Under instructions from Craig Shepard and Leanne Chesser of KordaMentha as Administrators of ACME Operations Pty Ltd and ACME Equipment Pty Ltd

(Both Administrators Appointed) trading as Ajax Fasteners.

2 Day Administrators’ Auction

Ajax Fasteners Bolt & Fastener

Manufacturing Plant Closure

Auction days: Tuesday 10 September 2019

Traditional on-site & webcast auction

Wednesday 11 September 2019 Traditional on-site auction

Auctions start at 10am AEST each day

Restructuring

HILCO0003 Ajax Fasteners Auction 4pp Brochure Final.indd 1 22/8/19 5:15 pm

• 2005 Hyodong HBF-225SS (2 die, 2 blow, 11mm cutoff diameter, 14-80mm shank & 20-110mm cutoff lengths)

• 2005 Hyodong HBF-240SS (2 die, 2 blow, 14mm cutoff diameter, 18-100mm shank & 25-140mm cutoff lengths)

• Nakashimada H-20A DSSD (6mm cutoff diameter, 50mm shank & 70mm cutoff lengths)

• Carlo Salvi RF-635-SV DSSD Semi-tubular rivet header (6.35mm cutoff diameter, 65mm shank & 87mm cutoff lengths)

• 2008 Hyodong HBF-480SS (4 die, 4 blow, 32mm cutoff diameter, 55-270mm cutoff length) with HR-8A Rolling Machine (24-32mm thread diameter)

• 2008 Hyodong HBF-470SS (4 die, 4 blow, 22mm cutoff diameter, 40-250mm cutoff length) with HR-7 Rolling Machine (M16-M22 thread diameter)

• 2008 Hyodong HBF-460SSL (4 die, 4 blow, 20mm cutoff diameter, 30-240mm cutoff length) with HR-6 Rolling Machine (M16-M20 thread diameter)

• 1993 Nedschroef M16 Bolt Maker (4 die, control panel updated 2015).

Ajax Fasteners Bolt & Fastener

Manufacturing Plant Closure

Auction days: Tuesday 10 September 2019 Traditional on-site & webcast auction

Wednesday 11 September 2019 Traditional on-site auctionAuctions start at 10am AEST each day

Cold Headers (webcast & on-site Tues 10 Sept from 11am AEST)

Bolt formers | Bolt maker (webcast & on-site auction Tues 10 Sept from 11am AEST)

Administrators’ AuctionMajor plant including boltformers, cold headers, wire drawers, thread rollers, hot nut formers & tapping machines will also be auctioned via webcast commencing at 11am AEST Tues 10 September.

• Nakashimada NH-15B DSSD (4.8mm cutoff diameter, 38mm shank & 60mm cutoff lengths)

• Nakashimada PF1080 (2 die, 3 blow, 100 cutoff diameter, 160mm 1st die, 80mm 2nd die, 100mm cut off length)

• Itami USM-82DSSD (8mm cutoff diameter, 80mm shank & 100mm cutoff lengths).

HILCO0003 Ajax Fasteners Auction 4pp Brochure Final.indd 2 22/8/19 5:15 pm

• 4x 1997 RMG 34-0356-87 inline wire drawing machines (3/16” nominal diameter)

• 4x 1999 RMG 67-1569-87 wire drawing machines (3/8” nominal diameter)

• RMG 67-20115-20 inline wire drawing machine 3/8”nominal diameter)

• 2x 1988 Fastener Engineers DTHA-05-24 inline wire drawing machines (5/16” nominal diameter)

• 2x 1997 Fastener Engineers DTVA-60115-44 inline wire drawing machines (5/8” nominal diameter)

• 1990 Herbon Britenbach 12mm.

• 2x 1999 Sanmei TMI-12R (12mm thread diameter, 135mm thread length)

• 3x 1999 Charng Guey CGR253H (8mm thread diameter)

• 1997 Saspi RGVP 3-20 Inline thread roller (12mm thread diameter, 80mm thread & 130mm shank lengths)

• 2x EWM GW-61 (8mm thread diameter, 52mm thread & 80mm shank lengths)

• 1997 Saspi RGVP 5-40 (5-18mm thread diameter, 200mm shank & 130mm thread lengths) with high speed Sems & Pointer (5-25mm shank diameter, 20-200 shank length, 40-160PPM Variable).

• 1970 Hatebur AMP-30 (3 die, 19-40mm bar diameter, 20-72mm cutoff length)

• 1987 Nedschroef MW-48 (3 die, 38mm max bar diameter, 15-60mm cutoff length, 50mm die KO).

• 2x Shimazu Super 8 Twin Spindle (3/4” – 1” tap range, 20-65 PPM), bent shank design, hopper

• 2 x Shimazu Super 10 Twin Spindle (1” – 1.25” tap range, 20-50 PPM), bent shank design, hopper.

Wire Drawers (webcast & on-site Tues 10 Sept from 11 am AEST)

Thread Rollers (webcast & on-site Tues 10 Sept from 11 am AEST)

Hot Nut Formers (webcast & on-site Tues 10 Sept from 11 am AEST)

Tapping Machines (webcast & on-site Tues 10 Sept from 11am AEST)

• 2x Ford Falcon utes, auto, with aluminium drop side tray

• 2007 Toyota Dyna 4x2 rigid curtain side tray truck, wide LWB, manual, 4m tray, rear barn doors

• JLG 35E electric telescopic cherry picker

• Forklifts - Mitsubishi FG40 4T, 2x 2.5T FG25T & FG15 LP 1.5T gas, Clark 3.9T CGC70 LP gas, Jungheinrich 1400kg electric stock piling, Crown 1400kg stock piling, BT 2T Electric stock piling, TCM 2.5T electric.

Forklifts & Vehicles (on-site Tues 10 Sept from 2pm AEST)

• Large quantity of raw material coil steel.

StockInspection Times:

9 September 2019, 9:00am-4:00pm or by appointment.

HILCO0003 Ajax Fasteners Auction 4pp Brochure Final.indd 3 22/8/19 5:15 pm

Note: A 15% Buyers Premium ex GST will be charged on the knockdown price of each lot. Photos & catalogue available at https://www.industrialbid.com/auctions/4558-ajax-fasteners-bolt-fastener-manufacturing-plant-closure-auction/ Inspections available by appointment and on viewing day prior to auction 9am-4pm (AEST). Special condition of sale: Major plant including bolt formers must be removed strictly by 3 October 2019 Under instructions from Mr. Craig Shepard of Kordmentha in the matter of ACME Operations Pty Ltd and ACME Equipment Pty Ltd (Administrators Appointed) trading as Ajax Fasteners.

Inspection Information: Monday 9 September 2019, 9:00am-4:00pm (AEST) or by appointment.

lockwoodcompany.com.au

For more information and to arrange an inspection, please contact:

View auction details, catalogue, register for webcast auction and bid at:https://www.industrialbid.com/auctions/4558-ajax-fasteners-bolt-fastener-manufacturing-plant-closure-auction

(Webcast auction commences 10am AEST Tuesday 10 September 2019).

• Triton RO59 rotating wash tunnel. Steel mesh trommel with 2 wash heaters & 2 rinse heaters

• 1987 Lindberg 17-36218 tempering furnace line incl. washing machine & pre wash

• 2009 RUF Swarf press pellet machine

• 3x Joinpack semi-automatic strapping machines

• Hydra Pac paper bale press

• Jarrett Synergy, ITW Mima & Lantech pallet wrapper.

• Various workshop equipment, tools and spares including Bridgeport & Roku Roku milling machines, radial arm drills, sandblasting machines, P&S 40T punch, Cincinnati & Jones & Shipman cylindrical grinders, Makino, Nicco & Jones & Shipman surface grinders, Takisawa, Kirloskar, Enterprise 400 & Gedde Weiler lathes, Atlas Copco air compressor, Cold steel saw, Avery 300KN hardness tester, Carolina 55T & Servex 100T garage presses, assorted welders, pedestal & bench grinders, plus a large quantity of Tooling and Metrology & Laboratory equipment.

Finishing & Packing Plant (on-site Tuesday 10 Sept)

Workshop & Tool Room (on-site Wed 11 Sept 10am AEST)

Scott Matthews (Hilco Global)

+61 474 890 122smatthews@hilcoglobal.com

Tom Lockwood (Lockwood & Co)

+61 419 310 852toml@lockwoodcompany.com.au

Auction & Equipment located at

41-45 Mills Road, Braeside,

Victoria, Australia

Restructuring

• L&M Machining 15 High Speed Pointer (M4 – M24 diameter with lengths under head to 250mm)

• 1985 Takita GR40 washing machine

• 1987 Takita KDD-16 washing machine with rotary dryer.

• 260 Bays Heavy duty multi-tiered pallet racking

• 1x Redfern Finn, 3x Shangxi Keliyuan radial arm 2000kg jib cranes

• 2x 20ft & 40ft shipping containers

• Number of platform trolleys, tippers, lifters, bins, stillages

• Approx 5,000lt storage tank.

Other Major Manufacturing Machines (webcast & on-site Tues 10 Sept from 11am AEST)

Racking & Plant Services (on-site Tues 10 Sept)

HILCO0003 Ajax Fasteners Auction 4pp Brochure Final.indd 4 22/8/19 5:15 pm