2 group presentation steel mills
TRANSCRIPT
AMTEKGroup Presentation.......
1
...........................................................................
Hi Tech InternationalSteel Mills Presentation
Bra
nd
s
Hydraulic Oils – AW, HLP and Water based Greases – RR3, MP3, EP2, Silicone and Molybdenum Gear Oils – Mineral Oils GL5, and Synthetic Rust Preventive Oils – Dry type and Non Dry type
2
Rust Preventive Oils Dry type oils for brushing applications
Non Sticky Easy to remove High corrosion prevention
Non Dry type Oils For electrostatic and roller drop applications 2 years corrosion protection Excellent thixotropic properties to prevent
flow and movement of oil
Rust Preventive Rust Preventive OilsOils
3
Life guarantee ……. Economical……..Long lasting performance
VCI HDPE Paper – 3 Layer, 4 Layer VCI Tuff Films – PE Films for coil and CTL packaging VCI Stretch Film – Automated packaging lines VCI Crepe Paper – Automated packaging lines Colour Coating Adhesive films – For colur coated sheets
4
VCI HDPE Papers HDPE laminated with VCI paper – Excellent
product for long term prevention Available in 3 layer and 4 layer laminated 12-15 gsm coating
5
VCI VCI ProductsProducts
VCI Tuff Film Ideal where first
layer is VCI Film and second layer is HDPE fabric.
No oil absorption in the film and better protection on the surfaces.
Tuff FilmTuff Film
6
VCI Crepe PaperAutomated and small
slit products require tight and speedy packaging.
Available with lamination and printing
Available in White or Brown paper
Crepe PaperCrepe Paper
7
Stretch FilmsVCI Stretch films
for higher strength and protection
Available in sizes 4” to 44”
Stretch FilmStretch Film
8
Side Discs 3mm, 5mm flute or
1mm Protex Guard Sheet
Usually available as a ring cut in ID 508mm and outer size 1000mm , 1150mm, 1300mm, 1500mm etc
Side DiscsSide Discs
9
Packaging Packaging ProcessProcess
10
Packaging Packaging ProcessProcess
11
Packaging Packaging ProcessProcess
12
Packaging Packaging ProcessProcess
13
Packaging Packaging ProcessProcess
14
Packaging Packaging ProcessProcess
15