17stp_029-12-07-en
TRANSCRIPT
-
8/12/2019 17STP_029-12-07-EN
1/2
S.T.P. 029
Page 1 of 2.Technical SpecificationDATE: Dicembre 2007
DESIGN FOR ENVIRONMENTGOVERNMENT REGULATORY CHANGE ON AFTERMARKET PRODUCTION
END OF LIFE VEHICLE (ELV)
EMESSO DA:M. Allais 12/2007
2 12/2007 Inserito 6262E (STP039)
APPROVATO DA:
P. Fassio 12/20071 04/2006 Agg. pto. 6 (11SMnPb37) e inserito AA6012 in pto 5
0 11/2005 Prima emissione (zincatura) tutte
ESP. DATA DESCRIZIONE MODIFICA PAGINE
This specification is copyright and the property of NUOVA TECNODELTA SpA. It must not be copied (in whole or in part), used for manifacture or otherwise disclosed whitout prior written consent ofthe company. Any copies of this specification made by any method must also include a copy of this legend. Nuova tecnodelta Spa. 2000.
NUOVA
TECNODELTAS.p.A.
HYDRAULIC PARTS FOR BRAKES AND CLUTCHES
FRAZ. POCOLA, 62 14016 TIGLIOLE (AT) ITALIATEL. 0141/668111 FAX 0141/668145
NUOVA
TECNODELTAS.p.A.
HYDRAULIC PARTS FOR BRAKES AND CLUTCHES
FRAZ. POCOLA, 62 14016 TIGLIOLE (AT) ITALIATEL. 0141/668111 FAX 0141/668145
1 Scope
Identify the material / treatment eliminated and the new material / treatment that will replace them approved by theEuropean ELV directive (End of life vehicle).
Identify the alternative material / treatment that improve the environment product impact. The optional solutionintroduce an improvement even if the actual solution is allowed by the ELV Directive. These solution has to beconsidered as a NOT MANDATORY requirements but as suggested solution to be preferred if and only if they haveeconomical advantages.
This specification modify the requirements on material / treatment specified on NUOVA TECNODELTA drawingemitted prior the date of this specification revision (see point 4 previous drawing).
2 Application
This specification apply to all product designed and property of Nuova Tecnodelta Spa for aftermarket production andits integral part of our purchasing order
It do not apply to the drawings / products property of our Customer (Original Equipment production) on which thematerial / treatment technical definition is responsibility of our Customer.
3 Reference standard / Government Regulatory
- European End of life vehicle (ELV) Directive CEE/CEEA/CE 2000/53, and modifications
- STP026 Nuova Tecnodelta - Restricted substance materials standard
- STP039 6262E - Specification for ELV aluminium extrusion / forging for the manufacture of machined hydrauliccomponents (low lead / lead free)
4 Previous drawingThe material / treatment specification on the drawing with drawing approval date prior to the last revision of thisspecification are eliminated and replaced by the new one as defined in point 5 of this specification.
In case of product outsourced (Supplier process) concession on these requirements has to be agreed with NuovaTecnodelta purchasing department during the initial request for quotation phase and has to be accepted by NuovaTecnodelta in written form on purchasing contract.
-
8/12/2019 17STP_029-12-07-EN
2/2
S.T.P. 029
Page 2 of 2.Technical SpecificationDATE: April 2006
DESIGN FOR ENVIRONMENTGOVERNMENT REGULATORY CHANGE ON AFTERMARKET PRODUCTION
END OF LIFE VEHICLE (ELV)
This specification is copyright and the property of NUOVA TECNODELTA SpA. It must not be copied (in whole or i n part), used for manifacture or o therwise disclosed whitout prior written consent ofthe company. Any copies of this specification made by any method must also include a copy of this legend. Nuova tecnodelta Spa. 2000.
NUOVA
TECNODELTAS.p.A.
HYDRAULIC PARTS FOR BRAKES AND CLUTCHES
FRAZ. POCOLA, 62 14016 TIGLIOLE (AT) ITALIATEL. 0141/668111 FAX 0141/668145
5 Material / Treatment REPLACEDMATERIAL / TREATMENT
ELIMINATED: REPLACED BY:SOP
(MANDATORY)
Zinc finishYELLOWFe/Zn 7 III (Cr6)According to FIAT 9.57405
Zinc finishWHITEFe/Zn 7 II (Cr6 free)According to FIAT 9.57405
11/2005
Zinc finishBLACKFe/Zn 7 VI (Cr6)According to FIAT 9.57405
Zinc finishWHITEFe/Zn 7 II (Cr6 free)According to FIAT 9.57405
11/2005
Alluminum AlloyAA 6012
According to UNI EN 573/3
Alluminum AlloyAA 6262
According to UNI EN 573/3
03/2006
Alluminum AlloyAA 6262According to UNI EN 573/3
Alluminum AlloyAA 6262EAccording to STP039Optional: AA6082According to UNI EN 573/3
03/2008
6 Alternative Material / Treatment (OPTIONAL)
MATERIAL / TREATMENTCURRENT SOLUTION OPTIONAL SOLUTION
SOP(NOT MANDATORY)
Free-cutting steel11SMnPb37 (+C)According to UNI EN 10277-3(Pb < 0,35% allowed by Annex II - 2000/53CE)
Free-cutting steel11SMn37 (+C)According to UNI EN 10277-3(Lead-free)
03/2006
Free-cutting steel36SMnPb14 (+C) - (R80)
According to UNI EN 10277-3(Pb < 0,35% allowed by Annex II - 2000/53CE)
Free-cutting steel36SMn14 (+C) - (R80)
According to UNI EN 10277-3(Lead-free)
03/2006
ATTENTION: BELOW ARE LISTED THE OPTIONAL SOLUTION THAT BETTER IMPROVE (WITH
REFERENCE TO ELV DIRECTIVE 2000/53) THE ENVIRONMENT PRODUCT IMPACT AND THEY ARE TOBE PREFERRED IF AND ONLY IF THEY HAVE ECONOMICAL OR TECHNICAL ADVANTAGES.