1768-rn010_-en-p
DESCRIPTION
1768-rn010_-en-pTRANSCRIPT
-
Release Notes
CompactLogix EtherNet/IP Communication Module, Firmware Revision 3.001
Catalog Number 1768-ENBT
About This PublicationThis publication describes enhancements, anomalies (corrected and known), and other concepts related to the CompactLogix EtherNet/IP Bridge Module, firmware revision 3.001.
In addition to information specific to the most recent firmware revision, the information from previous minor revisions is retained in these release notes for your reference.
Topic Page
About This Publication 1
Compatible Versions of Software 2
Enhancements 3
Known Anomalies 3
Corrected Anomalies 4
Application Notes 5
-
2
Compatible Versions of Software
Use these or later versions of software with the 1768-ENBT module.
If using Use this version or later
RSLinx Classic software 2.43
RSLinx Enterprise software 3.00
RSLogix 5000 programming software
15.00
RSNetWorx for EtherNet/IP 5.11Publication 1768-RN010A-EN-P - February 2010
-
3
Enhancements
This table lists the enhancements for the 1768-ENBT module.
Known AnomaliesNo known anomalies have been identified with this firmware revision.
Firmware Revision Enhancement Description
3.001 Added support for Compact GuardLogix controllers.
The 1768-ENBT module now supports Compact GuardLogix controllers.
Lgx00090419
2.003 The link between a TCP connection and the associated CIP connection has been decoupled.
TCP connections can be closed without affecting existing CIP connections.
Lgx00074715
The number of TCP and CIP connections has been increased.
The number of TCP and CIP connections has been doubled to 64 TCP connections and 128 CIP connections.Publication 1768-RN010A-EN-P - February 2010
-
4
Corrected AnomaliesThese anomalies have been corrected with firmware revision 2.003.
Corrected Anomaly Description
Connecting to a device with a rapid response time may result in a timeout.
When connecting to a device with a more rapid response time (for example, a computer or a 1768-EN2T module), the 1768-ENBT modules attempt to open the TCP connection may time out.
The timeout occurs because the faster device has sent a reply to the 1768-ENBT module before the 1768-ENBT module socket is fully open and the module is unprepared to receive the reply. The 1768-ENBT module misses the reply and the TCP connection times out.
This firmware revision corrects this anomaly by preparing the 1768-ENBT module to receive the reply earlier.
Lgx00079880
Extensive access of the modules web pages affects functionality.
The 1768-ENBT module faults when several users access the modules web pages at the same time.
This firmware revision corrects this anomaly by making more memory available for the web pages to function properly when accessed by several users.
Lgx00080499
Use of a 000.000.000 subnet mask results in a network error.
When the 1768-ENBT modules subnet mask is set to 000.000.000, the module is not recognized on the network.
This firmware revision corrects this anomaly by using a different IP-mask verification algorithm.
Lgx00078991
Specifying a host name results in missing profile information.
If the 1768-ENBT module is configured to use a host name rather than an IP address, other module properties do not display properly.
When you use a host name, the Module Info, Port Configuration, and Port Diagnostics tabs of the Module Properties dialog box do not display module information.
Lgx00078678Publication 1768-RN010A-EN-P - February 2010
-
5
Publication 1768-RN010A-EN-P - February 2010
Application NotesWe recommend the following when you use the module:
It is IMPORTANT that the speed and duplex settings on the 1768-ENBT module are configured indentically to the settings on the switch port that the module is connected to (that is, both autonegotiate, or both manually set to 100/FULL). A mismatch in speed and duplex settings could result in significant reduction of system performance.
Connection timeouts could occur between QoS-enabled products and older products that do not support QoS. Rockwell Automation has released new firmware in various products to address this incompatibility. Refer to Knowledgebase document, Tech Note 66325, for a listing of compatible product firmware. The document is available for download at:
http://www.rockwellautomation.com/knowledgebase/
-
6
Additional ResourcesThese documents contain additional information related to the 1768-ENBT module.
You can view or download publications at http://www.rockwellautomation.com/literature. To order paper copies of technical documentation, contact your local Rockwell Automation distributor or sales representative.
Resource Description
1768-ENBT CompactLogix EtherNet/IP Communication Module Installation Instructions, publication 1768-IN002
Provides details about module installation and troubleshooting, as well as module technical specifications.
EtherNet/IP Modules in Logix5000 Control Systems User Manual, publication ENET-UM001
Provides details about how to assemble and mount the controller, how to upgrade firmware, and controller technical specifications.
CompactLogix EtherNet/IP Communication Module Release Notes, publication 1768-RN001
Provides details about previous firmware revisions and anomaly corrections.Publication 1768-RN010A-EN-P - February 2010
-
7
Notes:Publication 1768-RN010A-EN-P - February 2010
-
Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products. At http://www.rockwellautomation.com/support/, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.For an additional level of technical phone support for installation, configuration, and troubleshooting, we offer TechConnect support programs. For more information, contact your local distributor or Rockwell Automation representative, or visit http://www.rockwellautomation.com/support/.
Installation AssistanceIf you experience a problem within the first 24 hours of installation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your product up and running.
New Product Satisfaction ReturnRockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.
Documentation Feedback Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://literature.rockwellautomation.com.
Allen-Bradley, Rockwell Software, Rockwell Automation, EhterNet/IP, RSLinx Classic, RSLinx Enterprise, RSLogix 5000, RSNetworx for EtherNet/IP, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
United States or Canada 1.440.646.3434
Outside United States or Canada
Use the Worldwide Locator at http://www.rockwellautomation.com/support/americas/phone_en.html, or contact your local Rockwell Automation representative.
United States Contact your distributor. You must provide a Customer Support case number (call the phone number above to obtain one) to your distributor to complete the return process.
Outside United States Please contact your local Rockwell Automation representative for the return procedure.Publication 1768-RN010A-EN-P - February 2010 PN-66501Copyright 2010 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
1768-RN010A-EN-P, CompactLogix EtherNet/IP CommunicationModule, Firmware Revision 3.001 Release NotesAbout This PublicationEnhancementsKnown AnomaliesCorrected AnomaliesAdditional ResourcesBack Cover
Introduction_Catagory Types
This tab summarizes Rockwell Automation Global Sales and Marketing preferred printing standards. It also provides guidance on whether a publication should be released as JIT (print on demand) or if it requires an RFQ for offset printing.Find your publication type in the first section below. Use the assigned Printing Category information to determine the standard print specifications for that document type. The Printing Categories are defined below the Publication Type section. Note there may be slightly different print specifications for the categories, depending on the region (EMEA or Americas).For more information on Global Sales and Marketing Printing Standards, see publication RA-CO004 in DocMan.
Publication Type and Print Category
Publication TypeOff Set Print Category Spec. (See table below)JIT Spec. (See table below)DescriptionOrder Min **Order Max **Life Cycle Usage / Release Option
ADNA - PuttmanNAAdvertisement Reprint ColourNANAPresale / Internal
APA3D2Application Solution or Customer Success Story5100Presale / External
ARNANAArticle/Editorial/BylineNANAPresale / Internal
(press releases should not be checked into DocMan or printed)
ATB3, B4D5Application techniques5100Presale / External
BRA2 Primary, A1NABrochures5100Presale / External
CAC2 Primary, C1NACatalogue150Presale / External
CGNANACatalogue Guide150Presale / External
CLNANACollection550Presale / External
COA5, A6, A9D5Company Confidential InformationNANANA / Confidential
CPE-onlyE-only, D5Competitive Information550NA / Confidential
DCE-onlyE-onlyDiscount SchedulesNANAPresale / Internal
DIA1, A3NADirect Mail5100Presale / Internal
DMNANAProduct Demo550Presale / Internal
DSB3D5Dimensions Sheet15Post / External
DUB3D5Document Update15Post / External
GRB2D6Getting Results15Post / External
INB3 Primary, B2D5, D6Installation instructions15Post / External
LMNANALaunch Materials550Presale / Internal
PCB3D5Packaging Contents
PLE-only primary, B3E-onlyPrice List550Presale / Internal
PMB2D6Programming Manual15Post / External
PPA3D1Profile (Single Product or Service). NOTE: Application Solutions are to be assigned the AP pub type.5100Presale / External
QRB2 primary, B3, B5D5, D6Quick Reference15Post / External
QSB2 primary, B3, B5D5, D6Quick Start15Post / External
RMB2D5, D6Reference Manual15Post / External
RNB3D5Release Notes15Post / External
SGB1 Primary, B4D5, D6Selection Guide Colour550Presale / External
SGB2D5, D6Selection Guide B/W550Presale / External
SPA1, A2, A3, A4NASales Promotion NOTE: Service profiles are to be assigned the PP pub type.5100Presale / Internal
SRB2, B3D5, D6Specification Rating Sheet5100Presale / External
TDB2 Primary B3, B4, B5D5, D6Technical Data550Presale / External
TGB2, B3D6Troubleshooting Guide15Post / External
UMB2 Primary, B4D6User Manual B/W15Post / External
WDB3D5Wiring Diagrams / Dwgs15Post / Internal
WPB3 Primary, B5D5White Paper550Presale / External
** Minimum order quantities on all JIT items are based on the publication length. **
Publication lengthMinimum Order Quantity
77 or more pages1 (no shrink wrap required)
33 to 76 pages25
3 to 32 pages50
1 or 2 pages100
Pre-sale / MarketingAll paper in this category is White Brightness, 90% or better. Opacity 90% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
A14 color170 gsm 2pp100# gloss cover, 100# gloss text
A24 color170 gsm , folded, 4pp100# gloss cover, 80# gloss text
A34 colorCover 170 gsm with Body 120 gsm, > 4pp80# gloss cover, 80# gloss text
A42 color170gsm Silk 120gsm Silk80# gloss cover, 80# gloss text
A52 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet text
A61 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet text
A74 color cover2 color textSelection GuideCategory being deleted10 Point Cover C2S50# matte sheet text
A84 color coverCategory being deleted50# matte sheet text, self cover
2 color text
Selection Guide
A92 color100gsm bond50# matte sheet text, self cover
Selection Guide
Gray shading indicates Obsolete Print Catagories
Post Sale / Technical Communication
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
B14 color cover270gsm Gloss 100gsm bond10 Point Cover C2S
2 color text50# matte sheet text
B21 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text
B31 color100gsm bond50# matte sheet text, self cover
B42 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text
B52 color100gsm bond50# matte sheet text, self cover
Catalogs
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
C14 color cover270gsm Gloss 90gsm silk10 Point Cover C2S
4 color text45# Coated Sheet
C24 color cover270gsm Gloss 80gsm silk10 Point Cover C2S
2 color text32#-33# Coated Sheet
JIT / PODAll paper in this category is White Brightness, 82% or better. Opacity 88% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
D14 color170gsm white silk80# gloss cover, coated 2 sides
D24 color120gsm white silk80# gloss text, coated 2 sides, self cover
D34 colorCover 170gsm with Body 120gsm80# gloss cover, 80# gloss text coated 2 sides
D41 color160gsm tab90# index
D51 color80gsm bond20# bond, self cover
D61 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond
D72 color160gsm tab90# index
D82 color80gsm bond20# bond, self cover
D92 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond
D10Combination: 4 color cover, with 2 color bodyCover 160gsm with Body 80gsm90# index, 20# bond
Gray shading indicates Obsolete Print Catagories
Print Spec Sheet
JIT Printing SpecificationsRA-QR005F-EN-P - 8/07/2009
Printing SpecificationYOUR DATA HEREInstructionsNO
(required) Category:D5Select Print Category A,B,C or D from category list, on "Introduction_Catagory Types" tab11 x 17LOOSE -Loose LeafYESPre-sale / MarketingTOP
(required) Finished Trim Size Width:4.75 x 7 (slightly smaller half-size)8.5 x 11PERFECT - Perfect BoundA1LEFT
(required) Publication Number :1768-RN010A-EN-PSample: 2030-SP001B-EN-P3 x 5SADDLE - Saddle StitchA2RIGHTCORNER
Use Legacy NumberNOYES or NO18 x 24 PosterPLASTCOIL - Plastic Coil (Coil Bound)A4BOTTOMSIDE
Legacy Number if applicable:Sample Legacy Number: 0160-5.3324 x 36 PosterSTAPLED1 -1 positionA3
Publication Title:CompactLogix EtherNet/IP Communication Module, Firmware Revision 3.001Sample: ElectroGuard Selling Brief36 x 24 PosterSTAPLED1B - bottom 1 positionA5
(required) Business Group:Marketing CommercialAs entered in DocMan4 x 6STAPLED2 - 2 positionsA6
(required) Cost Center:19021As entered in DocMan - enter number only, no description. Example - 19021CMKMKE CM Integrated Arch - 19021CMKMKE Market Access Program - 191054.75 x 7 (slightly smaller half-size)THERMAL - Thermal bound (Tape bound)A7
Binding/Stitching:SADDLE - Saddle StitchReview key on right...Saddle-Stitch Items All page quantities must be divisible by 4.80 pgs max. on 20# (text and cover)76 pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24# (text and cover)
Perfect Bound Items940 pgs max. w/cover (90# index unless indicated otherwise)
Coil Bound Items580 pgs max. of 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise)
Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover (90# index unless indicated otherwise)
Double Wire Bound Items80 pgs max. on 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise)4.75 x 7.75THERMALO - Thermal Bound (Tape bound - offline)A8
(required) Page Count of Publication:8Total page count including cover5.5 x 8.5 (half-size)Wire O - Double Wire Bound (offline)A9
Paper Stock Color:whiteWhite is assumed. For color options contact your vendor.6 x 4Post Sale / Technical Communication
Number of Tabs Needed:5 tab in stock at RR Donnelley7.385 x 9 (RSI Std)B1
Stitching Location:SIDEBlank, Corner or Side8.25 x 10.875B2
Drill Hole YES/NONOAll drilled publications use the 5-hole standard, 5/16 inch-size hole and a minimum of inch from the inner page border.8.25 x 11 (RA product profile std)B3None
Glue Location on Pad:Glue location on pads8.375 x 10.875B4Half
Number of Pages per Pad:Average sheets of paper.. 25, 50 75,100 Max9 x 12 (Folder)B5C
Ink ColorBlackOne color assumes BLACK / 4 color assume CMYK / Indicate PMS number hereA4 (8 x 11 ) (210 x 297 mm)CatalogsDbleParll
Used in Manufacturing:YesA5 (5.83 x 8.26) (148 x 210 mm)C1Offset Z
Fold:HalfSample
Comments:This is a small release note, folded in half and stapled along the side.C2Short
Part Number:PN-66501JIT / PODV
D1Z
D2Microfold
D3
D4
D5
D6
D7
D8
D9
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Average /GrayImageResolution 300 /GrayImageDepth 8 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true /GrayImageFilter /FlateEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice