123c fittings & clamps - newage industries plastic … compact, easy to install and disconnect...
TRANSCRIPT
Hundreds of types of fittingsand clamps can be used withplastic and rubber tubing. Ourgoal at NewAge® Industries is tooffer a good cross-section offittings to efficiently connect our
tubing and hose products. Wesuggest you use the
Recommended Fittings &Clamps section found at
each tubing and hoseproduct to guide you inyour selection.
You’ll see on thefollowing pages thatNewAge Industriesoffers barbed fittings —Thermobarb® — invarious plastic materials
and in brass for use withsoft-walled tubing. A wide
range of standard sizes areavailable.
Heavy duty cam and groovecouplings in two materials
handle corrosive materials. Theyprovide high impact strength anda much lighter weight than theirmetal counterparts.
NewAge also offers push-to-connect and PFA compressionfittings. Contact your representa-tive about these styles or yourother fitting requirements.
Fittings & Clamps
Thermobarb® Plastic Plastic barbed fittings & hose nipples in four materials . . . . . . . . .2
Thermobarb Brass Brass barbed fittings . . . . . . . . . . . .8
Cam Operated Couplings Available in two plastic materials . . . . . . . . . . . . . . . . . . . . . .10
Oetiker® Clamps Ear type clamps . . . . . . . . . . . . . . . .12
Kwik Clamp™ Nylon double bond hose clamps .14
Worm Gear Clamps Stainless steel . . . . . . . . . . . . . . . . .15
To complete a tubing or hoseinstallation, clamps are typicallynecessary. NewAge Industriesoffers a selection of qualityproducts to securely finish yourapplication.
The unique and compact ear-type clamping system developedby Hans Oetiker is a popular item.Its simple design provides astrong clamping system thatnever needs retightening. TheOetiker name, as well as theproducts it represents, is wellknown and respected throughoutthe world.
Stainless steel worm gear clampsare offered in many styles,including lined for use with softtubing. They offer a simple screwtightening method of installation.
Many customers, however, do notwant to use metal clamps forvarious reasons (weight,corrosion, conductivity), yet theystill require a reliably strong andsecure clamp. Kwik Clamp™ givesthe advantages of an all-plasticdesign that cannot rust orcorrode, will not vibrate loose,and can be reused. Kwik Clamp isthe answer when a non-metallicinstallation is desired. ■
Sign up for our eNewsletter at www.newageindustries.com/extrusionsFluid Transfer Specialists ®
123c
2 www.newageindustries.com
123c
Made in U.S.A.
Thermobarb® PlasticP l a s t i c B a r b e d F i t t i n g s & H o s e N i p p l e s
■ Precision molded in nylon-6, high density polyethylene, PVDF,polypropylene, glass-fiber reinforced nylon, or glass-fiber reinforced
polypropylene
■ Lightweight, compact, easy to install and disconnect
■ High impact strength
■ Excellent chemical resistance
■ REACH and RoHS compliant
■ Free of phthalates
Notes
NATURAL NYLON Series 500■ Formulated to resist physical stress and abrasion■ Material: nylon 6 compound, NSF-51 and NSF-61 listed;
FDA-approved ingredients■ Free of animal derived ingredients and conflict minerals■ Maximum Operating Temperature**: 149°F ■ Excellent mechanical properties and strength■ Limited styles in 1-1/4” and 1-1/2” sizes are available;
call for details
BLACK POLYETHYLENE (PE) Series 501■ Formulated for chemical compatibility and high
impact resistance at lower temperatures■ Material: bimodal polyethylene■ Free of animal derived ingredients, conflict minerals
and BPA■ California Prop 65 compliant■ Minimum Temperature**: -103°F
NATURAL PVDF Series 507■ Formulated to resist creep and fatigue under
mechanical stress and load■ Offers excellent resistance to abrasion and UV■ Excellent chemical resistance■ Material: semi-crystalline, low molecular weight,
vinylidene fluoride polymer with FDA and USP Class VI approved ingredients
■ Free of animal derived ingredients, conflict minerals and BPA
■ California Prop 65 compliant■ Maximum Operating Temperature**: 239°F
Recommended Clamps
■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond hose clamps ■ Worm gear clamps
NATURAL POLYPROPYLENE (NATURAL PP)Series 502■ Formulated for excellent chemical and solvent resistance■ Material: high impact polypropylene copolymer,
FDA-approved ingredients ■ Free of animal derived ingredients, conflict minerals
and BPA■ California Prop 65 compliant■ Maximum Operating Temperature**: 220°F ■ A robust barb and fitting design
BLACK POLYPROPYLENE (BLACK PP) Series 508■ Formulated for excellent chemical and solvent resistance■ Material: high impact polypropylene copolymer,
FDA-approved ingredients ■ Free of animal derived ingredients, conflict minerals
and BPA■ California Prop 65 compliant■ Maximum Operating Temperature**: 220°F ■ A robust barb and fitting design
See page 6 for other POLYPROPYLENEThermobarb fittings in styles such as Y and 4-way connectors.
**Values listed are typical for the material used in manufacture, except wherenoted, and are meant only as a guide to aid in design. Field testing should beperformed to find the actual values for your application. Clamps must be usedin higher pressure applications; testing recommended.
^Available in single-barb style only — actual
product differs from illustration.
*Limited stock availability; lead times and minimums may apply — call for details.
†PVDF fittings are packaged and sold in bags of5,000 fittings per bag.
‡Nylon and PE sold in quantities of 10 pcs; othermaterials (except PVDF) sold in quantities of 100 pcs.
^^Nylon sold in quantities of 10 pcs; other materials(except PVDF) sold in quantities of 100 pcs.
††Nylon sold in quantities of 100 pcs; other materials(except PVDF) sold in quantities of 50 pcs.
3www.newageindustries.com
123c Thermobarb® PlasticP l a s t i c B a r b e d F i t t i n g s & H o s e N i p p l e s
Male Adapter
HOSE ID x NPT (IN.)
5/32 x 1/83/16 x 1/83/16 x 1/41/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/2
5/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x 3/85/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/43/4 x 11 x 1/21 x 3/41 x 1
PART NO.NATURAL
PP502 2983502 3004502 3025502 3067502 3088502 3109
502 3172502 3193502 3235502 3256502 3277502 3298502 3326502 3347502 3368502 3389502 3410
502 3480502 3501502 3522502 3543
502 3585502 3606
PART NO.BLACK
PP508 0110508 0131508 0152508 0194508 0215
508 0257*
508 0383
508 0425
508 0516508 0537508 0558*
508 0649
508 0733
PART NO.PVDF*†
507 0317
PART NO.NYLON
500 0030500 0170500 0065500 0205500 0345500 0555*
500 0240500 0135500 0275500 0415500 0590500 0800500 0310500 0450500 0625500 0835500 0485500 0660500 0870500 0695500 0905500 0975*500 0730500 0940500 1010
PART NO.PE
501 0033501 0173501 0068501 0208501 0348501 0558501 0103501 0243501 0138501 0278501 0418501 0593501 0768501 0313501 0453501 0628501 0803501 0488501 0663501 0838501 0698501 0873
Female Adapter
HOSE IDx FNPT (IN.)
3/16 x 1/83/16 x 1/41/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/25/8 x 1/23/4 x 3/4
PART NO.NYLON
500 5861^500 5868^500 5903500 5966500 5973500 5980500 5987500 6022500 6029500 6036500 6064500 6106
■ Note that sizes are listed first due to the variety of materials offered
Connector
HOSE ID (IN.)
1/83/161/4
5/163/81/25/83/41
PART NO.NATURAL
PP502 3795^502 3809502 3823502 3837502 3851502 3865502 3879502 3893502 3907
PART NO.BLACK
PP508 0922^
508 1006
PART NO.NYLON
500 1185^500 1220500 1255500 1290500 1325500 1360500 1395*500 1430500 1465*
PART NO.PE
501 1048^501 1083501 1118501 1153501 1188501 1223501 1258*501 1293
PACKAGE QUANTITY
EXCEPT PVDF†100100100100100
10 or 100‡100100100100100
100^^100100100100
100^^50 or 100††
1005050505050505050
PACKAGE QUANTITY
10010010010010010050
50 or 100††50
PACKAGE QUANTITY
1001001001001001001001001001005050
4 www.newageindustries.com
123cThermobarb® PlasticP l a s t i c B a r b e d F i t t i n g s & H o s e N i p p l e s
Female 90° Elbow
HOSE IDx FNPT (IN.)
1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/2
PART NO.NYLON
500 5567500 5574500 5637500 5644500 5651500 5686500 5693500 5700
Male 90° Elbow
HOSE ID x NPT (IN.)
3/16 x 1/83/16 x 1/41/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/21/4 x 3/4
5/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x 3/85/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/41 x 1/21 x 3/41 x 1
PART NO.NATURAL
PP502 5356502 5370502 5412502 5426502 5440
502 5517502 5566502 5580
502 5608502 5622502 5671502 5685502 5699
502 5748502 5762
502 5825502 5839
502 5916
PART NO.BLACK
PP508 2483
508 2539508 2553
508 2707508 2721
508 2798508 2812508 2826
508 2875
508 3043
PART NO.PVDF*†
507 2641
PART NO.NYLON
500 3215500 3355^500 3250500 3390500 3530500 3670*
500 3285500 3425500 3320500 3460500 3565500 3705
500 3495500 3600500 3740500 3950
500 3775500 3985500 3810500 4020500 3845500 4055500 4090
PART NO.PE
501 3008501 3148*501 3043501 3183501 3323501 3498*501 3673*501 3078501 3218501 3113501 3253501 3393501 3533
501 3288
501 3568501 3743501 3463501 3603
501 3638501 3813
Barbed 90° Elbow
HOSE ID xHOSE ID (IN.)
1/4 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/25/8 x 5/83/4 x 3/4
1 x 1
PART NO.NATURAL
PP502 5041502 5076502 5111502 5125502 5139502 5174502 5223502 5272
PART NO.BLACK
PP508 2168508 2203
508 2266508 2301
PART NO.PVDF*†
507 2235
PART NO.NYLON
500 2795500 2830500 2865500 2900500 2935500 2970500 3005500 3040
PART NO.PE
501 2623501 2658501 2693501 2728501 2763501 2798
■ Note that sizes are listed first due to the variety of materials offered
PACKAGE QUANTITY
EXCEPT PVDF†100100100
100 or 200‡‡10 or 100#
100100100100
100^^10010010010010010010050
10050505050505050
PACKAGE QUANTITY
EXCEPT PVDF†100100100100100505050
PACKAGE QUANTITY
100100100100100100100100
^Available in single-barb style only — actual
product differs from illustration.
*Limited stock availability; lead times and minimums may apply — call for details.
†PVDF fittings are packaged and sold in bags of5,000 fittings per bag.
^^Nylon sold in quantities of 10 pcs; other materials(except PVDF) sold in quantities of 100 pcs.
‡‡Nylon sold in quantities of 200 pcs; other materials(except PVDF) sold in quantities of 100 pcs.
#PE sold in quantities of 10 pcs; other materials(except PVDF) sold in quantities of 100 pcs.
^Available in single-barb style only — actual product differs from illustration.
*Limited stock availability; lead times and minimums may apply — call for details.
†PVDF fittings are packaged and sold in bags of 5,000 fittings per bag.
^^Nylon sold in quantities of 10 pcs; other materials (except PVDF) sold in quantities of 100 pcs.
‡‡Nylon sold in quantities of 200 pcs; other materials (except PVDF) sold in quantities of 100 pcs.
5www.newageindustries.com
123c Thermobarb® PlasticP l a s t i c B a r b e d F i t t i n g s & H o s e N i p p l e s
Male Tee
HOSE ID x NPT (IN.)
3/16 x 1/83/16 x 1/41/4 x 1/81/4 x 1/41/4 x 3/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2
PART NO.NATURAL
PP502 6028502 6042
502 6091
502 6154502 6168
502 6259
PART NO.BLACK
PP508 3155
508 3281
PART NO.NYLON
500 4265500 4335500 4300500 4370500 4475500 4405500 4510500 4580*500 4440500 4545500 4615
PART NO.PE
501 4023*501 4093*
501 4128*501 4233*
501 4338*
Barbed Tee
HOSE ID x HOSE ID xHOSE ID (IN.)
1/8 x 1/8 x 1/85/32 x 5/32 x 5/323/16 x 3/16 x 3/16
3/16 x 3/8 x 3/81/4 x 1/4 x 1/41/4 x 3/8 x 3/81/4 x 1/2 x 1/2
5/16 x 5/16 x 5/163/8 x 3/8 x 3/83/8 x 1/2 x 1/21/2 x 3/8 x 3/81/2 x 1/2 x 1/25/8 x 5/8 x 5/83/4 x 3/4 x 3/4
1 x 1 x 1
PART NO.NATURAL
PP502 6483^502 6546^502 6595^502 6616502 6665502 6693502 6707502 6756502 6805502 6826502 6875502 6896502 6945502 6994502 7043
PART NO.BLACK
PP
508 3722^
508 3792508 3820
508 3883
508 4023508 4072
PART NO.PVDF*†
507 3866
507 3957
507 4055
PART NO.NYLON
500 4965*500 5000^500 5035*500 5070500 5140500 5175500 5210500 5245500 5280*500 5315500 5350500 5385500 5420500 5455
PART NO.PE
501 4513^
501 4618^501 4653501 4688501 4758501 4793501 4828501 4898501 4933*501 4968501 5003501 5038501 5073
Reducer Connector
HOSE ID xHOSE ID (IN.)
1/4 x 1/81/4 x 3/163/8 x 1/41/2 x 1/41/2 x 3/85/8 x 3/85/8 x 1/2
PART NO.NATURAL
PP502 4019*502 4033502 4047502 4061502 4110502 4131502 4187
PART NO.BLACK
PP508 1146
508 1188508 1237
PART NO.PVDF*†
507 1171
PART NO.NYLON
500 1640500 1675500 1710500 1745500 1780500 1815500 1850*
PART NO.PE
501 1503501 1538501 1573501 1608501 1643
501 1713
■ Note that sizes are listed first due to the variety of materials offered
^
PACKAGE QUANTITY
EXCEPT PVDF†100
100^^100
100^^100
100^^100
PACKAGE QUANTITY
100100^^100
100^^100
100^^100^^1001001050
PACKAGE QUANTITY
EXCEPT PVDF†100100100100
100 or 200‡‡100^^10010010010010050505050
6 www.newageindustries.com
123cThermobarb® PlasticP l a s t i c B a r b e d F i t t i n g s & H o s e N i p p l e s
FDA-APPROVED POLYPROPYLENE (FDA PP) Series 509■ Excellent temperature and chemical resistance■ Material: polypropylene homopolymer, FDA approved ingredients■ Free of BPA■ California Prop 65 and EMEA 410 compliant■ Low profile ribs for easy assembly■ Lightweight■ Gamma sterilizable ■ Widely used in industry and laboratories ■ Maximum Operating Temperature**: 207°F
Reducer Connector
HOSE ID (IN.)
1/8 – 5/16and
1/4 – 7/161/8 – 5/16
and7/16 – 5/8
PART NO.
509 0421
509 0456
4-Way Connector
HOSE ID (IN.)
1/83/161/43/8
7/161/2
PART NO.
509 0946509 0981509 1016509 1051*509 1086509 1121
Connector
HOSE ID(IN.)
1/8 – 7/323/16 – 5/16
1/4 – 3/83/8 – 7/16
7/16 – 9/161/2 – 5/8
PARTNO.
509 0106509 0141509 0176509 0211509 0246509 0281
‘Y’ Connector
HOSE ID (IN.)
1/83/161/43/8
7/161/2
9/16
PART NO.
509 0596509 0631509 0666509 0701509 0736509 0771509 0806
Barbed 90° Elbow
HOSE ID(IN.)
1/83/161/43/8
9/16
PARTNO.
509 1681509 1716509 1751509 1786509 1891
**Values listed at left are typical for the material used in manufacture, exceptwhere noted, and are meant only as a guide to aid in design. Field testingshould be performed to find the actual values for your application. Clampsmust be used in higher pressure applications; testing recommended.
Note: Older style barbs, which differ from ribs, still exist insome inventory, depending on size.
Other FDA-APPROVED POLYPROPYLENE Y FITTINGS■ Precision molded of FDA-approved polypropylene
random copolymer■ Meets USP Class VI standards; compliant with
FDA 21 CFR 177.1520■ Smooth interior for unrestricted, uniform flow ■ No mold parting lines or flashing■ Longer, more tapered lead barb slides
easily into tubing and provides a secureattachment and reduced leakage
■ Sterilizable by gamma radiation ■ Three popular sizes stocked ■ REACH, RoHS and California Prop 65
compliant■ Free of phthalates, BPA, animal derived
ingredients and conflict minerals■ Max. Operating Temp.**: 178°F■ Ideal for single-use/disposable tubing
assemblies
SIZE(IN.)
1/43/81/2
PARTNO.
502 7106502 7120502 7148
PCS PER PACKAGE
1005050
Barbed Tee
HOSE ID (IN.)
1/81/4
7/16
PART NO.
509 2031509 2101509 2171
Part numbers on this page beginning with
509 are sold in increments of 10 pieces.
*Limited stock availability; lead times andminimums may apply — call for details.
7www.newageindustries.com
123c Thermobarb® Plastic P l a s t i c B a r b e d F i t t i n g s & H o s e N i p p l e s
TUBING ID(IN.)
1/4 – 3/87/16 – 5/8
PART NO.
509 2451509 2465
TUBING OD(IN.)
Fits up to 1/4Fits up to 1/2Fits up to 3/4
PART NO.POLYPROPYLENE
502 2521502 2556
Pinch Clamp■ Chemical resistant■ Autoclavable■ One piece construction for easy operation;
no sharp edges to damage tubing■ Free of animal derived ingredients and
conflict minerals■ Accurate flow rate*■ Gamma stable†■ Free of BPA; California Prop 65 compliant††
Check Valve■ Prevents back flow of liquid
when pressure is stopped■ Body made of polypropylene■ Internal gasket made of Dutral
synthetic rubber■ Made from FDA approved
ingredients■ Free of BPA and latex■ EMEA 410 compliant
Glass Fiber Reinforced NylonTemperature Range**: -30°F to 200°FWorking Pressure**: 1/2" thru 1" 175 psi 1-1/4" thru 2" 150 psi
Glass Fiber Reinforced PolypropyleneTemperature Range**: 10°F to 180°FWorking Pressure**: 1/2" thru 1" 125 psi 1-1/4" thru 2" 100 psi
Hose Nipples – Hose x MNPTSIZE(IN.)
1/23/41
1-1/41-1/2
2
PART NO.NYLON
560 3297560 3325560 3353560 3381560 3409560 3437
PART NO.POLYPROPYLENE
561 3832561 3860561 3888561 3916561 3944561 3972
Reinforced Nipples■ Made from glass fiber-reinforced nylon (yellow in color) or glass fiber-reinforced polypropylene (black in color)■ High impact strength yet much lighter in weight than metal ■ Resistant to most hydrocarbons, solvents, mild acids, and agricultural chemicals ■ Made to MIL-C-27487 dimensions; fully interchanged with other materials made to the same standard ■ Electrically non-conductive
**Values listed are typical for the materialused in manufacture, except where noted,and are meant only as a guide to aid indesign. Field testing should be performed tofind the actual values for your application.Clamps must be used in higher pressureapplications; testing recommended.
All items on this page sold in increments of 10 pieces.
PART NO.POLYESTER
502 2591
502 2521
502 2556 & 502 2591
*Applies to 502 2556 and 502 2591 only. 502 2521 doesnot offer an adjustable flow rate; open or closed only.†Applies to 502 2521 and 502 2591 only. Discolorationmay occur from exposure.††Applies to 502 2521 and 502 2556 only.
ACCESSORIES
8 www.newageindustries.com
Thermobarb® BrassB r a s s B a r b e d F i t t i n g s
123c
■ Formed of forged and/or machined brass
■ Tapered pipe threads are made to Dryseal USA specifications
■ An industrial standard — use in all general purpose applications
Notes
■ General purpose brass barbed fittings designed for maximum durability
■ Working temperature**: -40°F to 180°F■ Working pressure**: 150 psi at 160°F
with appropriate clamps
**Values listed are typical for the material used in manufacture, except where noted, and are meant onlyas a guide to aid in design. Field testing should be performed to find the actual values for yourapplication. Clamps must be used in higher pressureapplications; testing recommended.
Male Adapter
HOSE ID (IN.)x NPTF
1/8 x 1/81/8 x 1/4
3/16 x 1/83/16 x 1/41/4 x 1/81/4 x 1/41/4 x 3/8
5/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x 3/85/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/41 x 3/41 x 1
PART NO.
600 0491600 0505600 0603600 0617600 0659600 0673600 0687600 0757600 0813600 0827600 0841600 0855600 0932600 0939600 0946600 0960600 1023600 1030600 1044600 1079600 1093600 1163600 1177
Recommended Clamps
■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond
hose clamps ■ Worm gear clamps
All items sold in increments of 10 pieces.
Philip AraujoWarehouse/Owner1 year
Cinthya QuispeManufacturingEngineer/Owner3 years
Dillon SomaineWarehouse/Owner1 year
Meet Some of NewAge Industries’ OwnersThrough an EmployeeStock Ownership Plan(ESOP), we’re partowners in the company,and that makes yoursatisfaction an invest-ment in our future.
Samang HoutSilicone Molding/Owner13 years
Bob GalloTerritory SalesRep./Owner1 year
Kathi LohrBuyer/Planner/Owner2 years
9
123c Thermobarb® BrassB r a s s B a r b e d F i t t i n g s
Female Adapter
HOSE ID (IN.)x NPTF
1/8 x 1/81/4 x 1/81/4 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 1/2
PART NO.
600 2381600 2416600 2423600 2507600 2514600 2528600 2542
Swivel Female Flare Adapter
HOSE ID (IN.)x FEMFL
1/4 x 1/41/4 x 3/8
PART NO.
600 3123600 3137
Connector
HOSE ID (IN.)
1/43/81/2
PART NO.
600 1394600 1408600 1422
Male 45° Elbow
HOSE ID (IN.)x NPTF
3/8 x 1/81/2 x 3/8
PART NO.
600 4761600 4880
Male 90° Elbow
HOSE ID (IN.)x NPTF
1/4 x 1/81/4 x 1/4
5/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/85/8 x 1/2
PART NO.
600 3977600 3991600 4075600 4124600 4138600 4152600 4243600 4250600 4341
Male Tee
HOSE ID xNPTF (IN.)
3/8 x 1/4
PART NO.
600 6014
Barbed Tee
HOSE ID x HOSEID x HOSE ID (IN.)
3/8 x 3/8 x 3/8
PART NO.
600 6483
All items sold in increments of 10 pieces. *Limited stock availability; lead times and minimums may apply — call for details.
*
Swivel Female Adapter Ball End
HOSE ID (IN.)x NPSM
1/4 x 1/43/4 x 3/4
PART NO.
600 2773600 2955
John FoxPlant Engineer/Owner16 years
Nicole MoserEnviron. Monitoring& Sterility Assur./Owner/1 year
Corey FratarcangeliWarehouse/Owner1 year
Bounnarith TourPlastic Mfg./Owner1 year
Nick CarsonQuality Inspector/Owner1 year
Daniel HouserWarehouse/Owner1 year
www.newageindustries.comMore NewAge Industries’ Owners
Did you know . . . ?100% of our extrudedtubing is continuouslyinline laser monitored
for size.
10 www.newageindustries.com
123cCam Operated CouplingsP l a s t i c C a m O p e r a t e d C o u p l i n g s
NYLON (Glass Fiber Reinforced)
■ High impact strength at much lighter weight than metal counterparts■ Corrosion resistant
■ Will not easily cross thread or seize on mating threads■ Electrically non-conductive■ Resistant to most hydrocarbons, solvents, mild acids, and agricultural
chemicals■ Made to MIL-C-27487 dimensions — fully interchangeable with
other materials made to the same standards
POLYPROPYLENE (Glass Fiber Reinforced)
■ Similar properties to nylon (above) yet more resistant to most acidsthan nylon couplings
■ Made to MIL-C-27487 dimensions
Notes
NYLONMaterial: Glass-fiber reinforced nylon — yellow in colorStandard Gasket: EPDMHandle: 304L Stainless SteelPin: 302 Stainless SteelTemperature Range: -30°F to 200°F**Working Pressure**: 1/2" thru 1" 175 psi 1-1/4" thru 2" 150 psi 3" 100 psi 4" 50 psi
POLYPROPYLENE (PP)Material: Glass-fiber reinforced polypropylene — black in colorStandard Gasket: EPDMHandle: 304L Stainless SteelPin: 302 Stainless SteelTemperature Range: 10°F to 180°F**Working Pressure**: 1/2" thru 1" 125 psi 1-1/4" thru 2" 100 psi 3" 75 psi
CAM OPERATED COUPLINGS are available withBSPT (metric) threads through minimum order.
**Values listed are typical for the material used inmanufacture, except where noted, and are meant onlyas a guide to aid in design. Field testing should beperformed to find the actual values for your application.Clamps must be used in higher pressure applications;testing recommended.
Made in U.S.A.
Parul MalaniQuality Inspector/Owner1 year
Nirav MehtaRegional SalesManager/Owner1 year
Bill HarknessWarehouse/Owner1 year
Bridget FieldsCustomer ServiceRep./Owner1 year
Hemant PatelSilicone Manu-facturing/Owner9 years
Siravuth SinnSilicone Molding/Owner2 years
Did you know . . . ?100% of calls receivedduring normal businesshours are answered by a
person, not a machine.
More NewAge Industries’ Owners
Jakeem ReamsWarehouse/Owner1 year
Lynneesha SmithAccounts Payable/Owner1 year
Brian BittingerWarehouse/Owner1 year
James CarterWarehouse/Owner1 year
Bill BaerWarehouse/Owner1 year
On 1/2” and 5/8” sizes, the coupler and adapter portion is made to the 3/4” standard, therefore these sizes will mate together.On the 1-1/4” size, the coupler and adapter portion is made to the 1-1/2” standard, therefore these sizes will mate together.*Limited stock availability; lead times and minimums may apply — call for details.
11www.newageindustries.com
123c Cam Operated CouplingsP l a s t i c C a m O p e r a t e d C o u p l i n g s
Type A – Adapter x FNPT
Type B – Coupler x MNPT
SIZE(IN.)
1/23/41
1-1/41-1/2
234
PART NO.NYLON
560 0077560 0105560 0133560 0161*560 0189560 0217560 0245560 0273
PART NO.PP
561 0052561 0080*561 0108561 0136*561 0164561 0192561 0220
SIZE(IN.)
1/23/41
1-1/41-1/2
234
PART NO.NYLON
560 0385560 0413560 0441560 0469*560 0497560 0525560 0553560 0581
PART NO.PP
561 0388561 0416561 0444561 0472*561 0500561 0528561 0556
■ Note that sizes are listed first due to the two materials offered.
Type C – Coupler x Hose BarbSIZE(IN.)
1/25/83/41
1-1/41-1/2
234
PART NO.NYLON
560 0749560 0777560 0805560 0833560 0861*560 0889560 0917560 0945560 0973
PART NO.PP
561 0724
561 0752561 0780561 0808*561 0836561 0864561 0892
Type D – Coupler x FNPTSIZE(IN.)
1/23/41
1-1/41-1/2
234
PART NO.NYLON
560 1197560 1225560 1253560 1281*560 1309560 1337560 1365560 1393
PART NO.PP
561 1088561 1116561 1144561 1172*561 1200561 1228561 1256
Type E – Adapter x Hose BarbSIZE(IN.)
1/25/83/41
1-1/41-1/2
234
PART NO.NYLON
560 1561560 1589560 1617560 1645560 1673*560 1701560 1729560 1757*560 1785
PART NO.PP
561 1424
561 1452561 1480561 1508*561 1536561 1564561 1592*
Type F – Adapter x MNPTSIZE(IN.)
1/23/41
1-1/41-1/2
234
PART NO.NYLON
560 1953560 1981560 2009560 2037*560 2065560 2093560 2121560 2149
PART NO.PP
561 1760561 1788561 1816561 1844*561 1872561 1900561 1928
Type DP – PlugPART NO.
NYLON
560 2989*560 3017*560 3045*560 3073*560 3101*560 3129*
PART NO.PP
561 3160561 3188561 3216561 3244561 3272
SIZE(IN.)
3/41
1-1/2234
Type DC – CapSIZE(IN.)
3/41
1-1/2234
PART NO.NYLON
560 2681*560 2709*560 2737*560 2765*560 2793*560 2821*
PART NO.PP
561 2488561 2516561 2544561 2572561 2600
12 www.newageindustries.com
Oetiker ® ClampsE a r T y p e C l a m p s
■ Oetiker ear type clamps “breathe” and adapt to the expansion and contractionof hose affected by thermodynamics or aging — no need to retighten
■ Clamps are lightweight and compact — important when bulky screw-typeclamps interfere with limited-space applications
■ Provides a tamper-proof seal without damage to the hose
Notes
One Ear Special clamps are available through special order. Theseclamps feature a one-piece design made from spirally welded tubing toprovide a strong grip with a smooth inner and outer band surfaces. Theone-ear design allows for easy access. Call for details.
Because each application has its own set of variables, applicationpressures vary. Field testing should be performed to determine the actual maximum pressure for the application.
INCHESOPEN-CLOSED
.414 - .350 .444 - .381 .484 - .409 .524 - .449 .551 - .469 .571 - .496 .618 - .532 .669 - .594 .728 - .618 .779 - .669 .827 - .717 .890 - .780 .949 - .839 1.008 - .898 1.067 - .945 1.126 - 1.004 1.185 - 1.063 1.244 - 1.122 1.303 - 1.181 1.362 - 1.240 1.421 - 1.299 1.480 - 1.358 1.500 - 1.378 1.559 - 1.437
NOM.OD (IN.)
3/87/16
15/321/2
35/649/165/8
11/1623/32
3/413/16
7/815/16
11-1/161-1/8
1-3/161-1/4
1-5/161-3/8
1-7/161-15/32
1-1/21-9/16
Larger sizes are available — call for details.
PART NO.STAINLESS
STEEL
582 0073
582 0094582 0101582 0115582 0122582 0136582 0150582 0157582 0164582 0178582 0192582 0206582 0220582 0234*582 0248*582 0262*582 0276*582 0290*582 0304*582 0318*582 0325*582 0332*582 0346*
PART NO. ZINC
PLATED
584 0072584 0086584 0093584 0100584 0114584 0121584 0135584 0149584 0156584 0163584 0177584 0191584 0205584 0219584 0233*584 0247*584 0261*584 0275*584 0289*584 0303*584 0317*
584 0331*584 0345*
One Ear
■ Made of UNS S30400 (DIN 1.4301) stainless steel or SAE1008/1010 (DIN 1.0338) zinc plated carbon steel
■ Features a mechanical lock at the joint instead of a spot weld — prevents failure due to corrosion
1/16"
Position clamp on hose asshown.
Give each ear a firmsqueeze with your OetikerStandard Jaw Pincers.
Where access to ear is difficult, use Oetiker SideJaw or Narrow Jaw Pincers.
Grip outer edge of ear firmly and cut through witheither pincers.
Stepless clamps may beeasily removed by pryingend up with a commonscrewdriver.
to Apply: to Remove:
Cut ear by taking severalsmall bites at its base witheither pincers. Then grip earfirmly and twist off.
➞
*Limited stock availability; lead times and minimums may apply— call for details.All Oetiker clamps sold in increments of 100 pieces.
Installation Notes
When installing OETIKER EAR TYPE CLAMPS,each ear must be crimped as recommended toobtain a proper seal. An incorrect installationmay impair the connection. If a clamp ear canbe closed all the way, the clamp size selected isprobably too big, and the next smaller clampshould be used.
123c
13www.newageindustries.com
123c Oetiker ® ClampsE a r T y p e C l a m p s
One Ear Stepless
■ UNS S30400 (DIN 1.4301) stainless steel
■ Patented design guarantees360° seal preventing leaks onsoft or thin walled hose ortubing
■ One-ear design allows easyaccessibility
Two Ear
■ UNS S30400 (DIN 1.4301) stainless steel or SAE1008/1010 (DIN 1.0338) zinc plated carbon steel
■ One-piece design made from spirally welded tubing
NOM.OD (IN.)
9/325/1611/323/8
25/6413/3215/32
1/217/3235/649/165/8
11/1623/32
3/47/8
15/161
1-1/161-1/8
1-5/161-7/16
INCHES OPEN-CLOSED
.275 - .228 .315 - .268 .343 - .275 .374 - .307 .394 - .327 .413 - .346 .484 - .385 .524 - .425 .543 - .445 .551 - .453 .571 - .472 .618 - .520 .669 - .571 .728 - .602 .779 - .654 .890 - .764 .949 - .8231.008 - .8821.067 - .9411.126 -1.0001.303 -1.1771.421 -1.295
PART NO.
582 5351582 5365582 5379582 5393582 5400582 5407582 5435582 5449582 5463582 5470582 5477582 5505582 5533582 5547582 5561582 5617582 5645582 5673582 5687582 5701582 5743*582 5771*
NOM.OD (IN.)
5/3211/643/161/4
5/163/81/2
9/1619/32
5/83/4
13/167/8
15/161
1-1/161-1/8
1-5/161-7/161-1/2
INCHESOPEN-CLOSED
.161 - .122 .177 - .138 .197 - .118 .276 - .197 .354 - .276 .433 - .319 .512 - .433 .591 - .492 .669 - .551 .708 - .591 .787 - .638 .866 - .713 .906 - .752 .984 - .8311.063 - .8861.102 - .9451.220 -1.0351.339 -1.1541.457 -1.2601.575 -1.378
PART NO.STAINLESS
STEEL
582 2670*
582 2684582 2712582 2740582 2768582 2824582 2852582 2866582 2880582 2936582 2964582 2992582 3020582 3048582 3062582 3076582 3118582 3146582 3160
PART NO.ZINC
PLATED
584 2669*584 2676*584 2683584 2711584 2739584 2767584 2823584 2851584 2865584 2879584 2935584 2963584 2991584 3019584 3047584 3061584 3075584 3117584 3145584 3159
*Limited stock availability; lead times and minimums may apply— call for details.All Oetiker clamps sold in increments of 100 pieces.
PART NO.
980 0182
PART NO.
980 10003/8” jaw width for tightareas
PART NO.
980 0203Dual-purpose design allowsclamps to be applied orremoved in confined areas withpincers held parallel to thehose. May also be used likeStandard Jaw Pincers; 3/4” jawwidth.
Narrow Jaw PincerStandard Jaw Pincer Side Jaw Pincer
PINCERS
■ Use for proper crimping of clamps■ Durable steel construction
■ Three styles to select from
3/4” jaw width
N y l o n D o u b l e B o n d H o s e C l a m p s
123cKwik Clamp™
■ Made of durable, black nylon 6-6, a U.L. Recognized Component
■ Will not rust or corrode
■ Easy to install and remove with hose in place; reusable
■ Handles temperatures from -40°F to 340°F**
■ Handles most moderate non-hydraulic pressure applications
■ Patented double row of teeth ensures a strong bond that willnot vibrate loose
■ RoHS compliant
■ Heat and light stabilized
Notes
KWIK CLAMPS are typically stored andshipped with a small amount of water. Thishelps to maintain physical properties andprevents the clamps from drying and/orcracking prior to use. Water does not harmthe product.
**Values listed are typical for the material used in manufacture, except where noted, and are meant only asa guide to aid in design. Field testing should be performed to find the actual values for your application.Clamps must be used in higher pressure applications;testing recommended.
MAX.(IN.)
.256 .311 .362 .406 .465 .543 .594 .673 .752 .811 .906 .980 1.087 1.161 1.268 1.370 1.492 1.614 1.740 1.819 1.988 2.118 2.224 2.382 2.823 2.969 3.169 3.346 3.567 4.020 4.402
MIN.(IN.)
.220 .256 .311 .362 .402 .472 .516 .591 .670 .713 .799 .874 .965 1.043 1.134 1.260 1.350 1.496 1.580 1.701 1.811 1.909 2.087 2.165 2.591 2.756 2.941 3.142 3.350 3.846 4.146
BANDWIDTH
(IN.) .17 .18 .18 .18 .23 .24 .28 .28 .27 .28 .25 .28 .28 .29 .35 .36 .35 .36 .35 .35 .35 .35 .35 .37 .36 .36 .36 .35 .35 .34 .35
BAND THICKNESS
(IN.) .055 .063 .063 .067 .067 .067 .079 .079 .083 .083 .083 .079 .083 .087 .079 .087 .083 .083 .087 .087 .083 .083 .083 .091 .102 .102 .102 .114 .102 .102 .102
PART NO.
570 0072570 0149570 0226570 0303570 0380570 0457570 0534570 0611570 0688570 0765570 0842570 0919570 0996570 1073570 1150570 1227570 1304570 1381*570 1458570 1535570 1612*570 1689570 1766*570 1843*570 1997*570 2074*570 2151*570 2228*570 2305*570 2382*570 2459*
Tony SzokaTerritory SalesRep./Owner2 years
Munin HengSilicone Molding/Owner1 year
Chris WitteWarehouse/Owner1 year
Andrew TrolioTest Engineer/Owner1 year
Savit MannSilicone Molding/Owner7 years
Ferry TakiliWarehouse/Owner1 year
More NewAge Industries’ Owners
Did you know . . . ?The average length oftime a Sales TeamMember has been withNewAge is six years.
*Limited stock availability; lead times and minimums may apply — call for details.All part numbers up to and including 570 1304 sold in bags of 100 pieces.
All others sold in bags of 50 pieces.
14
www.newageindustries.com
15www.newageindustries.com
123c
■ Ideal®-Tridon® branded clamps
■ All-steel construction for durability
■ Miniature, marine grade, and lined types available
■ Simple screw tightening method
■ Wide range of uses
Worm Gear ClampsS t a i n l e s s S t e e l C l a m p s
*Limited stock availability; lead times and minimums may apply — call for details.All worm gear clamps sold in increments of 10 pieces.
NotesSERIES 52M / 300 – Miniature
Band: 5/16” wide, 301 stainless steel ■Housing: carbon steel, clear chromatedipped ■ Screw: combination 1/4” hex headslotted, 1018 carbon steel, clear chromateplated
SERIES 62M – Miniature, AutomotiveGrade
Band: 5/16" wide, 301 stainless steel ■Housing: 301 stainless steel ■ Screw: combination 1/4" hex head slotted, 410stainless steel
SERIES 611Band: 1/2" wide, 201 stainless steel to 4”
nom; 301 stainless steel 4-1/2” nom & above■ Housing: 301 stainless steel ■ Screw: combination 5/16" hex head slotted, 1018carbon steel, clear chromate plated
SERIES 620Band: 1/2" wide, 301 stainless steel ■
Housing: 301 stainless steel ■ Screw: combination 5/16" hex head slotted, 305stainless steel
SERIES 225 – Marine GradeBand: 9/16" wide, 301 stainless steel ■
Housing: 301 stainless steel ■ Screw: combination 5/16" hex head slotted, 305stainless steel
SERIES 613 – Lined Clamp for Soft TubingLining prevents soft tubing, such as
silicone, from extruding through band notches during clamp application ■ Band:1/2" wide, 201 stainless steel ■ Lining: 301stainless steel ■ Housing: 201 stainless steel ■Screw: combination 5/16" hex head slotted,1018 carbon steel, clear chromate plated
MINIATURE CLAMPS
MAX.5/87/81
1-1/161-1/41-1/21-3/4
MIN.7/325/167/161/2
9/1611/167/8
NOM.3/81/2
9/165/83/41
1-1/4
SERIES 52MPART NO.580 1257580 1292
SERIES 300PART NO.
580 1327580 1362580 1397580 1432580 1467
SERIES 62MPART NO.580 1992580 2027580 2062580 2097580 2132580 2167580 2202
DIAMETER RANGE (IN.)
*
*
STANDARD CLAMPS
MAX.1-1/161-1/41-1/21-3/4
22-1/42-1/22-3/4
33-1/43-1/23-3/4
44-1/2
55-1/2
66-1/2
7
MIN.9/169/1611/163/4
1-1/161-5/161-9/16
1-13/162-1/162-5/162-9/16
2-13/163-1/162-9/16
33-1/2
44-1/2
5
NOM.13/16
7/81-1/161-1/41-1/21-3/4
22-1/42-1/22-3/4
33-1/43-1/23-1/2
44-1/2
55-1/2
6
SERIES 611PART NO.580 2762580 2797580 2832580 2867580 2902580 2937580 2972580 3007580 3042580 3077580 3112580 3147580 3182580 3217580 3252
580 3357
SERIES 620PART NO.580 4827580 4862580 4897580 4932580 4967580 5002580 5037580 5072580 5107580 5142580 5177580 5212580 5247580 5282580 5317580 5352580 5387580 5422580 5457
DIAMETER RANGE (IN.) SERIES 225PART NO.580 0067580 0102580 0137580 0172580 0207580 0242580 0277580 0312
580 0382580 0417580 0452580 0487580 0522580 0557580 0592580 0627580 0662580 0697
*
**
*
*
*
*****
*
*
*
**
****
LINED CLAMPS
MAX.13/161-1/81-3/82-1/42-1/22-3/4
3
MIN.5/83/4
13/161-5/161-9/16
1-13/162-1/16
NOM.3/4
15/161-1/161-3/4
22-1/42-1/2
SERIES 613PART NO.580 3952580 4022580 4057580 4162580 4197580 4232580 4267
DIAMETER RANGE (IN.)
*******
■ Note that sizes are listed first due to the variety of materials offered
DISTRIBUTOR PARTNER 800-50-NEWAGE(800-506-3924)
215-526-2300Fax: 800-837-1856
145 James WaySouthampton, PA 18966www.newageindustries.com
NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 1954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age.12/7/17© NewAge Industries, Inc. 2017 Specifications are subject to change without notice.
123c
123c
WARRANTY: NewAge Industries’ products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge. This warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examinationby NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability. The data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application.
Kwik Clamp, NewAge, Thermobarb, “Fluid Transfer Specialists,” and The "N" Logo are trademarks of NewAge® Industries, Inc. • Oetiker reg. TM Oetiker, Inc. • Ideal and Tridon reg. TMs Ideal Clamp Products, Inc.
■ Select from reinforced hose or ester or ether based unreinforced tubing
■ Naturally flexible – no plasticizers to migrate out and cause flow contamination
■ Resistant to weathering, moisture, chemicals, petroleum products
■ Well-suited for applications involving repeated flexing, vibration, abrasion situations, radiation exposure, impact
Polyurethane Braid-Reinforced or Unreinforced
■ Braid-Reinforced hose or unreinforced tubing
■ Flexible, resilient, odorless
■ Ingredients meet USP Class VI, FDA, and NSF-51 requirements
■ Handles temperatures ranging from -100°F to 500°F
■ Peroxide or platinum cured
Silicone Platinum or Peroxide Cured, Medical Grades
■ Chemical and corrosion resistance with rubber-like flexibility
■ Choose from various construction options: braid reinforced, unreinforced, rigid pipe, wire reinforced, push-on style, spiral reinforced
■ NSF, antimicrobial and DEHP-free versions available
■ Applications include general industrial, food, pharmaceutical and medical, protective coverings, insulation sleeving, equipment components, many more
PVC A Wide Range of Styles
Request catalogs on these products. . . or on NewAge’s fluoropolymer, rubber and semi-rigid tubing and hose.Catalogs for push-to-connect fittings and custom products are also available.Contact your NewAge Industries’ sales representative or local distributor torequest a copy of the catalog you need, or visit www.newageindustries.com.
Tubing Options