11 coll programm für druck - tae.de · group v basestocks on the rise – unconventional base...
TRANSCRIPT
4
28 Jan 2020 Tuesday
Morning P-1
Session:
Opening and Plenary Session (1)
Chair: C. Wincierz Evonik Resource Efficiency GmbH, Germany
09:00 – 09:30 Werner Schollenberger CEO Technische Akademie Esslingen e.V., Germany Opening Christoph Bolay Lord Mayor City of Ostfildern, Germany Welcome Address
09:30 – 10:00 Lutz Lindemann FUCHS PETROLUB SE, Germany The Lubricants Industry in Light of the Macroeconomic Environment
10:00 – 10:30 Michael Duncan STLE-President, Daubert Chemical Company, USA Edward Salek Society of Tribologists and Lubrication Engineers, USA Emerging Issues and Trends in Tribology and Lubrication Engineering
10:30 – 11:00 Break – Exhibition
11:00 – 11:30 Arup Gangopadhyay, Prasad Dev Hanumalagutti Ford Motor Company, USA Driveline Fluid Opportunities for HEV/EV Vehicles
11:30 – 12:00 Jeff Hemphill Schaeffler Group North America, USA Impact of Tribology on Vehicle Electrification
12:00 – 12:30 Michael Carus nova-Institut GmbH, Germany Sustainability Analysis – from Brundtland to VDI
12:30 – 14:00 Break – Exhibition
5
28 Jan 2020 Tuesday
Afternoon A-1
Session:
Base Oil Technology (1)
Chair: L. Lindemann Fuchs Petrolub SE, Germany
14:00 – 14:30 Thomas Norrby, Jinxia Li Nynas AB, Sweden Ultra-Low Viscosity Naphthenic Base Oils for Industrial Lubricants
14:30 – 15:00 Claire Ward Croda Europe Ltd, United Kingdom Liquid Amides – Novel, High Performance Base Oils
15:00 – 15:30 Frank Rittig, René Koschabek, Henrik Heinemann, Uwe Förster, Andreas Minke, Edith Tuzyna BASF SE, Germany Group V Basestocks on the Rise – Unconventional Base Stocks for more Sustainable Lubrication
15:30 – 16:00 Break – Exhibition
6
28 Jan 2020 Tuesday
Afternoon A-2
Session:
Testing (1)
Chair:
A. Pauschitz AC2T research GmbH, Austria
14:00 – 14:30 Fabio Alemanno, Deepak Halenahally Veeregowda Ducom Instruments Europe B.V., The Netherlands How to Relate Lubricants Failure to its Behavior at Microscale
14:30 – 15:00 Bernardo Tormos, Vicente Macian, Antonio García-Barberá, Universitat Politecnica de Valencia, Spain Tomas Perez Repsol, Spain Long-Term Real World Test for Engine Oils: Performance, Engine Problems and Fuel Economy
15:00 – 15:30 Nicole Dörr, Adam Agocs, Andjelka Ristic, Serhiy Budnyk, Charlotte Besser, ,Marcella Frauscher AC2T research GmbH, Austria Impact of Engine Oil Degradation on Lubrication Performance Studied by the Lab-to-Field Approach
15:30 – 16:00 Break – Exhibition
7
28 Jan 2020 Tuesday
Afternoon A-3
Session:
Additives (1)
Chair:
C. Wincierz Evonik Resource Efficiency GmbH, Germany
14:00 – 14:30 Siegfried Lucazeau NYCO, France High Performance Anti-Oxidants for Synthetic Esters
14:30 – 15:00 Jinxia Li Nynas AB, Sweden Thorsten Schoeppe, Marcel Harhausen BASF SE, Germany Anti-Oxidant Expression in Heavy Naphthenic Base Oils
15:00 – 15:30 Jerome Desire Aliebakaa Kpan Coburg University of Applied Sciences, Germany Jürgen Krahl Ostwestfalen-Lippe University of Applied Sciences and Arts, Germany Impact of Adsorbents on Oxidative Stability of Biodiesel and the Deterioration of Engine Oil
15:30 – 16:00 Break – Exhibition
8
28 Jan 2020 Tuesday
Afternoon A-4
Session:
Greases (1)
Chair:
M. Fatih.Najafi Nynas AB, Sweden
14:00 – 14:30 Dirk Rettemeyer Idemitsu Lube Europe GmbH, Germany Nano Structure Urea Grease with New Performance Level
14:30 – 15:00 Kirsten Schwörer, Kristina Görmer BP Europa SE, Germany Jonathan Leather, David Di Nunzio Castrol Industrial North America, USA New Wind Turbine Bearing Grease Development
15:00 – 15:30 David Gonçalves INEGI, Portugal Jorge Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal Armando V. Campos Instituto superior de engenharia do politécnico do Porto, Portugal Grease Influence on Constant Velocity Joint Performance
15:30 – 16:00 Break – Exhibition
9
28 Jan 2020 Tuesday
Afternoon A-5
Session:
Seals
Chair:
N. Brunetière Institut Pprime - UPR 3346, France
14:00 – 14:30 Noël Brunetière Institut Pprime - UPR 3346, France Can we Predict the Behavior of Mechanical Seals?
14:30 – 15:00 Gert Wahl Schunk Kohlenstofftechnik GmbH, Germany Philipp Gingter, Sebastian Liebisch Schunk Ingenieurkeramik GmbH, Germany 3D-Printed Silicon Carbide Ceramics Open New Opportunities for the Design of Mechanical Seals
15:00 – 15:30 Christoph Burkhart, Kevin Peter, Stefan Thielen, Bernd Sauer TU Kaiserslautern, Germany Online Determination of Pumping Values of Radial Shaft Seals and their Tribological System
15:30 – 16:00 Break – Exhibition
10
28 Jan 2020 Tuesday
Afternoon A-6
Session:
Sliding Bearings
Chair:
M. Gaule Hermann Bantleon GmbH, Germany
14:00 – 14:30 Florian König, Georg Jacobs, Christopher Sous RWTH Aachen University, Germany Emmanuel Georgiou, Dirk Drees FALEX Tribology, Belgium Suitability of Wear Coefficients from Tribometer Testing for Wear Prediction in Sliding Bearings
14:30 – 15:00 Christian Stelzer CADFEM GmbH, Germany Vincent Hoffmann Tribo Technologies GmbH, Magdeburg Dirk Bartel Otto-von-Guericke-Universität Magdeburg, Germany Designing a Heavily Loaded Journal Bearing by Usage of Multi-Parameter-Optimization
15:00 – 15:30 Shalem Indrupati, Achim Frick Hochschule Aalen, Germany A Study of Injection Molding Induced Tribological Behavior of Polyoxymethylene Copolymer
15:30 – 16:00 Break – Exhibition
11
28 Jan 2020 Tuesday
Afternoon A-7
Session:
Molecular Dynamics
Chair:
M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany
14:00 – 14:30 Takuya Kuwahara, Gianpietro Moras, Michael Moseler Fraunhofer Institute for Mechanics of Materials, Germany Atomistic Simulations of Tetrahedral Amorphous Carbon in Boundary Lubrication
14:30 – 15:00 Gianpietro Moras Fraunhofer IWM, Germany Surface Termination in Dry Friction: Atomic-Scale Insights from Computer Simulations
15:00 – 15:30 Stefan Eder AC2T research GmbH, Austria Ashlie Martini, Karen Mohammadtaba University of California, USA Nicole Dörr AC2T research GmbH Effects of Heat, Load and Shear on Film Formation Deconvoluted by Reactive Molecular Dynamics
15:30 – 16:00 Break – Exhibition
12
28 Jan 2020 Tuesday
Afternoon A-8
Session:
Oil Analysis (1)
Chair:
R. Krethe Oelcheck GmbH, Germany
14:00 – 14:30 Thomas Fischer, Stefan Mitterer OELCHECK GmbH, Germany Monitoring of Nonferrous Metal Passivators – Proactive Copper Wear Detection in Wind Turbines – Part 1
14:30 – 15:00 Stefan Mitterer, Thomas Fischer OELCHECK GmbH, Germany Monitoring of Nonferrous Metal Passivators – Proactive Copper Wear Detection in Wind Turbines – Part 2
15:00 – 15:30 Lin Wang, David Holt, Derek Selby ExxonMobil, USA The Impacts of Solvent Dilution on Removing Antifoam Droplets for Automatic Particle Counting
15:30 – 16:00 Break – Exhibition
13
28 Jan 2020 Tuesday
Afternoon B-1
Session:
Base Oils (2)
Chair:
M. Frauscher AC2T research GmbH, Austria
16:00 – 16:30 Martin Greaves Dow Europe GmbH, Switzerland Edward Daugs Dow Chemical Company, USA Ken Han Dow Chemical Company, China Ultra-Low Viscosity Polyalkylene Glycols for Transportation Lubricants
16:30 – 17:00 Dimitrios Karonis, Maria Papadopoulou, Maria Komiotou, George S. Dodos National Technical University of Athens, Greece Evaluation of Base Oils Production from Hydrocracker Residue with Solvent Refining
18:00 Come Together with Snacks and Beverages
14
28 Jan 2020 Tuesday
Afternoon B-2
Session:
Testing (2)
Chair:
A. Pauschitz AC2T research GmbH, Austria
16:00 – 16:30 Etienne Macron, Christophe Heau, Johnny Dufils IREIS -- Institut de Recherche En Ingénierie des Surfaces, France Multiscale Approach for Tribological Testing Supporting Automotive Components Development
16:30 – 17:00 Stephan Emmrich, Dirk Bartel Otto von Guericke University Magdeburg, Germany Marcel Plogmeyer Fraunhofer Institute for Surface Engineering and Thin Films, Germany Designing of a Thin-Film Transducer for Temperature Measurement in Mixed Lubrication
17:00 – 17:30 Oday I. Abdullah, Josef Schlattmann Hamburg University of Technology Hazim U. Jamali, Amjad Al-Hamood University of Kerbala, Iraq Adolfo Senatore University of Salerno, Italy Elastohydrodynamic Lubrication Analysis of a Modified Cam with Fat Faced Follower
17:30 – 18:00 Peter Kollegger Engineering Office for Mechanical Engineering and Technical Geology, Austria Test Design Based on Comprehensive Cause and Effects Matrix Analysis
18:00 Come Together with Snacks and Beverages
15
28 Jan 2020 Tuesday
Afternoon B-3
Session:
Additives (2)
Chair:
N. Dörr AC2T research GmbH, Austria
16:00 – 16:30 David Boudreau Vanderbilt Chemicals LLC, USA Hydroxylated Alkyl Phosphate Esters as Lubricant Additives
16:30 – 17:00 Benoît Thiébaut, Catherine Charrin, Nemanja Drazevicanin TOTAL MS, France Molybdenum Based Friction Modifier: Improving Tribochemical Process to Optimize Fuel Economy
17:00 – 17:30 Ted McClure Sea-Land Chemical Company, USA Metalworking Lubricant Additive Response Comparisons on Aluminum Alloys Using Twist Compression (TCT) and Tapping Torque Tests
18:00 Come Together with Snacks and Beverages
16
28 Jan 2020 Tuesday
Afternoon B-4
Session:
Greases (2)
Chair:
M. Matzke Robert Bosch GmbH, Germany
16:00 – 16:30 Igor Mass, Andreas Hoppermann Hochschule Niederrhein, Germany Hubertus Murrenhoff RWTH Aachen Univeristy, Germany- Experimental Studies on the Fluid Flow of Greases in Hydrostatic Thrust Bearings
16:30 – 17:00 Guillaume Notheaux, Claire Felix SEQENS (ex PCAS), France Fully Customizable Calcium Sulfonate Greases for Optimum Perform
17:00 – 17:30 Paolo Falzoni Kinolt GmbH, Germany Simon Eiden, Klaus Lucka TEC4FUELS GmbH, Germany Development of a Grease-Hardening Test – Falzoni-Voigt-Test
17:30 – 18:00 Mehdi Fathi-Najafi, Jinxia Li Nynas AB, Sweden Ameneh Schneider Optimol Instruments Prüftechnik GmbH, Germany The Impact of Viscosity of Naphthenic Oils on Different Type of Greases
18:00 Come Together with Snacks and Beverages
17
28 Jan 2020 Tuesday
Afternoon B-5
Session:
Materials
Chair:
C. Greiner Karlsruhe Institute for Technology (KIT), Germany
16:00 – 16:30 Aleks Vrcek, Tobias Hultqvist, Pär Marklund, Roland Larsson Luleå University of Technology, Sweden Tomas Johannesson Volvo Cars Corporation, Sweden Tribological Characterisation of Potential Crankshaft Bearing Steels for Roller Bearing Engine
16:30 – 17:00 Romain Montélimard HEF Groupe, France PVD Coatings on Sliding Finger Followers for Internal Combustion Engines
17:00 – 17:30 Deepak Kumar, Jayant Jain, Nitya Nand Gosvami Indian Institute of Technology, India Nano Scale Tribological Behavior of AZ91 Alloy under Dry and Lubricated Conditions
17:30 – 18:00 Prashant Mittal, Nitya Nand Gosvami Indian Institute of Technology, India In Situ Nanoscale Study on ADC12 in Lubricated Contacts Containing ZDDP and MoDTC
18:00 Come Together with Snacks and Beverages
18
28 Jan 2020 Tuesday
Afternoon B-6
Session:
Friction and Wear
Chair:
J. Molter Kompetenzzentrum Tribologie, Germany
16:00 – 16:30 Robert Teichert, Matthias Kröger TU Bergakademie Freiberg, Germany Friction Coefficient Control by Active Viscosity Mixing
16:30 – 17:00 Enrico Gnecco, Jana Hennig, Alper Özogul Friedrich Schiller University Jena, Germany Pedro J. Martinez, Juan J. Mazo University of Zaragoza, Spain The Role of Elastic Instabilities in Early Stages of Plastic and Abrasive Wear
17:00 – 17:30 Chengwei Wen, Xianghui Meng Shanghai Jiao Tong University, China Measurement of Piston Assembly Friction with Wireless IMEP Method under Fired Conditions
18:00 Come Together with Snacks and Beverages
19
28 Jan 2020 Tuesday
Afternoon B-7
Session:
Reliability / Lifetime
Chair:
J. Schöfer Robert Bosch GmbH, Germany
16:00 – 16:30 Jörg Schöfer Robert Bosch GmbH, Germany Design for Reliability – a Methodical Approach for Tribological Systems
16:30 – 17:00 Guillermo E. Morales-Espejel SKF Research and Technology Development, The Netherlands LaMCoS INSA de Lyon, France Tribological Performance of Hybrid Rolling Bearings
17:00 – 17:30 Michael Gleß Technische Akademie Esslingen e.V., Germany Reliability Prediction of Concentrated Electrical and Tribological Contacts, Considering Wear Mechanism and Acceleration Possibilities
17:30 – 18:00 Amir Kadiric, Pawel Rycerz, Benjamin Wainwright, Mao Ueda Imperial College London, United Kingdom Micropitting in Rolling-Sliding Contacts: Influencing Factors and Mechanisms of their Action
18:00 Come Together with Snacks and Beverages
20
28 Jan 2020 Tuesday
Afternoon B-8
Session:
Condition Monitoring
Chair:
R. Krethe Oelcheck GmbH, Germany
16:00 – 16:30 Rüdiger Krethe. Thomas Fischer OilDoc GmbH, Germany A New Method for Oxidation Detection in Hydraulic and Lubricating Oils
16:30 – 17:00 John K. Duchowski, Valérie Diehl-Klein, Andrei Wenze HYDAC FluidCareCenter GmbH, Germany Oil Conductivity: An Early Indicator of Oil and Additive Degradation Processes
17:00 – 17:30 Ameneh Schneider, Alexander Waller Optimol Instruments Prüftechnik GmbH, Germany Extending Lubricant Condition Monitoring by Tribotesting Results
17:30 – 18:00 Knut Wantzen, Albert Albers IPEK – Institute of Product Engineering at Karlsruhe Institute of Technology (KIT) Method to Develop Condition Monitoring Systems Based on Acoustic Emission Measurement Technique
18:00 Come Together with Snacks and Beverages
21
28 Jan 2020 Tuesday
Afternoon B-9
Session:
Gas Bearings (2)
Chair:
A. Vogt Robert Bosch GmbH, Germany
16:00 – 16:30 Federico Colombo, Luigi Lentini, Terenziano Raparelli, Andrea Trivella, Vladimir Viktorov Politecnico di Torino, Italy The Effect of the Supply Holes Disposition on the Performance of Aerostatic Pads
16:30 – 17:00 Yao Lu, Domeniek Reynaerts, Farid Al-Bender KU Leuven, Belgium Stabilization of Air-Bearing System with Tuned Mass Damper Inside the Shaft
17:00 – 17:30 Yao Lu, Marius Naaburs, Domeniek Reynaerts, Farid Al-Bender KU Leuven, Belgium Stabilization of Ultra-High-Speed Air Bearings with Shunted Piezoceramics
17:30 – 18:00 Yao Lu, Domeniek Reynaerts, Farid Al-Bender KU Leuven, Belgium Application of Magnetic Damper to the Stabilization of Air Bearings
18:00 Come Together with Snacks and Beverages
22
29 Jan 2020 Wednesday
Morning Room 1 P-2
Session:
Plenary Session (2)
Chair:
A. Fatemi Robert Bosch GmbH, Germany
09:00 – 09:30 Philippe Vergne, Pauline Cusseau,, Laetitia Martinie, David Philippon, Nicolas Devaux, LaMCoS - CNRS - INSA Lyon, France Fanny Briand TOTAL, France Relationship between Film Forming Capability and Rheology of Lubricants with VI Improvers
09:30 – 10:00 Amir Kadiric Imperial College London, United Kingdom Rolling Contact Fatigue: Pits, Cracks and Spalls
10:00 – 10:30 Nicolas Argibay, Michael Chandross Sandia National Laboratories, USA New Insights Into Alloy Design for Tribological Applications
10:30 – 11:00 Break – Exhibition
23
29 Jan 2020 Wednesday
Morning C-1
Session:
Lubricants (1)
Chair:
M. Jungk MJ Tribology, Germany
11:00 – 11:30 Michael Blumenfeld EMRE, USA Sulfur Syndrome: Limiting Oil Drain Intervals in Wind Turbine Main Gearbox Lubricants
11:30 – 12:00 Faried Makansi RWTH Aachen University, Germany Johannes Sossenheimer, Lars Petruschke, Eberhard Abele Technische Universität Darmstadt, Germany Christoph Wincierz, Michael Alibert Evonik Resource Efficiency GmbH, Germany Influence Analysis of the Viscosity of Hydraulic Fluids on the Energy Consumption of Machine Tools
12:00 – 12:30 George S. Dodos Eldon's S.A., Greece Varnish Potential Analysis of Turbine Oils
12:30 – 14:00 Break – Exhibition
24
29 Jan 2020 Wednesday
Morning C-2
Session:
Engine Tribology (1)
Chair:
M. Fox University of Bradford, United Kingdom
11:00 – 11:30 Paula Ussa, Benoit Thiebaut, Frederic Jarnias, Romuald Botel, Catherine Charrin Total, France Lubricant Impact on the Friction Reduction of Improved Mechanical Parts
11:30 – 12:00 Bernardo Tormos, Raul Payri, Marcos Carreres, Carlos Moreno Universitat Politecnica de Valencia, Spain Beatriz Dominguez, María Dolores Cárdenas Repsol, ,Spain Experimental Study on the Impact of the Engine Oil Reactivity on LSPI
12:00 – 12:30 Eduardo Tomanik, Francisco Profito, University of Sao Paulo, Brazil Wieslaw Graboń Rzeszow University of Technology, Poland Effect of the Coated Bore Pores on the Piston Ring Tribology through Deterministic Simulation
12:30 – 14:00 Break – Exhibition and Poster Session
25
29 Jan 2020 Wednesday
Morning C-3
Session:
Additives (3)
Chair:
M. Fies BASF SE, German
11:00 – 11:30 Christelle Chretien Solvay, USA, Introducing Polymeric Anti-Wear Technology for High-Performance Lubricants
11:30 – 12:00 Andrew Schwarz Infineum UK Ltd., United Kingdom Development of New Lubricant Additives
12:00 – 12:30 Mao Ueda, Amir Kadiric, Hugh Spikes Department of Mechanical Engineering, Imperial College London, United Kingdom On the Crystallinity and Durability of ZDDP Tribofilm
12:30 – 14:00 Break – Exhibition
26
29 Jan 2020 Wednesday
Morning C-4
Session:
Lubrication Fundamentals (1)
Chair:
J. Müllers Robert Bosch GmbH, Germany
11:00 – 11:30 Jonny Hansen, Marcus Björling, Roland Larsson Luleå University of Technology, Sweden Lubricant Film Formation in Rough EHL Contacts
11:30 – 12:00 Dennis Fischer, Georg Jacobs, Andreas Stratmann Institute for Machine Elements and Systems Engineering, Germany Effect of Thickener Type in Lubricating Greases on the Film Formation in EHD Contacts
12:00 – 12:30 Roland Larsson, Tobias Hultqvist, Jonny Hansen, Marcus Björling, Pär Marklund Luleå University of Technology, Sweden On the Effects of Two-Sided Roughness in Rolling-Sliding EHL Contacts
12:30 – 14:00 Break – Exhibition
27
29 Jan 2020 Wednesday
Morning C-5
Session:
Wear Mechanisms
Chair:
N. Espallargas Norwegian Univeristy of Science and Technology NTNU, Norway
11:00 – 11:30 Fernando López, Beatriz Fernandez-Diaz, Francesco Pagano, Ainara López, Bihotz Pinedo, Raquel Bayón IK4-TEKNIKER, Spain White Etching Crack in Wind Turbine Bearings: Main Drivers and Experimental Procedures
11:30 – 12:00 Monika Ratoi, Brian Mellor University of Southampton, United Kingdom Dr. Vlad Niste, Hiroyoshi Tanaka, Joichi Sugimura Kyushu University, Japan Lubricants for Prevention of Hydrogen Absorption in Steel
12:00 – 12:30 Jörg W.H. Franke, Jörg Loss, Wolfram Kruhöffer, Daniel Merk Schaeffler Technologies AG & Co. KG, Germany Influence of Oil Formulation on White Etching Crack Formation Depending on WEC Main Mechanism
12:30 – 14:00 Break – Exhibition
28
29 Jan 2020 Wednesday
Morning C-6
Session:
Rolling Element Bearings (1)
Chair:
G. Morales-Espejel SKF Research and Technology Development, The Netherlands LaMCoS INSA de Lyon, France
11:00 – 11:30 Tobias Hultqvist, Aleks Vrcek, Pär Marklund, Roland Larsson Luleå University of Technology, Sweden Tomas Johannesson Volvo Cars Corporation, Sweden Analysis of Split Crankshaft Roller Bearings with Focus on Lubrication and Contact Stresses
11:30 – 12:00 David Gonçalves INEGI, Portugal Jorge Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal Armando V. Campos Instituto superior de engenharia do politécnico do Porto, Portugal Lubrication Regime and Friction in Rolling Contacts
12:00 – 12:30 Rahul Dahiwal, Bernd Sauer Technische Universität Kaiserslautern, Germany Lifetime Influence of Cage Wear during Transfer Lubrication of Solid-Lubricated Roller Bearings
12:30 – 14:00 Break – Exhibition
29
29 Jan 2020 Wednesday
Morning C-7
Session:
Sustainable Lubricants (1)
Chair:
M. Matzke Robert Bosch GmbH, Germany
11:00 – 11:30 Markus Matzke Robert Bosch GmbH, Germany Global Need for Sustainability – How Advanced Lubrication Can Contribute to a More Sustainable Future
11:30 – 12:00 Apu Gosalia UEIL, Belgium Sustainability Task Force European Lubricants Industry
12:00 – 12:30 Ivana Krkljus BASF SE, Germany Fact Based Sustainability for Lubricants: How to Assess the Portfolio and Products’ Environmental Impacts Based on a Case Study of Hydraulic Fluids
12:30 – 14:00 Break – Exhibition
30
29 Jan 2020 Wednesday
Morning C-8
Session:
Surface & Coatings (1)
Chair:
Z. Khan Bournemouth University, UK
11:00 – 11:30 Volker Weihnacht, Frank Kaulfuss, Falko Hofmann, Patrick Bergmann Fraunhofer IWS, Germany Superhard Carbon Coatings for Application in Low-Friction Gears
11:30 – 12:00 Javier Echávarri Otero, Enrique Chacón Tanarro, Guillermo Sanz Pascual, Íñigo Herrero de Zavala Technical University of Madrid, Spain Armando Salmerón Cano, Tomás Pérez Gutiérrez, Luis Fernández Ruiz-Morón, Beatriz Domínguez Jimeno Repsol Technology Lab, Spain Friction Behavior in Hydraulic Shock-Absorbers: the Influence of Diverse Fluids and DLC Coatings
12:30 – 14:00 Break – Exhibition
31
29 Jan 2020 Wednesday
Morning C-9
Session:
i-Tribomat
Chair:
I. Toth AC2T research GmbH, Austria
11:00 – 11:30 Franz Pirker, András Vernes, Ivana Tóth, Ulrike Cihak-Bayr AC2T research GmbH, Austria i-TRIBOMAT – Single-Entry Point (SEP) concept
11:30 – 12:00 Alberto Alberdi, Raquel Bayon, Amaya Igartua TEKNIKER, Spain An Industrial Driven Service Catalogue
12:00 – 12:30 Alvaro Garcia TEKNIKER, Spain Design of a Scalable and Interoperable Platform for Tribo-Connection
12:30 – 14:00 Break – Exhibition
32
29 Jan 2020 Wednesday
Afternoon D-1
Session:
Lubricants (2)
Chair:
M. Jungk MJ Tribology, Germany
14:00 – 14:30 Phil Hutchinson Evonik Resource Efficiency GmbH, Germany Correlating Viscosity to Fuel Efficiency in the Daimler OM501 Heavy-Duty Diesel Engine Fuel Efficiency Test and the Influence of VII
14:30 – 15:00 Deepak H. Veeregowda, Angela Tortora Ducom Instruments Europe B.V., The Netherlands A System Engineering Approach to Reduce Soot Wear
15:00 – 15:30 Ritwik Chakraborty, Syamal Kanti Chakrabarti Indian Jute Industries' Research Association, India Low Viscosity Friction Modifying Formulation for Jute Fibre Spinning
15:30 – 16:00 Break – Exhibition
33
29 Jan 2020 Wednesday
Afternoon D-2
Session:
Engine Tribology (2)
Chair:
E. Tomanik University of Sao Paulo, Brazil
14:00 – 14:30 Hyunjung Oh, Kyoungdoug Min,Kyoung-Pyo Ha Seoul National University, South Korea Development of New Piston Friction Measurement System
14:30 – 15:00 Malcolm Fox, Martin Priest University of Bradford, United Kingdom In-Bore Engine Component Tribology
15:00 – 15:30 Boris Zhmud Applied Nano Surfaces Sweden AB, Sweden Eduardo Tomanik University of Sao Paulo, Brazil Optimizing the Piston/Bore Tribology:The Role of Surface Specifications, Ring Pack and Lubricant
15:30 – 16:00 Break – Exhibition
34
29 Jan 2020 Wednesday
Afternoon D-3
Session:
Additives (4)
Chair:
S. Lucazeau NYCO, France
14:00 – 14:30 Matthias Fies BASF SE, Germany Non-Antagonistic Corrosion Inhibitors for Lubricant Applications
14:30 – 15:00 Jennifer Honselmann, Jonas Wagner, Philipp Daum Fraunhofer IWM MikroTribologie Centrum µTC, Germany Martin Dienwiebel KIT-IAM MikroTribologie Centrum µTC,, Germany Thomas Rühle BASF SE, Germany Vacuum Tribology with Gas Phase Deposited Lubricant Additives
15:00 – 15:30 Ullrich Gunst Analytical Tribology Network, Germany Characterization of Lubricating Oils and Greases with Different ToF-SIMS Methods
15:30 – 16:00 Break – Exhibition
35
29 Jan 2020 Wednesday
Afternoon D-4
Session:
Lubrication Fundamentals (2)
Chair:
J. Müllers Robert Bosch GmbH, Renningen, Germany
14:00 – 14:30 Fabrice Dassenoy, Istvan Zoltan Jenei Ecole Centrale de Lyon, France Arash Khajeh, Ashlie Martini University of California Merced, Merced, CA, USA Thierry Epicier MATEIS, INSA Lyon, France Dairene Uy, Hamed Ghaednia, Arup Gangopadhyay Ford Motor Company, Dearborn, MI, USA Mechanical Characterization of Diesel Soot Nanoparticles: In Situ Compression in the Transmission Electron Microscope and Simulations
14:30 – 15:00 Shreyas Jalikop AC2T research GmbH, Austria Prof. Bernhard Scheichl, Carsten Gachot Technische Universität Wien, Austria Fundamentals of Directional Spreading of Lubricants over Multi-Scale Textured Surfaces
15:00 – 15:30 Rui Li, Xianghui Meng Shanghai Jiao Tong University, China Analysis of the Critical Friction Pairs in Marine Diesel Engines Based on a Tribo-Dynamic Model
15:30 – 16:00 Break – Exhibition
36
29 Jan 2020 Wednesday
Afternoon D-5
Session:
Wear of Materials
Chair:
M. Dienwiebel Karlsruhe Institute of Technology, Germany
14:00 – 14:30 Igor Velkavrh, Florian Ausserer, Stefan Klien, Joël Voyer, V-Research GmbH, Austria Harald Rojacz, Ewald Badisch AC2T research GmbH, Austria Klaus Lingenöl Lingenhöle Technologie GmbH, Austria Residual Stresses in Nitrocarburised Layers Applied for Tribological Applications
14:30 – 15:00 Krunal Mehta, Vishvesh Badheka Pandit Deendayal Petroleum University, India Evolution of Wear Behavior of Al6061-B4C Surface Composites with Normal Load and Sliding Speed
15:00 – 15:30 Daniel Kümmel, Erik Segebade, Volker Schulze, Johannes Schneider KIT Karlsruhe Institute of Technology, Germany Tribological Behavior of Ti6Al4V Surface Textured by Cutting Tools
15:30 – 16:00 Break – Exhibition
37
29 Jan 2020 Wednesday
Afternoon D-6
Session:
Rolling Element Bearings (2)
Chair:
G. Poll Leibniz Universität Hannover, Germany
14:00 – 14:30 Petra Wiersch, Alexander Furtmann Flender GmbH, Germany A Contribution to the Discussion Regarding the Influence of Very Low Currents on Bearing Life
14:30 – 15:00 Marius Wolf, Arshia Fatemi Robert Bosch GmbH, Germany Nadine Nagler Bosch Rexroth AG, Germany Simulation of Slip in Roller Element Bearing with Lubricant Rheological Models
15:00 – 15:30 Pedro Marques INEGI, Portugal Prof. Jorge Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal Jorge Castro ISEP - Instituto Superior de Engenharia do Porto, Portugal An Improved Setup for Measurement of Rolling Bearing Torque Loss in a Modified Four-Ball Machine
15:30 – 16:00 Break – Exhibition
38
29 Jan 2020 Wednesday
Afternoon D-7
Session:
Sustainable Lubricants (2)
Chair:
M. Matzke Robert Bosch GmbH, Germany
14:00 – 14:30 John Eastwood, Gareth Moody, David Gillespie Croda, USA Investigating Tribofilm Chemistry of Engines Oils Formulated with Organic Polymeric Friction Modifiers and Inorganic Friction Modifiers
14:30 – 15:00 Thilo Krapfl, Ernst Bielmeier Evonik Resource Efficiency GmbH, Germany Denis Sepoetro Evonik Technology & Infrastructure GmbH, Germany Christina Merz Evonik Industries AG, Germany Life Cycle Assessment of an Efficient Hydraulic Fluid
15:00 – 15:30 Sebastian Dörr Lubtrading GmbH, Germany Sustainability – Between Responsibility, Marketing and Green Wash
15:30 – 16:00 Break – Exhibition
39
29 Jan 2020 Wednesday
Afternoon D-8
Session:
Surface & Coatings (2)
Chair:
V. Weihnacht Fraunhofer IWS, Germany
14:00 – 14:30 Zulfiqar Khan Bournemouth University, Graet Britain Development of Novel Nano-Composite Coatings for Tribological Applications
14:30 – 15:00 Andreas Keller HS Mannheim, Germany Marco Enger GGB Heilbronn GmbH, Germany Stanislav Trubnykov, Jürgen Molter Hochschule Mannheim, Germany Transfer Film Quality - An Underestimated Factor Concerning Plain Bearing Performance
15:00 – 15:30 Go Tatsumi, Monika Ratoi, Brian Mellor University of Southampton, United Kingdom Yuji Shitara, Kiyomi Sakamoto JXTG Nippon Oil & Energy Corporation, Japan Effect of Friction Modifiers on the Lubrication of Polymeric Materials with Steel Counter Parts
15:30 – 16:00 Break – Exhibition
40
29 Jan 2020 Wednesday
Afternoon D-9
Session:
i-Tribomat
Chair:
F. Pagano TEKNIKER, Spain
14:00 – 14:30 Maria Kogia ANSYS GRANTA, United Kingdom Materials Information Management for Tribology
14:30 – 15:00 Helena Ronkainen, Sami Majaniemi VTT Technical Research Centre of Finland, Finland Collaboration Interface
15:00 – 15:30 Ichiro Minami Luleå University of Technology, Sweden Validation of Lab-to-Field Up-Scaling Protocol
15:30 – 16:00 Break – Exhibition
41
29 Jan 2020 Wednesday
Afternoon E-1
Session:
Bio Lubricants (1)
Chair:
R. Luther Fuchs Schmierstoffe GmbH, Germany
16:00 – 16:30 Marcella Frauscher AC2T research GmbH, Austria Correlation of Lubricant Degradation & Performance of a Biodegradable Hydraulic Fluid
16:30 – 17:00 Frederik Kort Putzmeister Engineering GmbH, Germany Lifelong Environmentally Acceptable Oil Filling + Condition Monitoring – A Practical Approach
17:15 Departure for Conference Dinner
18:00 Conference Dinner
42
29 Jan 2020 Wednesday
Afternoon E-2
Session:
Automotive Components (1)
Chair:
P. Marklund Luleå University of Technology, Sweden
16:00 – 16:30 Polychronis Dellis ASPETE, Greece Temperature Effect in Friction Force Measurements for a Simplified Piston-Cylinder Setup
16:30 – 17:00 Mitulkumar Solanki, Dipak Vakharia Sardar Vallabhbhai National Institute of Technology, India Experimental Investigation between a Layered Cylindrical Hollow Roller and Flat Plate
17:15 Departure for Conference Dinner
18:00 Conference Dinner
43
29 Jan 2020 Wednesday
Afternoon E-3
Session:
Additives (5)
Chair:
A. Stratmann RWTH Aachen University
16:00 – 16:30 Michael Heeran, Johanna C. Speelman Nouryon, The Netherlands Philip W. Dyer Durham University, United Kingdom Understanding ZDDP-OFM Additive Interactions and their Impact on Performance
16:30 – 17:00 Vlad Bogdan Niste, Hiroyoshi Tanaka, Joichi Sugimura Kyushu University, Japan NaNO2 as Lubricant Additives against Hydrogen Permeation in Rolling Contacts
17:15 Departure for Conference Dinner
18:00 Conference Dinner
44
29 Jan 2020 Wednesday
Afternoon E-4
Session:
Grease Condition Monitoring
Chair:
Paolo Falzoni Kinolt GmbH, Germany
16:00 – 16:30 Richard Wurzbach MRG Labs, USA Small Volume Sampling and Analysis for New and In-Service Greases
16:30 – 17:00 Simon Eiden, Klaus Lucka TEC4FUELS GmbH, Germany Investigations of Grease Thickener Degradation
17:15 Departure for Conference Dinner
18:00 Conference Dinner
45
29 Jan 2020 Wednesday
Afternoon E-5
Session:
Applications
Chair: A. Pauschitz AC2T research GmbH, Austria
16:00 – 16:30 Rainer Franz, Astrid Lebel, Josef Prost AC2T research GmbH, Austria Mirjam Bäse Magna Powertrain GmbH & Co KG, Austria Chemical Indications of Water Induced Failure Modes in Wet Clutches of Automotives
16:30 – 17:00 Patrick Stuhler, Nadine Nagler Bosch Rexroth AG, Germany Smearing in Full Complement Cylindrical Roller Bearings
17:15 Departure for Conference Dinner
18:00 Conference Dinner
46
29 Jan 2020 Wednesday
Afternoon E-6
Session:
Rolling Element Bearings (3)
Chair:
G. Jacobs RWTH Aachen University, Germany
16:00 – 16:30 Michiel van Breemen, Glen May Quaker Chemical, The Netherlands Reducing the Risk for Glossy Wear Marks to Occur on Roller-Bearing Linear Guides
16:30 – 17:00 Daniel Strömbergsson, Pär Marklund, Kim Berglund Luleå University of Technology, Sweden Dynamic Simulation of Rolling Element Bearing Vibrations Using SKF BEAST and Test Rig Validation
17:15 Departure for Conference Dinner
18:00 Conference Dinner
47
29 Jan 2020 Wednesday
Afternoon E-7
Session:
Sustainable Lubricants (3)
Chair:
M. Matzke Robert Bosch GmbH
16:00 – 16:30 Daniela Posselt, Michael Adler AC2T research GmbH, Austria Erwin Haberda, Wolfgang Voiticek Leobersdorfer Maschinenfabrik GmbH, ,Austria Specification Procedure for Lubricants Applied in Oil and Gas Exploration Compressors
16:30 – 17:00 John Burbank, Jürgen Rausch, Rolf Luther, Gunther Kraft Fuchs Schmierstoffe GmbH, Germany New Approaches to Extreme Low-Friction Lubrication
17:15 Departure for Conference Dinner
18:00 Conference Dinner
48
29 Jan 2020 Wednesday
Afternoon E-8
Session:
Surface & Coatings (3)
Chair:
V. Weihnacht Fraunhofer IWS, Dresden, Germany
16:00 – 16:30 Linus Everlid, Johan Blomkvist, Boris Zhmud Applied Nano Surfaces Sweden AB, Sweden The Properties of Solid Lubricant Films Generated by Reactive Quenching
16:30 – 17:00 Maryam Bahrami, Jürgen Rühe University of Freiburg, Germany Vincent Le Houérou Institut Charles Sadron ,Strasbourg, France Studies on the Lubrication of Surface-attached Hydrogels
17:15 Departure for Conference Dinner
18:00 Conference Dinner
49
29 Jan 2020 Wednesday
Afternoon E-9
Session:
i-Tribomat
Chair:
E. Nyberg Luleå University of Technology, Sweden
16:00 – 16:30 Amaya Igartua, Alberto Alberdi, Itziar Alonso Fundación TEKNIKER, Spain Franz Pirker AC2T research GmbH, Austria Building I-Tribomat Interconnections with Materials Ecosystem
16:30 – 17:00 Ivana Tóth AC2T research GmbH, Austria Panel Discussion (i-TRIBOMAT Communication)
17:15 Departure for Conference Dinner
18:00 Conference Dinner
50
30 Jan 2020 Thursday
Morning P-3
Session:
Plenary Session (3)
Chair:
M. Jungk MJ Tribology, Germany
09:00 – 09:30 Martin Dienwiebel Karlsruhe Institute of Technoglogy (KIT), Germany In-situ Studies on the Competitive Adsorption of Lubricant Additives
09:30 – 10:00 Nuria Espallargas Norwegian University of Science and Technology NTNU, Norway Water Lubrication – Challenges and Opportunities
10:00 – 10:30 Stefan Eder, Manel Rodríguez Ripoll, Ulrike Cihak-Bayr AC2T research GmbH, Austria Daniele Dini Imperial College London, UK Carsten Gachot Vienna University of Technology, Austria MD Simulations of FCC Alloys under Dry Sliding Yield a Mechanism Map for Near-Surface Microstructural Development
10:30 – 11:00 Break – Exhibition
51
30 Jan 2020 Thursday
Morning F-1
Session:
Bio-Lubricants (2)
Chair:
R. Luther Fuchs Schmierstoffe GmbH, Germany
11:00 – 11:30 Martin Kingsley Argent Energy, United Kingdom The Use of Alternative Sources of Feedstocks as Renewable and Biodegradable Lubricants
11:30 – 12:00 Peter Lohmann, G. Gaule Hermann Bantleon GmbH, Germany A Look Behind the Scenes of Biological Degradation of Lubricants
12:00 – 12:30 Patrick Galda Panolin Production AG, Switzerland Quo vadis – Bio-Lubricants? An Update about the Latest Activities of CEN TC19 WG33
12:30 – 14:00 Break – Exhibition
52
30 Jan 2020 Thursday
Morning F-2
Session:
Automotive Components (2)
Chair:
R. Larsson Luleå University of Technology, Sweden
11:00 – 11:30 Pär Marklund, David Sandlund, Oscar Wintercorn, Kim Berglund Luleå University of Technology, Sweden Influence of Wet Clutch Running-In on Friction, Pressure Distribution and Permeability
11:30 – 12:00 Pedro Marques INEGI. Portugal Justino Cruz, Jorge Seabra Ramiro Martins ISEP - Instituto Superior de Engenharia do Porto, Portugal No-Load Losses in a Car Differential
12:30 – 14:00 Break – Exhibition
53
30 Jan 2020 Thursday
Morning F-3
Session:
Lubricant Condition Monitoring
Chair:
C. Gachot Vienna University of Technology, Austria
11:00 – 11:30 Norman Rohrwick OilDoc GmbH, Germany CM of Oil and Equipment Status by the Use of Online Oil Sensors and Multivariate Data Analysis
11:30 – 12:00 Haris Trobradovic SDT International, Belgium Ultrasound Guided Condition Based Lubrication
12:00 – 12:30 Pawel Rycerz, Markus Hartinger, Amir Kadiric Imperial College London, United Kingdom Early Detection of Fatigue Damage in Rolling-Sliding Contacts
12:30 – 14:00 Break – Exhibition
54
30 Jan 2020 Thursday
Morning F-4
Session:
E-Mobility (1)
Chair:
S. Meinhardt ExxonMobil Chemical Central Europe GmbH, Germany
11:00 – 11:30 Ling Wang University of Southampton, United Kingdom A Study of Rolling Element Bearings under the Influence of Electrical Environment
11:30 – 12:00 Steffen Bots Lubevisio GmbH, Germany Manfred Jungk MJ Tribology, Germany Silicone Fluids with Optimized Tribological Behaviour through Molecule Structure Enhancement - A Solution for EV Drivetrains
12:00 – 12:30 Amir Kadiric, Athanasios Christoduolias Imperial College London, United Kingdom A Model for Prediction of Gearbox Power Losses under Conditions Pertinent to EV Operation
12:30 – 14:00 Break – Exhibition
55
30 Jan 2020 Thursday
Morning F-5
Session:
Simulation (1)
Chair: C. Pastor Robert Bosch GmbH, Germany
11:00 – 11:30 Marko Tosic, Roland Larsson, Marcus Björling Luleå University of Technology, Sweden Thomas Lohner, Karsten Stahl Technical University of Munich, Germany Janko Jovanovic University of Montenegro CFD Analysis of EHL Films at High Loads
11:30 – 12:00 Arn Joerger, Albert Albers Karlsruhe Institute of Technoglogy (KIT), Germany A Numerical Approach for the Determination of Archard’s Wear Coefficient
12:30 – 14:00 Break – Exhibition
56
30 Jan 2020 Thursday
Morning F-6
Session:
Tribochemistry
Chair: Nuria Espallargas Norwegian University of Science and Technology NTNU, Norway
11:00 – 11:30 Tadashi Oshio, Clotilde Minfray, Jules Galipaud, Thierry Le Mogne, Fabrice Dassenoy Ecole Centrale of Lyon, France Kazuhiro Yagishita JXTG Nippon Oil & Energy Corporation, Japan Tribochemical Properties of Dialkyl Phosphonoacetic Acid in Synthetic Ester Base Fluid
11:30 – 12:00 Andreas Willecke Fuchs Schmierstoffe GmbH, Germany Atomistic Simulation of Sulfurized Additives in Lubricants
12:30 – 14:00 Break – Exhibition
57
30 Jan 2020 Thursday
Morning F-7
Session:
Wear Testing
Chair:
S. Beyer-Faiss Dr. Tillwich GmbH, Werner Stehr, Germany
11:00 – 11:30 Thomas Klotz IPEK Institute of Product Engineering, Germany Investigation of the Heat Distribution of a Dry Friction Brake During Fade and Recovery Using Fiber Optic Sensing and Infrared Technology
11:30 – 12:00 Henrik Buse Slovak University of Technology and UAS Mannheim, Slovak Republic Erika Hodúlová Slovak University of Technology in Bratislava, Slovac Republic Fretting Wear Observation in Plane Metal to Metal Contacts
12:00 – 12:30 Kosta Simonovic, Tomas Vitu, Martin Danek, Tomas Polcar Czech Technical University in Prague, Czech Republic Newly Developed Device for the Investigation of the Running-In Behaviour
12:30 – 14:00 Break – Exhibition
58
30 Jan 2020 Thursday
Morning F-8
Session:
Unconventional Lubricants (1)
Chair:
F. Gatti Fraunhofer Institute for Mechanics of Materials IWM, Germany
11:00 – 11:30 Maria-Dolores Aviles, Maria-Dolores Bermudez, Francisco-Jose Carrion, Ramon Pamies, Jose Sanes, Ana-Eva Jimenez Universidad Politecnica de Cartagena, Spain Tribological Study of New Ionic Liquid Dispersions and Blends
11:30 – 12:00 Sergei Glavatskih KTH Royal Institute of Technology, Sweden Rene Westbroek, Johan Leckner Axel Christiernsson International AB, Sweden Lubrication of Spiral Bevel Gears: Influence of the Grease Thickener
12:00 – 12:30 Michael Gleß Technische Akademie Esslingen e.V., Germany Tribological Investigation of Shelf-Sharpening and Innovative Lubrication Solutions
12:30 – 14:00 Break – Exhibition
59
30 Jan 2020 Thursday
Morning F-9
Session:
Metal Working Fluids (1)
Chair:
F. Passman Biodeterioration Control Associates, Inc., USA
11:00 – 11:30 Harish Potnis ANGUS CHEMICAL COMPANY, India Optimizing the Sustainability, Performance and Cost of your MWF
11:30 – 12:00 Thomas Koch City University of Bremen, Germany Algae-Based Bio Lubricant Additives: Extraction, Application and Tech. Properties – from the Algae to the Technical Product
12:00 – 12:30 Frederick J. Passman Biodeterioration Control Associates, Inc., USA Peter Küenzi Blaser Swisslube, Switzerland Jordan Schmidt LuminUltra Technologies, Ltd., Canada Adenylate Energy Charge – New Tool for Determining MWF Microbial Population’s Condition
12:30 – 14:00 Break – Exhibition
60
30 Jan 2020 Thursday
Afternoon G-1
Session:
Bio Lubricants (3)
Chair:
R. Luther Fuchs Schmierstoffe GmbH, Germany
14:00 – 14:30 Yiyuan Tian, Sergei Glavatskih KTH Royal Institute of Technology, Sweden Thomas Norrby Naphthenics TechDMS, Sweden Additive Expression and Tribology of Novel Hybrid Base Fluids
14:30 – 15:00 Wilhelm Huber Peter Greven GmbH & Co. KG, Germany Estolides – a New Category of High-Performance Esters
15:00 – 15:30 Mark Miller Biosynthetic Technologies, USA Innovations and Regulations for Biobased and Sustainable Lubricants
15:30 – 16:00 Basudeb Saha University of Delaware, USA Sustainable Lubricants from Biomass
16:00 – 16:15 Short Break
61
30 Jan 2020 Thursday
Afternoon G-2
Session:
Materials Characterisation
Chair:
M. Dienwiebel Karlsruhe Institute of Technology, Germany
14:00 – 14:30 Christian Greiner, Julia Lehmann, Reinhard Schneider Karlsruhe Institute of Technology, Germany Sliding Velocity and Exposure Time Affect Tribologically-Induced Oxidation in Copper
14:30 – 15:00 Jian Song, Haomiao Yuan Ostwestfalen-Lippe University of Applied Sciences and Arts, Germany Effect of Lubrication and Thermal Aging on the Fretting Behavior of Electrical Contacts
15:00 – 15:30 Tarek Lutz University of Tübingen, Germany Nano- and Micro Analytical Approach for Understanding the Early State of Bearing Failure
16:00 – 16:15 Short Break
62
30 Jan 2020 Thursday
Afternoon G-3
Session:
Artificial Intelligence in Tribology
Chair:
A. Vogt Robert Bosch GmbH, Germany
14:00 – 14:30 Ulrike Cihak-Bayr, Reinhard Grundtner, Franz Pirker AC2T research GmbH, Austria Harald Steiner, Thomas Glatzl Danube University Krems, Austria Machine Learning Algorithms for Health Monitoring of Sliding Bearings
14:30 – 15:00 Florian König, Georg Jacobs, Achraf Ouald Chaib, Christopher Sous RWTH Aachen University, Germany Machine Learning Based Anomaly Detection for Wear Lifetime Prediction of Journal Bearing Systems
15:00 – 15:30 Barbara Monse Bureau Veritas Commodities, Germany Artificial Intelligence Transforms Oil Analysis
16:00 – 16:15 Short Break
63
30 Jan 2020 Thursday
Afternoon G-4
Session:
E-Mobility (2)
Chair:
S. Bots LUBEVISIO GmbH, Germany
14:00 – 14:30 Sven Meinhardt ExxonMobil Chemical Central Europe GmbH, Germany Synthetic Base Oil Solutions for EV Driveline Fluids Applications
14:30 – 15:00 Keiichi Narita Idemitsu Kosan Co.,Ltd., Japan Study of Motor Cooling Performance of Lubricants with Application to Transaxles in HEVs and Evs
15:00 – 15:30 Sirui Chen, Katharina Bause, Albert Albers KIT / IPEK - Institute of Product Engineering, Germany Dr. -Ing. Knut Erdmann Schaeffler Technologies AG Tribological Performance Descriptions of Friction System in Synchronization for E-Powertrain
15:30 – 16:00 Leonardo Israel Farfan Cabrera Escuela de Ingeniería y Ciencias, Tecnologico de Monterrey, Mexico Tribology of Electric Vehicles – Future Improvement Trends for Critical Components
16:00 – 16:15 Short Break
64
30 Jan 2020 Thursday
Afternoon G-5
Session:
Simulation (2) – Soft Contacts
Chair:
C. Pastor Robert Bosch GmbH, Germany
14:00 – 14:30 Andreas Ziegltrum, Enzo Maier, Thomas Lohner, Karsten Stahl Gear Research Centre (FZG), Germany A Study on Thermal Elastohydrodynamic Lubrication of Coated Polymers
14:30 – 15:00 Fabian Kaiser, Andreas Gropp, Ravindrakumar Bactavatchalou, Axel Rieder Freudenberg Technology Innovation SE & Co. KG, Germany Simulation of Rubber Friction: Comparison to Pin-On-Disc Measurement Results
15:00 – 15:30 Michele Scaraggi Università del Salento, Italy Surface Rough-ness Anisotropy in Soft Contacts: From Microbot Locomotion to Seals Applications
15:30 – 16:00 Alexander Elter Robert Bosch GmbH, Germany Elastohydrodynamic Simulation of Rein-forced Plastic Materials in Conformal Contacts
16:00 – 16:15 Short Break
65
30 Jan 2020 Thursday
Afternoon G-6
Session:
Lubrication Fundamentals
Chair:
J. Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal
14:00 – 14:30 Volker Diegelmann VDEh-Betriebsforschungsinstitut GmbH, Germany Jens Ostrowski Bechem GmbH, Germany Andreas Johnsson Swerim AB, Sweden Martin Raulf ThyssenKrupp Steel Europe AG, Germany Toralf Saffer ArcelorMittal Eisenhüttenstadt GmbH, Germany Patrick Charbonnier Luxcontrol SA, Luxembourg Application of Single-Phase Oil-Free Lubricants in Cold and Hot Rolling of Flat Material
14:30 – 15:00 Carlos Fernandes INEGI, Portugal Jorge Seabra,FEUP, Portugal Luis Magalhães, João Pais ISEP, Portugal Influence of Run-In Load and Temperature on Gear Efficiency and Micropitting
15:00 – 15:30 Mustafa Yilmaz, Ali Önüt, Thomas Lohner, Karsten Stahl Technical University of Munich, Germany On-Demand Gearbox Lubrication: an Efficiency Study from Dip to Minimum Quantity Lubrication
15:30 – 16:00 Alberto Porras-Vazquez, David Philippon, Philippe Vergne, Nicolas Fillot, ,Lionel Lafarge INSA de Lyon, France Guillermo E. Morales-Espejel SKF Engineering and Research Centre Nieuwegein, The Netherlands LaMCoS INSA de Lyon, France A Dual Numerical-Experimental Approach for the Study of Oil Starvation in Point Contacts
16:00 – 16:15 Short Break
66
30 Jan 2020 Thursday
Afternoon G-7
Session:
Test Methods
Chair:
M. Grebe Mannheim University of Applied sciences, Germany
14:00 – 14:30 Susanne Beyer-Faiss Dr. Tillwich GmbH Werner Stehr, Germany Modified Accelerated Ageing Test Method for Life Time Evaluation of Lubricants and Additives
14:30 – 15:00 Thomas Witt Dr. Tillwich GmbH Werner Stehr, Germany Determination of Flow Point of Soft Lubricating Greases Using the Test Method of Inclining Rod
15:00 – 15:30 Markus Matzke, Jörg Schöfer Robert Bosch GmbH, Germany Gerd Dornhöfer BMS, Germany Study of Thermooxidative Ageing and Proposal of a Test Method Standard
16:00 – 16:15 Short Break
67
30 Jan 2020 Thursday
Afternoon G-8
Session:
Unconventional Lubricants (2)
Chair:
S. Glavatskih KTH Royal Institute of Technology, Sweden
14:00 – 14:30 Felix Gatti, Tobias Amann Fraunhofer Institute for Mechanics of Materials IWM, Germany Jürgen Rühe Department of Microsystems Engineering - IMTEK, Germany Programmable Friction
14:30 – 15:00 Marcella Frauscher, Lucia Pisarova, Thomas Lebersorger, Nicole Dörr AC2T research GmbH, Austria Multi-Stage Assessment of Space Lubricants
15:00 – 15:30 Erik Nyberg, Ichiro Minami Luleå University of Technology, Sweden Silicate-forming Ionic Liquid Triboimprovers for Multiply Alkylated Cyclopentanes
15:30 – 16:00 Roman Nevshupa IETCC-CSIC, Spain In Operando Study of Tribochemical Processes through Analysis of Triboemission of Gases
16:00 – 16:15 Short Break
68
30 Jan 2020 Thursday
Afternoon G-9
Session:
Metal Working Fluids (2)
Chair:
F. Passman Biodeterioration Control Associates, Inc., USA
14:00 – 14:30 Theresa Jähnig, Mikhael El-Khoury, Technische Universität Dresden, Germany Andrés F. Lasagni Fraunhofer - Institute for Material and Beam Technology (IWS), Germany Lubricant-Free Metal Forming – Friction Reduction by Laser Structuring Ta-C Coated Forming Tools
14:30 – 15:00 Mayank Kumar Atlas Copco Industrial Technique AB, Sweden Erik Persson PhD Atlas Copco Industrial Technique AB, Sweden Sergei Glavatskih KTH Royal Institute of Technology, Sweden Does a Cutting Fluid Influence the Reliability of a Threaded Fastener Joint?
15:00 – 15:30 Peter Küenzi Blaser Swisslube AG, Switzerland Nicola Di Maiuta Microstech AG, Switzerland A Closer Look at Microbiology in Metalworking Fluids
15:30 – 16:00 Nicole Clarkson, Harish Potnis, Clayton Cooper ANGUS CHEMICAL COMPANY, USA Aluminium Staining: Achieving Performance through Amine Selection
16:00 – 16:15 Short Break
69
30 Jan 2020 Thursday
Afternoon P-4
Session:
Concluding Plenary Session
Chair:
M. Gleß Technische Akademie Esslingen, Germany
16:15 – 16:45 Guillermo E. Morales-Espejel SKF Research and Technology Development, The Netherlands LaMCoS INSA de Lyon, France Tribology Modelling of Lubricated Contacts for Electrification
16:45 – 17:00 Mirjam Bäse Magna Powertrain GmbH & Co KG, Austria Florian Rummel Anton Paar Germany GmbH, Germany Hitoshi Washizu University of Hyogo, Hyogo, Japan Vlad Bogdan Niste Kyushu University, Kyushu, Japan Stephan Henzler Carl Bechem AG, Hagen, Germany Rebekka Drafz Fuchs Schmierstoffe GmbH, Mannheim, Germany GfT Young Tribologists: How Tribology Grows Further and Further
17:00 Farewell Party