REMOTE CONTROLSEARCHLIGHTFEATURES

Model 60020-Series 135 SL

s:0Q.CD-0)00N0.fACD:::!.

,~ ~ ~ ~~en

. Constructed of noncorrosive materials

. Sealed beam halogen lamp. Remote control and 15'cable included

. Long life gear drive

. Lowampdraw -.

. -f>'atentedclutchmeChanTsm=preven1Smotor-dama~-""==--when running against limit stops

APPLICATION

Ideal for boaters...locate buoys, moorings, channelmarkers, etc. Ideal for RV' ers...pinpoint road signs,campsites, or use as backup light.

SPECIFICATIONS. 3200 horizontal movement

. 750 vertical sweep

.50 watt 3-1/2 "X 6" bulb

. White thermoplastic housing and base

INSTALLATIONINSTRUCTIONSLIGHT MOUNTING

Select a location for the light which will allow for clearbeam projection forward and as far aft as possible.Searchlight base should be mounted on level, flatsurface. Using the light base mounting templateenclosed, drill three (3) mounting holes and a centerhole at the center of base for wiring cable. Feed cablethrough holeand fastenlight in placewith three(3)#10 x 1"

. -=-- sCfew.§pro~ided,or~!i9ab!§screws foryourpqrtiQular. .. ~ . =-:.=.-~~ ~ ".,=application. Mount light so that the Jabsco name on tilebase is facing to the rear.

NOTE: SECURE CABLE WITH NYLON CLIPS OREQUIVALENT. PROTECT INSTALLATION AT POINTSOF STRESS,AND LEAVEADEQUATE SLACK WHERECABLE MUST BE FLEXIBLE.

ModelNumber Voltage

12 Vdc24 Vdc

Amps

3.62

60020-000060020-0024

Remote Control Unit

CONTROL INSTALLATION(60030-0000)Select a locationnear the helm which will allow forconvenient operation of control.

1. Cut two holes (see Panel Cutout Template enclosed)for mounting control.

--2,..~Gute power~leae-s=(stli'lplied.by customer)- from~",,-'--voltage source to control. Note: Wiring must be 16gauge (minimum).

3. Connect positive (+) power lead to red (+) wire andnegative (-) power lead to black wire using buttconnectors.

4. Connect wires (matching colors) from control panelto end of light cable using butt connectors provided.

5. Use bedding compound or sealant to waterproofcontrol mounting.

6. Secure control with self-tapping screws provided.

Candlepower

100,000100,000

WeightsIb (kg)

6 (2.7)6 (2.7)

StandardCarton

44

CONTROL UNIT OPERATIONSWITCH FUNCTIONS

(A) Light Switch - On/Off switch positions.

(B) Directional Switch - Lever has eight contactpositions and will operate in horizontal, vertical, andin four intermediate directions.

o~ ~ 0

(A) (8)

CLEANING OF EXTERIORPLASTIC$URF~C_ESRecommendationfor cleaning "Exterior Surfaces" is asolution of warm water and a mild "dish washing"detergent soap.

CAUTION Do not use cleaners that contain esters,halogenated solvents, aromatic solvents, ketones andstrong acids or bases.

CIRCUIT PROTECTION

A 10amp fuse is located in the On/Off toggle on control.To replace fuse grasp On/Off toggle and push in whileturning to left facing control. Pull out fuse and replace.The proper fuse has been included in the fuse holder.Should this fuse blow, replace with the same size fuseafter determining reason for blown fuse.

NOTE: ON SOME MODELSTHE FUSE HOLDER MAYBE LOCATEDSEPARATELY.

d1b

When installation and wiring is completed, check lightoperation. If light is inoperative, or does not operatecorrectly, refer to troubleshooting instruction.

SERVICE

CONTROL REPLACEMENT

Individual replacement parts are available for the controlpanel. To replace switches remove the two (2) screwsfrom front of panel and pull forward, exposing wiring.

1. To remove directional switch push firmly on the fronttoggle and remove switch from back side of panel.Cut wires to the defective switch, and splice wires(with butt connectors) to the new switch, being sure

to match wire colors. Note: install switch with yellowwire on top for correct directional aiming.

2. To remove On/Off fuse switch disconnect wires todefective switch and pull forward will gentle rockingmotion from back side of panel easing switch out.Install new switch and secure using clip retainer onback side of control panel. Reconnect wiringterminals to switch.

BULB REPLACEMENT

Remove four (4) screws and retaining bezel. Pull bulbassembly forward and disconnect spade connectors fromback of bulb. Reconnect spade terminals to new bulb.Install bulb and fasten with bezel and four (4)screws.

PARTS LIST

Description

Bulb KitDirectional SwitchOn/Off FuseSwitchStation Selector SwitchControl12/24Volt ConverterUpper HousingLower HousingBaseBulb RetainerMotor-Vertical(upper)Motor-Horizontal(lower)

PartNumber

18753-017843990-000018753-018064073-002060030-000045969-100060023-1 00060024-100060027-100060035-1 00018753-035018753-0350

.J~ " ~

r

r 0 ~ ~ 0

--.84---i--1.7S---

------------ ~~-- //-::---:;.: :; \

f' \;:-;;:;.;:;> i I SECONDARY CONTROL CABLE

- \\ I! MUSTBEAOUIREDSEPARATELY FLYBRIDGECONTROLi \\ 1--) (SEE CABLE LISTING) 43670-0003

\ ~) - I) ,- ~ [UP"'- j i /-;/ { ( ~ Ii: j I nb" 'I ,/ - \

~'f//- i ' Jer

'(::~-

-

tS--

-

-

-

I

_

:_

~==,~ --,! - - INPUT LEADS SUPPLIED ./

--- i -- , -- I --=:-<'-= -- -- ,..- --~~~ =-=--~STOMER (f6"GAT--I ~ J ~~

STATION SELECTOR( '--. .-/ ~/ cn", --- PANEL\ -' :_:: m ::::: :-:/ z II'-' ~ 43683-0000

'-<==It/ ~-"'-~ ~ BLACK A / ~ LP~) /

WIRING CODE ORANGE""'I", / /~I!~ // Cut off connectors- TO CABLE ~i' '" /

TO CONTROL- ~;!~}YEL ~ ~~BLU~GRN ~ GRN

!!RN_-L ~lI~

Note: Connect red and one black lead (16 gauges wire)from control to positive and negative leads from powersource- Power leads to be 16 gauge minimum-

--"--=---

--==

ACCESSORY CABLES-------..-----------

43990-0013=10FT,

43990-0014=15FT,

43990-0015=25FT.

43990-0016=35FT-

43990-0028=50FT-BULK

m____--_--------------

~ ~, _/ -::::::1 \f '¥'-;:-::.:::-- i \~--- \\ I :\ II i-,

~' I' I i j--" i /

Ii j I

>-- !L/~_#//--:;;/

"" 1::: )--r-"::::: "'.:.--~

7~~Iiiff!II

II~,

-~~~~[ l

-""==

,"~'i

I

III;

=--= .,.~ -- -'WIRlNG CQ~'---

-TO CONTROLTO CABLE-

Connect matchingcolors using buttconnectorssupplied-Orange--I I

,.JII I

Black (-) ------

Red(+} --,

~~~~---, YELORG , ORG

!!_!:~--.;:===:::~ §.I;,K.

/GRYNOT USED

" ~ -~O ' 0~ \i8jJ ~

135 SL CONTROL FRONT VIEW

DUAL STATION INSTALLATION KIT43670-0005

m m--_----__--..---«( !,--"'--m-m

BLACK H/' RED (+)/i ,,::;:::--

f~/~nil

me @ ~ ()

PRIMARYSTATION60030-0000

CONNECTORS

r'o'~61~ioco:I~~~1L2..2_0 i i COO '

FEMALE MALE

DIMENSIONAL DRAWINGInches (Millimeters)

- 7-1/2"(1g0mm)

r-- 5-3"" OIAL- (137mm)

.

TROUBLESHOOTING

. .. - 7-1/16"(180mm)

1

QSEALEd BEAM

I

Ir +-----

I30°(BULB ONLY)

'<I.

5"(127mm)

7-7/8"

j(200mm)

0 HALOOEN

5-3/8"(137mm)

j

15 FT LONG CABLE(STANDARD)

All lights arethoroughlyinspectedbeforeshippingandarewarrantedto operatewithinspecifications.If lightdoesnotoperate correctly, check fuse and wire harness connections before proceeding.Problem Solution

Control works in reverse in all diections. Control installed upside down.

Bulb operates - no light movement.

Light moves - bulb does not operate.

Check wiring code for proper wire color connections.

Dim light

1. Check bulb.2. Check wiring codefor proper wire color connections.

1. Check voltage at power source.2. Increase wire size from source to control.3. Check for proper ground circuit.

Jabsco

~ ~~~<~~~,~;triesu.S.A.Jabsco1485Dale Way,p.o. Box2158Costa Mesa, CA 92628-2158Tel: 714.545.8251Fax: 714.957.0609

UNITED KINGDOMJabsco

Bingley Road, HoddesdonHertfordsire EN11 OBU

Tel: +44 (0) 1992450145

Fax: +44(0) 1992467132

THE PRODUCTS DESCRIBED HEREIN ARESUBJECT TOTHE JABSCO ONE YEAR LIMITEDWARRANTY,WHICH IS AVAILABLE FOR YOURINSPECTION UPON REQUEST.

CANADAFluid Products Canada55 Royal RoadGuelph, Ontario N1H 1T1Tel: (519) 821.1900Fax: (519)821.2569

JAPANNHK Jabsco Company Ltd.3-21-10, Shin-YokohamaKohoku-Ku, Yokohama, 222Tel: 045.475.8906Fax: 045.475.8908

GERMANYJabsco GmbHOststrasse 2822840 NorderstedtTel: +49-40-534373- 0Fax: +49-40-535373-11

@ Copyright 2001, ITT Industries Printed in U.S.A. Rev. 3/2001All Rights Reserved Form:43000-0507

1.50DIA.

PANEL CUTOUT(CONTOL PANEL)

-~

-- -,- -,,/" ......../" ..........

,/ I ........

,/,/

//

//

IIfI\\ I\ I ~

I

\ A I /\. ~ I /\ I /, I /, /, I ,/

I ,//", I ,,/"- ,-- -

--1--

, ,\

\\\\\If

'" -='

=~~ --=-

. 1.25 ~I

2.00 IDIA.I

II

I ~ MOUNTING1/ HOLESIIIIII

~I

~I~ 1.31

- --,- ........,/ ,

'/ \/\ \I I I

/ /\ / /X ,/'-- ~ /", ,---

,/-/r

ilI \I ,IIII~

3.62

/ Lighthead

I' outline

1/2" Dia. holein deck for cable

Ughtbaseoutline

Mountingholes (3)

LIMITED WARRANTY

Able 2 Products Company warrants each new product (except bulbs, strobe power suppliesand strobe tubes)to be free from defects in material and workmanship for a period of two years fromthe date of purchase. During this warranty period, the obligation of Able 2 is limited to repairing orreplacing, as Able 2 may elect, any part or parts, which after examination by Able 2 are determinedto be defective, when they are delivered pre-paid.This limited warranty does not cover travelexpense, the cost of specialized equipment for gaining access to the product, or labor charges forthe removal and re-installation of the product.

Able 2 Products Company shall not be liable for incidental or consequential damages,including but not limited to: Loss of use of vehicle, Rental of substitute vehicle, Loss of time, Loss ofwork, Inconvenience, Transportation expenses, Telephone, Lodging, Loss of revenue, Loss of and/ordamage to personal property for or arising out of breach of any express or implied warranty of its

prod~cts.

Use of lamp or other electrical load of a wattage higher thaninstalled or recommended bythe factory, or use of inappropriate or inadequate wiring or circuit protection causes this limitedwarranty to become void. Able 2 Products Company will in no way be liable for any loss of profits orany indirect or consequential damages arising out of any such defect in material and workmanshipwhether loss is due to negligence or breach of warranty. This limited warranty does not apply toshipping damage, accident, alteration, tampering, misuse or abuse and unauthorized service.

This limited warranty is expressly in lieu of all other express or implied warranties, includingthe implied warranty of merchantability and the implied warranty of fitness for a particular purpose,and of all other obligations or liabilities on the part ofAble 2 Products Company. There are nowarranties, unless expressed in authorizedAble 2 literature, which extend beyond the description ofthe face hereof. No dealer, distributor, employee, or representative of the company is authorized tochange this warranty in any way or to grant any other warranty.

PRODUCT RETURNS

If a product must be returned, contact our factory by calling 1-800-641-4098 to obtain aReturn Authorization Number (RA) before you ship the product. Write the RA Number clearly on thepackage and return it to Able 2 Products Company, P.O. Box 543, 804 E. Hwy. 248, Cassville, MO65625-0543. A packing slip should be included with all shipments listing the sender's name, ad-dress, daytime phone number and description of defect. Your product will be put in first-classoperating condition or replaced with a new part, and returned pre-paid.

WARRANTIES: Strobe Power Supplies 5 yearsAll other products (EXCEPT Bulbs) - 2 years (Under normal use)

. Note: Strobe Tubes - 1 Year Warranty (Under normal use)Halogen and Incandescent bulbs are not covered by warranty.

PRODUCTS COMPANY. 804 East Hwy. 248 . CassvllJe, MO 65625U.S.and Canada Toll Free Numbers. Phone: 800-6414098 FAX: 800-526-1240E-mail: sales@able2products.com WEB:WWW.sbl92products.com

2/04