131756382-project-specification.pdf

PROJECT SPECIFICATION TAKREER

PROJECT No 5578

Agreement no 07-5578-F-1

RUWAIS REFINERY EXPANSION PROJECT

COMPANY Doc. No. 5578- DGS -PU-020 ENG Doc. 25418-1000-3PS-P000-P0020

Rev. 5

INTERNATIONAL BECHTEL CO. LTD.

THE DESIGN OR PART THEREOF CONTAINED IN THIS DOCUMENT WAS DEVELOPED FOR TAKREER FOR THE PROJECT AND REMAINS THE PROPERTY OF TAKREER. ALL

INTERNATIONAL BECHTEL CO. LTD. PROPRIETARY INFORMATION OR UNDERLYING INTELLECTUAL PROPERTY UTILIZED IN THE CREATION OF THE DESIGN OR INFORMATION CONTAINED HEREIN SHALL REMAIN THE PROPERTY OF INTERNATIONAL BECHTEL CO. LTD..

ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED of 43

PROJECT SPECIFICATION

PIPING CLASS INDEX


FRONT END ENGINEERING DESIGN

TAKREER PROJECT SPECIFICATION

PIPING CLASS INDEX

TAKREER

PROJECT No 5578




Rev.5

ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED

of 43

This page is a record of all revisions of this document. All previous issues are hereby superseded and are to be destroyed.

NOTES:

Revisions after IFD are denoted as follows:

(a) By a vertical line in the right-hand margin against the revised text.

(b) By a triangle symbol for graphics, the revision number being denoted within the symbol. Revision symbols are positioned adjacent to the revision.

(c) CHKD = Checked by, DISC = Discipline Lead, PEM = Project Engineer Manager, PMC = Project Management Consultant.

APPROVED REV DATE

REASON

FOR ISSUE BY CHKD

DISC PEM PMC COMPANY

5 23-04-09 Reissued for IFF CFJ CM RW/CC AG




1 13-08-08 IFF CFJ CM RW/CC AG

0 13-06-08 IFA CFJ CM RW/CC AG

Signed (Initials)


PIPING CLASS INDEX

TAKREER

PROJECT No 5578




Rev.5


of 43

PARAGRAPHS REVISED IN THIS ISSUE

Para. No. Para. No. Para. No. Para. No.

4.0

Para 5.0 – various revisions as marked

HOLDS in this issue

No. Section Hold on

TAKREER


1. GENERAL.........

2. CODES AND ST


PIPING CLASS INDEX

TAKREER

PROJECT No 5578




Rev.5


of 43

1. GENERAL

This specification replaces the Piping Class Index section of Design General Specification No DGS-PU-003 Appendix 5 Revision 0.

1.1 PURPOSE

This specification is intended for use as the Index for all Piping Classes.

2. CODES AND STANDARDS

The following Code and Standard referred to shall apply.

15th January 2008 is the effective date for codes and standards i.e. the edition of codes or standards current on that date shall be the one to be used.

2.1 CODES, REGULATIONS AND STANDARDS

ASME B16.5 Pipe Flanges and Flanged Fittings

ASME B16.47 Large Diameter Steel Flanges

ASME B31.3 Process Piping

3. REFERENCE DOCUMENTS

The project specifications tabulated below form part of this specification.

3.1 PROJECT STANDARD SPECIFICATIONS

Project Specifications AMD Number Specification Title

25418-3000-3PS-P000-P0003 5578-AMD-PU-003 Technical Specification for Piping Systems

25418-3000-3PS-P000-P0010 5578-AMD-PU-010 Requirements for Glass Fiber Reinforced Epoxy and Polyester Pipes and Fittings Connections

25418-3000-3PS-P000-P0011 5578-AMD-PU-011 Design and Installation of Glass Fiber Reinforced Epoxy and Polyester Piping

25418-1000-3PS-P000-P0016

5578-AMD-PU-016 Piping Material Purchase Specification (SPE Specs)

25418-3000-3PS-P000-P0021 5578-DGS-PU-021 Material Classes – Class 150 Process



PIPING CLASS INDEX

TAKREER

PROJECT No 5578




Rev.5


of 43

Project Specifications AMD Number Specification Title


25418-3000-3PS-P000-P0024 5578-DGS-PU-024 Material Classes – Class 900 & above Process

25418-3000-3PS-P000-P0025 5578-DGS-PU-025 Material Classes – Utility Classes

25418-3000-3PS-NW00-N0004 5578-AMD-MW-004 Materials and Fabrication Requirements for CS Piping and Equipment in Severe Service

25418-3000-3PS-NW00-N0008 5578-AMD-MW-008 Design General Specification Metallic Materials

25418-3000-3PS-NWP0-N0001 5578-AMD-MW-002 Amendment to Design General Specification DGS-MW-002 (Welding, NDE and Prevention of Brittle Fracture of Piping)

4. CLARIFICATIONS

The Piping Class Index has been modified to include Service Codes, and the Service column has been revised to include the latest philosophy concerning Low Severe Service (LSS), SOUR and TOXIC services. The following materials shall be purchased to NACE MR0103: (Note EPC Contractor to confirm and develop) All CS and LTCS material designated ‘LSS’. Stainless Steel type 316, 321, 347, 321/347. 1.25% Chrome 0.5% Moly. 2.25% Chrome 1.0% Moly. UNS S32760 Duplex Stainless Steel. Alloy 20 All valves in piping classes which include wet or dry H2S (50-3000 ppmw), or TOXIC (> 3000 ppmw), shall have soft seats/seals/packing etc. suitable for the specified services. Supplier to provide details at the bid stage. Pressure and temperatures have been fully rated for the class 150 and 300 classes except for sizes above 24”. Piping Class Numbers have been given a suffix ‘R’ to signify they are being developed for the Ruwais Refinery Expansion Project. New Piping Classes will utilize existing numbers for a similar service with the addition of suffix ‘MR’, e.g. 33020MR.


PIPING CLASS INDEX

TAKREER

PROJECT No 5578




Rev.5


of 43

Note that piping classes shall be to the requirements of ASME B31.3 unless otherwise stated. For additional material requirements see Piping Material Purchase Specification (SPE Specs) 25418-1000-3PS-P000-P0016. The following services have not been allocated piping classes. Contractor to investigate if required and develop at the EPC stage.

Breathing Air BGA

Piping Classes for High Severe Service (HSS)

Bolting not meeting the requirements of Section 5 and Table 8 of MR0103 shall only be used on flanges or other parts that are not directly exposed to ‘Wet H2S / SOUR’ environments, and must be directly exposed to the atmosphere at all times (see Paragraph 5.2.1.1 of MR0103). Flanges and Gaskets above those specified in ASME B16.47 for series ‘A’ (see below) shall be designed by the EPC Contractor:

> 60” NPS Class 150 – 600 >48” NPS Class 900 > 24” NPS Class 1500 - 2500

All CR (Neoprene) gaskets shall be suitable for 87°C minimum Design Temperature. Supplier to confirm at the bid stage.

5. PIPING CLASS INDEX

See following pages.

TECHNICAL SPECIFICATION FOR PIPING SYSTEMS COMPANY Doc. No. 5578-DGS-PU-020 ENG Doc. 25418-1000-3PS-P000-P0020 Rev 5 Date 29 April 2009 of 43

LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE

INTERNAL BOLTS GASKETS

MAX. PRESS

(kg/cm2 GA)

TEMP

RANGE (°C) PWHT SERVICE

SERVICE

CODE

Service Air UA

11020MR 3 150 RF Carbon Steel, A106-B

410 B7 316L/Graph SPW

ASME B16.5 5 to 65

(145 transient)

Dry Process Air UOP (MS-1)

DA

Lean Amine, P

Amine Drain, AD

Lean Amine w/ H2S P

11025XR 3 150 RF Carbon Steel, A106-B LSS

410 NACE

B7 316L/Graph SPW

ASME B16.5 minus 15 to 200 Yes

(H2S < 50 ppm) (LSS)



ASME B16.5 265 Combustion Air PA

Hydrogen, HY

Hydrocarbons w/ WET H2S, P

Hydrocarbons w/ H2 (pp > 7.1 kg/cm2 )

P

11050MR 3 150 RF Carbon Steel, A106-B LSS

316 & Stellite NACE

B7M 316L/Graph SPW

ASME B16.5 (And as per API

941)

minus 15 to 370 *

Fuel Gas (LSS, 50 - 3000 ppm H2S) (UOP B1A2) * PWHT for UOP units only

FG

11050XR 3.2 150 RF Carbon Steel, A106-B

Assigned to UOP for line class PR-30 UOP – Not Used

11051HR 3 150 RF Carbon Steel, A106-B

Not Used Not Used

Hydrocarbons w/ H2S P

LPG w/ H2S P

LPG P

High Pressure Flare HF

Low Pressure Flare LF

11051LR 3 150 RF Carbon Steel, A106-B TOXIC


ASME B16.5 minus 15 to 200

(TOXIC, H2S > 3000 ppm)

11051MR 3 150 RF Carbon Steel, A106-B TOXIC


ASME B16.5 201 to 400

Max 425 uninsulated Max 400 insulated

Hydrocarbons w/ H2S (TOXIC, H2S > 3000 ppm)

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrocarbons, P

Hydrocarbons w/ H2S (H2S < 3000 ppm),

P

Hydrocarbons w/ H2 (pp < 7.1 kg/cm2 ), Hydrocarbons w/ Caustic / Amine Process Water * PWHT for Caustic & Amine service only SR/Cracked Slops

P P

PW P

Methanol-General Chemicals, CH

Closed Chemical Sewer, CC

Acid Sewer, CY

Flushing Oil, FL

Refinery Fuel Oil, FO

Fuel Gas, FG

Dry Process Air, Service Air

DA UA

Process Service Air, PA

Instrument Air (Dew Point: minus 20 degC or lower.),

IA

Hydrocarbon Drain, HD

Vent Gas Atmospheric, VA

11051XR 3 150 RF Carbon Steel, A106-B


ASME B16.5 ##

12 kg/cm2 @ 196°C only

minus 15 to 265

$$ Foaming Solution =

87 DRY 48 FLOWING

##

*

Nitrogen $$ Foaming Solution ## Fresh Cooling Water Supply ## Fresh Cooling Water Return Max conditions as noted

UN FS

FCWS FCWR

Hydrocarbons, P Hydrocarbons w/ H2S (H2S < 3000 ppm),

P

Hydrocarbons w/ H2 (pp < 7.1 kg/cm2), Hydrocarbons w/ Caustic / Amine

P P

Vent Gas Atmospheric VA Process Service Air DSO + Caustic

PA P

11051YR

3 150 RF Carbon Steel, A106-B


ASME B16.5 201 to 400 Max 425 uninsulated Max 400 insulated (435 for 1 hour every 4 years-Shaw)

*

Heavy Slops *PWHT for Caustic/ Amine Service Only

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrogen (up to 100%) HY Hydrocarbons w/ H2 (pp > 7.1 kg/cm2)

P 11052MR 3 150 RF Carbon Steel,

A106-B 316 & Stellite B7 316L/Graph

SPW ASME B16.5

(And as per API 941)

minus 15 to 370

UOP (B1A2) Lummus

Hydrogen, HY


Hydrocarbons w/ H2 (pp > 7.1 kg/cm2)

P


LSS/TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 370 *

Process Water (LSS/TOXIC, H2S > 3000 ppm) UOP (B1A2) * PWHT For UOP Units only

PW



ASME B16.5 minus 15 to 200 LPG P


Hydrocarbons w/ H2 (pp < 7.1 kg/cm2)

P

Sour Water, WA

Sour Water Drain WAD


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 201 to 400 *

* PWHT where shown on P&ID/LDT (LSS/TOXIC, H2S > 3000 ppm)


Hydrocarbons w/ H2 (pp < 7.1 kg/cm2),

P

Sour Water, WA

Sour Water Drain WAD

11055YR 6 150 RF Carbon Steel, A106-B

LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 minus 15 to 200 *

Process Water * PWHT where shown on P&ID/LDT (LSS/TOXIC, H2S > 3000 ppm)

PW


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

11058MR

6 150 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5

minus 15 to 255 * Hydrocarbons w/ WET H2S, Hydrocarbons w/ H2 (pp > 7.1 kg/cm2) Process Water * PWHT where shown on P&ID/LDT (LSS, H2S 50-3000 ppm)

P P

PW

Hydrogen Hydrocarbons w/ H2 (pp > 7.1 kg/cm2)

HY P


316 & Stellite B7 316L/Graph SPW


941)

minus 15 to 370

(UOP B1A4)


P

Hydrocarbons w/ WET H2S Sour Water Process Water

P WA PW

11060YR 6 150 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW


* PWHT where shown on P&ID/LDT. (LSS 50 - 3000 ppm H2S)



ASME B16.5

201 to 400

Max 425 uninsulated Max 400 insulated (445 for 1 hour every 4 years – Shaw)

Catalyst with/ without hydrocarbons

CT

11070YR 3.2 150 RF Carbon Steel, A106-B

Assigned to UOP for line class B1A1 UOP – Not Used

11125XR - 150 RF Carbon Steel, A106-B



LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

11125YR - 150 RF Carbon Steel, A106-B


11125ZR - 150 RF Carbon Steel, A106-B


Hydrocarbons w/ WET H2S P Amine w/ WET H2S, P Fuel Gas, Hydrocarbon Drain Tail Gas

FG HD TG

Process Water, PW Waste Water, WW Natural Gas NG


316 NACE

B7M 316L/Graph SPW


LSS 50 - 3000 ppm H2S) *PWHT for Amine / Caustic Service & for UOP Units only. (UOP B1A2)

Hydrocarbons w/ WET H2S, P Amine Drain, AD Sour Water, WA Amine w/ WET H2S, P Acid Gas Flare AF Tail Gas TG Cracked Slops *PWHT for Amine Service and where shown on P&ID/LDT

P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


(LSS/TOXIC, H2S > 3000 ppm)

11126ZR - 150 RF Carbon Steel, A106-B


Hydrocarbons w/ WET H2S, P Acid Gas Flare AF


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 201 to 400 Max 425 uninsulated Max 400 insulated

*

Sour Water (LSS/TOXIC, H2S > 3000 ppm) * PWHT is required where shown on P&ID/LDT

WA


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

11127ZR 3 150 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW


Hydrocarbons w/ WET H2S (LSS, 50 - 3000 ppm H2S)

P

Sour Water, WA Amine w/ WET H2S, P Fuel Gas, FG Process Water, PW Waste Water, WW Hydrocarbons w/ WET H2S P


Monel 400 & Stellite NACE

B7M Monel 400 /Graph SPW

ASME B16.5

minus 15 to 200 *

LSS 50 - 3000 ppm H2S) *PWHT for Amine Service & for UOP Units only. (UOP B1A2)

11156MR 3 150 RF Low Temp Carbon Steel

A333-6 LT-50

316 L7 316L/Graph SPW

ASME B16.5 minus 50 to 200 LPG w/ H2 (pp > 7.1 kg/cm2) P

Process Water PW 11170MR 3 150 RF Low Temp Carbon Steel

A333-6 LT-50


ASME B16.5 201 to 371 (340 max for castings)

Min. temp minus 50

Waste Water

WW

LPG w/ H2 (pp < 7.1 kg/cm2),

FG

LPG with HCL trace, CY


A333-6 LT-50


ASME B16.5 201 to 371 (340 max for castings)

Min. temp minus 50

Acid Sewer Propylene

CY P

LPG, P LPG w/ WET H2S, P LPG w/ H2

(pp < 7.1 kg/cm2), FG

Propane, P Blowdown, BD High Pressure Flare, HF Low Pressure Flare LF

11174XR 3 150 RF Low Temp Carbon Steel

A333-6 LT-50 LSS

316 NACE

L7M 316L/Graph SPW


(LSS, 50 - 3000 ppm H2S)


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE


A333-6 LT-50


ASME B16.5 minus 50 to 200 Process Water (w/H2S < 50ppm)

PW

LP Flare Header LF HP Flare Header Hydrocarbons w/wet H2S

HF P


A333-6 LT-50

LSS/TOXIC

316 NACE

L7M 316L/Graph SPW

ASME B16.5 minus 50 to 400 (340 max for castings)


11185MR 4.5 150 RF Low Temp Carbon Steel

A333-6 LT-50

LSS/TOXIC

316 NACE L7M 316L/Graph SPW

ASME B16.5 minus 50 to 315 * Hydrocarbons w/ WET H2S, Sour Water Amine w/Wet H2S Acid Gas Flare

P WA P AF

* PWHT for Amine Service and where shown on P&ID/LDT (LSS/TOXIC, H2S > 3000 ppm)

Fresh Cooling Water Supply (Aboveground),

FCWS

Fresh Cooling Water Return (Aboveground), Accidental Oily Water Sewer (AG) Sludge Concentrate (AG) Oily Sewer (AG) Treated Waste Water (AG)

FCWR

AY

TY SY

TWW

Utility Water (Aboveground) UW

11210R 3 150 RF Carbon Steel, A106-B


15

(15.5 for Accidental Oily Water Sewer (AY) & Oily Sewer (SY)

only.)

5 to 87

UOP (MS-1)

Fresh Cooling Water Supply FCWS 11210MR 3 150 RF Carbon Steel, A106-B


18.8 75

Fresh Cooling Water Return

FCWR


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

L.P. Steam, LS

Treated Condensate TC

Vent Gas Atmospheric VA

L.P. Steam Condensate, LC

L.P. Boiler Feedwater, LBW

Recovered Condensate RC

Boiler Water Blowdown BA

Air, Nitrogen, Steam P



ASME B16.5 5 to 400 Max 425 uninsulated Max 400 insulated (UOP max 370)

Pure Condensate UOP (MS-11)

PC

Caustic (NaOH), Fresh

FC

Caustic (NaOH), Spent SC Caustic w/Amine SC



ASME B16.5 5 to 87 (max operating 295

transient RV)

Yes

10% Concentration (87°C Max.) 50% Max. Concentration (45°C Max.) UOP (B1A2)

Caustic (NaOH), Fresh 15% Concentration

FC 11372XR 3 150 RF Carbon Steel, A106-B

Monel 400 B7 Monel 400 /Graph SPW


Caustic (NaOH), Spent 15% Concentration

SC


Alloy 20 Valves & trim

B7 PTFE Envelope

ASME B16.5 minus 15 to 200 Hydrocarbons / H2S04 (Up to 99.2 wt %)

CH



NACE

B7M PTFE Envelope

ASME B16.5 minus 15 to 200 Hydrocarbons / H2S04 (Up to 99.2 wt %) w/ WET H2S Including Reactor & Settler Emulsion Lines) (LSS H2S 50-3000 ppm)

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE



NACE

B7M PTFE Envelope

ASME B16.5 minus 15 to 200 H2S04 (Up to 99.2 wt %) (Start-up & Shutdown, Drain & Neutralization Lines) w/ WET H2S (LSS H2S 50-3000 ppm)

CH

11845HR 4.5 150 RF Carbon Steel, A106-B SOUR

Not Used Not Used

11845LR 4.5 150 RF Carbon Steel, A106-B SOUR

Not Used Not Used

Warm Flare LF 11845MR 3 150 RF Carbon Steel, A106-B


ASME B16.5 minus 15 to 260 Lummus Requirement.


Sour Water, WA

Low Pressure Flare LF

11845R 4.5 150 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW


(LSS, 50 - 3000 ppm H2S)


Sour Water WA

Amine w/ WET H2S, P

Acid Gas Flare AF


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


*

*PWHT for Amine Service only. (LSS/TOXIC, H2S > 3000 ppm)


Sour Water, WA

Acid Gas Flare AF

Amine w/ WET H2S, P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


*PWHT for Amine Service and where shown on P&ID/LDT (LSS/TOXIC, H2S > 3000 ppm)


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrogen HY


Hydrocarbons w/ H2

(pp > 7.1 kg/cm2) P

Sour Water, WA

Low Pressure Flare (LSS, 50 - 3000 ppm H2S)

LF

11848MR 4.5 150 RF Carbon Steel, A106-B LSS

316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 370

*

UOP (B1A3) * PWHT for UOP Units Only




Hydrocarbons w/ H2S, Process Water Utility Water (0 - 3000 ppm H2S)

P PW UW

Hydrocarbons, P


P

12050R 3 150 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 450 410 max. op.

Yes


P

Hydrocarbons P 12055MR 1.5 150 RF 1 1/4 CR – 1/2 MO

410 & Stellite EN 10269 CrMoV TiB4-10

316L/Graph SPW

ASME B16.5 Minus 15 to 538 Yes

Regen Gas

P

12060MR 3 150 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 400 Yes HCO/Slurry Service P

12065MR 6 150 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 400 Yes Slurry Service P

Hydrocarbons, P


P

12070R 3 150 RF 9 CR – 1 MO 410 B16 316L/Graph SPW


Hydrocarbons w/ H2

(pp < 7.1 kg/cm2) P


P 12070XR 4.5 150 RF 9 CR – 1 MO 410 B16 316L/Graph

SPW ASME B16.5 minus 15 to 410 Yes


P

12075MR 6 150 RF 9 CR – 1 MO 410 B16 316L/Graph SPW

ASME B16.5 minus 15 to 425 Yes Hydrocarbons

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Cold Flare, CF 13010MR 0 150 RF 316/316L SS 316 B8M CL2

316L/Graph SPW

ASME B16.5 minus 196 to +200 Cold Blowdown

CBD

13015MR 0 150 RF 316/316L SS 316 B7 316L/Graph SPW

ASME B16.5 5 to 100 Instrument Air (Not Dewpointed)

IA

13020MR 0 150 RF 316/316L SS 316 B8M CL2

316L/Graph SPW

ASME B16.5 minus 170 to +200 Hydrocarbons w/ H2 (pp > 7.1 kg/cm2)

P

13020XR 0 150 RF 316/316L SS SOUR / TOXIC

316 (NACE)

B7M 316L/Graph SPW

ASME B16.5 minus 15 to 200 Hydrocarbons w/ WET H2S (SOUR/TOXIC, H2S > 3000 ppm)

P

Hydrocarbons w/ H2S (H2S <3000 ppm),

P 13030R 0 150 RF 316/316L SS 316 B7 316L/Graph SPW

ASME B16.5 0 to 200

Pure Condensate

PC

Corrosive Process P Demineralized Water WD

13030XR 1.5

150 RF 316/316L SS 316 & Stellite B7 316L/Graph SPW


(UOP M1A1/N1A1)

13030ZR 0 Tubing 316 SS Assigned to UOP for line class MS-7 UOP Instrumentation Tubing Not Used

Hydrocarbons w/ WET H2S, P 13035XR 0 150 RF 316/316L SS SOUR

316 & Stellite (NACE)

B7M 316L/Graph SPW


(UOP max 370)

Fuel Gas, (SOUR, 50 - 3000 ppm H2S) (UOP N1A1)

FG


Acid Gas

P

(SOUR/TOXIC, H2S > 3000 ppm)

13035YR 0 150 RF 316/316L SS SOUR / TOXIC

316 (NACE)

B7M 316L/Graph SPW



LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

13035ZR 0 150 RF 316/316L SS Not Used Not Used

Sour Water

WA 13040YR 0 150 RF 316/316L SS SOUR / TOXIC


L7M

316L/Graph SPW


(UOP max 370)

UOP (N2A1) Hydrocarbons w/ WET H2S (SOUR/TOXIC, H2S > 3000 ppm)

P

13040ZR 0 150 RF 316/316L SS SOUR

316 (NACE)

L7M 316L/Graph SPW

ASME B16.5 minus 60 to 400 Hydrocarbons w/ WET H2S (SOUR 50 - 3000 ppm H2S)

P

13045XR - 150 RF 304 SS Assigned to UOP for line class PR-11 UOP – Not Used

13090YR 1.6 150 RF 304 SS Assigned to UOP for line class K1A1 UOP – Not Used

Demineralized Water WD

Distilled Water MW

Foaming Liquid FI

Caustic Fresh FC

Caustic Spent SC

13091XR 0 150 RF 316/316L SS 316 B7 316L/Graph SPW

ASME B16.5 0 to 290

Lube Oil Fresh Water Desalinated

LO TW

13091YR 1.5 150 RF 304L SS Assigned to UOP for line class L1A1 UOP – Not Used

Chemical Injection CH

DMDS

13095MR 0 150 RF 316/316L SS (Pipe & Tubing)


ASME B16.5 150

Chemical Injection APS CH

Carbon Tetrachloride (C2Cl4) Carbon Tetrachloride (C2Cl4) + N2

P P


ASME B16.5 150

13205MR 0 150 RF 25Cr Duplex Stainless Steel

S32760 SOUR

25Cr Duplex Stainless Steel

S32760 NACE

B7M 25Cr Duplex SS/Graph SPW

ASME B16.5 0 to 150 Sour Water (Sour H2S 50-3000 ppm)


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

13610MR 3 150 RF 316/316L SS Alloy 20 Valves & trim

B7 1/8” thk Garlock

Gylon Fawn

ASME B16.5 Minus 15 to 165 Fresh & Spent H2S04 (Up to 99.2 wt %) (Continuously operating) Oleum

CH

CH

13615MR 3 150 RF 316/316L SS SOUR


(NACE)

B7M 1/8” thk Garlock

Gylon Fawn

ASME B16.5 Minus 15 to 165 Fresh & Spent H2S04 (Up to 99.2 wt %) (Continuously operating) (SOUR H2S 50-3000 ppm)

CH

13690MR 0 150 RF ZECOR Alloy 20 / 310 Valves & trim


Gylon 3540

8.8 Minus 15 to 137 H2S04 (97-99 wt %) Instrument Air Acid Vent

CH IA CH

13695MR 0 150 RF ZECOR Alloy 20 Valves & trim


Gylon 3540

8.8 Minus 15 to 118 H2S04 (93-96.9 wt %) Instrument Air Acid Vent

CH IA CH


Not Used

15050MR 0.8 150 RF Monel 400 B165

Monel 400

B7

Monel 400 /Graph SPW


LPG w/ H2 (pp > 7.1 kg/cm2)

P

15055YR 1.6 150 RF Monel

Assigned to UOP for line class R1A1 UOP – Not Used

16010MR 3 150 RF Alloy 20 Alloy 20 Valves & trim

B8M CL2

PTFE Envelope


Corrosive Hydrocarbons / Water / H2S04 (Up to 99.2 wt %)

FC PW SC CH

16015MR 3 150 RF Alloy 20 SOUR


(NACE)

B8MA PTFE Envelope


Corrosive Hydrocarbons / Water / H2S04 (Up to 99.2 wt %) (SOUR H2S 50-3000 ppm)

P CH

16510MR 2 150 RF Hastelloy C Hastelloy C B8M CL2

PTFE Envelope


Corrosive Net Effluent & Hot Alkaline Water upstream of Net Effluent/Alkaline Water Mixer

FC SC P

Demineralized Water (UG) WD

Fresh Water Desalinated TW

17040XR 0 150 FF Epoxy GRE (Adhesive

Bonded Joint)

316/ CR-Lined

Steel

B7 RPTFE W/Silica Filler

10 0 to 100

Distilled Water (UG) MW


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

150 RF 316/316L SS 1/2” – 2”

316 CR (NEOPRENE)

17050R 0

150 FF

Epoxy GRE (Key Lock

Joint) 3”– 16”

Brass/CR-Lined Steel

B7

CR

(NEOPRENE)

10 0 to 40 Drinking Water (AG/UG) UOP (MS-2)

DW

Seawater Supply (AG/UG) SWS

Seawater Return (AG/UG) SWR

Fresh Cooling Water Supply UG FCWS

Fresh Cooling Water Return UG FCWR

Utility Water (AG/UG) UW

Sanitary Sewer (UG) NY

Non-Oily Sewer (UG) WY

Oily Sewer (UG) SY

Accidental Oily Water Sewer (UG)

AY

Treated Wastewater (UG) TWW

17090R 0 150 FF Epoxy GRE / GRVE (1”-16 “ Adhesive Bonded Joint 20” & up Laminated Joint)

GRV/Brass/PTFE-Lined

Steel

B7 FKM (Viton A)

15 0 to 87

Sludge Concentrate (UG)

TY

17112MR 0 150 FF GRVE PP / TFE Lined

A307-B 1/8” thk Butyl Rubber

5.3 10.0

82 65

H2S04 (2-30 wt %) Process Air Process Gas Utility Water Weak Acid

CH

PA P

UW CH

17150R 0 150 RF Titanium Titanium B7 Titanium / Graph SPW

10 87 Chlorine Injection

CH

17155MR 0 150 FF CPVC PTFE A307-B 1/8” thk Butyl Rubber

6.4 kg/cm2 2” and below

HOLD

87 HOLD

Sulphuric Acid (2-30%) Weak Acid Vent Utility Water

CH CH UW

Carbon Steel API 5L-B Galv

1/2" - 3"

18010MR 3 150 RF

A106 B Galv 4" - 12"

Brass / 316 B7 CR (NEOPRENE)

15.5 5 to 48

(87 Dry, 48 Flowing)

Foaming Solution FS


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

18010R 3 150 RF Carbon Steel API 5L-B A106 B

8" - 12"Galv 1/2" - 6"

Not Used Not Used


Not Used Not Used

Firewater – Fresh (Aboveground)

FW 18100XR 3 150 RF Carbon Steel, A106-B

410 / 316 / B148/ Rubber-

Lined

B7 CR (NEOPREN

E)

16 5 to 87

Firewater – Fresh (Underground)

FW


Not Used Not Used

18160MR 0 150 RF C.S. PTFE Lined


A307-B 1/8” thk Garlock

Gylon 3540

ASME B16.5

Minus 15 to 110 H2S04 Demin Water

CH

WD

Lean Amine w/ H2S P 31025MR 3 300 RF Carbon Steel, A106-B LSS

410 & Stellite NACE

B7M 316L/Graph SPW


941)

201 to 400


*

Hydrocarbons w/ H2 (pp > 7.1 kg/cm2) *PWHT for Amine Service only (LSS, H2S < 50 ppm) UOP (B2A2)

P

Lean Amine, P 31025XR 3 300 RF Carbon Steel, A106-B LSS

410/316 NACE

B7 316L/Graph SPW


Lean Amine w/ H2S (LSS, H2S < 50 ppm)

P


410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 minus 15 to 200 Yes Lean Amine w/ WET H2S (LSS 50 - 3000 ppm H2S)

P

Hydrocarbons w/ H2S P

LPG w/ H2S P

LPG P

LPG w/Amine P

(TOXIC, H2S > 3000 ppm)




*PWHT for Amine Service only



ASME B16.5 minus 15 to 350 High Pressure Flare HF


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrocarbons, P


P

Hydrocarbons w/ H2 (pp < 7.1 kg/cm2),

P

Natural Gas, NG

Tail Gas, TG

Desalter Water, P

Process with H2 P

Flushing Oil FL




Process Water Cracked Slops * PWHT is required where shown on P&ID/LDT

PW P


P 31051YR 3 300 RF Carbon Steel,

A106-B 410 B7 316L/Graph

SPW ASME B16.5 201 to 400


*

Hydrocarbons w/ H2 (pp < 7.1 kg/cm2) Process Water Heavy Slops * PWHT where shown on P&ID/LDT

P

PW P

31051ZR 3 300 RF Carbon Steel, A106-B




ASME B16.5

265 Combustion Air PA

31055YR 3 300 RF Low Temp Carbon Steel

A333-6 LT-50 LSS

316 NACE

L7M 316L/Graph SPW

ASME B16.5 minus 50 to 100 Hydrocarbons w/ WET H2S (LSS, 50-3000 ppm H2S)

P

Hydrogen, HY 31056MR 3 300 RF Carbon Steel, A106-B



941)

minus 15 to 400


*

Hydrocarbons w/ H2 (pp > 7.1 kg/cm2) Cracked Slops UOP (B2A2) * PWHT where shown on P&ID/LDT

P P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrogen, HY 31056R 3 300 RF Carbon Steel, A106-B




P



ASME B16.5 minus 15 to 260 Hydrogen (Pure) Lummus Requirement.

HY

UOP (B2A4)

Hydrocarbons w/ WET H2S, P Hydrocarbons with H2

(pp > 7.1 kg/cm2) P


316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

Process Water (LSS, 50-3000 ppm H2S) * PWHT for UOP Units only & where shown on P&ID/LDT

PW



ASME B16.5 201 to 400


Catalyst with/ without hydrocarbons

CT





941)

Minus 15 to 400


* Hydrocarbons w/ WET H2S Hydrocarbons w/ H2 (pp > 7.1 kg/cm2), (LSS, H2S 50-3000 ppm) UOP (B2A4) * PWHT for UOP Units only

P P


Hydrocarbons w/ H2 (pp > 7.1 kg/cm2),

P

LPG with H2S, P

Amine (LSS/TOXIC, > 3000 ppm H2S) UOP (B2A2)

P


LSS/TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

* PWHT for UOP Units only, Amine Service & where shown on P&ID/LDT


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrogen, HY Hydrocarbons w/ WET H2S, P Hydrocarbons w/ H2 (pp > 7.1 kg/cm2),

P

LPG with H2S, P Amine P


316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

(LSS, 50-3000 ppm H2S) UOP (B2A2) * PWHT for UOP Units only, Amine Service & where shown on P&ID/LDT

Hydrogen HY Hydrocarbons w/ WET H2S, P Hydrocarbons w/ H2 (pp > 7.1 kg/cm2),

P

LPG with H2S, Fuel Gas

P FG

Amine P





941)

minus 15 to 400


PWHT for UOP Units Only

(LSS, 50-3000 ppm H2S) UOP (B2A2)

31125YR - 300 RF Carbon Steel, A106-B



Sour Water, WA


410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 minus 15-200 *

Amine w/ WET H2S SR Slops *PWHT for Amine Service only & where shown on P&ID/LDT. LSS 50 - 3000 ppm H2S)

P P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE


Sour Water, WA Amine w/ WET H2S

P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


*PWHT for Amine Service only & where shown on P&ID/LDT. (LSS/TOXIC, H2S > 3000 ppm)


Sour Water, WA

31126ZR 3 300 RF Carbon Steel, A106-B

LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


Amine w/ WET H2S *PWHT for Amine Service only. (LSS/TOXIC, H2S > 3000 ppm)

P

LPG w/ H2S, P 31127XR 3 300 RF Carbon Steel, A106-B LSS

410/316 NACE

B7 316L/Graph SPW

ASME B16.5 minus 15 to 200 * LPG w/Amine * PWHT for Amine Service only (LSS < 3000 ppm H2S)

P

Hydrocarbons w/ WET H2S P

Sour Water WA


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


Amine w/ WET H2S * PWHT for Amine Service only (LSS/TOXIC, H2S > 3000 ppm)

P

31127ZR 3 300 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 minus 15 to 380 * Hydrocarbons w/ WET H2S Amine * PWHT for Amine Service only (LSS 50 - 3000 ppm H2S)

P P

Hydrogen HY 31156MR 3 300 RF Low Temp Carbon Steel

A333-6 LT-50



LPG w/ H2 (pp > 7.1 kg/cm2) P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrogen

HY 31160MR 3 300 RF Low Temp Carbon Steel

A333-6 LT-50



941)

201 to 371 340 max castings

LPG w/ H2 (pp > 7.1 kg/cm2) P

LPG w/ H2 (pp < 7.1 kg/cm2) P



A333-6 LT-50



(340 max castings) (72 max caustic)

*

LPG w/ Caustic Blowdown Process Water Hydrocarbons w/Caustic (up to 12 wt %) *PWHT for Caustic Service & where shown on P&ID/LDT

P BD P PW

LPG, P


LPG w/ WET H2S, P

Propane P

31174XR 3 300 RF Low Temp Carbon Steel

A333-6 LT-50 LSS

316 NACE

L7M 316L/Graph SPW


(LSS, 50-3000 ppm H2S)

LPG w/ H2S (<50 ppm H2S) P 31175MR 6 300 RF Low Temp Carbon Steel

A333-6 LT-50



Process Water PW

LPG w/ WET H2S (<50 ppm H2S)

P

LPG w/ WET H2S + Caustic (<50 ppm H2S)

P


A333-6 LT-50


ASME B16.5 201 to 371

(340 max castings) (Caustic max op 43)

*

Process Water * PWHT for Caustic Service only

PW


A333-6 LT-50

LSS/TOXIC

316 NACE

L7M 316L/Graph SPW

ASME B16.5 minus 50 to 400 (340 max for castings)

LP Flare Header HP Flare Header Hydrocarbons w/wet H2S (LSS/TOXIC, H2S > 3000 ppm)

LF HF P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Fresh Cooling Water Supply (Above Ground)

FCWS

Fresh Cooling Water Return (Above Ground)

FCWR

Process Water PW



ASME B16.5 (5 to 87 max op)

(265 design)

Phosphate Dosing Shaw requirement

CH


410 PTFE Sleeved

B7 316L/Graph SPW

ASME B16.5 140-180 Liquid Sulphur P

M.P. Steam, MS

M.P. Condensate MC

Treated Condensate TC

M.P. Boiler Feedwater MBW

LP Steam LS


410 & Stellite B7 5 to 400


LP Condensate UOP (MS-12)

LC

Caustic (NaOH), Fresh FC

Caustic (NaOH), Spent 10% Concentration (87°C Max.), 50% Max. Concentration (45°C Max.)

SC



ASME B16.5 5 to 87 max op

(295 RV design)

Yes

Caustic w/Amine UOP (B2A2)

SC

31370YR 300 RF Carbon Steel, A106-B




B7 PTFE Envelope

ASME B16.5 minus 15 to 200 * Hydrocarbons / H2S04 (Up to 99.2 wt %) Hydrocarbons w/Caustic (Up to 12 wt %) * PWHT for Caustic Service only

P P FC


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE



B7 PTFE Envelope

ASME B16.5 minus 15 to 200 H2S04 (Up to 99.2 wt %) (Start-up & Shutdown, Drain & Neutralizing Lines)

CH

Hydrocarbons w/ WET H2S, P 31845MR 6 300 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW


Sour Water Process Water (LSS, 50 - 3000 ppm H2S)

WA PW

Hydrocarbons w/ WET H2S, P 31845R 4.5 300 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW


Sour Water (LSS, 50 - 3000 ppm H2S)

WA

Hydrocarbons w/ WET H2S, P 31845XR 4.5 300 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 201 to 400


*

Sour Water Amine (LSS, 50 - 3000 ppm H2S) * PWHT for Amine Service only

WA P


Sour Water, WA

Acid Gas Flare AF

Acid Gas P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW





ASME B16.5 minus 15 to 240 * Hydrocarbons w/ H2S (0 - 3000 ppm H2S) Process Water * PWHT is required where shown on P&ID/LDT

P PW


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


941)

201 to 400


* Hydrocarbons w/ WET H2S Hydrocarbons w/ WET H2S & Amine Hydrocarbons w/ H2 (pp >7.1 kg/cm2) (LSS/TOXIC, H2S > 3000 ppm) * PWHT for Amine service & where shown on P&ID/LDT

P P P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW

ASME B16.5 minus 15 to 200 * Hydrocarbons w/ WET H2S Hydrocarbons w/ WET H2S & Amine (LSS/TOXIC, H2S > 3000 ppm) * PWHT for Amine service & where shown on P&ID/LDT

P P

Hydrocarbons w/ H2S, P 32050R 3 300 RF 5 CR - 1/2 MO

TOXIC



Hydrocarbons w/ H2 (pp<7.1 kg/cm2) (TOXIC, H2S > 3000ppm)

P

32055MR 3 300 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 425 Yes Hydrocarbons

P

32060MR 3 300 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 370 Yes HCO/Slurry Service Heavy Slops

P P

32065MR 6 300 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 400 Yes HCO/Slurry Service

P

Hydrocarbons, P


P




P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE


P 32070XR 4.5 300 RF 9 CR – 1 MO 410 B16 316L/Graph

SPW ASME B16.5 minus 15 to 450 Yes


P

32075MR 6 300 RF 9 CR – 1 MO 410 B16 316L/Graph SPW

ASME B16.5 minus 15 to 425 Yes Hydrocarbons MP Steam

P MS

32080MR 1.5 300 RF 1 1/4 CR – 1/2 MO

410 & Stellite B408 N08811

347/Mica & Graph SPW

ASME B16.5 minus 15 to 593 Yes Hydrocarbons Lummus requirement

P

Hydrogen HY

Hydrocarbons w/ H2

(pp > 7.1 kg/cm2) Hydrocarbons w/ H2S (H2S < 50 ppm),

P P

32085MR 1.5 300 RF 1 1/4 CR – 1/2 MO


ASME B16.5 (and as per API

941)

minus 15 to 482 Yes

32120XR 3.2 300 RF 1 1/4 CR – 1/2 MO


UOP (E2A2) Hydrocarbons w/WET H2S (SOUR/TOXIC > 3000 ppm H2S)

P

32120YR 3 300 RF 1 1/4 CR – 1/2 MO SOUR / TOXIC


B7M 316L/Graph SPW


941)

minus 15 to 375 Yes

Hydrocarbons w/ H2

(pp > 7.1 kg/cm2)

P

UOP (E2A3) Hydrocarbons w/WET H2S (SOUR 50 - 3000 ppm H2S)

P

32125MR 4.5 300 RF 1 1/4 CR – 1/2 MO SOUR


B7M 316L/Graph SPW


941)

minus 15 to 375 Yes

Hydrocarbons w/ H2

(pp > 7.1 kg/cm2)

P

Refrigeration C3 Hydrocarbons P

Cold Liquid Drain P

Cold Flare CF

Cold Blowdown CBD

33010MR 0 300 RF 316/316L SS 316 B8M CL2

316L/Graph SPW

ASME B16.5 minus 150 to +204

Lummus requirement


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

33015MR 0 300 RF 316/316L SS


ASME B16.5 5 to 65 Instrument Air

IA

33020MR 0 300 RF 316/316L SS

316 B8M CL2

316L/Graph SPW

ASME B16.5 minus 170 to +200 Hydrocarbons w/ H2 (pp up to 8.5 kg/cm2)

P

33020XR 0 300 RF 316/316L SS


ASME B16.5 minus 50 to +200 Hydrocarbons

P

33025XR 0 300 RF 316/316L SS 316 & Stellite B7 316L/Graph SPW


UOP (M2A1) Corrosive Process

P


P

Pure Condensate, PC Catalyst, CT

33030R 0 300 RF 316/316L SS 316

B7 316L/Graph SPW


Process Water

PW

Hydrocarbons w/ WET H2S P 33035MR 0 300 RF 316/316L SS SOUR / TOXIC

316 (NACE)

B7M 316L/Graph SPW

ASME B16.5 201 to 400


Sour Water w/H2 (pp < 7.1kg/cm2) Amine (SOUR/TOXIC, H2S > 3000 ppm)

WA P

Hydrocarbons w/ WET H2S, (SOUR/TOXIC, H2S > 3000 ppm)

P 33035YR 0 300 RF 316/316L SS SOUR / TOXIC


B7M 316L/Graph SPW


UOP (N2A1)

33035ZR 0 300 RF 316/316L SS SOUR / TOXIC

316 (NACE)

B7M 316L/Graph SPW

ASME B16.5 minus 15 to 200 Hydrocarbons w/ WET H2S, (SOUR/TOXIC, H2S > 3000 ppm)

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Corrosive Service P Hydrocarbons P Amine P

33040MR 0 300 RF 316/316L SS 316 & Stellite B7 316L/Graph SPW


Recovered Condensate UOP (N2A1)

RC

33040YR 0 300 RF 316/316L SS


ASME B16.5 minus 15 to 200 Amine P

Combustion Air PA 33045MR 0 300 RF 304H SS

321 & Stellite B408 N08811


4.57 minus 15 to 760

Flue Gas FLG

33045XR 1.6 300 RF 304H SS


33045YR 1.6 300 RF 304H SS


Hydrocarbons w/ H2 (pp > 7.1 kg/cm2),

P 33050MR 1.5 300 RF 321 SS TOXIC

321 & Stellite B16 321/Graph SPW


Hydrocarbons w/ H2S (TOXIC, H2S > 3000 ppm)

P


ASME B16.5 minus 15 to 200 Hydrocarbons w/ H2 (pp > 7.1 kg/cm2),

P

33090YR 1.6 300 RF 304 SS Assigned to UOP for line class K2A1 UOP – Not Used


ASME B16.5 0 to 200 Demineralized Water Shaw requirement

WD

Carbon Tetrachloride (C2CL4) Chemical Injection (APS) Corrosion Inhibitor

P CH CH

Dry Hydrochloric Acid P


ASME B16.5 5 to87 130 (APS)

Fresh Caustic

FC


S32760


B7 25Cr Duplex SS/ Graph

SPW

ASME B16.5 0 to 150 Desalter Water P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

33610MR 3 300 RF 316/316L SS Alloy 20 Valves & trim

B7 PTFE Envelope

ASME B16.5 minus 15 to 200 Fresh & Spent H2S04 (Up to 99.2 wt %) (Continuously Operating)

CH

Regeneration, P

Nitrogen, UN

Spent Caustic

SC

35055YR 0.8

300 RF Monel 400 B165

Monel 400 B7 Monel 400 /Graph SPW

18 0 to 320

36010MR 3 300 RF Alloy 20 Alloy 20 Valves & trim

B8M CL2

PTFE Envelope

ASME B16.5 minus 15 to 200 Corrosive Hydrocarbons / Water / H2S04 (Up to 99.2 wt %)

P FC CH

36015MR 3 300 RF Alloy 20 SOUR


(NACE)

B8MA PTFE Envelope

ASME B16.5 minus 15 to 200 Corrosive Hydrocarbons / Water / H2S04 (Up to 99.2 wt %) (SOUR H2S 50-3000 ppm)

P FC CH

36080XR 1.6 300 RF Alloy 800 Assigned to UOP for line class PR-25 UOP – Not Used

36510MR 2 300 RF Hastelloy C Hastelloy C B8M CL2

PTFE Envelope

ASME B16.5 minus 15 to 200 Corrosive Net Effluent & Hot Alkaline Water upstream of Net Effluent/Alkaline Water Mixer

FC SC P


410/316 NACE

B7M 316L/Graph SPW

75 minus 15 to 200 Yes Lean Amine, w/ WET H2S LSS 50 - 3000 ppm H2S)

P

Hydrocarbons w/ H2S, P

LPG w/ H2S, P


410/316 B7 316L/Graph SPW


LPG (TOXIC, H2S > 3000 ppm)

P

61051MR 4.5 600 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW

69.4 minus 15 to 200 Desalter Water w/ WET H2S (LSS, 50 -3000 ppm H2S)

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrocarbons, P

Hydrocarbons w/ H2S (H2S<3000 ppm),

P



74 minus 15 to 200 *

Hydrocarbons w/ H2 (pp<7.1 kg/cm2) Hydrocarbons w/Caustic/Amine * PWHT for Caustic and Amine service

P P


P


P



ASME B16.5 201 to 400


*

C4 CUT Hydrocarbons w/Caustic/Amine * PWHT for Caustic and Amine service

P P



53.5 minus 15 to 200 Desalter Water,

P


Hydrocarbons w/ H2 (pp >7.1 kg/cm2)

P


316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

(LSS, 50 - 3000 ppm H2S) UOP (B4A2) * PWHT for UOP Units only

Hydrogen, HY


P




941)

minus 15 to 400


UOP (B4A2)



P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW

62 (And as per API

941)

minus 15 to 270



LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrogen, HY 61058MR 3 600 RF Carbon Steel, A106-B

Monel 400 & Stellite

B7 Monel 400 /Graph SPW


941)

minus 15 to 400


Hydrocarbons w/ H2 (pp >7.1 kg/cm2) UOP (B4A2)

P




941)

minus 15 to 400



P

Hydrocarbons w/ WET H2S, P 61076R 3 600 RF Carbon Steel, A106-B LSS

410/316 NACE

B7M 316L/Graph SPW

82 minus 15 to 200

Hydrocarbons w/H2 (pp >7.1 Kg/cm2) (LSS, 50 - 3000 ppm H2S)

P

Hydrocarbons w/ WET H2S, P Sour Water, WA Amine w/ WET H2S P


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


*PWHT for Amine Service only (LSS/TOXIC > 3000 ppm H2S)


Sour Water, WA


316 & Stellite NACE

B7M 316L/Graph SPW


Amine w/ WET H2S (LSS 50 - 3000 ppm H2S) UOP (B4A2) * PWHT for UOP Units and Amine Service only

P


Hydrocarbons w/ H2 (pp<7.1 kg/cm2),

P

Sour Water, WA


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


Amine w/ WET H2S *PWHT for Amine Service only (LSS/TOXIC > 3000 ppm H2S)

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE


Sour Water, WA





Amine w/ WET H2S (LSS 50 - 3000 ppm H2S) UOP (B4A2) * PWHT for UOP Units and Amine Service only

P

Hydrocarbons, w/ WET H2S P

Hydrocarbons w/ H2 (pp >7.1 kg/cm2),

P

Amine, P

Sour Water WA


LSS/TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

(LSS/TOXIC, H2S > 3000 ppm) UOP (B4A2) * PWHT for UOP Units only and Amine

Hydrocarbons w/ WET H2S P 61151XR 3 600 RF Carbon Steel, A106-B

LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW


Hydrocarbons w/ H2 (pp >7.1 kg/cm2) (LSS/TOXIC, H2S > 3000 ppm)

P

Hydrocarbons P

Cold Flare CF

Cold Liquid Drain P


A333-6 LT-50


ASME B16.5

minus 50 to 200

Shaw/Lummus requirement


A333-6 LT-50


50.5 minus 50 to 150 LPG P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE


A333-6 LT-50


41.8 minus 50 to 295 C4 Cut P

Fresh Cooling Water Supply (Above ground),

FCWS

Fresh Cooling Water Return (Above ground),

FCWR

Process Water Phosphate Dosing

PW CH



ASME B16.5 5 to 87

ASME B16.5 5 to 400 H.P. Steam HS M.P Steam MS H.P. Condensate HC H.P. Boiler Feedwater HBW Boiler Water Blowdown BA



UOP (MS-13)

Hydrocarbons w /WET H2S, P Hydrocarbons w/ H2 (pp >7.1 kg/cm2),

P

Sour Water WA


316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

(LSS, 50-3000 ppm H2S) UOP (B4A4) * PWHT for UOP Units only

Hydrocarbons w /WET H2S P

Sour Water, WA


LSS/TOXIC

410/316 NACE

B7M 316L/Graph SPW

58 minus 15 to 200


Hydrocarbons w /WET H2S, P


P


LSS/TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*

(LSS/TOXIC, H2S > 3000 ppm) UOP (B4A4) * PWHT for UOP Units only


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

62050MR 3 600 RF 5 CR - 1/2 MO


45.8 minus 15 to 425 Yes Hydrocarbons P

62060MR 3 600 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 360 Yes HCO/Slurry Service P

62065MR 6 600 RF 5 CR - 1/2 MO


ASME B16.5 minus 15 to 360 Yes Slurry Service P

Hydrocarbons, P

Hydrocarbons w/ H2S (H2S <3000 ppm),

P




P

ASME B16.5 minus 15 to 590 Hydrocarbons P 62176MR 1.5 600 RF 1 1/4 CR - 1/2 MO

321 & Stellite B408 N08811


Yes

Hydrocarbons w/ WET H2S (SOUR/TOXIC H2S > 3000 ppm),

P 62176R 3 600 RF 1 1/4 CR - 1/2 MO

SOUR /TOXIC


B7M 316L/Graph SPW


941)

minus 15 to 400 Yes

Hydrocarbons w/ H2 (pp >7.1 kg/cm2) UOP (E4A2)

P

UOP (E4A4)

Hydrocarbons w/ WET H2S (SOUR/TOXIC H2S > 3000 ppm H2S),

P

62176XR 6 600 RF 1 1/4 CR-1/2 MO

SOUR / TOXIC


B7M 316L/Graph SPW

72 (And as per API

941)

minus 15 to 375 Yes


P

62270MR 1.5 600 RF 2 1/4 CR-1 MO


53.5 minus 15 to 445 Yes H.P.Steam

HS

63020MR 0 600 RF 316/316L SS

316 B8M CL2

316L/Graph SPW

72 minus 104 to 65 Hydrocarbons

P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrocarbons w/ WET H2S,

P


P

63020XR 0 600 RF 316/316L SS SOUR / TOXIC

316 (NACE)

L7M 316L/Graph SPW

62 minus 50 to 200

(SOUR/TOXIC, H2S > 3000 ppm)

63040MR 0 600 RF 316/316L SS

316 & Stellite

B7 316L/Graph SPW

ASME B16.5 minus 15 to 400 MP Steam Treated Condensate Recovered Condensate Chemicals

MS TC RC CH

15.4 551-680 Regen Gas P 63045MR 0 600 RF 304H SS 304H/347 & Stellite

B408 N08811


101.2 (ASME B16.5)

minus 60 to 38 (Up to 550)

Lummus requirement

Hydrocarbons w/ WET H2S (SOUR 50 - 3000 ppm H2S),

P 63057YR 1.5 600 RF 321/347 SS SOUR

321/347 & Stellite NACE

B16 321/347 /Graph SPW


Hydrocarbons w/ H2 (pp >7.1 kg/cm2) UOP (Q4A1)

P

63060MR 1.5 600 RF 347 347 & Stellite B8M CL2

347/Graph SPW

ASME B16.5 minus 15 to 400 Hydrocarbons w/ H2 (pp >7.1 kg/cm2) UOP (Q4A1-S)

P


74 minus 15 to 200 Demulsifier

CH

Hydrocarbons C3 Refrigeration P

Cold Flare CF

Cold Blowdown CBD

63174MR 0 600 RF 316/316L SS 316 B8M CL2

316L/Graph SPW

ASME B16.5 minus 150 to +204

Cold Liquid Drain LUMMUS

P


S32760


B7 25Cr Duplex SS/ Graph

SPW

45.8 0 to 172 Desalter Water P


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE




941)

minus 15 to 400



P

Hydrocarbons, P

Hydrocarbons w/ H2S (H2S<3000 ppm),

P



105 minus 15 to 250

Hydrocarbons w/ H2 (pp<7.1 kg/cm2)

P

Hydrocarbons w/ H2 (pp >7.1 kg/cm2),

P

Hydrocarbons w/ WET H2S

P


LSS/TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW


941)

minus 15 to 400


*


Hydrocarbons w/ WET H2S (LSS/TOXIC> 3000 ppm H2S),

P


P

UOP (B5A4-S)

916HMR 6 900 RF Carbon Steel, A106-B LSS

TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW

ASME B16.5

(and as per API 941)

minus 15 to 370 *

* PWHT for UOP Units only

Hydrocarbons w/ WET H2S (SOUR/TOXIC> 3000 ppm H2S),

P 92176R 3 900 RF 1 1/4 CR - 1/2 MO

SOUR / TOXIC


B7M 316L/Graph SPW


941)

minus 15 to 375 Yes

Hydrocarbons w/ H2 (pp >7.1 kg/cm2) UOP (E5A2)

P

92275MR 1.5 900 RF 2 1/4 CR - 1 MO

321 & Stellite EN 10269 CrMoV TiB4-10

347 Mica & Graph SPW

35 Minus 15 to 550 Yes Hydrocarbon Process P

923HMR 3 900 RF 2 1/4 CR - 1 MO

Assigned to UOP for line class F5A2 UOP – Not Used


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrocarbons w/ WET H2S (SOUR/TOXIC > 3000 ppm H2S),

P 926HMR 6 900 RF 1 1/4 CR - 1/2 MO

SOUR / TOXIC


B16 316L/Graph SPW


941)

minus 15 to 450

Yes

Process with H2 (H2 pp >7.1 kg/cm2) UOP (E5A4)

P


82 Minus 15 to 150 Hydrocarbon Process P

93040XR 1.5 900 RF 304L SS Assigned to UOP for line class L5A1 UOP – Not Used

UOP (Q5A1) Hydrocarbons w/ WET H2S (SOUR 50 - 3000 ppm H2S),

P 93045MR 0 900 RF 321/347 SS

SOUR

321/347 & Stellite (NACE)

B16 321/347 /Graph SPW

85 Minus 15 to 450


P

Hydrocarbons w/ H2S, P 93050HR 0 900 RF 321/347 SS TOXIC

321&Stellite w/ Incoloy

825 drain valves and drain piping

B16 321/347 /Graph SPW w/ Inner Ring

78 360 to 460 MDT=0

Hydrocarbons w/ H2 (pp > 7.1 kg/cm2) (TOXIC, H2S > 3000 ppm)

P

93055MR 0 900 RF 304H SS 304H/347 B8M CL2

304H/Graph SPW

72 minus 60 to 320 Regeneration Gas

P

93091XR 1.5 900 RF 304LSS Assigned to UOP for line class L5A1 UOP – Not Used

151056MR

(will be

1510HMR @

EPC)

1.5 1500 BW Carbon Steel, A106-B


ASME B16.5 Minus 15 to 100 Hydrogen HY


P 1513HMR 3 1500 BW Carbon Steel, A106-B



941)

minus 15 to 400


UOP (B6A2)


LINE

CLASS

CA

(MM)

RATING

FACING PIPE

VALVE


MAX. PRESS

(kg/cm2 GA)

TEMP


SERVICE

CODE

Hydrocarbons w/ WET H2S P


P

1514HMR 3 1500 BW Carbon Steel, A106-B

LSS/TOXIC

316 & Stellite NACE

B7M 316L/Graph SPW

ASME B16.5 (And as per API 941)

minus 15 to 400


*


UOP (E6A2)


P

1522HMR 3 1500 BW 1 1/4 CR-1/2 MO

SOUR


B7M 316L/Graph SPW

140 (And as per API

941)

minus 15 to 375 Yes


P

UOP (F6A2)


P

1525HMR 3 1500 BW 2 1/4 CR– 1 MO SOUR


B7M 316L/Graph SPW

140 minus 15 to 375 Yes


P

153045MR

(will be

1530HMR @

EPC)

0 1500 RF 321H SS 321H & Stellite

B408 N08811


31 Minus 15 to 680 Process P

UOP (Q6A1)


P

1532HMR 1.5 1500 BW 321/347 SS SOUR

321/347 & Stellite (NACE)

EN 10269 CrMoV TiB4-10

321/347 /Graph SPW


941)

minus 15 to 525


P

251056MR

(will be

2510HMR @

EPC)

1.5 2500 BW Carbon Steel, A106-B


260 Minus 15 to 100 Hydrogen HY

131756382-project-specification.pdf

Documents

project engineer manager

project management consultant

property of takreer

rwcc ag

iff cfj

dgs pu

outdated page

issue para