12 volt vacuum pump installation instructions brake & suspension specialists 12 volt vacuum pump...
TRANSCRIPT
Classic Performance Products, Inc. 714.522.2000 | fax 714.522.2500 175 E. Freedom Avenue | Anaheim, CA 92801 | www.classicperform.com
Steering, Brake & Suspension Specialists
12 Volt Vacuum Pump Installation Instructions
Instructions:1. Mount the vacuum pump.2. Connect the vacuum fittings, hoses, switch, and filter as shown in the diagram.3. Connect the black wire from the vacuum pump to a ground.4. Connect the red wire from the vacuum pump to one of the terminals on the vacuum switch.5. Connect the other terminal of the vacuum switch to +12 volts when the ignition key is turned on. (Be sure that
the +12 volt circuit has a fuse).
For technical help call Classic Performance Products Monday thru Friday 8:30am to 5:00pm at (714) 522-2000.
Rev. 7/9/2008
Parts List:1 ea. Vacuum Pump1 ea. Vacuum Switch1 ea. 3/8 Barbed “T” Fitting1 ea. 1/8-NPT “T” Fitting1 ea. Exhaust Filter1 ea. 3/8” Vacuum Hose2 ea. Vacuum Check Valve3 ea. 1/8-NPT x 3/8 Barbed Fitting