2 2 1 thank you for choosing orbitsound 1 bar a70 qsg.pdf · subwoofer pairing: 1) long press...

Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press

soundbar Vol+ and Vol-

©2014 Orbitsound ltd.

Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press


TV OPTICALAUDIO OUT

1

3

LUZ AZUL FIJA: CONECTADO

PARPADEO LENTO LUZ AZUL: MODO CONEXIÓN

PARPADEO RAPIDO LUZ AZUL: MODO EMPAREJAMIENTO

SOLID BLUE LIGHT: CONNECTED

SLOW FLASH BLUE LIGHT: CONNECTING MODE

FAST FLASH BLUE LIGHT: PAIRING MODE

VOYANT BLEU: CONNECTÉ

VOYANT BLEU CLIGNOTANT LENTEMENT: EN MODE CONNEXION

VOYANT BLEU CLIGNOTANT RAPIDEMENT: CONNEXION ÉTABLIE

BLAUES DAUERLICHT: VERBUNDEN

BLAUES BLICKLICHT (LANGSAM): ANSCHLUSS- MODUS

BLAUES BLINKLICHT (SCHNELL): PAIRING-MODUS

BLAUW LICHT: VERBONDEN

LANGZAAM KNIPPEREN: BEZIG MET VERBINDEN

SNEL KNIPPEREN: VERBIND MODUS

YHTÄJAKSOINEN VALO: YHDISTETTY HIDAS VILKKUVALO: YHTEYDEN MUODOSTUS TILA

NOPEA VILKKUVALO: PARITUS TILA




KONSTANT BLÅT LYS: TILSLUTTET

LANGSOMT BLINK: SØGER TIDLIGERE TILSLUTTET

HURTIGT BLINK: SØGER NYE ENHEDER

1

Master thickness

1

1

2

2 2

3 4

1

1 2

3

2

1 2

32

21

Pair with Device?

NO YES

2

4

5

NFC Tag

Bluetooth (Hold to pair)

Volume +

Volume -

Input Source

Remote Control Learning

Power / Standby

Remote Learning

Remote Receiver

Optical Source

Bluetooth Source

AUX Source

Wireless Subwoofer Error/Pairing

Volume/Bass/Treble

Power/Mute

Centre Speakers

a i r S O U N D ™ S P E A K E R S

TV OPTICAL AUDIO OUT

3 2

Drill 2x6mm holes in wall, 644mm apart

Cable access

TV

Recommended Soundbar Placement

T O U C H PA N E L B U T T O N S

Display

Cable clip

T H A N K Y O U F O R C H O O S I N G O R B I T S O U N DThis guide is all you need to set up your ORBITSOUND BAR A70 to start enjoying natural and immersive room filling airSOUND™.

You can table or wall mount your soundbar with the included fixings. Please ensure the centre speakers and side airSOUND speakers are free from obstacles within 10cm to ensure the best sound.

C O N N E C T I N G Y O U R B A R A 7 0

2 ) C O N N E C T Y O U R T VConnect your TV using the optical cable included, Make sure to remove the protective caps on each end of the cable before plugging the cable in. Connect the optical cable (4) to your TV and soundbar.

1 ) C O N N E C T P O W E RConnect power to the rear of your soundbar (1) and subwoofer (2). Switch on the subwoofer power (3).

N O O P T I C A L O N T V ?If your TV doesn’t have an optical socket, connect using the 3.5mm AUX cable supplied to the audio out of your TV and the AUX input (5) on the soundbar.

BAR A70 Q U I C K S TA RT G U I D E

NFC Tag

Bluetooth (Hold to pair)

Volume +

Volume -

Input Source

Remote Control Learning

Power / Standby

Remote Learning

Remote Receiver

Optical Source

Bluetooth Source

AUX Source

Wireless Subwoofer Error/Pairing

Volume/Bass/Treble

Power/Mute

Centre Speakers

a i r S O U N D ™ S P E A K E R S

TV OPTICAL AUDIO OUT

3 2

Drill 2x6mm holes in wall, 644mm apart

Cable access

TV

Recommended Soundbar Placement

T O U C H PA N E L B U T T O N S

Display

Cable clip

Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press



Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press


TV OPTICALAUDIO OUT

1

3
























1

Master thickness

1

1

2

2 2

3 4

1

1 2

3

2

1 2

32

21

Pair with Device?

NO YES

2

4

5

Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press



Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press


TV OPTICALAUDIO OUT

1

3
























1

Master thickness

1

1

2

2 2

3 4

1

1 2

3

2

1 2

32

21

Pair with Device?

NO YES

2

4

5

Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press



Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press


TV OPTICALAUDIO OUT

1

3
























1

Master thickness

1

1

2

2 2

3 4

1

1 2

3

2

1 2

32

21

Pair with Device?

NO YES

2

4

5

Press and hold (3 seconds) LRN (1) to learn from a new remote. Press Vol+ on new remote when prompted (2), wait, then repeat when prompted by the soundbar. Repeat for Vol- when prompted. The system will confirm successful remote learning (2) and flash all lights.

The subwoofer is factory paired. To re-pair a subwoofer: Press and hold (3 seconds) subwoofer PAIR button (1), the subwoofer pair light will flash. Press and hold Vol - and Vol+ (2) on the soundbar together. The SUB light

To pair a Bluetooth device: Press and hold (3 seconds) the Bluetooth button (1), the Bluetooth light (2) will flash faster. Search for ‘Orbitsound A70’ on your device list and pair.

C O N N E C T I N G B L U E T O O T H

C O N N E C T W I T H N F C :Use NFC to easily connect. Make sure Bluetooth and NFC are enabled on your device. Place your device’s NFC tag close to the NFC logo on the soundbar. You will be prompted to pair.

Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press



Subwoofer Pairing:

1) Long Press

subwoofer PAIR;

STATUS will flash

2) Long Press


TV OPTICALAUDIO OUT

1

3
























1

Master thickness

1

1

2

2 2

3 4

1

1 2

3

2

1 2

32

21

Pair with Device?

NO YES

2

4

5

WA L L M O U N T I N G

NOTE: Tap the Bluetooth button (1) to disconnect or to reconnect your device easily. You can use the Play controls on the Orbitsound remote to control bluetooth audio playback.

D O E S Y O U R D E V I C E H AV E N F C ?

L E A R N I N G T V R E M O T E V O L U M E

If it did not work no lights will flash, try again and use short presses on the new remote, and wait to be prompted for a press. Note: the BAR A70 can learn from many popular remotes. It is not compatible with all remote controls. Please refer to website for details.

PA I R I N G T H E S U B W O O F E R

(3) will flash. The soundbar and subwoofer will connect. When the SUB light (3) lights without flashing, the system is paired.

IMPORTANT: WALL MOUNTING TO BE DONE ONLY BY AN EXPERIENCED PROFESSIONAL. ORBITSOUND ACCEPT NO LIABILITY FOR DAMAGE DUE TO IMPROPER OR UNSAFE WALL MOUNT INSTALLATION

Ensure the wall is suitible for the wall plugs provided. Drill holes in your wall as shown to fit the plugs and

screws. Carefully hang the A70 as shown.

F R E Q U E N T LY A S K E D Q U E S T I O N S

Subwoofer STATUS light: On: Connected and working. Flashing: Looking for soundbar. Off: Low power mode

PROBLEMS? You may need to clear the Bluetooth memory if the subwoofer does not pair. Press and hold Bluetooth AND Source buttons for 3 seconds, then proceed to pair the subweoofer as above.

There is no sound from the subwoofer

Check that power to subwoofer is ON. Restart soundbar. If the wireless subwoofer error light on the sound bar is solid red, please follow “pairing the subwoofer” instructions above.

No Sound from optical (TV) source, No Sound from optical Set-Top-Box (STB) source, Loud noise when watching HD channels on optical

Please check your TV or STB settings. Make sure that the optical output format is set to ‘STEREO’ or ‘PCM’ format. This is the correct format for the sound bar.

(Factory reset) I need to reset my settings

Press and hold SRC and POWER on the soundbar for 3 seconds. All lights will flash to show a reset has happened.

I cannot make my soundbar learn from my remote. When I complete learning process, no lights flash.

Please note: Not all remotes are supported with our learning process. Check the website for

compatability information. If your remote should work but is not, make sure you are aiming the remote at the IR receiver (near the light panel). Make sure you tap the key on the remote to be learned once when shown to by the sound bar, and repeat when shown.

Switching from TV to Bluetooth, there is a big volume difference - the TV is quiet.

Some TVs reduce the volume of sound that comes out of the optical port. You will need higher volume settings on the soundbar to compensate. This is normal.

How do I position my soundbar to get the best sound?

Simply make sure that the side speakers are clear from obstacles. The subwoofer is wireless, but the best sound is achieved when the subwoofer is within 5m of the soundbar, and in the same general area.

My remote control is not workingEnsure the battery protection film has been removed. Pull the tab and remove.

The optical cable does not work Please check the optical cable and remove any protective covers from connectors. Check the optical output format is PCM or STEREO on your source.

I’m using Bluetooth and sometimes the sound is interrupted

Bluetooth is a short range wireless technology. We recommend you keep your bluetooth device in the same room as the sound bar and not obstructed by walls or metallic objects as they can block the signal. Please do not place other wireless devices such as wireless routers, cordless telephones and microwave ovens close to your sound bar as they can interfere with the Bluetooth connection.

I need more informationPlease visit www.orbitsound.com to download the full product user manual or contact a customer support representative. www.orbitsound.com/support

©2016 Orbitsound Ltd.

2 2 1 thank you for choosing orbitsound 1 bar a70 qsg.pdf · subwoofer pairing: 1) long press...

Documents