10x8 hen house for 30 hens - howtoplans.org · 10x8 hen house for 30 hens author: howtoplans.org...

10'x8' Hen House Plan

Designed for up to 30 chickens

.orgHowtoPlans

Steps count 13 24

Illustrations for Each Step

Print Ready

Step By Step Instructions

Full Materials and Cuttings List

Additional Illustrations

Additional Blueprints

Tools List

Fastening Elements List

Technical Support

Compare our Free vs. Premium Chicken Coop Plan

Features This free plan Premium edition

This perfectly designed plan will guide you through the entire process of building your very own coop for any backyard or garden.

Check out the benefits you would get with our premium edition:

https://www.howtoplans.org/hilton-10x8-hen-house-plan/?attribute_pa_plan=premium&variation_id=4416&add-to-cart=3970

DisclaimerThe information provided here will show you how to build a chicken coop. However, we at howtoplans.org do not claim that the recommended techniques are the only way to accomplish this task. It will be the responsibility of each customer to ensure the application of the correct construction methods and the use of the proper materials.In addition to the selection of the materials, the customer will be responsible for such construction issues as caulking, flashing, gluing, insulating and nailing, for ensuring adequate workmanship in the areas of installation, roofing and weatherproofing, and for any other items that are beyond the control of the designer. The materials mentioned in the plans do not represent an endorsement or recommendation of any particular product.

The Responsibility of UsersDespite our commitment to presenting accurate information, howtoplans.org is not liable for any errors or omissions appearing in the plans. Furthermore, howtoplans.org will not be liable for any consequential, special, incidental or indirect damages resulting from the use of this information. Our freedom from liability also extends to such issues as the loss of anticipated profits or business opportunities, and economic losses stemming from the use of howtoplans.org, regardless of whether there has been notification of such damage.

LiabilityThose who utilize the methods described on howtoplans.org will be responsible for their own actions. We are not liable for any injuries or property damage that may arise from the use of the information appearing on this website. If you decide to use these plans, you should employ only quality materials and should always adhere to good safety practices. In the event that you are unable to complete the project on your own, you should contact a certified contractor to ensure that construction is completed with the highest standards.

PermissionsIt is important to understand that planning and permission issues are dependent upon local requirements. Users of these plans are responsible for complying with the appropriate statutes and regulations, and for the proper implementation of the plans or other construction information provided by howtoplans.org. The city or county office in your area should be able to provide you with the relevant information.

Copyright The text and illustrations that appear here are the exclusive property of howtoplans.org and are protected by federal copyright laws. The one-time use of the plans is limited to anyone who purchases them. The duplication, publication, sale or distribution of any portion of these plans without prior written consent from the original designer will be subject to the appropriate penalties for copyright infringement.

10'x8' Hen House Material List

Floor Framing

• Pressure-Treated Lumber

• Plywood

Walls Framing


• Plywood

Nest Box (2x)


• Plywood

• Corrugated roof panel

• Wood siding boards

Window (2x)


• Wire mesh

• Window beading

• Glass

Coop's Roof


• Plywood

• Corrugated roof panel

• Metal roof ridge cap

Walls Exterior siding



Coops Door



Fasteners & Hardware

• Corner braces

• Door hinges

• Door pulls

• Surface bolts

• Galvanized nails

• Sheet metal screw with neoprene washer

• Wood screws

• Window locks

• Wood square louver gable vent

Roost, Nest box


• Plywood

1'

10'-1 1/2"

9'-9 1/2"

8"

6'-8 1/2"

1'8"

7'- 1/2" 109'-9 '"1 -1//212"

1'

1'

Foundation Preparation1.1 Clear and align the ground according to the dimensions in the drawing.

1.2 For the foundation, dig the trenches at least 1' wide and 1' deep.

1.3 Fill the trenches to ground level with concrete and let cure, or harden. Since curing times vary between brands, read the packaging for recommended curing times.

1.4 Once the concrete has cured, use standard-sized bricks and lay them across the foundation. You will need roughly 50 bricks for this step.

STEP 1

10'

7 1/4

"

1 1/2"

7'-9"

7 1/4"

1 1/2"

1'-1 1/4"

8'

Framing The Floor2.1 Assemble the frame using 1 1/2” x 7 1/4” pressure-treated material. You will need two boards cut to 10’ that will be the rim joist and two boards cut to 7’-9” that will be the joists.

2.2 Using 1 1/2 “ x 7 1/4 “ pressure-treated material, cut 7 joists and install them as shown in the illustration.

2.3 Secure the beams with 3x5" wood screws. Fasten the joists to the skids with 8x3" wood screws.

2.4 Using a speed square or carpenter's square, check the corners to make sure they are 90 degrees.

STEP 2

3'-9 1/4"

2'-5 3/4"

3'-9 1/4"8'

Install Plywood For The Floor 3.1 Prepare the 9/16" plywood for the floor sheathing according to the drawing.

3.2 Secure the plywood with 2" wood screws.

STEP 3

10'

7'-9"

3 1/2"1'-9"

1'-9"

Assemble Left Side Wall Frame4.1 For this step, you will need pressure-treated materials with the following dimensions: 1 1/2 “ x 3 1/2 “, 1 1/2 “ x 5 1/2 “ and 3 1/2 “ x 3 1/2 “. Be sure to reference the illustrations below for placement of each size.

4.2 Insert 1/2" plywood between inner and outer window header.

4.3 Connect the beams with 2x4" wood screws.


STEP 4

8'10'

8'

Assemble Right Side Wall Frame5.1 For this step, you will need pressure-treated materials with the following dimensions: 1 1/2 “ x 3 1/2 “, 1 1/2 “ x 5 1/2 “ and 3 1/2 “ x 3 1/2 “.

5.2 Insert 1/2" plywood between inner and outer window header.



STEP 5

7'-5"

1'-1" 1'-1" 1'-1" 1'-1" 1'-1" 1'-1"

1 1/2

"7'-

9"1 1

/2"

Assemble Back Side Wall Frame6.1 Using 1 1/2“ x 3 1/2“ pressure-treated material, construct back wall frame using the drawing below as a reference.



STEP 6

C

C

Assemble Front Wall Frame7.1 Using 1 1/2“ x 3 1/2“ and 1 1/2“ x 5 1/2“ pressure-treated material, construct front wall frame using the drawing below as a reference.

7.2 Insert 1/2" plywood between inner and outer door header.



10 1/2" 10 1/2"

1'-4 3/4" 1'-4 3/4"

10 1/2" 10 1/2"

1 1/2

"7'-

9"1 1

/2"

9"

6'-8"

2'-1 1/2" 2'-1 1/2"

5 1/2"

7'-5"

3'-2"

STEP 7

1'-6 1/4"

10'

10'

7 1/4"

3/4"

Assemble The Roof Frame8.1 Using 1 1/2 “ x 5 1/2 “ material, cut 14 rafters according to the dimensions..

8.2 Using 1 1/2 “ x 3 1/2 “ material, cut five collar ties according to the dimensions. 8.3

Using 3/4 “ x 7 1/4 “ material, cut the ridge board according to the illustration below.


STEP 8

5'-2 3/4"3'-10 1/4"

3'-3 1/2"

3'-10 1/4"

Install Plywood For The Roof9.1 Cut sheets of 9/16” plywood for sheathing the roof using the drawing below as a guide.

9.2 Secure the plywood with 2" wood screws.

STEP 9

2'-3 1/2"

1'-9"2'- 3/4"

1'-9"2'-3 1/2"

4'-2 1

/2"

1'-10

"

Window Installation for Left and Right WallsIt is necessary to prepare 4 windows.

10.1 Using 1 1/2 “ x 2 1/2 “ pressure-treated material, cut the outer frame for the window as shown in the drawing below. Additionally, add vertical and horizontal supports using 3/4 “ x 1 1/2 “ material and cut the recesses for the window hinges.

10.2 Prepare 1/4" wire mesh for window according to the dimensions.

10.3 Use 1 1/2 “ x 1 1/2 “ pressure-treated material to make the inner frame and secure with 3”

wood screws. Mill a recess for the glass panes and for the hinges.

10.4 Prepare and install glass into inner frame groove and fasten it by window beading from four sides. Use for this 1/2" galvanized nails.

10.5 Install hinges (4") with 3x1" wood screws and assemble the window.

STEP 10

2'-10 3/4"

6'-7

3/4"

Assemble and Install Coop Door11.1 Assemble the door frame using 2 1/2 “ x 1 1/2 “ pressure-treated material. Use the illustration below as a reference.

11.2 Use 1 1/2 “ x 3/4 “ pressure-treated material for the door trim and secure with 2” wood screws.

11.3 Prepare and install starter courcer from the pressure-treated lumber

with cross section 1/4" x 3/4".

11.4 Install the exterior siding of the door using 1/2 “ x 6” siding boards in accordance with the illustration below.

11.5 Assemble siding shields with 2" galvanized nails.

11.6 Install three 3" door hinges using 2x1" wood screws. Finish the door installation by attaching 4" surface bolt and 6" door pull.

STEP 11

11'-3 1/4"

5'-4"

5'-4"

Installing Corrugated Roofing12.1 You will need 120 Sq Ft of corrugated roofing to cover the roof.

12.2 Fasten the panels with 1 1/2" sheet metal screw with neoprene washer.

12.3 Prepare and install metal roof ridge cap according to the drawing.

STEP 12

Coop DecorationNow that your coop is all done, you are ready to decorate it any way you want using your favorite

paint, stain, or preservative.

STEP 13

CopyrightThe text and illustrations that appear here are the exclusive property of howtoplans.org and are protected by federal copyright laws. The duplication, sale or distribution of any portion of these plans without prior written consent from the original designer will be subject to the appropriate penalties for copyright infringement. Sharing this plan on the web is only permited with an indicated original source: https://www.howtoplans.org

For more great HOW-TO plans please visit: www.howtoplans.org

.orgHowtoPlans

https://www.howtoplans.org/

10x8 hen house for 30 hens - howtoplans.org · 10x8 hen house for 30 hens author: howtoplans.org...

Documents