools or by using
mechanized machinery • Most appropriate when the topography is so
rough that a direct attack is dangerous or impossible
20
18
Priorities of Attack
• IC must assess and evaluate the priorities for preserving lives and property before determining how to attack a wildland fire.
20
19
Safety in Wildland Firefighting
• Fighting wildland and ground fires is hazardous duty.
• Shares many of the hazards of structural firefighting plus additional hazards:– Driving, falls, smoke and fire, and falling
trees
20
20
Hazards of Wildland Firefighting (1 of 2)
• Driving in rough terrain– Risk of rollover
• Working in rough terrain– Risk of falls
• Burns and smoke inhalation– Wear PPE – Use SCBA in conditions where needed
20
21
• Falling trees– Trees of all sizes can fall with little warning.
• Electrical hazards– Wires that drop on vegetation may ignite. – Difficult to see at night and in smoky
conditions
20
Hazards of Wildland Firefighting (2 of 2)
22
Personal Protective Equipment
• One-piece jumpsuit, or a coat, shirt, and trousers – Meet the requirements of NFPA 1977– Garments should be constructed of a fire-resistant
material like Nomex®– Wear an approved helmet with a protective
shroud, eye protection, gloves, and protective footwear.
– Respiratory protection• Filter mask
20
23
Wildland Urban Interface
• The mixing of wildland with developed areas • Wildland fires regularly ignite buildings and
become structure fires. • Fires in this zone present a significant life
safety hazard. • Many areas do not have adequate municipal
water systems.
20
24
Fire Intensity Rankings
(courtesy BC Forest Service http://bcwildfire.ca/FightingWildfire/firerank.htm)
20
Rank 1Smouldering ground or
creeping surface fire
Rank 2Low vigor surface fire
Rank 3Moderately vigorous
surface fire, “candling”
Rank 4Highly vigorous
surface fire, torching (or passive crown fire)
Rank 5Extremely vigorous
surface fire, or active crown fire
Rank 6Blow up/Conflagration,
Extreme fire behaviour
25
The End
20