2-antenna receive diversity(gbss14.0_02)
TRANSCRIPT
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
1/32
GSM BSS
GBSS14.0
2-Antenna Receive Diversity Feature
Parameter Description
Issue 02
Date 2012-08-30
HUAWEI TECHNOLOGIES CO., LTD.
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
2/32
Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
i
http://www.huawei.com/ -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
3/32
Contents
1 Introduction to This Document..................................................................................................1
1.1 Scope..................................................................................................................................................................1
1.2 Intended Audience..............................................................................................................................................1
1.3 Change History...................................................................................................................................................1
2 Overview.........................................................................................................................................4
3 Technical Description...................................................................................................................5
3.1 Technical Principle.............................................................................................................................................5
3.2 Diversity Combining Algorithms.......................................................................................................................6
3.2.1 MRC..........................................................................................................................................................6
3.2.2 ICC.............................................................................................................................................................6
3.2.3 EICC..........................................................................................................................................................6
3.2.4 ADC...........................................................................................................................................................6
4 Related Features.............................................................................................................................8
5 Impact on the Network.................................................................................................................9
5.1 2-Antenna Receive Diversity..............................................................................................................................9
5.1.1 Impact on System Capacity.......................................................................................................................9
5.1.2 Impact on Network Performance...............................................................................................................9
5.2 MRC...................................................................................................................................................................9
5.2.1 Impact on System Capacity.......................................................................................................................9
5.2.2 Impact on Network Performance...............................................................................................................9
5.3 ICC......................................................................................................................................................................9
5.3.1 Impact on System Capacity.....................................................................................................................10
5.3.2 Impact on Network Performance.............................................................................................................10
5.4 EICC.................................................................................................................................................................10
5.4.1 Impact on System Capacity.....................................................................................................................10
5.4.2 Impact on Network Performance.............................................................................................................10
5.5 ADC..................................................................................................................................................................10
5.5.1 Impact on System Capacity.....................................................................................................................10
5.5.2 Impact on Network Performance.............................................................................................................10
6 Engineering Guidelines.............................................................................................................11
6.1 When to Use 2-Antenna Receive Diversity......................................................................................................11
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description Contents
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
ii
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
4/32
6.1.1 2-Antenna Receive Diversity...................................................................................................................11
6.1.2 MRC Algorithm.......................................................................................................................................11
6.1.3 ICC Algorithm.........................................................................................................................................11
6.1.4 EICC Algorithm......................................................................................................................................11
6.1.5 ADC Algorithm.......................................................................................................................................11
6.2 Information to Be Collected.............................................................................................................................12
6.3 Network Planning.............................................................................................................................................12
6.4 Feature Deployment.........................................................................................................................................12
6.4.1 2-Antenna Receive Diversity...................................................................................................................13
6.4.2 Deploying MRC......................................................................................................................................13
6.4.3 Deploying ICC.........................................................................................................................................13
6.4.4 Deploying EICC......................................................................................................................................13
6.5 Performance Optimization................................................................................................................................13
7 Parameters.....................................................................................................................................14
8 Counters........................................................................................................................................26
9 Glossary.........................................................................................................................................27
10 Reference Documents...............................................................................................................28
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description Contents
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
iii
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
5/32
1 Introduction to This Document
1.1 Scope
This document describes the working principle of 2-antenna receive diversity and the diversity
combining algorithms, including the following features:
l GBFD-115821 EICC
l MRFD-210604 2-Antenna Receive Diversity
1.2 Intended Audience
It is assumed that users of this document are familiar with GSM basics and have a working
knowledge of GSM telecommunication.
This document is intended for:
l Personnel working on Huawei GSM products or systems
l System operators who need a general understanding of this feature
1.3 Change History
The change history provides information on the changes between different document versions.
There are two types of changes, which are defined as follows:
l Feature change
Feature change refers to the change in the 2-Antenna receive diversity feature of a specific
product version.
l Editorial change
Editorial change refers to the change in wording or the addition of the information that was
not described in the earlier version.
Document Issues
The document issues are as follows:
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 1 Introduction to This Document
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
1
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
6/32
l 02 (2012-08-30)
l 01 (2012-04-28)
l Draft A (2012-02-15)
02 (2012-08-30)
This is the second release of GBSS14.0.
Compared with issue 01 (2012-04-28) of GBSS14.0, issue 02 (2012-08-30) of GBSS14.0
incorporates the changes described in the following table.
Change Type Change Description Parameter Change
Feature change None None
Editorial change Modified the following
chapters:
l Chapter5.1 2-Antenna
Receive Diversity
l Chapter6.1 When to Use
2-Antenna Receive
Diversity
l Chapter6.4 Feature
Deployment
The following parameters are
added:
l SndRcvMode
l SndRcvMode1
l SndRcvMode2
l SndRcvMode3
l SndRcvMode4
01 (2012-04-28)
This is the first release of GBSS14.0.
Compared with issue Draft A (2012-02-15) of GBSS14.0, issue 01 (2012-04-28) of GBSS14.0
incorporates the changes described in the following table.
Change Type Change Description Parameter Change
Feature change Added the following
chapters:Chapter "5.5 ADC"
None
Editorial change Added the following
chapters:
l Chapter "4 Related
Features"
l Chapter "5 Impact on the
Network"
l Chapter "6 Engineering
Guidelines"
None
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 1 Introduction to This Document
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
2
http://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode4.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode3.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode2.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode1.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
7/32
Draft A (2012-02-15)
This is the draft release of GBSS14.0.
Compared with issue 01 (2011-03-31) of GBSS13.0, issue Draft A (2012-02-15) of GBSS14.0
has no change.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 1 Introduction to This Document
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
3
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
8/32
2 OverviewIn a wireless communications system, the radio signal from the transmitter arrives at the receiver
through two or more paths. This phenomenon is called multipath propagation. With multipath
propagation, the amplitude, phase, and angle of the received signal change. This phenomenon
is called multipath fading. As a result, the quality of the received signal deteriorates. Diversity
is one of the techniques used to handle multipath fading in the communications system. It
increases the signal-to-noise ratio by superimposing uncorrelated signals.
The diversity technique in GSM involves time diversity, frequency diversity, and space diversity.
In the case of space diversity, multiple antennas are used at the receiver to receive uncorrelated
signals of the same source (superimposition of uncorrelated signals). In engineering
implementation, generally two antennas (or two polarization ends of the same polarization
antenna) are used to receive signals. The signals received from the two antennas can be combined
in different ways to obtain desired signals, for example, Maximal Ratio Combining (MRC),
Interference Cancellation Combining (ICC), and Enhanced Interference Rejection Combining(EICC).
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 2 Overview
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
4
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
9/32
3 Technical Description
3.1 Technical Principle
The 2-antenna receive diversity technique combines the signals received from the two diverse
antennas at the receiving end to mitigate multipath interference. Figure 3-1 shows the working
principle of 2-antenna receive diversity.
Figure 3-1 Working principle of 2-antenna receive diversity
As shown in Figure 3-1:
1. The signal x(k) arrives at the diverse antennas through two RX channels. The two RX
signals are identified as r1(k) and r2(k). After the superimposition of interference and noise,
the two RX signals are identified as S1(k) and S2(k).
2. Based on the maximum signal-to-noise ratio criterion, the adaptive combining coefficients
W1 and W2 are calculated and the output signal is obtained through the formula: y(k) =
W1 x S1(k) + W2 x S2(k).
The combining algorithms consist of the MRC, ICC, and EICC. In Figure 3-1 the two RX
channels correspond to the main and diversity RX channels of the TRX.
To enabled this feature, set the transmit and receive mode of a board to dual-receive.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 3 Technical Description
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
5
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
10/32
NOTE
The parameters related to the transmit and receive mode vary depending on the board type. These
parameters includeSndRcvMode, SndRcvMode1, SndRcvMode2, SndRcvMode3, and SndRcvMode4.
3.2 Diversity Combining Algorithms
3.2.1 MRC
MRC performs weighted combining on the two signals received by the BTS based on their
respective signal-to-noise ratios. This combining method is ideal for situations with little
interference and limited noise. It is applicable to wide coverage, such as over sea coverage.
To enable the MRC algorithm of 2-antenna receive diversity, set ICTYPtoMRC(MRC).
3.2.2 ICCICC is a multi-antenna combining technique developed from MRC. In tight frequency reuse
scenarios the interfering signals received at diverse antennas may come from the same interfering
source. Therefore, a certain correlation exists among these interfering signals. ICC uses this
correlation when combining the signals of the two antennas to eliminate certain interference.
The use of ICC can improve the speech quality and data throughput in situations with strong
interference, for example, the network where tight frequency reuse is in place. ICC can suppress
the interference within the GSM system and from other systems if correlation exists between
the interfering signals received on diverse antennas.
To enable the ICC algorithm of 2-antenna receive diversity, set ICTYPto ICC(ICC).
A resource item license is required for enabling this algorithm.
3.2.3 EICC
The GBFD-115821 EICC feature is developed from ICC. Generally, the interfering signals
received from multiple antennas are both space correlated (among the antennas) and time
correlated. The difference between ICC and EICC is that ICC considers only space correlation
to eliminate interference whereas EICC considers both space correlation and time correlation to
suppress and eliminate interference. EICC is used in high traffic network where tight frequency
reuse is in place and in situations where the noise of a single interfering source is limited. The
EICC performs better than ICC.
SetSTIRCALLOWED to YES(Yes) to select the EICC algorithm of 2-antenna receive diversity.
This feature can be enabled only after you apply for a resource item license.
3.2.4 ADC
The adaptive diversity combining (ADC) algorithm checks whether an ongoing call is in the
interference-limited or noise-limited scenario.
l In the interference-limited scenario, the BTS uses EICC.
l In the noise-limited scenario, the BTS uses MRC.
The ADC algorithm achieves favorable network performance in noise-limited and interference-limited scenarios.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 3 Technical Description
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
6
http://rncmmlhtml/mbsc/m-para/gcellsoft_stircallowed.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_stircallowed.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode4.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode3.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode2.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode1.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
11/32
To enable the ADC algorithm, set ADAICFLAGto ON(On). In addition, you can set
ADAICADFLAGto ON(On) to improve the detection accuracy in adaptive scenarios.
l IfSTIRCALLOWED is set to YES(Yes), the ADC algorithm adaptively selects either
EICC or MRC.
l IfSTIRCALLOWED is set to NO(No), the ADC algorithm adaptively selects either ICC
or MRC.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 3 Technical Description
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
7
http://rncmmlhtml/mbsc/m-para/gcellsoft_stircallowed.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_stircallowed.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_adaicadflag.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_adaicflag.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
12/32
4 Related FeaturesFeature PrerequisiteFeature MutuallyExclusive Feature Affected Feature
2-Antenna Receive
Diversity
None None None
MRC MRFD-210604 2-
Antenna Receive
Diversity
None None
ICC MRFD-210604 2-
Antenna Receive
Diversity or
GBFD-115903 4-Way Receiver
Diversity
None None
EICC MRFD-210604 2-
Antenna Receive
Diversity
Automatic
Frequency
Correction (AFC)
NOTE
This feature is
disabled
automatically after
AFC is enabled.
None
ADC MRFD-210604 2-
Antenna Receive
Diversity
None None
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 4 Related Features
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
8
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
13/32
5 Impact on the Network
5.1 2-Antenna Receive Diversity
5.1.1 Impact on System Capacity
This feature improves the BTS uplink receive quality. Its algorithms are classified into MRC,
ICC, EICC, and ADC.
For CS services, after uplink power control is enabled for MSs, this feature decreases the entire
network interference and increases the traffic volume.
For PS services, this feature increases the uplink throughput.
5.1.2 Impact on Network Performance
This feature improves the BTS uplink receive quality.
5.2 MRC
5.2.1 Impact on System Capacity
This algorithm improves the uplink receive quality.
For CS services, after uplink power control is enabled for MSs, this algorithm decreases the
entire network interference and increases the traffic volume.
For PS services, this algorithm increases the uplink throughput.
5.2.2 Impact on Network Performance
This algorithm improves the uplink receive quality.
5.3 ICC
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 5 Impact on the Network
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
9
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
14/32
5.3.1 Impact on System Capacity
Compared with the MRC algorithm, the ICC algorithm enhances the network anti-interference
capability and improves the uplink receive quality.
For CS services, after uplink power control is enabled for MSs, this algorithm decreases the
entire network interference and increases the traffic volume.
For PS services, this algorithm increases the uplink throughput.
5.3.2 Impact on Network Performance
Compared with the MRC algorithm, the ICC algorithm enhances the network anti-interference
capability and improves the uplink receive quality.
5.4 EICC
5.4.1 Impact on System Capacity
Compared with the ICC algorithm, the EICC algorithm enhances the network anti-interference
capability and improves the uplink receive quality.
For CS services, after uplink power control is enabled for MSs, this algorithm decreases the
entire network interference and increases the traffic volume.
For PS services, this algorithm increases the uplink throughput.
5.4.2 Impact on Network Performance
Compared with the ICC algorithm, the EICC algorithm enhances the network anti-interference
capability and improves the uplink receive quality.
5.5 ADC
5.5.1 Impact on System Capacity
This algorithm can adaptively select an appropriate combining algorithm based on interferencescenarios on the live network. Compared with the fixed combining algorithm, this algorithm
further improves the network anti-interference capability and uplink receive quality.
For CS services, after uplink power control is enabled for MSs, this algorithm decreases the
entire network interference and increases the traffic volume.
For PS services, this algorithm increases the uplink throughput.
5.5.2 Impact on Network Performance
This algorithm can adaptively select an appropriate combining algorithm based on interference
scenarios on the live network. Therefore, this algorithm enhances the network anti-interferencecapability and improves the uplink receive quality.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 5 Impact on the Network
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
10
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
15/32
6 Engineering Guidelines
6.1 When to Use 2-Antenna Receive Diversity
6.1.1 2-Antenna Receive Diversity
Use this feature for outdoor BTSs.
6.1.2 MRC Algorithm
Use the MRC algorithm in the following conditions:
l The live network is in noise-limited scenarios, for example, railway coverage or rural area
coverage.
l The licenses for the ICC and EICC algorithms have not been obtained.
6.1.3 ICC Algorithm
Use the ICC algorithm in the following conditions:
l The live network is in interference-limited scenarios, for example, urban area coverage and
tight frequency reuse scenarios with strong interference.
l The license for the EICC algorithm has not been obtained.
6.1.4 EICC Algorithm
You are advised to use the EICC algorithm in interference-limited scenarios, such as city
coverage and tight frequency reuse scenarios with strong interference.
6.1.5 ADC Algorithm
Use the ADC algorithm in the following conditions:
l It is uncertain whether the live network is in the noise-limited or interference-limited
scenario.
l Interference scenario changes take place.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 6 Engineering Guidelines
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
11
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
16/32
6.2 Information to Be Collected
Before deploying this feature, collect the following information:
l Whether the cell is configured in 2-antenna receive mode
l Frequency planning data
l Cell coverage range
l Traffic volume on the network
l Whether there is interference in the radio environment
The MRC algorithm improves the network performance at the coverage edge when:
l The cell is configured in 2-antenna receive mode.
l The network frequencies are loosely set.
l The cell coverage is relatively large.
The ICC and EICC algorithms improve the network anti-interference capability when:
l The cell is configured in 2-antenna receive mode.
l The network frequencies are tightly set.
l The network interference is strong and traffic is heavy.
The ADC algorithm improves the uplink performance when:
l The cell is configured in 2-antenna receive mode.
l The network environment is uncertain or varies with time.
These four algorithms are not applicable to cells in one-antenna receive mode.
6.3 Network Planning
RF Planning
N/A
Network Topology
N/A
Hardware Planning
The two RX channels of the TRXs must be connected to two antennas, or connected to a dual-
polarized antenna.
6.4 Feature Deployment
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 6 Engineering Guidelines
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
12
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
17/32
6.4.1 2-Antenna Receive Diversity
For details about how to activate, verify, and deactivate this algorithm, see Configuring 2-
Antenna Receive Diversity.
6.4.2 Deploying MRC
Activation Procedure
Run the BSC6900 MML command SET GCELLSOFT with ICTYPset to MRC(MRC).
Verification Procedure
Run the BSC6900 MML command LST GCELLSOFT to query the value ofICTYP.
Expected result: IfICTYPis set to MRC(MRC), the MRC function has been enabled.
Deactivation Procedure
Run the BSC6900 MML command SET GCELLSOFT with ICTYPset to ICC(ICC).
6.4.3 Deploying ICC
For details about how to activate, verify, and deactivate this algorithm, see Configuring ICC.
6.4.4 Deploying EICCFor details about how to activate, verify, and deactivate this algorithm, see Configuring
EICC.
6.5 Performance Optimization
Monitoring
Observe network counters. For CS services, observe Uplink Quality (UL RxQual). If the counter
deteriorates or remains unchanged after the 2-antenna receive diversity feature has been enabled,
adjust the combining algorithms.
Parameter Optimization
The ICC algorithm achieves favorable network performance in most scenarios. For scenarios
without interference, the MRC algorithm is recommended. For scenarios with tight frequency
reuse, heavy traffic, and strong interference, the EICC algorithm is recommended.
If it is uncertain about the network interference scenarios, or interference scenario changes take
place, use the ADC algorithm.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 6 Engineering Guidelines
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
13
http://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://faghtml/mbsc/cme-feature-activation-guide/GBFD-115821.htmlhttp://faghtml/mbsc/cme-feature-activation-guide/GBFD-115821.htmlhttp://faghtml/mbsc/cme-feature-activation-guide/GBFD-115801.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.htmlhttp://faghtml/mbsc/cme-feature-activation-guide/MRFD-210604-2.htmlhttp://faghtml/mbsc/cme-feature-activation-guide/MRFD-210604-2.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
18/32
7 ParametersTable 7-1 Parameter description
Parameter ID NE MMLCommand
Feature ID Feature Name Description
ADAICADFL
AG
BSC6900 SET
GCELLSOFT
GBFD-115801 ICC Meaning:Wheth
er to enable the
adaptive
interference
cancellation
enhancement
function. If this
parameter is set
to ON, theadaptive
interference
cancellation
enhancement
function is
enabled. If this
parameter is set
to OFF, the
adaptive
interference
cancellation
enhancementfunction is not
enabled. It is
recommended
that this
parameter be set
to ON when
adaptive
interference
cancellation is
used.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
14
http://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_adaicadflag.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_adaicadflag.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
19/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
GUI Value
Range:OFF
(Off), ON(On)
Unit:None
Actual Value
Range:OFF, ON
Default
Value:OFF(Off)
ADAICFLAG BSC6900 SET
GCELLSOFT
GBFD-115801 ICC Meaning:Wheth
er to adaptively
select the
interference
cancellation
mode. If this
parameter is set
to ON, the BSC
adaptively
selects the
interference
cancellation
mode. If this
parameter is set
to OFF, the BSC
always selectsthe fixed
interference
cancellation
mode.
GUI Value
Range:OFF
(Off), ON(On)
Unit:None
Actual Value
Range:OFF, ON
DefaultValue:OFF(Off)
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
15
http://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_adaicflag.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
20/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
ICTYP BSC6900 SET
GCELLSOFT
GBFD-115801 ICC Meaning:Inter-
ference
cancellation
mode. When
tight frequency
reuse is used, it
is recommended
that this
parameter be set
to ICC. When
noises are
restricted, it is
recommended
that thisparameter be set
to MRC.
GUI Value
Range:MRC
(MRC), ICC
(ICC)
Unit:None
Actual Value
Range:MRC,
ICC
DefaultValue:MRC
(MRC)
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
16
http://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_ictyp.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
21/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
SndRcvMode BSC6900 SET
BTSRXUBP
GBFD-111202 O&M of BTS Meaning:The
connection
mode between
the DRRU and
the antenna.
GUI Value
Range:SGL_A
NTENNA
(Single Feeder
[1TX + 1RX]),
SGLDOUBLE_
ANTENNA
(Single Feeder
[1TX + 2RX]),DOUBLE_ANT
ENNA(Double
Feeder[2TX +
2RX]),
DOUBLEFOU
R_ANTENNA
(Double Feeder
[2TX + 4RX]),
DOUBLESING
LE_ANTENNA
(Double Feeder
[1TX + 1RX]),DOUBLEDOU
BLE_ANTENN
A(Double
Feeder[1TX +
2RX])
Unit:None
Actual Value
Range:SGL_A
NTENNA,
SGLDOUBLE_
ANTENNA,DOUBLE_ANT
ENNA,
DOUBLEFOU
R_ANTENNA,
DOUBLESING
LE_ANTENNA
,
DOUBLEDOU
BLE_ANTENN
A
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
17
http://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
22/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
Default
Value:DOUBL
E_ANTENNA
(Double Feeder
[2TX + 2RX])
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
18
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
23/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
SndRcvMode1 BSC6900 SET
BTSRXUBP
GBFD-111202 O&M of BTS Meaning:The
connection
mode between
the DRFU and
the antenna.
GUI Value
Range:SGL_A
NTENNA
(Single Feeder
[1TX + 1RX]),
SGLDOUBLE_
ANTENNA
(Single Feeder
[1TX + 2RX]),DOUBLE_ANT
ENNA(Double
Feeder[2TX +
2RX]),
DOUBLEFOU
R_ANTENNA
(Double Feeder
[2TX + 4RX]),
DOUBLESING
LE_ANTENNA
(Double Feeder
[1TX + 1RX]),DOUBLEDOU
BLE_ANTENN
A(Double
Feeder[1TX +
2RX])
Unit:None
Actual Value
Range:SGL_A
NTENNA,
SGLDOUBLE_
ANTENNA,DOUBLE_ANT
ENNA,
DOUBLEFOU
R_ANTENNA,
DOUBLESING
LE_ANTENNA
,
DOUBLEDOU
BLE_ANTENN
A
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
19
http://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode1.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
24/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
Default
Value:DOUBL
E_ANTENNA
(Double Feeder
[2TX + 2RX])
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
20
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
25/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
SndRcvMode2 BSC6900 SET
BTSRXUBP
GBFD-111202 O&M of BTS Meaning:The
connection
mode between
the MRRU/
GRRU and the
antenna.
GUI Value
Range:SGL_A
NTENNA
(Single Feeder
[1TX + 1RX]),
SGLDOUBLE_
ANTENNA
(Single Feeder[1TX + 2RX]),
DOUBLE_ANT
ENNA(Double
Feeder[2TX +
2RX]),
DOUBLEFOU
R_ANTENNA
(Double Feeder
[2TX + 4RX]),
DOUBLESING
LE_ANTENNA
(Double Feeder[1TX + 1RX]),
DOUBLEDOU
BLE_ANTENN
A(Double
Feeder[1TX +
2RX]),
FOURDOUBL
E_ANTENNA
(Four Feeder
[2TX + 2RX]),
FOURDOUBL
EFOUR_ANTE
NNA(Four
Feeder[2TX +
4RX])
Unit:None
Actual Value
Range:SGL_A
NTENNA,
SGLDOUBLE_
ANTENNA,
DOUBLE_ANT
ENNA,
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
21
http://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode2.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
26/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
DOUBLEFOU
R_ANTENNA,
DOUBLESING
LE_ANTENNA
,
DOUBLEDOU
BLE_ANTENN
A,
FOURDOUBL
E_ANTENNA,
FOURDOUBL
EFOUR_ANTE
NNA
DefaultValue:DOUBL
E_ANTENNA
(Double Feeder
[2TX + 2RX])
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
22
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
27/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
SndRcvMode3 BSC6900 SET
BTSRXUBP
GBFD-111202 O&M of BTS Meaning:The
connection
mode between
the MRFU/
GRFU and the
antenna.
GUI Value
Range:SGL_A
NTENNA
(Single Feeder
[1TX + 1RX]),
SGLDOUBLE_
ANTENNA
(Single Feeder[1TX + 2RX]),
DOUBLE_ANT
ENNA(Double
Feeder[2TX +
2RX]),
DOUBLEFOU
R_ANTENNA
(Double Feeder
[2TX + 4RX]),
DOUBLESING
LE_ANTENNA
(Double Feeder[1TX + 1RX]),
DOUBLEDOU
BLE_ANTENN
A(Double
Feeder[1TX +
2RX])
Unit:None
Actual Value
Range:SGL_A
NTENNA,
SGLDOUBLE_ANTENNA,
DOUBLE_ANT
ENNA,
DOUBLEFOU
R_ANTENNA,
DOUBLESING
LE_ANTENNA
,
DOUBLEDOU
BLE_ANTENN
A
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
23
http://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode3.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
28/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
Default
Value:DOUBL
E_ANTENNA
(Double Feeder
[2TX + 2RX])
SndRcvMode4 BSC6900 SET
BTSRXUBP
GBFD-111202 O&M of BTS Meaning:The
connection
mode between
the BTS3900E
and the antenna.
GUI Value
Range:SGL_A
NTENNA(Single Feeder
[1TX + 1RX]),
DOUBLESING
LE_ANTENNA
(Double Feeder
[1TX + 1RX]),
DOUBLEDOU
BLE_ANTENN
A(Double
Feeder[1TX +
2RX])
Unit:None
Actual Value
Range:SGL_A
NTENNA,
DOUBLESING
LE_ANTENNA
,
DOUBLEDOU
BLE_ANTENN
A
Default
Value:SGL_ANTENNA(Single
Feeder[1TX +
1RX])
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
24
http://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-mml/set-btsrxubp.htmlhttp://rncmmlhtml/mbsc/m-para/btsrxubp_sndrcvmode4.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
29/32
Parameter ID NE MMLCommand
Feature ID Feature Name Description
STIRCALLO
WED
BSC6900 SET
GCELLSOFT
GBFD-115821 EICC Meaning:Wheth
er to enable the
EICC algorithm.
Enhanced
Interference
Rejection
Combining
combines the
signals received
by multiple
antennas to
obtain better
signals. EICC is
mainly used inheavy-traffic
network where
tight frequency
reuse is in place.
GUI Value
Range:NO(No),
YES(Yes)
Unit:None
Actual Value
Range:NO, YES
DefaultValue:NO(No)
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 7 Parameters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
25
http://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-mml/set-gcellsoft.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_stircallowed.htmlhttp://rncmmlhtml/mbsc/m-para/gcellsoft_stircallowed.html -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
30/32
8 CountersThere are no specific counters associated with this feature.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 8 Counters
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
26
-
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
31/32
9GlossaryFor the acronyms, abbreviations, terms, and definitions, see the Glossary.
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 9 Glossary
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
27
http://en-us_topic_0000862934.html/ -
8/22/2019 2-Antenna Receive Diversity(GBSS14.0_02)
32/32
10 Reference Documents1. 3GPP TS 25.101, "User Equipment (UE) radio transmission and reception (FDD)"
2. 3GPP TS 25.211, "Physical channels and mapping of transport channels onto physical
channels (FDD)"
3. 3GPP TS 25.306, "UE Radio Access capabilities"
4. 3GPP TS 25.308, "UTRA High Speed Downlink Packet Access (HSPDA); Overall
description"
5. 3GPP TS 25.321, "Medium Access Control (MAC) protocol specification"
6. BSC6900 Feature List
7. BSC6900 Basic Feature Description
8. BSC6900 GSM Parameter Reference
9. BSC6900 GSM MML Command Reference
GSM BSS
2-Antenna Receive Diversity Feature Parameter Description 10 Reference Documents