12vdc led power supply spec sheet digest · led indicator for power on. high operating temperature...

12VDC LED POWER SUPPLYSPEC SHEET DIGEST

LTH-2

LTH-4

LTH-8

LTH-16

LTH-25

LTP-2

LTP-6

LTP-2 and -6 Wiring Instructions

LTP-2 and LTP-6 Plug-in Power Supply Installation Instructions LTP-2 = 25w max. LTP-6 = 60w max.

For GM Lighting LEDTask™ High Output and Standard Output Flexible LED Linear Ribbon and LED Rigid and

Aluminum LightBar

Before wiring to the power supply please determine the wattage of the LEDTask lighting that you are about to

energize (i.e. LTR300-WW High Output Ribbon is 48-watts per reel, LTR300-SO-WW Standard Output Ribbon is 24-

watts per reel, LTB-8, LTAB-N-8 is 1.92-watts each and LTB-16, LTAB-N-16 is 3.84-watts each).

Each plug-in power supply comes with a power cord/ switch/plug, a 120vac/12vdc power supply and a DC Jack.

1) Connect the female end of the power cord to the recessed male contacts on the power supply. 2) Next connect the

female end of the DC Jack to the male end of the DC cord from the power supply. 3) Finally connect the wire leads from

the LTW / LTW-WP Series Connectors to the wire leads from the DC Jack; making sure that the positive (+) lead from the

LTW / LTW-WP is connected to the positive (+) lead of the DC Jack (smooth wire w/white letters) and the negative (-)

lead from the LTW / LTW-WP is connected to the negative (-) lead of the DJ Jack (ribbed wire). Please plug-in the power

supply at this time. If the ribbon does not light up, please check that the in-line switch is turned ‘on’ and that all

connections have correct polarity. Use these guidelines for LTB and LTAB-N LED LightBar installations.

9830 W. 190th St. • Unit F • Mokena, IL 60448 • Toll-Free: (866) 671-0811 • FAX: (708) 478-2640 • www.gmlighting.net

Power Cord

Power Supply

DC Jack

1

2

3

In-line Switch

http://www.gmlighting.net/

Project:

Type:

Location:

Contact Phone:

LED ELECTRONIC25W POWER SUPPLYby

PRODUCT DESCRIPTIONUniversal AC input / full range electronic power supply that features short circuit, overload, and over voltage protection. 12VDC output. 88 - 264 VAC input. 47 - 63Hz frequency range at 79% typical efficiency. 2.1 Amps. 25 Watts.

PRODUCT SPECIFICATIONS

Construction: Construction: Sturdy ventilated full metal enclosure for maximum circuit board cooling. No external fusing required. LED indicator for power on. High operating temperature up to 70°C (158°F). Screw terminals.

Electrical: Output voltage 12VDC. 110 - 180% rated output power overload protection. Overload recovers automatically after fault condition is removed. Withstands 300VAC surge input for 5 seconds. Utilizes 105°C (221°F) long life electro-lytic capacitors.

Label: UL recognized.

Not rated for outdoor use.

Catalog Max. Input Output Weight Dimensions Number Wattage Voltage Voltage L W H

LTH-2 25W 120V 12 VDC 6.9 oz. 3-3/16” 2” 1-1/8”

NOTE: For 12V Voltage Drop - Please see our website

L

H

W

1

2

3

4

5

GM Lighting, LLC • 9830 W. 190th St. • Unit F • Mokena, IL 60448Toll-Free: (866) 671-0811 FAX: (708) 478-2640 • www.gmlighting.net e-mail: [email protected] • Specifications subject to change without notice. LTH2_103013

Project:

Type:

Location:

Contact Phone:






Label: ETL listed.


Catalog Max. Input Weight Output Dimensions Number Wattage Voltage Voltage L W H

LTH-4 50W 120V 14.3 oz. 12 VDC 3-7/8” 3-13/16” 1-1/2 ”

NOTE: For 12V Voltage Drop - Please see our website.

L

H

W

1

2

3

4

5


Project:

Type:

Location:

Contact Phone:





Electrical: Output voltage 12VDC. 110 - 150% rated output power overload protection. Overload recovers automatically after fault condition is removed. Withstands 300VAC surge input for 5 seconds. Utilizes 105°C (221°F) long life elec-trolytic capacitors. Built-in constant current limiting circuit. 100% full load burn-in test. Fixed switching frequency at PFC:67KHz, PWM:134KHz.

Label: ETL listed.



LTH-8 100W 120V 1.8 lb. 12 VDC 7-1/2” 4” 1-3/4 ”



L

H

W

Project:

Type:

Location:

Contact Phone:


PRODUCT DESCRIPTIONUniversal AC input / full range electronic power supply that features short circuit, overload, and over voltage protection. 12VDC output. 88 - 264 VAC input. 47 - 63Hz frequency range at 81% typical efficiency. 16.7 Amps. 200 Watts. Fan cooled.



Electrical: Output voltage 12VDC. 110 - 150% rated output power overload protection. Overload recovers automatically after fault condition is removed. Withstands 300VAC surge input for 5 seconds. Utilizes 105°C (221°F) long life elec-trolytic capacitors. Built-in constant current limiting circuit. 100% full load burn-in test. Fixed switching frequency at PFC:67KHz, PWM:134KHz.

Label: ETL listed.



LTH-16 200W 120V 1.15 lb. 12 VDC 8-1/4” 4” 2 ”



L

H

W

Project:

Type:

Location:

Contact Phone:


PRODUCT DESCRIPTIONUniversal AC input / full range electronic power supply that features short circuit, overload, and over voltage protection. 12VDC output. 88 - 264 VAC input. 47 - 63Hz frequency range at 79% typical efficiency. 25 Amps. 320 Watts. Fan cooled.




Label: ETL listed.


Catalog Max. Input Output Dimensions Number Wattage Voltage Voltage L W H

LTH-25 320W 120V 12 VDC 9” 4.5” 2”


L

H

W

1

2

3

4

5


Project:

Type:

Location:

Contact Phone:

12VDC LED ELECTRONIC25W PLUG-IN POWER SUPPLYby

GM Lighting, LLC • 9830 W. 190th St. • Unit F • Mokena, IL 60448Toll-Free: (866) 671-0811 FAX: (708) 478-2640 • www.gmlighting.net Specifications subject to change without notice. LTP-2_090213

1-3/4”

1-1/4”

3-1/4 ”

48”

126”

18” DC JACK

PRODUCT DESCRIPTIONLED electronic Class II power supply with 2 prong cord and plug with inline on/off switch. 12 VDC output. 120 AC input. Includes 18” DC jack.


Construction: Power supply is in a fully enclosed plastic case. Standard type P1M plug. LED indicator for power on.

Electrical: Output voltage 12 VDC. Short circuit, overload, over voltage and over temperature protections. 126” 2 prong cord and plug with inline on/off switch. 2 amps

Label: ETL listed.


Catalog Max. Input Amps Output Weight Dimensions Number Wattage Voltage Voltage L W H

LTP-2 25W 120V 2.0 12 VDC 10.4 oz. 3-1/4” 1-3/4” 1-1/4”

NOTE: For 12V Voltage Drop - Please see our website: http://www.gmlighting.net/products/12vdc-electronic-led-power-supplies and click on 12VDC Voltage Drop Chart on the left sidebar, or see page 67 in GM Lighting’s 2013 Product Catalog

Project:

Type:

Location:

Contact Phone:

12VDC LED ELECTRONIC50W PLUG-IN POWER SUPPLYby

GM Lighting, LLC • 9830 W. 190th St. • Unit F • Mokena, IL 60448Toll-Free: (866) 671-0811 FAX: (708) 478-2640 • www.gmlighting.net Specifications subject to change without notice. LTP-6_090213

2-3/8”

1-1/4”

5-1/2 ”

48”

126”

18” DC JACK

PRODUCT DESCRIPTIONLED electronic Class II power supply with 2 prong cord and plug with inline on/off switch. 12 VDC output. 120 AC input. Includes 18” DC jack.


Construction: Power supply is in a fully enclosed plastic case. Standard type P1M plug. LED indicator for power on.

Electrical: Output voltage 12 VDC. Short circuit, overload, over voltage and over temperature protections. 126” 2 prong cord and plug with inline on/off switch. 5 amps.

Label: ETL listed.


Catalog Max. Input Amps Output Weight Dimensions Number Wattage Voltage Voltage L W H

LTP-6 50W 120V 5.0 12 VDC 14.8 oz. 5-1/2” 2-1/4” 1-1/4”

NOTE: For 12V Voltage Drop - Please see our website: http://www.gmlighting.net/products/12vdc-electronic-led-power-supplies and click on 12VDC Voltage Drop Chart on the left sidebar, or see page 67 in GM Lighting’s 2013 Product Catalog

12vdc led power supply spec sheet digest · led indicator for power on. high operating temperature...

Documents