11. processing and fabrication orientation of molecular and fibers
TRANSCRIPT
11. Processing and fabrication
Orientation of molecular and fibers
- Contact pressure
- Dead load
Reinforced thermoset processing
• Laminating
- Vacuum Bagging
- Elastic tape
- Shrink tape, sleeving, or fibers
- Autoclave
- Hydroclaves
- Inflatable bags
- Spray layup
- Press molding
- Silicone rubbers
- Laminated injection molding
• Filament winding
• Three dimensional reinforcement
• Prepregs
• Molding thermosets
- Compression molding
- Transfer molding
- Injection molding thermosets
• Reaction injection molding
• Casting
• Cure cycles
• Curing rate
• Curing cure
Thermoplastic processing
• Injection molding
• Extrusion
• Blow molding
1. Extrusion blow molding
2. Injection blow molding 3. Stretch blow molding
4. Blow molding materials
• Rotational molding
• Compression molding thermoplastics
• Vacuum forming
• Films
- Cast films
- Calendering
- Extrudeed flims
• Extrusion coating
• Thermoplastic foaming processing
- Polystyrene
- Polyvinyl chloride
- Engineering thermoplastic foam
Molds
Mixing equipment
• Blending and compounding
- Blenders
- Intensive mixing dispersers
- Roll mills
• Automatic mixing dispensing
• Polyester spraying
• Polyurethane foam spraying
• Polyurethane foam pouring
• Portable foam packs
• Urea formaldehyde foaming
Adhesive application