2 mrv - rv 7 mrvc - rvc 20 mrvp - rvp€¦ · 19 dimensioni mrv - rv f. mrv ... any position and...

1

DATI GENERALIGeneral data - Informations generales. 2

MOTORIDUTTORI E RIDUTTORI A VITE SENZA FINEWorm gearboxes - Réducteurs vis-sans-fin 7

2 Descrizione tecnica. Technical description. Précisions techniques. 2

3 Lubrificazione. Lubrication. Lubrification. 3

4 Guida alla selezione. Selection guide. Guide pour la sélection. 4

5 Informazioni per l’ordine Ordering information. Codification du produit 5

6 Rapporto effettivo e Reversibilità. Exact ratio and Reversibility. Rapport exact et Réversabilité. 6

7 Carichi assiali e radiali. Radial and axial shaft loads. Charges axiales et radiales. 7

8 Selezione MRV. MRV selection. MRV sélection. 8

11 Selezione RV. RV selection. RV sélection. 11

14 Posizioni di montaggio. Mounting Positions. Positions de montage. 14

15 Tappi. Oil plugs. Bouchons. 15

16 Dimensioni PAM. IEC dimensions. IEC dimensions. 16

17 Dimensioni MRV - RV FP. MRV-RV dimensions FP. Dimensions MRV - RV FP. 17

18 Dimensioni MRV - RV A/B/V. MRV - RV dimensions A/B/V. Dimensions MRV - RV A/B/V. 18

19 Dimensioni MRV - RV F. MRV - RV dimensions F. Dimensions MRV - RV F. 19

MOTORIDUTTORI E RIDUTTORI VITE SENZA FINE COMBINATICombined Worm gearboxes - Réducteurs vis-sans-fin combiné 20


21 Selezione MRVC. MRVC selection. MRVC sélection. 21

24 Selezione RVC. RVC selection. RVC sélection. 24


27 Dimensioni MRVC - RVC FP. MRVC-RVC dimensions FP. Dimensions MRVC - RVC FP. 27

28 Dimensioni MRVC - RVC A/B/V. MRVC - RVC dimensions A/B/V. Dimensions MRVC - RVC A/B/V. 28

29 Dimensioni MRVC - RVC F. MRVC - RVC dimensions F. Dimensions MRVC - RVC F. 29

MOTORIDUTTORI E RIDUTTORI VITE SENZA FINE CON PRECOPPIAHelical Worm gearboxes - Réducteurs v.s.f. avec precouple 30


31 Selezione MRVP. MRVP selection. MRVP sélection. 31

34 Selezione RVP. RVP selection. RVP sélection. 34


38 Dimensioni PAM. IEC dimensions. IEC dimensions. 38

39 Dimensioni MRVP - RVP FP. MRVP-RVP dimensions FP. Dimensions MRVP - RVP FP. 39

40 Dimensioni MRVP - RVP A/B/V. MRVP - RVP dimensions A/B/V. Dimensions MRVP - RVP A/B/V. 40

41 Dimensioni MRVP - RVP F. MRVP - RVP dimensions F. Dimensions MRVP - RVP F. 41

MRVP - RVP

MRVC - RVC

MRV - RV

ACCESSORIAccessories - Accessoires 42

42 Limitatore di coppia Torque limiter. Limiteur de couple. 42

45 Alberi lenti. Output shafts. Arbres de sortie. 45

45 Braccio di reazione Torque arm. Bras de réaction. 45

45 Vite sporgente. Double extended worm shaft. Arbre de la vis bilateral. 45

46 Altre flange di uscita Other output flanges Autres brides de sortie 46

47 Dimensioni motori. Electric motor dimensions. Dimensions moteurs. 47

48 Informazioni importanti. Important information. Informations importants. 48

Riduttori a Vite Senza Fine.Worm Gearboxes.

Réducteurs à vis-sans-fin.

INDICETABLE OF CONTENTSÏNDICE

2

I riduttori V.S.F. della serie MRV possono essere montati in qualsiasi posizione e ruotare nei due sensi. I motoriduttori V.S.F. si accoppiano con motori elettrici IEC. di qualsiasi marca. Il riduttore può essere fornito completo di motore in forma B5 o B14, o predisposto per attacco motore (PAM).I riduttori a Vite Senza Fine della serie MRV Modulare in alluminio coprono le grandezze da interasse 30 a interasse 80. Grazie alla modularità degli accessori come piedi e flange applicabili direttamente sui coperchi pendolari, questa serie garantisce il massimo della flessibilità con investimenti di magazzino molto contenuti.La serie MRV Pesante in ghisa è una delle pochissime del mercato a coprire anche taglie inferiori all’interasse 90. La fabbricazione in ghisa offre le migliori garanzie in termini di resistenza per le applicazioni più impegnative.

CASSALa cassa è in alluminio UNI 5076 per la serie modulare ed in ghisa G25 per la serie pesante (GS400 per la taglia 150), ad alta resistenza e perfetta tenuta stagna.

VITE SENZA FINE - CORONALa vite senza fine è costruita in acciaio 18NiCrMo4, temprata e rettificata. La corona elicoidale è costruita in lega speciale di bronzo su mozzo in ghisa.

ANELLI DI TENUTASpeciali organi di tenuta impediscono l’infiltrazione di acqua e polvere dall’esterno all’interno del riduttore ed impediscono al lubrificante di fuoriuscire. A richiesta possono essere forniti anelli in VITON per alte temperature.

CUSCINETTII cuscinetti forniti sulla vite sono a SFERE e ASSIALI per le grandezze fino al 63/7. Nei PAM maggiorati vengono utilizzate combinazioni SFERE e REGGI-SPINTA. Dalla taglia 63/7 con PAM maggiorato in poi vengono utilizzate coppie di cuscinetti conici. Sulle corone di tutte le grandezze vengono utilizzati cuscinetti a sfere sostituibili, su richiesta, con cuscinetti conici che aumentano i carichi di uscita assiali e radiali di circa 2,8 volte.

Worm gearboxes type MRV can be mounted in any position and rotate in both directions. The MRV series worm boxes can be coupled to IEC electric motors. The reducer can be supplied complete with motor in version B5 or B14 with standard IEC motor mounting flange.Aluminium Worm Gearboxes Modular MRV series cover sizes from 30 to 80. Thanks to modularity, accessories like feet or output flanges can be easy assembled directly to the cover. This series is the best in flexibility for a real cost effective stock investment.MRV Strong Series is one of the few series on the market which cover also sizes under 90. The cast iron casing offers the best performances in resistance on the most difficult applications.

CASINGThe casing, feet and flanges for modular series are made in high strength UNI 5076 aluminium. The casing, feet and flanges for strong series are made in G25 cast iron (GS400 cast iron for size 150).

WORM SHAFT - WORM WHEELThe worm is made on nickel-chromium-molybdenum steel alloy 18NiCrMo4 hardened and ground. The worm wheel is of a special bronze alloy on a cast iron hub.

SEALINGSpecial sealing components keep water and dust from entering the worm box inner parts, as well as preventing the lubricant leaking. VITON sealing for high-temperatures can be supplied on request.

BEARINGSOn the worm shaft ball bearings are used on sizes up to 63/7. For uprated IEC up to size 50/5 we use ball bearings combined with Thrust bearings. Starting from uprated IEC of size 63/7, both bearings supplied are taper bearings.On the worm wheel we usually use ball bearings. Taper roller bearings can be supplied to obtain output shaft loads 2,8 times bigger than standards.

Les motoréducteurs à roue et vis sans fin série MRV peuvent être montés dans n’importe quelle position et tourner dans les deux sens de rotation.Ils peuvent être accouplés directement aux moteurs électriques série IEC. le réducteur peut être fourni avec un moteur à bride B5 ou B14 standard IEC. Les réducteurs à vis-sans-fin série MRV Modulaire en aluminium sont produits de la taille 30 à la taille 80. Grâce à leur modularité, des accessoires comme les brides, les pattes de fixation peuvent être montés directement sur le carter du réducteur. Cette série offre la milleure flexibilité pour un minimum d’investissement.La série forte MRV en fonte est une des rares série éxistante sur le marché, qui est proposé pour des tailles en dessous de la grandeur 90. Le carter en fonte offre de meilleures performances ainsi qu’ une meilleure résistance dans les cas d’ applications les plus difficiles.

CARTERLe catrer est en aluminium UNI 5076 pour série modulaire et en fonte G25 pour la série forte en fonte (GS400 pour la taille 150), étanche.

VIS SANS FIN - ROUE HELICOHIDALELa vis sans fin hélicoîdale est en acier 18NiCrMo4, cémenté trempé et rectifiée. La roue hélicoîdale est en alliage spécial de bronze centrifugé sur un moyeu en fonte sphéroîdale.

ETANCHEITEL’étanchéité empêche toute infiltration d’eau et de poussière à l’interieur du réducteur, ainsi que toute fuite d’huile du réducteur dans le moteur électrique. Etanchéité en VITON pouvent être fournis sur demande.

ROULEMENTSSur la Vis-s-fin nous montons en standard des Roulements à billes, jusqu’à la taille: 63/7 et jusqu’à la taille 50/5 pour l’ IEC Majoré. Nous utilisons des Roulements à billes à contact oblique pour l’ IEC majoré à partir de la taille: 63/7. Les deux combinés se comportent comme des Roulements à rouleaux.Sur la Roue, nous montons habituellement des Roulements à billes. Nous pouvons également monter des Roulements à Rouleaux conique, avec lesquels nous obtenons une charge 2,8 fois supérieure à celle de Roulements à billes.

Descrizione tecnica. Technical description. Précisions techniques.



GUIDA ALLA SELEZIONESELECTION GUIDEGUIDE POUR LA SELECTION

Quantità olio (Litri) / Oil quantity (Litres)

MRV B3 B6-B7 B8 V5-V6

30 0.06 0.09

40 - 4 0.12 0.18

50 - 5 0.27 0.41

61 - 63 - 7 0.60 0.9

80 - 8 0.88 1.32

90 * 1.60 2.40

100 * 2.42 3.63

125 * 2.90 4.35

150 * 3.90 5.85

La nostra azienda consiglia la lubrificazione con olio sintetico Long-Life. Su richiesta del cliente possono essere forniti riduttori con con grasso sintetico Long-Life. Si ricorda che è molto importante specificare la posizione di lavoro in fase di ordine.

Our company recommends the use of long life synthetic oil. On request, the gearbox reducers can be supplied with long life synthetic grease. Please remember that is very important to specify the mounting position when ordering operations.

Notre société conseille d’utiliser de l’huile synthétique à vie (LONG LIFE). Sur demande, les réducteurs peuvent être livrès lubrifiés à la graisse.Nous vous prions de spécifier la position de montage dans la commande.

Lubrificazione. Lubrication. Lubrification.

* I riduttori dalla taglia 90 sono forniti privi di olio.

* Reducers from size 90 are delivered without oil.

* Réducteurs de la taille 90 sont livrés sans huille.

Olio sinteticoSynthetic Oil

Huile Synthetique

Olio sintetico per alimentiSynthetic oil for foodHuile pour aliment

Olio mineraleMineral oil

Huile minérale

ISO VG 460 200-320 150 32 320 150 32 680 460 320 220

Temperatura ambienteAmbient temperatureTempérature ambiante

-20° / 40° -20° / 50° -25° / 40° -35° / 15° -20° / 50° -25° / 40° -35° / 15° 5° / 50° 5° / 45° 0° / 40° 0° - 35°

Forn

itor

e /

Man

ufac

ture

r Fa

bric

ante AGIP Telium

VSF320Telium VSF150

DICREASX32

Foodlube 320

Foodlube 150

Rocol foodlube Hi Power 32

Blasia 680 Blasia 460 Blasia 320 Blasia 220

BP EnergolSGXP 460

EnergolSGXP 220

EnergolSGXP 150

Energol GRXP 680

Energol GRXP 460

Energol GRXP 320

Energol GRXP 220

ESSO SpartanEP 680

SpartanEP 460

SpartanEP 320

SpartanEP 220

SHELL Tivela OIL SD

Tivela OIL WB

Omala OIL 680

Omala OIL 460

Omala OIL 320

Omala OIL 220

KLÜBER Syntheso D460 EP

SynthesoS220 EP

Syntheso D150 EP Lamora 680 Lamora 460 Lamora 320 Lamora 220

MOBIL Glygoyle HE460 Glygoyle 30 Glygoyle 22 Mobilgear

636Mobilgear

636Mobilgear

632Mobilgear

630

Lubrificanti consigliati. Suggested lubricants. Lubrifiants indiqués.

Grasso sinteticoSynthetic grease

Graisse synthétique

Temperatura ambienteAmbient temperatureTempérature ambiante

-20 ° / 50°

Fornitore / Manufacturer / Fabricante AGIP BP ESSO SHELL KLÜBER MOBIL

GR SLL 00 Engrease GSF Grease S 420

TivelaCompound A

Glygoyle Grease 00

3




1. Fattore di Servizio. 1. Service factor. 1. Facteur de service.

Per una corretta selezione del riduttore o del motoriduttore è molto importante rispettare le seguenti indicazioni:

For a proper selection of the required gearbox it is very important to follow the following instructions:

Pour une sélection correcte du réducteur ou du motoréducteur il est important de respecter les indications suivantes:

Determinare tramite la seguente tabella il fattore di servizio Fs relativo all’applicazione.

Find out the application service factor Fs through the following table.

Déterminer au moyen du tableau suivant le facteur de service Fs correspondant à l’application.

Fs

Tipo di carico e avviamenti per oraType of load and starts per hour

Type de charge et type de functionnement par heure

Ore di funz. giorn. Oper. Hours per day

Opérations par heure

3 h 10 h 24 h

Applicazione continua o intermittente con n.ro avviamenti per ora ≤ 10 Continuous or intermittent application with start/hour ≤ 10 Service continu ou intermittent avec demarrage/heure ≤ 10

≤ 10

Uniforme / Uniform / Normal 0.8 1 1.25

Moderato / Moderate / Légère 1 1.25 1.5

Forte / Heavy / Forte 1.25 1.5 1.75

Applicazione intermittente con n.ro avviamenti per ora > 10 Intermittent application with start/hour > 10 Service intermittent avec demarrage/heure > 10

> 10

Uniforme / Uniform / Normal 1 1.25 1.5

Moderato / Moderate / Légère 1.25 1.5 1.75

Forte / Heavy / Forte 1.5 1.75 2.15

N.B.: Per azionamenti con motore a scoppio, autofrenante o per funzionamento alternato istantaneo moltiplicare il valore del coefficiente di servizio per 1.15.

N.B.: For applications with flameproof motors, brake motors or instantaneous reversal, multiply the service coefficient by 1.15.

N.B.: Pour des actionnements avec moteur à explosion, moteur frein ou pour un fonctionnement alteré instantané, multiplier la valeur du coefficient de service par 1.15.

2. Selezione del riduttore. 2. Gearbox selection. 2. Choix d’un réducteur.

Un riduttore deve essere selezionato utilizzando le apposite tabelle di selezione:

Per i riduttori MRV (predisposti per attacco motore) selezionare il modello in base alla potenza del motore che si intende applicare e al numero di giri (o rapporto di riduzione) facendo attenzione al fattore di servizio calcolato. Per i riduttori RV (con albero di entrata) ricercare il riduttore nelle apposite tabelle utilizzando come parametri di ricerca la potenza Kw1, la coppia richiesta M2 e i giri in uscita n2 o il rapporto di riduzione.

A gearbox should be selected using the selection tables:

For MRV gearboxes (with IEC motor input) select the unit based on the input motor power and the output speed (or reduction ratio) paying attention to the service factor calculated. For RV gearboxes (with solid input shaft) select the unit on the RV tables using the input power Kw1, the output requested torque M2 and the output speed n2 or the reduction ratio i.

Un réducteur devra être recherché dans les tableaux de sélection:

Pour la configuration MRV (predisposé pour le moteur sur l’entrée) recerché le réducteur sur la base de la puissance du moteur et la vitesse de sortie (ou du raport de réduction) depuis la vérification du facteur de service calculé. Pour la configuration RV (avec l’arbre d’entrée) rechercher le réducteur sur la table RV sur la base de la puissance du moteur Kw1, la couple de sortie desiré M2 et la vitesse de sortie n2 ou le raport de reduction i.

3. Note. 3. Notes. 3. Note.

Nella scelta del riduttore occorre tenere nella giusta considerazione i seguenti fattori e, all’occorrenza, chiedere la consulenza del Ns. Ufficio Tecnico:

Utilizzo di servizi che potrebbero risultare pericolosi per l’uomo in caso di rottura del riduttore;Applicazioni con inerzie particolarmente elevate;Utilizzo come organo di sollevamento;Utilizzo in ambiente con temperature < 5 °C e > 40 °C;Utilizzo in ambiente con agenti chimici aggressivi;Applicazioni con elevate sollecitazioni dinamiche sulla cassa del riduttore;Utilizzo in ambiente salmastro;Posizioni di utilizzo diverse da quelle a catalogo;Utilizzo in ambienti radioattivi o con pressione diversa da quella atmosferica.

When considering the following application please contact our technical service:

Dangerous applications in case of gearbox breakage;Particularly high inertia applications;Lifting devices;Particular environment conditions with temperatures < 5 °C and > 40 °C;Highly chemical aggressive environment;High dynamic stress on the gearbox housing;Salty environment;Applications not considered in the catalogue;Radioactive environment or pressure different to atmospheric.

Il faut considérer attentivement les applications suivantes par la consultation de notre service technique:

Utilization pour des services dangereux pour l’homme en case de casse du réducteur;Applications avec des inerties particulièrement élevées;Applications comme organe de levage;Utilization avec une temperatures < 5 °C et > 40 °C;Utilization en ambiance avec présence d’agents chimiques ou ambiance saumâtres;Applications avec des sollicitations dynamiques sur le carter du réducteur;UtilizationsPositions de montage non prévues dans le catalogue;Utilization en ambiance radioactive ou avec une pression différente que celle atmosphérique.

4




Informazioni per l’ordine. Ordering information. Codification du produit.

Tipologia riduttoreReducer’s type

Type du réducteur

1° Stadio1st Stage1ere Etage

GrandezzaSize

Taille

RapportoRatio

Rapport

VersioneVersionVersion

Posizione di montaggioMounting position

Position de montage

P.A.M.*I.E.C.*I.E.C.*

Accessori / OpzioniAccessories / Options

Accessoires / Optionals

MRV [...] 63 60 F [...] B3 80 B14 [AS...] [...] [...]

MRV

RV

MRVP

RVP

MRVC

RVC

MRVC RVC

30

40

50

63

80

90

Alluminio Alluminium Aluminium

30

40

50

61

63

80

Ghisa Cast Iron Fonte

4

5

7

8

90

110

130

150

Vedi

dat

i tec

nici

See

tech

nica

l dat

a ta

ble

Voir

le t

able

aux

tech

niqu

es

PiediFeetPattes

A

A1

B

V

B3

B6

B7

B8

V5

V6

MRVCRVC

1

2

3

4

5

6

56

63

71

80

90

100

112

132

B5

B14

ASS ASD

Albero sprogente semplice (vedi pag. 45) Single output shaft (see page 45)Arbre de sortie simple (voir page 45)

ABAlbero uscita bisporgenteDouble output shaftArbre double sortie

BRBraccio di reazioneTorque armBras de réaction

D...Diametro cavo uscitaOutput bore diameterDiamètre de sortie

VSVite sporgenteExtended worm shaftVis travarsante

RALVerniciaturaPaintingPeinture

DFEDiametro flangia entrataInput flange diameterDiameter bride d’entrée

MSSMSD

Limitatore di coppia (vedi pag 44)Torque limiter (see page 44)Limiteur de couple (voir page 44)

LSLeva sblocco limitatoreDisengage lever on torque limiterLevier de désengagement pour limiteur

CCCuscinetti conici su coronaTape roller bearings on worm wheelRoulments coniques sur la roue

HSElica a sinistraLeft hand threaded input shaft and w.Helice a gauche

LULubrificante specialeSpecial lubricationLubrification special

FlangiaFlangeBride

LatoSide Côté

F

F1

F2

F3

F4

S

D

2

StandardStandardStandard

FP

* Non specificare nelle versioni RV / Do not specify for RV / Ne pas specifier pour les RV[...] Dato opzionale / Optional information / Information optional

Potenza KwKw Power

Puissance en Kw

PoliPolesPoles

FasiPhasePhase

FormaFrameForme

FrenoBrakeFrein

Posizione morsettieraTerminal box position

Position boîte a bornes

Protezione Enclosure Protection

006 4 3 B5 [...] [...] [1] [A] [IP55]009 (0.09) 2 1 B14 AF AC 1 A IP...

018 (0.18) 4 B3 DC 2 B

025 (0.25) 6 B3B14 3 C

037 (0.37) 8 B3B5 4 D

055 (0.55)

075 (0.75) Default Default Default

110 (1.1) 1 A IP55

...

[...] Dato opzionale / Optional information / Information optional

Codifica motori elettrici. Electrical motors ordering. Codification des moteurs.

5

Simbologia tabelle. Tables symbols. Symboles dans les tableaux.

n2 [min-1] Giri in uscita

i --- Rapporto di riduzione

kW1 kW Potenza applicata in entrata

M2max Nm Coppia massima in uscita

M2 Nm Coppia trasmessa in uscita

η % Rendimento dinamico

Fs --- Fattore di Servizio

n2 [min-1] Output speed

i --- Reduction ratio

kW1 kW Input power

M2max Nm Maximum output torque

M2 Nm Output torque

η % Dynamic efficiency

Fs --- Service factor

n2 [min-1] Vitesse de sortie

i --- Raport de réduction

kW1 kW Puissance à l’entrée

M2max Nm Couple maximum de sortie

M2 Nm Couple de sortie

η % Rendment dinamique

Fs --- Facteur de service




Rapporto Effettivo. Exact ratio. Rapport exact.

i 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1

SIZERapporto Effettivo

Angolo ElicaModulo normale m

Exact RatioHelix AngleModule m

Rapport ExactAngle d’Helice

Module m

30

28/4 30/3 30/2 40/2 50/2 60/2 80/2 100/2 60/1 70/1 80/1 100/1

25°34’ 18°31’ 16°54’ 12°50’ 13°28’ 8°38’ 6°30’ 5°12’ 4°20’ 2°03’ 3°16’ 2°36’

1.488 1.46 1.569 1.199 1 0.81 0.611 0.489 0.817 0.611 0.614 0.491

40

28/4 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

25°34’ 18°31’ 12°20’ 12°50’ 7°35’ 5°45’ 5°49’ 6°45’ 4°20’ 2°04’ 3°16’ 2°36’

1.984 1.946 1.988 1.599 2.433 1.998 1.599 1.35 1.089 0.814 0.818 0.655

50

28/4 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

25°34’ 18°31’ 16°54’ 12°50’ 7°45’ 6°18’ 6°30’ 5°08’ 4°20’ 2°37’ 3°16 2°36’

2.48 2.433 2.615 1.998 3.065 2.542 2.037 1.629 1.362 1.089 1.023 0.819

61 - 63

28/4 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

25°34’ 18°31’ 16°54’ 12°50’ 8°05’ 6°42’ 6°12’ 4°55’ 4°20’ 2°30’ 3°16’ 2°36’

3.125 3.065 3.295 2.518 3.893 3.25 2.545 2.037 1.717 1.362 1.288 1.031

80

28/4 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

25°25’ 18°31’ 16°54’ 12°50’ 7°30’ 5°50’ 6°24 4°31’ 4°20’ 5°55’ 3°16 2°36’

3.968 3.893 4.184 3.198 4.86 4 3.25 2.545 2.179 1.998 1.637 1.311

90

28/4 30/3 30/2 40/2 50/2 30/1 40/1 50/1 60/1 70/1 80/1 100/1

18°05’ 18°31’ 12°27’ 9°21’ 13°28’ 5°50’ 4°31’ 5°55’ 5°07’ 4°20’ 2°31’ 2°45’

4.25 4 4.5 3.406 3 4.5 3.406 3 2.518 2.179 1.75 1.488

100

28/4 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

25°34’ 18°31’ 16°54’ 12°50’ 7°30’ 5°50’ 5°52’ 6°27’ 4°20’ 6°21’ 3°16’ 2°36’

4.96 4.86 5.229 3.997 6.083 5 4 3.377 2.725 2.518 2.046 1.638

125

28/4 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

25°34’ 18°31’ 16°54’ 12°50’ 7°05’ 6°58’ 5°52’ 4°39’ 4°20’ 2°39’ 3°16’ 2°36’

6.201 6.083 6.537 4.997 7.5 6.5 5 4 3.406 2.725 2.557 2.047

150

- 30/3 30/2 40/2 25/1 30/1 40/1 50/1 60/1 70/1 80/1 100/1

- 14°41’ 12°27’ 12°50’ 13°30’ 7°58’ 5°52’ 5°54’ 5°34’ 3°11’ 4°46’ 3°20’

- 7 7.5 6 5 8 6 5 4.25 3.406 3.25 2.577

Angolo elicaHelix angle

Angle d’héliceReversibilità / Irreversibilità Reversibility / Irreversibility Réversabilité / Irréversabilité

> 25° Reversibilità totale. Total reversibility. Réversabilité totale.

12° - 25°Staticamente reversibile.Reversibile.Dinamicamente reversibile.

Statically reversible.Reversible.Dynamically reversible.

Statiquement réversible.Retour rapide.Dynamiquement réversible.

8° - 12°Irreversibilità statica incerta.Ritorno rapido in caso di vibrazioni.Dinamicamente reversibile.

Static irreversibility doubtful.Fast reverse in case of vibration.Dynamically reversible.

Irréversibilité statique incertaine.Retour rapide en cas de vibrationsDynamiquement réversible.

5° - 8°Statisticamente irreversibile.Ritorno in caso di vibrazioni.Reversibilità dinamica scarsa.

Statically irreversible.Reverse in case of vibration.Poor dynamic reversibility.

Statiquement irréversible.Retour en cas de vibrations.Mauvaise réversabilité dynamiquement.

3° - 5°Staticamente irreversibile.Bassa reversibilità in caso di vibrazioni.Reversibilità dinamica quasi nulla.

Statically irreversible.Slow reverse in case of vibration.Dynamic reversibility virtually nil.

Statiquement irréversible.Retour par coups lents en cas de vibration.Réversabilité dynamique presque nulle.

1° - 3°Staticamente irreversibile.Nessun ritorno in caso di vibrazioni.Reversibilità dinamica quasi nulla.

Statically irreversible.No reverse in case of vibration.Dynamic reversibility virtually nil.

Statiquement irréversible.Aucun retour en cas de vibration.Réversabilité dynamique presque nulle.

Il prospetto di cui sopra propone una analisi indicativa dei vari gradi di reversibilità o irreversibilità in funzione dell’angolo di elica.

The above is an indication of the degree of reversibility/irreversibility depending on the helix angle.

Le tableau ci dessus est une indication du degré de réversabilité ou d’irréversibilité dépendant de l’angle d’hélice.

6

ATTENZIONE: L’irreversibilità totale non può essere garantita, pertanto dovrà essere predisposto un sistema di frenatura esterno.

WARNING: The total irreversibility cannot be guaranteed, therefore, where it is required, it is recomended to arrange an external braking device.

ATTENTION: L’irréversibilité totale ne peut pas être garantie, par conséquent là où elle est demandée il est nécessaire de prédisposer un systéme de freinage externe au réducteur.




Carichi sugli alberi. Shaft loads. Charges admissibles sur les arbres.

n1=1400 (NEWTONS)

SIZEi 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1

n2 200 140 94 70 56 47 35 28 23 20 18 14

30

FR 760 800 860 950 1000 1000 1080 1150 1150 1400 1400 1600

FA 190 200 215 237 250 250 270 287 287 350 350 400

Fr 65 65 65 65 65 65 65 65 65 65 65 65

Fa 20 20 20 20 20 20 20 20 20 20 20 20

40 - 4

FR 900 1100 1200 1450 1600 1600 1750 1800 1800 2100 2100 2300

FA 225 275 300 362 400 400 437 450 450 525 525 575

Fr 360 360 360 360 360 360 360 360 360 360 360 360

Fa 90 90 90 90 90 90 90 90 90 90 90 90

50 - 5

FR 1350 1650 1830 1950 2260 2260 2400 2600 2600 2900 2900 3350

FA 337 412 457 487 565 565 600 650 650 725 725 837

Fr 460 460 460 460 460 460 460 460 460 460 460 460

Fa 115 115 115 115 115 115 115 115 115 115 115 115

61 - 63 - 7

FR 1890 2500 2960 3250 3620 3620 3920 4160 4160 4500 4500 4700

FA 472 625 740 812 905 905 980 1040 1040 1125 1125 1175

Fr 560 560 560 560 560 560 560 560 560 560 560 560

Fa 140 140 140 140 140 140 140 140 140 140 140 140

80 - 8

FR 2100 2650 2780 2820 3760 3760 3970 4890 4890 5550 5550 5800

FA 525 662 695 705 940 940 992 1222 1222 1387 1387 1450

Fr 700 700 700 700 700 700 700 700 700 700 700 700

Fa 175 175 175 175 175 175 175 175 175 175 175 175

90

FR 2500 2950 3250 3290 4390 4630 5710 6410 6410 6410 6770 6770

FA 625 738 813 823 1098 1158 1428 1603 1603 1603 1693 1693

Fr 800 800 800 800 800 800 800 800 800 800 800 800

Fa 200 200 200 200 200 200 200 200 200 200 200 200

100

FR 3050 3150 3700 4240 4970 5880 6360 7220 7220 7220 8270 8270

FA 763 788 925 1060 1243 1470 1590 1805 1805 1805 2068 2068

Fr 900 900 900 900 900 900 900 900 900 900 900 900

Fa 225 225 225 225 225 225 225 225 225 225 225 225

125

FR 4900 5050 5600 5930 6850 7900 8800 10100 10100 10100 11600 11600

FA 1225 1263 1400 1483 1713 1975 2200 2525 2525 2525 2900 2900

Fr 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200

Fa 300 300 300 300 300 300 300 300 300 300 300 300

150

FR 7200 7800 8000 8850 9900 11060 12100 13200 13200 13200 16800 16800

FA 1800 1950 2000 2213 2475 2765 3025 3300 3300 3300 4200 4200

Fr 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400

Fa 350 350 350 350 350 350 350 350 350 350 350 350

7

I valori suindicati possono essere maggiorati di 2,8 volte in caso di utilizzo di cuscinetti conici.

Values can be increased 2,8 times if using of tape roller bearings.

Des valeurs peuvent être augmentées 2.8 fois si employer des roulements coniques.


Réducteurs vis-sans-fin.

MRV - RV

Giri Uscita rpm (n2)Momento Torcente Nm (M2)

Fattore di Servizio (Fs)

Output Speed rpm (n2)Output Torque Nm (M2)

Service Factor (Fs)

Vitesse de Sortie rpm (n2)Couple de Sortie Nm (M2)Facteur de Service (Fs)

Kw1 TYPE 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1 Kg FP

0.06 MRV 302002.67.3

1403.65.5

935.34.0

706.83.1

568.52.5

479.31.8

3511.61.4

2813.51.0

2315.51.0

2014.60.8

1817.50.7

1420.50.6

3.7

0.09 MRV 302003.94.9

1405.53.7

938.02.6

7010.22.1

5612.71.7

4713.91.2

3517.40.9

2820.30.7

2323.20.7

2021.90.6

1826.30.5

1430.70.4

3.9

0.12 MRV 302005.23.6

1407.292.8

9310.62.0

7013.61.6

5617.01.2

4718.50.9

3523.30.7

2827.00.5

4.7

0.18

MRV 302007.82.4

14010.91.8

9315.91.3

7020.41.0

5625.50.8

4727.80.6

3534.90.5

2840.50.4

5.6

MRV 40MRV 4

2007.95.8

14010.94.8

9315.53.4

7020.62.3

5623.62.5

4726.32.2

3534.91.4

2844.21.1

2347.80.8

2046.40.7

1854.40.6

1463.90.5

6.810

MRV 50MRV 5

3536.32.4

2842.41.8

2349.31.4

2048.11.3

1856.41.1

1466.30.8

8.917

0.25

MRV 40MRV 4

20011.04.2

14015.23.4

9321.62.4

7028.71.6

5632.81.8

4736.61.6

3548.41.0

7.910.3

MRV 50MRV 5

20011.06.1

14015.44.7

9322.63.4

7029.02.9

5633.32.9

4738.12.5

3550.51.7

2858.81.3

2368.51.0

2066.90.9

1878.30.8

1492.10.6

10.014.2

MRV 61MRV 63MRV 7

3551.23.2

2859.72.4

2370.61.9

2069.21.7

1880.91.4

1495.61.1

13.313.320

0.37

MRV 40MRV 4

20016.32.8

14022.52.3

9331.91.6

7042.41.1

5648.61.2

4754.11.1

3571.70.7

8.811.2

MRV 50MRV 5

20016.34.1

14022.73.2

9333.42.3

7042.92.0

5649.22.0

4756.41.7

3574.71.2

2887.10.9

23101.40.7

2098.90.6

18115.8

0.5

14136.30.4

10.915.1

MRV 61MRV 63MRV 7

3575.72.2

2888.31.6

23104.51.3

20102.51.2

18119.81.0

14141.30.7

14.214.220.9

MRV 80MRV 8

2889.63.4

23112.22.6

20129.02.1

18123.72.1

14146.41.5

19.728.4

0.55

MRV 50MRV 5

20024.22.8

14033.82.1

9349.71.5

7063.81.3

5673.21.3

4783.81.1

13.617.8

MRV 61MRV 63MRV 7

20024.46.1

14033.84.7

9350.33.4

7064.52.3

5675.02.5

4786.12.0

35112.61.5

28131.31.1

23155.30.9

16.916.923.6

MRV 80MRV8

7065.34.4

5676.04.6

4787.24.2

35115.62.8

28133.22.3

23166.71.7

20191.71.4

18183.81.4

14217.61.0

22.431.1

0.75

MRV 50MRV 5

20033.02.0

14046.001.6

9367.81.1

7087.01.0

5699.81.0

47114.30.8

14.618.8

MRV 61MRV 63MRV 7

20033.34.5

14046.03.4

9368.52.5

7088.01.7

56102.31.8

47117.31.5

35153.51.1

28179.10.8

23211.80.6

17.917.924.6

MRV 80MRV 8

7089.03.3

56103.63.4

47118.93.1

35157.62.0

28181.61.7

23227.31.3

20261.41.0

18250.71.0

14296.70.8

23.432.1

MRV 9035

149.42.4

28191.92.1

23224.21.6

20261.41.2

18238.81.1

14301.90.8

36.0

SELEZIONE STANDARDFattore di servizio minimo 1.0

STANDARD SELECTIONService Factor minimum 1.0

SELECTION STANDARDFacteur de Service minimum 1.0

Selezione MRV. MRV Selection. Seléction MRV.

8

MRVRiduttori a Vite Senza Fine.

Worm Gearboxes.Réducteurs à vis-sans-fin.




Service Factor (Fs)

Vitesse de Sortie rpm (n2)Couple de Sortie Nm (M2)

Facteur de Service (Fs)

Kw1 TYPE 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1 Kg FP

1.1

MRV 61MRV 63MRV 7

20048.93.1

14067.52.3

93100.51.7

70129.11.2

56150.11.3

47172.11.0

20.620.627.3

MRV 80MRV 8

20049.45.8

14068.34.4

93101.73.1

70130.62.2

56152.02.3

47174.32.1

35231.11.4

26.134.8

MRV 9020048.37.1

14066.85.1

9399.44.1

70127.62.6

56163.22.4

47174.32.4

35219.11.6

28281.41.4

23328.91.1

38.7

MRV 10056

153.84.2

47176.63.3

35231.12.4

28288.92.0

23342.61.8

20393.91.5

18379.41.4

14450.21.1

52.8

1.5

MRV 61MRV 63MRV 7

20066.62.2

14092.11.7

93137.11.2

70176.00.9

56204.60.9

47234.70.7

23.630.3

MRV 80MRV 8

20067.34.3

14093.13.2

93138.62.3

70178.01.6

56207.21.7

47237.71.5

35315.21.0

29.137.8

MRV 9020065.95.2

14091.13.8

93135.63.0

70174.01.9

56222.61.7

47237.71.7

35298.81.2

28383.71.0

23448.40.8

41.7

MRV 10056

209.83.1

47240.82.4

35315.21.8

28393.91.5

23467.11.3

20537.21.1

18517.31.0

14613.90.8

55.8

2.2

MRV 80MRV 8

20098.82.9

140136.62.2

93203.31.5

34.943.6

MRV 9020096.73.5

140133.62.6

93198.82.1

70255.11.3

56326.41.2

47348.71.2

47.5

MRV 10020098.85.2

140138.13.8

93203.32.8

70264.12.0

56307.72.1

47353.21.7

35462.21.2

28577.81.0

23685.10.9

61.6

MRV 12547

366.62.7

35474.22.1

28562.81.7

23703.41.3

20682.81.3

18782.01.1

14930.40.8

85.5

MRV 15028

592.82.6

23703.42.1

20724.91.8

18852.11.4

141005.5

1.197.5

3.0

MRV 80MRV 8

200134.72.1

140186.21.6

93277.31.1

38.447.1

MRV 90200

131.82.6

140182.11.9

93271.11.5

70347.91.0

56445.10.9

47475.50.9

51.0

MRV 100200

134.73.8

140188.32.8

93277.32.1

70360.21.5

56419.51.5

47481.61.2

35630.30.9

28787.90.7

23934.20.6

65.1

MRV 12547

499.92.0

35646.71.6

28767.41.2

23959.21.0

20931.10.9

181066.4

0.8

141268.8

0.689.0

MRV 15028

808.31.9

23959.21.5

20988.41.3

181161.9

1.1

141371.1

0.8101.0





9



MRV




Service Factor (Fs)

Vitesse de Sortie rpm (n2)Couple de Sortie Nm (M2)

Facteur de Service (Fs)

Kw1 TYPE 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1 Kg FP

4.0

MRV 80MRV 8

200179.51.6

140248.31.2

93369.70.9

46.154.8

MRV 90200

175.72.0

140242.81.4

93361.51.1

70463.90.7

56 593.50.7

47634.00.7

58.7

MRV 100200

179.52.9

140251.02.1

93369.71.6

70480.21.1

56 559.41.2

47642.10.9

35840.40.7

281050.5

0.5

231245.7

0.572.8

MRV 12547

666.51.5

35862.21.2

281023.2

0.9

231278.9

0.7

201241.5

0.7

181421.9

0.6

141691.7

0.596.7

MRV 15028

1077.81.4

231278.9

1.1

201317.9

1.0

181549.2

0.8

141828.1

0.6108.7

5.5

MRV 100200

246.92.1

140345.21.5

93508.31.1

70660.30.8

90.1

MRV 125200

249.53.0

140348.92.6

93514.01.7

70667.81.4

56778.51.3

47916.41.1

351185.6

0.8114

MRV 15070

667.82.2

56834.81.8

47938.71.8

351200.6

1.3

281482.0

1.0126

7.5

MRV 100200

336.61.5

140470.71.1

93693.20.8

70900.40.6

104.1

MRV 125200

340.22.2

140475.81.9

93700.91.3

70910.71.0

561061.6

0.9

471249.6

0.8

351616.7

0.6128

MRV 15070

910.61.6

561138.3

1.3

471280.1

1.3

351637.1

1.0

282020.9

0.8140

9.2

MRV 100 200

412.91.3

140577.40.9

93850.30.7

701104.5

0.5104.1

MRV 125200

417.31.8

140583.61.6

93859.71.0

701117.1

0.8

561302.2

0.8

471532.9

0.7

351983.1

0.5128

MRV 15070

1117.11.3

561396.4

1.1

471570.3

1.1

352008.2

0.8

282478.9

0.6140

11.0 MRV 150140

690.31.9

931016.6

1.5

701335.6

1.1182

15.0 MRV 150140

941.41.4

931386.3

1.1

701821.3

0.8206





10



Velocità in uscita (rpm) n2 Nominal output speed (rpm) n2 Vitesse de sortie (t/min) n2

Massima potenza in entrata (Kw) Kw1 Maximum input power (Kw) Kw1 Puissance d’entrée maximum (Kw) Kw1

Momento torcente massimo (Nm) M2 Maximum output torque (Nm) M2 Puissance de sortie maximum (Nm) M2

Rendimento % Efficiency % Rendement %

SIZE i 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1 Kg FP

30

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

1.3

0.44 0.33 0.24 0.19 0.15 0.11 0.08 0.06 0.06 0.05 0.04 0.04

19 20 21 21 21 17 16 14 16 12 13 12

91% 89% 86% 83% 83% 76% 71% 66% 62% 51% 55% 50%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

0.34 0.27 0.19 0.11 0.11 0.09 0.05 0.05 0.05 0.04 0.03 0.02

23 25 26 19 24 21 16 16 18 13 13 12

90% 87% 85% 81% 81% 74% 68% 63% 59% 48% 52% 47%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

0.23 0.18 0.12 0.09 0.07 0.06 0.04 0.03 0.03 0.03 0.02 0.02

28 30 30 27 25 25 19 18 21 15 15 13

89% 85% 83% 79% 78% 71% 65% 60% 55% 43% 48% 43%

( η2 ) 75% 73% 67% 55% 53% 51% 38% 36% 34% 29% 31% 28%

40

4

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

2.5

4.9

1.05 0.86 0.60 0.41 0.44 0.40 0.26 0.19 0.15 0.13 0.11 0.09

46 52 52 47 58 58 50 47 39 34 33 32

92% 89% 84% 84% 77% 72% 71% 72% 64% 54% 57% 52%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

0.81 0.65 0.42 0.31 0.34 0.27 0.20 0.14 0.12 0.09 0.07 0.06

55 61 56 54 66 59 60 52 45 32 31 31

91% 88% 83% 82% 74% 69% 68% 69% 61% 50% 54% 49%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

0.54 0.41 0.29 0.21 0.22 0.19 0.13 0.10 0.08 0.06 0.04 0.04

65 67 67 64 76 73 66 61 52 37 34 36

90% 86% 80% 80% 72% 66% 65% 66% 58% 47% 51% 45%

( η2 ) 76% 74% 67% 60% 58% 51% 42% 39% 37% 29% 27% 30%

50

5

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

4.6

8.8

1.53 1.17 0.84 0.73 0.72 0.62 0.44 0.33 0.26 0.23 0.19 0.14

67 72 76 85 96 95 88 77 71 61 59 51

92% 90% 88% 85% 78% 75% 74% 69% 66% 56% 59% 54%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

1.22 0.88 0.74 0.51 0.52 0.38 0.32 0.25 0.18 0.17 0.14 0.08

83 82 103 90 105 88 100 87 73 66 66 44

91% 88% 87% 83% 76% 72% 71% 66% 62% 53% 56% 50%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

0.81 0.58 0.53 0.33 0.34 0.26 0.23 0.17 0.13 0.12 0.10 0.06

98 96 130 101 120 104 119 103 85 76 76 50

90% 87% 85% 81% 73% 68% 68% 63% 59% 49% 52% 47%

(η2) 73% 67% 67% 53% 50% 45% 36% 35% 29% 32% 33% 22%

η2 = Rendimento all’avvio. η2 = start-up efficiency. η2 = Rendement à la demarrage.

Selezione RV. RV Selection. Seléction RV.

11



RV





SIZE i 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1 Kg FP

61 - 63

7

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

7.9

14.6

3.36 2.57 1.85 1.28 1.37 1.09 0.81 0.60 0.47 0.43 0.36 0.27

149 158 169 150 187 171 165 143 133 120 116 104

93% 90% 89% 86% 80% 77% 75% 70% 68% 58% 61% 56%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

2.59 1.97 1.42 0.98 1.01 0.81 0.59 0.48 0.42 0.38 0.29 0.24

178 186 196 174 208 191 184 171 172 152 144 130

92% 89% 87% 84% 78% 74% 72% 67% 64% 54% 57% 52%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

1.72 1.32 0.95 0.69 0.75 0.56 0.39 0.33 0.29 0.27 0.20 0.16

211 220 234 215 269 237 205 200 200 177 166 149

91% 87% 85% 82% 75% 71% 69% 64% 60% 49% 54% 48%

(η2 ) 77% 74% 67% 63% 58% 51% 47% 42% 41% 36% 33% 31%

80

8

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

13.4

22.1

6.37 4.85 3.40 2.43 2.55 2.30 1.51 1.24 0.95 0.78 0.77 0.57

286 301 314 289 352 364 318 300 289 272 258 225

94% 91% 90% 87% 81% 78% 77% 71% 73% 73% 63% 58%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

4.32 3.03 2.41 1.88 1.85 1.37 1.11 0.85 0.72 0.58 0.54 0.42

300 289 338 340 383 322 358 305 322 297 275 243

93% 90% 88% 85% 78% 74% 74% 68% 70% 70% 59% 54%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

3.04 2.30 1.66 1.26 1.30 1.05 0.75 0.59 0.46 0.39 0.38 0.41

372 386 412 400 465 437 399 360 350 346 320 381

91% 88% 86% 83% 75% 70% 70% 64% 67% 67% 55% 49%

(η2 ) 76% 71% 67% 65% 59% 50% 48% 43% 45% 39% 36% 31%

90

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

26

7.79 5.65 4.50 2.89 2.60 2.61 1.79 1.54 1.16 0.91 0.84 0.63

342 343 407 335 386 414 356 394 348 317 268 252

92% 89% 88% 85% 87% 78% 73% 75% 72% 73% 60% 59%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

5.86 3.96 3.43 2.28 2.04 2.14 1.36 1.18 0.94 0.67 0.63 0.49

398 366 470 397 461 511 414 450 412 346 302 291

91% 87% 86% 82% 85% 75% 70% 72% 69% 70% 55% 56%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

3.99 2.66 2.39 1.58 1.32 1.45 0.96 0.77 0.62 0.46 0.46 0.28

478 432 580 484 524 616 483 506 461 409 355 273

89% 85% 84% 80% 83% 71% 66% 69% 65% 67% 51% 51%

(η2 ) 76% 71% 67% 65% 59% 50% 48% 43% 45% 39% 36% 31%



12

RVRiduttori a Vite Senza Fine.






SIZE i 7:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 70:1 80:1 100:1 Kg FP

100

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

40.1

11.47 8.41 6.23 4.42 4.63 3.64 2.63 2.18 1.92 1.61 1.50 1.19

515 528 576 531 648 584 552 572 598 576 519 487

94% 92% 90% 88% 82% 79% 77% 77% 75% 75% 65% 60%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

8.60 6.51 4.67 3.33 3.43 2.84 1.88 1.73 1.56 1.24 1.21 0.94

597 629 662 607 728 686 604 678 723 658 639 556

93% 91% 89% 86% 80% 76% 74% 74% 73% 72% 61% 56%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

6.08 4.36 3.14 2.33 2.44 1.88 1.35 1.08 1.00 0.74 0.74 0.60

752 741 791 747 898 807 734 732 802 685 642 580

92% 89% 87% 84% 77% 72% 71% 71% 70% 69% 57% 51%

(η2 ) 69% 63% 57% 55% 51% 43% 37% 34% 27% 25% 22% 25%

125

n1 = 1400

200 140 93 70 56 47 35 28 23 20 18 14

64

16.56 14.34 9.40 7.76 6.90 5.96 4.64 3.71 2.88 2.81 2.40 1.83

751 910 878 942 976 993 1000 949 922 871 852 776

95% 93% 91% 89% 83% 82% 79% 75% 77% 65% 67% 62%

n1 = 900

129 90 60 45 36 30 22 18 15 13 11 9

12.90 10.51 7.07 6.04 6.06 4.95 3.47 2.67 2.24 2.29 1.83 1.50

905 1015 1013 1116 1286 1245 1129 1006 1054 1028 1003 924

94% 91% 90% 87% 80% 79% 75% 71% 74% 61% 63% 58%

n1 = 500

71 50 33 25 20 16 12 10 8 7 6 5

10.82 8.09 5.96 4.08 4.15 3.33 2.46 1.81 1.49 1.41 1.11 0,90

1339 1390 1517 1325 1527 1509 1355 1160 1212 1058 1000 915

92% 90% 88% 85% 77% 76% 72% 67% 71% 56% 59% 53%

(η2 ) 70% 65% 58% 55% 52% 44% 40% 38% 38% 29% 26% 24%

150

n1 = 1400

- 140 93 70 56 47 35 28 23 20 18 14

76

- 21.05 16.85 11.98 9.85 9.95 7.31 5.73 4.58 3.91 3.16 2.33

- 1321 1557 1455 1495 1698 1595 1543 1464 1289 1222 1067

- 92% 90% 89% 89% 84% 80% 79% 77% 69% 73% 67%

n1 = 900

- 90 60 45 36 30 22 18 15 13 11 9

- 16.46 13.36 9.46 7.48 7.46 5.63 4.36 3.63 2.95 2.30 1.94

- 1572 1871 1746 1727 1948 1881 1760 1712 1408 1396 1298

- 90% 88% 87% 87% 82% 77% 76% 74% 65% 70% 63%

n1 = 500

- 50 33 25 20 16 12 10 8 7 6 5

- 11.23 8.70 6.72 5.08 5.58 3.85 3.01 2.33 1.93 1.58 1.15

- 1887 2166 2183 2062 2629 2150 2073 1869 1552 1596 1291

- 88% 86% 85% 85% 79% 73% 72% 70% 60% 66% 59%

(η2 ) - 65% 58% 57% 56% 53% 40% 40% 38% 32% 26% 26%



13



RV

A B V FP F

B3

V5

V6

B8

B6

B7

Posizioni di montaggio. Mounting positions. Position de montage.

14

F - FP in B3, V5, V6, B8 = vista dall’alto / upper side view / vis à l’avant

MRV - RVRiduttori a Vite Senza Fine.


15

Tappi. Oil plugs. Bouchons.


A B V FP F

B3

V5

V6

B8

B6

B7

MRV - RVRiduttori a Vite Senza Fine.


Rapporto / Ratio / Rapport

SIZE IECN M P Q 7 10 15 20 25 30 40 50 60 70 80 100

B5 B14 B5 B14 B5 B14 B5 B14 D

3056 - 50 - 65 - 80 - 54 9 9 9 9 9 9 9 9 9 9 9 9

63 - 60 - 75 - 90 - 54 11 11 11 11 11 11 11 11 - - - -

404

63 95 60 115 75 140 90 64 65 11 11 11 11 11 11 11 11 11 11 11 11

71 110 70 130 85 160 105 65 64 14 14 14 14 14 14 14 - - - - -

50

5

63 95 60 115 75 140 90 75 73 - - - - - - 11 11 11 11 11 11

71 110 70 130 85 160 105 75 77 14 14 14 14 14 14 14 14 14 14 14 14

80 130 80 165 100 200 120 82 78 19 19 19 19 19 19 - - - - - -

AI 63 80 97 74 16 16 16 16 16 16 16 16 16 16 16 16

61 - 63

7

71 110 70 130 85 160 105 96 98 - - - - - - 14 14 14 14 14 14

80 130 80 165 100 200 120 96 99 19 19 19 19 19 19 19 19 19 - - -

90 130 95 165 115 200 140 96 98 24 24 24 24 24 24 - - - - - -

AI 82.5 106.4 130 101 25 25 25 25 25 25 25 25 25 25 25 25

80

8

71 110 - 130 - 160 - 116 - - - - - - - - 14 14 14 14 14

80 130 80 165 100 200 120 114 116 - - - 19 19 19 19 19 19 19 19 19

90 130 95 165 115 200 140 114 116 24 24 24 24 24 24 24 - - - - -

100/112 180 110 215 130 250 160 128 116 28 28 28 - - - - - - - - -

AI 82.5 106.4 130 123.5 25 25 25 25 25 25 25 25 25 25 25 25

90

80 130 - 165 - 200 - 137 - - - - - - - 19 19 19 19 19 19

90 130 - 165 - 200 - 137 - 24 24 24 24 24 24 24 24 24 - - -

100/112 180 110 215 130 250 160 137 140.5 28 28 28 28 28 28 - - - - - -

AI 82.5 106.4 130 142 25 25 25 25 25 25 25 25 25 25 25 25

100

90 130 - 165 - 200 - 142 - - - - - 24 24 24 24 24 24 24 24

100/112 180 110 215 130 250 160 142 145.5 28 28 28 28 28 28 28 28 28 - - -

132 230 - 265 - 300 - 152 - 38 38 38 38 - - - - - - - -

AI 82.5 106.4 130 150 25 25 25 25 25 25 25 25 25 25 25 25

125

100/112 180 - 215 - 250 - 164 - - - - - - 28 28 28 28 28 28 28

132 230 - 265 - 300 - 167 - 38 38 38 38 38 38 38 - - - - -

AI 82.5 106.4 130 170 25 25 25 25 25 25 25 25 25 25 25 25

150

100/112 180 - 215 - 250 - 185 - - - - - - - - 28 28 28 28 28

132 230 - 265 - 300 - 185 - - - - 38 38 38 38 38 - - - -

160 250 - 300 - 350 - 185 - 42 42 42 42 - - - - - - - -

AI 82.5 106.4 150 188 25 25 25 25 25 25 25 25 25 25 25 25

16

Dimensioni PAM. IEC Dimensions. Dimensions IEC.

AI = Attacco motore idraulico. AI = Hydraulic motor input. AI = Bride d’entrée pour moteur hydraulique.



17

TYPE B D(H7)

D1(j6) E1 G1 h H1 I M N N1 P Q2 KE b b1 f g t t1

4 FP 22 19 11 124 82 60 59 40 83 60 37.5 100 86 M6 6 4 M5 2 21.8 12.5

5 FP 30 24 14 155 98 72 69 50 85 70 52.5 120 104 M8 8 5 M6 2.5 27.3 16

7 FP 40 28 19 200 120 92 87 63 100 80 54 118 137 M8 8 6 M8 4.5 31.3 21.5

8 FP 50 32 24 240 122 111 105 80 130 110 56.5 150 165 M10 10 8 M8 4 35.3 27

90 FP 50 38 24 250 150 125 107 90 130 110 71.5 160 181 M10 10 8 M8 3.5 41.3 27

100 FP 60 42 28 305 155 142 135 100 165 130 74 200 206 M12 12 8 M8 3.5 45.3 31

125 FP 80 48 38 350 180 156 150 125 215 180 78.5 268 246 M12 14 10 M10 11.5 51.8 41

150 FP 100 55 42 393 190 155 165 150 230 200 88 270 278 M14 16 12 M10 5 59.3 45

Serie Modulare - FP Modular Series - FP Série Modulaire - FP

TYPE B C1D

(H7)D1

(j6) E1 G1 h H1 I M N N1 N2 P Q2 KO KE b b1 f g m t t1

30 FP 4 20 - 14 9 94 60 38 41.5 30 - - - 25 61.3 71 M5 - 5 3 M4 4 75 16.3 10.5

30 FP 3 20 - 14 9 94 60 38 41.5 30 - - - 25 61.3 71 6 - 5 3 M4 4 69 16.3 10.5

40 FP 22 84 19 11 109 82 56 42 40 65 50 34 38.4 77 86 M6 M6 6 4 M5 2 96 21.8 12.5

50 FP 30 105 24 14 133 98 68 52.5 50 85 70 40 46.5 96 104 M8 M8 8 5 M6 2.5 120 27.3 16

61 FP 40 130 25 19 165 120 90 65 63 85 70 51.5 57.5 122 137 M8 M8 8 6 M8 2.5 148 28.3 21.5

63 FP 40 130 28 19 165 120 90 65 63 100 80 51.5 54 122 137 M8 M8 8 6 M8 4.5 148 31.3 21.5

80 FP 50 180 32 24 212 122 110 90 80 130 110 52 56.5 168 165 M8 M10 10 8 M8 4 190 35.3 27

Serie Pesante - FP Strong Series - FP Série Forte - FP

Albero cavo uscita Output hollow shaftArbre creux de sortie

Albero d’entrata Solid input shaftArbre d’entreé solid

30



40 - 80



MRV - RV

FP 4 FP 3

18

SIZE A C D(H7)

D1(j6)

EG1 H I L O S K b b1 f

hn

q1 yt t1

Ver. A Ver. B A / B V V

4 A/B/V 70 100 19 11 143 130 82 71 40 102 7 8 84 6 4 M5 60 25 59 32 21.8 12.5

5 A/B/V 85 120 24 14 171 154 98 85 50 119 9 10 99 8 5 M6 72 28 69 36 27.3 16

7 A/B/V 120 158 28 19 228 202 120 115 63 140 11 13 116 8 6 M8 92 30 87 50 31.3 21.5

8 A/B/V 140 193 32 24 270 240 122 135 80 168 13 15 140 10 8 M8 111 31 105 55 35.3 27

90 A/B/V 160 208 38 24 293 257 150 150 90 198 13 15 164 10 8 M8 125 44 107 53 41.3 27

100 A/B/V 200 250 42 28 342 307 155 172* 100 200 14 17 162 12 8 M8 142 43 135 70 45.3 31

125 A/B/V 235 286 48 38 400 350 180 200* 125 230 15 19 190 14 10 M10 156 52 150 75 51.8 41

150 A/B/V 260 320 55 42 458 395 190 230* 150 250 19 20 210 16 12 M10 155 56 165 78 59.3 45 *Tappo di scarico sotto i piedi *Drain plug below feet *Bouchon de vidange entre les pattes

SIZE A C D(H7)

D1(j6)

EG1 H I L O S K b b1 f

hn

yt t1

Ver. A Ver. B A / B V

30 A/B/V 52 70 14 9 105 94 60 52 30 80 5.5 6 66 5 3 M4 38 15 23 16.3 10.5

40 A/B/V 70 98 19 11 138 115 82 71 40 104 7 7 84 6 4 M5 56 25 27 21.8 12.5

50 A/B/V 85 112 24 14 165 140 98 85 50 120 9 8 99/101 8 5 M6 68 28 30 27.3 16

61 A/B/V 120 170 25 19 215 182 120 115 63 145 11 10 116 8 6 M8 90 30 37 28.3 21.5

63 A/B/V 120 170 28 19 215 182 120 115 63 145 11 10 116 8 6 M8 90 30 37 31.3 21.5

80 A/B/V 140 190 32 24 257 226 122 135 80 166 12 12 136/144 10 8 M8 110 31 42 35.3 27 *Tappo di scarico sotto i piedi *Drain plug below feet *Bouchon de vidange entre les pattes

Serie Modulare - A/B/V Modular Series - A/B/V Série Modulaire - A/B/V

Serie Pesante - A/B/V Strong Series -A/B/V Série Forte -A/B/V


Albero d’entrata (vedi pag. 19) Solid input shaft (see page 19)Arbre d’entreé solid (voir page 19)



Piedi tipo S1 - vedere a pagina 46 Feet types S1 - see page 46 Pattes type S1 - à la page 46

A A B V

A A B V



19

SIZE B D(H7)

D1(j6) G1 h H2 I Q2 KA KB KC KM KN KO KP KQ b b1 f p t t1 y

4 F 22 19 11 82 60 70 40 86 82 11 4 115 95 8.5 140 112 6 4 M5 123 21.8 12.5 27

5 F 30 24 14 98 72 80 50 104 91.5 11 4 130 110 10 160 119 8 5 M6 140.5 27.3 16 30.5

7 F 40 28 19 120 92 100 63 137 111 11 5 165 130 13 200 154 8 6 M8 171 31.3 21.5 37

8 F 50 32 24 122 111 100 80 165 100 13 5 165 130 13 200 158 10 8 M8 161 35.3 27 42

90 F 50 38 24 150 125 107 90 181 127 16 5 215 180 14 250 210 10 8 M8 202 41.3 27 53

100 F 60 42 28 155 142 135 100 206 150 13 5 215 180 14 250 210 12 8 M8 227.5 45.3 31 70

125 F 80 48 38 180 156 150 125 246 150 15 5 265 230 15 300 260 14 10 M10 240 51.8 41 75

150 F 100 55 42 190 155 165 150 278 160 20 6 300 250 19 350 270 16 12 M10 255 59.3 45 78

Flange tipo F1 - vedere a pagina 46 Output flanges types F1 - see page 46 Brides type F1 - à la page 46



SIZE B D(H7)

D1(j6) G1 h H2 I Q2 KA KB KC KM KN KO KP KQ b b1 f p t t1 y

30 F 20 14 9 60 38 41.5 30 71 65 6 3 56 40 5.5 70 - 5 3 M4 95 16.3 10.5 23

40 F 22 19 11 82 56 42 40 86 82 10 4 115 95 8.5 140 106 6 4 M5 123 21.8 12.5 27

50 F 30 24 14 98 68 52.5 50 104 91.5 10 4 125/135 110 10 160 125 8 5 M6 140.5 27.3 16 30

61 F 40 25 19 120 90 65 63 137 111 9 5 165 130 13 200 154 8 6 M8 171 28.3 21.5 37

63 F 40 28 19 120 90 65 63 137 111 9 5 165 130 13 200 154 8 6 M8 171 31.3 21.5 37

80 F 50 32 24 122 110 90 80 165 100 13 6 165 130 11 200 155 10 8 M8 161 35.3 27 42

Serie Modulare - F Modular Series - F Série Modulaire - F

Serie Pesante - F Strong Series - F Série Forte - F



Flange tipo F1, F2, F3, F4 - vedere a pagina 46 Output flanges types F1, F2, F3, F4 - see page 46 Brides type F1, F2, F3, F4 - à la page 46



MRV - RV

SIZE n1=1400 NEWTONS SIZE n1=1400 NEWTONS SIZE n1=1400 NEWTONS

30/30

FR 1600

50/61

50/63

FR 4700

63/125

FR 11600

FA 400 FA 1175 FA 2900

Fr 65 Fr 460 Fr 560

Fa 20 Fa 115 Fa 140

30/40

FR 2300

50/80

FR 5800

80/125

FR 11600

FA 575 FA 1450 FA 2900

Fr 65 Fr 460 Fr 700

Fa 20 Fa 115 Fa 175

30/50

FR 3350

50/90

FR 6770

80/150

FR 16800

FA 837 FA 1693 FA 4200

Fr 65 Fr 460 Fr 700

Fa 20 Fa 115 Fa 175

40/50

FR 3350

50/100

FR 8270

90/150

FR 16800

FA 837 FA 2068 FA 4200

Fr 360 Fr 460 Fr 800

Fa 90 Fa 115 Fa 200

40/61

40/63

FR 4700

63/90

FR 6770

FA 1175 FA 1693

Fr 360 Fr 560

Fa 90 Fa 140

40/80

FR 5800

63/100

FR 8270

FA 1450 FA 2068

Fr 360 Fr 560

Fa 90 Fa 140

20

Carichi sugli alberi. Axial and radial shaft loads. Charges admissibles sur les arbres.

MRVC - RVCRiduttori a Vite Senza Fine.








Service Factor (Fs)


KW TYPE Kg FP

0.06

MRVC30/30

13.3350.7

9.337

0.67

7.0500.5

6.650

0.38

5.065

0.38

4.080

0.25

3.580

0.25

2.892

0.22

2.01350.15

1.41720.12

0.73030.07

0.353930.05

0.235980.03

0.146140.03

5.4

MRVC30/40

13.336

1.38

9.336

1.35

7.0501.0

6.6501.0

5.066

0.75

4.0810.6

3.5820.6

2.81000.5

2.01380.36

1.42010.25

0.72700.19

0.354260.12

0.234980.1

0.147370.07

6.4

MRVC30/50

13.3382.0

9.3382.0

7.0501.5

6.6501.5

5.077

1.17

4.0901.0

3.5901.0

2.8901.0

2.01350.67

1.41800.5

0.73030.3

0.354910.18

0.236730.13

0.1410640.08

8.6

0.09

MRVC30/40

13.354

0.92

9.355

0.97

7.075

0.67

6.675

0.66

5.01000.5

4.01220.41

3.51220.41

2.81500.33

2.02060.24

1.43010.17

0.74050.12

0.356380.08

0.237470.07

0.1411050.05

6.6

MRVC30/50

13.357

1.34

9.357

1.33

7.0751.0

6.6751.0

5.01150.8

7.9

0.18

MRVC40/50

13.31001.0

9.31001.0

11.8

MRVC40/63-61

13.31091.38

9.31071.4

7.01301.38

6.61301.38

5.01791.0

15.2

MRVC50/63-61

13.31081.82

9.31071.85

7.01301.83

6.61301.83

5.01801.33

4.02530.94

3.52500.95

2.982700.88

17.7

MRVC40/80

13.31102.2

9.31102.2

7.01571.85

6.61401.85

5.01551.68

4.02541.34

3.52551.33

2.82761.23

2.04130.95

20.9

MRVC50/80

7.01572.5

6.61562.5

5.02001.96

4.02321.68

3.52601.5

2.82821.38

2.04130.95

23.5

MRVC50/90

5.02002.4

4.02402.0

3.52402.0

2.82761.74

2.04131.16

1.45400.89

36.7

MRVC50/100

5.02002.9

4.02362.9

3.52602.7

2.82762.5

2.04211.8

1.45031.57

0.78840.89

50.5

0.25

MRVC40/63-61

13.31511.0

9.31491.0

7.01811.0

6.61811.0

19.3

MRVC50/63-61

13.31511.31

9.31491.33

7.01811.32

6.61811.32

5.02480.96

22.9

MRVC40/80

13.31531.64

9.31521.65

7.02181.33

6.61951.33

5.02151.21

4.03521.0

3.53540.96

2.83830.9

25.5

MRVC50/80

13.31512.32

9.31522.31

7.02181.8

6.62171.8

5.02771.4

4.03221.2

3.53611.08

2.83921.0

38.7

MRVC50/90

13.31542.7

9.31542.7

7.02152.23

6.62132.25

5.02771.73

4.03341.44

3.53341.44

2.83841.25

2.05730.84

41.8

MRVC63/90

7.02152.5

6.62132.5

5.02771.95

4.03281.64

3.53271.65

2.83751.44

2.05610.96

52.5

MRVC50/100

7.02122.7

6.62102.8

5.02772.13

4.03282.1

3.53611.94

2.83831.85

2.05851.35

1.46991.13

63.1

MRVC63/100

4.03642.17

3.53682.14

2.83832.06

2.05851.35

1.47001.13

86.9




21

Selezione MRVC. MRVC Selection. Sélection MRVC.



MRVC




Service Factor (Fs)


KW TYPE Kg FP

0.37

MRVC50/63-61

13.32230.89

9.32200.9

7.02680.89

6.62680.89

19.3

MRVC40/80

13.32261.11

9.32241.12

7.03230.9

6.62890.9

5.03180.82

22.9

MRVC50/80

13.32231.57

9.32241.56

7.03231.21

6.63211.21

5.04090.95

4.04770.82

25.5

MRVC50/90

13.32291.89

9.32281.84

7.03181.51

6.63161.52

5.04101.17

4.04950.97

3.54950.97

2.85680.85

38.7

MRVC63/90

13.32232.2

9.32242.2

7.03181.7

6.63161.71

5.04101.32

4.04861.11

3.54851.11

2.85550.97

41.8

MRVC50/100

13.32262.44

9.32282.41

7.03131.89

6.63111.90

5.04101.44

4.04861.42

3.55351.31

2.85681.25

2.08660.91

52.5

MRVC63/100

7.03132.5

6.63102.5

5.03892.0

4.05391.47

3.55451.45

2.85681.38

2.08660.91

1.410350.80

63.1

MRVC80/125

4.04862.7

3.54542.4

2.85932.2

2.08481.5

1.410851.2

0.717670.75

86.9

0.55

MRVC50/80

13.33321.06

9.33331.05

7.04800.81

6.64780.82

28.2

MRVC50/90

13.33401.24

9.33391.24

7.04721.02

6.64701.02

5.06090.80

41.4

MRVC63/90

13.33321.48

9.33331.47

7.04731.14

6.64701.15

5.06100.89

44.5

MRVC50/100

13.33361.64

9.33391.62

7.04651.27

6.64621.28

5.06091.0

4.07221.0

3.57950.88

2.88440.84

55.2

MRVC63/100

13.33002.3

9.33452.3

7.04651.7

6.64621.7

5.05781.37

4.08011.0

3.58101.0

2.88440.94

59.5

MRVC80/125

7.04882.7

6.64862.7

5.06622.0

4.07221.83

3.58101.63

2.88811.5

2.012611.05

1.416130.82

89.6

MRVC80/150

4.07352.7

3.57352.7

2.88622.32

2.012341.62

1.416511.21

0.724760.81

104.6




22

Selezione MRVC. MRVC Selection. Sélection MRVC.

MRVCRiduttori a Vite Senza Fine.





Service Factor (Fs)


KW TYPE Kg FP

0.75

MRVC50/90

13.34630.91

9.34620.91

42.4

MRVC63/90

13.34521.08

9.34541.08

7.06450.84

6.66400.84

45.5

MRVC50/100

13.34581.2

9.34621.19

7.06340.93

6.66290.94

56.2

MRVC63/100

13.34091.69

9.34701.68

7.06341.25

6.66291.26

5.07881.0

60.5

MRVC80/125

13.34582.8

9.34622.8

7.06652.0

6.66622.0

5.09021.46

4.09851.34

3.511051.19

2.812021.10

2.017190.8

90.6

MRVC80/150

7.06452.9

6.65972.9

5.08312.41

4.010032.0

3.510032.0

2.811771.7

2.016831.19

1.422510.89

105.6

MRVC90/150

5.08312.8

4.010032.34

3.510032.34

2.811772.0

2.016831.4

1.422511.04

118.7

1.1

MRVC50/100

13.36710.82

9.36780.81

58.9

MRVC63/100

13.36001.15

9.36891.15

7.09300.85

6.69230.86

63.2

MRVC80/125

13.36711.97

9.36781.96

7.09751.35

6.69711.36

5.013241.0

4.014440.91

3.516210.81

93.3

MRVC80/150

13.36632.7

9.36662.7

7.09452.0

6.68752.0

5.012191.64

4.014711.36

3.514711.36

2.817261.16

2.024690.95

108.3

MRVC90/150

7.09452.35

6.68752.35

5.012191.93

4.014711.60

3.514711.60

2.817261.36

2.024690.95

121.4

1.5

MRVC80/125

13.39161.44

9.39241.43

7.013301.0

6.613241.0

96.3

MRVC80/150

13.39052.0

9.39092.0

7.012891.47

6.611941.47

5.016621.2

4.020061.0

3.520061.0

2.823530.85

111.3

MRVC90/150

13.39052.36

9.39092.35

7.012891.72

6.611941.72

5.016621.41

4.020061.17

3.520061.17

2.823531.0

124.7

2.2

MRVC80/125

13.313430.98

9.313550.97

102.1

MRVC80/150

13.313271.37

9.313331.37

7.018911.0

6.617511.0

5.024370.82

117.1

MRVC90/150

13.313271.61

9.313331.60

7.018911.17

6.617511.17

5.024370.96

4.029410.8

3.529410.8

130.2

3.0

MRVC80/150

13.318091.0

9.318181.0

120.6

MRVC90/150

13.318091.18

9.318181.18

7.025790.86

6.623880.86

132.2

4.0 MRVC90/150

13.324130.89

9.324230.88

145.2




23

Selezione MRVC. Selezione MRVC. Selezione MRVC.



MRVC

24

Selezione RVC. RVC Selection. Sélection RVC.

Ratio 105 150 200 210 280 300 350 400 420 500 560 600 700 750Kg FP

n2 13.3 9.3 7.0 6.6 5.0 4.6 4.0 3.5 3.3 2.8 2.5 2.3 2.0 1.86

30/300.042

2583%

0.0402561%

0.0302561%

0.0302558%

0.0232557%

0.0232553%

0.0152056%

0.0152049%

0.0152046%

0.0132045%

0.0132040%

0.0102049%

0.0092047%

0.0092043%

3.0

30/400.083

5084%

0.0815060%

0.065061%

0.065058%

0.0455058%

0.0455054%

0.0375057%

0.0375050%

0.0375047%

0.035049%

0.035044%

0.0225055%

0.0225048%

0.0225044%

4.0

30/500.127688%

0.127662%

0.097661%

0.097558%

0.077567%

0.079063%

0.069063%

0.069055%

0.069052%

0.069044%

0.069039%

0.049055%

0.049047%

0.049044%

6.2

40/500.1810077%

0.1810054%

0.1310057%

0.1310053%

0.1310040%

0.1010049%

0.0710060%

0.0710052%

0.0710049%

0.0710042%

0.0710037%

0.05210047%

0.04410048%

0.04410044%

7.5

40/6140/63

0.2515084%

0.2515058%

0.2518053%

0.2518050%

0.1818052%

0.1618055%

0.1318058%

0.1318051%

0.1318048%

0.1218044%

0.1218039%

0.08918049%

0.08218046%

0.08218043%

10.9

40/800.4125085%

0.4125059%

0.3329064%

0.3326054%

0.3026045%

0.3034055%

0.2434059%

0.2434052%

0.2434049%

0.2234045%

0.2237044%

0.1939050%

0.1739048%

0.1739045%

16.6

50/6150/63

0.3319884%

0.3319858%

0.3323853%

0.3323850%

0.2423852%

0.2123855%

0.1723859%

0.1723851%

0.1723848%

0.1623844%

0.1623839%

0.1223848%

0.1123845%

0.1123842%

13.0

50/800.5835084%

0.5835059%

0.4539064%

0.4539060%

0.3539058%

0.3539054%

0.3039054%

0.2739053%

0.2739050%

0.2539046%

0.2539041%

0.1939050%

0.1739048%

0.1739045%

19.2

50/900.6842086%

0.6842060%

0.5648063%

0.5648059%

0.4348058%

0.4348054%

0.3648056%

0.3648049%

0.3648046%

0.3148045%

0.3148041%

0.2148056%

0.2148048%

0.2148045%

32.4

50/1000.955085%

0.955060%

0.759062%

0.759058%

0.5359058%

0.669056%

0.5369055%

0.4870053%

0.4870050%

0.4671045%

0.4674042%

0.3979049%

0.3479049%

0.3479045%

46.2

63/900.8149084%

0.8149059%

0.6354063%

0.6354059%

0.4954058%

0.4954054%

0.4154055%

0.4154048%

0.4154046%

0.3654044%

0.3654039%

0.2854047%

0.2454047%

0.2454044%

35.5

63/1001.2769076%

1.2779061%

0.9479062%

0.9479058%

0.7579055%

0.6979056%

0.5479061%

0.5479054%

0.5479051%

0.5179045%

0.5179041%

0.3979049%

0.3479049%

0.3479045%

50.5

63/1251.7192075%

1.71107061%

1.41111058%

1.30115061%

1.00115060%

1.12132058%

0.75108060%

0.89132054%

0.9132051%

0.82132047%

0.82132042%

0.67132048%

0.56127047%

0.58132044%

74.2

80/1252.16132085%

2.16132060%

1.5132065%

1.5132061%

1.1132063%

1.12132058%

1.0132055%

0.9132054%

0.9132051%

0.82132047%

0.82132042%

0.67132048%

0.58132048%

0.58132044%

80.5

80/1503.0182084%

3.0182059%

2.2189063%

2.2175055%

1.8200058%

1.87200052%

1.5200056%

1.5200049%

1.5200046%

1.27200046%

1.27200041%

1.04200047%

0.89200047%

0.89200044%

95.6

90/1503.53213984%

3.53213959%

2.59222163%

2.59205655%

2.12235058%

2.2235052%

1.76235056%

1.76235049%

1.76235046%

1.49235046%

1.49235046%

1.22235547%

1.05235047%

1.05235044%

108.7

Potenza massima in entrata Kw (Kw1max) Maximum input Kw (Kw1max) Puissance d’entrée maximum Kw (Kw1max)Momento torcente massimo Nm (M2max) Maximum output torque Nm (M2max) Puissance de sortie maximum Nm (M2max)

Rendimento % (η) Efficiency % (η) Rendment % (η)

RVCRiduttori a Vite Senza Fine.


25

Selezione RVC. RVC Selection. Sélection RVC.

Ratio 1000 1200 1500 2000 2400 3000 4000 5000 6000 8000 10000Kg FP

n2 1.4 1.16 0.93 0.7 0.58 0.46 0.35 0.28 0.23 0.17 0.14

30/300.007

2042%

0.0062040%

0.0052039%

0.0042037%

0.0042030%

0.0032032%

0.0032024%

0.0022029%

0.0022029%

0.0022024%

0.0022021%

3.0

30/400.015

5049%

0.0155040%

0.0155032%

0.0115033%

0.0075043%

0.0075034%

0.0075026%

0.0065024%

0.0065020%

0.00550

18%

0.0045018%

4.0

30/500.039044%

0.279040%

0.029044%

0.0189037%

0.0189030%

0.0139033%

0.0119030%

0.019026%

0.0089027%

0.0079023%

0.0059026%

6.2

40/500.03710040%

0.0310040%

0.0310032%

0.02210033%

0.01510040%

0.01510032%

0.01310028%

0.01110027%

0.0110024%

0.00810022%

0.00710021%

7.5

40/6140/63

0.0618044%

0.0518044%

0.04418040%

0.03718036%

0.0318036%

0.0318029%

0.02218030%

0.02218024%

0.01518029%

0.01518021%

0.01518018%

10.9

40/800.1339044%

0.1139043%

0.1039038%

0.08239035%

0.06739035%

0.06039031%

0.05239027%

0.04539025%

0.03739025%

0.0339023%

0.0339019%

16.6

50/6150/63

0.0823844%

0.0723841%

0.0623839%

0.0523835%

0.0423836%

0.0423829%

0.0323829%

0.0323823%

0.0223829%

0.0223821%

0.0223817%

13.0

50/800.1339044%

0.1139043%

0.1039038%

0.08239035%

0.06739035%

0.0639031%

0.05239027%

0.04539025%

0.03739025%

0.0339023%

0.0339019%

19.2

50/900.1648044%

0.1348045%

0.1348036%

0.0948039%

0.0948032%

0.07248032%

0.06248028%

0.05248027%

0.04648025%

0.04648019%

0.03748019%

32.4

50/1000.2879041%

0.2379042%

0.279038%

0.1679036%

0.1479034%

0.1279032%

0.179029%

0.0979026%

0.07579025%

0.06779021%

0.0679019%

46.2

63/900.1854044%

0.1654041%

0.1654033%

0.1254033%

0.1254027%

0.154026%

0.0754028%

0.05854027%

0.05254025%

0.04854020%

0.04254019%

35.5

63/1000.2879041%

0.2379042%

0.279038%

0.1679036%

0.1479034%

0.1279032%

0.179029%

0.0979026%

0.07579025%

0.06779021%

0.0679019%

50.5

63/1250.45132043%

0.39132041%

0.34132038%

0.28132035%

0.23132035%

0.20132032%

0.17132028%

0.15132026%

0.13132024%

0.11132021%

0.10132019%

74.2

80/1250.45132043%

0.39132041%

0.34132038%

0.28132035%

0.23132035%

0.2132032%

0.17132028%

0.15132026%

0.13132024%

0.11132021%

0.10132019%

80.5

80/1500.67200044%

0.6200040%

0.56200035%

0.45200033%

0.37200033%

0.3200032%

0.26200028%

0.22200027%

0.19200025%

0.17200021%

0.15200020%

95.6

90/1500.79235044%

0.71235040%

0.66235035%

0.53235033%

0.43235033%

0.35235032%

0.31235028%

0.26235027%

0.22235026%

0.20235021%

0.18235019%

108.7

Potenza massima in entrata Kw (Kw1max) Maximum input Kw (Kw1max) Puissance d’entrée maximum Kw (Kw1max)Momento torcente massimo Nm (M2max) Maximum output torque Nm (M2max) Puissance de sortie maximum Nm (M2max)

Rendimento % (η) Efficiency % (η) Rendment % (η)



RVC

26

Posizioni di montaggio. Mounting positions. Positions de montage.

A B FP F

POSI

ZIO

NE

ALB

ERO

EN

TRAT

A -

INPU

T SH

AFT

PO

SITI

ON

- P

OSI

TIO

N D

E L’

ARB

RE D

’EN

TREE

1

2

3

4

5

6

MRVC - RVCRiduttori a Vite Senza Fine.


27

SIZE B B1 D(H7) D1(j6) E1 E2 G1 h H1 H3 I I2 M N N1 P Q2 Q5 KE b b1 f g h1 t t1

50 / 90 FP 30 49 38 14 250 277 150 125 107 53 90 50 130 110 71.5 160 104 210 M10 10 5 M6 3.5 68 41.3 16

50 / 100 FP 30 49 42 14 305 315 155 142 135 53 100 50 165 130 74 200 104 218.5 M12 12 5 M6 3.5 68 45.3 16

63 / 90 FP 40 60 38 19 250 297 150 125 107 65 90 63 130 110 71.5 160 137 223.5 M10 10 6 M8 3.5 90 41.3 21.5

63 / 100 FP 40 60 42 19 305 335 155 142 135 65 100 63 165 130 74 200 137 232 M12 12 6 M8 3.5 90 45.3 21.5

63 / 125 FP 40 60 48 19 350 375 180 156 150 65 125 63 215 180 78.5 268 137 252.5 M12 14 6 M8 11.5 90 51.8 21.5

80 / 125 FP 50 61 48 24 350 397 180 156 150 90 125 80 215 180 78.5 268 165 260 M12 14 8 M8 11.5 110 51.8 27

80 / 150 FP 50 61 55 24 393 437 190 155 165 90 150 80 230 200 88 270 165 265 M14 16 8 M8 5 110 59.3 27

90 / 150 FP 50 75 55 24 393 458 190 155 165 107 150 90 230 200 88 270 181 312 M14 16 8 M8 5 125 59.3 27


SIZE B B1 C1 D (H7)

D1 (j6) E1 E2 G1 h H1 H3 I I2 M N N1 N2 P Q2 Q5 KO KE b b1 f g h1 m t t1

30 / 30 FP4 20 30 - 14 9 94 124 60 38 41.5 - 30 30 - - - 25 61.3 71 97 M5 - 5 3 M4 4 - 75 16.3 10.5

30 / 40 FP 20 30 84 19 9 109 135 82 56 42 41.5 40 30 65 50 34 38.4 77 71 110 M6 M6 6 3 M4 2 38 96 21.8 10.5

30 / 50 FP 20 30 105 24 9 133 155 98 68 52.5 41.5 50 30 85 70 40 46.5 96 71 120 M8 M8 8 3 M4 2.5 38 120 27.3 10.5

40 / 50 FP 22 41 105 24 11 133 170 98 68 52.5 42 50 40 85 70 40 46.5 96 86 130 M8 M8 8 4 M5 2.5 56 120 27.3 12.5

40 / 61 FP 22 41 130 25 11 165 195 120 90 65 42 63 40 85 70 51.5 57.5 122 86 158 M8 M8 8 4 M5 2.5 56 148 28.3 12.5

40 / 63 FP 22 41 130 28 11 165 195 120 90 65 42 63 40 100 80 51.5 54 122 86 158 M8 M8 8 4 M5 4.5 56 148 31.3 12.5

40 / 80 FP 22 41 180 32 11 212 237 122 110 90 42 80 40 130 110 52 56.5 168 86 157 M8 M10 10 4 M5 4 56 190 35.3 12.5

50 / 61 FP 30 49 130 25 14 165 208 120 90 65 53 63 50 85 70 51.5 57.5 122 104 186.5 M8 M8 8 5 M6 2.5 68 148 28.3 16

50 / 63 FP 30 49 130 28 14 165 208 120 90 65 53 63 50 100 80 51.5 54 122 104 186.5 M8 M8 8 5 M6 4.5 68 148 31.3 16

50 / 80 FP 30 49 180 32 14 212 250 122 110 90 53 80 50 130 110 52 56.5 168 104 190 M8 M10 10 5 M6 4 68 190 35.3 16








MRVC - RVC

28

SIZE A B1 C D (H7)

EE2 G1 H H3 I I2 L O Q5 S K b b1 f

hh1 h2 t t1

Ver. AVer. B A / B

50 / 90 A-B 160 49 208 38 293 257 320 150 150 53 90 50 198 13 210 15 164 10 5 M6 125 68 80 41.3 16

50 / 100 A-B 200 49 250 42 342 307 352 155 172 53 100 50 200 14 218.5 17 162 12 5 M6 142 68 80 45.3 16

63 / 90 A-B 160 60 208 38 293 257 340 150 150 65 90 63 198 13 223.5 15 164 10 6 M8 125 90 100 41.3 21.5

63 / 100 A-B 200 60 250 42 342 307 372 155 172 65 100 63 200 14 232 17 162 12 6 M8 142 90 100 45.3 21.5

63 / 125 A-B 235 60 286 48 400 350 425 180 200 65 125 63 230 15 252.5 19 190 14 6 M8 156 90 100 51.8 21.5

80 / 125 A-B 235 61 286 48 400 350 447 180 200 90 125 80 230 15 260 19 190 14 8 M8 156 110 122 51.8 27

80 / 150 A-B 260 61 320 55 458 395 502 190 230 90 150 80 250 19 265 20 210 16 8 M8 155 110 122 59.3 27

90 / 150 A-B 260 75 320 55 458 395 523 190 230 107 150 90 250 19 312 20 210 16 8 M8 155 125 143 59.3 27

Serie Modulare - A/B Modular Series - A/B Série Modulaire - A/B

SIZE A B1 C D (H7)

EE2 G1 H H3 I I2 L O Q5 S K b b1 f

hh1 h2 t t1

Ver. AVer. B A / B

30 / 30 A-B 52 30 70 14 105 94 135 60 52 41.5 30 30 80 5.5 97 6 66 5 3 M4 38 38 53 16.3 10.5

30 / 40 A-B 70 30 98 19 138 115 164 82 71 41.5 40 30 104 7 110 7 84 6 3 M4 56 38 53 21.8 10.5

30 / 50 A-B 85 30 112 24 165 140 188 98 85 41.5 50 30 120 9 120 8 99/101 8 3 M4 68 38 53 27.3 10.5

40 / 50 A-B 85 41 112 24 165 140 202 98 85 42 50 40 120 9 130 8 99/101 8 4 M5 68 56 67 27.3 12.5

40 / 61 A-B 120 41 170 25 215 140 245 120 115 42 63 40 145 11 158 10 116 8 4 M5 90 56 67 28.3 12.5

40 / 63 A-B 120 41 170 28 215 182 245 120 115 42 63 40 145 11 158 10 116 8 4 M5 90 56 67 31.3 12.5

40 / 80 A-B 140 41 190 32 257 226 282 122 135 42 80 40 166 12 157 12 136/144 10 4 M5 110 56 67 35.3 12.5

50 / 61 A-B 120 49 170 25 215 182 258 120 115 53 63 50 145 11 186.5 10 116 8 5 M6 90 68 80 28.3 16

50 / 63 A-B 120 49 170 28 215 182 258 120 115 53 63 50 145 11 186.5 10 116 8 5 M6 90 68 80 31.3 16

50 / 80 A-B 140 49 190 32 257 226 295 122 135 53 80 50 166 12 190 12 136/144 10 5 M6 110 68 80 35.3 16

Serie Pesante - A/B Strong Series - A/B Série Forte - A/B

MRVCRiduttori a Vite Senza Fine.





A B

A B



29

SIZE B B1 D(H7) D1(j6) G1 h H2 H3 I I2 Q2 Q5 KA KB KC KM KN KO KP KQ b b1 f p t t1 y

50 / 90 F 30 49 38 14 150 125 68 53 90 50 104 210 127 16 5 215 180 14 250 210 10 5 M6 202 41.3 16 30

50 / 100 F 30 49 42 14 155 142 68 53 100 50 104 218.5 150 13 6 215 180 14 250 210 12 5 M6 227.5 45.3 16 30

63 / 90 F 40 60 38 19 150 125 90 65 90 63 137 223.5 127 16 5 215 180 14 250 210 10 6 M8 202 41.3 21.5 37

63 / 100 F 40 60 42 19 155 142 90 65 100 63 137 232 150 13 6 215 180 14 250 210 12 6 M8 227.5 45.3 21.5 37

63 / 125 F 40 60 48 19 180 156 90 65 125 63 137 252.5 150 15 6 265 230 15 300 256 14 6 M8 240 51.8 21.5 37

80 / 125 F 50 61 48 24 180 156 110 90 125 80 165 260 150 15 6 265 230 15 300 256 14 8 M8 240 51.8 27 42

80 / 150 F 50 61 55 24 190 155 110 90 150 80 165 265 160 20 6 300 250 19 350 270 16 8 M8 255 59.3 27 42

90 / 150 F 50 75 55 24 190 155 125 107 150 90 181 312 160 20 6 300 250 19 350 270 16 8 M8 255 59.3 27 53

Flange tipo F1 - vedere a pagina 46 Output flanges types F1 - see page 46 Brides type F1 - à la page 46

Serie Modulare - FL Modular Series - FL Série Modulaire - FL

SIZE B B1 D(H7) D1(j6) G1 h H2 H3 I I2 Q2 Q5 KA KB KC KM KN KO KP KQ b b1 f p t t1 y

30 / 30 F 20 30 14 9 60 38 38 41.5 30 30 71 97 65 6 3 56 40 5.5 70 - 5 3 M4 95 16.3 10.5 23

30 / 40 F 20 30 19 9 82 56 38 41.5 40 30 71 110 82 10 4 115 95 8.5 140 106 6 3 M4 123 21.8 10.5 23

30 / 50 F 20 30 24 9 98 68 38 41.5 50 30 71 120 91.5 10 4 125/135 110 10 160 125 8 3 M4 140.5 27.3 10.5 23

40 / 50 F 22 41 24 11 98 68 56 42 50 40 86 130 91.5 10 4 125/135 110 10 160 125 8 4 M5 140.5 27.3 12.5 27

40 / 61 F 22 41 25 11 120 90 56 42 63 40 86 158 111 9 5 165 130 13 200 154 8 4 M5 171 28.3 12.5 27

40 / 63 F 22 41 28 11 120 90 56 42 63 40 86 158 111 9 5 165 130 13 200 154 8 4 M5 171 31.3 12.5 27

40 / 80 F 22 41 32 11 122 110 56 42 80 40 86 157 100 13 6 165 130 11 200 155 10 4 M5 161 35.3 12.5 27

50 / 61 F 30 49 25 14 120 90 68 53 63 50 104 186.5 111 9 5 165 130 13 200 154 8 5 M6 171 28.3 16 30

50 / 63 F 30 49 28 14 120 90 68 53 63 50 104 186.5 111 9 5 165 130 13 200 154 8 5 M6 171 31.3 16 30

50 / 80 F 30 49 32 14 122 110 68 53 80 50 104 190 100 13 6 165 130 11 200 155 10 5 M6 161 35.3 16 30

Serie Pesante - A/B Strong Series - A/B Série Forte - A/B








MRVC - RVC

n1=1400 (NEWTONS)

SIZE

Ratio 60:1 80:1 100:1 120:1 160:1 200:1 250:1 300:1 350:1 400:1 450:1 560:1 600:1

n2 23.3 17.5 14 11.7 8.8 7 5.6 4.7 4 3.5 3.1 2.5 2.3

30

FR 1000 1000 1000 1050 1100 1100 1100 1100 1100 1100 - - -

FA 250 250 250 250 260 275 275 275 275 275 - - -

Fr 120 130 139 148 153 160 165 168 172 172 - - -

Fa 30 32 35 37 38 40 41 42 43 43 - - -

40 - 4

FR 1900 1900 1900 1900 2000 2000 2100 2100 2100 2100 - - -

FA 470 470 470 470 500 500 520 520 520 520 - - -

Fr 160 160 160 160 165 172 187 193 200 200 - - -

Fa 40 40 40 40 41 43 46 48 50 50 - - -

50 - 5

FR 2900 2950 3050 3050 3050 30500 3100 3100 3100 3150 3200 3250 3350

FA 720 730 760 760 760 760 770 770 770 780 800 810 830

Fr 220 230 240 255 272 280 280 290 290 310 310 360 360

Fa 55 57 60 63 68 70 70 72 72 77 77 90 90

61 - 63 - 7

FR 4000 4050 4100 4150 4150 4200 4250 4250 4300 4300 4400 4500 4600

FA 1000 1010 1020 1030 1030 1050 1060 1060 1070 1070 1100 1120 1150

Fr 220 230 240 255 272 280 280 290 290 310 310 360 360

Fa 55 57 60 63 68 70 70 72 72 77 77 90 90

80 - 8

FR 5500 2600 2700 5800 5800 5800 5800 6000 6000 6050 60500 6050 6100

FA 1370 1400 1420 1450 1450 1450 1450 1500 1500 1510 1510 1510 1520

Fr 240 250 255 280 300 320 328 355 375 395 405 420 420

Fa 60 62 63 70 75 80 82 88 93 98 101 105 105

90

FR 6360 6450 6800 7030 7150 7300 7400 7500 7600 7700 7800 7950 8100

FA 1590 1610 1700 1750 1780 1820 1850 1870 1900 1920 1950 1980 2020

Fr 240 250 270 310 335 360 380 405 425 440 460 480 480

Fa 60 62 67 77 83 90 95 101 106 110 115 120 120

100

FR 7220 7500 7950 8280 8350 8500 8700 8700 8800 8850 8850 8250 9150

FA 1800 1870 1980 2060 2080 2120 2170 2170 2200 2210 2230 2310 2280

Fr 300 320 340 360 380 400 435 460 475 490 505 520 520

Fa 75 80 85 90 95 100 108 115 118 122 126 130 130

125

FR 10100 10150 10225 10350 10450 10550 10700 10700 10800 10900 11000 11225 11600

FA 2520 2530 2550 2580 2610 2630 2670 2670 2700 2720 2750 2800 2900

Fr 375 390 405 440 470 500 505 550 580 610 635 650 650

Fa 93 97 101 110 117 125 128 137 145 152 158 162 162

150

FR 13200 13500 14000 14500 14850 15300 15800 15900 16000 16150 16300 16525 16800

FA 3300 3370 3500 3620 3710 3820 3950 3970 4000 4030 4070 4130 4200

Fr 390 405 425 525 550 600 650 715 820 845 875 900 900

Fa 97 101 106 131 137 150 162 178 205 211 218 225 225

30

Carichi sugli assi. Axial and radial shaft loads. Charges admissibles sur les arbres.

MRVP - RVPRiduttori a Vite Senza Fine.








Service Factor (Fs)


KW TYPERapporto / Ratio / Réduction

Kg FP60:1 80:1 100:1 120:1 161:1 200:1 250:1 298:1 350:1 400:1 451:1 500:1

0.06

MRVP 30

23.3 17.5 14 11.7 8.7 7.0 5.6 4.7 3.5 3.11

6.519 26 32 34 41 51 54 64 74 72

1.5 1.1 0.95 0.77 0.53 0.43 0.48 0.39 0.30 0.33

MRVP 40MRV 4

23.3 17.5 14 11.7 8.7 7.0 5.6 4.77.710.119 23 29 31 41 51 64 66

3.3 3.2 2.7 2.5 1.8 1.5 1.07 0.88

0.09

MRVP 30

23.3

6.729

1.04

MRVP 40MRVP 4

23.3 17.5 14 11.7 8.7 7.07.910.329 35 43 47 62 76

2.2 2.2 1.86 1.68 1.2 1.0

0.18

MRVP 40MRVP 4

23.3 17.5 14 11.79.61258 70 86 94

1.1 1.1 0.93 0.84

MRVP 50MRVP 5

23.3 17.5 14 11.7 8.7 7.012.416.659 71 82 97 136 157

2.0 2.0 1.6 1.7 1.2 1.2

MRVP 61MRVP 63MRVP 7

14 11.7 8.7 7.0 5.6 4.7 4.0 3.515.715.722.4

86 100 139 162 196 213 249 270

2.7 3.0 2.3 1.9 1.37 1.1 1.1 0.92

0.25

MRVP 50MRVP 5

23.3 17.5 14 11.7 8.7 7.013.517.782 98 114 135 188 218

1.47 1.48 1.1 1.26 0.9 0.88


23.3 17.5 14 11.7 8.7 7.0 5.6 4.7 4.016.816.819.2

83 101 119 139 194 225 273 297 346

2.8 3.4 2.0 2.1 1.7 1.4 1.0 0.8 0.8

0.37

MRVP 50MRVP 5

23.3 17.5 14 11.714.418.6121 145 169 200

1.0 1.0 0.8 0.85


23.3 17.5 14 11.7 8.7 7.017.717.724.4

123 149 177 206 287 333

1.9 2.3 1.36 1.46 1.13 0.93

MRVP 80MRVP 8

23.3 17.5 14 11.7 8.7 7.0 5.6 4.7 4.025.233.9124 149 174 203 287 328 416 439 512

3.3 3.3 2.7 2.5 2.1 1.7 1.2 1.0 0.82

0.55


23.3 17.5 14 11.720.420.427.1

182 222 263 306

1.3 1.6 0.9 1.0

MRVP 80MRVP 8

23.3 17.5 14 11.7 8.7 7.0 5.627.936.6185 222 259 302 426 488 619

2.3 2.25 1.8 1.7 1.4 1.17 0.82

MRVP 90

14 11.7 8.7 7.0 5.6 4.7

40.5259 306 474 488 563 720

2.4 2.2 1.4 1.6 1.1 0.86




31

Selezione MRVP. MRVP Selection. Sélection MRVP.



MRVP




Service Factor (Fs)



Kg FP60:1 80:1 100:1 120:1 161:1 200:1 250:1 298:1 350:1 400:1 451:1 500:1

0.75


23.3 17.521.421.428.1

249 303

1.0 1.16

MRVP 80MRVP 8

23.3 17.5 14 11.7 8.7 7.028.937.6252 303 353 411 581 665

1.6 1.6 1.35 1.25 1.03 0.86

MRVP 90

23.3 17.5 14 11.7 8.7 7.0 5.6

41.5243 315 353 417 647 665 767

2.1 1.6 1.8 1.65 1.0 1.2 0.8

MRVP 100

17.5 14 11.7 8.7 7.0 5.6 4.7

55.6311 358 417 589 675 844 1012

2.9 2.3 2.1 1.8 1.57 1.07 0.86

1.1


17.522.422.429.1

444

0.8

MRVP 80MRVP 8

23.3 17.5 14 11.731.640.3369 444 518 603

1.14 1.13 0.92 0.85

MRVP 90

23.3 17.5 14 11.7 7.0

44.2356 462 518 612 975

1.4 1.1 1.2 1.13 0.81

MRVP 100

23.3 17.5 14 11.7 8.7 7.0

58.3374 456 525 612 864 990

2.0 2.0 1.6 1.5 1.2 1.07

MRVP 125

17.5 14 11.7 8.7 7.0 5.6 4.7 4.0 3.1

92.7456 555 657 864 1051 1257 1397 1602 1993

3.4 2.8 2.6 2.0 1.8 1.28 1.0 0.88 0.80

MRVP 150

7.0 5.6 4.7 4.0 3.5 3.1 2.8

110.71096 1294 1507 1733 1921 2196 2289

3.0 2.0 1.65 1.2 1.2 1.23 0.8

1.5

MRVP 80MRVP 8

23.3 17.534.643.3503 606

0.83 0.83

MRVP 90

23.3 17.5 14 11.7

47.2485 630 706 835

1.05 0.8 0.9 0.83

MRVP 100

23.3 17.5 14 11.7 8.7 7.0

61.3510 622 716 835 1179 1351

1.5 1.46 1.2 1.1 0.9 0.8

MRVP 125

23.3 17.5 14 11.7 8.7 7.0 5.6

95.7516 622 757 896 1179 1433 1714

2.5 2.5 2.1 1.9 1.5 1.3 0.94

MRVP 150

11.7 8.7 7.0 5.6 4.7 4.0 3.5 3.1

113.7933 1228 1494 1765 2055 2364 2619 2994

3.0 2.4 2.2 1.5 1.2 1.1 0.9 0.9




32


MRVPRiduttori a Vite Senza Fine.





Service Factor (Fs)



Kg FP60:1 80:1 100:1 120:1 161:1 200:1 250:1 298:1 350:1 400:1 451:1 500:1

2.2

MRVP100

23.3 17.5 14

101.7747 912 1051

1.0 1.0 0.8

MRVP125

23.3 17.5 14 11.7 8.7 7.0

136.1756 912 1111 1314 1729 2101

1.7 1.7 1.44 1.3 1.04 0.9

MRVP150

23.3 17.5 14 11.7 8.7 7.0 5.6 4.7

154.1765 996 1156 1368 1801 2191 2589 3014

2.8 2.4 2.3 2.1 1.7 1.5 1.0 0.82

3.0

MRVP125

23.3 17.5 14 11.7

105.01032 1244 1514 1792

1.26 1.25 1.06 0.95

MRVP150

23.3 17.5 14 11.7 8.7 7.0

1231044 1359 1576 1866 2456 2988

2.0 1.8 1.67 1.5 1.23 1.12

4.0

MRVP125

23.3 17.5 14

112.71375 1659 2019

0.95 0.93 0.8

MRVP150

23.3 17.5 14 11.7 8.7 7.0

130.71392 1812 2101 2488 3274 3984

1.55 1.35 1.25 1.14 0.92 0.84

5.5 MRVP150

23.3 17.5 14 11.7

1481914 2491 2889 3421

1.13 1.0 0.91 0.83

7.5 MRVP150

23.3

1622610

0.83




33




MRVP

SIZE

Rapporto / Ratio / RéductionKg FP

60:1 80:1 100:1 120:1 160:1 200:1 250:1 300:1 350:1 400:1 450:1 500:1 560:1 610:1

RVP30

i EXACT

61.20 76.50 98.00 117.60 156.80 208.00 260.00 312.00 416.00 488.00

4.1

n1 = 1400

23.3 18.7 13.7 11.5 8.6 7.1 5.7 4.7 3.37 2.87

0.09 0.07 0.06 0.05 0.03 0.03 0.03 0.02 0.02 0.02

30 28 30 26 22 22 26 25 22 24

78% 78% 77% 69% 63% 62% 53% 52% 45% 44%

n1 = 900

15 12 8.8 7.4 5.5 4.6 3.7 3.0 2.16 1.84

0.07 0.05 0.04 0.03 0.02 0.02 0.02 0.02 0.01 0.01

33 30 33 27 23 24 29 28 25 25

76% 76% 75% 67% 61% 60% 51% 50% 43% 42%

n1 = 500

8.3 6.6 4.9 4.1 3.1 2.5 2.0 1.7 1.20 1.02

0.04 0.03 0.025 0.018 0.013 0.012 0.014 0.011 0.009 0.007

36 32 35 28 24 26 31 30 28 27

74% 74% 73% 65% 59% 58% 49% 48% 41% 40%

RVP40

RVP4

i EXACT

61.20 76.50 98.00 117.60 156.80 208.00 260.00 312.00 416.00 488.00

5.3

7.7

n1 = 1400

23.3 18.7 13.7 11.5 8.6 7.1 5.7 4.7 3.37 2.87

0.19 0.21 0.17 0.15 0.11 0.09 0.06 0.05 0.04 0.03

67 76 80 79 76 77 69 58 50 50

77% 71% 70% 64% 63% 62% 63% 54% 47% 47%

n1 = 900

15 12 8.8 7.4 5.5 4.6 3.7 3.0 2.16 1.84

0.13 0.14 0.12 0.1 0.08 0.06 0.04 0.03 0.03 0.02

67 80 84 83 80 81 72 61 53 53

77% 68% 68% 62% 61% 60% 61% 52% 45% 45%

n1 = 500

8.3 6.6 4.9 4.1 3.1 2.5 2.0 1.7 1.20 1.02

0.08 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.02 0.01

70 83 87 86 83 84 75 63 55 55

75% 67% 66% 60% 59% 58% 59% 50% 43% 43%

RVP50

RVP5

i EXACT

62.00 77.50 107.40 137.10 152.25 204.00 243.60 304.50 340.00 408.00 437.50 487.20 525.00 609.00

8.1

12.3

n1 = 1400

22.6 18 13 10.2 9.2 6.8 5.7 4.6 4.1 3.4 3.2 2.85 2.7 2.3

0.35 0.38 0.28 0.28 0.23 0.21 0.13 0.10 0.09 0.07 0.08 0.06 0.05 0.05

120 145 135 170 167 191 140 117 118 108 140 92 101 79

80% 72% 67% 66% 69% 64% 63% 58% 57% 53% 56% 47% 52% 41%

n1 = 900

14.5 11.6 8.4 6.5 5.9 4.4 3.7 3.0 2.6 2.2 2.0 1.85 1.7 1.5

0.24 0.26 0.19 0.19 0.16 0.15 0.09 0.07 0.06 0.05 0.06 0.04 0.04 0.03

124 152 142 179 175 201 147 123 124 113 147 97 106 83

78% 70% 65% 64% 67% 62% 61% 56% 55% 50% 54% 45% 50% 39%

n1 = 500

8.0 6.4 4.6 3.6 3.3 2.4 2.0 1.6 1.4 1.2 1.1 1.0 0.95 0.8

0.14 0.15 0.11 0.11 0.09 0.08 0.05 0.04 0.04 0.03 0.03 0.02 0.02 0.02

125 151 140 177 174 199 146 122 123 112 146 96 105 82

76% 68% 63% 62% 65% 60% 59% 54% 53% 49% 52% 43% 48% 37%

34

Selezione RVP. RVP Selection. Sélection RVP.





RVPRiduttori a Vite Senza Fine.


SIZE


60:1 80:1 100:1 120:1 160:1 200:1 250:1 300:1 350:1 400:1 450:1 500:1 560:1 610:1

RVP63

RVP61

RVP7

i EXACT

62.00 77.50 107.40 137.10 152.25 204.00 243.60 304.50 340.00 408.00 437.50 487.20 525.00 609.00

11.4

11.4

18.1

n1 = 1400

22.6 18 13 10.2 9.2 6.8 5.7 4.6 4.1 3.4 3.2 2.82 2.7 2.3

0.69 0.89 0.47 0.47 0.44 0.34 0.25 0.2 0.2 0.16 0.17 0.12 0.11 0.08

235 350 240 300 325 310 270 235 274 249 280 191 210 150

81% 74% 70% 68% 71% 66% 64% 58% 58% 55% 56% 48% 53% 43%

n1 = 900

14.5 11.6 8.4 6.5 5.9 4.4 3.7 3.0 2.6 2.2 2.0 1.85 1.7 1.5

0.47 0.61 0.32 0.32 0.30 0.23 0.17 0.13 0.14 0.11 0.12 0.08 0.08 0.06

242 361 247 309 335 319 278 242 282 256 288 197 216 155

79% 72% 68% 66% 69% 64% 62% 56% 56% 53% 54% 46% 51% 41%

n1 = 500

8.0 6.4 4.6 3.6 3.3 2.4 2.0 1.6 1.4 1.2 1.1 1.0 0.95 0.8

0.27 0.35 0.19 0.19 0.17 0.13 0.10 0.08 0.08 0.07 0.07 0.05 0.04 0.03

242 361 247 309 335 319 278 242 282 256 288 197 216 155

79% 72% 68% 66% 69% 64% 62% 56% 56% 53% 54% 46% 51% 41%

RVP80

RVP8

i EXACT

62.00 77.50 107.40 137.10 152.25 204.00 243.60 304.50 340.00 408.00 437.50 487.20 525.00 609.00

18.9

27.6

n1 = 1400

22.6 18 13 10.2 9.2 6.8 5.7 4.6 4.1 3.4 3.2 2.85 2.7 2.3

1.21 1.28 0.94 0.82 0.81 0.63 0.46 0.36 0.31 0.22 0.29 0.20 0.18 0.16

420 500 475 515 600 570 505 430 420 379 490 336 385 286

82% 74% 69% 67% 71% 65% 66% 58% 58% 62% 56% 50% 60% 44%

n1 = 900

14.5 11.6 8.4 6.5 5.9 4.4 3.7 3.0 2.6 2.2 2.0 1.85 1.7 1.5

0.89 0.95 0.07 0.61 0.60 0.47 0.37 0.27 0.23 0.16 0.22 0.15 0.13 0.12

470 560 532 577 672 638 566 482 470 424 549 376 431 320

80% 72% 67% 65% 69% 63% 64% 56% 56% 60% 54% 48% 58% 42%

n1 = 500

8.0 6.4 4.6 3.6 3.3 2.4 2.0 1.6 1.4 1.2 1.1 1.0 0.95 0.8

0.55 0.58 0.43 0.38 0.37 0.29 0.21 0.17 0.14 0.10 0.14 0.09 0.08 0.07

508 605 575 623 726 689 611 520 508 458 593 406 466 346

78% 70% 65% 63% 67% 61% 62% 54% 54% 58% 52% 46% 56% 40%

RVP90

i EXACT

62.00 77.50 107.40 137.10 152.25 204.00 243.60 304.50 340.00 408.00 437.50 487.20 525.00 609.00

31.5

n1 = 1400

22.6 16.7 13 10.2 9.2 6.8 5.7 4.6 4.1 3.4 3.2 2.85 2.7 2.3

1.53 1.13 1.25 1.08 0.79 0.87 0.61 0.47 0.44 0.35 0.36 0.28 0.28 0.21

510 500 630 690 650 788 609 618 636 590 660 422 578 399

79% 77% 69% 68% 79% 65% 60% 64% 63% 60% 62% 45% 58% 46%

n1 = 900

14.5 10.7 8.4 6.5 5.9 4.4 3.7 3.0 2.6 2.2 2.0 1.85 1.7 1.5

1.11 0.82 0.91 0.79 0.58 0.64 0.45 0.34 0.32 0.26 0.26 0.21 0.20 0.15

561 550 693 759 715 867 670 680 700 649 726 464 636 439

77% 75% 67% 66% 77% 63% 58% 62% 61% 58% 60% 43% 56% 44%

n1 = 500

8.0 6.0 4.6 3.6 3.3 2.4 2.0 1.6 1.4 1.2 1.1 1.0 0.95 0.8

0.68 0.51 0.56 0.49 0.35 0.39 0.28 0.21 0.20 0.16 0.16 0.13 0.13 0.10

606 594 748 820 772 936 723 734 756 701 784 501 687 474

75% 73% 65% 64% 75% 61% 56% 60% 59% 56% 58% 41% 54% 42%

35








RVP

SIZE


60:1 80:1 100:1 120:1 160:1 200:1 250:1 300:1 350:1 400:1 450:1 500:1 560:1 610:1

RVP100

i EXACT

62.00 77.50 107.40 137.10 152.25 204.00 243.60 304.50 340.00 408.00 437.50 487.20 525.00 609.00

45.6

n1 = 1400

22.6 18 13 10.2 9.2 6.8 5.7 4.6 4.1 3.4 3.2 2.85 2.7 2.3

2.18 2.26 1.66 1.43 1.40 1.15 0.82 0.64 0.57 0.39 0.47 0.36 0.32 0.27

765 910 850 908 1050 1060 900 873 872 700 903 612 722 522

83% 76% 70% 68% 72% 66% 66% 66% 66% 64% 64% 51% 63% 46%

n1 = 900

14.5 11.6 8.4 6.5 5.9 4.4 3.7 3.0 2.6 2.2 2.0 1.85 1.7 1.5

1.58 1.64 1.21 1.04 1.02 0.84 0.60 0.46 0.42 0.29 0.35 0.27 0.23 0.20

842 1001 935 999 1155 1166 990 960 959 770 993 673 794 574

81% 74% 68% 66% 70% 64% 64% 64% 64% 62% 62% 49% 61% 44%

n1 = 500

8.0 6.4 4.6 3.6 3.3 2.4 2.0 1.6 1.4 1.2 1.1 1.0 0.95 0.8

0.97 1.01 0.75 0.64 0.63 0.52 0.37 0.29 0.26 0.18 0.21 0.17 0.15 0.13

909 1081 1010 1079 1247 1259 1069 1037 1036 832 1073 727 858 620

79% 72% 66% 64% 68% 62% 62% 62% 62% 60% 60% 47% 59% 42%

RVP125

i EXACT

62.00 77.50 107.40 137.10 152.25 204.00 243.60 304.50 340.00 408.00 437.50 487.20 525.00 609.00

80

n1 = 1400

24.1 19.3 13.2 10.7 8.3 6.8 6.2 5.0 4.1 3.4 3.2 2.9 2.7 2.3

3.91 4.12 3.00 2.60 2.17 1.91 1.57 1.14 0.99 0.68 0.90 0.71 0.55 0.49

1300 1550 1600 1700 1792 1867 1613 1349 1403 1235 1550 1100 1260 953

84% 76% 74% 73% 72% 70% 67% 62% 61% 65% 59% 48% 64% 47%

n1 = 900

15.5 12.4 8.5 6.8 5.3 4.4 4.0 3.2 2.6 2.2 2.1 1.9 1.7 1.5

2.83 2.99 2.18 1.89 1.58 1.39 1.15 0.83 0.72 0.50 0.66 0.52 0.40 0.36

1430 1705 1760 1870 1971 2054 1774 1484 1543 1359 1705 1210 1386 1048

82% 74% 72% 71% 70% 68% 65% 60% 59% 63% 57% 46% 62% 45%

n1 = 500

8.6 6.9 4.7 3.8 3.0 2.4 2.2 1.8 1.4 1.2 1.1 1.0 0.95 0.8

1.74 1.85 1.35 1.17 0.97 0.86 0.71 0.52 0.45 0.31 0.41 0.33 0.25 0.23

1544 1841 1900 2020 2129 2218 1916 1603 1667 1467 1841 1307 1497 1132

80% 72% 70% 69% 68% 66% 63% 58% 57% 61% 55% 44% 60% 43%

RVP150

i EXACT

56.40 87.40 99.90 131.10 165.00 213.60 220.00 275.00 356.00 414.00 427.20 440.00 550.00 569.00

98

n1 = 1400

24.8 16.0 14.0 10.7 8.5 6.5 6.4 5.1 3.9 3.4 3.3 3.2 2.5 2.4

6.58 4.95 5.01 4.16 3.58 3.15 2.49 1.98 1.61 1.24 1.47 0.99 0.83 0.83

2154 2451 2629 2827 3024 3353 2580 2483 2597 2313 2700 1819 1646 1922

85% 83% 77% 76% 75% 73% 69% 67% 66% 64% 65% 61% 53% 60%

n1 = 900

15.9 10.3 9.0 6.8 5.4 4.2 4.1 3.3 2.5 2.2 2.1 2.0 1.6 1.5

4.77 3.59 3.64 3.02 2.60 2.29 1.81 1.44 1.17 0.91 1.07 0.73 0.61 0.60

2369 2696 2892 3110 3226 3688 2838 2731 2837 2544 2970 2001 1811 2114

83% 81% 75% 74% 73% 71% 67% 65% 64% 62% 63% 59% 51% 58%

n1 = 500

8.8 5.7 5.0 3.8 3.0 2.3 2.2 1.82 1.4 1.2 1.15 1.1 0.9 0.8

3.0 2.21 2.24 1.86 1.60 1.41 1.12 0.89 0.73 0.56 0.66 0.45 0.38 0.38

2599 2911 3123 3358 3593 3983 3065 2950 3064 2748 3208 2161 1955 2283

81% 79% 73% 72% 71% 69% 65% 63% 62% 60% 61% 57% 49% 56%

36






RVPRiduttori a Vite Senza Fine.


A B V FP F

B3

V5

V6

B8

B6

B7

37


Posizioni di montaggio. Mounting positions. Positions de montage.



MRVP - RVP

38

SIZE IECN M P Q Q1

B5 B14 B5 B14 B5 B14 B5 B14 B5 B14

3056 - 50 - 65 - 80 - 105 - 57

63 - 60 - 75 - 90 - 105 - 57

4056 - 60 - 75 - 90 - 109 - 57

63 95 60 115 75 140 90 109 109 57 57

5063 95 60 115 75 140 90 153 153 91 91

71 110 70 130 85 160 105 153 154 91 92

61 - 6371 110 70 130 85 160 105 172 173 91 92

80 130 80 165 100 200 120 183 185 98 94

80

71 110 70 130 85 160 105 220 220 120 120

80 130 80 165 100 200 120 220 221 120 121

90 130 95 165 115 200 140 220 220 120 120

Dimensioni PAM. IEC Dimensions. Dimensions IEC.

SIZE IECN M P Q Q1

B5 B14 B5 B14 B5 B14 B5 B14 B5 B14

456 - 60 - 75 - 90 - 109 - 57

63 95 60 115 75 140 90 109 109 57 57

563 95 60 115 75 140 90 153 153 91 91

71 110 70 130 85 160 105 153 154 91 92

771 110 70 130 85 160 105 172 173 91 92

80 130 80 165 100 200 120 183 185 98 94

8

71 110 70 130 85 160 105 220 220 120 120

80 130 80 165 100 200 120 220 221 120 121

90 130 95 165 115 200 140 220 220 120 120

9080 130 80 165 100 200 120 240 241 120 121

90 130 95 165 115 200 140 240 240 120 120

10080 130 80 165 100 200 120 245 246 120 121

90 130 95 165 115 200 140 245 245 120 120

12590 130 95 165 115 200 140 287 290 141 144

100/112 180 - 215 - 250 - 300 - 154 -

150

90 130 - 165 - 200 - 310 - 165 -

100/112 180 - 215 - 250 - 310 - 165 -

132 230 - 265 - 300 - 332 - 187 -

MRVPRiduttori a Vite Senza Fine.


Serie Modulare Modular Series Série Modulaire

Serie Pesante Strong Series Série Forte

39

SIZE B D(H7)

D1(j6) E1 G1 h H1 I I1 M N N1 P Q3 Q4 V W X KE b b1 f g t t1

4 FP 23 19 11 109 82 56 42 40 34 65 50 34 77 104 52 43 16 86 M6 6 4 M5 2 21.8 12.5

5 FP 30 24 14 133 98 68 52.5 50 40.4 85 70 40 96 147 85 46 20 99 M8 8 5 M6 2.5 27.3 16

7 FP 40 28 19 165 120 90 65 63 40.4 100 80 51.5 122 166 85 46 13 99 M8 8 6 M8 4.5 31.3 21.5

8 FP 50 32 24 212 122 110 90 80 50.4 130 110 52 168 216 116 59 18 128 M10 10 8 M8 4 35.3 27

90 FP 50 38 24 250 150 125 107 90 50.4 130 110 71.5 160 236 116 59 7 128 M10 10 8 M8 3.5 41.3 27

100 FP 60 42 28 305 155 142 135 100 50.4 165 130 74 200 241 116 59 -10 128 M12 12 8 M8 3.5 45.3 31

125 FP 80 48 38 350 180 156 150 125 66.8 215 180 78.5 268 283.5 137.5 71 -1 158 M12 14 10 M8 11.5 51.8 41

150 FP 100 55 42 393 190 155 165 150 82.3 230 200 88 270 304.5 159.5 61 9 166 M14 16 12 M8 5 59.3 45

SIZE B C1D

(H7)D1

(j6) E1 G1 h H1 I I1 M N N1 N2 P Q3 Q4 V W X KO KE b b1 f g m t t1

30 FP 4 20 - 14 9 94 60 38 41.5 30 34 - - - 25 61.3 91 43 43 20 86 M5 - 5 3 M4 4 75 16.3 10.5

40 FP 23 84 19 11 109 82 56 42 40 34 65 50 34 38.4 77 104 52 43 16 86 M6 M6 6 4 M5 2 96 21.8 12.5

50 FP 30 105 24 14 133 98 68 52.5 50 40.4 85 70 40 46.5 96 147 85 46 20 99 M8 M8 8 5 M6 2.5 120 27.3 16

61 FP 40 130 25 19 165 120 90 65 63 40.4 85 70 51.5 57.5 122 166 85 46 13 99 M8 M8 8 6 M8 2.5 148 28.3 21.5

63 FP 40 130 28 19 165 120 90 65 63 40.4 100 80 51.5 54 122 166 85 46 13 99 M8 M8 8 6 M8 4.5 148 31.3 21.5

80 FP 50 180 32 24 212 122 110 90 80 50.4 130 110 52 56.5 168 216 116 59 18 128 M8 M10 10 8 M8 4 190 35.3 27

30



40 - 80







MRVP - RVP

40

SIZE A B C D(H7)

D1(j6) E G1 H I I1 L O Q3 Q4 S V W X K b b1 f h n t t1

4 A 70 23 98 19 11 138 82 71 40 34 104 7 104 52 7 43 16 86 84 6 4 M5 56 25 21.8 12.5

5 A 85 30 112 24 14 165 98 85 50 40.4 120 9 147 85 8 46 20 99 99/101 8 5 M6 68 28 27.3 16

7 A 120 40 170 28 19 215 120 115 63 40.4 145 11 166 85 10 46 13 99 116 8 6 M8 90 30 31.3 21.5

8 A 140 50 190 32 24 257 122 135 80 50.4 166 12 216 116 12 59 18 128 136/144 10 8 M8 110 31 35.3 27

90 A 160 50 208 38 24 293 150 150 90 50.4 198 13 236 116 15 59 7 128 164 10 8 M8 125 44 41.3 27

100 A 200 60 250 42 28 342 155 172* 100 50.4 200 14 241 116 17 59 -10 128 162 12 8 M8 142 43 45.3 31

125 A 235 80 286 48 38 400 180 200* 125 66.8 230 15 283.5137.5 19 71 -1 158 190 14 10 M8 156 52 51.8 41

150 A 260 100 320 55 42 458 190 230* 150 82.3 250 19 304.5159.5 20 61 9 166 210 16 12 M8 155 56 59.3 45 * Su Versione “B” Tappo di scarico sotto i piedi *On version “B”, drain plug below feet *Pour la version “B” bouchon de vidange entre les pattes

Serie Modulare - A Modular Series - A Série Modulaire - A

Serie Pesante - A Strong Series - A Série Forte - A

SIZE A B C D(H7)

D1(j6) E G1 H I I1 L O Q3 Q4 S V W X K b b1 f h n t t1

30 A 52 20 70 14 9 105 60 52 30 34 80 5.5 91 43 6 43 20 86 66 5 3 M4 38 15 16.3 10.5

40 A 70 23 98 19 11 138 82 71 40 34 104 7 104 52 7 43 16 86 84 6 4 M5 56 25 21.8 12.5

50 A 85 30 112 24 14 165 98 85 50 40.4 120 9 147 85 8 46 20 99 99/101 8 5 M6 68 28 27.3 16

61 A 120 40 170 25 19 215 120 115 63 40.4 145 11 166 85 10 46 13 99 116 8 6 M8 90 30 28.3 21.5

63 A 120 40 170 28 19 215 120 115 63 40.4 145 11 166 85 10 46 13 99 116 8 6 M8 90 30 31.3 21.5

80 A 140 50 190 32 24 257 122 135 80 50.4 166 12 216 116 12 59 18 128 136/144 10 8 M8 110 31 35.3 27 * Su Versione “B” Tappo di scarico sotto i piedi *On version “B”, drain plug below feet *Pour la version “B” bouchon de vidange entre les pattes





MRVP - RVPRiduttori a Vite Senza Fine.



41

Serie Modulare - F Modular Series - F Série Modulaire - F



SIZE B D (H7)

D1(j6) G1 h H2 I I1 Q3 Q4 V W X KA KB KC KM KN KO KP KQ b b1 f p t t1 y

4 F 23 19 11 82 56 42 40 34 104 52 43 16 86 82 10 4 115 95 8.5 140 106 6 4 M5 123 21.8 12.5 27

5 F 30 24 14 98 68 52.5 50 40.4 147 85 46 20 99 91.5 10 4 125/135 110 10 160 125 8 5 M6 140.5 27.3 16 30

7 F 40 28 19 120 90 65 63 40.4 166 85 46 13 99 111 9 5 165 130 13 200 154 8 6 M8 171 31.3 21.5 37

8 F 50 32 24 122 110 90 80 50.4 216 116 59 18 128 100 13 6 165 130 11 200 155 10 8 M8 161 35.3 27 42

90 F 50 38 24 150 125 107 90 50.4 236 116 59 7 128 127 16 5 215 180 14 250 210 10 8 M8 202 41.3 27 53

100 F 60 42 28 155 142 135 100 50.4 241 116 59 -10 128 150 13 6 215 180 14 250 210 12 8 M8 227.5 45.3 31 70

125 F 80 48 38 180 156 150 125 66.8 283.5 137.5 71 -1 158 150 15 6 265 230 15 300 256 14 10 M8 240 51.8 41 75

150 F 100 55 42 190 155 165 150 82.3 304.5 159.5 61 9 166 160 20 6 300 250 19 350 270 16 12 M8 255 59.3 45 78

Flange tipo F1 - vedere a pagina 46 Output flanges types F1- see page 46 Brides type F1 - à la page 46

Serie Pesante - F Strong Series - F Série Forte - F




SIZE B D (H7)

D1(j6) G1 h H2 I I1 Q3 Q4 V W X KA KB KC KM KN KO KP KQ b b1 f p t t1 y

30 F 2O 14 9 60 38 41.5 30 34 91 43 43 20 86 65 6 3 56 40 5.5 70 - 5 3 M4 95 16.3 10.5 23

40 F 23 19 11 82 56 42 40 34 104 52 43 16 86 82 10 4 115 95 8.5 140 106 6 4 M5 123 21.8 12.5 27

50 F 30 24 14 98 68 52.5 50 40.4 147 85 46 20 99 91.5 10 4 125/135 110 10 160 125 8 5 M6 140.5 27.3 16 30

61 F 40 25 19 120 90 65 63 40.4 166 85 46 13 99 111 9 5 165 130 13 200 154 8 6 M8 171 28.3 21.5 37

63 F 40 28 19 120 90 65 63 40.4 166 85 46 13 99 111 9 5 165 130 13 200 154 8 6 M8 171 31.3 21.5 37

80 F 50 32 24 122 110 90 80 50.4 216 116 59 18 128 100 13 6 165 130 11 200 155 10 8 M8 161 35.3 27 42



MRVP - RVP

42

REDUCTEURS A VIS SANS FIN SERIE MS AVEC LIMITEUR DE COUPLE INTEGRE.

Le réducteur à vis sans fin avec limiteur de couple incorporé, est un réducteur avec un système de friction intégré que l’on peut règler de l’ extérieur, au moyen de l’écrou, afin de pouvoir faire varier le couple transmissible.La principale caractéristique est de pouvoir arrèter la rotation de l’arbre de sortie quand le couple résistant dépasse la valeur de tarage du limiteur de couple incorporé.Le limiteur de couple incorporé dans les réducteurs MS est constitué d’une friction à double cônes symétriques dans un bain d’huile situé sur l’arbre de sortie du réducteur, ce qui permet une grande précision et sensibilité de tarage. Ceci permet un réglage précis, une répétabilité dans le seuil de glissement du limiteur. La principale caractéristique des réducteurs et motoréducteurs de la série MS est celle d’avoir une basse pression spécifique de contact: en effet, en réalissant les deux cônes de friction directement sur la face intérieure en bronze, de la roue, le limiteur travaille de façon optimale pour avoir une pression spécifique de contact très basse.La faible pression spécifique entre le moyeu conique et la roue de la gamme MS permet de ne pas avoir à ré-étalonner le limiteur pendant la durée de vie du produit. L’utilisasion de matériaux de qualité et le fonctionnement constant dans un bain d’huile assurent une usure minimale.

ACCESSORIES

Il est impossible d’appliquer tous les accessoires de la série MRV sur les réducteurs de la serie MS.

PERFORMANCES

Les performances des réducteurs et des motoréducteurs de la série MRV avec limiteur de couple sont les mêmes que celles des réducteurs de la série MRV; et c’est pour cette raison que l’on demande de se réferer au catalogue général.

DÉTECTEURS D’ARRÊT DE SORTIE

Les détecteurs thermiques ou d’arrêt de rotation permettent de détecter l’arrêt de l’arbre de sortie. Ils servent à l’envoi de signal electronique pour arretêr automatiquement le système ou pour déclencher un voyant d’alerte.

RIDUTTORI A VITE SENZA FINE A MASSIMA SICUREZZA CON LIMITATORE DI COPPIA INCORPORATO E SENSORE ANTISLITTAMENTO.

Il riduttore di velocità con limitatore di coppia incorporato è un riduttore dotato di un sistema di frizione interna regolabile dall’esterno per mezzo della ghiera per poter variare la coppia trasmissibile.La caratteristica principale è di poter arrestare la rotazione dell’albero di uscita quando viene superata la coppia di taratura del limitatore salvaguardando i componenti della trasmissione e nello stesso tempo offrendo una grande sicurezza attiva per il personale addetto alle macchine.Il limitatore di coppia incorporato nei riduttori MS è costruito da una frizione in bagno d’olio a doppio cono simmetrico costruito sull’albero lento del riduttore, che consente una grande precisione e sensibilità di taratura e una costanza di intervento del limitatore in entrambi i sensi di rotazione. La caratteristica principale dei riduttori e motoriduttori della serie MS è quella di avere una bassa pressione specifica di contatto; realizzando infatti i due coni di frizione direttamente sulla superficie interna del bronzo della corona, il limitatore lavora con il materiale ottimale per avere una bassissima pressione specifica di contatto; inoltre con l’uso di olio sintetico si ha un funzionamento in slittamento con regime idrodinamico, non si ha quindi usura delle parti a contatto e non è necessario effettuare tarature successive durante la vita del riduttore.

ACCESSORI

Sui riduttori e motoriduttoridella serie MS è possibile applicare tutti gli accessori della serie MRV.

PRESTAZIONI

Le prestazioni dei riduttori e motoriduttori della serie MS sono le stesse della serie MRV.

RILEVATORE DI INTERVENTO DEL LIMITATORE, ALBERO LENTO FERMO

E’ disponibile un sensore, costituito da un trasduttore di pprossimità e da una centralina, che emette un segnale elettrico capace di segnalare l’intervento del limitatore di coppia; è quindi possibile fermare automaticamente il motore elettrico o installare comunque un segnalatore acustico o luminoso. Per maggiori informazioni contattare il nostro servizio tecnico.

ACCESSORIES

All of the normally available accessories on the MRV range can be used with the MS range.

PERFORMANCE

The performance of the MRV-MS range of worm gearboxes is the same as the MRV range.

OUTPUT SHAFT STALL DETECTORS

Thermal and shaft rotation detectors are available to detect the output shaft when it stops. This can be used to send an electrical signal to automatically stop the drive motor or to operate a warning light. Contact our technical department for further information.

MAXIMUM SAFETY WORM GEAR REDUCTION UNITS WITH INTEGRAL TORQUE LIMITER.

The speed reduction unit with integral torque limiter is equipped with an internal friction system which can be adjusted externally by means of a nut to vary transmissible torque.

The main characteristic is the ability to stop rotation of the low-speed shaft whenever the stall torque exceeds the calibrated value of the integral torque limiter, thus safeguarding the transmission components and at the same time offering optimum safety for the machine operator.

The built in torque limiter MS comprises a symmetrical cone on the output shaft acting against a hollow cone on the worm wheel all rotating in an oil bath. This gives precise adjustment, and consistency in the slipping point during torque overload.

The low contact pressure between the conical hub and the worm wheel of the MS range of worm gearboxes and worm geared motors make constant adjustment unnecessary during the life of the gearbox. With the use of quality materials, and by running consistently in a synthetic oil bath, wear is reduced to a minimum.

Limitatore di coppia MS®. MS® Torque limiter device. Limiteur de couple MS®.

MS®Dispositivo Limitatore di Coppia MS®.

MS® torque limiter device.Limiteur de couple MS®.

43

Al superamento della coppia predeterminata il dispositivo interviene automaticamente evitando qualsiasi danno alla macchina operatrice e alla catena cinematica conseguente, salvaguardando l’impianto da rotture o sovraccarichi. E’ estremamente utile nei movimenti dove è necessaria la sicurezza dell’uomo.Quando la frizione interviene slittando, il coefficiente di attrito passa da statico a dinamico, di conseguenza la coppia erogata e dissipata viene ridotta dall’80% al 50% a seconda della velocità, permettendo al gruppo di non surriscaldarsi anche in slittamento continuo. Quando il motore si arresta la frizione tra i coni e la corona ritorna al valore statico. In caso si voglia azionare la macchina è sufficiente allentare la ghiera esterna di registrazione e l’albero lento ruota liberocome se fosse folle.Per ritornare in condizioni operative basta riavvitare la ghiera nella precedente posizione.

TARATURA

I riduttori e motoriduttori della serie MS con limitatore di coppia incorporato vengono tarati in fabbrica alla coppia nominale di catalogo e ad una velocità di rotazione della vite di 1400 giri/min, volenda una diversa taratura seguire le seguinti istruzioni:

(1) Allentare completamente la ghiera(2) Riavvitare la ghiera fino a che le molle non sono più compresse.(3) Avvitare la ghiera del numero di giri (o frazioni di giri) indicati in tabellain funzione della coppia predeterminata.(4) In alternativa, per una taratura della massima precisione, avvitare la ghiera progressivamente e testare la coppia di slittamento da fermo azionando l’albero lento con chiave dinamometrica o torsiometro.

When the pre-determined torque is reached the torque limiter automatically comes into effect protecting machine from strain and breakage. It’s also extremely reliable where operator safety is concerned.

When the friction elements slip, the co-efficient of friction changes from static to dynamic and consequently the driving torque is reduced to between 80% to 50% depending on the speed, preventing overheating in the continuous slipping mode. When the main drive is stopped, the friction between the cones and the worm wheel reverts to the static value.

If the machine is needed to be turned by hand for adjustment purposes the external torque limiter adjusting nut can be released thus releasing the main drive. To return the drive re-tighten the nut to its previous position.

TORQUE SETTINGS

The MS range of worm gearboxes are set dur-ing the manufacture to the nominal torque shown in the catalogue at 1400 rpm. For other settings please follow these instructions:

(1) Loosen the nut completely.(2) Tighten the nut against the springs until it cannot be turned by hand.(3) Tighten the nut further by the number of turns or parts of a turn shown in the table below.(4) For a more precise adjustment tighten the nut and test the output torque for slipping at a precise value, using a torque wrench.

Si l’on dépasse le couple taré, le dispositif intervient automatiquement, et permet d’éviter les dommages à la machine entraînée. Ceci est également très fiable quand la sécurité de l’opérateur est un jeu.Lorsque les éléments de frottement glissent, le coefficient de frottement fait passer l’application du domaine statique au dynamique. Ainsi, le couple transmis est réduit de 80% à 50% en fonction de la vitesse, permettant ainsi d’éviter la surchauffe dûà un glissement continu.Quand il n’y a plus d’entraînement, le frottement entre les cônes et la roue font repasser l’application dans le domaine statique. Si l’opérateur a besoin de manoeuvrer la machine à la main, il est possible de desserrer le limiteur grâce à l’écrou de tarage libérant ainsi le mécanisme. Pour créèr à nouveau l’application, resserrer l’écrou de tarage.

REGLAGE DU COUPLE

Les réducteurs et motoréducteurs de la série MS avec limiteur de couple incorporé sont réglés en usine au couple nominal que l’on trouve dans notre catalogue et à une vitesse de rotation de 1400 T/mn. Si l’on veut un tarage différent, il suffit de suivre les indications suivantes:

(1) Dévisser complètement l’écrou.(2) Visser l’écrou jusqu’au moment où les rondelles éelastiques ne sont pas encore comprimées.(3) Visser l’écrou selon le nombre de tours indiqués dans le tableau en fonction du couple prédéterminé.(4) En alternative, pour un tarage plus exact, on doit visser l’écrou progressivement et mesurer le couple de glissement avec le réducteur à l’ârret en actionnant l’arbre de sortie avec une clé dynamométrique.

Quantità olio (Litri) / Oil quantity (Litres)

MRV MS B3 B6-B7 B8 V5-V6

30 0.05 0.08

40 - 4 0.10 0.15

50 - 5 0.23 0.35

61 - 63 - 7 0.51 0.77

80 - 8 0.75 1.13

90 1.36 2.04

100 2.06 3.09

125 2.47 3.71

150 3.32 4.98

LUBRIFICATION

MRV 30 MS - MRV 80 MSCes motoréducteurs ne requièrent pas de maintenance supplémentaire durante le cycle de vie et sont remplis avec la juste quantité d’huile synthétique en relation directe avec la figure de montage indiquée sur la plaque signalétique (lubrification à la graisse impossible).MRV 90 MS - MRV 150 MSDe la taille MRV 90 à la taille MRV 150 les réduc-teurs sont livrés sans lubrifiant et doivent être remplis avec la juste quantité d’huile synthé-tique avant utilisation (lubrification à la graisse impossible).

LUBRIFICAZIONE

MRV 30 MS - MRV 80 MSQuesti riduttori sono forniti della giusta quantità di olio sintetico prevista dalla posizione di montaggio riportata sulla targhetta le cui specifiche caratteristiche garantiscono la lubrificazione a vita dei riduttori ( non è possibile una lubrificazione a grasso ). MRV 90 MS - MRV 150 MSLe grandezze 90 - 100 - 125 - 150 vengono fornite senza lubrificante e devono essere riempiti di olio sintetico prima di usarle ( non è possibile una lubrificazione a grasso ).

LUBRICATION

MRV 30 MS - MRV 80 MSThese units should require no further maintenance for their life of the unit and are filled with the correct quantity of synthetic oil for the mounting position indicated on the nameplate (grease lubrication is not possible).MRV 90 MS - MRV 150 MSSize 90 - 150 are supplied without lubrication and should be filled to the correct level with synthetic oil before use (grease lubrication is not possible).

PREROGATIVE DEI RIDUTTORI MS OPERATION OF WORM GEARBOX MS CONSIGNES D’UTILISATION DES REDUCTEURS TYPE MS



TYPE m2 m1 y Kg

30 MS 43 30 58 1.75

40 - 4 MS 55 41 76 2.7

50 - 5 MS 64 49 93 5.0

61 - 63 - 7 MS 77 60 116.5 9.1

80 - 8 MS 77 61 100 14.6

90 MS 99 75 - 29.5

100 MS 95 77.5 - 42.5

125 MS 115 90 - 69

150 MS 125 95 - 82

SIZE

Numero di giri della ghiera per la taratura del limitatoreTurns of a nut to set torque limiter

Tours d’écrou pour le réglage du limiteur de couple

1/2 3/4 1 11/4 11/2 13/4 2

Coppia di taratura in Nm / Slipping torque Nm / Couple Nm

40 - 4 10 20 25 30 35 40 45

50 - 5 30 40 50 55 60 65 70

61 - 63 - 7 80 100 120 140 160 180 190

80 - 8 150 190 240 280 320 360 400

90 180 230 270 830 370 420 470

100 220 280 330 390 440 490 550

125 380 480 580 690 800 900 1000

150 800 920 1050 1160 1280 1400 -

44

Cono mobile / Mobile cone / Basque conique mobile

Anello “O”-Ring / “O”-Ring/ Joint “O”-Ring

Ghiera di regolazione autobloccante/ Adjusting nut & locking ring/ Ecrou de réglage autoblocant

Premi molla / Spacer / Entretoise

Molla a tazza / Disc spring / Rondelles elastiques

Corona / Worm wheel / Roue bronze

Cono fisso / Hollow shaft output / Arbre de sortie creux



Coperchio MS / MS Shaft cover / Palier pour MS Posizione ghiera MS / Torque adjuster position / Position du MS

Vista lato ingresso motore vite in alto Always view worm over wheel

Vue coté entrée moteur, axe de la vis au-dessus

SIZE C M A L D E c L Ld B

30 30 40 58 60 14 18 (20X5) 98 140 0

40 - 4 40 50 80 82 19 22 (30X6) 130 182 10

50 - 5 50 60 95 98 24 28 (40X8) 155 218 10

61 60 70 117 120 25 30 (50X8) 187 260 10

63 - 7 60 70 117 120 28 34 (50X8) 187 260 10

80 - 8 60 70 119 122 32 38 (50X10) 207 280 10

90 80 96 149 150 38 44 (70X10) 245 342 16

100 100 110 153 155 42 50 (80X12) 263 375 10

125 110 130 177 180 48 58 (90X14) 307 440 20

150 110 130 188 190 55 63 (90X16) 318 450 20

Albero lento semplice / Single output shaft / Arbre de sortie simple Albero lento bisporgente / Double output shaft / Arbre de sortie double

VS

45

AS AB

SIZE J d (j6) K m b1 t1

30 51 9 20 M4 3 10.5

40 - 4 64 11 22 M5 4 12.5

50 - 5 74 14 30 M6 5 16

61 97 19 40 M8 6 21.5

63 - 7 97 19 40 M8 6 21.5

80 - 8 115 24 50 M8 8 27

90 115 24 50 M8 8 27

100 146 28 60 M8 8 31

125 166 38 80 M10 10 41

150 178 42 100 M10 12 45

SIZE a e s A B C G H I

30 -- -- -- -- -- -- -- -- --

40 51 65 7 100 39 161 22 8 4

50 - 5 71 85 9 100 52 174 22 8 4

61 81 85 9 150 52 232 25 14 6

63 - 7 81 100 9 150 52 232 25 14 6

80 - 8 111 130 11 200 77.5 307.5 25 14 6

90 111 130 11 200 77.5 315 25 14 6

100 131 165 12.5 166 100 306 25 20 12

125 181 215 12.5 175 125 340 25 20 15

150 201 230 14.5 200 135 360 25 20 15

Vite sporgente / Double extended worm shaft / Vis traversanteBraccio di reazione / Torque arm / Bras de reaction

BR

ACCESSORIACCESSORIESACCESSOIRES



Posizione albero uscita / Output shaft position / Position du arbre de sortie

Vista lato ingresso motore vite in alto Always view worm over wheelVue coté entrée moteur, axe de la vis au-dessus

46

Altre flange uscita/ Alternative output flanges / Autres brides de sortie

F1, F2, F3, F4

KQ KP KN KB KM KC KO KA G1 p I d H7 b t

MRV 30 F1 --- 75 40 7 54 4 6 50 60 80 30 14 5 16.5

MRV 30 F3 --- 95 63 8 80 3 6 60.5 60 90.5 30 14 5 16.5

MRV 40 F1 --- 110 60 9 87 5 8.5 69 82 110 40 18 6 20.8

MRV 50 F1 --- 115 70 10 90 4 10.5 93 98 142 50 24 8 27.3

MRV 50 F2 --- 140 95 10 115 5 9 87.5 98 136.5 50 24 8 27.3

MRV 61 F1 138 180 115 9 150 5 10.5 116 120 176 63 25 8 28.3

MRV 61 F2 --- 180 115 12 150 5 10.5 116 120 176 63 25 8 28.3

MRV 61 F3 144 180 115 7 150 3.5 9 87 120 147 63 25 8 28.3

MRV 61 F4 --- 160 110 10 130 5 11 105 120 165 63 25 8 28.3

MRV 63 F1 138 180 115 9 150 5 10.5 116 120 176 63 28 8 31.3

MRV 63 F3 144 180 115 7 150 3.5 9 87 120 147 63 28 8 31.3


KQ KP KN KB KM KC KO KA G1 p I d H7 b t

MRV 4 F1 106 106 60 9 87 6 6.5 68 82 109 40 18 6 20.8

MRV 5 F1 140 140 95 10 115 5 9 87.5 98 136.5 50 24 8 27.3

MRV 7 F1 160 160 110 10 130 5 11 105 120 165 63 28 8 31.3

MRV 100 F1 250 250 180 16 215 5 14 108 155 185.5 100 42 12 45.3

Serie Modulare Modular Series Série Modulaire

Serie Pesante Strong Series Série Forte

Riduttori a Vite Senza Fine - Accessori.Worm Gearboxes - Accessories.

Réducteurs à vis-sans-fin - Accessoires.

Piedi S1 / S1 Feet / Pattes S1

SIZE I T H E A C K L O S

40 40 67 72 139 52 90 81 98 8.5 10

50 50 80.5 82 162.5 63 110 98.5 124 8.5 12

63 - 61 63 52.5 100 152.5 95 140 111 136 10.5 10

80 80 122 142 264 140 200 146 180 12 12

Coperchio FP1 / FP1 Cover / Palier FP1

SIZE I M m C1 KE KO P N g

40 40 83 96 84 M6 M8 96 60 2.5

50 50 75 120 105 M6 M8 96 60 2.5

47

SIZE2 / Poles 4 / Poles 6 / Poles B5 - B14 B5 B14

KgKW Nm A

(400V) KW Nm A(400V) KW Nm A

(400V) D E L Lm Y P N M O Q P N M O Q

56 A 0.09 0.3 0.38 0.06 0.4 0.38 -- - --9 3 20 169 107 80 100 120 9 2.5 50 65 80 M5 2.5

2.7

56 B 0.12 0.5 0.53 0.09 0.6 0.43 -- - -- 2.9

63 A 0.18 0.6 0.58 0.12 1.0 0.57 0.09 1.0 0.5411 4 23 191 123 95 115 140 9.5 3 60 75 90 M5 2.5

3.8

63 B 0.25 0.9 0.9 0.18 1.4 0.65 0.12 1.4 0.67 4.2

71 A O.37 1.2 1.0 0.25 1.7 0.86 0.18 1.9 0.7514 5 30 213 142 110 130 160 9.5 3.5 70 85 105 M6 2.5

5.9

71 B 0.55 1.9 1.5 0.37 2.6 1.3 0.25 2.8 0.9 6.5

80 A 0.75 2.5 1.8 0.55 3.9 1.6 0.37 4.0 1.419 6 40 237 160 130 165 200 11.5 3.5 80 100 120 M6 3

8.5

80 B 1.1 3.8 2.5 0.75 5.2 2.2 0.55 5.8 2.0 10

90 S 1.5 5.0 3.9 1.1 7.8 3.0 0.75 8.0 2.2

24 8 50

257

180 130 165 200 11.5 3.5 95 115 140 M8 3

12.5

90 L 2.2 7.5 5.5 1.5 10 4.0 1.1 12 3.2 282 15

90 LL -- -- -- 1.8 12 5.2 -- -- -- 282 17

100 LA 3 10 6.4 2.2 15 5.9 1.5 15 4.3

28 8 60

313 198

180 215 250 13 4 110 130 160 M8 3.5

20

100 LB -- -- -- 3 20 7.5 1.8 19 5.0 313 198 22

112 M 4 13.8 9.0 4 27 9.6 2.2 23 5.8 332 224 35

132 S5.5 18 12.7

5.5 37 12.4 3 31 7.2

38 10 80

362

252 230 265 300 14 4

41

7.5 25 17.0 402 51

132 M 9 30 18.5 7.5 50 16 4 42 10.8 402 51

132 L -- -- -- 9 62 19.5 5.5 56 14.0 402 61

160 M11 37 24

11 74 25 7.5 74 17.042 12 110

491

316 250 300 350 18 5

102

15 48 29 491 102

160 L 18.5 63 35 15 98 34 11 113 25 536 115

180 M 22 75 42 18.5 123 41 -- -- --48 14 110

555360 250 300 350 18 5

121

180 L -- -- -- 22 147 45 15 150 31 597 140

200 L-- -- -- 30 195 56 18.5 196 37

55 14 110 745 395 300 350 400 18 5 250-- -- -- -- -- -- 22 233 43

B5

B14

Dimensioni Motori. Electric motor Dimensions. Dimensions Moteurs.

Le dimensioni sono indicative e possono variare tra i vari costruttori.

Outside dimension may be different according to manufacturers.

Les dimensions extérieures peuvent changer en fonction des différents fabricants.

MOTORIMOTORSMOTEURS

Riduttori a Vite Senza Fine - Motori elettrici.Worm Gearboxes - Electric motors.

Réducteurs à vis-sans-fin - Moteurs électriques.

48

Leggere attentamente

Le seguenti raccomandazioni sono fondamentali per la vostra protezione e per garantirvi molti anni di sicuro funzionamento del vostro prodotto senza alcun problema.Leggere attentamente tutte le istruzioni prima di azionare il riduttore. L’inappropriata installazione, manutenzione o funzionamento del riduttore può causare incidenti al personale addetto e danni al riduttore stesso.

ATTENZIONE!E’ richiesta autorizzazione scritta per azionare riduttori in ascensori o dispositivi per il movimento delle persone. Controllare che alcune applicazioni non eccedano la massima capacità di carico ammessa pubblicata in questo catalogo.L’acquirente è l’unico responsabile per la determinazione dell’adeguatezza del prodotto per qualcuna o tutte le utilizzazioni che l’acquirente stesso farà del riduttore. L’applicazione dell’acquirente non potrà essere soggetta ad alcuna implicita garanzia di montaggio per uno scopo particolare.Per ragioni di sicurezza l’acquirente dovrà provvedere a porre protezioni adeguate su tutta la lunghezza dell’albero a tutti gli organi in movimento. L’utilizzatore è responsabile del controllo di tutti i codici di sicurezza e la predisposizione di protezioni adeguate. In assenza di tali precauzioni si possono verificare incidenti alle persone e danni agli apparati.Olio e riduttori bollenti possono causare gravi ustioni. Usare estrema cautela nella rimozione dei tappi e delle ventole.Assicurarsi che la corrente di alimentazione sia scollegata prima di riparare o rimuovere alcun componente. Chiudere l’alimentazione e contrassegnare tale operazione per evitare accensioni accidentali.I riduttori non devono essere considerati esenti da guasti o a bloccaggio automatico. Se sono indispensabili queste caratteristiche, deve essere utilizzato un dispositivo indipendente della dimensione adatta. I riduttori non devono essere utilizzati come freni.Qualsiasi freno sia utilizzato insieme al riduttore deve essere della giusta grandezza e posizionato in modo da non causare carichi eccessivi non previsti dai dati forniti nel catalogo.I dispositivi di sollevamento come le golfare devono essere usati solo per sollevare verticalmente il riduttore e non altri dispositivi associati o motori.L’utilizzo di un olio con un additivo EP su gruppi provvisti di dispositivo di arresto possono inficiare l’uso corretto del freno e provocare danni alle persone, alle cose ed al riduttore stesso nonché ad altri apparecchi.I carichi sospesi assoggettano i cuscinetti dell’albero a sollecitazioni che possono causare, se non adeguatamente dimensionati, l’usura prematura dei cuscinetti e/o la rottura dell’albero a causa della resistenza alla flessione.

La nostra ditta non si ritiene responsabile per eventuali danni diretti o indiretti derivanti da un uso improprio dei prodotti e dalla mancata osservanza delle indicazioni riportate a catalogo.

Please Read Carefully

The following WARNING and CAUTION information is suplied to you for your protection and to provide you with many years of trouble free and safe operation of your product.Read ALL instructions prior to operating reducer. Injury to personnel or reducer failure may be caused by improper installation, maintenance or operation.

WARNING:Written authorization required to operate or use reducers in man lift or people moving devices.Check to make certain application does not exceed the allowable load capacities published in the current catalog.

Buyer shall be solely responsible for determining the adequacy of the product for any and all uses to which Buyer shall apply the product. The application by Buyer shall not be subject to any implied warranty of fitness for a particular purpose.

For safety, Buyer or User should provide protective guards over all shaft extensions and any moving apparatus mounted thereon. The User is responsible for checking all applicable safety codes in his area and providing suitable guards. Failure to do so may result in bodily injury and/or damage to equipment.

Hot oil and reducers can cause severe burns. Use extreme care when removing lubrication plugs and vents.Make certain that the power supply is disconnected before attempting to service or remove any components. Lock out the power supply and tag it to prevent unexpected application power.Reducers are not to be considered fail safe or self-locking devices. If these features are required, a properly sized, independent holding device should be utilized. Reducers should not be used as a brake.

Any brakes that are used in conjunction with a reducer must be sized or positioned in such a way so as to not subject the reducer to loads beyond the catalog rating.

Lifting supports including eyebolts are to be used for vertically lifting the gearbox only and not other associated attachments or motors.Use of an oil with an EP additive on units with backstops may prevent proper operation of the backstop. Injury to personnel, damage to the reducer or other equipment may result.Overhung loads subject shaft bearings and shafts to stress which may cause premature bearing failure and or shaft breakage from bending fatigue, it not sized properly.

Our company will not be responsible for any direct or indirect damages, caused by a wrong use of the products or for not obsering the catalogue indication

INFORMAZIONI IMPORTANTIIMPORTANT INFORMATION


Réducteurs à vis-sans-fin..

Rev. 1.15 - 20.07.2007

Ci riserviamo il diritto di apportare modifiche al presente catalogo senza preavviso.E’ vietata la riproduzione totale o parziale del presente catalogo senza preventiva autorizzazione di TS.

We reserve the right to amend this catalogue at any time without prior notice.Any unauthorized reproduction is strictly forbidden.

Nous nous réservons le droit d’apporter toutes modifications à nos produits.La reproduction et la publication partielle ou totale de ce catalogue est interdite sans notre autorisation.

2 mrv - rv 7 mrvc - rvc 20 mrvp - rvp€¦ · 19 dimensioni mrv - rv f. mrv ... any position and...

Documents