8/19/2019 1738 1 G 170SeriesBottleHeatshrinkShapeswithRib(VGStyle)

1/2

Item # 1738-1-G, 170 Series Bottle Heatshrink Shapes with Rib (VG Style)

Specifications  · Recovered Dimensions Fully Shrunk  · Application  · Technical Capabilities  · Inventory

A wide range of specially formulated materials are available for many applications and performance requirements. Custom shapes andmaterials are available to suit special specifications.

Expanded (Min) H 0.79

Expanded (Min) J 0.79

Recovered (Max) H 0.65

Recovered (Max) J 0.18

Material1 Fluid Resistant Flame Retarded Elastomer 

Specification VG 95343 PART 6

Adhesive Options

None1 Part Epoxy 200ºCGeneral Purpose Hot Melt +80ºCHigh Performance Hot Melt +105ºC

P ±10% 1.26

R ±10% 0.39T ±10% 0.00

O ±10% 0.87

HW ±20% 0.04

W ±20% 0.04

Heat shrinkable molded shapes combine the advantages of quick, easy installation, with highelectrical strength, mechanical toughness and superior chemical & environmental resistance.These products offer important functional and cost saving benefits for electrical and electronicapplications ranging from insulation & protection of individual components to fabrication of 

Specifications

Recovered Dimensions Fully Shrunk

Application

Bottle Shapes With Rib-VG StyleThis style provides cable strain relief in applications of partially loaded connectors, resulting in small cable diameters.

Dimensions apply to all materials unless otherwise indicated and are in inches.This unit is without end ribs.

PLEASE NOTE: When ordering parts with L material, the modification # changes, due to expansion detail changes. Please consultmain office for correct call-out.

Whitmor/Wirenetics27737 Avenue HopkinsValencia, CA 91355Phone: (661) 257-2400 • Fax: (661) 257-2495Email: sales@wirenetics.com • Website: www.wireandcable.com

2/23/2016 | P

http://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#Inventoryhttp://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#Technical%20Capabilitieshttp://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#Applicationhttp://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#Recovered%20Dimensions%20Fully%20Shrunkhttp://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#Specificationshttp://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#http://wire-cable-tubing.wireandcable.com/printitem/bottle-heatshrink-shapes/series-bottle-heatshrink-shapes-with-rib-vg-styl-2/1738-1-g?dlpdf=t#http://www.wireandcable.com/mailto:sales@wirenetics.com

8/19/2019 1738 1 G 170SeriesBottleHeatshrinkShapeswithRib(VGStyle)

2/2

Applicationscomplete inter-connecting cable harness assemblies.

The use of our heat shrink molded shapes in conjunction with our specialized heat shrink tubingproducts make it easy to fabricate completely sealed wire/cable harnessing & inter-connectionsystems of the highest quality. Heat shrink shapes are available with a wide range of highperformance adhesives/encapsulates to ensure the proper amount of strain relief, mechanicalsupport and environmental protection.

esides our abilities to make custom parts and compounds, we have a full service support team that can assist you from concept toesign and production. Allow use to use our considerable knowledge to make your requirements possible.

Our vast inventory includes three stocking locations of standard products. Off the shelf products include many different compound typesnd pre-installed adhesives. Because of our supplier partnering relationships, we are able to carry and manage any special inventoryems you may need.

Technical Capabilities

nventory

2/23/2016 | P