1/339 chhattisgarh state industrial development corporation limited desert cooler.pdf ·...
TRANSCRIPT
![Page 1: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/1.jpg)
1/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
![Page 2: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/2.jpg)
2/339
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
20. M/s Decora Steel Industries, Old Bus Stand, G.E. Road, Raipur (C.G.) Mo.- 8871700008/9827166809 E-mail:[email protected]
20-03-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
21. M/s Bhagyoday Furniture, Raipur Road, Dhamtari, Mo.-9425512506 E-mail: [email protected]
06-04-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
![Page 3: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/3.jpg)
3/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 To, M/s Krishna Enterprises, H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 28-01-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 14 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 4: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/4.jpg)
4/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 5: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/5.jpg)
5/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Krishna Enterprises,
THE FIRM H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Krishna Enterprises, MANUFACTURER H. No.- D-91, Sector-4,
Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed
4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22071500970 Address:-
M/s Krishna Enterprises, H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 6: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/6.jpg)
6/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2015-16 . 1460252.00 2014-15 . 14686112.00 2013-14 . 14538125.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Raipur (C.G.)
Desert Cooler
Description Capacity/Annum
1. Cooler, Steel Almirah, Steel Table, Chair & Shelves Iron/Steel.
2. Structure, Wooden Furniture (Bed etc.)
15000 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Raipur, vide E.M. Part-2 Acknowledgement No. 220111100362, Dt. 07-11-2007
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 7: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/7.jpg)
7/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Krishna Enterprises, INSPECTION H. No.- D-91, Sector-4,
Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 8: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/8.jpg)
8/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh. 5. Purchasing Department/end user will ensure to issue the
Purchase Order in accordance with the Store Purchase Rules-2002 (As Amended) vide Clause No.-13
(Subas Chandra Bhagat) Incharge Marketing
![Page 9: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/9.jpg)
9/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 10: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/10.jpg)
10/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 11: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/11.jpg)
11/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 12: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/12.jpg)
12/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 13: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/13.jpg)
13/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 14: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/14.jpg)
14/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 15: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/15.jpg)
15/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 16: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/16.jpg)
16/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 17: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/17.jpg)
17/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 18: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/18.jpg)
18/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 19: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/19.jpg)
19/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 To, M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 31-01-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 20: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/20.jpg)
20/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 21: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/21.jpg)
21/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed.
1. (a) NAME AND FULL ADDRESS OF :- M/s Chhattisgarh Steel Industries, THE FIRM Bhavan No. 35, Mahamaya Para,
Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Chhattisgarh Steel Industries, MANUFACTURER Bhavan No. 35, Mahamaya Para,
Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018 3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
(Subas Chandra Bhagat) Incharge Marketing
![Page 22: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/22.jpg)
22/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
TIN No. 22284704716 Address:-
M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
DELIVERY PERIOD : 45 Days
8. a. ANNUAL TURN OVER/ : 2013-14 . 220337.00 2014-15 . 280093.00 2015-16 . 294599.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Janjgir Champa C.G.)
Desert Cooler
Description Capacity/Annum
Cooler
2000 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer
FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG6A0000459 Dt. 25-03-2016 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding
Officers (DDOs). 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each
consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 23: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/23.jpg)
23/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Chhattisgarh Steel Industries, INSPECTION Bhavan No. 35, Mahamaya Para,
Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be
paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
(Subas Chandra Bhagat) Incharge Marketing
![Page 24: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/24.jpg)
24/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause
7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 25: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/25.jpg)
25/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 26: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/26.jpg)
26/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 27: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/27.jpg)
27/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 28: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/28.jpg)
28/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 29: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/29.jpg)
29/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 30: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/30.jpg)
30/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 31: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/31.jpg)
31/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 32: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/32.jpg)
32/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 33: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/33.jpg)
33/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 34: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/34.jpg)
34/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 35: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/35.jpg)
35/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 To, M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 31-01-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 36: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/36.jpg)
36/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 37: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/37.jpg)
37/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Akash Steel,
THE FIRM Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709
E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Akash Steel, MANUFACTURER Vellage Kalmi,
Dist.- Raigarh (C.G.) Mo.-9300395709
E-mail:[email protected] (c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22634905168 Address:-
M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709
E-mail:[email protected]
DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 38: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/38.jpg)
38/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 8. a. ANNUAL TURN OVER/ : 2013-14 . 2,30,000.00 2014-15 . 14,00,000.00 2015-16 . 6,00,000.00 b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Raigarh C.G.)
Desert Cooler
Description Capacity/Annum
Cooler 300 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer
FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG13A0000315 Dt. 05-06-2012 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding
Officers (DDOs). 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each
consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 39: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/39.jpg)
39/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Akash Steel, INSPECTION Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 40: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/40.jpg)
40/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 41: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/41.jpg)
41/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 42: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/42.jpg)
42/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 43: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/43.jpg)
43/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 44: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/44.jpg)
44/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 45: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/45.jpg)
45/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 46: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/46.jpg)
46/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 47: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/47.jpg)
47/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 48: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/48.jpg)
48/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 49: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/49.jpg)
49/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 50: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/50.jpg)
50/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 51: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/51.jpg)
51/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 To, M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 31-01-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 52: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/52.jpg)
52/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 53: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/53.jpg)
53/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Friends Agencies,
THE FIRM 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Friends Agencies, MANUFACTURER 74-C, Industrial Area, Kharmora Road,
Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed
4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22265201755 Address:-
M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
7. DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 54: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/54.jpg)
54/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . 38 Lac. 2014-15 . 30 Lac. 2015-16 . 50 Lac.
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Korba (C.G.)
Desert Cooler
Description Capacity/Annum
Desert Cooler 500 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG10A0000444 Dt. 01-09-2010
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 55: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/55.jpg)
55/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Friends Agencies, INSPECTION 74-C, Industrial Area, Kharmora Road,
Korba (C.G.) Mo.-94252-26539, 9713590600 E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 56: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/56.jpg)
56/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 57: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/57.jpg)
57/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 58: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/58.jpg)
58/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 59: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/59.jpg)
59/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 60: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/60.jpg)
60/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 61: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/61.jpg)
61/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 62: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/62.jpg)
62/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 63: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/63.jpg)
63/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 64: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/64.jpg)
64/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 65: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/65.jpg)
65/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 66: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/66.jpg)
66/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 67: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/67.jpg)
67/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 To, M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 01-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 68: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/68.jpg)
68/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 69: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/69.jpg)
69/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Ankit Industries,
THE FIRM Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Ankit Industries, MANUFACTURER Old Bus Stand,
Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22683600248 Address:-
M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
7. DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 70: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/70.jpg)
70/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2015-16 . 5442300.00 2014-15 . 5829997.00 2013-14 . 6212732.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Rajnandgaon C.G.)
Desert Cooler
Description Capacity/Annum
Steel /Wooden Furniture (Office, School/College/Hospital Furnitures, Computer Table, Wooden and Steel Table, Almirah, Rake, Cooler, Sofa Set, Dining Table, Confrence Table etc.)
6000 Nos. (3000-3000)
9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer
FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Rajnandgaon, vide E.M.
Part-2 Acknowledgement No. 220091100284, Dt. 07-09-2010 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding
Officers (DDOs). 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each
consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 71: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/71.jpg)
71/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Ankit Industries, INSPECTION Old Bus Stand,
Rajnandgaon (C.G.) Mo.-93017-33630
E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 72: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/72.jpg)
72/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 73: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/73.jpg)
73/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 74: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/74.jpg)
74/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 75: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/75.jpg)
75/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 76: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/76.jpg)
76/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 77: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/77.jpg)
77/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 78: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/78.jpg)
78/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 79: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/79.jpg)
79/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 80: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/80.jpg)
80/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 81: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/81.jpg)
81/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 82: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/82.jpg)
82/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 83: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/83.jpg)
83/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 To, M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 01-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 84: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/84.jpg)
84/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 85: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/85.jpg)
85/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Ankur Industries,
THE FIRM Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Ankur Industries, MANUFACTURER Nahar Para, Station Road,
Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed
4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22931600019 Address:-
M/s Ankur Industries, Nahar Para, Station Road, Station Road, Raipur (C.G.) Mo.-9300003531 E-mail: [email protected]
7. DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 86: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/86.jpg)
86/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2015-16 . 14857130.00 2014-15 . 12838812.00 2013-14 . 12500087.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Raipur C.G.)
Desert Cooler
Description Capacity/Annum
Tree Guard, Pressed Steel Door and Window, Cooler, Tin Box, Kothi, Hajara
3600 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer
FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Raipur, vide E.M. Part-2
Acknowledgement No. 220111100706, Dt. 12-11-2008 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding
Officers (DDOs). 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each
consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 87: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/87.jpg)
87/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Ankur Industries, INSPECTION Nahar Para, Station Road,
Nahar Para, Station Road, Raipur (C.G.) Mo.-9300003531 E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 88: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/88.jpg)
88/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 89: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/89.jpg)
89/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 90: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/90.jpg)
90/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 91: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/91.jpg)
91/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 92: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/92.jpg)
92/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 93: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/93.jpg)
93/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 94: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/94.jpg)
94/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 95: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/95.jpg)
95/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 96: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/96.jpg)
96/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 97: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/97.jpg)
97/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 98: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/98.jpg)
98/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 99: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/99.jpg)
99/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017 To, M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 100: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/100.jpg)
100/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 101: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/101.jpg)
101/339
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Gurudev Industries,
THE FIRM Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Gurudev Industries, MANUFACTURER Raipur Naka,
Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22693401926 Address:-
M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
7. DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 102: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/102.jpg)
102/339 8. a. ANNUAL TURN OVER/ : 2013-14 . 23,42,080.00 2014-15 . 8,80,389.00 2015-16 . 9,76,209.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Durg (C.G.)
Desert Cooler
Description Capacity/Annum
Cooler Body 500 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG5A0000097 Dt. 15-03-1999
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 103: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/103.jpg)
103/339 18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Gurudev Industries, INSPECTION Raipur Naka,
Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 104: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/104.jpg)
104/339
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 105: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/105.jpg)
105/339
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 106: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/106.jpg)
106/339 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
![Page 107: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/107.jpg)
107/339 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 108: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/108.jpg)
108/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 109: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/109.jpg)
109/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 110: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/110.jpg)
110/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 111: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/111.jpg)
111/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 112: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/112.jpg)
112/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 113: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/113.jpg)
113/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 114: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/114.jpg)
114/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 115: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/115.jpg)
115/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 To, M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 31-01-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 116: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/116.jpg)
116/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 117: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/117.jpg)
117/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Laxmi Engineering Works,
THE FIRM Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Laxmi Engineering Works, MANUFACTURER Industrial Area Champa,
Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22554700154 Address:-
M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
7. DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 118: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/118.jpg)
118/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2012-13 . 45.50 Lakh 2013-14 . 36.50 Lakh 2014-15 . 42.30 Lakh
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Janjgir-Champa (C.G.)
Desert Cooler
Description Capacity/Annum
All Type Wooden Furniture, Desert Cooler
1500 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Janjgir-Champa, vide E.M. Part-2 Acknowledgement No. 220061100179, Dt. 29-11-2008
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 119: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/119.jpg)
119/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Laxmi Engineering Works, INSPECTION Industrial Area Champa,
Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 120: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/120.jpg)
120/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 121: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/121.jpg)
121/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 122: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/122.jpg)
122/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 123: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/123.jpg)
123/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 124: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/124.jpg)
124/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 125: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/125.jpg)
125/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 126: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/126.jpg)
126/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 127: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/127.jpg)
127/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 128: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/128.jpg)
128/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 129: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/129.jpg)
129/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 130: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/130.jpg)
130/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 131: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/131.jpg)
131/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 To, M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715, 9691159220, 9827487237 E-mail: [email protected]/[email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 132: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/132.jpg)
132/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 133: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/133.jpg)
133/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Sachdev Furniture,
THE FIRM Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715,
9691159220, 9827487237 E-mail: [email protected]/
(b) NAME AND FULL ADDRESS OF :- M/s Sachdev Furniture, MANUFACTURER Dixit Complex, Ghurudra Road,
Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715,
9691159220, 9827487237 E-mail: [email protected]/
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
3 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed
4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22183101361 Address:-
M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
7. DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 134: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/134.jpg)
134/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2015-16 . 87,35,268.00 2014-15 . 83,13,186.00 2013-14 . 1,38,51,766.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Durg (C.G.)
Desert Cooler
Description Capacity/Annum
Air Cooler
400 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Durg, vide E.M. Part-2 Acknowledgement No. 220101100640, Dt. 05-09-2008
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 135: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/135.jpg)
135/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai Shri Sanjiv Awasthy Mob. No. 9926999936
Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Sachdev Furniture, INSPECTION Dixit Complex, Ghurudra Road,
Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715,
9691159220, 9827487237 E-mail: [email protected]/
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 136: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/136.jpg)
136/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 137: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/137.jpg)
137/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 138: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/138.jpg)
138/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 139: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/139.jpg)
139/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 140: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/140.jpg)
140/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 141: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/141.jpg)
141/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 142: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/142.jpg)
142/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 143: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/143.jpg)
143/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 144: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/144.jpg)
144/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 145: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/145.jpg)
145/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 146: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/146.jpg)
146/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 147: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/147.jpg)
147/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 To, M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 148: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/148.jpg)
148/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 149: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/149.jpg)
149/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Ambika Fabrication,
THE FIRM Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Ambika Fabrication, MANUFACTURER Odgi Naka,
Baikunthpur Mo.-09926130661 E-mail: [email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Rate ( ) FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed
4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22464802005 Address:-
M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
7. DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 150: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/150.jpg)
150/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . 33,90,560.00 2014-15 . 56,57,992.00 2015-16 . 70,81,229.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Korea (C.G.)
Desert Cooler
Description Capacity/Annum
Desert Cooler
1500 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG11A0000471, Dt. 10-04-2004
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 151: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/151.jpg)
151/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Ambika Fabrication, INSPECTION Odgi Naka,
Baikunthpur Mo.-09926130661
E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 152: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/152.jpg)
152/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 153: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/153.jpg)
153/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 154: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/154.jpg)
154/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 155: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/155.jpg)
155/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 156: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/156.jpg)
156/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 157: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/157.jpg)
157/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 158: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/158.jpg)
158/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 159: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/159.jpg)
159/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 160: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/160.jpg)
160/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 161: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/161.jpg)
161/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 162: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/162.jpg)
162/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 163: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/163.jpg)
163/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 To, M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018)
Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 04-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 164: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/164.jpg)
164/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 165: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/165.jpg)
165/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Imperial Furniture,
THE FIRM Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Imperial Furniture, MANUFACTURER Ward No. 10, Mahal Para,
Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
(c) Catagery GEN 2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22824801904 Address:-
M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
7. DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 166: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/166.jpg)
166/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2015-16 . 65,98,070.00 2014-15 . 1,38,50,126.00 2013-14 . 2,34,50,511.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-2 Acknowledgement Certificate Issued By DTIC- Korea C.G.)
Desert Cooler
Description Capacity/Annum
Cooler 150 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG11A0000169, Dt. 10-04-2014
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 167: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/167.jpg)
167/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Imperial Furniture, INSPECTION Ward No. 10, Mahal Para,
Baikunthpur Mo.-9926125879, 9424248135
E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 168: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/168.jpg)
168/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 169: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/169.jpg)
169/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 170: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/170.jpg)
170/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 171: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/171.jpg)
171/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 172: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/172.jpg)
172/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 173: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/173.jpg)
173/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 174: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/174.jpg)
174/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 175: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/175.jpg)
175/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 176: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/176.jpg)
176/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 177: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/177.jpg)
177/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 178: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/178.jpg)
178/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 179: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/179.jpg)
179/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 To, M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 31-01-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 180: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/180.jpg)
180/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 181: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/181.jpg)
181/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed.
1. (a) NAME AND FULL ADDRESS OF :- M/s Vikas Engineering Works, THE FIRM Village-Kharora, Po.-Bemcha,
Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Vikas Engineering Works, MANUFACTURER Village-Kharora, Po.-Bemcha,
Distt.-Mahasamund (C.G.) Mo.-9669302079
E-mail:[email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22062201946 Address:-
M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.)
DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat) Incharge Marketing
![Page 182: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/182.jpg)
182/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . 812530.00 2014-15 . 1514340.00 2015-16 . 2892870.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Mahasamund (C.G.)
Description Capacity/Annum
Desert Cooler 500 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Mahasamund vide EM-Part II 220121100100 Dt. 26-03-2008
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 183: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/183.jpg)
183/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Vikas Engineering Works, INSPECTION Village-Kharora, Po.-Bemcha,
Distt.-Mahasamund (C.G.) Mo.-9669302079
E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 184: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/184.jpg)
184/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 185: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/185.jpg)
185/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 186: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/186.jpg)
186/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 187: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/187.jpg)
187/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 188: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/188.jpg)
188/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 189: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/189.jpg)
189/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 190: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/190.jpg)
190/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 191: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/191.jpg)
191/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 192: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/192.jpg)
192/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 193: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/193.jpg)
193/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 194: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/194.jpg)
194/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 195: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/195.jpg)
195/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 To, M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 07-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 196: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/196.jpg)
196/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 197: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/197.jpg)
197/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Chhattisgarh Industries, THE FIRM Vill. & Post-Paneka,
Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Chhattisgarh Industries,+ MANUFACTURER Vill. & Post-Paneka,
Dist.-Rajnandgaon (C.G.) Mo.-9424127419
E-mail: [email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22083604167 Address:-
M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.)
DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 198: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/198.jpg)
198/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2012-13 . 6325784.00 2013-14 . 8234107.00 2014-15 . 11241950.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Rajnandgaon (C.G.)
Description Capacity/Annum
Desert Cooler 200 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Rajnandgaon vide EM-Part II 22/009/11/00008 Dt. 24-02-2007
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 199: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/199.jpg)
199/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Chhattisgarh Industries, INSPECTION Vill. & Post-Paneka,
Dist.-Rajnandgaon (C.G.) Mo.-9424127419
E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 200: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/200.jpg)
200/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 201: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/201.jpg)
201/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 202: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/202.jpg)
202/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 203: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/203.jpg)
203/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 204: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/204.jpg)
204/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 205: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/205.jpg)
205/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 206: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/206.jpg)
206/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 207: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/207.jpg)
207/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 208: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/208.jpg)
208/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 209: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/209.jpg)
209/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 210: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/210.jpg)
210/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/CGI/7536 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 211: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/211.jpg)
211/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 To, M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 212: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/212.jpg)
212/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 213: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/213.jpg)
213/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed.
1. (a) NAME AND FULL ADDRESS OF :- M/s S.S. Lohari Udyog, THE FIRM Vidhan Sabha Road, Saddu,
Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s S.S. Lohari Udyog, MANUFACTURER Vidhan Sabha Road, Saddu,
Raipur (C.G.)
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22791700006 Address:-
M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat)
Incharge Marketing
![Page 214: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/214.jpg)
214/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . 53.38 Lacs 2014-15 . 55.33 Lacs 2015-16 . 434.69 Lacs
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Raipur (C.G.)
Description Capacity/Annum
Desert Cooler 1200 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Raipur vide EM-Part II 220111101449 Dt. 13-12-2011
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 215: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/215.jpg)
215/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s S.S. Lohari Udyog, INSPECTION Vidhan Sabha Road, Saddu,
Raipur (C.G.) Mo.-9425241114
E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 216: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/216.jpg)
216/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 217: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/217.jpg)
217/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 218: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/218.jpg)
218/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 219: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/219.jpg)
219/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 220: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/220.jpg)
220/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 221: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/221.jpg)
221/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 222: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/222.jpg)
222/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 223: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/223.jpg)
223/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 224: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/224.jpg)
224/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 225: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/225.jpg)
225/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 226: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/226.jpg)
226/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 227: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/227.jpg)
227/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 To, M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 10-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 228: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/228.jpg)
228/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 229: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/229.jpg)
229/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Sagar Industries, THE FIRM Sharda Chowk,
Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Sagar Industries, MANUFACTURER Sharda Chowk,
Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051
E-mail:[email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22844704214 Address:-
M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.)
DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 230: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/230.jpg)
230/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2014-15 . 189345.00 2015-16 . 974642.00 2016-17 . 1889345.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Janjgir-Champa (C.G.)
Description Capacity/Annum
Desert Cooler 10000 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Janjgir-Champa vide EM-Part II 220061100847 Dt. 14-10-2014
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 231: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/231.jpg)
231/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Sagar Industries, INSPECTION Sharda Chowk,
Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051
E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 232: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/232.jpg)
232/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 233: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/233.jpg)
233/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 234: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/234.jpg)
234/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 235: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/235.jpg)
235/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 236: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/236.jpg)
236/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 237: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/237.jpg)
237/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 238: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/238.jpg)
238/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 239: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/239.jpg)
239/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 240: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/240.jpg)
240/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 241: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/241.jpg)
241/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 242: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/242.jpg)
242/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 243: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/243.jpg)
243/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 To, M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 08-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 244: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/244.jpg)
244/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 245: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/245.jpg)
245/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Mahamaya Engineering, THE FIRM Project Colony,
Baikunthpur, Mo.-09425256657 E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Mahamaya Engineering, MANUFACTURER Project Colony,
Baikunthpur,
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22464801132 Address:-
M/s Mahamaya Engineering, Project Colony, Baikunthpur,
DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 246: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/246.jpg)
246/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2014-15 . 1240000.00 2015-16 . 155740.00 2016-17 . 4212015.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per UAN Regn Certificate Issued By MSME
Description Capacity/Annum
Desert Cooler 150 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with MSME Udyog Aadhar vide EM-Part II 220071100766 Dt. 05-06-2012
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 247: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/247.jpg)
247/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Mahamaya Engineering, INSPECTION Project Colony,
Baikunthpur, Mo.-09425256657
E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 248: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/248.jpg)
248/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 249: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/249.jpg)
249/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 250: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/250.jpg)
250/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 251: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/251.jpg)
251/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 252: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/252.jpg)
252/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 253: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/253.jpg)
253/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 254: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/254.jpg)
254/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 255: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/255.jpg)
255/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 256: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/256.jpg)
256/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 257: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/257.jpg)
257/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 258: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/258.jpg)
258/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 259: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/259.jpg)
259/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 To, M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039 Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 260: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/260.jpg)
260/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 261: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/261.jpg)
261/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Sunil Steel Industry, THE FIRM Behind New Sabji Mandi,
Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
(b) NAME AND FULL ADDRESS OF :- M/s Sunil Steel Industry, MANUFACTURER Behind New Sabji Mandi,
Rapta Chowk, Chantidih, Bilaspur (C.G.)
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22324200779 Address:-
M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.)
DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 262: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/262.jpg)
262/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . NM 2014-15 . NM 2015-16 . NM
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Bilaspur (C.G.)
Description Capacity/Annum
Desert Cooler 200 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC-Bilaspur vide EM-Part II 220071100766 Dt. 05-06-2012
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 263: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/263.jpg)
263/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Sunil Steel Industry, INSPECTION Behind New Sabji Mandi,
Rapta Chowk, Chantidih, Bilaspur (C.G.)
Mo.-9425220039
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 264: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/264.jpg)
264/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 265: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/265.jpg)
265/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 266: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/266.jpg)
266/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 267: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/267.jpg)
267/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 268: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/268.jpg)
268/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 269: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/269.jpg)
269/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 270: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/270.jpg)
270/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 271: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/271.jpg)
271/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 272: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/272.jpg)
272/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 273: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/273.jpg)
273/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 274: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/274.jpg)
274/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 275: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/275.jpg)
275/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 To, M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038 Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 276: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/276.jpg)
276/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 277: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/277.jpg)
277/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Sharda Fabricators, THE FIRM Behind New Sabzi Mandi,
Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
(b) NAME AND FULL ADDRESS OF :- M/s Sharda Fabricators, MANUFACTURER Behind New Sabzi Mandi,
Rapta Chowk, Chantidhi, Bilaspur (C.G.)
Mo.-7415020038
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate
FOR Dest. E.D. & VAT Extra
As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22914203316 Address:-
M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
DELIVERY PERIOD : 45 Days (Subas Chandra Bhagat)
Incharge Marketing
![Page 278: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/278.jpg)
278/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . NM 2014-15 . NM 2015-16 . NM
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Bilaspur (C.G.)
Description Capacity/Annum
Desert Cooler 100 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC-Bilaspur vide EM-Part II 22007110767 Dt. 05-06-2012
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 279: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/279.jpg)
279/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Sharda Fabricators, INSPECTION Behind New Sabzi Mandi,
Rapta Chowk, Chantidhi, Bilaspur (C.G.)
Mo.-7415020038
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 280: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/280.jpg)
280/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 281: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/281.jpg)
281/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 282: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/282.jpg)
282/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 283: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/283.jpg)
283/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 284: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/284.jpg)
284/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 285: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/285.jpg)
285/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 286: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/286.jpg)
286/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 287: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/287.jpg)
287/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 288: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/288.jpg)
288/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 289: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/289.jpg)
289/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 290: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/290.jpg)
290/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 291: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/291.jpg)
291/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 To, M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 22-02-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 292: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/292.jpg)
292/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 293: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/293.jpg)
293/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Shyama Industries, THE FIRM Gali No. 5, Deepak Nagar,
Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Shyama Industries, MANUFACTURER Gali No. 5, Deepak Nagar,
Durg (C.G.) Ph.-98271-98885, Mo.-07898873112
E-mail: [email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 22-02-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
3 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
4 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22693103166 Address:-
M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat) Incharge Marketing
![Page 294: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/294.jpg)
294/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . 10485764.00 2014-15 . 11683480.00 2015-16 . 12131226.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Durg (C.G.)
Description Capacity/Annum
Desert Cooler 150 Nos
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Durg vide EM-Part II 220101100122 Dt. 16-03-2007
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 295: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/295.jpg)
295/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Shyama Industries, INSPECTION Gali No. 5, Deepak Nagar,
Durg (C.G.) Ph.-98271-98885, Mo.-07898873112
E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 296: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/296.jpg)
296/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 297: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/297.jpg)
297/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 298: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/298.jpg)
298/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 299: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/299.jpg)
299/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 300: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/300.jpg)
300/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 301: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/301.jpg)
301/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 302: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/302.jpg)
302/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 303: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/303.jpg)
303/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 304: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/304.jpg)
304/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 305: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/305.jpg)
305/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
(Subas Chandra Bhagat) Incharge Marketing
![Page 306: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/306.jpg)
306/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 307: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/307.jpg)
307/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 To, M/s Decora Steel Industries, Old Bus Stand, G.E. Road, Raipur (C.G.) Mo.- 8871700008/9827166809 E-mail:[email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 20-03-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 02-02-2017 & 25-02-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 15 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 308: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/308.jpg)
308/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 309: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/309.jpg)
309/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Decora Steel Industries, THE FIRM Old Bus Stand, G.E. Road, Raipur (C.G.) Mo.- 8871700008/9827166809
E-mail:[email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Decora Steel Industries, MANUFACTURER Old Bus Stand, G.E. Road,
Raipur (C.G.) Mo.- 8871700008/9827166809
E-mail:[email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 20-03-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22791702916 Address:-
M/s Decora Steel Industries, Old Bus Stand, G.E. Road, Raipur (C.G.) Mo.- 8871700008/9827166809 E-mail:[email protected]
DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat) Incharge Marketing
![Page 310: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/310.jpg)
310/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
8. a. ANNUAL TURN OVER/ : NM
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Raipur (C.G.)
Description Capacity/Annum
Room Cooler (Desert Type) 8500 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with DTIC- Raipur vide EM-Part II 220111100669 Dt. 27-09-2008
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 311: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/311.jpg)
311/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Decora Steel Industries, INSPECTION Old Bus Stand, G.E. Road,
Raipur (C.G.) Mo.- 8871700008/9827166809 E-mail:[email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 312: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/312.jpg)
312/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 313: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/313.jpg)
313/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 314: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/314.jpg)
314/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 315: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/315.jpg)
315/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 316: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/316.jpg)
316/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 317: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/317.jpg)
317/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 318: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/318.jpg)
318/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 319: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/319.jpg)
319/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 320: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/320.jpg)
320/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 321: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/321.jpg)
321/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
20. M/s Decora Steel Industries, Old Bus Stand, G.E. Road, Raipur (C.G.) Mo.- 8871700008/9827166809 E-mail:[email protected]
20-03-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 322: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/322.jpg)
322/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing
![Page 323: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/323.jpg)
323/339
Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]
No./CSIDC/MKD/PS-III/16-17/ Raipur, Dated : Registered A/D Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 To, M/s Bhagyoday Furniture, Raipur Road, Dhamtari (C.G.) Mo.-9425512506 E-mail: [email protected] Sub :- Rate Contract for the supply of Desert Cooler (Valid From dated 06-04-2017 to 21-02-2018) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/16-17/142/12472
(II) Your Offer acceptance along with undertaking submitted on dated 13-02-2017 & 05-04-2017
Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item Desert Cooler 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 16 pages
Yours faithfully,
(Subas Chandra Bhagat)
Incharge Marketing For and on behalf of the purchaser
named in CSIDC Form No.2
![Page 324: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/324.jpg)
324/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.
2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.
3. The Accountant General Chhattisgarh State, Raipur.
4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,
6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.
7. (i) The Engineer in Chief, Rural Engineering Services, Chhattisgarh Raipur, (C.G.) (ii) The Engineer in Chief, PWD, Chhattisgarh Raipur, (C.G.)
(iii) The Commissioner Nagar Palika Nigam Raipur (C.G.) (iv) The Engineer in Chief, PHED, Chhattisgarh Raipur, (C.G.)
Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority .
8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager (Operation) Indian Register of Shipping, Senior MIG-2, Secter A, 1st Floor, Infront
of Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.
Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-
462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of Registration, BIS Registration etc. before taking action i,e. inspection of stores, as the responsibility rests with the concerned authority.
9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.
10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.
11. Main file of Item- “Desert Cooler.”
(Subas Chandra Bhagat) Incharge Marketing
For and on behalf of the purchaser named in CSIDC Form No.2
![Page 325: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/325.jpg)
325/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
SCHEDULE “A” Description of Stores, Prices, Duties/Taxes
For the supply of Item- Desert Cooler as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Bhagyoday Furniture, THE FIRM Raipur Road, Dhamtari (C.G.) Mo.-9425512506 E-mail: [email protected]
(b) NAME AND FULL ADDRESS OF :- M/s Bhagyoday Furniture, MANUFACTURER Raipur Road,
Dhamtari (C.G.) Mo.-9425512506 E-mail: [email protected]
(c) Catagery GEN
2. VALIDITY OF RATE CONTRACT :- From 06-04-2017 to 21-02-2018
3. DESCRIPTION OF ITEM- Desert Cooler
Sl. No. Item Code Item Description Offer Rate FOR Dest.
E.D. & VAT Extra As Applicable Rate Per Unit
1 2 3 4 1 CSIDC DC001 Schedule-1.
Desert Cooler with Exhaust Fan (18” /450 mm): 6582.00
2 CSIDC DC002 Schedule-2. Desert Cooler with Exhaust Fan (24”/600mm):
8500.00
3 CSIDC DC003 Schedule-3. Desert Cooler (16” min. size cooler Fan):
4637.00
4 CSIDC DC004 Schedule-4. Desert Cooler (with 20”/ 500 mm size Cooler Fan):
5109.00
5 CSIDC DC005 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18”/450mm)
8184.00
6 CSIDC DC006 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18”/450mm in Honeypad Panel
9002.00
Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State)
5. EXCISE DUTY : Not Applicable
6. SALES TAX /VAT : Extra, if applicable
TIN No. 22222100978 Address:-
M/s Bhagyoday Furniture, Raipur Road, Dhamtari (C.G.) Mo.-9425512506 E-mail: [email protected]
DELIVERY PERIOD : 45 Days
(Subas Chandra Bhagat) Incharge Marketing
![Page 326: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/326.jpg)
326/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
8. a. ANNUAL TURN OVER/ : 2013-14 . 2379794.00 2014-15 . 3572650.00
b. MONETARY LIMIT : NM
c. INSTALLED CAPACITY : (As per DTIC EM Part-II Acknowledgement Certificate Issued By DTIC- Dhamtari (C.G.)
Description Capacity/Annum
Coolers 200 Nos.
9. SLAB DISCOUNT (IF ANY) : Nil
10. PRICES : Prices are Firm and Final
11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER
12. STATUS OF RC HOLDING : Manufacturer FIRM
13. REGISTRATION STATUS : Manufacturer is Registered with MSME UAN- CG04A0000447, Dt. 05-09-2002
14 BIS LICENSE : Not Applicable
15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).
16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.
17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai OR ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal (M.P.)
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.)
OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)
OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)
(Subas Chandra Bhagat)
Incharge Marketing
![Page 327: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/327.jpg)
327/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) Bhilai
Shri Sanjiv Awasthy Mob. No. 9926999936 Email- [email protected] OR Dy. Director (Q&A), DGS&D, Bhilai (C.G.) DGS&D, Sector 1, Street-10 Old Telegraph Office, Bhilai (C.G), Fax No.- 0788-2223374 OR Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339
E-mail- [email protected]
OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033-22873274 OR
General Manager (Inspection) RITES Ltd. Rajnish Ahuja Western Region (Inspection) Pho. No 2201-2523/5573 Direct 2201 7434 Mob. 08600 017717 Fax 022 22084155, 2222016219
E-mail- [email protected], [email protected] OR
Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.) Shri Jitendra Raj Mob. No. 9752848321
E-mail- [email protected]
19. PLACE WHERE THE STORES At Manufacturer’s Factory at ARE TO BE OFFERED FOR M/s Bhagyoday Furniture, INSPECTION Raipur Road,
Dhamtari (C.G.) Mo.-9425512506 E-mail: [email protected]
20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.
21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause 7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.
22. Special Note 1. Purchasing Departments/end user will ensure to sending the copy of every Purchase order to this office.
(Subas Chandra Bhagat) Incharge Marketing
![Page 328: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/328.jpg)
328/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.
(Subas Chandra Bhagat) Incharge Marketing
![Page 329: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/329.jpg)
329/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
CSIDC/MKD/TECH/2016-17/20 ANNEXURE-B
TECHNICAL PARTICULARS FOR DESERT COOLER
TSC 22-10-2016
SPECIFICATION OF DESERT & ROOM COOLER (G.I. SHEET BODY)
Schedule-1. Desert Cooler with Exhaust Fan (18” /450 mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall dimensions: i Width 660mm (26") ii Depth 660mm (26") iii Height 1100mm (43") 2 Bottom tank size: 660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four
corners of Bottom tank shall be completely welded. 3 Front and upper portion
side pillars of cabinet Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 2 mm GI weld mesh in the frame of GI Sheet or made up of slotted sheet of same size.
5 cooling pad Made by chicken mesh of 0.56 mm wire filled with wood wool. 6 Exhaust fan Heavy duty duly copper wound, 450 mm Sweep, 1350 RPM, 255 watt,
1.24 AMP., Crompton/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed control Electronic regulator 1000 W min. 10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction
air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr.
long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat
of metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Approx max cooling
room area with normal ceiling height 8-10ft.
400 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 330: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/330.jpg)
330/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 Schedule-2. Desert Cooler with Exhaust Fan (24" /600mm):
Sl. No. Detail Requirements A Constructional Details: 1 Overall
dimensions:
i Width 900mm (36") ii Depth 750mm (30") iii Height 1500mm (60") 2 Tank sizes: i Bottom Tank 1200mm x 725mm x 250 mm made by 0.8 mm thick sheet(GI). All four
corners of Bottom tank shall be completely welded. ii Upper Tank 200mm x 725 mm x 75 mm made by 0.80 mm thick GI sheet. 3 Front and side
Pillars of cabinet Front cabinet made of 0.8 mm GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side and back panels
Made by 1'' x 1'' x 2.5mm GI weld mesh in frame of 1”x1”, 2.5 mm MS angle.
5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Exhaust fan Heavy duty copper wound 600 mm Sweep, 900 RPM, 550 watt input 1.24
Amp, Crompton/GE/ Unitex / MMI /EURO make or ISI Marked only (IS: 2312 with latest amendments)). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible) 40 W, 2.8 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Front grill Fixed type made by 25” X 25” 0.56 mm thick GI Sheet. 10 Power Cable 3 Core copper flexible wire Multi strands & 3 pin top 15 AMP. (3 mtr. long) 11 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 12 Approx max
cooling room area with normal ceiling height 8-10ft.
1000 Sq ft
13 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner in
a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 14 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 331: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/331.jpg)
331/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 Schedule-3. Desert Cooler (16 inch min. size cooler Fan):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 550mm Ii Depth 560mm Iii Height 710mm 2 Bottom tank Height 170mm shall be leak proof made of 0.70mm GI sheet shall be mounted
at the bottom of the cabinet. Bottom tank shall be from single sheet (one piece) and all four corners completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56 mm (24 SWG) of GI sheets. Complete cabinet Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 17”x20”x3” with Six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels will be made of GI sheets with sufficient slots to have maximum cooling effect.
5 Fan Room cooler fan shall be cooler fan of 15” size min., Aluminum/Fibre blade 0.9 mm thick sheet with 1/7 HP 106 watt motor three speed motor Crompton /GE / Unitex / MMI /EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire with Multi strands & 3 pin top 5 AMP. (2.5 mtr. long)
10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
11 Approx max cooling room area with normal ceiling height 8-10ft.
100 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra) PS-III
![Page 332: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/332.jpg)
332/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 Schedule-4. Desert Cooler (with 20 inch 500 mm size Cooler Fan):
S No
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 710mm Ii Depth 610mm Iii Total Height 910mm 2 Tank Size: Depth of Upper tank 50mm Depth of Bottom tank Height 180mm shall be leak proof made of 0.70mm GI sheet shall be mounted at
the bottom of the cabinet. All four corners of Bottom tank shall be completely welded.
3 CABINET:
The entire cabinet will be made of 0.70mm GI sheets except side panels which are all made of 0.56mm (24 SWG) of GI sheets. All the nuts, bolts washers should be fully galvanized and of reputed make. Fitted with 6x12mm galvanized nut-bolts.
4 COOLER FRONT, GRILL & SIDE PANELS:
The cabinet be fitted with an adjustable grill at front made from GI sheet of size 21”x24”x3” with six direction air-flow. Hinged type water filling arrangement shall be provided in the bottom of the cooler.
Side panels GI sheets with sufficient slots to have maximum cooling effect. 5 Fan Desert cooler fan shall be 18" size cooler fan with Aluminum blade 0.9 mm
thick sheet with 1/7 HP three speed 106 watt. motor Crompton /GE / Unitex / MMI / EURO make or ISI Marked only (IS-996-2009 with latest amendments)
6 Water pump Magnet Driven Pump (Sub-mersible) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in VIRGIN PLASTIC body.
7 On/Off Switch 5 A Switches separately for Fan & Motor 8 Fan motor Speed
control switch Control switch with three speeds.
9 Power Cable 3 Core copper flexible wire of Multi strands & 3 pin top 5 AMP. (2.5 mtr. long) 10 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal
Primer, with spray gun, for elegant appearance of entire cooler. 11 Approx max cooling
room area with normal ceiling height 8-10ft.
200 Sq ft
12 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible manner
in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 13 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 333: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/333.jpg)
333/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 Schedule-5. Desert Cooler with Propeller type ventilating Fan (18" /450 mm):
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 750mm (30") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
750mm x 660mm x 230 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts.
4 Side panels Made by 1" x 1" x 14 swg GI weld mesh in the frame of GI Sheet. 5 cooling pad Made by chicken mesh of 0.56mm wire filled with wood wool. 6 Propeller type
ventilating Fan Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Motor 9 Fan Motor Speed
control Electronic regulator 1000 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow.
11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long)
12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of metal Primer, with spray gun, for elegant appearance of entire cooler.
13 Approx max cooling room area with normal ceiling height 8-10ft.
600 Sq ft
14 Marking: Each cooler shall have following information on the plate in a indelible, permanent and legible
manner in a location where it is accessible and visible. I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
(S.N. Chopra)
PS-III
![Page 334: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/334.jpg)
334/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017 Schedule- 6. Desert Cooler with Propeller type ventilating Fan (18" /450 mm) in Honeypad panel :
Sl. No.
Detail Requirements
A Constructional Details: 1 Overall dimensions: I Width 660mm (26") Ii Depth 660mm (26") Iii Height 1200mm (48") 2 Bottom tank size:
660mm x 660mm x 220 mm made by 0.8 mm thick sheet (GI). All four corners of Bottom tank shall be completely welded.
3 Front and upper portion side pillars of cabinet
Made by 0.8 mm thick GI sheet. Fitted with 6x12mm galvanized nut-bolts. Upper top section of Desert Cooler shall be in two pieces (so that the back section can be easily opened for removal of Honey pad foe cleaning/replacement)
4 Side panels Covered with GI Sheet panels of 0.07 mm thick. 5 cooling pad Made by Honey pad size 36x24x4 inch fitted on slotted GI Sheets C section in
backside of Cooler. Minimum 20 slots of 20mm size for water draining to bottom tank.
6 Propeller type ventilating Fan
Heavy duty duly copper wound, 425mm Sweep, 1350 RPM, Direction of rotation clockwise, 400appx watt, 1.9 AMP., GEC/GE/ Unitex / MMI / EURO make or ISI Marked only (IS: 2312 with latest amendments). Rating plate shall be as per norms.
7 Vertical pump Magnet Driven Pump (Sub-mersible type) 18 W, 1.6 Mtr lift. Copper wound with TOP Circuit and housed in virgin plastic body.
8 On/Off Switch 5 A Switches separately for Fan & Pump 9 Fan Motor Speed
control Electronic regulator 1500 W min.
10 Front grill Made of GI sheet 24 Gauge of size 21'' x 24" x 3” with six direction air-flow. 11 Power Cable 3 Core copper flexible wire Multi strand & 3 pin top 5 AMP. (2.5 mtr. long) 12 Paint Two coat of Silver Ash Hammer tone epoxy paint, after at least one coat of
metal Primer, with spray gun, for elegant appearance of entire cooler. 13 Max cooling 400 Sq ft Approx room area with normal ceiling height 8-10ft. 14 Marking:
Each cooler shall have following information on the plate in a indelible, permanent and legible manner in a location where it is accessible and visible.
I Name of manufacturer; Ii Type of cooler & size of fan. Iii Total current and voltage; and Iv Power input. 15 Warranty Minimum One Year from the date of Supply.
Recommended by Technical Specification Committee Dated 22-10-2016
(S.N. Chopra) PS-III
![Page 335: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/335.jpg)
335/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
SCHEDULE ‘B’
(SPECIAL CONDITION OF CONTRACT) Desert Cooler
Rate Contract Will be governed by the Terms & Conditions laid down in the
CSIDC FORM NO. 1 & 2
(Subas Chandra Bhagat) Incharge Marketing
![Page 336: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/336.jpg)
336/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
SCHEDULE “C”
LIST OF PARALLEL RATE CONTRACT FOR ITEM- DESERT COOLER .
S.No. Name of Tenderers Valid Up to Rate Contract No. 1. M/s Krishna Enterprises,
H. No.- D-91, Sector-4, Devendra Nagar, Raipur (C.G.) Ph.- 0771-4055418, Mo.-9300694128, E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/KE/7524 Dt.: 22-02-2017
2. M/s Chhattisgarh Steel Industries, Bhavan No. 35, Mahamaya Para, Post & Tahsil-Sakti, Mo.-9301006090, 9329095837 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CSI/7525 Dt.: 22-02-2017
3. M/s Akash Steel, Vellage Kalmi, Dist.- Raigarh (C.G.) Mo.-9300395709 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AS/7526 Dt.: 22-02-2017
4. M/s Friends Agencies, 74-C, Industrial Area, Kharmora Road, Korba (C.G.) Land Line No. 07759221457 Mo.-94252-26539, 9713590600 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/FA/7527 Dt.: 22-02-2017
5. M/s Ankit Industries, Old Bus Stand, Rajnandgaon (C.G.) Mo.-93017-33630 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7528 Dt.: 22-02-2017
6. M/s Ankur Industries, Nahar Para, Station Road, Raipur (C.G.) Ph. 0771-2527202 Mo.-9300003531 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AI/7529 Dt.: 22-02-2017
7. M/s Gurudev Industries, Raipur Naka, Durg (C.G.) Mo.-9752999559, 9691526287 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/GI/7530 Dt.: 22-02-2017
8. M/s Laxmi Engineering Works, Industrial Area Champa, Distt.-Janjgir-Champa (C.G.) Mo.-07819246021, 9425223140 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/LEW/7531 Dt.: 22-02-2017
9. M/s Sachdev Furniture, Dixit Complex, Ghurudra Road, Durg (C.G.) Ph.-0788-4700111, Mo.-098271-13403, 093016-18715 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7532 Dt.: 22-02-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 337: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/337.jpg)
337/339
Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
10. M/s Ambika Fabrication, Odgi Naka, Baikunthpur Mo.-09926130661 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/AF/7533 Dt.: 22-02-2017
11. M/s Imperial Furniture, Ward No. 10, Mahal Para, Baikunthpur Mo.-9926125879, 9424248135 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/IF/7534 Dt.: 22-02-2017
12. M/s Vikas Engineering Works, Village-Kharora, Po.-Bemcha, Distt.-Mahasamund (C.G.) Mo.-9669302079 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/VEW/7535 Dt.: 22-02-2017
13. M/s Chhattisgarh Industries, Vill. & Post-Paneka, Dist.-Rajnandgaon (C.G.) Mo.-9424127419 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/CI/7536 Dt.: 22-02-2017
14. M/s S.S. Lohari Udyog, Vidhan Sabha Road, Saddu, Raipur (C.G.) Mo.-9425241114 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSLU/7537 Dt.: 22-02-2017
15. M/s Sagar Industries, Sharda Chowk, Janjgir, Dist.-Janjgir-Champa (C.G.) Mo.-9425587051 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7538 Dt.: 22-02-2017
16. M/s Mahamaya Engineering, Project Colony, Baikunthpur, Mo.-09425256657 E-mail:[email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/ME/7539 Dt.: 22-02-2017
17. M/s Sunil Steel Industry, Behind New Sabji Mandi, Rapta Chowk, Chantidih, Bilaspur (C.G.) Mo.-9425220039
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SSI/7540 Dt.: 22-02-2017
18. M/s Sharda Fabricators, Behind New Sabzi Mandi, Rapta Chowk, Chantidhi, Bilaspur (C.G.) Mo.-7415020038
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SF/7541 Dt.: 22-02-2017
19. M/s Shyama Industries, Gali No. 5, Deepak Nagar, Durg (C.G.) Ph.-98271-98885, Mo.-07898873112 E-mail: [email protected]
22-02-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/SI/7542 Dt.: 22-02-2017
20. M/s Decora Steel Industries, Old Bus Stand, G.E. Road, Raipur (C.G.) Mo.- 8871700008/9827166809 E-mail:[email protected]
20-03-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/DSI/7543 Dt.: 20-03-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 338: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/338.jpg)
338/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
21. M/s Bhagyoday Furniture, Raipur Road, Dhamtari, Mo.-9425512506 E-mail: [email protected]
06-04-2017 to
21-02-2018
Rate Contract No. CSIDC/MKD/ 16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
(Subas Chandra Bhagat)
Incharge Marketing
![Page 339: 1/339 Chhattisgarh State Industrial Development Corporation Limited Desert Cooler.pdf · 2017-04-11 · 1/339 Chhattisgarh State Industrial Development Corporation Limited (A Government](https://reader034.vdocuments.us/reader034/viewer/2022042207/5ea96ce0f1664518893a1624/html5/thumbnails/339.jpg)
339/339 Rate Contract No. CSIDC/MKD/16-17/142/12472/DC/BF/7544 Dt.: 06-04-2017
SCHEDULE – “D”
FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of
Department Quantity and Value of Orders Received (Rs.)
Quantity and Value of Orders Executed (Rs.)
Balance Quantity and Value to be Supplied (Rs.)
Reasons
Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.
Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges
2. Nil report should also be Submitted.
(Subas Chandra Bhagat) Incharge Marketing