1100-section cylinder gases - blueshield · ... for higher volume, reducing number of cylinder...

Cylinder Gases

www.airliquide.ca 1-800-817-7697

A-3

Gas supply modesC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-2

CYLIN

DE

RG

ASE

SGas supply modesCylinder Gases

www.airliquide.ca

Air Liquide, one of the world’s leading producers of industrial gases, offers its customers a full

range of gas supply modes to meet their requirements.

Cylinders

• Basic gas container, holding from 1 to 15 m3 capacity (approximately)

• Available in small portable cylinders equipped with tulip caps for portability andsafety

• Available in XPR™ (extra high pressure) cylinders – for higher volume, reducingnumber of cylinder changes

• Exclusive and unique cylinders with Altop or Minitop, integrated regulator/valve foroxygen, acetylene, argon and argon mixtures cylinders

• New standard valve Smartop, residual pressure valve with ON/OFF lever for simplicity for argon, argon mixtures and helium balloon cylinders

Manifold

• Serves larger gas consumption needs

• Reduces cylinder handling

• Workstations supplied by pipeline from a manifold

• Available with either manual or automatic switch-over system

Bulk Pak

• For pure and mixed gases

• 16 cylinders framed by a steel cage

• Efficient for gas consumptions of 240 to 500 m3/month

• Single-valve outlet allowing connection with customer’s main pipeline

• No gas loss due to vaporization

For more information on bulk paks, contact your Air Liquide representative.

Micro Bulk

• For large volume requirements

• Suits gas consumptions of 500 to 1000 m3 / month

• Small liquid tank on-site at customer’s facility, filled from small tanker trucks

• Gas distributed to workstation sites via pipelines

• Gas flow should be steady to avoid vapor loss

Bulk Supply

• Ideal for very large gas volume requirements

• Recommended for gas consumptions greater than 1000 m3 / month

• Liquid tank on-site at customer’s facility, filled from tanker trucks

• Enables continuous supply of gas on a large industrial scale

• Gas flow must be heavy and continuous

A-5

Safely transport your cylindersC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-4

CYLIN

DE

RG

ASE

SSafely handle your cylinders

www.airliquide.ca

Take necessary precautions when handling cylinders to work

safely and avoid accidents.

Cylinder gases can be dangerous if not transported adequately.

Follow the safety guidelines to avoid accidents.

Safety glasses

Protective wear

Safety gloves

Safety footwear

Are you

familiar with

sizes 11 and 16?

They are easier

to handle.

Depending on the nature and quantityof the products, the transportationmay be subjected to the Transport of Dangerous Goods regulation in terms of:

• Display of Dangerous Goods Safety Marks (i.e. Placards)

• Shipping documentation

• Circulation on roads designated for dangerous goods

• Training on the regulation and the products transported

DANGER

Use a cart to move cylinders

• Put the cylinder onto a transportation cart and make sure it’s fixed with a chain. The use of a cart makes the transport faster, easier and safer(see section Carts page A-26)

*Magnetic cart illustrated

Large cylinders are heavy

An attached cylinder = peace of mind!

Protect yourself!

AIR LIQUIDE

recommends that you do not transport your cylinders in a

non ventilated trunk or space of

a vehicle.

• Close the cylinder valves

• Disconnect the equipment

• Ensure cylinders are tightly secured

• Keep your vehicle well ventilated

• Do not leave cylinders inside the vehicle

for prolonged periods

What you should do

• Air out the vehicle

Beware of leaks• A cylinder is never totally empty. A few

litres of acetylene can cause the trunk of a vehicle to explode

• A leak is more likely to occur from the pressure regulator, pipes or blowpipe

Beware of shocks

• Even when slanted inside a trunk, a cylinder can become a dangerous projectile in case of a frontal shock or a rollover

• Dismantle all equipment during transportation

• Close all faucets, even if the cylinder is empty

• Do not leave the cylinders inside the vehicle for a long period of time

• Secure the cylinders in an upright position

A-7

Cylinder Size Chart C

YLIN

DE

RG

ASE

S

1-800-817-7697

A-6

CYLIN

DE

RG

ASE

SCylinder Size Chart

www.airliquide.ca

You’re sure to find what you need with Air Liquide! We offer a wide range of cylinder sizes for a

complete gas offer. The following pages list our gases and the sizes in which they are available.

Did you know?

Air Liquide worldwide uses a standard way of recognizing cylinders. The size of the cylinder

represents the number of litres of water that it contains. For example, a size 16 cylinder would fit

16 litres of water, a size 50 would contain 50 litres of water, etc.

SIZE1 50 XPR 52 50 50 44 9 9SMARTOP ALTOP 44 37 22 16 16AL 14AL 11AL MINITOP TULIP 9 4

HEIGHTmm 1495 1461 1410 1410 1295 1295 1143 1066 787 835 591.6 596.9 464 469.1 464 355in 58.9 57.5 55.5 55.5 51 51 45 42 31 32.9 23.3 23.5 18.3 18.5 18.3 14

DIAMETERmm 229 238.8 235.7 235.7 235.7 235.7 235.7 178 178 184.15 203.20 184.15 172 172 172 133in 9 9.4 9.28 9.28 9.28 9.28 9.28 7 7 7.25 8 7.25 6.73 6.73 6.73 5.23

TARE WEIGHTkg 67 65.3 60.8 60.8 52.2 52.2 47.2 29 22.2 13.9 11.4 10.2 10 10 10 4.3lb 147.7 144 134 134 115 115 104 64 49 30.7 25.1 22.6 22 22 22 9.5

WATER CAPACITYL 50 52.1 49.1 49.1 43.3 43.3 37.2 21.7 15.4 15.7 13.4 10.7 7.87 7.87 7.87 3.6

In3 3051.2 3181 2995 2995 2640 2640 2270 1320 942 960 816 650 480 480 480 220

High Pressure

5’10” Man shown for cylinder proportion1 Cylinder size number refers to water capacity in litres.

NOTE: For the volumes and pressures in the following pages, please note that metric values (kPa and m3) are calculated at 15°C (59°F), while imperial values (psig and scf) are calculated at 21°C (70°F).All given pressure values are typical values.

152.4 cm60 inch

91.4 cm36 inch

30.5 cm12 inch

SIZE1 69 23 8 8ALTOP 69 ALTOP 23 14 MINITOP TULIP 8 2 450 108 65 28 13 100 33

HEIGHTmm 1041.4 1041.4 870 870 647.7 502.9 508 502.9 340.4 1445.3 1150.9 1095.4 766.7 462 1196.9 718.8in 41 41 34.3 34.3 25.5 19.8 20 19.8 13.4 56.9 45.3 43.1 30.2 18.2 47.12 28.3

DIAMETERmm 304.8 304.8 203.2 203.2 177.8 152.4 152.4 152.4 97.3 762 368.3 304.8 228.6 226.1 377.8 312.4in 12 12 8 8 7 6 6 6 3.8 30 14.5 12 9 8.9 14.87 12.3

TARE WEIGHTkg 98.9 98.9 41.2 41.2 23.4 12.9 14.3 12.9 4 157 32.7 26.3 12.24 6.35 31.75 10.9lb 218 218 90.9 90.9 51.6 28.5 31.6 28.5 8.8 346.1 72 58 27 14 70 24

WATER CAPACITYL 68.4 68.4 25.1 25.1 14 7.9 7.9 7.9 2.1 454 108.1 64.95 27.6 11.9 108.1 36.3

In3 4171 4171 1530 1530 855 480 480 480 128 27704.8 6596.6 3963.5 1682.4 726.2 6596.6 2217.35

Acetylene Flamal 29 Propane



152.4 cm60 inch

91.4 cm36 inch

30.5 cm12 inch

www.minitop.ca

Altop - Safety, Simplicity, Savings• Non-removable, rugged composite top protecting the fully-integrated valve

and regulating device

• Check-valve on the outlet prevents backflow of gas when connecting cylinders

• Gas supply at your fingertips; fast shut-off with ON/OFF lever

• Regulator valve operation checked with each refill

• Handle and round knob for safe and easy handling

• Pressure gauge shows cylinder pressure at all times

• Hot and cold pressure scale on the acetylene gauge

• Easy-to-set operating pressures

• These cylinders meet Department of Transport requirements.

Altop is the unique, fully-integrated valve and regulator with an ON/OFF lever that revolutionizes the use of compressed gas. It was created to provide superior safety,ease-of-use and cost efficiency in the most innovative way.

• Gas cylinders ready-to-use any time, any place- all you need are your torch and hoses

• The right regulator for the job on each cylinder- always operational and ready to supply

• Simple ON/OFF lever

Smartop Air Liquide new standard valve - Safety, Simplicity, Savings• Easy ON/OFF lever

• Shock-absorbing cap (stays in place at all time)

• Built-in flow moderator

• Easy to handle

• Check the content at a glance• SMARTOP also includes a RPV-NRV: residual

pressure valve / non-return valve

• Gas savings

• Time savings

• These cylinders meet Department of Transport requirements.

A regulator must be connected to the SMARTOPTM valve (standard CGA connection) before lifting the lever on.

Since 1995 in Europe / 1998 in Canada, Altop has been helping increase safety in industrial working environment…

Easy connection

Comes with a standardB-size connection.

Pressure gauge

Whether the lever is positioned at ON or OFF,you can see the level ofgas in the cylinder withthe glimpse of an eye.

A-9

ALTOP, SMARTOP and MINITOP - Safety reinventedC

YLIN

DE

RG

ASE

S

ALTOP, SMARTOP and MINITOP - Safety reinvented

1-800-817-7697

A-8

CYLIN

DE

RG

ASE

SCylinder Size Chart

www.airliquide.ca

SIZE1 16 X 44 16 X 50 16 X 50 XPR 160 L 180 L 240 L 450 L

HEIGHTmm 1879.6 1879.6 1879.6 1513.8 1612.9 1343.7 1574.8in 74 74 74 59.6 63.5 52.9 62

DIAMETERmm 508 508 660.4 762in 41.5x40 41.5x40 41.5x40 20 20 26 30

TARE WEIGHTkg 1125.5 1263.1 1362.3 113.4 117.9 136.1lb 2480 2784 3003.2 250 260 300

WATER CAPACITYL 692.8 785.6 800 165 185 230 428

In3 42240 47920 48819.2 10068.9 11289.4 14035.5 26118.2

Bulkpaks Liquid Cylinder (MVE)



152.4 cm60 inch

91.4 cm36 inch

30.5 cm12 inch

Easy to set

With the graduated knob,you can set and read theoperating pressure veryeasily.

Ergonomic handle

Easier to handle.

ON/OFF lever

You can always seeif it’s ON. Very easy to open and close.

Integrated regulator fullyprotected at all times

Greater safety for the user.Tested and inspected by

Air Liquide at each fill.

Available on

Oxygen size 9 (1.39 m3)

Acetylene size 8 (1.10 m3)

This smaller version of the proven Altop, will give the same benefits as the Altop but in a smaller portable package.

Minitop - The ready-to-use portable cylinder

1054.1 (Wide) x 1016 (Deep)

1054.1 (Wide) x 1016 (Deep)

1054.1 (Wide) x 1016 (Deep)

Approximate weight cylinder + frame

5681250

Come visit us at

Available on

Oxygen size 44 (6.9 m3) Acetylene size 23 (3.6 m3) Acetylene size 69 (10.3 m3)

Blueshield 8 size 50 (10.28 m3) Blueshield Argon size 50 (9.32 m3)

Flamal 29

A-10

CYLIN

DE

RG

ASE

SThe FLAMAL Advantage

www.airliquide.ca

A-11

The FLAMAL AdvantageC

YLIN

DE

RG

ASE

S

1-800-817-7697

There is no single solution to every challenge faced in today’s industrial business world. To get an

edge on your competitors you need to optimize your processes. Flamal gases can give you that

edge, no matter what flame process you use.

CGA TYPICAL CYLINDERITEM NUMBER SIZE VOLUME1

CONNECTION PRESSURESm3 scf @ 15°C / 70°F

GAS-ACE2COP 2 0.28 10.10 200 1530 kPa (250 psig)

GAS-ACE8TCOP2 8 1.10 39.67 520 1530 kPa (250 psig)

GAS-ACE8COP 8 1.10 39.67 520 1530 kPa (250 psig)

GAS-ACE8MINITOP 8 1.10 39.67 023 1530 kPa (250 psig)

GAS-ACE14 14 2.08 75.01 410 1530 kPa (250 psig)

GAS-ACE23 23 3.60 129.83 410 1530 kPa (250 psig)

GAS-ACE23ALTOP 23 3.60 129.83 023 1530 kPa (250 psig)

GAS-ACE69 69 10.30 371.46 410 1530 kPa (250 psig)

GAS-ACE69ALTOP 69 10.30 371.46 023 1530 kPa (250 psig)1 m3 @ 15ºC; scf @ 70ºF2 Size 8 equipped with tulip cap.3 Typical volume; actual volume may vary.

UN Number: UN1001 Hazard Class: 2.1

Acetylene C2H2Cylinder color: Black or blue

Acetylene is a standard fuel gas used in conjunction with oxygen for welding metals and cutting steel, and for allied oxy-acetyleneprocesses for the heating, forming and treating of metals.

Air-acetylene flames also are, in general, used for brass and aluminum soldering and other plumbing applications where the veryhigh temperature of the oxy-acetylene flame is not required.

Oxygen O2Cylinder color: Red or blue

Oxygen is commonly used in industrial applications in conjunction with acetylene and other fuel gases in processes such as metalcutting, welding, flame hardening, scarfing, cleaning, hard-facing, etc.



GAS-OXY4COP 4 0.57 20.64 540 14 960 kpa (2217 psig)

GAS-OXY9TCOP2 9 1.39 50.00 540 14 960 kPa (2217 psig)

GAS-OXY9COP 9 1.39 50.00 540 14 960 kPa (2217 psig)

GAS-OXY9MINITOP 9 1.39 50.00 022 14 960 kPa (2217 psig)

GAS-OXY16 16 2.75 99.02 540 16 820 kPa (2492 psig)

GAS-OXY22 22 3.45 124.34 540 14 960 kPa (2217 psig)

GAS-OXY44 44 6.90 248.68 540 14 960 kPa (2217 psig)

GAS-OXY44ALTOP 44 6.90 248.68 022 14 960 kPa (2217 psig)

GAS-OXYBP50 16 x 50 150.04 5411.08 540 17 820 kpa (2640 psig)

GAS-OXY160LC 160 L 124.06 4473.96 1585 kpa (230 psig)



GAS-OXY450LC 450 L 360.36 12995.78 1585 kpa (230 psig)1 m3 @ 15ºC; scf @ 70ºF2 Size 9 equipped with tulip cap.

UN Number: Gas - UN1072 / Liquid - UN1073 Hazard Class: Gas - 2.2 (5.1) / Liquid - 2.2 (5.1)

Flamal 29 C3H6Cylinder color: Yellow

A stable, propylene-based, high energy fuel gas that combines the best performance characteristics of acetylene with the safety andconvenience features of propane. Flamal 29 has a flame temperature second only to acetylene among the common fuel gases dueto its double bond between carbon atoms. When burning, Flamal 29 produces 70% more heat in its primary flame than propanedoes, and twice the secondary flame heat of acetylene.

This unique balance of heat distribution provides fast starts for cutting and piercing as well as efficient BTU transfer in heating applications, making Flamal 29 the most versatile of fuel gases.

CGA APPROXIMATEITEM NUMBER SIZE VOLUME CONNECTION CYLINDER PRESSURES

kg lb @ 15°C / 70°F

GAS-FLA2913 13 5 11 510 800 kPa (116 psig)

GAS-FLA2928 28 11.3 25 510 800 kPa (116 psig)

GAS-FLA2965 65 26.3 58 510 800 kPa (116 psig)

GAS-FLA29108 108 45.4 100 510 800 kPa (116 psig)

GAS-FLA29450 450 190.5 420 510 800 kPa (116 psig)


Propane C3H8Cylinder color: White

A liquefied petroleum gas that provides good performance in applications that require overall heat content at an economical cost.Propane does not possess the double and triple bonds found in acetylene and Flamal 29 so does not develop their high flame temperatures or concentrated heat, but its secondary flame produces a high BTU output.

Low pressure welded steel cylinders are used for propane. Most common cylinder capacity: 100 lb**.

Propane is supplied in liquid form under a vapour pressure of 827 kPa (120 psig) at 15°C. Like Flamal 29, withdrawal rate andvapour pressure vary with temperature.

** Check for availability at your local store

CGA APPROXIMATEITEM NUMBER SIZE VOLUME CONNECTION CYLINDER PRESSURES

kg lb @ 15°C / 70°F

GAS-PRO3313 33 1/3 14 30.8 - 720 kPa (120.4 psig)

GAS-PRO100 108 45.4 100 510 720 kPa (120.4 psig)


* Not used for flame applicationscommonly used for carburation(forklifts)

Gas - 540Liquid - 440Gas - 540

Liquid - 440Gas - 540


Liquid - 440

152.4 cm60 inch

91.4 cm36 inch

30.5 cm12 inch

A-13

Pure GasesC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-12

CYLIN

DE

RG

ASE

SPure Gases

www.airliquide.ca

Argon ArCylinder color: Dark green or blue

Argon is an inert gas that is often used in shielded arc processes for welding aluminum, stainless steel, bronze and copper. In these processes, argon is used as a shielded gas, either in pure form or in combination with predetermined percentages of oxygen, carbon dioxide or helium, depending on the metal being welded. (see Blueshield and Arcal section pages A16-A18).The shielding gas provides an inert atmosphere during the welding to prevent oxidation or other chemical change of the metals that would be detrimental to the weld.

Argon is also used for inerting in other industries such as wine-making & food applications. (see Aligal section page A20)



GAS-ARG9COP 9 1.38 49.81 580 14 960 kPa (2217 psig)

GAS-ARG16 16 7.75 99.26 580 16 820 kPa (2492 psig)

GAS-ARG22 22 3.43 123.77 580 14 960 kPa (2217 psig)

GAS-BLUA50SMART 50 9.32 336.28 580 17 820 kPa (2640 psig)

GAS-BLUA50ALTOP 50 9.32 336.28 032 17 820 kPa (2640 psig)

GAS-ARG50XPR 50 XPR 15.06 543.11 680 30 380 kPa (4500 psig)

GAS-ARGBP50XPR 16 X 50 XPR 240.96 8689.75 680 30 380 kpa (4500 psig)

GAS-ARG160LC 160 L 119.50 4309.61 1585 kpa (230 psig)




1 m3 @ 15ºC; scf @ 70ºF

UN Number: Gas - UN1006 / Liquid - UN1951 Hazard Class: GAS - 2.2 / Liquid - 2.2

Carbon Dioxide CO2Cylinder color: Light grey

In addition to its well-known and extensive use as the carbonating and dispensing medium in the beverage industry, (see Aligal section page A20), carbon dioxide has numerous other widely varying uses in many different industries.

For example, in metal fabricating operations, CO2 is widely used as a shielding gas in a semi-automatic welding process.

In the food industry, CO2 is employed for processing, packaging, transportation and refrigeration of meat products, frozen foods,dairy products and as an inert atmosphere over perishable packaged products.

Compressed AirCylinder color: Dark grey

Industrial compressed air is typically used to run pneumatic or air tools, inflate tires and clean parts. Breathing grade compressed airis used in applications requiring a portable source of air to breathe.



Industrial Grade:

GAS-AIR44 44 6.53 325.48 346 14 960 kPa / 2217 psig

Breathing Grade:

GAS-AIRBRE9COP 9 1.31 47.1 346 14 960 kPa / 2217 psig

GAS-AIRBRE44 44 6.53 325.48 346 14 960 kPa / 2217 psig

1 m3 @ 15ºC; scf @ 70ºF

UN Number: Gas UN1002 Hazard Class: Gas - 2.2

Helium (Industrial) HeCylinder color: Brown

Helium is used considerably in the welding industry as an inert shielding gas for arc welding. It is used both as a pure gas and inmixtures with argon for TIG or MIG welding.

On some applications, helium has the advantage over argon in gas-shielded arc welding because it provides greater arc heat for thesame welding currents and arc length. This results in deeper penetration, which is preferable for welding heavier materials, whengreater welding speed is required, or when metals of high thermal conductivity are to be welded.


CONNECTION PRESSUREm3 scf @ 15°C / 70°F

GAS-HEL50 50 8.10 292.07 580 17 820 kPa / 2640 psig

GAS-HELBP50 16 x 50 129.58 4673.04 580 17 820 kPa / 2640 psig

1 m3 @ 15ºC; scf @ 70ºF

UN Number: Gas - UN1046 Hazard Class: Gas - 2.2




Liquid - 295



Liquid - 320

CGA TYPICAL CYLINDERITEM NUMBER SIZE VOLUME CONNECTION PRESSURES [vapour pressure]

kg lb @ 15°C / 70°F

GAS-CO29COP 9 5.90 13.00 320 1590 kPa / 830 psig

GAS-CO214 14 AL 9.07 20.00 320 1590 kPa / 830 psig

GAS-CO237 37 22.68 50.00 320 1590 kPa / 830 psig

GAS-CO244 44 29.30 64.60 320 1590 kPa / 830 psig

GAS-CO2SYP37 37 22.68 50.00 320 1590 kPa / 830 psig

GAS-CO2SYP44 44 29.30 64.60 320 1590 kPa / 830 psig

GAS-CO2160LC 160 L 168 370.38 2413 kpa / 350 psig

GAS-CO2180LC 180 L 187 412.26 2413 kPa / 350 psig

GAS-CO2240LC 240 L 240 529.11 2413 kPa / 350 psig

UN Number: Gas - UN1013 / Liquid - UN2187 Hazard Class: Gas - 2.2 / Liquid - 2.2

A-15

Pure GasesC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-14

CYLIN

DE

RG

ASE

SPure Gases

www.airliquide.ca

Hydrogen H2Cylinder color: Turquoise

As a fuel gas with oxygen, hydrogen produces a relatively low flame temperature of 5,125°F (2,830°C) and it is most useful for thebrazing of aluminum and magnesium and for lead welding. Because hydrogen can be safely compressed to overcome underwaterpressures, oxy-hydrogen cutting torches are sometimes employed by divers on salvage operations. Mixed in small quantities withargon, hydrogen brings significant improvements in weld quality for stainless steels.

Hydrogen is also increasingly used in plastic brushing applications.

Helium (Balloon Grade) HeCylinder color: Lime Green

One of the major properties of helium is that it’s much lighter than air. Consequently, the entertainment industry frequently uses helium to fill balloons.

Take note that inhaling helium can be deadly; it can cause anoxia. Oxygen is needed to maintain life. If another gas is inhaled, suchas helium, it displaces the much-needed oxygen and can cause death.

CGA TYPICAL CYLINDER # BALLOONSITEM NUMBER SIZE VOLUME1CONNECTION PRESSURES FILLED2

m3 scf @ 15°C / 70°F

GAS-HELBAL9COP 9 1.21 43.64 580 14 960 kPa (2217 psig) 155

GAS-HELBAL11 11 AL 1.49 53.63 580 14 960 kPa (2217 psig) 190

GAS-HELBAL16 16 2.42 87.16 580 16 820 kPa (2492 psig) 310

GAS-HELBAL50SMART 50 8.09 291.76 580 17 820 kPa (2640 psig) 1050

1 m3 @ 15ºC; scf @ 70ºF2 Based on 25 cm (10’) balloons.


Nitrogen N2Cylinder color: Light brown

Nitrogen is used in purging applications for the heating/ventilation/plumbing industries.

Large volumes of nitrogen are required by oil refineries and petrochemical industries for purging and blanketing operations.

Nitrogen is being used at a sharply increasing rate by the food industry. In its liquid form, nitrogen is employed to quick-freeze awide variety of perishable foods, some of which cannot be successfully frozen by conventional methods. In its gaseous form, nitrogen is used in storage facilities for fresh produce to delay normal ripening and deterioration.



GAS-NIT9COP 9 1.27 45.64 580 14 960 kPa (2217 psig)

GAS-NIT11 11 AL 1.53 55.32 580 14 960 kPa (2217 psig)

GAS-NIT16 16 2.48 89.54 580 16 820 kPa (2492 psig)

GAS-NIT16AL 16 AL 2.26 81.61 580 14 960 kpa (2217 psig)

GAS-NIT50 50 8.46 305.01 580 17 820 kPa (2640 psig)

GAS-NIT50XPR 50 XPR 13.03 469.79 680 30 380 kPa (4500 psig)

GAS-NITBP50XPR 16 x 50 XPR 208.43 7516.62 680 30 380 kPa (4500 psig)

GAS-NIT160LC 160 L 100.40 3620.87 1585 kpa (230 psig)




GAS-NIT160LCLW 160 L 100.40 3620.87 1585 kpa (230 psig)

GAS-NIT240LCLW 240 L 136.68 4929.26 1585 kpa (230 psig)

1 m3 @ 15ºC; scf @ 70ºF

UN Number: Gas - UN1066 / Liquid - UN1977 Hazard Class: Gas - 2.2 / Liquid - 2.2


CONNECTION PRESSUREm3 scf @ 15°C / 70°F

GAS-HYD44 44 5.41 195.08 350 13 610 kPa (2015 psig)

1 m3 @ 15ºC; scf @ 70ºF







Liquid - 295

Cylinder color: Dark blue

Air Liquide offers the complete line of Blueshield welding shielding gas mixtures. These blends became industry standards because of their performance and consistency.

The Blueshield shielding gas family covers most of your needs for quality and consistency in the GMAW, FCAW, MCAW and GTAW processes.

A-17

BLUESHIELD Shielding GasesC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-16

CYLIN

DE

RG

ASE

SBLUESHIELD & ARCAL - Optimized Shielding Gases for Welding Application

www.airliquide.ca

Regardless of the type of steel your are welding, whether

thick or thin, Air Liquide has the optimal shielding gas for

your applications.

GMAW (MIG) GTAW (TIG) FCAW (FLUX CORED) MCAWNAME COMPOSITION CARBON STEEL STAINLESS STEEL ALUMINUM CARBON STEEL STAINLESS STEEL ALUMINUM CARBON STAINLESS STEEL STAINLESS

thin thick thin thick thin thick thin thick thin thick thin thick STEEL STEEL

BLUESHIELD Argon Ar X X X X X

BLUESHIELD 1 Ar He X X X X



BLUESHIELD 4 Ar O2 X X X X X X

BLUESHIELD 6 Ar CO2 X X X


BLUESHIELD 8 Ar CO2 X X X X X

BLUESHIELD 9 He Ar CO2 X

BLUESHIELD 11 Ar H2 X (1) X (1)

BLUESHIELD 12 Ar H2 X (4) X (1)

BLUESHIELD 145 Ar H2

BLUESHIELD 156 N2 H2


BLUESHIELD 23 Ar CO2 O2 X X X

ARCAL 14 Ar CO2 O2 X X X X X

ARCAL 21 Ar CO2 X X X

ARCAL 39 Ar He N2 X (2) X (2)

ARCAL 121 Ar He CO2 X (3) X X

ARCAL 129 Ar He CO2 N2 X (2) X (2)

ARCAL 211 Ar CO2 He X X X X X

ARCAL-ALMIG Ar CO2 O2 X X X

ARCALTIG Ar He X X X X X X X X

ARCALFLUX Ar CO2 X X X X X

(1) Austenitic only (300 series)(2) For use on duplex and super duplex stainless steels(3) Galvanized or coated steels(4) Automatic processes(5) Plasma cutting gas(6) Gas used for back shielding. It can be used for plasma cutting.

Application Guide - Choose the right shielding gas for your application CGA TYPICAL CYLINDERNAME COMPONENTS SIZE VOLUME1

CONNECTION MAIN APPLICATIONS ITEM NUMBERS PRESSURESm3 scf @ 15°C (70°F)

50 ALTOP 9.32 336.28 032 GAS-BLUA50ALTOP 17 820 kPa (2640 psig)BLUESHIELD Ar50 9.32 336.28 580 GAS-BLUA50SMART 17 820 kPa (2640 psig)ARGON

50 8.61 310.59 580GMAW and GTAW GAS-BLU150Ar

50 XPR 15.48 558.19 680Steel, and stainless steel with GTAW only, GAS-BLU150XPR

16 820 kPa (2492 psig)BLUESHIELD 1

He16 x 50 XPR 247.36 8920.69 680

aluminum, copper, nickel, magnesium, titanium GAS-BLU1BP50XPR30 380 kPa (4500 psig)

Short circuit, spray and pulse30 350 kpa (4500 psig)

ArGMAW and GTAW

BLUESHIELD 2He

50 8.32 300.02 580 Aluminum, copper, nickel, magnesium, titanium GAS-BLU250 16 820 kPa (2492 psig)Short circuit and spray and pulse

ArGMAW and GTAW

BLUESHIELD 3He

50 8.06 290.66 580 Aluminum, copper, nickel, magnesium, titanium GAS-BLU350 16 820 kPa (2492 psig)16 x 50 128.96 4650.64 580 Short circuit and spray GAS-BLU350BP 16 820 kpa (2492 psig)

GMAW and MCAWBLUESHIELD 4 Ar 50 8.84 318.98 580 Carbon, low alloy GAS-BLU450 16 820 kpa (2492 psig)

O2 and stainless steels

Ar50 9.35 337.02 580 GMAW, MCAW GAS-BLU650 16 820 kPa (2492 psig)

BLUESHIELD 6CO2

50 XPR 15.93 574.59 680 Steel GAS-BLU650XPR 30 380 kPa (4500 psig)16 x 50 XPR 254.92 9193.48 680 Short circuit, spray and pulse GAS-BLU6BP50XPR 30 350 kpa (4500 psig)

ArGMAW, MCAW, FCAW

BLUESHIELD 7CO2

50 9.48 341.72 580 Steel GAS-BLU750 16 820 kPa (2492 psig)Short circuit and spray

9 COP 1.50 54.07 580GMAW, MCAW, FCAW

GAS-BLU89COP 14 175 kPa (2100 psig)

BLUESHIELD 8Argon 22 3.74 134.94 580

Steel, and stainless steel with FCAWGAS-BLU822 14 175 kPa (2100 psig)

CO2 50 10.28 370.99 580Short circuit, and globular

GAS-BLU850 16 820 kPa (2492 psig)50 ALTOP 10.28 370.99 032 GAS-BLU850ALTOP 16 820 kPa (2492 psig)16 x 50 164.59 5935.83 580 GAS-BLU8BP50 16 820 kPa (2492 psig)

He GMAWBLUESHIELD 9 Ar 50 7.53 271.59 580 Stainless steel GAS-BLU950 16 820 kPa (2492 psig)

CO2 Short circuit

BLUESHIELD 11 Ar44 6.24 224.86 350

GTAW GAS-BLU1144 13 500 kPa (2000 psig)H2 Stainless steel (300 series only)

BLUESHIELD 12 Ar44 6.22 224.39 350

GTAW (Automatic) GAS-BLU1244 13 500 kPa (2000 psig)H2 Stainless steel (300 series only), nickel

ArPlasma arc cutting (PAC)

BLUESHIELD 14H2

50 8.16 294.39 350 Stainless steel, aluminum and GAS-BLU1450 16 210 kPa (2400 psig)other non-ferrous metals

N2GMAW and GTAW, PAC

BLUESHIELD 15H2

44 5.85 211.05 350 Stainless steel (300 series only) GAS-BLU1544 13 500 kPa (2000 psig)Back purging or trailing gas

Ar 22 3.37 121.38 580GMAW welding of carbon steel. GAS-BLU2122 14 175 kPa (2100 psig)BLUESHIELD 21

CO2 50 9.14 329.63 580MCAW welding of GAS-BLU2150 16 820 kPa (2492 psig)mild and low alloy steels

Ar 50 9.11 328.57 580 GMAW and MCAW GAS-BLU2350 16 820 kPa (2492 psig)BLUESHIELD 23 CO2 50 XPR 15.56 561.14 680 Steel GAS-BLU2350XPR 30 380 kPa (4500 psig)

O2 16 x 50 XPR 248.95 8978.16 680 Short circuit, spray and pulse GAS-BLU23BP50XPR 30 380 kPa (4500 psig)

1 m3 @ 15°C; scf @ 70°FNOTE: All of the above bold applications are preferred choices. Applications other than those mentioned are possible.

Contact your Air Liquide representative to discuss your application.

GMAW and GTAWAluminum, stainless steel and carbon steel with

GTAW only, copper, bronze.

Improve your welding application with Blueshield

TYPICAL CYLINDERMIXTURE COMPOSITION APPLICATIONS REPLACES SIZE VOLUME1 ITEM NUMBER PRESSURES

m3 scf @ 15°C (70°F)

Can replace Ar

standard Ar/CO2ARCAL 14 CO2 Ar/O2 and

50 XPR 15.23 549.28 GAS-ARC1450XPR 30 380 kPa (4500 psig)O2 Ar/CO2/O2

16 x 50 XPR 243.70 8788.53 GAS-ARC14BP50XPR 30 380 kPa (4500 psig)

mixtures

50 XPR 16.08 579.83 GAS-ARC2150XPR 30 380 kPa (4500 psig)ARCAL 21 Ar16 x 50 XPR 257.25 9277.29 GAS-ACR2150BPXPR 30 380 kPa (4500 psig)CO2

“The” choice for

ARCAL 39 Ar GTAW (TIG)50 XPR 15.35 553.64 GAS-ARC3950XPR 30 380 kPa (4500 psig)

He welding of N2 duplex materials

Can replaceAr

standard Ar/O2 50 XPR 13.96 503.44 GAS-ARC12150XPR 30 380 kPa (4500 psig)ARCAL 121 He and Ar/CO2/H2 16 x 50 XPR 223.36 8055.17 GAS-ACR121BP50XPR 30 380 kPa (4500 psig)

CO2 mixtures

Ar “The” choice for

ARCAL 129 He GMAW (MIG) 50 XPR 14.82 534.50 GAS-ARC12950XPR 30 380 kPa (4500 psig)

CO2 welding of N2 duplex materials

The ideal “clean”Ar alternative to

ARCAL 211 CO2 standard CO2 50 XPR 15.36 554.04 GAS-ARC21150XPR 30 380 kPa (4500 psig)He and Ar/CO2 16 x 50 XPR 245.81 8864.64 GAS-ARC211BP50XPR 30 380 kPa (4500 psig)

mixtures

Can replace Ar standard Ar/CO2

ALMIG CO2 Ar/O2 and 16 2.81 101.42 GAS-ALMIG16 16 820 kPa (2492 psig)O2 Ar/CO2/O2

mixtures

Can replace

ALTIG Ar argon or other 16 2.61 94.24 GAS-ALTIG16 16 820 kPa (2492 psig)

He argon/heliummixtures

ALFLUX Ar 16 3.05 109.99 GAS-ALFLUX16 16 820 kpa (2492 psig)

CO2

1 m3 @ 15°C; scf @ 70°FNOTE: All 50 XPR cylinders CGA 680. All Almig and Altig cylinders CGA 580.

Cylinder color: Light blue

The quality of the final product that you fabricate results from the degree of qualityobtained at each level of the production. We offer cylinders with a superior quality as well as a wide range of high performance Lasal gases. All Lasal gas cylinders areequipped with a check-valve that maintains a positive residual pressure that eliminatesany risk of gas contamination. Moreover, the inside surface is free of dust, particlesand humidity so that the cylinder’s content can be entirely used.

We take extra care during the filling operations of your Lasal gas cylinder. Our production methods have been devised to ensure the uniformity and the stability of the mixtures. Whether you choose pure Lasal gases or mixtures, the entire Lasal range will provide you with precision in your operations with a maximum power.

TYPICAL CYLINDERMIXTURE CGA CONNECTION SIZE VOLUME1 ITEM NUMBER PRESSURES

m3 scf @ 15°C (70°F)

LASAL 1 580 52 XPR 9.87 356.1 GAS-LAS152XPR


LASAL 4 58052 XPR 9.50 345.50 GAS-LAS452XPR16 x 50 129.60 4673.85 GAS-LAS4BP50

LASAL 34 350 44 6.08 219.27 GAS-LAS3444


LASAL P51 580 52 XPR 8.21 296.13 GAS-LASP5152XPR


LASAL 61 580 52 XPR 8.94 322.26 GAS-LASP6152XPR


LASAL 105 580 50 6.98 251.72 GAS-LAS10550

LASAL 155 350 50 6.73 242.71 GAS-LAS15550

LASAL 201 350 10 1.5 54.1 GAS-LAS20110

LASAL 2001 680 16 x 50 XPR 208.43 7516.62 GAS-LAS2001BP50XPR

1 m3 @ 15°C; scf @ 70°F

Lasal Gases:High purity gases

for the laser industry

Cylinder color: Light blue

The Arcal line was created to assure optimized performance such as:

• Improved productivity and quality

• Reduced fume emissions and spatter

• Optimized packaging with more gas in every cylinder (XPR packaging)

• Increase safety with the tulip cap protecting the valve at all times

• Better manoeuverability of the cylinder with the protective cap

Optimize your welding applications with Arcal

A-19

LASAL Gases for the Laser IndustryC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-18

CYLIN

DE

RG

ASE

SARCAL Shielding Gases

www.airliquide.ca

20 360 kPa (3000 psig)

5090 kPa (830 psig)

20 360 kPa (3000 psig)

13 600 kPa (2015 psig)

20 360 kPa (3000 psig)

17 820 kPa (2640 psig)

20 360 kPa (3000 psig)

20 360 kPa (3000 psig)

17 820 kPa (2460 psig)

13 600 kPa (2015 psig)

13 600 kPa (2015 psig)

14 960 kPa (2217 psig)

30 380 kPa (4500 psig)

GMAW (MIG) welding of carbon steels in all transfer modes, short-circuit, globular, spray,

and pulsed-spray transfer.Excellent for jobs requiring painting or coating due to low-silicate formation.

GMAW (MIG) welding of stainless steels,especially in spray transfer.

MCAW (metal core) welding where low smoke is a concern.

GMAW, MCAWSteel

Short circuit, spray and pulse.

GTAW (TIG) welding of duplex and super duplex stainless steels.

GMAW (MIG) welding of all stainless steels in all transfer modes, short-circuit, globular,

spray, and pulsed-spray transfer.GMAW (MIG) welding of galvanized

carbon steels.

GMAW (MIG) welding of duplex and super duplex stainless steels.

FCAW (flux core) welding of carbon steel andstainless steel where lower smoke emissions

and increased productivity are desired.MCAW (metal core) welding of carbon steels.

GMAW (MIG) welding of carbon steels in all transfer modes.

GMAW welding of carbon steels and regular carbon level stainless steel and non-critical

stainless steel applications.MCAW welding of carbon steels

Short-circuit, spray and pulse transfer.

GTAW welding of all base metals.GMAW welding of non-ferrous metals.

Application requiring higher heat inputs or faster travel speeds compared to pure argon.

FCAW welding of carbon and stainless steels.GMAW/MCAW of carbon steel.

COMPOSITION

N2

CO2

He

N2 H2

N2 O2

He N2 CO2

He N2 CO2

He N2 CO2

He N2 CO2

He N2 CO2 CO

He N2 CO2

CO H2

He N2 CO2

CO O2 Xe

N2

Cylinder color: Maroon

The Aligal family of gases is specifically designed for the food industry. The cylindersare dedicated for use in the food and beverage industries only. Special cylinder fillingprocedures are followed in order to ensure that the strict quality standards of the foodindustry are met. Aligal is your top-of-mind gas solution from food-packaging to beerdispensing.

A-21

CGA Cylinder ConnectionsC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-20

CYLIN

DE

RG

ASE

SALIGAL Gases for the Food Industry

www.airliquide.ca

TYPICAL CYLINDERMIXTURE TYPICAL APPLICATIONS CGA SIZE VOLUME1 ITEM NUMBER PRESSURESCONNECTION m3 scf @ 15°C (70°F)

580 44 6.32 227.91 GAS-ALG144Modified atmosphere packaging of nuts, 580 (295) 160L 100.40 3620.87 GAS-ALG1160LC

ALIGAL 1potato chips, lettuce, salad mixes, coffee 580 (295) 180L 112.21 4046.86 GAS-ALG1180LC

580 (295) 240L 136.68 4929.26 GAS-ALG1240LC

37 22.68 kg 50.00 lb GAS-ALG237Modified atmosphere packaging of 160L 168 kg 370.37 lb GAS-ALG2160LC

ALIGAL 2fresh poultry, cheese, bakery products 180L 187 kg 412.26 lb GAS-ALG2180LC

240L 240 kg 529.11 lb GAS-ALG2240LC

44 6.90 248.68 GAS-ALG344Oxygenation of wine, beer, water or modified atmosphere 160L 124.06 4473.96 GAS-ALG3160LC

ALIGAL 3packaging of red meat in combination with Aligal 2 180L 138.83 5006.57 GAS-ALG3180LC

240L 169.84 6125.06 GAS-ALG3240LC

ALIGAL 5 Whipped toppings326 22 14.60 kg 32.20 lb GAS-ALG522326 44 29.30 kg 64.50 lb GAS-ALG544

Modified atmosphere packaging of prepared meals,ALIGAL 13 pizza, pasta, shredded cheese, deli products, 580 44 7.16 258.08 GAS-ALG1344

fresh salads, vegetables

Modified atmosphere packaging of prepared meals,580 44 8.59 309.64 GAS-ALG1544ALIGAL 15

pizza, pasta, bakery goods, cooked meat products

ALIGAL 28Modified atmosphere packaging of red meat

such as beef, lamb, veal, fresh sausage, shish-ka-bobs296 44 7.33 264.17 GAS-ALG2844

ALIGAL BEVERAGE Carbonated soda beverages and water 320 14AL 9.07 kg 20.00 lb GAS-ALGBEV14320 37 22.68 kg 50.00 lb GAS-ALGBEV37

ALIGAL DRAFT ALE Draft ale580 11AL 1.76 63.35 GAS-ALGALE11580 44 7.16 258.08 GAS-ALGALE44

ALIGAL DRAFT LAGER Draft lager580 11AL 2.10 75.75 GAS-ALGLAG11580 44 8.59 309.67 GAS-ALGLAG44

ALIGAL DRAFT STOUT Draft stout580 11AL 1.64 59.30 GAS-ALGSTO11580 44 6.74 242.99 GAS-ALGSTO44

ALIGAL WINE Wine tap systems580 11AL 1.53 55.32 GAS-ALGWIN11580 44 6.32 227.91 GAS-ALGWIN44

1 m3 @ 15°C; scf @ 70°F

Acetylene size 2

Carbon dioxide.825-14NGO-RH-EXT(Flat Nipple and Washer) CGA 320

Compressed air.825-14NGO-RH-EXT(Round Nipple) CGA 346

Hydrogen and Blueshield 11, 12, 14, 15

.825-14NGO-LH-EXT(Round Nipple) CGA 350

Acetylene

Flamal 29 and propane.885-14NGO-LH-INT(Bullet Nipple) CGA 510

Acetylene size 8.895-18NGO-RH-EXT(Conical Nipple) CGA 520

Argon, mixtures and all XPR cylinders

1.045-14NGO-RH-INT CGA 680

Oxygen

Argon, helium, nitrogen and mixtures

.965-14NGO-RH-INT(Bullet Nipple) CGA 580

CGA 410 CGA 540CGA 200.625-20NGO-RH-EXT(Conical Nipple)

.850-14NGO-LH-EXT(Round Nipple)

.903-14NGO-RH-EXT(Large Round Nipple)

14 960 kPa (2217 psig)

5090 kPa (830 psig)

14 960 kPa (2217 psig)

4650 kPa (745 psig)

14 175 kPa (2100 psig)

14 175 kPa (2100 psig)

14 175 kPa (2100 psig)

5090 kPa (830 psig)

14 175 kPa (2100 psig)

14 175 kPa (2100 psig)

14 175 kPa (2100 psig)

14 960 kPa (2217 psig)

320320 (320)320 (320)320 (320)

540540 (440)540 (440)540 (440)

A-23

The LABORATORY OfferC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-22

CYLIN

DE

RG

ASE

SThe LABORATORY Offer

www.airliquide.ca

Meeting the specialty gas needs of the laboratory and analysis market through innovation

and commitment to service.

Air Liquide is one of the world’s largest producers of pure gases. We closely control the quality and

consistency of the gases we produce so our customers can be sure of getting the best quality

products.

Purity Grades

Air Liquide offers several different grades of pure gases. These grade levels were established after careful study of the applications where they’re typically used. We also offer our trademark Alphagaz product line –designed to eliminate some of the complexity common to other specialtygases.

Alphagaz 2 products are recommended for those applications requiring the highest purity products. Alphagaz 1 is designed for everyday laboratoryand analytical instrument applications. Alphagaz High Purity is designed forgeneral-purpose applications where the gas purity level is not critical.Alphagaz 1000 – liquified argon or nitrogen – is recommended for applications like ICP-MS.

Alphagaz packaging

ScandinaTM Cap

Air Liquide’s distinctive SCANDINATM cap is a popular safety and convenience feature. Permanently mounted onto the cylinder, the Scandina cap protects the valve while the cylinder is in service or in transit.

Residual Pressure Valve

Alphagaz cylinders are equipped with new SMARTOPTM residual pressurevalves (RPV), designed to prevent outside air and other gases from flowingback into the cylinder. This ensures gas purity is never compromised by anycontaminants that could inadvertently enter the cylinder from outsidesources.

SMARTOPTM for ALPHAGAZTM is equipped with a built-in pressure gauges. You know exactly how much gas is remaining in the cylinder. You savetime and know if you have enough gas for your daily consumption.

Certified Analysis

Tags that clearly indicate the gas properties and levels of impurities areattached to each Alphagaz cylinder.

Alphagaz Mix

The Alphagaz Mix product line offers a wide selection of standard mixtures for a varietyof laboratory analyzers and applications. Each blend is carefully prepared and analyzedto conform to the instrument manufacturers’ specifications. Critical impurities, that mayaffect instrument performance, are strictly controlled.

Consult our specialty gas catalogue for detailed information on these special laboratory and analytical application products.

Ask your Air Liquide representative for more information about how Alphagaz can simplify your lab-gas selection process.

ALTOPTM Lab

ALTOPTM Lab is specifically designed for field analysis. ALTOPTM Lab is a portable andrefillable cylinder. You save on regulator cost and mounting time. The ALTOPTM Labmade cylinder manipulation analysis faster, easier and safer.

Equipment

We offer an expanded inventory of gas handling equipment for corrosive and noncorrosive applications. Air Liquide high-performance equipment is engineered to protect gas purity and integrity, and provide long, trouble-free service. Most equipment is in stock and ready for fast, same-day shipping.

• Regulators and ChangeOver Manifolds

• Gas Safety Cabinets

• Point-of-Use Panels

• Flowmeters, Valves and other Accessories

• Custom Gas Distribution Systems

The Top Dog in Specialty Gases Joins Air Liquide

Air Liquide operates numerous facilities in Canada and the United States for fast, on-time delivery and technical expertise on which you can rely. The addition of ScottSpecialty Gases to the Air Liquide Group reinforces our culture of innovation, safety and quality. Our combined resources enable us to offer you many new specialty gas solutions to help you increase your efficiency without sacrificing product quality or accuracy.

Innovation

The hallmark of the Air Liquide Group has always been its commitment to bringingnew technologies, ideas and innovations to its valued customers.

Continued innovations, while addressing the expanding needs of the market, are part of the Air Liquide tradition.

On-line laboratory & analysis wizard to helpyou identify the gas purity the most adapted

to your analytical needs.

ALTOPTM LAB

Also available on line at www.specialtygas.ca

Cylinder regulator

Line regulatorAlphagaz SMARTOPTM

Laboratory & AnalysisCatalogue

A-25

Cylinder CartsC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-24

CYLIN

DE

RG

ASE

SCylinder CartsCarts

www.airliquide.ca

Compressed gas cylinders can be hazardous. Precautions must be observed when storing,

handling and moving compressed gas cylinders.

When moving a cylinder, all the valves should be closed, the regulator removed and the valve cap

installed unless using Altop or Minitop cylinders.

Air Liquide offers strong and compact carts with excellent balance and maneuverability. All models feature a cylinder hold-downchain and some are equipped with a toolbox.

The MET-RVJUMBOSECURPLUS model handles large cylinders and is ideal for construction jobs or large shops. Designed withhigh-floor clearance to move easily over rough surfaces or cluttered areas, it is equipped with an extra-large tool box and a cylinderhold-down chain.

ITEM NUMBER*WHEEL DIAMETER

CYLINDER SIZEHEIGHT WIDTH WEIGHT

AND TYPE mm in mm in kg lb

MET-RV4422R254 mm (10”)

Oxy 44 and Ace 23 914 36 635 25 12.7 28Semi-pneumatic wheels

MET-RV4422BR254 mm (10”)

Oxy 44 and Ace 23 978 38 1/2 445 17 1/2 11.8 26Semi-pneumatic wheels

MET-RV6944R355 mm (14”)

Oxy 44 and Ace 69 1041 41 768 30 1/4 18.6 41Semi-pneumatic wheels

MET-RV98/MET-RV98C**152 mm (6”)

Oxy 9 and Ace 8 991 39 489 19 1/4 5 11Semi-pneumatic wheels

254 mm (10”) Semi-pneumatic wheelsMET-RV44MRB2 with 3” back wheel and brake. Better Nitrogen 50 or 50 XPR 1118 44 432 17 11.8 26

safety: cart designed for better stability

MET-RVJUMBOSECURPLUS533 mm (21”),

Oxy 44 and Ace 69 1143 45 1016 40 68 150Pneumatic wheels with hub

* Other models are available on request.** With toolbox

MET-RV4422RMET-RV6944R

MET-RV4422BR MET-RV98

MET-RV44MRB2

MET-RVJUMBOSECURPLUSMET-RVALTOP

MET-RVALTOPB1

MET-RVMINITOP

MET-RVDUO

MET-RVDUOJR

ALC-DUOMINIMET-RV8

CYLINDER SIZE CART CART CARTNAME ITEM NUMBER CHARACTERISTICS HEIGHT WIDTH WEIGHT

OXYGEN ACETYLENE mm in mm in kg lb

“B” TANK CART MET-RV8 – 2 610 24 152 6 1.8 4

OXY-FUEL MINI DUO ALC-DUOMINI 4 2 597 23.5 330 13 0.9 2

OXY-FUELJUNIOR DUO

MET-RVDUOJR 9 8 991 39 489 19.25 5.9 13

OXY-FUEL DUO MET-RVDUO 16 14 1143 45 635 25 16.8 37

MINITOP DUO MET-RVMINITOP 9 8 1118 44 483 19 9.1 20

MET-RVALTOPALTOP DUO

MET-RVALTOPB144 23 1143 45 584 23 16.8 37

NOTE: We recommend the combination of oxy-acetylene duos with the corresponding Blueshield welding and cutting outfits (contact your Air Liquide representative).

“B” tank cylinder cart.

Oxy-acetylene cylinders in portable plasticcarrying case, comes with complete outfit(see gas apparatus section for more info).

Easy transportation with special locking device keeping cylinders

in place at top and bottom.For cylinders with tulip caps.

Transport cylinders safely and easily with this cart keepingcylinders locked firmly in their place. For cylinders equippedwith tulip caps. Special support position in the back of cart

when it is in horizontal position. Lockable toolbox.Hooks on cart for oxy-acetylene hoses.

Cart for Minitop cylinders.Special features: retractable handle, safety belt.

Cart for Altop cylinders.Special features: elevation for acetylene cylinders,

safety belt, lockable toolbox and 3rd wheel for better stability on B1 model.

A-27

Cylinder Wall Brackets and Replacement WheelsC

YLIN

DE

RG

ASE

S

1-800-817-7697

A-26

CYLIN

DE

RG

ASE

SMagnetic Cylinder Carts

www.airliquide.ca

The magnetic cylinder cart is an innovation exclusive

to Air Liquide.

ALC-80920090

ALC-80920080

Features:

• Lightweight aluminum construction

• Equipped with powerful magnets

• Single cylinder cartBoxed dimensions for shipping: 635 x 457 x 1372 mm (25” x 18” x 54”)Weight: 28 kg (62 lb)

• Double cylinder cartBoxed dimensions for shipping: 635 x 635 x 1372 mm (25” x 25” x 54”)Weight: 44 kg (97 lb)

Benefits:

• Greatly reduced handling time

• No chains needed to secure cylinders

• Helps reduce possible injuries when moving or handling gas cylinders

• Reduced likelihood of damage to the cylinder shut-off valves

• Maximum convenience and control to transport your cylinders

Applications:

• Large metal fabrication shops

• Cylinder transportation (N2 for tires)

• Hospitals

• Hospitality services

The magnetic cylinder cart allows cylinders to be moved quickly, easily and safely.

ITEM NUMBER DESCRIPTION

MET-RV19 Cylinder Wall Bracket, for one Size 9 max., with Nylon Strap

MET-RV19C Cylinder Wall Bracket, for one Size 9 max., with Chain.

MET-RV115 Cylinder Wall Bracket, for one 15” max., with Nylon Strap

MET-RV115C Cylinder Wall Bracket, for two Size 15 max., with Chain.

MET-RV29 Cylinder Wall Bracket, for two Size 9 max., with Nylon Strap

MET-RV29C Cylinder Wall Bracket, for two Size 9 max., with Chain.

ITEM NUMBER DESCRIPTION

MET-RV15F 254 mm (10”) foam cylinder cart wheels

MET-RV16F 406 mm (16”) foam cylinder cart wheels

• Contour structure enables cylinders to firmly fit along the support edge

• Sturdy chain or nylon strap is easily adjustable

• Recessed screw holes on the bracket sides allow easy wall mounting

• Suitable for cylinders up to 381 mm (15”) diameter

Replacement Wheels

These replacement wheels are foam filled so cart tires never flatten and always rollsmoothly.

Cylinder Wall Brackets

Air Liquide’s wall-mount cylinder brackets are designed to hold

gas cylinders safely in place.

Note: Steel, pneumatic and semi-pneumatic wheels are also available. MET-RV16MET-RV15

Safety panel for cylindercages (can be ordered

on request)

CYLIN

DE

RG

ASE

SCylinder Cages

Benefits:Lockable gas cylinder cage

Expanded metal sides provide required ventilation

Heavy-duty construction

• Fully welded and shipped assembled

• Ready-to-ship standard sizes

• Custom sizes available: gas cylinder cages can be made to your specifications

Air Liquide offers secure cylinder cages for industrial gases and propane. These tough cages

provide storage for gas cylinders while protecting them from damage, theft and unauthorized access.

Industrial Cylinder CagesITEM NUMBER* DESCRIPTION CAGE HEIGHT

MET-RV212C Cage, Industrial Cylinder, 2 Cyl, 2’ x 1’ x 6’ 1.83 m (6’)





MET-RV4312 Cage, Industrial Cylinder, 24 Cyl, 6’ x 4’ x 6’ 1.83 m (6’)

MET-RV6424C Cage, Industrial Cylinder, 24 Cyl, 6’ x 4’ x 6’ 1.98 m (78”) front, 1.83 m (72”) back




Propane Cylinder CagesITEM NUMBER* DESCRIPTION

MET-2C2001 Cage, Propane 9.1 kg (20 lb) Cylinder, 2 Cyl

MET-RV4C2002 Cage, Propane 9.1 kg (20 lb) Cylinder, 4 Cyl, 2 Storey-High

MET-24C2003 Cage, Propane 9.1 kg (20 lb) Cylinder, 24 Cyl

MET-RV4C33 Cage, Propane 15 kg (33 lb) Cylinder, 4 Cyl






* Item number meaning: MET-RV212

Floor size, 2’ x 1’ in this caseNumber of cylinders that fit in cage

* Item number meaning: MET-2C2001

Number of cylinders that fit in cageCylinder size

1

2

3

1

2

4

3

MET-RV326C

3’ x 2’ floor size6 cylinders fit in cage

A-28

www.airliquide.ca

1100-section cylinder gases - blueshield · ... for higher volume, reducing number of cylinder...

Documents