2. run. hours button 1. run. hours screen running hours
TRANSCRIPT
Running hours
Last time running hours are entered
Last number of running hours
Actual number of running hours (calculated!!!)
MARAD asks WEEKLY for the actual number of running hours
RED = overdue
YELLOW = you just changed but did not save yet
GREEN = OK
Add a device1. Press “Add”
2. Type text
3. Press <ENTER> (a pop-up appears)
4. Press <ENTER> or click “OK”
Add a device1. Press “Add”
2. Type text
3. Press <ENTER> (a pop-up appears)
4. Press <ENTER> or click “OK”
5. Type actual running hours and press <Save>
Add a device1. Press “Add”
2. Type text
3. Press <ENTER> (a pop-up appears)
4. Press <ENTER> or click “OK”
5. Type actual running hours and press <Save>
6. A check pop-up appears. If correct, press <ENTER> or click “YES”
Add a device1. Press “Add”
2. Type text
3. Press <ENTER> (a pop-up appears)
4. Press <ENTER> or click “OK”
5. Type actual running hours and press <Save>
6. A check pop-up appears. If correct, press <ENTER> or click “YES”
7. Device successfully added
Add a device
When an device is added in the hour screen it can be used in the maintenance module.
Maintenance points can now run on running hours.
When ‘’running hours’’ is selected the right device can be attached on the maintenance point.
See chapter ‘Maintenance’
Delete a device1. Be sure the device is not used anymore and not linked to any maintenance point.
2. Left- or Right-click at the device
Delete a device1. Be sure the device is not used anymore and not linked to any maintenance point.
2. Left- or Right-click at the device
3. Click at the red cross