1125. Equipment for the metalworkingindustry

Sale Information

Number of items : 25

Location : Gullegem (Belgium)

Start date : 23 October 2018 as from 17:00

End date : 06 November 2018 as from 18:30

Viewing day : 30 October 2018 from 10:30 to 12:00

Drieslaan, 25

8560 Gullegem (BE)

Removal day : 19 November 2018 from 10:00 to 16:00

Drieslaan, 25

8560 Gullegem (BE)

WWW.AUCTELIA.COM

The General Terms and Conditions and the Specific conditions of sale apply to this online Auction

SPECIFIC CONDITIONS - 1125. Equipment for the metalworking industry

START DATE 23 October 2018 as from 17:00

END DATE 06 November 2018 as from 18:30

VIEWING30 October 2018 from 10:30 to 12:00

Drieslaan, 25

8560 Gullegem (BE)

REMOVAL19 November 2018 from 10:00 to 16:00

Drieslaan, 25

8560 Gullegem (BE)

In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows

on the removal day the proforma invoice and signs the delivery note.

WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots.

WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and

transport costs will be charged.

AUCTION FEES Auction Fees (based on Final Selling Price per Piece)- Amounts less than €15,000 17% of the final selling price

- Amounts more than €15,000 12% of the final selling price

VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees

PAYMENTWithin 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the

bank account below and mention the invoice number:

Auctelia

ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB

BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB

ORGANIZERAUCTELIA

Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6

1435 Mont-Saint-Guibert (BE)

SUPERVISION This online Auction sale is held under the supervision of court Bailiff Alain BORDET, 4031 Angleur-Lige and/or court Bailiff

Marcel MIGNON, 6870 Saint-Hubert.

EXTENSION OF

ONLINE AUCTION If there is at least one Bid within the last 5 minutes of a sale, the closing time is extended by 5 minutes until there is no more

Bid.

If no Bid has been placed on a Lot, then the closing time of the sale of this Lot is extended by 20 minutes.

ATTRIBUTION OF LOTS Within 48 hours of the closing of the Auction (Saturdays, Sundays and Belgian public holidays not included), the Candidate-

Buyer receives confirmation of purchase by e-mail on behalf of the Seller that the Sales contract has been materialised. If the

Candidate-Buyer has not received an e-mail of confirmation within this delay, this means that their Bid did not result in an

Attribution.

TERMS AND

CONDITIONSThe General Terms and Conditions and the Specific conditions apply to this online Auction, as you can find on the website

www.auctelia.com.

TO THE ATTENTION OF

THE CANDIDAT-

BUYER/BUYER

Lots are sold as they are, in the state they are in on the date of Attribution or of the Sales contract, with all the benefits and

burdens attached thereto. Auctelia SA and/or the Seller provide no guarantee relating to hidden or visible defects, nor does it

provide guarantees relating to the wholeness, quantities, the working and/or the usefulness. Defects of any nature

whatsoever, the disappointed expectations of the Buyer or third party buyers do not give right to compensations, damages

and/or settlement. Given that Lots can be viewed before the Sale or the Auction and that the Terms and Conditions are

known to the Buyer, the Buyer is deemed to have carefully examined the Lots, prior to purchase. The Buyer examines the

Lots at his own risk.

TRANSLATION In the case of a discrepancy between translations of these Specific conditions and the original French version of these

Specific conditions, the French version prevails.

Photos Description Start price

ID : 1125-001 IMA multi-head drillMake : IMA

Multi-head drill

Make: IMA

Year: 1991

Number of head: 14

Number of engines: 14

Voltage: 220 V / 380 V three-phase

Power of an engine: 0,55 kW

Overall dimensions: 5 mx 3.5 mx 3 m

Remark: Electrical cabinets provided

Condition: not tested

200,00 €

ID : 1125-002 Dormac Labor E 200 Horizontal latheMake : Dormac

Model : Labor E 200

Horizontal metal lathe

Make: Dormac

Model: Labor E 200

Year: 1994

Voltage: 380 V three-phase

Power: 7 kW

Length between tip: 85 cm

Chuck diameter: 20 cm

Overall dimensions: 2.50 mx 1.20 mx 1.60 m

Condition: not tested

Remark: without tools

200,00 €

ID : 1125-003 Fanuc S 420 IF RobotMake : Fanuc

Model : S 420 I F

Robot

Make: Fanuc

Model: S 420 IF

Year: 1997

Voltage: 157 V

Power: 3.8 kW

Arm height: 4 to 6 m

Length of arm: 210 cm

Overall dimensions: 2 mx 2 mx 4 m

Weight: 1400 kg

Condition: not tested

Remark: included control board

200,00 €

Photos Description Start price

ID : 1125-004 Fanuc S 420 IF RobotMake : Fanuc

Model : S 420 I F

Robot

Make: Fanuc

Model: S 420 IF

Year: 1996

Voltage: 157 V

Power: 3.8 kW

Arm height: 4 to 6 m

Length of arm: 210 cm

Overall dimensions: 2 mx 2 mx 4 m

Weight: 1400 kg

Condition: not tested

Remark: included control board

200,00 €

ID : 1125-005 Arno milling machineMake : Arno

Milling

Make: Arno

Axes:

X: +/- 50 cm

Y: +/- 60 cm

Z: +/- 70 cm

Overall dimensions: 2.35 mx 2.60 mx 2.10 m

Condition: not tested.

200,00 €

ID : 1125-006 CompAir L 30 CompressorMake : Compair

Model : L 30

Compressor

Make: CompAir

Model: L 30

Year: 2004

Voltage: V three-phase

Power: 30 kW

Overall dimensions: 150 cm x 110 cm x 140 cm

Flow rate: 4.70 m³ / minute

Weight: 750 kg

Condition: not tested

150,00 €

Photos Description Start price

ID : 1125-007 Batclean Pima 850 ET Workshop BrushMake : Batclean

Model : Pima 850 ET

Workshop brush

Make: Batclean

Model: Pima 850 ET

Voltage: 12 V

Power: 600 W

Worktime: 17

Diameter of the brush: 40 cm

Overall dimensions: 82 cm x 115 cm x 100 cm

Condition: tested

50,00 €

ID : 1125-008 Vector S87 DT90S 6BMG2 HR Motor reducer with angle gearMake : Vector

Model : S87 DT90S 6BMG2 HR

Moto reducer with angle gear

Make: Vector

Model: S87 DT90S 6BMG2 HR

Voltage: 220 - 240 V

Power: 0.75 kW

Condition: not tested

10,00 €

ID : 1125-009 Fimap MX 65 Bt Floor WasherMake : Fimap

Model : MX 65 Bt

Floor washer

Make: Fimap

Model: MX 65 Bt

Voltage: 24 V

Power: 1260 W

Width of the squeegee: 110 cm

Overall dimensions: 110 cm x 125 cm x 100 cm

Condition: not tested

Remarks: missing battery, extra brush provided

50,00 €

Photos Description Start price

ID : 1125-010 Es & Es Amsterdam Grinding MachineMake : Es & Es Amsterdam

Grinding machine

Make: Es & Es Amsterdam

Voltage: 220 / 380V

Length between points: 85 cm

Overall dimensions: 300 cm x 170 cm x 175 cm

Condition: not tested

Remark: A setting wheel is folded

500,00 €

ID : 1125-011 Motorreducers, pneumatic cylindersMake : Selfeeder, Airtec

Model : ESBP-W P 6021, ESBP-W P 13130, 04 P 604

Moto reducers

Make: Selfeeder, Airtec

Model: ESBP-W P 6021, ESBP-W P 13130, 04 P 604

Voltage: 380 V

Power: 0.55 kW, 0.75 kW

Quantity: 3

Pneumatic cylinders

Make: Selfeeder, Krachtilinder

Model: ESB-6020, ESB-1315, Type 1, Type 10, Type 20

Quantity: 5

10,00 €

ID : 1125-016 Mobile table with accessories

Mobile table with accessories

Size of the table: 160 cm x 105 cm x 87 cm

Remark: Content included

20,00 €

ID : 1125-017 Walecan Belt sanderMake : Walecan

Belt sander

Make: Walecan

Voltage: 380 V three-phase

Power: 4.5 hp

Band length: 90 cm

Band width: 8 cm

Overall dimensions: 65 cm x 145 cm x 157 cm

Condition: not tested

Remark: 6 bands provided

50,00 €

Photos Description Start price

ID : 1125-018 Chainsaw

Chainsaw

Make: unknown

Voltage: 380 V three-phase

Power: 2,5 kW

Condition: not tested

100,00 €

ID : 1125-019 TCM FHD 15 T3 ForkliftMake : TCM

Model : FHD 15 T3

Forklift

Make: TCM

Model: FHD 15 T3

Year: 2007

Hours: 5008

Propulsion: Diesel

Lifting capacity: 2680 kg

Lifting height: 300 cm

Type of mat: Duplex

Dimensions:

Length: 335 cm

Width: 110 cm

Height: 205 cm

Fork length: 120 cm

Condition: Not tested

300,00 €

ID : 1125-020 Dubbel wall cistern

Dubbel wall cistern

Capacity: 5000 L

Dimensions: 400 cm x 100 cm x 200 cm

Content: unknown

150,00 €

Photos Description Start price

ID : 1125-021 Bison P 2004 Forklift - AP23Make : Bison

Model : P 2004 - AP23

Forklift

Make: Bison

Model: P 2004 - AP23

Year: 1998

Propulsion: electric

Lifting capacity: 2000 kg

Lifting height: 453 cm

Type of mast: simplex

Dimensions:

Length: 340 cm

Width: 200 cm

Height: 291 cm

Fork length: 120 cm

Hours: 7847 h

Charger: energic plus

Input voltage: 400 V

Output voltage: 48 V

Condition: tested

500,00 €

ID : 1125-022 Daewoo D30S ForkliftMake : Daewoo

Model : D30S

Forklift

Make: Daewoo

Model: D30S

Year: unknown

Propulsion: Diesel

Lifting capacity: 3000 kg

Lifting height: 520 cm

Type of mast: Triplex

Dimensions:

Length: 366 cm

Width: 130 cm

Height: 215 cm

Fork length: 120 cm

Hours: 2546 h

Condition: not tested, battery discharged

500,00 €

ID : 1125-023 ITW GEMA Powder and paint treatmentMake : ITW GEMA

Powder and paint treatment  

Make: ITW GEMA

Overall dimensions: 180 cm x 180 cm x 250 cm

Remark: to repair

50,00 €

Photos Description Start price

ID : 1125-024 Dibalexcoil reelMake : Dibalex

Coil reel

Make: Dibalex

Voltage: 380 V three-phase

Condition: not tested

10,00 €

ID : 1125-025 Pallet rack

Pallet racks

Dimensions: 290 cm x 950 cm x 650 cm

Quantity: 1

Remark: not dismanteld in height, removable between the elements

50,00 €

ID : 1125-026 Hydrovane 128 CompressorMake : Hydrovane

Model : 128.0

Compressor

Make: Hydrovane

Model: 128

Hours: 33641

Voltage: 380 V three-phase

Power: 18.5 kW

Overall dimensions: 175 cm x 70 cm x 90 cm

Condition: tested

100,00 €

ID : 1125-027 Hydrovane 128 CompressorMake : Hydrovane

Model : 128.0

Compressor

Make: Hydrovane

Model: 128

Hours: 52043

Voltage: 380 V three-phase

Power: 18.5 kW

Overall dimensions: 175 cm x 70 cm x 90 cm

Condition: tested

100,00 €

Photos Description Start price

ID : 1125-029 Torsit single-beam bridge crane 5000 kgMake : Torsit

Model : 24/14K4P

Single beam bridge crane

Make: Torsit

Capacity: 5000 kg

Year: 1978

Dimensions of the beam: 14,80 mx 2,60 m

Thickness of the beam: 63.5 cm x 30 cm

Electric winch

Make: Demag

Model: 24 / 14K4P

Voltage: 220/380 three phase

Condition: not tested, dismanteld

100,00 €

ID : 1125-030 Bridgeport Interact 720 milling machineMake : Bridgeport

Model : Interact 720

Milling

Make: Bridgeport

Model: Interact 720

Year: 1989

Weight: 3300 kg

Voltage: 380 V three-phase

Power: 5.5 kW

Piercing height: 11.5 cm

Dimensions: 400 cm x 200 cm x 255 cm

Dimensons of the table: 92 cm x 38 cm

Number of tool holders in the shop: 20

Number of cones: 28

X, Y, Z axes:

X: 760 mm

Y: 410 mm

Z: 450 mm

Condition: not tested

Remark: Tools included, table not included.

300,00 €

WHY SELL YOUR USED EQUIPMENT WITH AUCTELIA ?

QUALITY DEALS

Auctelia is deal-focused:95% of listed equipment have been sold. We only earn our fee if you make a sale.

BEST PRICE

Online auction is one of the best way to reach the market price.

You always win.

SHORT TIME

Online auction accelerates sales so you save time and stay focused

on your own business.

info@auctelia.com

+31-85-4002222

+32-10-620660

www.auctelia.com/sell

Contact us!

References

95%

45.000+

of listed equipmenthave been sold

buyers & sellers

40 targetedcountries

+33-9-75-18-00-09