VC-22D ElectronicValve Controller

To Optional Remote Computer Control (Local)

Computer Optional Remote Control

Optional Remote Control Modem Modem

Main Transmission Line

CLA-VAL Model 133-01Metering & Flow Rate Controller

Computer

T T VC-22D

Schematic DiagramItem Description1 100-01 Hytrol Main Valve2 CS2S Solenoid Control3 CK2 Solenoid By-Pass4 VC-22D Electronic Controller5 X117 Series Position Transmitter6 DPT Differential Pressure Transmitter7 CK2 Isolation Valve

Optional FeaturesItem DescriptionA X46A Flow Clean StrainerB CK2 Isolation ValveC CV Flow Control (Closing)D Check FeatureF Independent Operation PressureH Atmospheric DrainP X141 Pressure GaugeS CV Flow Control (Opening)Y X43 "Y" Strainer Typical Applications

The Model 133-01 Metering and Flow Rate Controller is typically installed in a fluiddelivery system where the flow rate is measured and changed from a remote locationsuch as a SCADA system.

The Cla-Val Model 133-01 Metering Valve is a completely self con-tained valve and control system that accurately meters and/orcontrols flow rate when used on valves with pressure differentialsof less than 100 psid.

Using a VC-22D Electronic Controller, data from valve mounted differen-tial pressure and position transmitters are assimilated into a proprietaryalgorithm program that is based on valve size and configuration toarrive at a flow measurement. This information is used for retransmis-sion and/or compared with a local or remote set-point for valve flowcontrol.

The 133-01 Control System can also be installed on new or existinghydraulic pilot control valves such as: pressure reducing, pressuresustaining, flow limiting and level control to transmit flow rate with-out disturbing the valve's primary hydraulic function(s). Specify Kit133-01 for these applications. Consult factory.

For all applications, specify voltage, minimum/maximum pressuresand flow rates, valve size, pressure class and optional features.Consult your local representative or the Factory for engineering assis-tance and valve selection.

• Automatically Measures and Controls Flow Rate Without a Separate Metering Device • Completely Self Contained• Reliable Analog Communications• Retransmission Capabilities• Ideal for Retrofitting Existing Valves• Security System to Prevents Unauthorized Changes• Optional Totalizing Capabilities

Metering ValveMODEL 133-01

Model 133-01 (Uses 100-01 Hytrol Main Valve)

Model 133-01 Dimensions (Inches)

Component Standard Material CombinationsBody & Cover Ductile Iron Cast Steel Bronze

Available Sizes 3" - 36"80 - 900mm

3" - 16"80 - 400mm

3" - 16"80 - 400mm

Disc Retainer &Diaphragm Washer Cast Iron Cast Steel BronzeTrim: Disc Guide, Seat & Cover Bearing

Bronze is StandardStainless Steel is Optional

Disc Buna-N® RubberDiaphragm Nylon Reinforced Buna-N® RubberStem, Nut & Spring Stainless SteelFor material options not listed, consult factory.Cla-Val manufactures valves in more than 50 different alloys.

Materials

GGGG

DDDDInlet

AAAA

X

100-01Grooved

EE

CC(MAX)

K

J

H

Inlet Outlet

B (Diameter)

Y

Z

GGGGGG

DInletDDDDD

FFF

X

100-01Threaded &

Flanged

A

E

C(MAX)

K

J

H

Inlet Outlet

AAAAA

B (Diameter)

Valve Body & CoverPressure Class

Flanged Grooved Threaded

Grade Material ANSIStandards*

150Class

300Class

300Class

End‡Details

ASTM A536 Ductile Iron B16.42 250 400 400 400

ASTM A216-WCB Cast Steel B16.5 285 400 400 400

UNS 87850 Bronze B16.24 225 400 400 400

Note: * ANSI standards are for flange dimensions only. Flanged valves are available faced but not drilled. ‡ End Details machined to ANSI B2.1 specifications.

Valves for higher pressure are available; consult factory for details

Pressure Ratings (Recommended Maximum Pressure - psi)

Valve Size (Inches)A ThreadedAA 150 ANSIAAA 300 ANSIAAAA Grooved EndB DiameterC MaximumCC Maximum Grooved EndD ThreadedDD 150 ANSIDDD 300 ANSIDDDD Grooved EndEEE Grooved EndF 150 ANSIFF 300 ANSIG ThreadedGG 150 ANSIGGG 300 ANSIGGGG Grooved EndH NPT Body TappingJ NPT Cover Center PlugK NPT Cover TappingStem TravelApprox. Ship Weight (lbs)Approx. X Pilot SystemApprox. Y Pilot SystemApprox. Z Pilot System

12.5012.0013.2512.509.128.197.256.256.006.386.002.063.123.754.134.504.004.384.250.500.500.500.8070151111

3

15.0015.6215.0011.5010.629.31

7.507.887.503.194.254.505.00

5.005.315.000.750.750.751.10140171212

4—

—

—

20.0021.0020.0015.7513.3812.12

10.0010.50

—4.316.005.506.25

6.006.50—

0.750.750.751.70285292020

6—

—

—

—

8

25.3826.3825.3820.0016.0014.62

12.6913.25

5.317.566.757.50

8.008.50

1.001.001.002.30500312222

—

—

—

—

—

10

29.7531.12

23.6217.12

14.8815.56

9.25

8.008.75

8.629.31

1.001.001.002.80780332424

—

—

—

—

—

—

—

—

12

34.0035.50

28.0020.88

17.0017.75

10.75

9.5010.25

13.7514.50

1.001.251.003.401165362626

—

—

—

—

—

—

—

—

14

39.0040.50

32.7524.19

19.5020.25

12.62

10.5011.50

14.8815.62

1.001.501.004.001600

402929

—

—

—

—

—

—

—

—

16

41.3843.50

35.5025.00

20.8121.62

15.50

11.7512.75

15.6916.50

1.002.001.004.502265

403030

—

—

—

—

—

—

—

—

18

46.0047.64

41.5039.06

12.95

15.0015.00

1.001.001.005.102982

433232

—

—

—

—

——

—

—

——

—

—

20

52.0053.62

45.0041.90

15.00

16.5016.50

1.001.001.005.633900473434

—

—

—

—

——

—

—

——

—

—

24

61.5063.24

53.1643.93

30.7531.62

17.75

19.2519.25

22.0622.90

1.001.001.006.756200

683939

—

—

—

—

—

—

—

—

30

63.0064.50

56.0054.60

21.31

22.5024.00

2.002.002.007.507703

794042

—

—

—

—

——

—

—

——

—

—

36

72.7574.75

66.0059.00

24.56

28.5030.00

2.002.002.008.50

11720854547

—

—

—

—

——

—

—

——

—

—

Valve Size (mm)A ThreadedAA 150 ANSIAAA 300 ANSIAAAA Grooved EndB DiameterC MaximumCC Maximum Grooved EndD ThreadedDD 150 ANSIDDD 300 ANSIDDDD Grooved EndEEE Grooved EndF 150 ANSIFF 300 ANSIG ThreadedGG 150 ANSIGGG 300 ANSIGGGG Grooved EndH NPT Body TappingJ NPT Cover Center PlugK NPT Cover TappingStem TravelApprox. Ship Weight (kgs)Approx. X Pilot SystemApprox. Y Pilot SystemApprox. Z Pilot System

150

508533508400340308

254267—

110152140159—

152165—

0.750.750.7543

129737508508

—

—

100

381397381292270236

19120019181108114127

1271351270.750.750.752864432305305

—

—

—

200

645670645508406371

322337

135192171191

203216

1.001.001.0058227788559559

——

——

——

——

——

250

756790

600435

378395

235

203222

219236

1.001.001.0071

354839610610

—

—

—

—

—

—

—

—

300

864902

711530

432451

273

241260

349368

1.001.251.0086528915661661

—

—

—

—

—

—

—

—

350

9911029

832614

495514

321

267292

378397

1.001.501.00102726

1016737737

—

—

—

—

—

—

—

—

400

10511105

902635

528549

394

298324

399419

1.002.001.00114

10271016762762

—

—

—

—

—

—

—

—

450

11681210

1054992

329

381381

1.001.001.00130

13531093813813

—

—

—

—

——

—

—

——

—

—

500

13211326

11431064

381

419419

1.001.001.0014317691194864864

—

—

—

—

——

—

—

——

—

—

600

15621606

13501116

781803

451

489489

560582

1.001.001.00171

28121728991991

—

—

—

—

—

—

—

—

750

16001638

14221387

541

572610

2.002.002.00190

3494200710161067

—

—

—

—

——

—

—

——

—

—

900

18481899

16761499

624

724762

2.002.002.00216

5316215911431194

—

—

—

—

——

—

—

——

—

—

80318305337318232208184159152162152527995

1051141021111080.500.500.502032

381280280

Model 133-01 Dimensions (mm)

Model 133-01 Metric Dimensions (Uses 100-01 Hytrol Main Valve)

GGGG

DDDDInlet

AAAA

X

100-01Grooved

EE

CC(MAX)

K

J

H

Inlet Outlet

B (Diameter)

Y

Z

GGGGGG

DInletDDDDD

FFF

X

100-01Threaded &

Flanged

A

E

C(MAX)

K

J

H

Inlet Outlet

AAAAA

B (Diameter)

Temperature Range Water: to 180°F / 82°C

Rubber Parts: Buna-N® Rubber Synthetic

Solenoid Control Body: Brass ASTM B283

Enclosure: NEMA Type 1,2,3,3S,4,4X general purpose watertight NEMA Type 6,6P,7,9 watertight explosion proof available

Voltage: 24, 120, 240, 480 - 60Hz AC 24 - DC

Max. operating pressure differential: 100 psi

Coil: Insulation Molded Class F Watts AC 6 AC Volt Amps Inrush 30 AC Volt Amps Holding 16 Watts DC 10.6

*For specifications on other 133 Series Valves, please consult factory. The 133-01 is shown.

Pilot System Specifications*

133-01Valve

Selection

100-01 Pattern: Globe (G), Angle (A), End Connections: Threaded (T), Grooved (GR), Flanged (F) Indicate Available Sizes

Inches 3 4 6 8 10 12 14 16 18 20 24 30 36

mm 80 100 150 200 250 300 350 400 450 500 600 750 900

MainValve

100-01

Pattern G, A G, A G, A G, A G, A G, A G, A G, A G G G, A G G

End Detail T, F,Gr

F, Gr

F, Gr*

F, Gr* F F F F F F F F F

Suggested Flow (gpm)

Maximum 460 800 1800 3100 4900 7000 8400 11000 14000 17000 25000 42000 50000

Maximum Intermittent 580 990 2250 3900 6150 8720 10540 13700 17500 21700 31300 48000 62500

Suggested Flow

(Liters/Sec)

Maximum 29 50 113 195 309 442 530 694 883 1073 1577 2650 3150

Maximum Intermittent 37 62 142 246 387 549 664 863 1104 1369 1972 3028 3940

100-01 Series is the full internal port Hytrol. *Globe Grooved Only

CLA-VAL EUROPEChemin des Mésanges 1CH-1032 Romanel/Lausanne, SwitzerlandPhone: 41-21-643-15-55www.cla-val.chE-mail: info@cla-val.ch

CLA-VAL FRANCEPorte du Grand Lyon 1ZAC du Champ du PérierFrance - 01700 NeyronPhone: 33-4-72-25-92-93www.cla-val.chE-mail: info@cla-val.ch

CLA-VAL1701 Placentia Avenue • Costa Mesa, CA 92627

800-942-6326 • Web Site: www.cla-val.com • E-mail: info@cla-val.com

© COPYRIGHT CLA-VAL 2021 Printed in USA Specifications subject to change without notice. visit www.cla-val-latinamerica.com for Spanish literature

CLA-VAL CANADA4687 Christie DriveBeamsville, OntarioCanada L0R 1B4Phone: 905-563-4963www.cla-val.comE-mail sales@cla-val.ca

CLA-VAL UKDainton House, Goods Station RoadTunbridge Wells Kent TN1 2 DH EnglandPhone: 44-1892-514-400www.cla-val.chE-mail: info@cla-val.co.uk

CLA-VAL ASIA PACIFIC45 Kennaway RoadWoolston, Christchurch, 8023New ZealandPhone: 64-39644860www.cla-valpacific.comE-mail: info@cla-valpacific.com

E-133-01 with VC-22D Controller(R-03/2021)

When Ordering, Specify 1. Catalog No. 133-01 2. Valve Size 3. Pattern - Globe or Angle 4. Pressure Class 5. Threaded or Flanged 6. Trim Material 7. Electrical Specifications 8. Desired Options 9. When Vertically Installed

Valve Options

X101AR ValvePosition Indicatorwith Air Release

X144 e-FlowMeter

X101 Valve Position

Indicator

X141PressureGauge

X43HStrainer

StainlessSteel Pilot