2) multilevel tests (michael) likelihood ratios for results other than + or -

58
2) Multilevel Tests (Michael) Likelihood ratios for results other than “+” or “-”

Upload: sofia-maclean

Post on 26-Mar-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

2) Multilevel Tests (Michael)

Likelihood ratios for results other than “+” or “-”

Page 2: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Four Main Points1) Dichotomizing a multi-level test by

choosing a fixed cutpoint reduces the value of the test.

2) The ROC curve summarizes the ability of the test to differentiate between D+ and D- individuals.

3) LR(result) = P(result|D+)/P(result|D-) = slope of ROC curve.

(NOTE: Do not calculate an LR(+) or LR(-) for a multilevel test.)

4) Pre-Test Odds x LR(result) = Post-Test Odds

Page 3: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Septic ArthritisBacterial infection in a joint.

Page 4: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical ScenarioDoes this Adult Patient Have Septic Arthritis?

Page 5: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical ScenarioDoes this Adult Patient Have Septic Arthritis?

A 48-year-old woman … presents to the emergency department with a 2-day history of a red, swollen right knee that is painful to touch. She reports no prior knee swelling and no recent trauma or knee surgery …. [S]he is afebrile and has a right knee effusion. Her peripheral white blood cell (WBC) count is 11 000/µL and her erythrocyte sedimentation rate (ESR) is 55 mm/h. An arthrocentesis is performed, and the initial Gram stain is negative.

Margaretten, M. E., J. Kohlwes, et al. (2007). Jama 297(13): 1478-88.

You have the synovial white blood cell (WBC) count.

Page 6: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical ScenarioDoes this Adult Patient Have Septic Arthritis?

Assume pre-test probability of septic arthritis is 0.38.

How do you use the synovial WBC result to determine the likelihood of septic arthritis?

Margaretten, M. E., J. Kohlwes, et al. (2007). Jama 297(13): 1478-88.

Page 7: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Why Not Make It a Dichotomous Test?

Synovial Septic ArthritisWBC Count Yes No

>25,000 77% 27%

≤ 25,000 23% 73%

TOTAL* 100% 100%*Note that these could have come from a study where the patients with septic arthritis (D+ patients) were sampled separately from those without (D- patients).

Margaretten, M. E., J. Kohlwes, et al. (2007). Jama 297(13): 1478-88.

Page 8: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Why Not Make It a Dichotomous Test?

Sensitivity = 77%Specificity = 73%

LR(+) = 0.77/(1 - 0.73) = 2.9LR(-) = (1 - 0.77)/0.73 = 0.32

“+” = > 25,000/uL “-” = ≤ 25,000/uL

Page 9: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical ScenarioSynovial WBC = 48,000/mL

Pre-test prob: 0.38Pre-test odds: 0.38/0.62 = 0.61LR(+) = 2.9Post-Test Odds = Pre-Test Odds x

LR(+)= 0.61 x 2.9 = 1.75

Post-Test prob = 1.75/(1.75+1) = 0.64

Page 10: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical Scenario Synovial WBC = 128,000/mL

Pre-test prob: 0.38 Pre-test odds: 0.38/0.62 = 0.61LR = 2.9 (same as for WBC=48,000!)Post-Test Odds = Pre-Test Odds x

LR(+)= 0.61 x 2.9 = 1.75

Post-Test prob = 1.75/(1.75+1) = .64

Page 11: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Why Not Make It a Dichotomous Test?

Because you lose information. The risk associated with a synovial WBC=48,000 is equated with the risk associated with WBC=128,000.

Choosing a fixed cutpoint to dichotomize a multi-level or continuous test throws away information and reduces the value of the test.

Page 12: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Main Point 1: Avoid Making Multilevel Tests Dichotomous

Dichotomizing a multi-level or continuous test by choosing a fixed cutpoint reduces the value of the test

Page 13: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

WBC (/uL) Interval

% of Septic Arthritis

% of No Septic Arthritis

>100,000 29% 1%

50,001-100,000 33% 7%

25,001-50,000 15% 19%

0 - 25,000 23% 73%

TOTAL 100% 100%

Page 14: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

No Septic Arthritis

Septic Arthritis

Synovial Fluid WBC Count

Page 15: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Histogram Does not reflect prevalence of D+ (Dark D+

columns add to 100%, Open D- columns add to 100%)

Sensitivity and specificity depend on the cutpoint chosen to separate “positives” from “negatives”

The ROC curve is drawn by serially lowering the cutpoint from highest (most abnormal) to lowest (least abnormal).*

* Just said that choosing a fixed cutpoint reduces the value of the test. The key issues are 1) the ROC curve is for evaluating the test, not the patient, and 2) drawing the ROC curve requires varying the cutpoint, not choosing a fixed cutpoint.

Page 16: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

Negative Positive

Cutoff = ∞Sensitivity = 0%1 - Specificity = 0%

Page 17: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

Negative Positive

Cutoff = 100,000Sensitivity = 29%1 - Specificity = 1%

Page 18: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

Negative Positive

Cutoff = 50,000Sensitivity = 62%1 - Specificity = 8%

Page 19: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

Negative Positive

Cutoff = 25,000Sensitivity = 77%1 - Specificity = 27%

Page 20: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

Negative Positive

Cutoff = 0Sensitivity = 100%1 - Specificity = 100%

Page 21: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

WBC Count (x1000/uL)

Sensitivity

1 - Specificity

> ∞ 0% 0%

> 100 29% 1%

> 50 62% 8%

> 25 77% 27%

≥ 0 100% 100%

Margaretten, M. E., J. Kohlwes, et al. (2007). Jama 297(13): 1478-88.

Page 22: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

1 - Specificity

Sen

sitiv

ity

Cutoff > ∞

Cutoff > 100k

Cutoff > 50k

Cutoff > 25k

Cutoff ≥ 0

Page 23: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Test Discriminates Fairly Well Between D+ and D-

-40 -20 0 20 40 60Test Result

D-D+

Page 24: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Test Discriminates Well Between D+ and D-

0

0.2

0.4

0.6

0.8

1

0 0.2 0.4 0.6 0.8 1

1 - Specificity

Se

ns

itiv

ity

Page 25: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Test Discriminates Poorly Between D+ and D-

-40 -20 0 20 40 60Test Result

D-D+

Page 26: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Test Discriminates Poorly Between D+ and D-

0

0.2

0.4

0.6

0.8

1

0 0.2 0.4 0.6 0.8 1

1 - Specificity

Se

ns

itiv

ity

Page 27: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

1 - Specificity

Sen

sitiv

ity

Cutoff > ∞

Cutoff > 100k

Cutoff > 50k

Cutoff > 25k

Cutoff ≥ 0

Area Under Curve = 0.8114

Area Under ROC Curve

Page 28: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Area Under ROC Curve

Summary measure of test’s discriminatory ability

Probability that a randomly chosen D+ individual will have a more positive test result than a randomly chosen D- individual

Page 29: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Main Point 2ROC Curve Describes the Test,

Not the Patient

Describes the test’s ability to discriminate between D+ and D- individuals

Not particularly useful in interpreting a test result for a given patient

Page 30: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

ROC Curve Describes the Test, Not the Patient

Clinical Scenario

Synovial WBC count = 48,000

Synovial WBC count = 128,000

Page 31: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Synovial WBC count = 48,000

Page 32: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

1 - Specificity

Sen

sitiv

ity

Cutoff > ∞

Cutoff > 100k

Cutoff > 50k

Cutoff > 25k

Cutoff ≥ 0

Page 33: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Sensitivity, Specificity, LR(+), and LR(-) of the Synovial Fluid WBC Count for Septic

Arthritis at 3 Different Cutoffs

WBC (/uL)

Sensitivity

Specificity LR+ LR-

>100,000 29% 99% 29.0 0.7

>50,000 62% 92% 7.8 0.4

>25,000 77% 73% 2.9 0.3

Synovial WBC Count = 48,000/uL

Which LR should we use?

Page 34: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Sensitivity, Specificity, LR(+), and LR(-) of the Synovial Fluid WBC Count for Septic

Arthritis at 3 Different Cutoffs

WBC (/uL)

Sensitivity

Specificity LR+ LR-

>100,000 29% 99% 29.0 0.7

>50,000 62% 92% 7.8 0.4

>25,000 77% 73% 2.9 0.3

Synovial WBC Count = 48,000/uL

Which LR should we use? NONE of THESE!

Page 35: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Likelihood Ratios

LR(result) = P(result|D+)/P(result|D-)

P(Result) in patient WITH disease----------------------------------------------------P(Result) in patients WITHOUT disease

Page 36: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

WOWO

With Over WithOut

Page 37: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

0 - 25,000 >25,000-50,000

>50,000-100,000

>100,000

No Septic Arthritis

Septic Arthritis

Interval Likelihood RatiosThe ratio of the height of the D+ distribution to the height of the D- distribution

15%19%

LR = 15%/19% = 0.8

Page 38: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

1 - Specificity

Sen

sitiv

ity

> 50k

> 25k

15%

19%Slope = 15%/19% =0.8

Page 39: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Interval Likelihood RatioWBC (/uL) Interval

% of D+ % of D-

Interval LR

>100,000 29% 1% 29.0

50,001-100,000 33% 7% 4.7

25,001-50,000 15% 19% 0.8

0 - 25,000 23% 73% 0.3

Page 40: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Common Mistake

When given an “ROC Table,” it is tempting to calculate an LR(+) or LR(-) as if the test were “dichotomized” at a particular cutoff.

Example: LR(+,25,000) = 77%/27% = 2.9This is NOT the LR of a particular result

(e.g. WBC >25,000 and ≤ 50,000); it is the LR(+) if you divide “+” from “-” at 25,000.

Page 41: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

WBC (/uL)

Sensitivity

Specificity LR+ LR-

>100,000 29% 99% 29.0 0.7

>50,000 62% 92% 7.8 0.4

>25,000 77% 73% 2.9 0.3

Common Mistake

Page 42: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

1 - Specificity

Sen

sit

ivit

y

Slope = 77%/27% = 2.9

Slope = 0.8

27%

77%

> 25,000

Common Mistake

Page 43: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Common Mistake

From JAMA paper:“Her synovial WBC count of 48,000/µL

increases the probability from 38% to 64%.” (Used LR = 2.9)

Correct calculation:Her synovial WBC count of 48,000/µL

decreases the probability from 38% to 33%.” (Used LR = 0.8)

Page 44: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Main Point 3 Likelihood Ratio

P(Result) in patients WITH disease------------------------------------------------------P(Result) in patients WITHOUT disease

Slope of ROC Curve

Do not calculate an LR(+) or LR(-) for a multilevel test.

Page 45: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical ScenarioSynovial WBC = 48,000/uL*

Pre-test prob: 0.38Pre-test odds: 0.38/0.62 = 0.61LR(WBC btw 25,000 and 50,000) = 0.8Post-Test Odds = Pre-Test Odds x LR(48)

= 0.61 x 0.8 = 0.49Post-Test prob = 0.49/(0.49+1) = 0.33

*Can use slide rule, Excel, or web page

Page 46: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical ScenarioSynovial WBC = 128,000/uL*

Pre-test prob: 0.38Pre-test odds: 0.38/0.62 = 0.61LR(128,000/uL) = 29Post-Test Odds = Pre-Test Odds x

LR(128)= 0.61 x 29 = 17.8

Post-Test prob = 17.8/(17.8+1) = 0.95

*Can use slide rule, Excel, or web page

Page 47: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Clinical Scenario

WBC = 48,000/uL Post-Test Prob = 0.33WBC = 128,000/uL Post-Test Prob = 0.95

(Recall that dichotomizing the WBC with a fixed cutpoint of 25,000/uL meant that WBC = 48,000/uL would be treated the same as WBC = 128,000/uL and post-test prob = 0.64)

Page 48: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Main Point 4Bayes’s Rule

Pre-Test Odds x LR(result) = Post-Test Odds

What you knew before + What you learned = What you know now

Page 49: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Summary

1) Dichotomizing a multi-level test by choosing a fixed cutpoint reduces the value of the test.

2) The ROC curve summarizes the discriminatory ability of the test.

3) LR(result) = P(result|D+)/P(result|D-) = Slope of ROC Curve (NOTE: Do not calculate an LR(+) or LR(-) for a multilevel test.)

4) Pre-Test Odds x LR(result) = Post-Test Odds

Page 50: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Funny Times: 1-888-Funnytimes x 2111

Page 51: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

3) Getting the most out of ROC Curves (Tom)

THE WALKING MAN OR …

Page 52: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

… WHAT CAN YOU LEARN FROM ROC CURVES LIKE THESE?

Bonsu, B. K. and M. B. Harper (2003). "Utility of the peripheral blood white blood cell count for identifying sick young infants who need lumbar puncture." Ann Emerg Med 41(2): 206-14.

Page 53: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

“Walking Man” Approach to ROC Curves

Divide vertical axis into d steps, where d is the number of D+ individuals

Divide horizontal axis into n steps, where n is the number of D- individuals

Sort individuals from most to least abnormal test result

Moving from the first individual (with the most abnormal test result) to the last (with the least abnormal test result)…

Page 54: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

“Walking Man” (continued) …call out “D” if the individual is D+ and

“N” if the individual is D- Let the walking man know when you

reach a new value of the test The walking man takes a step up every

time he hears “D” and a step to the right every time he hears “N”

When you reach a new value of the test, he drops a stone.

Page 55: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

… WHAT CAN YOU LEARN FROM ROC CURVES LIKE THESE (Diagnosing meningitis in infants from WBC counts)?*

*Bonsu BK, Harper MB. Ann Emerg Med 2003;41:206-14

Page 56: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Calculating the c Statistic

C= (Smax – S)/(Smax – Smin) where Smin = d(d+1)/2 and Smax = Smin+dn

Actual values of the test are not important for the shape of the ROC curve or the area under it--only the ranking of the values

Area under an ROC (“C statistic”) curve uses the same information as the Wilcoxon Rank Sum (or Mann-Whitney U) and gives identical P values.

Page 57: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

Illustration: shorter stature as a test for female gender identification

Class arranges itself in order of height (shortest person at the head of the line)

Make a grid on flip chart, Y axis has F steps, X axis has M steps

Class draws ROC curve: F draw a vertical line segment M draw horizontal line segment Tied height: diagonal line segment

Page 58: 2) Multilevel Tests (Michael) Likelihood ratios for results other than + or -

10:35-10:45 Break10:45-12:30 Small

Groups12:30 Lunch