13026 - zintek - catalogo accessori gb · catalogo accessori 05 physical and technological...
TRANSCRIPT
Product Catalogue
product catalogue 02
ZINTEK® IN THE BUILDING INDUSTRY
The tradition of using zinc rolled sections in building dates way back, and is the most widely used non-ferrous material for roofi ng and cladding in Europe.
With the zintek® rolled section, Simar offers an interesting combination of technical and aesthetic performances that is valuable in practical and economic terms.
Zintek® rolled section is at the highest levels for:• Respect for the environment• Economic with respect to non-ferrous metals used in the same applications.• Maintenance free• Exceptional long life• Attractive appearance
The chemical and physical properties of zintek® make it very easy to machine and weld, and its resistance to atmospheric corrosion implies no maintenance and restoration costs, and enhances the design of buildings in various contexts.
TECHNICAL CHARACTERISTICS AND REFRENCE STANDARDS
Zintek® is a zinc-copper-titanium alloy of excellent quality levels that fully complies with the European EN 988 Standard “Zinc and Zinc Alloys – Specifi cations for rolled fl at products for building”.This standard defi nes the requirements for zinc-copper-titanium rolled fl at products used in buildings, supplied in coils, sheets or strips. According to the European EN 1170 Standard, the
alloy is produced with a zinc fi neness of 99.995, Zq quality, with the addition of the appropriate alloying elements.
Zintek® standard: UNI EN 988a) – composition in percentage values
Z1 quality zinc (see table UNI EN 1179)The alloy components improve the characteristics of the zinc rolled section:
• Titanium increases the resistance to permanent strain over time;• Copper increases the material tensile strength.
The combination of both reduces the expansion coeffi cient of the alloy.
Zintek® standard: UNI EN 988b) – mechanical properties
Cu
min
0,080
max
1,000
Ti
min
0,060
max
0,200
Al
min
max
0,015
Zn
remaining
0,2% Rp 0,2
Rm
A50mm
N/mm2
N/mm2
%
%
100
150
35
0,1
45
Unit load yield strength
Tensile strength
Ultimate percent elongation
Yield value percent elongation
Minimum hardness
min
min
min
max
HV
product catalogue 03
catalogo accessori 05
Physical and Technological Properties
Mass Specifi cations
Value
7,4
419
0,401
109
17
0,022
0,017
>300
80.000
7-9
Minimum 3
Minimum 5
40-55
Description
Density
Melting point
Specifi c heat at 20°C
Thermal conductivity at 20°C
Electrical conductivity at 20°C
Coeffi cient of thermal expansion lengthwise to lamination
Coeffi cient of thermal expansion transversal to lamination
Recrystallization limits
Modulus of elasticity
Erichsen drawing
Length tolerances at 180° 20°C
Width tolerances at 180° 20°C
Camber tolerances
Non-magnetic
Fireproof
Unit of measurement
Kg/dm3
°C
kJ/kg°C
W/m°K
m/ohm mm2
mm/m°C
mm/m°C
°C
N/mm2
mm
n°
n°
%
Nominal thickness mm
0,60
0,65
0,70
0,80
1,00
1,20
1,50
Approximate mass kg/m2
4,3
4,7
5,0
5,8
7,2
8,6
10,8
product catalogue 04
NATURAL coils
Item n.ZKNSC180601100
ZKNSC180651100
ZKNSC180700200ZKNSC180700250ZKNSC180700280ZKNSC180700310ZKNSC180700330ZKNSC180760333ZKNSC180760367ZKNSC180700400ZKNSC180670500ZKNSC180700550ZKNSC180700600ZKNSC180700670ZKNSC180700800ZKNSC180701000ZKNSC180701100
ZKNSC180800200ZKNSC180800250ZKNSC180800280ZKNSC180800330ZKNSC180860333ZKNSC180860367ZKNSC180800400ZKNSC180800500ZKNSC180800550ZKNSC180700600ZKNSC180800670ZKNSC180800800ZKNSC180801000ZKNSC180801100
ZKNSC181000200ZKNSC181000250ZKNSC181000280ZKNSC181000330ZKNSC181000333ZKNSC181000367ZKNSC181000400ZKNSC181000500ZKNSC181000550ZKNSC181000600ZKNSC181000670ZKNSC181000800ZKNSC181001000ZKNSC181001100
ZKNSC181201100
ZKNSC181501100
Length in mm1100
1100
200250280310330333367400500550600670800
10001100
200250280330333367400500550600670800
10001100
200250280330333367400500550600670800
10001100
1100
1100
Thickness in mm0,60
0,65
0,700,700,700,700,700,700,700,700,700,700,700,700,700,700,70
0,800,800,800,800,800,800,800,800,800,800,800,800,800,80
1,001,001,001,001,001,001,001,001,001,001,001,001,001,00
1,20
1,5
LENGTHS: Different lengths available on request. PROTECTIVE FILM: On request
PRE-PATINATED coils
Item n.ZKNPRSC280601100
ZKNPRSC280651100
ZKNPRSC280700200ZKNPRSC280700250ZKNPRSC280700280ZKNPRSC280700310ZKNPRSC280700330ZKNPRSC280760333ZKNPRSC280760367ZKNPRSC280700400ZKNPRSC280670500ZKNPRSC280700550ZKNPRSC280700600ZKNPRSC280700670ZKNPRSC280700800ZKNPRSC280701000ZKNPRSC280701100
ZKNPRSC280800200ZKNPRSC280800250ZKNPRSC280800280ZKNPRSC280800330ZKNPRSC280860333ZKNPRSC280860367ZKNPRSC280800400ZKNPRSC280800500ZKNPRSC280800550ZKNPRSC280700600ZKNPRSC280800670ZKNPRSC280800800ZKNPRSC280801000ZKNPRSC280801100
ZKNPRSC281000200ZKNPRSC281000250ZKNPRSC281000280ZKNPRSC281000330ZKNPRSC281000333ZKNPRSC281000367ZKNPRSC281000400ZKNPRSC281000500ZKNPRSC281000550ZKNPRSC281000600ZKNPRSC281000670ZKNPRSC281000800ZKNPRSC281001000ZKNPRSC281001100
ZKNPRSC281201100
ZKNPRSC281501100
Length in mm1100
1100
200250280310330333367400500550600670800
10001100
200250280330333367400500550600670800
10001100
200250280330333367400500550600670800
10001100
1100
1100
Thickness in mm0,60
0,65
0,700,700,700,700,700,700,700,700,700,700,700,700,700,700,70
0,800,800,800,800,800,800,800,800,800,800,800,800,800,80
1,001,001,001,001,001,001,001,001,001,001,001,001,001,00
1,20
1,5
product catalogue 05
product catalogue 06
NATURAL plates
Item n.ZKLSC1606010002000ZKLSC1606010002250ZKLSC1606010003000ZKLSC1606510002000ZKLSC1606510002250ZKLSC1606510003000ZKLSC1607010002000ZKLSC1607010002250ZKLSC1607010003000ZKLSC1608010002000ZKLSC1608010002250ZKLSC1608010003000ZKLSC1610010002000ZKLSC1610010002250ZKLSC1610010003000ZKLSC1612010002000ZKLSC1612010002250ZKLSC1612010003000ZKLSC1615010002000ZKLSC1615010002250ZKLSC1615010003000
ZKLSC1606011002000ZKLSC1606011002250ZKLSC1606011003000ZKLSC1606511002000ZKLSC1606511002250ZKLSC1606511003000ZKLSC1607011002000ZKLSC1607011002250ZKLSC1607011003000ZKLSC1608011002000ZKLSC1608011002250ZKLSC1608011003000ZKLSC1610011002000ZKLSC1610011002250ZKLSC1610011003000ZKLSC1612011002000ZKLSC1612011002250ZKLSC1612011003000ZKLSC1615011002000ZKLSC1615011002250ZKLSC1615011003000
Width in mm100010001000100010001000100010001000100010001000100010001000100010001000100010001000
110011001100110011001100110011001100110011001100110011001100110011001100110011001100
Length in mm200022503000200022503000200022503000200022503000200022503000200022503000200022503000
200022503000200022503000200022503000200022503000200022503000200022503000200022503000
Thickness in mm0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50
0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50
Weight/pallet in kg (~)100010001000100010001000100010001000100010001000100010001000100010001000100010001000
100010001000100010001000100010001000100010001000100010001000100010001000100010001000
product catalogue 07
PRE-PATINATED plates
Item n.ZKLPRSC2606010002000ZKLPRSC2606010002250ZKLPRSC2606010003000ZKLPRSC2606510002000ZKLPRSC2606510002250ZKLPRSC2606510003000ZKLPRSC2607010002000ZKLPRSC2607010002250ZKLPRSC2607010003000ZKLPRSC2608010002000ZKLPRSC2608010002250ZKLPRSC2608010003000ZKLPRSC2610010002000ZKLPRSC2610010002250ZKLPRSC2610010003000ZKLPRSC2612010002000ZKLPRSC2612010002250ZKLPRSC2612010003000ZKLPRSC2615010002000ZKLPRSC2615010002250ZKLPRSC2615010003000
ZKLPRSC2606011002000ZKLPRSC2606011002250ZKLPRSC2606011003000ZKLPRSC2606511002000ZKLPRSC2606511002250ZKLPRSC2606511003000ZKLPRSC2607011002000ZKLPRSC2607011002250ZKLPRSC2607011003000ZKLPRSC2608011002000ZKLPRSC2608011002250ZKLPRSC2608011003000ZKLPRSC2610011002000ZKLPRSC2610011002250ZKLPRSC2610011003000ZKLPRSC2612011002000ZKLPRSC2612011002250ZKLPRSC2612011003000ZKLPRSC2615011002000ZKLPRSC2615011002250ZKLPRSC2615011003000
Width in mm100010001000100010001000100010001000100010001000100010001000100010001000100010001000
110011001100110011001100110011001100110011001100110011001100110011001100110011001100
Length in mm200022503000200022503000200022503000200022503000200022503000200022503000200022503000
200022503000200022503000200022503000200022503000200022503000200022503000200022503000
Thickness in mm0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50
0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50
Weight/pallet in kg (~)100010001000100010001000100010001000100010001000100010001000100010001000100010001000
100010001000100010001000100010001000100010001000100010001000100010001000100010001000
Natural URBAN
Item n.
ZKNSCLSTURB101000ZKNSCLSTURB121000ZKNSCLSTURB151000ZKNSCLSTURB101100ZKNSCLSTURB121100ZKNSCLSTURB151100
Meshmm
R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5
Thickness in mm
11,21,51
1,21,5
Empty/Full
15%15%15%15%15%15%
Maxempty (~)
45%45%45%45%45%45%
Elongation (~)15%15%15%15%15%15%
Sheet widthin mm100010001000110011001100
Pre-patinated URBAN
Item n.
ZKNPRSCLSTURB101000ZKNPRSCLSTURB121000ZKNPRSCLSTURB151000ZKNPRSCLSTURB101100ZKNPRSCLSTURB121100ZKNPRSCLSTURB151100
Meshmm
R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5
Thickness in mm
11,21,51
1,21,5
Empty/fullfront panel (~)
15%15%15%15%15%15%
Maxempty (~)
45%45%45%45%45%45%
Elongation (~)15%15%15%15%15%15%
Sheet width in mm100010001000110011001100
Natural EXA 16
Item n.
ZKNSCLSTEXA101000ZKNSCLSTEXA121000ZKNSCLSTEXA151000ZKNSCLSTEXA101100ZKNSCLSTEXA121100ZKNSCLSTEXA151100
Meshmm
E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5
Thickness in mm
11,21,51
1,21,5
Empty/fullfront panel (~)
15%15%15%15%15%15%
Maxempty (~)
36%36%36%36%36%36%
Elongation (~)15%15%15%15%15%15%
Sheet width in mm100010001000110011001100
Pre-patinated EXA 16
Itemn.
ZKNPRSCLSTEXA101000ZKNPRSCLSTEXA121000ZKNPRSCLSTEXA151000ZKNPRSCLSTEXA101100ZKNPRSCLSTEXA121100ZKNPRSCLSTEXA151100
Meshmm
E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5
Thickness in mm
11,21,51
1,21,5
Empty/fullfront panel (~)
15%15%15%15%15%15%
Maxempty (~)
36%36%36%36%36%36%
Elongation (~)15%15%15%15%15%15%
Sheet width in mm100010001000110011001100
catalogo accessori 09product catalogue 08
FLATTENED plates
product catalogue 09
SURFACE APPEARANCE
The natural appearance of zintek® is a rolling-produced uniform shiny grey colour. Atmospheric agents cause the surface to oxidise creating a protective layer which remains stable over time, and gives a natural ageing effect to the surface with an attractive slate grey colour. The oxidation process may cause an even colouring of the surface, with different shades of grey, however it is only a transitory condition that fi nally evens out with an attractive uniform colour over the entire surface.
The natural look can be adjusted through specifi c surface treatments, without changing the natural resistance to corrosion.
REACTIVITY TO ATMOSPHERIC AGENTS AND CORROSION RESISTANCE
The protective layer that is formed when zinc is exposed to oxygen and water creates a layer of basic zinc carbonate that protects the metal. This is a natural protection process for zinc giving long-lasting strength
Durability
REACTIVITY TO TEMPERATURE VARIATIONSThe rolled section is not affected by any temperature changes that occur after processing and laying. It has a melting point of approximately 419 ° C and its recrystallizatio limit, which is very important for the soldering process, is 300°C.Fireproof and resistant to UV rays, the material is not affected by wind erosion.
BEHAVIOUR WITH CHEMICAL ACTIONSAvoid contact with any acid or alkaline substances.
BEHAVIOUR WITH ELECTROCHEMICAL ACTIONSWhen different metals come into contact with each other, they can damage each other due to the different potential. Therefore zintek® must not come into contact with copper and its alloys (brass), neither directly or indirectly, for example due to rainwater running over the surface from the roof or copper elements on to the zintek® rolled sections.
ECOLOGY AND THE ENVIRONMENTIt has been proved that any zinc deposits carried down by rainwater do not constitute any form of environmental risk.
RECYCLINGThe zinc that is applied to the roof or other building surfaces is 100% recyclable should it need replacing, and can be used in various production fi elds and has a high market value even as scrap.
WORKABILITYGiven its physical-chemical properties, zintek® is extremely ductile and malleable, making it ideal for any metal plate working. The rolled section must not be processed at temperatures below 10°C. It is good practice to begin work after having brought the temperature of the rolled section to this minimum value.As far as winter work is concerned, it is advisable to comply with best practice, i.e. prefabrication in the workshop, where the thermal conditions are better.
Environment
Rural
Urban industrial
Industrial agglomeration
Marine
Durability
Over 100 years
60 years
40 years
40 to 60 years
catalogo accessori 09product catalogue 10
For any work that has to be carried out on site, the rolled sections can be preheated by means of hot air fans.
Temperature variations have no infl uence on the rolled sections after the processing and laying phases, and therefore have no affect on the behaviour of the building
WELDABILITYIt offers excellent weldability with both traditional methods, using a lead-tin soldering alloy, and using recent TIG or induction welding methods.
If a mechanical join needs making in the zintek® rolled section, using screws or nails, then only aluminium, galvanised steel or stainless steel should be used. Copper and its alloys, such as brass, should not be used due to the electrochemical corrosion they could trigger.
MAINTENANCEUnlike other materials it requires no maintenance.
catalogo accessori 09product catalogue 11
50 cm to 80 cm
Leaf guards
Eaves flashing
Suspension brackets
Elbows
Intermediate sections
Branch pipe fittings
Pipe collars
Collar spacers
Guttering
Terminal with elbow
2 m to
3 m
Gutter bracket
Zintek® accessories: assembly
catalogo accessori 09product catalogue 12
catalogo accessori 09product catalogue 13
Natural zintek® accessories
English
Natural zinc titanium entry 280/80
Natural zinc titanium entry 333/100
Natural zinc titanium entry 333/120
Natural zinc titanium entry 400/120
Square zinc titanium entry 333/100
Square zinc titanium entry 400/120
Code
106280080
106330100
106330120
106400120
106500132
106500133
Natural zinc titanium angle 280 est.
Natural zinc titanium angle 333 est.
Natural zinc titanium angle 400 est.
Natural zinc titanium angle 280 int.
Natural zinc titanium angle 333 int.
Natural zinc titanium angle 400 int.
10E128000
10E133000
10E140000
10I128000
10I133000
10I140000
German type, left natural zinc titanium headline 280
German type, right natural zinc titanium headline 280
German type, left natural zinc titanium headline 333
German type, right natural zinc titanium headline 333
German type, left/right natural zinc titanium headline 280
German type, left/right natural zinc titanium headline 330
German type, left/right natural zinc titanium headline 400
Natural zinc titanium round headline 280
Natural zinc titanium round headline 333
Natural zinc titanium round headline 400
105328002
105328001
105333002
105333001
105328000
105333000
105340000
105628000
105633000
105640000
Natural zinc titanium welding elbow 80 mm 40°
Natural zinc titanium welding elbow 100 mm 40°
Natural zinc titanium welding elbow 120 mm 40°
Natural zinc titanium welding elbow 80 mm 72°
Natural zinc titanium welding elbow 100 mm 72°
Natural zinc titanium welding elbow 120 mm 72°
Natural zinc titanium welding elbow 80 mm 85°
Natural zinc titanium welding elbow 100 mm 85°
Natural zinc titanium shift 80 mm
Natural zinc titanium shift 100 mm
Natural zinc titanium shift 120 mm
104001080
104001100
104001120
104002080
104002100
104002120
104003080
104003100
104004080
104004100
104004120
Natural zinc titanium 80 mm transfer pipe with leaf guard
Natural zinc titanium 100 mm transfer pipe with leaf guard
Natural zinc titanium 120 mm transfer pipe with leaf guard
108007080
108007100
108007120
Zinc 80 mm collars + 8x80 stainless steel pin and plug
Zinc 100 mm collars + 8x80 stainless steel pin and plug
Zinc 120 mm collars + 8x80 stainless steel pin and plug
105003080
105003100
105003120
Natural zinc titanium 80/115 rose
Natural zinc titanium 100/115 rose
106009080
106009100
Photo
catalogo accessori 09product catalogue 14
Natural zintek® accessories
English
Natural zinc titanium 260 expansion joint, 3 m
Natural zinc titanium 390 expansion joint, 6 m
Natural zinc titanium 280 expansion joint
Natural zinc titanium 330 expansion joint
Natural zinc titanium 400 expansion joint
Code
105020000
105021000
105028000
105033000
105040000
Photo
Natural zinc titanium gutter 280x0.7 EN 612
Natural zinc titanium gutter 333x0.7 EN 612
Natural zinc titanium gutter 400x0.7 EN 612
Natural zinc titanium square gutter 280x0.7 EN 612
Natural zinc titanium square gutter 330x0.7 EN 612
Natural zinc titanium square gutter 400x0.7 EN 612
100128070
100133070
100140070
102128070
102133070
102140070
Natural zinc titanium pipe 80x0.65 3 m
Natural zinc titanium pipe 80x0.65 4 m
Natural zinc titanium pipe 100x0.65 3 m
Natural zinc titanium pipe 100x0.65 4 m
Natural zinc titanium pipe 120x0.65 3 m
Natural zinc titanium pipe 120x0.65 4 m
103080045
103080055
103100045
103100055
103120045
103120055
Natural zinc titanium covered Zn supports 280/25/6K
Natural zinc titanium covered Zn supports 280/25/6L
Natural zinc titanium covered Zn supports 330/25/6K
Natural zinc titanium covered Zn supports 330/25/6L
Natural zinc titanium covered Zn supports 400/25/6L
Natural zinc titanium covered Zn square supports 333/25/6L
Natural zinc titanium covered Zn square supports 400/25/6L
107001164
107001165
107001166
107001167
107001168
107001169
107001170
German type natural zinc titanium pipe unions, 80 (200x200x470)
German type natural zinc titanium pipe unions, 100 (200x200x470)
106700080
106700100
Natural zinc titanium duck leg 80
Natural zinc titanium duck leg 100
Natural zinc titanium duck leg 120
108005080
108005100
108005120
Natural zinc titanium central funnel 80
Natural zinc titanium side funnel 80
Natural zinc titanium central funnel 100
Natural zinc titanium side funnel 100
Natural zinc titanium central funnel 120
Natural zinc titanium side funnel 12 0
108000080
108001080
108000100
108001100
108000120
108001120
Natural zinc titanium drilled net 165x0.7 mm
Natural zinc titanium drilled net 200x0.7 mm
Natural zinc titanium drilled net 250x0.7 mm
Natural zinc titanium drilled net 333x0.7 mm
Natural zinc titanium drilled net 1000x0.7 mm
Natural zinc titanium fl attened net 1100x0.8 RB 15
Natural zinc titanium fl attened net 1100x1.0 RB 15
100165070
100200070
100250070
100333070
100100070
1001100080RB15
1001100100RB15
catalogo accessori 09product catalogue 15
Pre-patinated zintek® accessories
English
Pre-patinated zinc titanium entry 280/80
Pre-patinated zinc titanium entry 333/100
Pre-patinated zinc titanium entry 333/120
Pre-patinated zinc titanium entry 400/120
Pre-patinated zinc titanium square entry 333/100
Pre-patinated zinc titanium square entry 400/120
Code
106280080P
106330100P
106330120P
106400120P
106500132P
106500133P
Pre-patinated zinc-titanium external angle 280
Pre-patinated zinc-titanium external angle 333
Pre-patinated zinc-titanium external angle 400
Pre-patinated zinc-titanium internal angle 280
Pre-patinated zinc-titanium internal angle 333
Pre-patinated zinc-titanium internal angle 400
10E128000P
10E133000P
10E140000P
10I128000P
10I133000P
10I140000P
German type, left 280 pre-patinated zinc-titanium headline
German type, right 280 pre-patinated zinc-titanium headline
German type, left 333 pre-patinated zinc-titanium headline
German type, right 333 pre-patinated zinc-titanium headline
German type, left/right 280 pre-patinated zinc-titanium headline
German type, left/right 330 pre-patinated zinc-titanium headline
German type, left/right 400 pre-patinated zinc-titanium headline
Round 280 pre-patinated zinc-titanium headline
Round 333 pre-patinated zinc-titanium headline
Round 400 pre-patinated zinc-titanium headline
105328002P
105328001P
105333002P
105333001P
105328000P
105333000P
105340000P
105628000P
105633000P
105640000P
Prepatinated zinc titanium weld elbow 80 mm 40°
Prepatinated zinc titanium weld elbow 100 mm 40°
Prepatinated zinc titanium weld elbow 120 mm 40°
Prepatinated zinc titanium weld elbow 80 mm 72°
Prepatinated zinc titanium weld elbow 100 mm 72°
Prepatinated zinc titanium weld elbow 120 mm 72°
Prepatinated zinc titanium weld elbow 80 mm 85°
Prepatinated zinc titanium weld elbow 100 mm 85°
Pre-patinated zinc titanium shift 80
Pre-patinated zinc titanium shift 100
Pre-patinated zinc titanium shift 120
104001080P
104001100P
104001120P
104002080P
104002100P
104002120P
104003080P
104003100P
104004080P
104004100P
104004120P
Pre-patinated zinc titanium transfer pipe 80 mm with leaf guard
Pre-patinated zinc titanium transfer pipe 100 mm with leaf guard
Pre-patinated zinc titanium transfer pipe 120 mm with leaf guard
108007080P
108007100P
108007120P
Pre-patinated zinc 80 mm collars + 8x80 stainless steel pin and plug
Pre-patinated zinc 100 mm collars + 8x80 stainless steel pin and plug
Pre-patinated zinc 120 mm collars + 8x80 stainless steel pin and plug
105003080P
105003100P
105003120P
Pre-patinated zinc titanium 80/115 rose
Pre-patinated zinc titanium 100/115 rose
106009080P
106009100P
Photo
catalogo accessori 09product catalogue 16
Accessori in zintek® prepatinato
English
Pre-patinated zinc titanium 260 expansion joint, 3 m
Pre-patinated zinc titanium 390 expansion joint, 6 m
Pre-patinated zinc titanium 280 expansion joint
Pre-patinated zinc titanium 330 expansion joint
Pre-patinated zinc titanium 400 expansion joint
Code
105020000P
105021000P
105028000P
105033000P
105040000P
Photo
Pre-patinated zinc titanium gutter 280x0.7 EN 612
Pre-patinated zinc titanium gutter 333x0.7 EN 612
Pre-patinated zinc titanium gutter 400x0.7 EN 612
Pre-patinated zinc titanium square gutter 280x0.7 EN 612
Pre-patinated zinc titanium square gutter 333x0.7 EN 612
Pre-patinated zinc titanium square gutter 400x0.7 EN 612
100128070P
100133070P
100140070P
102128070P
102133070P
102140070P
Pre-patinated zinc titanium pipe 80x0.65 3 m
Pre-patinated zinc titanium pipe 80x0.65 4 m
Pre-patinated zinc titanium pipe 100x0.65 3 m
Pre-patinated zinc titanium pipe 100x0.65 4 m
Pre-patinated zinc titanium pipe 120x0.65 3 m
Pre-patinated zinc titanium pipe 120x0.65 4 m
103080045P
103080055P
103100045P
103100055P
103120045P
103120055P
Pre-patinated zinc titanium covered Zn supports 280/25/6K
Pre-patinated zinc titanium covered Zn supports 280/25/6L
Pre-patinated zinc titanium covered Zn supports 333/25/6K
Pre-patinated zinc titanium covered Zn supports 333/25/6L
Pre-patinated zinc titanium covered Zn supports 400/25/6L
Pre-patinated zinc titanium covered Zn square supports 333/25/6L
Pre-patinated zinc titanium covered Zn square supports 400/25/6L
107001164P
107001165P
107001166P
107001167P
107001168P
107001169P
107001170P
German type pre-patinated zinc titanium pipe unions, 80 (200x200x470)
German type pre-patinated zinc titanium pipe unions, 100 (200x200x470)
106700080P
106700100P
Pre-patinated zinc titanium duck leg 80
Pre-patinated zinc titanium duck leg 100
Pre-patinated zinc titanium duck leg 120
108005080P
108005100P
108005120P
Pre-patinated zinc titanium central funnel 80
Pre-patinated zinc titanium side funnel 80
Pre-patinated zinc titanium central funnel 100
Pre-patinated zinc titanium side funnel 100
Pre-patinated zinc titanium central funnel 120
Pre-patinated zinc titanium side funnel 120
108000080P
108001080P
108000100P
108001100P
108000120P
108001120P
Pre-patinated zinc titanium drilled net 165x0.7 mm
Pre-patinated zinc titanium drilled net 200x0.7 mm
Pre-patinated zinc titanium drilled net 250x0.7 mm
Pre-patinated zinc titanium drilled net 333x0.7 mm
Pre-patinated zinc titanium drilled net 1000x0.7 mm
Pre-patinated zinc titanium fl attened net 1100x0.8 RB 15
Pre-patinated zinc titanium fl attened net 1100x1.0 RB 15
100165070P
100200070P
100250070P
100333070P
100100070P
1001100080RB15P
1001100100RB15P
product catalogue 17
[email protected] | www.zintek.it
Zintek Srl Via delle Industrie 22 - 30175 Porto Marghera - Veneziatel +39 041 2901866 - fax +39 041 2901834