1/266 chhattisgarh state industrial development … rcc hume pipe amdt.pdf1/266 chhattisgarh state...

1/266

Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) First Floor, Udyog Bhawan, Ring Road No.-1, Telibandha , Raipur 492006 (C.G) EPABX No.- 0771-6002071-73, TexeFax: 0771-4057624 Website: www.csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated :

AMENDMENT

Sub:- Amendment in the Rate Contract for RCC Hume Pipe (Valid From dated 30-04-2016 to 29-04-2017) Ref:- 1) Offer letter No. - 4179 Dated 05-07-2016 2) Your acceptance letter Dated 07-07-2016

The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 is made with immediate effect in favour for M/s Bastar Cement Product, Geedam Road, P.O., Pandripani-494001 Jagdalpur in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.

S.No Reference FOR:- TO BE READ:- 1 Page No.

3/13

SCHEDULE “A” 3. DESCRIPTION OF ITEM- RCC Hume Pipe-

Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT

Extra As Applicable (Rs per Meter)

1 2 3 4 Schedule - 8 Transportation Charges: Item Description Distance in km./ Transportation Charges in % on the Total Cost of Pipes/ Collars

CSIDC_RC.37.80.316

Upto 50 km NIL

10 CSIDC_RC.37.80.316

Above 50 km. upto 100 km.

21.00

11 CSIDC_RC.37.80.317


28.00

12 CSIDC_RC.37.80.318


31.00

13 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



10 CSIDC_RC.37.80.316

Upto 50 km 19.00

11 CSIDC_RC.37.80.316


21.00

12 CSIDC_RC.37.80.317


28.00

13 CSIDC_RC.37.80.318


31.00

14 CSIDC_RC.37.80.319

Above 200 km.

36.00

All other terms & conditions remain unchanged.

(Subas Chandra Bhagat) Incharge Marketing

For and on behalf of the purchaser named in CSIDC Form No.2

2/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Bastar Cement Product, Geedam Road, P.O., Pandripani-494001 Jagdalpur, Mob.-9826612012,

9425212012 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016

2. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.

3. The Registrar, Honourable High court Chhattisgarh, Bilaspur.

4. The Accountant General Chhattisgarh State, Raipur.

5. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd.,

6. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC,

7. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.

8. (i) Engineer-In-Chief, Water Resources Department, Sihawa Bhawan, Civil Lines, Raipur (ii) Engineer in Chief PHED C.G. Neer Bhawan, Raipur (iii) Engineer-In-Chief, Rural Engineering Services, Vikas Bhawan, Civil Lines, Raipur (iv) Engineer in Chief PWD C.G.Civil lines Raipur (C.G)

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority.

9. (i) CSIDC (DEPARTMENTAL TECHNICAL WING) (ii) ADG (Q & A), DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager Indian Register of Shipping, Senior MIG-2, Sector-A, 1st Floor, Infront of Bank of

India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata (W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor, M.K.

Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal (MP)-

462011.

Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of DTIC/NSIC/DGS&D Registration, BIS/BEE License etc. before taking action i.e. inspection of stores, as the responsibility rests with the concerned authority. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores.

10. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master file of Rate Contract.

11. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website.

12. Main file of Item- “RCC Hume Pipe.”



3/266



AMENDMENT


The following amendment in the subject Rate Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SSI/7250 Dated 30-04-2016 is made with immediate effect in favour for M/s Shivshakti Industries, Kaushalya Bhagat Pro., Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.) in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


4/14


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

53 CSIDC_RC.37.80.316


21.00

54 CSIDC_RC.37.80.317


28.00

55 CSIDC_RC.37.80.318


31.00

56 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



53 CSIDC_RC.37.80.316

Upto 50 km 19.00

54 CSIDC_RC.37.80.316


21.00

55 CSIDC_RC.37.80.317


28.00

56 CSIDC_RC.37.80.318


31.00

57 CSIDC_RC.37.80.319

Above 200 km.

36.00




4/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Shivshakti Industries, Kaushalya Bhagat Pro., Kena Bandh, Bouripara, Ambikapur, Distt.-

Surguja (C.G.)-497001 Mob-9425582023-24 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SSI/7250 Dated 30-04-2016.












462011.







5/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 is made with immediate effect in favour for M/s Grewal Cement Pipe Industries, 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012 [email protected] in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


3/13


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

10 CSIDC_RC.37.80.316


21.00

11 CSIDC_RC.37.80.317


28.00

12 CSIDC_RC.37.80.318


31.00

13 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



10 CSIDC_RC.37.80.316

Upto 50 km 19.00

11 CSIDC_RC.37.80.316


21.00

12 CSIDC_RC.37.80.317


28.00

13 CSIDC_RC.37.80.318


31.00

14 CSIDC_RC.37.80.319

Above 200 km.

36.00


(Subas Chandra Bhagat)

Incharge Marketing For and on behalf of the purchaser named in CSIDC Form No.2

6/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Grewal Cement Pipe Industries, 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-

9826612012, 9425212012 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016.












462011.







7/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 is made with immediate effect in favour for M/s Engineers Enterprises, Rawabhata Industrial Area, P.O. Birgaon-493221 Raiupr (C.G.) Mob-9826612012,9425212012 [email protected] in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


3/14


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

10 CSIDC_RC.37.80.316


21.00

11 CSIDC_RC.37.80.317


28.00

12 CSIDC_RC.37.80.318


31.00

13 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



10 CSIDC_RC.37.80.316

Upto 50 km 19.00

11 CSIDC_RC.37.80.316


21.00

12 CSIDC_RC.37.80.317


28.00

13 CSIDC_RC.37.80.318


31.00

14 CSIDC_RC.37.80.319

Above 200 km.

36.00




8/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Engineers Enterprises, Rawabhata Industrial Area, P.O. Birgaon-493221 Raiupr (C.G.) Mob-

9826612012,9425212012 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016.












462011.







9/266



AMENDMENT

Sub:- Amendment in the Rate Contract for RCC Hume Pipe (Valid From dated 30-04-2016 to 29-04-2017) Ref:- 1) Offer letter No. - 4182 Dated 05-07-2016

2) Your acceptance letter Dated 09-07-2016

The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 is made with immediate effect in favour for M/s Bilaspur Cement Products, (Prop. Ramesh Kumar Ubhrani), C/o Shri Sai Tiles & Sanitary Main Road Tarwa Naka, Bilaspur (C.G.)-495001 in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


4/13


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

56 CSIDC_RC.37.80.316


21.00

57 CSIDC_RC.37.80.317


28.00

58 CSIDC_RC.37.80.318


31.00

59 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



56 CSIDC_RC.37.80.316

Upto 50 km 19.00

57 CSIDC_RC.37.80.316


21.00

58 CSIDC_RC.37.80.317


28.00

59 CSIDC_RC.37.80.318


31.00

60 CSIDC_RC.37.80.319

Above 200 km.

36.00




10/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Bilaspur Cement Products, (Prop. Ramesh Kumar Ubhrani), C/o Shri Sai Tiles & Sanitary Main

Road Tarwa Naka, Bilaspur (C.G.)-495001 Mob.-9425219302, 9893968974, Ph.-07752-657901 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016.












462011.







11/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/ DCP/7242 Dated 30-04-2016 is made with immediate effect in favour for M/s Dinesh Cement Products, (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


4/13


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

37 CSIDC_RC.37.80.316


21.00

38 CSIDC_RC.37.80.317


28.00

39 CSIDC_RC.37.80.318


31.00

40 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



37 CSIDC_RC.37.80.316

Upto 50 km 19.00

38 CSIDC_RC.37.80.316


21.00

39 CSIDC_RC.37.80.317


28.00

40 CSIDC_RC.37.80.318


31.00

41 CSIDC_RC.37.80.319

Above 200 km.

36.00




12/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Dinesh Cement Products, (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur

(C.G.)-497001 Ph.-07774-220935, Mob-9826337801 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/ DCP/7242 Dated 30-04-2016.












462011.







13/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/DC/7243 Dated 30-04-2016 is made with immediate effect in favour for M/s Dhanshri And Company, (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


4/13


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

56 CSIDC_RC.37.80.316


21.00

57 CSIDC_RC.37.80.317


28.00

58 CSIDC_RC.37.80.318


31.00

59 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



56 CSIDC_RC.37.80.316

Upto 50 km 19.00

57 CSIDC_RC.37.80.316


21.00

58 CSIDC_RC.37.80.317


28.00

59 CSIDC_RC.37.80.318


31.00

60 CSIDC_RC.37.80.319

Above 200 km.

36.00




14/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Dhanshri And Company, (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.)

Mob-09425580211, Ph.-07774-235611 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/DC/7243 Dated 30-04-2016.












462011.







15/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 is made with immediate effect in favour for M/s Dhanshree Concrete Products, Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


4/13


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

56 CSIDC_RC.37.80.316


21.00

57 CSIDC_RC.37.80.317


28.00

58 CSIDC_RC.37.80.318


31.00

59 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



56 CSIDC_RC.37.80.316

Upto 50 km 19.00

57 CSIDC_RC.37.80.316


21.00

58 CSIDC_RC.37.80.317


28.00

59 CSIDC_RC.37.80.318


31.00

60 CSIDC_RC.37.80.319

Above 200 km.

36.00




16/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Dhanshree Concrete Products, Pawan Kumar Agrawal (Proprietor), Manendragarh Road,

Ambikapur (C.G.) Mob-9425580211 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016.












462011.







17/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SHPRCCP/7245 Dated 30-04-2016 is made with immediate effect in favour for M/s Sinhal Hume Pipe & R.C.C. Products, (Pro Dhiraj Agrawal), Manendragarh Road, Ambikapur, Surguja (C.G.)-497001 in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


4/13


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

38 CSIDC_RC.37.80.316


21.00

39 CSIDC_RC.37.80.317


28.00

40 CSIDC_RC.37.80.318


31.00

41 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



38 CSIDC_RC.37.80.316

Upto 50 km 19.00

39 CSIDC_RC.37.80.316


21.00

40 CSIDC_RC.37.80.317


28.00

41 CSIDC_RC.37.80.318


31.00

42 CSIDC_RC.37.80.319

Above 200 km.

36.00




18/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Sinhal Hume Pipe & R.C.C. Products, (Pro Dhiraj Agrawal), Manendragarh Road, Ambikapur,

Surguja (C.G.)-497001 Mob.-9301871819 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SHPRCCP/7245 Dated 30-04-2016.












462011.







19/266



AMENDMENT


The following amendment in the subject Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 is made with immediate effect in favour for M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


5/15


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



CSIDC_RC.37.80.316

Upto 50 km NIL

57 CSIDC_RC.37.80.316


21.00

58 CSIDC_RC.37.80.317


28.00

59 CSIDC_RC.37.80.318


31.00

60 CSIDC_RC.37.80.319

Above 200 km.

36.00


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT



57 CSIDC_RC.37.80.316

Upto 50 km 19.00

58 CSIDC_RC.37.80.316


21.00

59 CSIDC_RC.37.80.317


28.00

60 CSIDC_RC.37.80.318


31.00

61 CSIDC_RC.37.80.319

Above 200 km.

36.00




20/266Amdt No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. for M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om

Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016












462011.







21/266



AMENDMENT-I

Sub:- Amendment in the Rate Contract for RCC Hume Pipe (Valid From dated 30-04-2016 to 29-04-2017)

The following amendment in the subject Rate Contracts are made with immediate effect in favour all Rate Contract Holders of the item RCC Hume Pipe in and is hereby authorized for supply of such items. This is to be read along with the Rate Contract referred as above.


3/13


Sl. No.

Item Code

Item Description

Rate ( ) FOR Dest. ED & VAT


1 2 3 4


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT


1 2 3 4




22/266No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Bastar Cement Product, Geedam Road, P.O., Pandripani-494001 Jagdalpur, Mob.-9826612012,

9425212012 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016.

2. M/s Grewal Cement Pipe Industries, 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016.

3. M/s Engineers Enterprises, Rawabhata Industrial Area, P.O. Birgaon-493221 Raiupr (C.G.) Mob-9826612012,9425212012 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016.

4. M/s Quality Cement Pipes, 11, 12 Industrial Estate, Bhanpuri, Raipur (C.G.) with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016.

5. M/s Bilaspur Cement Products, (Prop. Ramesh Kumar Ubhrani), C/o Shri Sai Tiles & Sanitary Main Road Tarwa Naka, Bilaspur (C.G.)-495001 Mob.-9425219302, 9893968974, Ph.-07752-657901 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016.

6. M/s Dinesh Cement Products, (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 Ph.-07774-220935, Mob-9826337801 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/ DCP/7242 Dated 30-04-2016.

7. M/s Dhanshri And Company, (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/DC/7243 Dated 30-04-2016.

8. M/s Dhanshree Concrete Products, Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) Mob-9425580211 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016.

9. M/s Sinhal Hume Pipe & R.C.C. Products, (Pro Dhiraj Agrawal), Manendragarh Road, Ambikapur, Surguja (C.G.)-497001 Mob.-9301871819 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SHPRCCP/7245 Dated 30-04-2016.

10. M/s Raigarh Hume and Spun Pipe, Industrial Area, Near Stadium, Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505 [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/RHSP/7246 Dated 30-04-2016.

11. M/s Jai Mahamaya Cement Pipe Industries, Alok Jaiswal, Prop., Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358, [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/JMCP/7247 Dated 30-04-2016.

12. M/s Jai Ambe Cement Products, Vill.-Sargawan, The.-Ambikapur, Distt.-Surguja (C.G.)-497001 Mob.-9826122358, 9425254259 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/JACP/7248 Dated 30-04-2016.

13. M/s Jaiswal Cement Products, Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259, [email protected] with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/JCP/7249 Dated 30-04-2016.

14. M/s Shivshakti Industries, Kaushalya Bhagat Pro., Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001 Mob-9425582023-24 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SSI/7250 Dated 30-04-2016.





23/26619. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in Favour of Rate

Contract Holders of CSIDC,







462011.







24/266



AMENDMENT-I




3/14


Sl. No.

Item Code

Item Description



1 2 3 4


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT


1 2 3 4




25/266No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Star Industries, Jainulabddin, Prop., Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.) Mob.-

09424260460, 09993251066 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/SI/7251 Dated 03-05-2016.

2. M/s Akash Pipe Industries, Mukesh Baghel (Pro.), Dharampara, Mungeli, Bilaspur (C.G.) 495334 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/API/7252 Dated 03-05-2016.












462011.







26/266



AMENDMENT-I




3/14


Sl. No.

Item Code

Item Description



1 2 3 4


Sl. No.

Item Code

Item Description

Rate ( ) ED & VAT


1 2 3 4




27/266No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Copy to, 1. M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om Complex,

Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207 with reference to the Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/ RCCHP/BCPI/7253 Dated 20-05-2016.












462011.







28/266

Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]

SCHEDULE “C”

LIST OF PARALLEL RATE CONTRACT FOR ITEM - RCC HUME PIPE

S.No. Name of Tenderers Valid Up to

Rate Contract No.

1 M/s Bastar Cement Product Geedam Road, P.O. Pandripani-494001 Jagdalpur Mob.-9826612012, 9425212012 [email protected]

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237

2 M/s Grewal Cement Pipe Industries, 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012 [email protected]

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238

3 M/s Engineers Enterprises, Rawabhata Industrial Area, P.O. Birgaon-493221 Raiupr (C.G.) Mob-9826612012,9425212012 [email protected]

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239

4 M/s Quality Cement Pipes, 11, 12 Industrial Estate, Bhanpuri, Raipur (C.G.)

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240

5 M/s Bilaspur Cement Products (Prop. Ramesh Kumar Ubhrani), C/o Shri Sai Tiles & Sanitary Main Road Tarwa Naka, Bilaspur (C.G.)-495001 Mob.-9425219302, 9893968974, Ph.-07752-657901

30-04-2016 To

29-04-2017


6 M/s Dinesh Cement Products, (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 Ph.-07774-220935, Mob-9826337801

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242

7 M/s Dhanshri And Company, (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DC/7243

8 M/s Dhanshree Concrete Products, Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) Mob-9425580211

30-04-2016 To

29-04-2017


9 M/s Sinhal Hume Pipe & R.C.C. Products, (Pro Dhiraj Agrawal), Manendragarh Road, Ambikapur, Surguja (C.G.)-497001 Mob.-9301871819

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245

10 M/s Raigarh Hume and Spun Pipe, Industrial Area, Near Stadium, Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505 [email protected]

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246

29/266

11 M/s Jai Mahamaya Cement Pipe Industries, Alok Jaiswal, Prop., Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358, [email protected]

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCP/7247

12 M/s Jai Ambe Cement Products, Vill.-Sargawan, The.-Ambikapur, Distt.-Surguja (C.G.)-497001 Mob.-9826122358, 9425254259

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248

13 M/s Jaiswal Cement Products, Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259, [email protected]

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249

14 M/s Shivshakti Industries, Kaushalya Bhagat Pro., Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001 Mob-9425582023-24

30-04-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250

15 M/s Star Industries, Jainulabddin, Prop., Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.) Mob.-09424260460, 09993251066

03-05-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251

16 M/s Akash Pipe Industries, Mukesh Baghel (Pro.), Dharampara, Mungeli, Bilaspur (C.G.) 495334

03-05-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252

17 M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207

20-05-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253

30/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 To,

M/s Bastar Cement Product, Geedam Road, P.O. Pandripani-494001 Jagdalpur Mob.-9826612012, 9425212012 [email protected]

Sub :- Rate Contract for the supply of item- RCC Hume Pipe (Valid From dated 30-04-2016 to 29-04-2017) Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/PS-I/125/6004/15-16

(II) Your Offer acceptance along with undertaking submitted on dated 13-04-2016

Dear Sir, You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction. You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment . SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties / Taxes. 2. Annexure -“B” Technical Particulars of Item RCC Hume Pipe 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report. Encl. 12 pages

Yours faithfully,


Incharge Marketing For and on behalf of the purchaser

named in CSIDC Form No.2

31/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







32/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016

SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Bastar Cement Product

THE FIRM Geedam Road, P.O. Pandripani-494001 Jagdalpur Mob.-9826612012, 9425212012 [email protected]

(b) NAME AND FULL ADDRESS OF :- M/s Bastar Cement Product MANUFACTURER Geedam Road,

P.O. Pandripani-494001 Jagdalpur Mob.-9826612012, 9425212012

[email protected] (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.

Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT : Extra, if applicable

TIN No. 22901300645 Address:- M/s Bastar Cement Product, Geedam Road, P.O. Pandripani-494001 Jagdalpur Mob.-9826612012, 9425212012


Incharge Marketing

Sl. No.

Item Code Item Description Rate ( ) FOR Dest.

ED & VAT Extra As Applicable (Rs per Meter)

1 2 3 4 Schedule- 3: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes

suitable for flush joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment. Nominal Diameter of Pipes in mm.

1 CSIDC_RC.37.80.219 450 1029.00 2 CSIDC_RC.37.80.220 500 1132.00 3 CSIDC_RC.37.80.221 600 1451.00 4 CSIDC_RC.37.80.222 700 1646.00 5 CSIDC_RC.37.80.223 800 2205.00 6 CSIDC_RC.37.80.224 900 2878.00 7 CSIDC_RC.37.80.225 1000 2991.00 8 CSIDC_RC.37.80.226 1100 3396.00 9 CSIDC_RC.37.80.227 1200 4291.00 Schedule - 8 Transportation Charges: Item Description Distance in km./ Transportation Charges in %

on the Total Cost of Pipes/ Collars

10 CSIDC_RC.37.80.316 Above 50 km. upto 100 km. 21.00 11 CSIDC_RC.37.80.317 Above 100 km. upto 150 km. 28.00 12 CSIDC_RC.37.80.318 Above 150 km. upto 200 km. 31.00 13 CSIDC_RC.37.80.319 Above 200 km. 36.00

33/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 3647765.00 2013-14 . 5681490.00 2014-15 . 4352307.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Jagdalpur

Description Capacity/Annum RCC Hume Pipe 66175 CFT

9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Jagdalpur DTIC-22/015/11/00115 Dated 12-03-2009 (The firm shall renew the license well in time No, supply order to be

issued by DDO’s during expiry period) 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding

Officers (DDOs). 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each

consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.

17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) OR

ADG (Q & A), DGS&D, New Delhi OR

Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1St Floor, in front of Bank of India Indrapuri Bhopal, (M.P.) OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah) OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)


34/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) OR

Dy. Director (Q&A), DGS&D, Bhilai (C.G.) OR


19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s Bastar Cement Product INSPECTION Geedam Road,

P.O. Pandripani-494001 Jagdalpur Mob.-9826612012, 9425212012

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.

21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause

7,the Purchaser/DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3% . The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. SPECIAL NOTE : 1. Purchasing Departments/end user will ensure to sending the

copy of every Purchase order to this office. 2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel. 3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh. 5. Purchasing Department/end user will ensure to issue the Purchase Order in accordance with the Store Purchase Rules-2002 (As Amended) vide Clause No.-13



Annexure –B

CSIDC/MKD/TECH/2015-16/41 TECHNICAL PARTICULARS OF R.C.C. HUME PIPES

TSC 17-12-2015

This Specification covers the requirements for Non-Pressure Reinforced Precast Concrete Pipes (Spun) used for culverts, sewers, irrigation etc.

The Concrete Pipes shall be conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment with regards to Design /Dimensions / Tolerances / Workmanship & Finish / Materials used for making the Pipes. The Pipes shall be manufactured by spinning process. The ends of the concrete pipes shall be suitable for flush joints or collar joints or suitable for Socket & Spigot, roll on joints or confined gasket joints as per the requirements of the purchaser.

The Pipes shall be of the following Sizes & Classification:

Schedule- 1: Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2, with ends of the pipes suitable for collar joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment

Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800.

1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP2 shall be as per the Table 2 of IS: 458/2003(Fourth Revision), with up-to-date amendment. 2. Tenderers may also quote rates separately for the Collars. Dimensions and Design requirements of Reinforced Concrete Collars for Pipes of Class NP2 shall be as per the Table 21 of IS: 458/2003, with up-to-date amendment. Schedule- 2: Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100,1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP2 shall be as per the Table 2 of IS: 458/2003(Fourth Revision) with up-to-date amendment. 2. Spigot & Socket dimensions of NP2 Class Pipes shall be as per Table 13 of IS: 458/2003(Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date amendment. Schedule- 3: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for flush joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment.

(S.B. Parate) Incharge PS-I

36/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date

amendment. Schedule- 5: Reinforced Concrete, Heavy duty, Non-pressure Pipes, Class: NP4, with ends of the pipes suitable for flush joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800.

1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP4 shall be as per the Table 6 of IS: 458/2003 (Fourth Revision) with up-to-date amendment.

Schedule- 6: Reinforced Concrete, Heavy duty, Non-pressure Pipes, Class: NP4, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000,1100,1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP4 shall be as per the Table 6 of IS: 458/2003(Fourth Revision) with up-to-date amendment.

(S.B. Parate)

Incharge PS-I

37/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:

458/2003(Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date

amendment. Schedule-7: Reinforced Concrete Collar for Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2 conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment. Reinforced Concrete Collar for the Pipes, Class: NP2, size (Nominal Diameter in mm) , is as per below: 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000,1100,1200, 1400, 1600 & 1800. 1. Dimensions and Design requirements of Reinforced Concrete Collar for Pipes of Class NP2 shall be as per the Table 21 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule - 8 Transportation Charges: Sub Item Code No.

Item Description Distance in km. Transportation Charges in % on the Total Cost of Pipes/ Collars

1 Upto 50 km. 2 Above 50 km. upto 100 km. 3 Above 100 km. upto 150 km. 4 Above 150 km. upto 200 km. 5 Above 200 km. Inspection & Testing: As per prevailing practice, the following Review of Reports shall be carried out. Review of Reports: The following Reports shall be submitted to the Inspecting Officer at the time of Inspection for review:

During manufacture, Compressive Strength Tests shall be conducted by the manufacturers on 150 mm Concrete Cubes in accordance with the relevant requirements of IS: 456/2000 with up-to-date amendment and IS: 516/1959 (Reaffirmed 1999) with up-to-date amendment , as stipulated in clause 5.5.3 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. The manufacturer shall submit the results of Compressive Strength Tests of Concrete Cubes made from the Concrete used for the pipes. Alternatively, if the manufacturers do not have the facilities for Compressive Strength Test on Concrete Cubes, they shall get the Test done at CSIDC laboratory at least once in a month and submit the report to the Inspecting Officer for review. 1. Manufacturer shall submit his own Certificate for materials of construction used in the pipes. 2. Manufacturer shall submit Test Certificate for the Steel used for Reinforcement. 3. Manufacture’s Test Repot of Rubber Rings shall be submitted for review (incase of Pipes with Socket & Spigot ends). TESTS: As per prevailing practice, the following Tests / Checking shall be carried out.


38/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the

purchaser and the supplier. However, the recommended length above 300 mm Nominal Diameter is 2.5 meters.

4. Curing of the pipes shall be done as per the Clause 7.4 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 5. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date amendment. 6. The following information shall be shall be clearly marked on the each Finished Pipe. a. Size of Pipe, b. Class of Pipe, and c. Name of manufacture. 7. The supplier shall guarantee the Pipes and Collars for a period of 12 months from the date of receipt of the materials by the consignee. 8. For Reinforced Concrete Pipes Rates must be quoted on the basis of Per Meter length and in the case of Collars Rates shall be quoted on the basis of Per Piece. (The cost of the Rubber Ring shall be included in the Rate per Meter length of the Pipe. No extra payment Towards the supply of Rubber rings will be made) as per the prevailing practice, Transportation cost for Pipes & Collars shall be quoted separately.

Recommended by Technical Specification Committee Dated 17-12-2015

(S.B. Parate)

Incharge PS-I

39/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7237 Dated 30-04-2016

SCHEDULE ‘B’

(SPECIAL CONDITION OF CONTRACT) Item- RCC Hume Pipe

Rate Contract Will be governed by the Terms & Conditions laid down in the CSIDC FORM NO. 1 & 2



SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017




SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.


43/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 To,

M/s Grewal Cement Pipe Industries, 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012 [email protected]


(III) Your Offer acceptance along with undertaking submitted on dated 13-04-2016


Yours faithfully,




44/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.






7. (i) Engineer-In-Chief, Water Resources Department, Sihawa Bhawan, Civil Lines, Raipur (ii) Engineer in Chief PHED C.G. Neer Bhawan, Raipur (iii) Engineer-In-Chief, Rural Engineering Services, Vikas Bhawan, Civil Lines, Raipur (C.G.) (iv) Engineer in Chief PWD C.G.Civil lines Raipur (C.G)





462011.







45/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Grewal Cement Pipe Industries,

THE FIRM 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012

[email protected] (b) NAME AND FULL ADDRESS OF :- M/s Grewal Cement Pipe Industries, MANUFACTURER 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012 [email protected] (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


TIN No. 22631300648 Address:- M/s Grewal Cement Pipe Industries, 31, Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012


Incharge Marketing

Sl. No.








46/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 13670511.00 2013-14 . 13721622.00 2014-15 . 13317466.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Raipur

Description Capacity/Annum RCC Hume Pipe 125000 CU.FT


FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur DTIC-22/011/11/00654 Dated 18-09-2008 (The firm shall renew the license well in time No, supply order to be







18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) OR



47/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 Manager (Operation) Indian Register of Shipping Senior MIG-2,

Secter A, 1St Floor, in front of Bank of India Indrapuri Bhopal, (M.P.) OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah) OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)


ARE TO BE OFFERED FOR M/s Grewal Cement Pipe Industries, INSPECTION 31, Industrial Area,

P.O. Birgaon-493221 Raipur (C.G.) Mob.-9826612012, 9425212012 [email protected]








Annexure –B


TSC 17-12-2015








49/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

50/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







51/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

52/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/GCPI/7238 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





56/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 To,

M/s Engineers Enterprises, Rawabhata Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob-9826612012,9425212012 [email protected]


(IV) Your Offer acceptance along with undertaking submitted on dated 13-04-2016


Yours faithfully,




57/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







58/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Engineers Enterprises, THE FIRM Rawabhata Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob-9826612012,9425212012

[email protected] (b) NAME AND FULL ADDRESS OF :- M/s Engineers Enterprises, MANUFACTURER Rawabhata Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob-9826612012,9425212012 [email protected] (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


TIN No. 22811300646 Address:- M/s Engineers Enterprises, Rawabhata Industrial Area, P.O. Birgaon-493221 Raipur (C.G.) Mob-9826612012,9425212012


Incharge Marketing

Sl. No.








59/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . NM 2013-14 . NM 2014-15 . NM b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Raipur

Description Capacity/Annum RCC Hume Pipe 60000 CU.FT


FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur DTIC-22/011/11/00656 Dated 18-09-2008 (The firm shall renew the license well in time No, supply order to be










60/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 Manager (Operation) Indian Register of Shipping Senior MIG-2,



ARE TO BE OFFERED FOR M/s Engineers Enterprises, INSPECTION Rawabhata Industrial Area,

P.O. Birgaon-493221 Raipur (C.G.) Mob-9826612012,9425212012 [email protected]








Annexure –B


TSC 17-12-2015








62/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

63/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







64/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

65/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/EE/7239 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





69/266

7hhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016 To,

M/s Quality Cement Pipes, 11, 12 Industrial Estate, Bhanpuri, Raipur (C.G.)


(V) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




70/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







71/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Quality Cement Pipes, THE FIRM 11, 12 Industrial Estate, Bhanpuri, Raipur (C.G.) (b) NAME AND FULL ADDRESS OF :- M/s Quality Cement Pipes, MANUFACTURER 11, 12 Industrial Estate, Bhanpuri, Raipur (C.G.) (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.

Note :- Technical particulars as per Annexure B enclosed 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable


Sl. No.

Item Code Item Description Offer Rate FOR Dest.




1 CSIDC_RC.37.80.219 450 1029.00 2 CSIDC_RC.37.80.220 500 1132.00 3 CSIDC_RC.37.80.221 600 1451.00 4 CSIDC_RC.37.80.224 900 2878.00 5 CSIDC_RC.37.80.225 1000 2991.00 6 CSIDC_RC.37.80.227 1200 4291.00 7 CSIDC_RC.37.80.228 1400 5793.00 8 CSIDC_RC.37.80.229 1600 6904.00 Schedule- 5: Reinforced Concrete, Heavy duty, Non-pressure Pipes, Class: NP4, with ends of the pipes


9 CSIDC_RC.37.80.255 200 297.00 10 CSIDC_RC.37.80.257 250 367.00 11 CSIDC_RC.37.80.262 500 1215.00

Schedule-7: Reinforced Concrete Collar for Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2 conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment. Reinforced Concrete Collar for the Pipes, Class: NP2, size (Nominal Diameter in mm) , is as per below:

12 CSIDC_RC.37.80.311 1200 566.00 13 Schedule - 8 Transportation Charges: Item Description Distance in km./ Transportation Charges in % on

the Total Cost of Pipes/ Collars


72/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016 6. SALES TAX /VAT : Extra, if applicable

TIN No. 22511301296 Address:- M/s Quality Cement Pipes, 11, 12 Industrial Estate, Bhanpuri, Raipur (C.G.)

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 11131635.14 2013-14 . 12386422.39 2014-15 . 11492873.75 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Raipur

Description Capacity/Annum RCC Hume Pipe and four other

items 80000 CU.FT


FIRM 13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur DTIC-22/011/11/00941Dated 16-07-2009 (The firm shall renew the license well in time No, supply order to be






Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1St Floor, in front of Bank of India Indrapuri Bhopal, (M.P.) OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah) OR



Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)





ARE TO BE OFFERED FOR M/s Quality Cement Pipes, INSPECTION 11, 12 Industrial Estate,

Bhanpuri, Raipur (C.G.)








Annexure –B


TSC 17-12-2015








75/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

76/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







77/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

78/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/QCP/7240 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





82/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 To,

M/s Bilaspur Cement Products (Prop. Ramesh Kumar Ubhrani), C/o Shri Sai Tiles & Sanitary, Main Road Tarwa Naka, Bilaspur (C.G.)-495001 Mob.-9425219302, 9893968974, Ph.-07752-657901


(VI) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




83/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.









For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Bilaspur Cement Products THE FIRM (Prop. Ramesh Kumar Ubhrani),

C/o Shri Sai Tiles & Sanitary, Main Road Tarwa Naka, Bilaspur (C.G.)-495001 Mob.-9425219302, 9893968974,

Ph.-07752-657901 (b) NAME AND FULL ADDRESS OF :- M/s Bilaspur Cement Products MANUFACTURER (Prop. Ramesh Kumar Ubhrani),

C/o Shri Sai Tiles & Sanitary, Main Road Tarwa Naka, Bilaspur (C.G.)-495001 Mob.-9425219302, 9893968974,

Ph.-07752-657901 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Incharge Marketing

Sl. No.



1 2 3 4 R.C.C.Hume Pipe Schedule- 1: Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2, with

ends of the pipes suitable for collar joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment Nominal Diameter of Pipes in mm.

7 CSIDC_RC.37.80.177 450 440.00 8 CSIDC_RC.37.80.179 600 746.00 10 CSIDC_RC.37.80.181 800 1281.00 11 CSIDC_RC.37.80.182 900 1132.00 13 CSIDC_RC.37.80.185 1200 1471.00

Schedule- 3: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for flush joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment. Nominal Diameter of Pipes in mm.


Schedule- 5: Reinforced Concrete, Heavy duty, Non-pressure Pipes, Class: NP4, with ends of the pipes suitable for flush joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment. Nominal Diameter of Pipes in mm.




TIN No. 22394300893 Address:- M/s Bilaspur Cement Products (Prop. Ramesh Kumar Ubhrani), C/o Shri Sai Tiles & Sanitary, Main Road Tarwa Naka, Bilaspur (C.G.)-495001

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 9339862.00 2013-14 . 11184460.00 2014-15 . 8181747.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Bilaspur

Description Capacity/Annum RCC Hume Pipe 15000 Nos


FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Bilaspur DTIC-22/007/11/00886 Dated 05-06-2013 (The firm shall renew the license well in time No, supply order to be

issued by DDO’s during expiry period)


Incharge Marketing



Schedule - 8 Transportation Charges: Item Description Distance in km./ Transportation Charges in % on the Total Cost of Pipes/ Collars


86/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding










ARE TO BE OFFERED FOR M/s Bilaspur Cement Products INSPECTION (Prop. Ramesh Kumar Ubhrani),

C/o Shri Sai Tiles & Sanitary, Main Road Tarwa Naka, Bilaspur (C.G.)-495001


Incharge Marketing

87/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be

paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.







Annexure –B


TSC 17-12-2015








89/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

90/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







91/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCP/7241 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I


SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





96/266

7hhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]

No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 To,

M/s Dinesh Cement Products, (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 Ph.-07774-220935, Mob-9826337801


(VII) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




97/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







98/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Dinesh Cement Products, THE FIRM (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 Ph.-07774-220935, Mob-9826337801 (b) NAME AND FULL ADDRESS OF :- M/s Dinesh Cement Products, MANUFACTURER (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 Ph.-07774-220935, Mob-9826337801 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Sl. No.





1 CSIDC_RC.37.80.179 600 746.00 2 CSIDC_RC.37.80.181 800 1281.00 3 CSIDC_RC.37.80.182 900 1132.00 4 CSIDC_RC.37.80.183 1000 1189.00 5 CSIDC_RC.37.80.185 1200 1471.00 Schedule- 2: Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2, with ends of the pipes

suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm.

6 CSIDC_RC.37.80.191 150 41.00 7 CSIDC_RC.37.80.192 200 51.00 8 CSIDC_RC.37.80.195 300 75.00 9 CSIDC_RC.37.80.198 450 138.00 10 CSIDC_RC.37.80.200 600 213.00 11 CSIDC_RC.37.80.202 800 239.00 12 CSIDC_RC.37.80.203 900 354.00 13 CSIDC_RC.37.80.204 1000 371.00 14 CSIDC_RC.37.80.206 1200 693.00


15 CSIDC_RC.37.80.213 200 259.00 16 CSIDC_RC.37.80.214 225 270.00 17 CSIDC_RC.37.80.215 250 303.00 18 CSIDC_RC.37.80.216 300 303.00 19 CSIDC_RC.37.80.217 350 407.00 20 CSIDC_RC.37.80.218 400 453.00 21 CSIDC_RC.37.80.219 450 1029.00 22 CSIDC_RC.37.80.220 500 1132.00 23 CSIDC_RC.37.80.221 600 1451.00 24 CSIDC_RC.37.80.222 700 1646.00

99/266Incharge Marketing



TIN No. 22665003752 Address:- M/s Dinesh Cement Products, (Mr. Ramchandra Agrawal & Deepak Kumar), M.G. Road, Ambikapur (C.G.)-497001 Ph.-07774-220935, Mob-9826337801

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 5858087.00 2013-14 . 4136891.00 2014-15 . 1495210.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Ambikapur



FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Ambikapur DTIC-22/002/11/00107 Dated 11-02-2008 (The firm shall renew the license well in time No, supply order to be

issued by DDO’s during expiry period)


25 CSIDC_RC.37.80.223 800 2205.00 26 CSIDC_RC.37.80.224 900 2878.00 27 CSIDC_RC.37.80.225 1000 2991.00 28 CSIDC_RC.37.80.226 1100 3396.00 29 CSIDC_RC.37.80.227 1200 4291.00 30 CSIDC_RC.37.80.228 1400 5793.00 31 CSIDC_RC.37.80.229 1600 6904.00 32 CSIDC_RC.37.80.230 1800 7638.00


33 CSIDC_RC.37.80.258 300 407.00 34 CSIDC_RC.37.80.259 350 453.00 35 CSIDC_RC.37.80.267 1000 3226.00 36 CSIDC_RC.37.80.269 1200 4301.00



101/266Incharge Marketing

102/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding










ARE TO BE OFFERED FOR M/s Dinesh Cement Products, INSPECTION (Mr. Ramchandra Agrawal & Deepak Kumar),

M.G. Road, Ambikapur (C.G.)-497001



Incharge Marketing

103/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause






Annexure –B


TSC 17-12-2015








105/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

106/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







107/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

108/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7242 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





112/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016 To,

M/s Dhanshri And Company, (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611


(VIII) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




113/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







114/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Dhanshri And Company, THE FIRM (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611 (b) NAME AND FULL ADDRESS OF :- M/s Dhanshri And Company, MANUFACTURER (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Incharge Marketing

Sl. No.



1 2 3 4 R.C.C.Hume Pipe Schedule- 1: Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2, with ends

of the pipes suitable for collar joints conforming to IS: 458/2003 (Fourth Revision) with up-to-date amendment Nominal Diameter of Pipes in mm.

1 CSIDC_RC.37.80.169 100 103.00 2 CSIDC_RC.37.80.170 150 205.00 3 CSIDC_RC.37.80.171 200 198.00 4 CSIDC_RC.37.80.172 225 229.00 5 CSIDC_RC.37.80.173 250 237.00 6 CSIDC_RC.37.80.177 450 440.00 7 CSIDC_RC.37.80.178 500 588.00 8 CSIDC_RC.37.80.179 600 746.00 9 CSIDC_RC.37.80.180 700 885.00 10 CSIDC_RC.37.80.181 800 1281.00 11 CSIDC_RC.37.80.182 900 1132.00 12 CSIDC_RC.37.80.183 1000 1189.00 13 CSIDC_RC.37.80.185 1200 1471.00


14 CSIDC_RC.37.80.211 100 128.00 15 CSIDC_RC.37.80.213 200 259.00 16 CSIDC_RC.37.80.214 225 270.00 17 CSIDC_RC.37.80.215 250 303.00 18 CSIDC_RC.37.80.216 300 303.00 19 CSIDC_RC.37.80.219 450 1029.00 20 CSIDC_RC.37.80.220 500 1132.00 21 CSIDC_RC.37.80.221 600 1451.00 22 CSIDC_RC.37.80.222 700 1646.00 23 CSIDC_RC.37.80.223 800 2205.00 24 CSIDC_RC.37.80.224 900 2878.00 25 CSIDC_RC.37.80.225 1000 2991.00



TIN No. 22685001413 Address:- M/s Dhanshri And Company, (Pro. Sarita Agrawal), Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . NM 2013-14 . NM 2014-15 . NM b. MONETARY LIMIT : NM




31 CSIDC_RC.37.80.253 100 147.00 32 CSIDC_RC.37.80.254 150 198.00 33 CSIDC_RC.37.80.255 200 297.00 34 CSIDC_RC.37.80.256 225 318.00 35 CSIDC_RC.37.80.257 250 367.00 36 CSIDC_RC.37.80.258 300 407.00 37 CSIDC_RC.37.80.262 500 1215.00 38 CSIDC_RC.37.80.264 700 1698.00 39 CSIDC_RC.37.80.267 1000 3226.00 40 CSIDC_RC.37.80.269 1200 4301.00 41 CSIDC_RC.37.80.271 1600 7357.00


42 CSIDC_RC.37.80.295 100 35.00 43 CSIDC_RC.37.80.296 150 41.00 44 CSIDC_RC.37.80.297 200 51.00 45 CSIDC_RC.37.80.298 225 60.00 46 CSIDC_RC.37.80.299 250 62.00 47 CSIDC_RC.37.80.300 300 75.00 48 CSIDC_RC.37.80.303 450 138.00 49 CSIDC_RC.37.80.304 500 184.00 50 CSIDC_RC.37.80.305 600 206.00 51 CSIDC_RC.37.80.306 700 222.00 52 CSIDC_RC.37.80.307 800 239.00 53 CSIDC_RC.37.80.308 900 309.00 54 CSIDC_RC.37.80.309 1000 371.00 55 CSIDC_RC.37.80.311 1200 566.00



116/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016 c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Ambikapur



FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Ambikapur-Surguja DTIC-22/002/11/00108 Dated 19-02-2008 (The firm shall renew the license well in time No, supply order to be

issued by DDO’s during expiry period 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding








Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1St Floor, in front of Bank of India Indrapuri Bhopal, (M.P.) OR


Incharge Marketing


Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah) OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)


ARE TO BE OFFERED FOR M/s Dhanshri And Company, INSPECTION (Pro. Sarita Agrawal),

Deviganj Road, Ambikapur, Surguja (C.G.) Mob-09425580211, Ph.-07774-235611








Annexure –B


TSC 17-12-2015








119/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

120/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







121/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

122/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



125/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/D&C/7243 Dated 30-04-2016






Reasons





126/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 To,

M/s Dhanshree Concrete Products, Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) Mob-9425580211


(IX) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




127/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.









For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Dhanshree Concrete Products, THE FIRM Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) Mob-9425580211 (b) NAME AND FULL ADDRESS OF :- M/s Dhanshree Concrete Products, MANUFACTURER (Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) Mob-9425580211 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Incharge Marketing

Sl. No.










TIN No. 22775003158 Address:- M/s Dhanshree Concrete Products, Pawan Kumar Agrawal (Proprietor), Manendragarh Road, Ambikapur (C.G.) Mob-9425580211

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . NM 2013-14 . NM 2014-15 . NM b. MONETARY LIMIT : NM









130/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Ambikapur



FIRM


issued by DDO’s during expiry period 14 BIS LICENSE : Not Applicable 15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding








Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1St Floor, in front of Bank of India Indrapuri Bhopal, (M.P.) OR


Incharge Marketing


Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah) OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)


ARE TO BE OFFERED FOR M/s Dhanshree Concrete Products, INSPECTION Pawan Kumar Agrawal (Proprietor),

Manendragarh Road, Ambikapur (C.G.)

Mob-9425580211








Annexure –B


TSC 17-12-2015








133/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

134/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







135/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/DCP/7244 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I


SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





140/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 To,

M/s Sinhal Hume Pipe & R.C.C. Products, (Pro Dhiraj Agrawal), Manendragarh Road, Ambikapur, Surguja (C.G.)-497001 Mob.-9301871819


(X) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




141/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







142/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Sinhal Hume Pipe & R.C.C. Products, THE FIRM (Pro Dhiraj Agrawal),

Manendragarh Road, Ambikapur, Surguja (C.G.)-497001

Mob.-9301871819 (b) NAME AND FULL ADDRESS OF :- M/s Sinhal Hume Pipe & R.C.C. Products, MANUFACTURER (Pro Dhiraj Agrawal),

Manendragarh Road, Ambikapur, Surguja (C.G.)-497001

Mob.-9301871819 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Sl. No.





1 CSIDC_RC.37.80.179 600 746.00 2 CSIDC_RC.37.80.181 800 1281.00 3 CSIDC_RC.37.80.182 900 1132.00 4 CSIDC_RC.37.80.183 1000 1189.00 5 CSIDC_RC.37.80.185 1200 1471.00 Schedule- 2: Reinforced Concrete, Light duty, Non-pressure Pipes, Class: NP2, with ends of the pipes

suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm.

6 CSIDC_RC.37.80.191 150 41.00 7 CSIDC_RC.37.80.192 200 51.00 8 CSIDC_RC.37.80.195 300 75.00 9 CSIDC_RC.37.80.198 450 138.00 10 CSIDC_RC.37.80.200 600 213.00 11 CSIDC_RC.37.80.202 800 239.00 12 CSIDC_RC.37.80.203 900 354.00 13 CSIDC_RC.37.80.204 1000 371.00 14 CSIDC_RC.37.80.206 1200 693.00




Note :- Technical particulars as per Annexure B enclosed

4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT : Extra, if applicable

TIN No. 22625000961 Address:- M/s Sinhal Hume Pipe & R.C.C. Products, (Pro Dhiraj Agrawal), Manendragarh Road, Ambikapur, Surguja (C.G.)-497001 Mob.-9301871819

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . NM 2013-14 . NM 2014-15 . NM b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Ambikapur-

Surguja Description Capacity/Annum

RCC Hume Pipe 6000 Nos 9. SLAB DISCOUNT (IF ANY) : Nil 10. PRICES : Prices are Firm and Final


Incharge Marketing



33 CSIDC_RC.37.80.258 300 407.00 34 CSIDC_RC.37.80.259 350 453.00 35 CSIDC_RC.37.80.267 1000 3226.00 36 CSIDC_RC.37.80.269 1200 4301.00 37 Schedule - 8 Transportation Charges: Item Description Distance in km./ Transportation Charges in %



144/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER 12. STATUS OF RC HOLDING : Manufacturer

FIRM












145/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 19. PLACE WHERE THE STORES At Manufacturer’s Factory at

ARE TO BE OFFERED FOR M/s Sinhal Hume Pipe & R.C.C. Products, INSPECTION (Pro Dhiraj Agrawal),

Manendragarh Road, Ambikapur, Surguja (C.G.)-497001 Mob.-9301871819

20 INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to be








Annexure –B


TSC 17-12-2015








147/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

148/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







149/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

150/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SHPRCCP/7245 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



Incharge Marketing







Reasons





154/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 To,

M/s Raigarh Hume and Spun Pipe, Industrial Area, Near Stadium, Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505 [email protected]


(XI) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




155/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







156/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Raigarh Hume and Spun Pipe, THE FIRM Industrial Area, Near Stadium, Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505 [email protected] (b) NAME AND FULL ADDRESS OF :- M/s Raigarh Hume and Spun Pipe, MANUFACTURER Industrial Area, Near Stadium, Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505 [email protected] (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.

Note :- Technical particulars as per Annexure B enclosed (Subas Chandra Bhagat)

Incharge Marketing

Sl. No.





1 CSIDC_RC.37.80.216 300 303.00 2 CSIDC_RC.37.80.219 450 1029.00 3 CSIDC_RC.37.80.220 500 1132.00 4 CSIDC_RC.37.80.221 600 1451.00 5 CSIDC_RC.37.80.222 700 1646.00 6 CSIDC_RC.37.80.224 900 2878.00 7 CSIDC_RC.37.80.225 1000 2991.00 8 CSIDC_RC.37.80.227 1200 4291.00 Schedule- 5: Reinforced Concrete, Heavy duty, Non-pressure Pipes, Class: NP4, with ends of the pipes





157/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT : Extra, if applicable

TIN No. 22375100087 Address:- M/s Raigarh Hume and Spun Pipe,

Industrial Area, Near Stadium, Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505

[email protected] 7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 3647765.00 2013-14 . 5681490.00 2014-15 . 4352307.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Raigarh



FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raigarh DTIC-22/004/11/00343 Dated 20-12-2010 (The firm shall renew the license well in time No, supply order to be





158/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 17 INSPECTION AUTHORITY : CSIDC (DEPARTMENTAL TECHNICAL WING) OR







ARE TO BE OFFERED FOR M/s Raigarh Hume and Spun Pipe, INSPECTION Industrial Area, Near Stadium,

Raigarh (C.G.) Mob.-9300676323, 9406058405, Ph.-07762-223505 [email protected]






159/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 22. SPECIAL NOTE : 1. Purchasing Departments/end user will ensure to sending the




Annexure –B


TSC 17-12-2015








161/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

162/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







163/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

164/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/RHSP/7246 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017









Reasons





168/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 To,

M/s Jai Mahamaya Cement Pipe Industries, Alok Jaiswal, Prop., Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358, [email protected]


(XII) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




169/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







170/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Jai Mahamaya Cement Pipe Industries,

THE FIRM Alok Jaiswal, Prop., Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358,

[email protected] (b) NAME AND FULL ADDRESS OF :- M/s Jai Mahamaya Cement Pipe Industries, MANUFACTURER Alok Jaiswal, Prop., Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358, [email protected] (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Incharge Marketing

Sl. No.










TIN No. 22715002803 Address:- M/s Jai Mahamaya Cement Pipe Industries, Alok Jaiswal, Prop., Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358, [email protected]

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 13915642.00 2013-14 . 18206139.00 2014-15 . 10086802.00


23 CSIDC_RC.37.80.224 900 2878.00 24 CSIDC_RC.37.80.225 1000 2991.00 25 CSIDC_RC.37.80.226 1100 3396.00 26 CSIDC_RC.37.80.227 1200 4291.00 27 CSIDC_RC.37.80.228 1400 5793.00 28 CSIDC_RC.37.80.229 1600 6904.00 29 CSIDC_RC.37.80.230 1800 7638.00







172/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Surguja



FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Surguja DTIC-22/002/11/00117 Dated 25-02-2008 (The firm shall renew the license well in time No, supply order to be










Incharge Marketing

173/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 Manager (Operation) Indian Register of Shipping Senior MIG-2,



ARE TO BE OFFERED FOR M/s Jai Mahamaya Cement Pipe Industries, INSPECTION Alok Jaiswal, Prop., Mission Chowk,

Ring Road, Ambikapur, Distt.-Surguja (C.G.) 497001 Mob-9826122358, [email protected]








Annexure –B


TSC 17-12-2015








175/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

176/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







177/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

178/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JMCPI/7247 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”

LIST OF PARALLEL RATE CONTRACT FOR ITEM- RCC HUME PIPE


Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



Incharge Marketing







Reasons





182/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 To,

M/s Jai Ambe Cement Products, Vill.-Sargawan, The.-Ambikapur, Distt.-Surguja (C.G.)-497001 Mob.-9826122358, 9425254259


(XIII) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




183/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







184/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Jai Ambe Cement Products,

THE FIRM Vill.-Sargawan, The.-Ambikapur, Distt.-Surguja (C.G.)-497001

Mob.-9826122358, 9425254259 (b) NAME AND FULL ADDRESS OF :- M/s Jai Ambe Cement Products, MANUFACTURER Vill.-Sargawan, The.-Ambikapur,

Distt.-Surguja (C.G.)-497001 Mob.-9826122358, 9425254259 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Incharge Marketing

Sl. No.










TIN No. 22935003167 Address:- M/s Jai Ambe Cement Products, Vill.-Sargawan, The.-Ambikapur, Distt.-Surguja (C.G.)-497001 Mob.-9826122358, 9425254259

7. DELIVERY PERIOD : 45 Days









186/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 8. a. ANNUAL TURN OVER/ : 2012-13 . 10787348.00 2013-14 . 13846409.00 2014-15 . 9833694.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Surguja



FIRM









187/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) OR




ARE TO BE OFFERED FOR M/s Jai Ambe Cement Products, INSPECTION Vill.-Sargawan, The.-Ambikapur,

Distt.-Surguja (C.G.)-497001 Mob.-9826122358, 9425254259








Annexure –B


TSC 17-12-2015








189/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

190/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







191/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

192/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JACP/7248 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



Incharge Marketing







Reasons





196/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 To,

M/s Jaiswal Cement Products, Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259, [email protected]


(XIV) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




197/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







198/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Jaiswal Cement Products, THE FIRM Mission Chowk, Ring Road,

Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259,

[email protected] (b) NAME AND FULL ADDRESS OF :- M/s Jaiswal Cement Products, MANUFACTURER Mission Chowk, Ring Road,

Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259,

[email protected] (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Incharge Marketing

Sl. No.










TIN No. 22365001201 Address:- M/s Jaiswal Cement Products, Mission Chowk, Ring Road, Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259, [email protected]










200/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 8. a. ANNUAL TURN OVER/ : 2012-13 . 11775619.00 2013-14 . 14008858.00 2014-15 . 14592026.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Surguja



FIRM









201/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) OR




ARE TO BE OFFERED FOR M/s Jaiswal Cement Products, INSPECTION Mission Chowk, Ring Road,

Ambikapur, Distt.-Surguja (C.G.) Mob-9826122358, 9425254259, [email protected]








Annexure –B


TSC 17-12-2015








203/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

204/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







205/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

206/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/JCP/7249 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



Incharge Marketing







Reasons





210/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 To,

M/s Shivshakti Industries, Kaushalya Bhagat Pro., Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001 Mob-9425582023-24


(XV) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




211/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







212/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Shivshakti Industries, THE FIRM Kaushalya Bhagat Pro.,

Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001

Mob-9425582023-24 (b) NAME AND FULL ADDRESS OF :- M/s Shivshakti Industries, MANUFACTURER Kaushalya Bhagat Pro.,

Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001

Mob-9425582023-24 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 30-04-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Sl. No.










TIN No. 22595004130 Address:- M/s Shivshakti Industries, Kaushalya Bhagat Pro., Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001 Mob-9425582023-24










214/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 8. a. ANNUAL TURN OVER/ : 2012-13 . 40.00 lacs 2013-14 . 50.00 Lacs 2014-15 . 60.00 Lacs b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Surguja



FIRM









215/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 18 QUALITY ASSURANCE: CSIDC (DEPARTMENTAL TECHNICAL WING) OR




ARE TO BE OFFERED FOR M/s Shivshakti Industries, INSPECTION Kaushalya Bhagat Pro.,

Kena Bandh, Bouripara, Ambikapur, Distt.-Surguja (C.G.)-497001 Mob-9425582023-24








Annexure –B


TSC 17-12-2015








217/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

218/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







219/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

220/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SSI/7250 Dated 30-04-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



Incharge Marketing







Reasons





224/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016 To,

M/s Star Industries, Jainulabddin, Prop., Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.) Mob.-09424260460, 09993251066


(XVI) Your Offer acceptance along with undertaking submitted on dated 25-04-2016


Yours faithfully,




225/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







226/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Star Industries, THE FIRM Jainulabddin, Prop.,

Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.)

Mob.-09424260460, 09993251066 (b) NAME AND FULL ADDRESS OF :- M/s Star Industries, MANUFACTURER Jainulabddin, Prop.,

Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.)

Mob.-09424260460, 09993251066 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 03-05-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.

Note :- Technical particulars as per Annexure B enclosed


Sl. No.

Item Code Item Description Rate ( ) FOR Dest. ED & VAT




1 CSIDC_RC.37.80.211 100 128.00 2 CSIDC_RC.37.80.213 200 259.00 3 CSIDC_RC.37.80.214 225 270.00 4 CSIDC_RC.37.80.215 250 303.00 5 CSIDC_RC.37.80.216 300 303.00 6 CSIDC_RC.37.80.219 450 1029.00 7 CSIDC_RC.37.80.220 500 1132.00 8 CSIDC_RC.37.80.221 600 1451.00 9 CSIDC_RC.37.80.222 700 1646.00 10 CSIDC_RC.37.80.223 800 2205.00 11 CSIDC_RC.37.80.224 900 2878.00 12 CSIDC_RC.37.80.225 1000 2991.00 13 CSIDC_RC.37.80.226 1100 3396.00 14 CSIDC_RC.37.80.227 1200 4291.00 15 CSIDC_RC.37.80.228 1400 5793.00 16 CSIDC_RC.37.80.229 1600 6904.00 17 CSIDC_RC.37.80.230 1800 7638.00



227/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016 4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT : Extra, if applicable

TIN No. 22184802644 Address:- M/s Star Industries, Jainulabddin, Prop., Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.) Mob.-09424260460, 09993251066

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 5857300.00 2013-14 . 7888600.00 2014-15 . 6380640.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Korea



FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Korea DTIC-22/001/12/00143 Dated 23-02-2011 (The firm shall renew the license well in time No, supply order to be













ARE TO BE OFFERED FOR M/s Star Industries, INSPECTION Jainulabddin, Prop.,

Mukhtiyarpara, Nagpur, Manendragarh, Korea (C.G.) Mob.-09424260460, 09993251066





copy of every Purchase order to this office. 2. Purchasing Departments/end user will ensure to Pre Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel.



3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores. As per the Tech. Specification. 4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l- @2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@ 2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh. 5. Purchasing Department/end user will ensure to issue the Purchase Order in accordance with the Store Purchase Rules-2002 (As Amended) vide Clause No.-13



Annexure –B


TSC 17-12-2015








231/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

232/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







233/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

234/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/SI/7251 Dated 03-05-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



03-05-2016 To

29-04-2017



Incharge Marketing







Reasons





238/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 To,

M/s Akash Pipe Industries, Mukesh Baghel (Pro.), Dharampara, Mungeli, Bilaspur (C.G.) 495334


(XVII) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,




239/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.







240/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Akash Pipe Industries, THE FIRM Mukesh Baghel (Pro.),

Dharampara, Mungeli, Bilaspur (C.G.) 495334

(b) NAME AND FULL ADDRESS OF :- M/s Akash Pipe Industries, MANUFACTURER Mukesh Baghel (Pro.),


(c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 04-05-2016 to 19-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Sl. No.





1 CSIDC_RC.37.80.169

100 103.00

2 CSIDC_RC.37.80.170

150 205.00

3 CSIDC_RC.37.80.171

200 198.00

4 CSIDC_RC.37.80.172

225 229.00

5 CSIDC_RC.37.80.173

250 237.00

7 CSIDC_RC.37.80.177

450 440.00

8 CSIDC_RC.37.80.178

500 588.00

9 CSIDC_RC.37.80.179

600 746.00

10 CSIDC_RC.37.80.180

700 885.00

11 CSIDC_RC.37.80.181

800 1281.00

12 CSIDC_RC.37.80.182

900 1132.00

13 CSIDC_RC.37.80.183

1000 1189.00

14 CSIDC_RC.37.80.185

1200 1471.00




15 CSIDC_RC.37.80.211 100 128.00

16 CSIDC_RC.37.80.213 200 259.00 17 CSIDC_RC.37.80.214 225 270.00



24 CSIDC_RC.37.80.223 800 2205.00 25 CSIDC_RC.37.80.224 900 2878.00 26 CSIDC_RC.37.80.225 1000 2991.00 27 CSIDC_RC.37.80.226 1100 3396.00 28 CSIDC_RC.37.80.227 1200 4291.00 29 CSIDC_RC.37.80.228 1400 5793.00

30 CSIDC_RC.37.80.229 1600 6904.00

31 CSIDC_RC.37.80.230 1800 7638.00 Schedule- 5: Reinforced Concrete, Heavy duty, Non-pressure Pipes, Class: NP4, with ends of the pipes







TIN No. 22554301678 Address:-

M/s Akash Pipe Industries, Mukesh Baghel (Pro.), Dharampara, Mungeli, Bilaspur (C.G.) 495334

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . NM 2013-14 . NM 2014-15 . NM b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Mungeli



FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Mungeli DTIC-22/007/11/00292 Dated 06-09-2009 (The firm shall renew the license well in time No, supply order to be


Officers (DDOs).




243/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each









ARE TO BE OFFERED FOR M/s Akash Pipe Industries, INSPECTION Mukesh Baghel (Pro.),





244/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause






Annexure –B


TSC 17-12-2015








246/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

247/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







248/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

249/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/API/7252 Dated 04-05-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



03-05-2016 To

29-04-2017



03-05-2016 To

29-04-2017



Incharge Marketing







Reasons





253/266


No./CSIDC/MKD/PS-I/2016-17/ Raipur, Dated : Registered A/D Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 To,

M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207


(XVIII) Your Offer acceptance along with undertaking submitted on dated 18-04-2016


Yours faithfully,

(K.N.K. Mishra)



254/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.











462011.





(K.N.K. Mishra) Incharge Marketing


255/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016


For the supply of Item- RCC Hume Pipe as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF :- M/s Bhawani Cement Pipe Industries, THE FIRM Bharat Lal Agrawal (Prop),

Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001

Mob.-07714092724, 9425507207 (b) NAME AND FULL ADDRESS OF :- M/s Bhawani Cement Pipe Industries, MANUFACTURER Bharat Lal Agrawal (Prop),

Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001

Mob.-07714092724, 9425507207 (c) CATEGORY :- GENRAL 2. VALIDITY OF RATE CONTRACT :- From 20-05-2016 to 29-04-2017 3. DESCRIPTION OF ITEM- RCC Hume Pipe.


Sl. No.










TIN No. 22411504954 Address:- M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207

7. DELIVERY PERIOD : 45 Days 8. a. ANNUAL TURN OVER/ : 2012-13 . 13033516.00 2013-14 . 14223906.00 2014-15 . 14529583.00 b. MONETARY LIMIT : NM c. INSTALLED CAPACITY : (As per IEM Registration Certificate Issued By – DTIC Raipur

Description Capacity/Annum RCC Hume Pipe 3000 MM.


FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur DTIC-22/011/11/00557 Dated 22-05-2008 (The firm shall renew the license well in time No, supply order to be


Officers (DDOs).

(K.N.K. Mishra)

Incharge Marketing



257/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each









ARE TO BE OFFERED FOR M/s Bhawani Cement Pipe Industries, INSPECTION Bharat Lal Agrawal (Prop),

Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207




258/266Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form No. 1, Clause






Annexure –B


TSC 17-12-2015








260/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment. Schedule- 4: Reinforced Concrete, Medium duty, Non-pressure Pipes, Class: NP3, with ends of the pipes suitable for Socket & Spigot, roll on joints or confined gasket joints conforming to IS:458/2003 (Fourth Revision) with up-to-date amendment along with Rubber Ring conforming to Type 2 of IS: 5382/1985 with up-to-date amendment. Nominal Diameter of Pipes in mm. 80, 100, 150. 200, 225, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600 & 1800. 1. Dimensions, Design and Strength requirements of Reinforced Concrete Pipes of Class NP3 shall be as per the Table 3 of IS: 458/2003(Fourth Revision) with up-to-date amendment 2. Spigot & Socket dimensions of NP3 Class Pipes shall be as per Table 14 & Table 17 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. Rubber Ring chords used in the Pipe joints shall conform to Type 2 of IS: 5382/1985 with up-to-date




(S.B. Parate)

Incharge PS-I

261/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 2. Spigot & Socket dimensions of NP4 Class Pipes shall be as per Table 14 & Table 17 of IS:







262/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016 1. Visual examination, 2. Permeability Test and 3. Three Edge Bearing Test to produce 0.25 mm crack. 4. Any other Tests that are mentioned in IS: 458/2003 (Fourth Revision) with up-to-date amendment shall be carried out if desired by the Consignee. NOTE: 1. The tolerances on Pipes shall be as per clause 8.2 & tolerances on Collar shall be as per Table No.21 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 2. Workmanship & Finish of the Pipes & Collars shall be as per Clause 9 of IS: 458/2003 (Fourth Revision) with up-to-date amendment. 3. The length in which the pipes are to be supplied shall be as per the mutual agreement between the




(S.B. Parate)

Incharge PS-I

263/266 Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253 Dated 20-05-2016

SCHEDULE ‘B’





SCHEDULE “C”



Rate Contract No.


30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017





30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



30-04-2016 To

29-04-2017



03-05-2016 To

29-04-2017



03-05-2016 To

29-04-2017


17 M/s Bhawani Cement Pipe Industries, Bharat Lal Agrawal (Prop), Kh.No-521, D-1, Om Complex, Fafadih, Village-Deori, Bilaspur Road, Raipur (C.G.) 492001 Mob.-07714092724, 9425507207

20-05-2016 To

29-04-2017

Rate Contract No./CSIDC/MKD/PS-I/125/6004/16-17/RCCHP/BCPI/7253

(K.N.K. Mishra)

Incharge Marketing







Reasons





1/266 chhattisgarh state industrial development … rcc hume pipe amdt.pdf1/266 chhattisgarh state...

Documents