16.10 site equipment (72dpi)
DESCRIPTION
Peri working platformTRANSCRIPT
pro
du
ct r
ang
e 16
.10
PERI Site Equipment
Stopend systems
Wall clamps
PERI BIO CLEAN
Drying locker
PERI P 80 trestle
Accessories
Pallets and containers
10
Edition 05/2003
PERI GmbHP.O.Box 12 6489259 WeissenhornTel.: 0 73 09 / 9 50-0Fax: 0 73 09 / 9 [email protected]
Important notes:
Our products are to be used in accordance withthe relevant national and european safety regula-tions.
The illustrations in this brochure are photographsof real site situations. Safety or formwork anchordetails are therefore not to be taken as a definitiveguide to the way the equipment is to be used.
Safety precautions and allowable loads are to bestrictly observed. Separate structural calculationsare required for any deviations from the standarddesign data.
The information contained herein is subject totechnical change in the interests of progress.
© Copyright by PERI GmbH
111
PageContents
PERI stopend systemsfor suspended and ground slabs 2-3
PERI wall clamps 4
PERI BIO CLEAN concrete release agent 5
Klima TS 2000drying locker 6
PERI P 80 trestleAccessories for your site 7
PERI pallets and containers 8-9
Overview of range 10-19
PERI international 20-21
2
PERI offers two stopendsystems for slabs:
The 105 slab stopend bar forvertical slab formwork
– For slabs 500 mm deep– Spindle with up to 140 mm of
adjustment for accuratealignment of stopends withexisting concrete and formwork
– The HSGP HANDSET post canbe inserted to provide a safetyhandrail system
You use the same anchor unit forboth systems:
The 15 stopend sleeveItem no 0650391. 2.Nail plug to Push sleeve on –the formlining that’s all there
is to it!
Using 105 stopend bar
Slabs up to 50cm deep can beshuttered with this bar without anyproblems. See the table below formaximum spacings.
PERI Stopend Systemsfor suspended and ground slabs
Maximum spacings (m) depending onthe slab depth.
Slab depth (m) 0.20 0.30 0.40 0.50
Allowingfor load on 1.45 1.10 0.90 0.80handrail post
Not allowingfor load on 3.00 1.60 1.20 1.00handrail post
The maximum deflection at the top has beenlimited to 3mm.
HANDSETHSGP handrail postItem no 034580Simply insert!Handrail height = 1.05m
105 slab stopend bar
Wing nutcounterplateItem no 030110
B 15 tie rodl = 300mmItem no 030150
Adjustment range of 140mm
Stopend sleeveItem no 065039
wit
h 5
00m
md
eep
sla
b
max
500
min
100
82
150
6 x
80 =
480
adju
stm
ent
ran
ge
View of105 slab stopend bar
nail
sleeveplug
The formwork bracket 2 forslab overhangs and verticalslab stopends
– Free-running nut for tightening– Shear force taken by tapered
wall supports– Striking release– Vertical slab stopends are also
possible with this bracket– The HSGP HANDSET post can
be inserted to provide a safetyhandrail system
3
Using formwork bracket 2
Overhangs of up 450 mm forslabs up to 300 mm deep can beshuttered with this bracket. Seethe following table for maximumpermissible spacings, dependingon the depth and overhang of theslabs.
Stopend bracket adjustable forstriking from ground slab etc.
You can shutter ground slabs upto 60 cm deep quickly andefficiently with this bracket. It isanchored to the ground with therecoverable peg. Suspended slabstopends can also be shutteredwith the stopend bracket.
Maximum spacings (m) depending onthe slab depth and overhang.
Slab depth (m) Overhang (m)
0.20 0.30 0.40 0.45
0.20 2.50 2.50 1.85 1.60
0.30 1.00 1.00 1.00 1.00
These are the maximum spacings possiblewithout overloading the formwork bracket.However, closer spacings may be needed tosupport the formlining properly. With thespacings in the table, the maximum anchorforce is 6.5kN and the maximum shear force5.3kN.
HANDSETHSGP handrail postItem no 034580Simply insert!Handrail height = 1.05m
Formwork bracket
140
Tapered wallsupport to takeshear force
Wing nut counterplateItem no 030110
B 15 tie rodl = 300mmItem no 030150
Striking release
Stopend sleeveItem no 065039
View offormwork bracket 2
110
225
adju
stm
ent
ran
ge
min
250
max
470
Sla
b d
epth
max
. 300
Slab overhangmin. 15mm
max. 480mm
82
10/12 timbers
4
The PERI 55, 75 and 105wall clamps have a uniqueadjusting mechanism ratherthan wedges.
– No worn wedges– Fine adjustment with the swivel
nut– The thread and powder coating
prevent concrete adhering– Practical, robust design– The square thread on the arm
is selfcleaning and robust– The 105 can also be fitted with
an extension
PERI Wall ClampsThe first to have adjusting nuts
The 105 wall clamp for shuttering0.90m wide wall footings.
55 wall clampmaximum span 550 mm
When using the maximumpour height of 300 mm, werecommend a spacing of1.20 m for foundations etc.
105 wall clampmaximum span 1050 mm
When using the maximumpour height of 500 mm, werecommend a spacing of0.80 m for foundations etc.
75 wall clampmaximum span 750 mm
When using the maximumpour height of 400 mm, werecommend a spacing of1.00 m for foundations etc.
The 75 wall clamp for fixingprecast parapet sections.
5
PERI BIO CLEANThe biological release agentfor all forms and equipment
PERI BIO CLEAN is available in a205 litre drum or 20 litre can.
Weight kg Item no.
PERI BIO CLEAN
20 l 0.91/L 031440205 l 0.91/L 031450
Weight kg Item no.
Sprayer for PERI CLEAN andPERI BIO CLEAN 4.44 031520Capacity 5 litres
Spray nozzle 0.064 031530(0.1F 110)
PERI Bio Cleanis suitable for the construction ofdrinking water containersconforming to KTW recommen-dations and fulfills the require-ments of the DVGW, WorkingPaper W 270.
PERI BIO CLEAN:- Is a liquid, chemically and physi-
cally effective concrete releaseagent on a mineral oil basis.
- Applicable for all normal tradeformwork and constructionappliances.
Area of use:- Both for absorbent as well as
non-absorbent formwork linings.- Creeping oil characteristics
regenerate resinous formworksurfaces.
- Protects timber parts fromrotting, fungus etc.
- Prevents rust on constructionplant and machinery etc.
- Makes threads on props andspindles easily movable.
Application:- Spray the sides of the units in
the stack before the first use.- Spray the reverse side of the
formwork after the first erectionand repeat about every 4 weeks.
- Spray immediately after strikingbecause Bio Clean loosensadhesive concrete and thusreduces the cleaning work.
- Working temperature:- 200 C to + 500 C
- Consumption: 1 l for approx. 50to 90 m2 formwork.
- Application only with PERIspraying appliances and wide-spread jets. Always work withhigh pressure.
6
For healthy working con-ditions on site use the PERIdrying lockerFast drying allows severalchanges of work-clothes a day.
Several lockers can be placed ina row. In this case we recommendyou also fit a commercial exhaustduct with fan.
Turning the timer to the dryingtime required (up to 6 hours)starts the fan motor.
PERI KLIMA TS 2000drying locker (Item no 065017)
Drip trayprevents evaporation
Timersetting up to 6 hours
3 temperature settingscontrol drying
Heating unitpowerful, TÜV tested
Hot air ductfor even drying
Thermally insulated doorwith vacuum seal
High build qualitygalvaniseddouble power coated
Sturdy clothes hooksFor 5 sets of clothing
Extractorremoves damp air andpasses it outside
There are three differenttemperature settings (500 W /1500 W / 2000 W).
Power supply:The locker is supplied with anapproximately 2 m long cablefor connection to a single phase220 V AC supply (10 A fuse).
Dimensions and weights:Height: 1915 mmDepth: 608 mmWidth: 595 mmWeight: about 60 kg
7
1000
280
The PERI P 80 Trestle andAccessories for Your Site
P 80 trestle
The practical way of getting at thework you cannot reach unaided.
Its 80cm height allows you toreadily reach up to 2.80 m(depending on how tall you are).
The trestle can be used by itself,or in combination with timbersand scaffold boards to form aplatform.
The nonslip aluminium plate helpsprevent you slipping, even in thewet.
At only 19kg the trestle is lightenough to move easily by hand.
Plugs
Spacer tube
PERI tie rod accessoriesPlastic or fibre reinforcedconcrete spacer tubes withthe cones and plugs required
Various types of spacer tubes,cones and plugs (see range onpage 16) are available from PERI.
Test certificate no 211006185dated 05 02 86 from the NorthRhine Westphalia MaterialsTesting Laboratory confirms thatthe 22 fibre reinforced cementtube is waterproof.
Cones
PERI carbide concretescrapers
A useful tool for the workforce ofthe contractor specialising inconcrete construction or structuralengineering.
Used to remove concrete ribs fromslabs, walls and precast units. Alsofor cleaning shutterboard andshuttering timbers quickly yetgently.
The cushioned ash handle withspade grip allows you to workwithout getting tired.
The carbide concrete scraper isavailable in three widths (54, 102and 170 mm). See range on page17 for spare butt straps.
The plastic spacer with a roughfinish is approved even for firewalls whose cone holes are madegood with mortar.
8
Handling constructionequipment is very expensive.Loading and unloading,moving and temporary storageon site or in the yard canexpose the workforce tovarious dangers.
Using the latest containers andpallets rather than making do asusual cuts costs while enhancingsafety.
For your safety on site and inthe yard:– Orderly storage of equipment– Compact stacking– Easy access– Safer shifting with fork-lift
truck and/or crane
PERI Pallets and ContainersCost-effective and safe
Wire crate with fold down side sectionand lid available as accessories.
PERI 80x120 wire crate with paint orgalvanised finish for shiftingcomponents that are difficult to stack(capacity about 0.75m2).Eg 150 TRIO BFD alignment couplers.
PR 80x120 pallet filled withtwenty-five MULTIPROPs.
IMPORTANT SAFETYPRECAUTIONS!All 4 chains of the lifting gear mustbe used when moving the palletswith the crane. The quantitiesbeing lifted in the photographs areonly examples. The pallets andcrates may obviously be stackedor filled with amounts of otherequipment not exceeding theindividual safe working loads.
80x120 small components crate withgalvanised or paint finish for tie-rods.
9
Pro
du
ktb
erei
ch 1
6.10
BetriebsanleitungAusgabe 05/98
Paletten undStapelrungenPaletten undStapelrungen
BetriebsanleitungAusgabe 08/96
RP 80x150 post pallets stackedwith standard TRIO systemcomponents, eg twenty TRG 80s.
The pallet lifter from PERI formoving on site
With a fork more than 1.50 m longthe lifter can even be used with thepallets stacked lengthwise to getpast obstacles or through dooropenings more easily.
PERI palletsconform to all relevant EUDirectives (CE mark) and cantherefore be used throughoutEurope.
All PERI pallets can be moved witha fork-lift truck and come in sizes tosuit lorry loading dimensions, eg
the 80x120 or 80x150 post palletfor transporting 25 MULTIPROPs.
The appropriate container for thetask must be chosen to preventmistakes that lead to accidents.
The Instructions for Usedetail use of the equipment asintended, and includetransportation, handling, testingand maintenance instructions.
The pallet lifter being used tomake striking of SKYDECKslab formwork easier.
655
4645
8
716
40
245
110
55
1204
138
40
90
150
6x80
=480
90
40
310
ø 20
300
106
50
96
Edge Formwork Systems, Site Equipment
Formwork Bracket-2 9,93 065062To form small slab projectionsand vertical slab stopends.Complete with:Captive Wingnut.
Accessories:Handrail Post HSGP 3,54 034580
Slab Stopend Bar 105 6,58 065063To form vertical slab stopends.Complete with:Captive wingnut and spindle.
Accessories:Handrail Post HSGP 3,54 034580
Anchor Tie Rod B1 L = 0.30m 0,42 030150Weldable!
Anchor Tie Rod DW15 Spec. Length 1,55/m 030740 Cutting Cost Tie Rod DW15 / B15 030050Permissible load: 85kN
Wingnut Counterplate DW15, galv. 0,80 030110
Permissible Load to DIN 18216: 90kN
10
Weight kg Item no.
min 15
max 488
SW
27
52
ø 4
2
74
ø 2
4
65
120
560
35
1050
1300
39
85
600
140
200
66
ø 35
ø 5
ø 35
ø 30
45
455
25
25
11
Stopend Sleeve DW15 0,075 065039Complete with:Fixing lug for Stopend Sleeve.
Accessories:Plug for Stopend Sleeve DW15 0,001 065060For sealing holes of Stopend Sleeve DW15.Supplied in packs of 250pcs.
Handrail Post HSGP 3,54 034580Safety handrail for Formwork Bracket-2and Slab Stopend Bar 105.
Stopend Trestle, adjustable 6,87 065040To form ground slabs up to 600mm deep.
Accessories:Peg (3pcs.) 1,12 065042
Peg 1,12 065042To fix the Stopend Trestleto the ground.
Weight kg Item no.
min 450
max 650
timber 60x80mm
SW 32
300
758
8080
8020 30
ø 5
400
958
8080
8020 30
ø 5
80
500
1200
20
140
42
ø 2580
140
140
ø 6
280
100
800 1252
765
1000
Wall Clamp 55 5,24 065045When used at the max. pour height of300mm a max. spacing of 1.2m is recom-mended for foundations.
Wall Clamp 75 6,44 065076When used at the max. pour height of400mm a max. spacing of 1.0m is recom-mended for foundations.
Wall Clamp 105 13,60 065046When used at the max. pour height of500mm a max. spacing of 0.8m is recom-mended for foundations.
Trestle P 80 20,70 065051To be used as a single Trestle or incombination to form a large area scaffold.
12
Weight kg Item no.
max 550
max 750
max 1050
61019
15595
14
2500
14
13
Drying Locker Klima TS 2000 61,00 065017For drying wet clothes on site.Three different drying temperatures.
Capacity: approx. 4kg clothesPower: 1600 WattConnection: 220 VoltFuse: 10 Ampere
HM Concrete ScraperWith a ash wood handle, HM TurnoverBoard, and Butt Strap made of tool steel.
HM Concrete Scraper L = 850, b = 102 1,20 065019HM Concrete Scraper L = 1300, b = 54 1,40 065018HM Concrete Scraper L = 1300, b = 102 1,80 065020HM Concrete Scraper L = 1300, b = 170 2,20 065021
Spare parts for HM Concrete Scraper:Butt Strap 54/30mm 0,035 065022Butt Strap 102/30mm 0,070 065023Butt Strap 170/30mm 0,120 065024HM Turnover Board 16/16mm 0,018 065025Wood Handle ash tree L = 1300mm 1,03 065026
Anchor Chain 3.0kN L = 2.5m 1,37 065073Galvanized.
Permissible Tension Load: 3kN.
Turnbuckle 3.0kN, M12 0,45 065074Galvanized.
Permissible Tension Load: 3kN.
Weight kg Item no.
L
b
min. 220
max. 300
1550
250
2310
12012
019
0
1630
640
580
760
120
60 60
1720
1970
790
150
146
120
Pallet SD 150x225, galv. 83,60 061530For 48 SKYDECK Panels 150x75.
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 750kg
Pallet SD 150x75, galv. 77,80 061500For 14 SKYDECK Panels 150x75.
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 1000kg
TRIO Stacking Device, galv. 7,06 023390For handling 2 to 5 TRIO panels.Follow Instructions for Use!
Lifting device toVBG 9aPerm. load: 750kg
14
2nd to 5th panel withformlining facing up
1st panel withformlining facing down
Weight kg Item no.
Stacking height
Important safety note!When stacking light, large surface items outdoorsthe maximum stacking height must be reduced.
!
1440
1070
1240
820
120
580
1110
910
1580
1070
1440
820
120
580
1110
9101240
24802280
1350
1100900
400
140
970
70
40
1150
146
150
100
15
Pallet HS 120x90, galv. 65,00 065080Pallet HS 150x90, galv. 66,60 065081For HANDSET Panels.
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 750kg
Pallet ST 100/2, galv. 124,00 065050For Stacking Tower ST 100.
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 1000kg
DOMINO Stacking Device, galv. 8,44 066094For stacking and lifting 2 to 8 DOMINOpanels.
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 250kg
Weight kg Item no.
2nd to 8th panel withformlining facing up
1st panel withformlining facingdown
Important safety note!When stacking light, large surface items outdoorsthe maximum stacking height must be reduced.
!
1280/(1580)
1080/(1380)
1200/(1500)
880
680
800
850 60
01320
565
100
410
951145
1150
975
155
Pallet RP-2 80x120, galv. 34,40 103434Pallet RP-2 80x150, galv. 41,40 103429
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 1500kg
Palette RP 110x125, lackiert 22,50 106939
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 750kg
Pallet Lifting Trolley 1500mm 110,00 061510Length of Forks: 1550mmSupport Width of Forks: 520mmLifting Range: 85 to 195mmSafe Working Load: 2000kg
16
Weight kg Item no.
Important safety note!When stacking light, large surface items outdoorsthe maximum stacking height must be reduced.
!
588
835
970
760
1240
1100
802
745
1155
37
20
590
835
500
760
1240
100
100
17
Mesh Pallet, 80x120, galv. 65,80 025660Mesh Pallet, 80x120, painted 65,80 025670Capacity: about 0.28m3
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 1500kg
Crate Pallet 80x120, galv. 85,10 065068Crate Pallet 80x120, painted 85,00 065016Volume approx. 0.75m3.
Lifting device toFollow Instructions VBG 9afor Use! Perm. load: 1500kg
Lid for Mesh Pallet 80x120 9,48 065067
Weight kg Item no.
Important safety note!When stacking light, large surface items outdoorsthe maximum stacking height must be reduced.
!
!
832
832
590
1405
1348
590
1085
1028
18
Pallets USP, galv. USP 72 60,9 100660USP 104 66,1 100678
Complete with:Lashing strap and 6 post extensions.For stacking:36 T-frames UVT and tube UV 165,or base frames UVF and L-frames UVL.Maximum stacking height: 3 high with extension 6 high without extension
Spare parts:Lashing strap, 25 x 5750 0,50 100707Scaffold tube, 1.0 m 3,6 026411
Weight kg Item no.
Safety advise!If the material to be stacked outdoors is light weightand bulky please reduce the number of stacked pallets.
19
PERI Bio CleanRelease Agent for all types of formwork.- Rapidly biologically degradeable.- Based on mineral oils.- Class 1 on German water pollutant scale. (WGK 1)
Release Agent Bio Clean 20L 0,91/L 031440 Release Agent Bio Clean 205L 0,91/L 031450
For further information see product information Bio Clean.
Consumption:1 litre covers 50 to 90m2 of formwork(depending on formwork surface)
PERI CleanRelease Agent for all types of formwork.Based on mineral oils.Cleans and protects.Can be used down to -15C degree.Class 1 on German water pollutant scale.
Release Agent PERI Clean 20L 0,92/L 031420Release Agent PERI Clean 205L 0,92/L 031430
For further information see product information PERI Clean.
Consumption:1 litre covers 50 to 90m2 of formwork(depending on formwork surface)
Pressure Sprayer 4,44 031520For spraying formwork surfaces evenlywith PERI BIO Clean or PERI Clean.Capacity: 5 litre
Spare Part:Spray Nozzle (0,1F 110) 0,064 031530
Weight kg Item no.
PERI BIO Clean, PERI Clean
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
PERI S.A.S.Zone Industrielle Nord34-36 rue des Frères Lumière77109 Meaux CedexTel.: ++33 /1/ 64 35 24 40Fax: ++33 /1/ 64 35 24 [email protected]
PERI AGAspstraße 178472 OhringenTel.: ++41 /52/ 3 20 03 03Fax: ++41 /52/ 3 35 37 [email protected]
PERI S.A.Camino Malatones - km 0,528110 Algete / MadridTel.: ++34 /91/ 6 20 48 00Fax: ++34 /91/ 6 20 48 [email protected]
N.V. PERI S.A.IndustrieparkNijverheidsstraat 6 PB 541840 LonderzeelTel.: ++32 /52/ 31 99 31Fax: ++32 /52/ 30 08 30
PERI B.V.v. Leeuwenhoekweg 23Postbus 3045480 AH-SchijndelTel.: ++31 /73/ 5 47 91 00Fax: ++31 /73/ 5 49 36 [email protected]
PERI Formwork Systems, Inc.Suite 2007272 Park Circle DriveHanover, MD 21076Tel.: ++1 /4 10/ 7 12-72 25Fax: ++1 /4 10/ 7 12-70 80www.peri-usa.com
PT Beton Perkasa WijaksanaP.O. Box 3737Jakarta 10210Tel.: ++62 /21/ 5 71 26 44Fax: ++62 /21/ 5 73 85 [email protected]
PERI S.p.A.Via G. Pascoli, 420060 Basiano (MI)Tel.: ++39 /02/ 9 50 78-1>Fax: ++39 /02/ 95 76 19 [email protected]
Hory Corporation11-17 Fuyuki, Kohtoh-KuIshima Bldg., 9FTokyo 135-0041Tel.: ++81 /3/ 38 20 88 71Fax: ++81 /3/ 56 21 70 [email protected]
PERI Ltd.Market Harborough RoadClifton upon DunsmoreRugby, CV23 0ANTel.: ++44 /17 88/ 86 16 00Fax: ++44 /17 88/ 86 16 10www.peri.ltd.uk
PERI Kalıp ve √skeleleriSan. Tic. Ltd. Sti.Çakmaklı Köyü Kars¸ısıSanbir Bl. 4.Bölge 9.Cadde No: 133Büyükc¸ekmece / IstanbulTel.: ++90 /2 12/ 8 86 74 01(02)-(09)Fax: ++90 /2 12/ 8 86 74 15www.peri.com.tr
PERI Kft.Zádor u. 4.1181 BudapestTel.: ++36 /1/ 2-960 920Fax: ++36 /1/ 2-960 [email protected]
PERI-HORY MALAYSIAFormwork SDN. BHD.Unit19-07-4, Level 7Damansara HeightsPlaza Kelanamas,19 Jalan Dungun50490 Kuala LumpurTel.: ++60 /3/ 20 93 68 23Fax: ++60 /3/ 20 92 58 [email protected]
PERI-HORY ASIAFormwork Pte. Ltd.No. 1 Sims Lane # 06-10Singapore 387355Tel.: ++65 / 67 44 29 89Fax: ++65 / 67 44 36 [email protected]
PERI Ges.mbHIndustriegelände 152Postfach 13131 GetzersdorfTel.: ++43 /27 83/ 41 19Fax: ++43 /27 83/ 41 [email protected]
PERI spol. s r.o.P.O. Box 3252 42 Jesenice / PrahyTel.: ++420 /2/ 41 09 03 11Fax: ++420 /2/ 41 09 03 [email protected]
PERI DANMARK A/SGreve Main 262670 GreveTel.: ++45 /43/ 45 36 27Fax: ++45 /43/ 45 36 [email protected]
PERI Suomi Ltd. OyPeriäistentie 6105200 RajamäkiTel.: ++358 /9/ 27 66 06-0Fax: ++358 /9/ 27 66 [email protected]
PERI NORGE ASIndustriegata 113400 LierTel.: ++47 /32/ 24 17 00Fax: ++47 /32/ 24 17 [email protected]
PERI Polska Sp. z o.o.ul. Stołeczna 6205-860 PłochocinTel.: ++48 /22/ 72 17 400Fax: ++48 /22/ 72 17 [email protected]
PERIform SVERIGE ABMontörgatan 4-6Box 907330013 HalmstadTel.: ++46 /35/ 17 46 60Fax: ++46 /35/ 17 46 [email protected]
PERI (Korea) Ltd.9thFl., Yoosung Bldg.830-67 Yeoksam-dong,Kangnam-ku,Seoul 135-080Tel.: ++82 /2/ 5 50 22 00Fax: ++82 /2/ 5 57 53 [email protected]
PERIcofragens Lda.Largo da Lagoa, 14-A2795 Linda-a-VelhaTel.: ++351 /21/ 4 14 62 30Fax: ++351 /21/ 4 14 32 75
PERI S.ARuta Nacional No. 9, km 47,5(Panamericana Ramal Escobar)(1625) Escobar / Prov. Bs. As.Tel.: ++54 /34 88/ 42 81 00Fax: ++54 /34 88/ 42 30 [email protected]
20
5
11
1
2
9
4
21
12
18
20
24
163
45
17
13
31
6
2930
34
33
35
39
43
47
42
22 19
11
5
49
PERI GmbHRudolf-Diesel-Strasse89264 WeissenhornPhone 07309/950-0Telefax 07309/[email protected]
France
Switzerland
Spain
Belgium/Luxemburg
Netherlands
USA
Indonesia
Italy
Japan
United Kingdom/Irland
Turkey
Hungary
Malaysia
Singapore
Austria
Czech Republic
Denmark
Finland
Norway
Poland
Sweden
Korea
Portugal
Argentina
PERI International
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Goran Opaliã s. p.technologije in storitveObrežna 1372000 MariborTel.: ++386 /2/ 4 21 52 40Fax: ++386 /2/ 4 21 52 41
PERI spol. s r.o.Pribylinská 10831 04 BratislavaTel.: ++421 /2/ 4 92 09-1 11Fax: ++421 /2/ 4 92 09-1 [email protected]
PERI Australia Pty. Ltd.116 Glendenning RoadGlendenning NSW 2761Tel.: ++61 /2/ 88 05 23 00Fax: ++61 /2/ 96 75 72 77www.periaus.com.au
PERI ASKalmistu tee 2211216 TallinnTel.: ++372 /6/ 77 11 00Fax: ++372 /6/ 77 11 22
PERI Hellas Ltd.Leof. Messogion 317& Lokridos152 31 Chalandri / AthenTel.: ++30 /210/ 6 72 91 21Fax: ++30 /210/ 6 72 91 [email protected]
PERI Formas eEscoramentos Ltda.Passagem Abaré, 1.50206300-000 CarapicuíbaSão PauloTel.: ++55 /11/ 41 86 10 41Fax: ++55 /11/ 41 86 10 [email protected]
PERI Chile Ltda.C /José de San Martin 104Parque Industrial Los LibertadoresColina, Santiago de ChileTel.: ++56 /2/ 4 44 60 00Fax: ++56 /2/ 4 44 60 [email protected]
PERI GmbH4-B Sycamore Center,Alabang-Zapote RoadCorner Buencamino Street,Alabang MuntinlupaMetro ManilaTel.: ++63 /2/ 8 09 34-01 (02) (03)Fax: ++63 /2/ 8 09 17 [email protected]
PERI România SRLDN1 km 20 + 150Bucuresti - Ploiesti8113 Balotesti - ILFOVTel.: ++40 /21/ 2 66 24 19Fax: ++40 /21/ 2 66 24 20
Merkur HFBaejarflöt 4112 ReykjavikTel.: ++354 / 5 94 60 00Fax: ++354 / 5 94 60 02
PERI Kalip ve IskeleleriAlmaty Branch OfficeFurmanova Straße, 65Büro 412 Corner Makataeva480004, Alma AtaTel.: ++7 /32 72/ 33 00 72Fax: ++7 /32 72/ 33 91 [email protected]
PERI GmbHKrasnopresnenskajaNaberezhnaja 12Hotel Mezhdunarodnaja 2Nr. 1312123610 MoskauTel.: ++7 / 0 95/ 2 58 23 49Fax: ++7/ 0 95/ 2 58 23 [email protected]
PERI Wiehahn (Pty.) Ltd.P.O. Box 2668Bellville 7535Tel.: ++27 /21/ 9 05 18 15Fax: ++27 /21/ 9 05 47 [email protected]
TOW PERI Ukraina23, M. Raskowoj Str.02002 KiewTel.: ++380 /44/ 5 68 53 57Fax: ++380 /44/ 5 68 51 45
PERI GmbHEgypt Branch Office24 A, Obour Gardens,4th floor, apt. #1Salah Salem Street11361 Heliopolis / KairoTel.: ++20 /2/ 4 04 85 24/26Fax: ++20 /2/ 4 04 57 [email protected]
Predstavnistvo BeogradBezanijskih ilegalaca 7011070 N. BeogradTel.: ++ 3 81 / 11 / 3 18 25 07Fax: ++ 3 81 / 11 / 3 18 59 [email protected]
PERI Cimbras y Andamios,S.A. de C.V.Cerrada de Tejocotes, Lote 4,Bodega ASan Martin ObispoC.P.54769 Cuautitlán IzcalliEstado de México
VIA TEH Ltd.Kürzes iela 3A1046 RigaTel.: ++371 / 7 61 60 32Fax: ++371 / 7 61 40 44www.peri.lv
PERI (L.L.C.)Brashy Building, Office No. 212Shk. Zayed RoadP.O. Box 27933DubaiTel.: ++971 /4/ 3 39 44 94Fax: ++971 /4/ 3 39 44 [email protected]
PERI Formwork Systems, Inc.45 Nixon RoadBolton, OntarioL7E 1K1Tel.: ++1 /9 05/ 9 51 54 00Fax: ++1 /9 05/ 9 51 54 54www.peri.ca
PERI GmbHLebanon Representative OfficeAYA Center, 7th floorP.O. Box 90416Antelias / BeirutTel.: ++961 /1/ 24 33 65Fax: ++961 /1/ 24 33 [email protected]
PERI UABTitnago st. 192053 VilniusTel.: ++370 /5/ 2 31 14 54Fax: ++370 /5/ 2 32 19 [email protected]
PERI S.A.Route de Rabat, km. 5Piste de Beni TouzineTangerTel.: ++212 /39 31 75 48Fax: ++212 /39 31 75 49
PERI FormworkEngineering Ltd.16 Moshe Dayan st.P.O. Box 10202Kiriat AriePetach Tikva 49002Tel.: ++972 /3/ 9 24 93 32Fax: ++972 /3/ 9 24 93 [email protected]
PERI BULGARIA EOOD9-11 Gebedje Str.1612 Sofia / BulgariaTel.: ++3 59 /2/ 9 15 19 55Fax: ++3 59 /2/ 9 15 19 [email protected]
21
36
45
3841
7
26
2527
14
15
23
8
10
28
32
48
37
40
46
44
50
Slovenia
Slovakia
Australia
Estonia
Greece
Brazil
Chile
Philippines
Romania
Iceland
Kazakhstan
Russian Federation
South Africa
Ukraine
Egypt
Serbia/Montenegro
Mexico
Latvia
United Arab Emirates
Canada
Lebanon
Lithuania
Morocco
Israel
Bulgaria
D
pr
16.1
0 e
05/2
003
5ma
Art
.Nr.
: 790
564
Scaffolding
UP T 70 / T 100Frame scaffolding
UP RosettModular scaffolding
UP RosettShoring
Further Systems
ELPOS, Software forformwork planning
PlywoodSite equipmentBrace framesFormwork accessoriesCustom forms
The PERI Delivery Program
Climbing Formwork
KG and CBClimbing systems
ACSSelf climbing formwork
SKS and SSCSingle sided climbingformwork
Shoring SystemsST 100Stacking tower
HD 200Heavy duty prop
PERI MULTIPROPThe Alu prop
PERI PEP PropPEP = PERI EURO-PROP
Girder Wall Formwork
VARIO GT 24Wall, column formwork
RUNDFLEX and GRVCircular formwork
FTFFacade formwork
Panel FormworkTRIO, TRIO-L, TRIO 330Versatile panel systemHOUSINGREPLIABLEDOMINOLight weight panel systemHANDSETThe "one man" panel system
Alu-Slab Formwork
PERI SKYDECKAlu slab formwork system
Platform Systems
Folding Platform FB 180Universal working andprotective scaffold toDIN 4420
ASG 160The light platform systemfor building trades
Girder Slab Formwork
MULTIFLEXGirder slab formwork
UNIPORTAL /Table ModulesTable form
PD 81 system for 3 applications
Column FormworkRAPIDAlu column formwork
TRIOColumn formwork
QUATTROThe fast column formwork
PERI SRSCircular column formwork
PERI GmbHP.O. Box 12 6489259 WeissenhornTel.: 0 73 09 / 9 50-0Fax: 0 73 09 / 9 51 [email protected]