mantiscranes.com

FEATURES15010

77 Ton Tele-Boom Crawler Crane

Large access doors, spacious machinery compartments simplify preventative maintenance and service of the crane.

Cameras display the winch as well as the blind area directly behind the crane. Full color video display in operator cab is standard equipment.

Spacious cab, adjustable seat, and conveniently located controls are common in all Tadano Mantis Cranes.

No other craNe combiNes so maNy valuable features:

Pick-and-carry the full crane load chart through 360°. Lift and walk...even with tracks retracted. Climb steeper grades, thanks to minimized counterweight and low center of gravity.

Pull through deep mud without bogging down. Telescope or lift the boom with a full load on the hook. Save time and money on the job due to low clearance height, retract on-the-fly tracks and telescopic boom.

Independent hydrostatic track drives allow pivot turns and counter rotation

Hydraulic tool circuit option powers wide choice of Mantis-approved tools.

Tadano AML-C rated capacity indicator provides continuousfeedback of crane lift position and data

Standard operators cab tilts up for improved operator comfort. Improved design walkways allow easy access into the cab.

PoWerliNe

taDa

No m

aNti

s cor

Pora

tioN

1705

Colu

mbi

a Ave

nue •

Fran

klin

, TN

3706

4 US

A • T

oll-F

ree:

1-80

0-27

2-33

25 •

Fax:

615-

790-

6803

• m

antis

cran

es.co

m

Pile DriviNg

418-03/11

DIMENSIONSSPECIFICATIONSmaximum liftiNg caPacity77 ton at 10 feet (70t at 3.0m)

boom 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:37’6”(11.4m) •ExtendedLength:111’6”(34m) •ExtensionTime:102s •ElevatingAngles:-1°to78° •ElevatingTime:64s •BoomHead:Seven,19inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings

(5loadbearingand2leadinsheaves) •AuxiliaryBoomHead:Quickreeve,single19inch(483mm)diameterhigh-strength,castnylon

sheave mounted on a heavy-duty roller bearing. •HookBlock:80ton(72.5t)hookblock-Five19inch(483mm)diametersheavesmountedon

heavy duty roller bearings with swivel hook and safety latch. •HeadacheBall:12ton(11t)ballincludesaswivelhookwithasafetylatch.

WiNches Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included •MainWinch -RopeDiameterandLength:¾”x700ft(19mmx213m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(4thlayer) •AuxiliaryWinch -RopeDiameterandLength:¾”x350ft(19mmx107m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(atthe4thlayer)

travel Eachsideframecontainsapilotcontrolled,two-speedtrackdrivewithhydraulicaxialpistonmotorandparking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.6mph(1.0km/h) •Hightravelspeed:1.7mph(2.8km/h) •Gradeability(unladen):68%

loaD momeNt iNDicator & aNti -tWo blockTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Controlfunctionshutdown.Audibleandvisualwarnings •LCDscreenprovidesacontinuousdisplayofworkingboomlength,boomangle,workingload

radius,tipheight,parts-of-line(operatorset),machinetrackconfiguration(operatorset),relativeload moment, maximum permissible load and actual load.

•Optional3-colorlightbarforexternalindicationofloadstate.

oPerator’s cabFully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremotecontrolworklights. •2-speedwindshieldwiper,topglasswiper •Six-wayadjustablefabricseatwithheadrest,seatbelt •Four-wayelectronicarmrestmountedjoystickscontrolswing,boomextend,mainwinch,auxiliary

winchandboomhoist.Electronicfootpedalscontrolthetravelandswingservicebrakefunctions. •Selectablecontrolmodesfor:FineControl,Auger,andhandcontroloftravelfunctions. •Seatandarmrestterminationswitchesimmediatelydisableallhydraulicfunctionsastheoperator

rises from the seat or lifts the left hand armrest.Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperaturegauge,hourmeterandfuelgauge.Indicatorsareprovidedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.

eNgiNe •Make/Model:CumminsQSB6.7 •Rating:260hp(194kW)@2100RPM •Alternator:130amp

electrical system12VDC

couNterWeight Total35,000lb(15,875kg)rearcounterweight(Twopieces)

sWiNg Gearmotordrivingaplanetarygearreducerwithashaftmountedpinion,externalgearshearballslewbearing bolted to the superstructure and the carbody allows the superstructure to rotate 360° •SwingSpeed:0-2.2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulicreleasethatiscontrolledfromthe

operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthroughfootactuatedpedal •HouseLockSystem:2-position,manuallypinned

hyDraulic system •HydraulicPumps:Twohighpressure,variableaxialpistonpumpswithloadsenseandpower

limitingcontrolforcranefunctions.Onevariableaxialpistonpumpforcoolingloop •DirectionalValves:Multiplepressureandflowcompensatedvalveswithintegratedreliefvalves

controlled by hydraulic pilot signals. •Pumpoutput:154gpm(583l/min)@2100RPMenginespeed.4,800psi(330bar)maximum

pressure •Filtration:5micron.

siDe frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers:TwotopandtwelvebottomsealedrollersoneachtrackframeIdler:Oilfilled,self

lubricating with spring type tensioner •TrackShoes:36inch(900mm)3-barsemigrouser

oPtioNal equiPmeNt •BoomExtension:Latticetype,swingaway -Length:30feet(9.1m) -Head:Two,19-inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings -Max.LiftingHeight:142ft(43.3m) •BoomJib:Latticetype,swingaway,storesalongboomextension -Length:20feet(6.1m) -OffsetAngles:15°&30° -Max.LiftingHeight:162feet(49.4m) •50ton(45t)hookblock-Three18inch(457mm)steelsheaves,swivelhook&safetylatch •CarbodyJackSystem:Hydrauliccylinderjacksystemandpendantcontroltofacilitatequickremoval

oftrackframesfor9’10”(3.0m)shippingwidth. •TrackShoes:30inch(760mm)3-barsemigrouser •TrackShoes:31.5inch(800mm)flatshoe •AugerReadyPackage:Includeshoses,fastenersandstowagebracketassemblymountedtothe

basesectionoftheboomwithaflowcapabilityof34gpm(130l/min) •CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone60inch(1.52m)kelly

bartotheAugerReadyPackage. •ToolCircuit:Provides5gpm(23l/min)and10gpm(45l/min)at2,500PSI(176bar)througha50

foot(15.2m)twinhosereelwithquickdisconnectfittingstooperateopencentertools. •FreeFallHoists:Allwinchesareavailableincontrolledfreefallconfigurations. •ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactory

for application support) •WorkPlatform:ModelWP750–36inx72in(0.9mx1.8m),allsteel,welded,twoperson

platform with maximum capacity of 750 lbs (340 kg). •PoleClaw:Heavy-dutypoleclawwithhydraulicclampandtilt. •Radiocontrolpackage. •Rotationresistantwirerope. •PileDrivingLeadReadyPackage:IncludesHydraulicvalves,in-cabcontrolpendant,andquick

coupler panel.

1501077 Ton Tele-Boom Crawler Crane

WiDths, Weights, aND grouND Pressures*

Shoe Width

Overall WidthArea Ground

PressureWorking WeightRetracted Extended

30 in (762mm)

12ft0in (3.66 m)

18ft2in (5.54 m)

12,360in² (7.97m²)

11.0 psi (0.77kg/cm²)

135,730 lb (61,419kg)

36 in (900mm)

12ft6in (3.81m)

18ft8in (5.69m)

14,850in² (9.57m²)

9.3psi (0.65kg/cm²)

137,554 lb (62,241kg)

* Crane equipped with: 111 ft 6 in boom, extension, jib, 75 ton hook block and 12 ton headache ball

111 ft 6 iN maiN boom, 30 ft exteNsioN & 20 ft jib

oPtioNal equiPmeNt

auger aND Pole claW light bar aND tool circuitWork Platform

VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE,

heavy-duty machines. We match massive steel

fabrications with diesel engines and state of the art

hydraulicstoprovideaPOWERFULcranethatmeetsthe

toughest demands in full load pick-and-carry as well

as lift applications.MANTIS… the one DEPENDABLE

crane that does it all on your jobsite

mantiscranes.com

FEATURES15010

77 Ton Tele-Boom Crawler Crane

Large access doors, spacious machinery compartments simplify preventative maintenance and service of the crane.

Cameras display the winch as well as the blind area directly behind the crane. Full color video display in operator cab is standard equipment.

Spacious cab, adjustable seat, and conveniently located controls are common in all Tadano Mantis Cranes.

No other craNe combiNes so maNy valuable features:

Pick-and-carry the full crane load chart through 360°. Lift and walk...even with tracks retracted. Climb steeper grades, thanks to minimized counterweight

and low center of gravity. Pull through deep mud without bogging down. Telescope or lift the boom with a full load on the hook. Save time and money on the job due to low clearance height, retract

on-the-fly tracks and telescopic boom. Independent hydrostatic track drives allow pivot turns

and counter rotation Hydraulic tool circuit option powers wide choice of Mantis-approved tools.

Tadano AML-C rated capacity indicator provides continuousfeedback of crane lift position and data

Standard operators cab tilts up for improved operator comfort. Improved design walkways allow easy access into the cab.

PoWerliNe

taDa

No m

aNti

s cor

Pora

tioN

1705

Colu

mbi

a Ave

nue •

Fran

klin

, TN

3706

4 US

A • T

oll-F

ree:

1-80

0-27

2-33

25 •

Fax:

615-

790-

6803

• m

antis

cran

es.co

m

Pile DriviNg

418-03/11

DIMENSIONSSPECIFICATIONSmaximum liftiNg caPacity77 ton at 10 feet (70t at 3.0m)

boom 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:37’6”(11.4m) •ExtendedLength:111’6”(34m) •ExtensionTime:102s •ElevatingAngles:-1°to78° •ElevatingTime:64s •BoomHead:Seven,19inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings

(5loadbearingand2leadinsheaves) •AuxiliaryBoomHead:Quickreeve,single19inch(483mm)diameterhigh-strength,castnylon

sheave mounted on a heavy-duty roller bearing. •HookBlock:80ton(72.5t)hookblock-Five19inch(483mm)diametersheavesmountedon

heavy duty roller bearings with swivel hook and safety latch. •HeadacheBall:12ton(11t)ballincludesaswivelhookwithasafetylatch.

WiNches Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included •MainWinch -RopeDiameterandLength:¾”x700ft(19mmx213m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(4thlayer) •AuxiliaryWinch -RopeDiameterandLength:¾”x350ft(19mmx107m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(atthe4thlayer)

travel Eachsideframecontainsapilotcontrolled,two-speedtrackdrivewithhydraulicaxialpistonmotorandparking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.6mph(1.0km/h) •Hightravelspeed:1.7mph(2.8km/h) •Gradeability(unladen):68%

loaD momeNt iNDicator & aNti -tWo blockTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Controlfunctionshutdown.Audibleandvisualwarnings •LCDscreenprovidesacontinuousdisplayofworkingboomlength,boomangle,workingload

radius,tipheight,parts-of-line(operatorset),machinetrackconfiguration(operatorset),relativeload moment, maximum permissible load and actual load.

•Optional3-colorlightbarforexternalindicationofloadstate.

oPerator’s cabFully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremotecontrolworklights. •2-speedwindshieldwiper,topglasswiper •Six-wayadjustablefabricseatwithheadrest,seatbelt •Four-wayelectronicarmrestmountedjoystickscontrolswing,boomextend,mainwinch,auxiliary

winchandboomhoist.Electronicfootpedalscontrolthetravelandswingservicebrakefunctions. •Selectablecontrolmodesfor:FineControl,Auger,andhandcontroloftravelfunctions. •Seatandarmrestterminationswitchesimmediatelydisableallhydraulicfunctionsastheoperator

rises from the seat or lifts the left hand armrest.Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperaturegauge,hourmeterandfuelgauge.Indicatorsareprovidedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.

eNgiNe •Make/Model:CumminsQSB6.7 •Rating:260hp(194kW)@2100RPM •Alternator:130amp

electrical system12VDC

couNterWeight Total35,000lb(15,875kg)rearcounterweight(Twopieces)

sWiNg Gearmotordrivingaplanetarygearreducerwithashaftmountedpinion,externalgearshearballslewbearing bolted to the superstructure and the carbody allows the superstructure to rotate 360° •SwingSpeed:0-2.2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulicreleasethatiscontrolledfromthe

operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthroughfootactuatedpedal •HouseLockSystem:2-position,manuallypinned

hyDraulic system •HydraulicPumps:Twohighpressure,variableaxialpistonpumpswithloadsenseandpower

limitingcontrolforcranefunctions.Onevariableaxialpistonpumpforcoolingloop •DirectionalValves:Multiplepressureandflowcompensatedvalveswithintegratedreliefvalves

controlled by hydraulic pilot signals. •Pumpoutput:154gpm(583l/min)@2100RPMenginespeed.4,800psi(330bar)maximum

pressure •Filtration:5micron.

siDe frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers:TwotopandtwelvebottomsealedrollersoneachtrackframeIdler:Oilfilled,self

lubricating with spring type tensioner •TrackShoes:36inch(900mm)3-barsemigrouser

oPtioNal equiPmeNt •BoomExtension:Latticetype,swingaway -Length:30feet(9.1m) -Head:Two,19-inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings -Max.LiftingHeight:142ft(43.3m) •BoomJib:Latticetype,swingaway,storesalongboomextension -Length:20feet(6.1m) -OffsetAngles:15°&30° -Max.LiftingHeight:162feet(49.4m) •50ton(45t)hookblock-Three18inch(457mm)steelsheaves,swivelhook&safetylatch •CarbodyJackSystem:Hydrauliccylinderjacksystemandpendantcontroltofacilitatequickremoval

oftrackframesfor9’10”(3.0m)shippingwidth. •TrackShoes:30inch(760mm)3-barsemigrouser •TrackShoes:31.5inch(800mm)flatshoe •AugerReadyPackage:Includeshoses,fastenersandstowagebracketassemblymountedtothe

basesectionoftheboomwithaflowcapabilityof34gpm(130l/min) •CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone60inch(1.52m)kelly

bartotheAugerReadyPackage. •ToolCircuit:Provides5gpm(23l/min)and10gpm(45l/min)at2,500PSI(176bar)througha50

foot(15.2m)twinhosereelwithquickdisconnectfittingstooperateopencentertools. •FreeFallHoists:Allwinchesareavailableincontrolledfreefallconfigurations. •ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactory

for application support) •WorkPlatform:ModelWP750–36inx72in(0.9mx1.8m),allsteel,welded,twoperson

platform with maximum capacity of 750 lbs (340 kg). •PoleClaw:Heavy-dutypoleclawwithhydraulicclampandtilt. •Radiocontrolpackage. •Rotationresistantwirerope. •PileDrivingLeadReadyPackage:IncludesHydraulicvalves,in-cabcontrolpendant,andquick

coupler panel.

1501077 Ton Tele-Boom Crawler Crane

WiDths, Weights, aND grouND Pressures*

Shoe Width

Overall WidthArea Ground

PressureWorking WeightRetracted Extended

30 in (762mm)

12ft0in (3.66 m)

18ft2in (5.54 m)

12,360in² (7.97m²)

11.0 psi (0.77kg/cm²)

135,730 lb (61,419kg)

36 in (900mm)

12ft6in (3.81m)

18ft8in (5.69m)

14,850in² (9.57m²)

9.3psi (0.65kg/cm²)

137,554 lb (62,241kg)

* Crane equipped with: 111 ft 6 in boom, extension, jib, 75 ton hook block and 12 ton headache ball

111 ft 6 iN maiN boom, 30 ft exteNsioN & 20 ft jib

oPtioNal equiPmeNt

auger aND Pole claW light bar aND tool circuitWork Platform

VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE,

heavy-duty machines. We match massive steel

fabrications with diesel engines and state of the art

hydraulicstoprovideaPOWERFULcranethatmeetsthe

toughest demands in full load pick-and-carry as well

as lift applications.MANTIS… the one DEPENDABLE

crane that does it all on your jobsite

DIMENSIONSSPECIFICATIONSmaximum liftiNg caPacity77 ton at 10 feet (70t at 3.0m)

boom 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:37’6”(11.4m) •ExtendedLength:111’6”(34m) •ExtensionTime:102s •ElevatingAngles:-1°to78° •ElevatingTime:64s •BoomHead:Seven,19inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings

(5loadbearingand2leadinsheaves) •AuxiliaryBoomHead:Quickreeve,single19inch(483mm)diameterhigh-strength,castnylon

sheave mounted on a heavy-duty roller bearing. •HookBlock:80ton(72.5t)hookblock-Five19inch(483mm)diametersheavesmountedon

heavy duty roller bearings with swivel hook and safety latch. •HeadacheBall:12ton(11t)ballincludesaswivelhookwithasafetylatch.

WiNches Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included •MainWinch -RopeDiameterandLength:¾”x700ft(19mmx213m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(4thlayer) •AuxiliaryWinch -RopeDiameterandLength:¾”x350ft(19mmx107m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(atthe4thlayer)

travel Eachsideframecontainsapilotcontrolled,two-speedtrackdrivewithhydraulicaxialpistonmotorandparking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.6mph(1.0km/h) •Hightravelspeed:1.7mph(2.8km/h) •Gradeability(unladen):68%

loaD momeNt iNDicator & aNti -tWo blockTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Controlfunctionshutdown.Audibleandvisualwarnings •LCDscreenprovidesacontinuousdisplayofworkingboomlength,boomangle,workingload

radius,tipheight,parts-of-line(operatorset),machinetrackconfiguration(operatorset),relativeload moment, maximum permissible load and actual load.

•Optional3-colorlightbarforexternalindicationofloadstate.

oPerator’s cabFully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremotecontrolworklights. •2-speedwindshieldwiper,topglasswiper •Six-wayadjustablefabricseatwithheadrest,seatbelt •Four-wayelectronicarmrestmountedjoystickscontrolswing,boomextend,mainwinch,auxiliary

winchandboomhoist.Electronicfootpedalscontrolthetravelandswingservicebrakefunctions. •Selectablecontrolmodesfor:FineControl,Auger,andhandcontroloftravelfunctions. •Seatandarmrestterminationswitchesimmediatelydisableallhydraulicfunctionsastheoperator

rises from the seat or lifts the left hand armrest.Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperaturegauge,hourmeterandfuelgauge.Indicatorsareprovidedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.

eNgiNe •Make/Model:CumminsQSB6.7 •Rating:260hp(194kW)@2100RPM •Alternator:130amp

electrical system12VDC

couNterWeight Total35,000lb(15,875kg)rearcounterweight(Twopieces)

sWiNg Gearmotordrivingaplanetarygearreducerwithashaftmountedpinion,externalgearshearballslewbearing bolted to the superstructure and the carbody allows the superstructure to rotate 360° •SwingSpeed:0-2.2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulicreleasethatiscontrolledfromthe

operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthroughfootactuatedpedal •HouseLockSystem:2-position,manuallypinned

hyDraulic system •HydraulicPumps:Twohighpressure,variableaxialpistonpumpswithloadsenseandpower

limitingcontrolforcranefunctions.Onevariableaxialpistonpumpforcoolingloop •DirectionalValves:Multiplepressureandflowcompensatedvalveswithintegratedreliefvalves

controlled by hydraulic pilot signals. •Pumpoutput:154gpm(583l/min)@2100RPMenginespeed.4,800psi(330bar)maximum

pressure •Filtration:5micron.

siDe frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers:TwotopandtwelvebottomsealedrollersoneachtrackframeIdler:Oilfilled,self

lubricating with spring type tensioner •TrackShoes:36inch(900mm)3-barsemigrouser

oPtioNal equiPmeNt •BoomExtension:Latticetype,swingaway -Length:30feet(9.1m) -Head:Two,19-inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings -Max.LiftingHeight:142ft(43.3m) •BoomJib:Latticetype,swingaway,storesalongboomextension -Length:20feet(6.1m) -OffsetAngles:15°&30° -Max.LiftingHeight:162feet(49.4m) •50ton(45t)hookblock-Three18inch(457mm)steelsheaves,swivelhook&safetylatch •CarbodyJackSystem:Hydrauliccylinderjacksystemandpendantcontroltofacilitatequickremoval

oftrackframesfor9’10”(3.0m)shippingwidth. •TrackShoes:30inch(760mm)3-barsemigrouser •TrackShoes:31.5inch(800mm)flatshoe •AugerReadyPackage:Includeshoses,fastenersandstowagebracketassemblymountedtothe

basesectionoftheboomwithaflowcapabilityof34gpm(130l/min) •CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone60inch(1.52m)kelly

bartotheAugerReadyPackage. •ToolCircuit:Provides5gpm(23l/min)and10gpm(45l/min)at2,500PSI(176bar)througha50

foot(15.2m)twinhosereelwithquickdisconnectfittingstooperateopencentertools. •FreeFallHoists:Allwinchesareavailableincontrolledfreefallconfigurations. •ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactory

for application support) •WorkPlatform:ModelWP750–36inx72in(0.9mx1.8m),allsteel,welded,twoperson

platform with maximum capacity of 750 lbs (340 kg). •PoleClaw:Heavy-dutypoleclawwithhydraulicclampandtilt. •Radiocontrolpackage. •Rotationresistantwirerope. •PileDrivingLeadReadyPackage:IncludesHydraulicvalves,in-cabcontrolpendant,andquick

coupler panel.

1501077 Ton Tele-Boom Crawler Crane

WiDths, Weights, aND grouND Pressures*

Shoe Width

Overall WidthArea Ground

PressureWorking WeightRetracted Extended

30 in (762mm)

12ft0in (3.66 m)

18ft2in (5.54 m)

12,360in² (7.97m²)

11.0 psi (0.77kg/cm²)

135,730 lb (61,419kg)

36 in (900mm)

12ft6in (3.81m)

18ft8in (5.69m)

14,850in² (9.57m²)

9.3psi (0.65kg/cm²)

137,554 lb (62,241kg)

* Crane equipped with: 111 ft 6 in boom, extension, jib, 75 ton hook block and 12 ton headache ball

111 ft 6 iN maiN boom, 30 ft exteNsioN & 20 ft jib

oPtioNal equiPmeNt

auger aND Pole claW light bar aND tool circuitWork Platform

VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE,

heavy-duty machines. We match massive steel

fabrications with diesel engines and state of the art

hydraulicstoprovideaPOWERFULcranethatmeetsthe

toughest demands in full load pick-and-carry as well

as lift applications.MANTIS… the one DEPENDABLE

crane that does it all on your jobsite

mantiscranes.com

FEATURES15010

77 Ton Tele-Boom Crawler Crane

Large access doors, spacious machinery compartments simplify preventative maintenance and service of the crane.

Cameras display the winch as well as the blind area directly behind the crane. Full color video display in operator cab is standard equipment.

Spacious cab, adjustable seat, and conveniently located controls are common in all Tadano Mantis Cranes.

No other craNe combiNes so maNy valuable features:

Pick-and-carry the full crane load chart through 360°. Lift and walk...even with tracks retracted. Climb steeper grades, thanks to minimized counterweight

and low center of gravity. Pull through deep mud without bogging down. Telescope or lift the boom with a full load on the hook. Save time and money on the job due to low clearance height, retract

on-the-fly tracks and telescopic boom. Independent hydrostatic track drives allow pivot turns

and counter rotation Hydraulic tool circuit option powers wide choice of Mantis-approved tools.

Tadano AML-C rated capacity indicator provides continuousfeedback of crane lift position and data

Standard operators cab tilts up for improved operator comfort. Improved design walkways allow easy access into the cab.

PoWerliNe

taDa

No m

aNti

s cor

Pora

tioN

1705

Colu

mbi

a Ave

nue •

Fran

klin

, TN

3706

4 US

A • T

oll-F

ree:

1-80

0-27

2-33

25 •

Fax:

615-

790-

6803

• m

antis

cran

es.co

m

Pile DriviNg

418-03/11