11 margrave updatestothedodstandarddesignforpressurizedhydrantfuelingsystemtypeiii

7/27/2019 11 Margrave UpdatestotheDoDStandardDesignforPressurizedHydrantFuelingSystemTypeIII

1/70

US Army Corps of Engineers

Jimmy Brasch (Support)

Omaha District

Omaha, Nebraska

PETRO 2011

Craig Margrave

Updates to the DoD Standard Design for

Pressurized Hydrant Fueling Systems

Type III, IV, V, and Cut and Cover


2/70

Type III (July 2010) Design No. 078-24-28

Type IV and V (July 2010) Design No. 078-24-29

Cut and Cover (July 2010) Design No. 078-24-33

AST (to be discussed by others)

These standards and more are available from:

US Army Corps of Engineers

Engineering and Support Center, HuntsvilleFacilities Standardization Program

http://www.hnd.usace.army.mil/stddgn

(click on Library Search then Find All Designs)

Updated Standards
http://www.hnd.usace.army.mil/stddgnhttp://www.hnd.usace.army.mil/stddgn


3/70

Design Number 078-24-28

Latest update dated July 2010, previous update 1998.

Forty drawings were added mostly because of the change in

drawing size, but there are many additional details.

DEPARTMENT OF DEFENSE

PRESSURIZED HYDRANT FUELING SYSTEM

TYPE III


4/70

TYPE III


5/70

TYPE III


6/70

TYPE III - Updates Site Flow Indicators

deleted from most of

the system.

The Filter Separator

pressure relief piping

was rerouted from the

product recovery tank

(PRT) to a day tank.

Control Room wall

revised from 1 to 2 hr

Fire Rating.

Fire shutter and

observation windows

replaced with fire

rated glass systems.


7/70

TYPE III Fire Rated Assembly


8/70

TYPE III - Updates A Fire Detection/

Suppression System

requirement note wasadded.

FSR-1 hinge location

changed from the right

to the left side to

eliminate conflict with

pipe support.

Surge Tanks were

added.


9/70

TYPE III FSR-1


10/70

TYPE III FSR-1


11/70

TYPE III Surge Tanks


12/70

TYPE III Surge Tanks


13/70

TYPE III Micronic Pre-Filter Added


14/70

TYPE III Micronic Pre-Filter Added

Basket Strainer

60 Mesh254 Micron

Twice the size of a

grain of salt

Micronic Pre-Filter

5 Micron

Receipt Filter

Separator

0.4 Micron


15/70

Cold Water

Hot Water

Shower

Mixing Valve

Eye Wash

Circulation Pump (not shown)

Emergency Shower, Tempered Water


16/70

Tightness Test Mode

(Leak Detection)

Type III Leak Detection Added


17/70

TYPE III Leak Detection Added


18/70

TYPE III Computer Upgrade


19/70

TYPE III Graphics Display


20/70

TYPE III Annunciator Panel


21/70

TYPE III Four Valve Supervision


22/70

TYPE III Shut Down Sequence


23/70

TYPE III ATG (Automatic Tank Gauge)


24/70

TYPE III Additive Injector


25/70

TYPE III Additive Injector


26/70

TYPE III Site


27/70

TYPE III Trench Drain


28/70

TYPE III Site


29/70

TYPE III Site


30/70

TYPE III Site


31/70

TYPE III Site


32/70

TYPE III Site


33/70

TYPE III Site


34/70

TYPE III Site


35/70

TYPE III - Site


36/70

TYPE III Signage


37/70

TYPE III Truck Offload


38/70

TYPE III Truck Offload


39/70


Latest update dated July 2010, previous update 1991.

Forty two drawings were added mostly because of the change in

drawing size, but there are many additional details.

DEPARTMENT OF DEFENSE STANDARD

PRESSURIZED HYDRANT DIRECT FUELING SYSTEM

TYPE IV AND V


40/70

TYPE IV


41/70

TYPE IV


42/70

TYPE V


43/70


Provided for the first time as a standard in July 2010.

DEPARTMENT OF DEFENSE

CUTNCOVER STANDARDS

STORAGE TANK/PUMPHOUSE

AND FILTER BUILDING


44/70

Cut and Cover


45/70

Cut and Cover


46/70

Cut and Cover


47/70

Cut and Cover


48/70

Cut and Cover


49/70

Cut and Cover


50/70

Cut and Cover


51/70

Cut and Cover

C d C


52/70

Cut and Cover

C t d C


53/70

Cut and Cover

C t d C


54/70

Cut and Cover

C t d C


55/70

Cut and Cover

C t d C


56/70

Cut and Cover

C t d C


57/70

Cut and Cover

C t d C


58/70

Cut and Cover

C t d C


59/70

Cut and Cover

C t d C


60/70

Cut and Cover

C t and Co er


61/70

Cut and Cover

Cut and Cover


62/70

Cut and Cover

Cut and Cover


63/70

Cut and Cover

Cut and Cover


64/70

Cut and Cover

Cut and Cover


65/70

Cut and Cover

Cut and Cover


66/70

Cut and Cover

Cut and Cover


67/70

Cut and Cover

Cut and Cover


68/70

Cut and Cover

Specifications


69/70

00 22 00 Proposal Instructions, Submission Requirements and Evaluation

01 33 00 Submittal Procedures (June 2010)

01 33 23.33 Aviation Fuel System Specific Submittal Requirements (Feb 2010) 01 42 00 Sources For Reference Publications (May 2009)

01 78 23.33 Operation And Maintenance Manuals for Aviation Fuel Systems (Feb 2010)

05 59 10 Rolling Cover for Aviation Refueling Vaults (Feb 2010)

33 01 50.01 Cleaning Fuel Storage Tanks (Feb 2010)

33 08 53 Aviation Fuel Distribution System Start-Up (Feb 2010)

33 08 53at Checklist for Equipment Test (Feb 2010)

33 09 53 Aviation Fuel Pump Control and Annunciation System (Feb 2010) 33 09 54 Aviation Fuel Pump Control and Annunciation System (Type [IV][V]) (Feb 2010)

33 09 55 Aviation Fuel Pump Control and Annunciation Sys (Cut-N-Cover Tanks) (Feb 2010)

33 52 43.11 Aviation Fuel Mechanical Equipment (Feb 2010)

33 52 43.12 Aviation Fuel Pantographs (Feb 2010)

33 52 43.13 Aviation Fuel Piping (Feb 2010)

33 52 43.14 Aviation Fuel Control Valves (Feb 2010)

33 52 43.23 Aviation Fuel Pumps (Feb 2010) 33 52 43.28 Filter Separator, Aviation Fueling System (Feb 2010)

The specifications are available from the Whole Building Design Guide (WBDG) at:

www.wbdg.org/ccb

Click on Unified Facilities Guide Specifications (UFGS) under the Specifications Library

Specifications

Conclusion
http://www.wbdg.org/ccbhttp://www.wbdg.org/ccb


70/70

Type III (July 2010) Design No. 078-24-28

Type IV and V (July 2010) Design No. 078-24-29

Cut and Cover (July 2010) Design No. 078-24-33

http://www.hnd.usace.army.mil/stddgn

(Click on Library Search then Find All Designs)

The specifications are available from the Whole Building Design Guide(WBDG) at:

www.wbdg.org/ccb

(Click on Unified Fac Guide Specs (UFGS) under the Specs Library)

Thank You,

[email protected] [email protected]

Omaha District Corps of Engineers Omaha District Corps of Engineers

POL-DX POL-DX

Conclusion
http://www.hnd.usace.army.mil/stddgnhttp://www.wbdg.org/ccbhttp://www.wbdg.org/ccbhttp://www.hnd.usace.army.mil/stddgn

11 margrave updatestothedodstandarddesignforpressurizedhydrantfuelingsystemtypeiii

Documents