109 110 - prosoft · 111 112 2011 master catalog media converters accessories serial device...
TRANSCRIPT
109 110www.etherwan.com
112111
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Selection Guide / Media Converters Selection Guide / Media Converters
Model Name EL9100 EL9000 EL9020 EL2326
Interface
Max. 100 BASE-T - - - -
Max. 10/100 BASE-TX - - - -
Max. 1000 BASE-T - 1 - -
Max. 10/100/1000 BASE-T 1 - 1 1
Max. 100 BASE-FX/BX WDM - - - 1
Max. 100 BASE-SFP - - - -
Max. 1000 BASE-SX/LX/BX 1 1 - 1
Max. 1000 BASE-SFP - - 1 -
Max. PoE Ports - - - -
Web Management - - - -
Alarm Contact √ √ √ -
Mode of Operations
Auto-negotiation, Auto-MDI/MDI-X √ √ √ √
Flow Control √ √ √ √
Store & Forward √ √ √ √
Link Fault Pass Through √ √ √ √
Machanical
Casing aluminum aluminum aluminum metal
Installation* D, P, R D, P, R D, P, R W
Dimensions (WxHxD) 50x110x135 50x110x135 50x110x135 100x32.5x122
Power Input
No. of Power Input 3 2 3 1
Terminal Block 12 - 48VDC 12 - 48VDC 12 - 48VDC -
DC Jack 12VDC 12VDC 12VDC 12VDC
Operating Temperature
-5˚C to 55˚C - - - √
-10˚C to 60˚C - - - -
-40˚C to 75˚C √ √ √ -
Regulatory Approvals
CE / FCC √ √ √ √
VCCI √ √ √ √
UL508 √ - √ -
ISA12.12.01 / UL1604 - √ - -
EN50121-4 - - - -
UL/cUL 60950-1 - √ - -
Page No. 117 119 121 123
* C: Chassis Supported, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting
Gigabit >>
Model Name EM1100EM2100
EM1100SEM2100S
EM1000EM2000 EL2315 EM1020
Interface
Max. 100 BASE-T - - - - -
Max. 10/100 BASE-TX - - - - -
Max. 1000 BASE-T - - 1 - 1
Max. 10/100/1000 BASE-T 1 - - 1 -
Max. 100 BASE-FX/BX WDM - - - - -
Max. 100 BASE-SFP - - - 1 -
Max. 1000 BASE-SX/LX/BX 1 2 1 - -
Max. 1000 BASE-SFP - - - 1 1
Max. PoE Ports - - - - -
Web Management - - - - -
Alarm Contact - - - - -
Mode of Operations
Auto-negotiation, Auto-MDI/MDI-X √ - √ √ √
Flow Control √ - - √ -
Store & Forward √ - - √ -
Link Fault Pass Through - - √ √ √
Machanical
Casing aluminum aluminum aluminum aluminum aluminum
Installation* C, W C, W C, W C, W C, W
Dimensions (WxHxD) 80.3x109.2x23.8 80.3x109.2x23.8 80.3x109.2x23.8 80.3x109.2x23.8 80.3x109.2x23.8
Power Input
No. of Power Input 1 1 1 1 1
Terminal Block - - - - -
DC Jack 1 1 1 1 1
Operating Temperature
0˚C to 45˚C √ √ √ √ √
-10˚C to 60˚C - - - - -
-40˚C to 75˚C - - - - -
Regulatory Approvals
CE / FCC √ √ √ √ √
VCCI √ √ √ √ √
UL508 - - - - -
ISA12.12.01 / UL1604 - - - - -
EN50121-4 - - - - -
UL/cUL 60950-1 - - - - -
Page No. 125 127 129 131 133
Gigabit >>
* C: Chassis Supported, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting
NEW NEW
114113
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Model Name EM120 EL100 EL200 EL50 EN303
Interface
Max. 100 BASE-T - 1 1 - -
Max. 10/100 BASE-TX - 1 1 1 1
Max. 1000 BASE-T - - - - -
Max. 10/100/1000 BASE-T - - - - -
Max. 100 BASE-FX/BX WDM 2 1 1 1 1
Max. 100 BASE-SFP - - - - -
Max. 1000 BASE-SX/LX/BX - - - - -
Max. 1000 BASE-SFP - - - - -
Max. PoE Ports - - - - -
Web Management - - - - -
Alarm Contact - - - - -
Mode of Operations
Auto-negotiation, Auto-MDI/MDI-X - √ √ √ √
Flow Control - √ √ √ √
Store & Forward - √ √ √ √
Link Fault Pass Through - √ √ - -
Machanical
Casing aluminum aluminum aluminum metal -
Installation* C, W C, W C, W W PCI
Dimensions (WxHxD) 80.3x109.2x23.8 80.3x109.2x23.8 80.3x109.2x23.8 54.2x80.3x21.9 120x56
Power Input
No. of Power Input 1 1 1 1 1
Terminal Block - - - - -
DC Jack 12VDC 12VDC 12VDC 12VDC -
Operating Temperature
0˚C to 45˚C √ √ √ √ √
-10˚C to 60˚C - - - - -
-40˚C to 75˚C - - - - -
Regulatory Approvals
CE / FCC √ √ √ √ √
VCCI √ √ √ √ -
UL508 - - - - -
ISA12.12.01 / UL1604 - - - - -
IEC61850-3 - - - - -
EN50121-4 - - - - -
UL/cUL 60950-1 - √ √ - -
Page No. 149 151 153 155 157
Fast Ethernet >>
Selection Guide / Media Converters Selection Guide / Media Converters
Fast Ethernet >>
Model Name EL1141 EL900 EX42011 EL1032 EL1033 EL150AEL150
Interface
Max. 100 BASE-T - - - - - -
Max. 10/100 BASE-TX 1 1 1 1 1 1
Max. 1000 BASE-T - - - - - -
Max. 10/100/1000 BASE-T - - - - - -
Max. 100 BASE-FX/BX WDM 1 1 1 1 1 1
Max. 100 BASE-SFP - - - - - -
Max. 1000 BASE-SX/LX/BX - - - - - -
Max. 1000 BASE-SFP - - - - - -
Max. PoE Ports - - - PSE PD -
Web Management - - - - - √
Alarm Contact √ √ - - - -
Mode of Operations
Auto-negotiation, Auto-MDI/MDI-X √ √ √ √ √ √
Flow Control √ √ √ √ √ √
Store & Forward √ √ √ √ √ √
Link Fault Pass Through √ √ - √ √ -
Machanical
Casing aluminum aluminum plastic aluminum aluminum aluminum
Installation* D, P, R D, P, R D D, P D, P W
Dimensions (WxHxD) 50x110x135 50x110x135 26x70x110 70x110x30 70x110x30 80x145x20
Power Input
No. of Power Input 3 2 1 2 2 1
Terminal Block 12 - 48VDC 10 - 48VDC 12 - 48VDC 48VDC 48VDC -
DC Jack 12VDC 12VDC 12VDC 48VDC 48VDC 12VDC
Operating Temperature
0˚C to 45˚C - - - - - √
-10˚C to 60˚C - - √ √ √ -
-40˚C to 75˚C √ √ - - - -
Regulatory Approvals
CE / FCC √ √ √ √ √ √
VCCI √ √ √ √ √ √
UL508 √ - - √ √ -
ISA12.12.01 / UL1604 - √ - - - -
IEC61850-3 √ - - - - -
EN50121-4 √ - - - - -
UL/cUL 60950-1 - √ √ - - -
Page No. 135 137 139 141 143 145 / 147
Fast Ethernet >>
* C: Chassis Supported, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting * C: Chassis Supported, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting
116115
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Model Name WA4281 WA4271 WA4184 SW5400
Ethernet Interface
Max. 10/100 BASE-TX 2 2 1 1
Max. 100 BASE-FX - - - -
1.5KV Managetic Isolation - - - √
Wireless IEEE802.11a/b/g IEEE802.11a/b/g IEEE802.11a/b/g IEEE802.11b/g
No. of RF 2 2 1 1
PoE PD/PSE PD/PSE - -
Serial Interface
RS-232/422/485 - - - 1
Connector Type - - - TB5, DB9
ESD Protection - - - 15KV
Speed - - - 110 bps to 921.6 Kbps
Flow Control - - - RTS/CTS, Xon/Xoff
Software
Opertaion Modes AP/Bridge/Mesh AP/Bridge/Mesh AP/Bridge/Mesh TCP, UDP, Pair Connection
COM Driver Support - - - Windows 2000/XP/2003
Configuration Options Web, SNMP Web, SNMP Web Web, Telnet and Serial Consoles
Security
WEP √ √ √ √
WPA-PSK / WPA2-PSK √ √ √ √
TKIP √ √ √ √
Machanical
Casing aluminum plastic aluminum aluminum
Installation* P P P D, P
Internationl Protection 67 65 66 30
Dimensions (WxHxD) 240x58x270 230x78.5x230 152x238x58.8 55x77.2x88
Power Input
Terminal Block - - - 9 - 30VDC
PoE IEEE802.3af IEEE802.3af 24VDC -
Operating Temperature
-10˚C to 60˚C - - - √
-20˚C to 70˚C - √ - -
-30˚C to 70˚C - - √ -
-30˚C to 80˚C √ - - -
Regulatory Approvals
CE / FCC √ √ √ √
DSPR (TELEC) √ √ - -
Page No. 169 171 173 223
* D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting
Multiple Channel >>
Model Name EMC1600 EMC1200R EMMC800M EX1605PBF1
Interface
Max. 100 BASE-T 16 12 - -
Max. 10/100 BASE-TX 16 12 8 4
Max. 1000 BASE-T 16 12 - -
Max. 10/100/1000 BASE-T 16 12 - -
Max. 100 BASE-FX/BX WDM 32 24 8 1
Max. 100 BASE-SFP 16 12 - -
Max. 1000 BASE-SX/LX/BX 32 24 - -
Max. 1000 BASE-SFP 16 12 - -
Max. PoE Ports - - - -
Web Management - - - -
Alarm Contact - - - -
Mode of Operations
Auto-negotiation, Auto-MDI/MDI-X √ √ √ √
Flow Control √ √ √ √
Store & Forward √ √ √ √
Link Fault Pass Through √ √ √ √
Machanical
Casing metal metal metal metal
Installation* R R R -
Dimensions (WxHxD) 440x276x90 440x243x45 440x235x44 160x80.5x28
Power Input
No. of Power Input 2 2 2 1
Terminal Block ±48VDC ±48VDC - -
AC Outlet 100 - 240VDC 100 - 240VDC 100 - 240VDC 100 - 240VDC
Operating Temperature
0˚C to 45˚C √ √ √ √
-10˚C to 60˚C - - - -
-40˚C to 75˚C - - - -
Regulatory Approvals
CE / FCC √ √ √ √
VCCI √ - - -
UL508 - - - -
ISA12.12.01 / UL1604 - - - -
EN50121-4 - - - -
UL/cUL 60950-1 √ - - -
Page No. 159 161 163 167
Multiple Channel >>
Selection Guide / Media Converters Selection Guide / Media Converters
* C: Chassis Supported, D: DIN-Rail Mounting, P: Panel Mounting, R: Rack Mounting, W: Wall Mounting
NEW NEW
118117
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
TechnologyStandards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
EnvironmentOperating Temperature
-40°C to 75°C (-40°F to 167°F)Tested @ -40°C to 85°C (-40°F to 185°F))
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL508
EMI FCC Part 15, Class A EN61000-6-4
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 2.7GHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerInput Voltage: 12 to 48VDC (Terminal Block);
12VDC (DC Jack)
Power Consumption
7.68W Max, 0.16A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
IP30
Dimensions 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight 0.8Kg (1.76lbs.)
Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
InterfaceEthernet Port 10/100/1000BASE-TX: 1 port
1000BASE-SX/LX/BX: 1 port
LED Indicators Per Unit: Power Status (Power1, Power2, Power3, Fault),
LFPT
Per Port: 10/100/1000TX: Link/Activity, Speed,
Full-duplex/Collision
1000SX/LX/BX: Link/Activity
Relay Contact Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Specifications
Value Specific design for industrial communication applications with
UL508 safety certification Harsh environment design and supports auto
10/100/1000BASE-T Ethernet transmission DIP switch design for Link-Fault-Pass-Through, fiber auto/
force mode, link down alarm configuration
Wide Temp ITS UL508
EL9100 SeriesHardened 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Media Converter
Features Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/
force mode, link down alarm 10/100/1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate Alarms for power and port link failure by relay output Redundant power inputs with Terminal Block and DC Jack -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation
Ordering InformationEL9100-X1B 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter
Gigabit Options :
(X) = 3 : 1000BASE-SX (SC) - 550m
4 : 1000BASE-SX (SC) - 2Km (1310nm)
5 : 1000BASE-SX (ST) - 550m
A : 1000BASE-LX (SC) - 10Km
B : 1000BASE-LX (SC) - 20Km
H : 1000BASE-LX (ST) - 10Km
I : 1000BASE-LX (ST) - 20Km
R : 1000BASE-BX (SC) WDM - TX:1310nm/RX:1550nm - 20Km
S : 1000BASE-BX (SC) WDM - TX:1550nm/RX:1310nm - 20Km
Power Supply : (Optional)
*Option A - The Terminal Block type external power supplyies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
Installation Type : DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
Diagrams Unit: mm
Front Side Back Top Bottom
135
50
110
Power1
GN
D D
Power
2
Power 3
+
-
+
-
120119
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Features Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in
hazardous locations (Applicable to versions with Terminal Block power option)
DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/force mode, link down alarm
1000Mbps-Auto/Full-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation
Ordering InformationEL9000-X-Y-I-P 1000BASE-T to 1000BASE-SX/LX Hardened Media Converter
Gigabit Options :
(X) = A : 1000BASE-T (for Port 1 only)
(Y) = B : 1000BASE-SX (SC)
C : 1000BASE-SX (SC) - 2Km (1310nm)
N : 1000BASE-LX (SC) - 10Km
O : 1000BASE-LX (SC) - 20Km
R : 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 20Km
S : 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 20Km
*More Gigabit options also available upon request
Installation Type :
(I) = 1: DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
Power Connector Options :
(P) = A : Terminal Block* / B : DC Jack**
*Option A - The Terminal Block type external power supplies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
Value Highly qualified for explosive environmental Gigabit Ethernet
applications and certified by UL with ISA12.12.01 Class I, Division 2 Classified for use in hazardous locations
Wide temp range for extreme environments
EL9000 SeriesHardened 1000BASE-T to 1000BASE-SX/LX/BX Media Converter
TechnologyStandards IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX,
IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
EnvironmentOperating Temperature
-40°C to 75°C (-40°F to 167°F)Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL1604, Hazardous locations: Class 1, Division 2 group A,B,C&D UL60950-1
EMI FCC Part 15, Class A EN61000-6-3
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 2.7GHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerInput Input Voltage: 10 to 48VDC (Terminal Block);
12VDC (DC Jack)
Power Consumption
9.12W Max, 0.76A @ 12VDC, 0.38A @ 24VDC,
0.19A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
IP30
Dimensions 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight 0.8Kg (1.76lbs.)
Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
InterfaceEthernet Port 1000BASE-T: 1 port
1000BASE-SX/LX: 1 port
LED Indicators Per Unit: Power Status (Power1, Power2, Fault)
Per Port: 1000T, 1000SX/LX: LNK, TX, RX
Relay Contact Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Specifications
Wide Temp ITS
Diagrams Unit: mm
Front Side Back Top Bottom
FAU
L T
GN
DPW
R2
PWR1
GN
D
F AU
LT
DC 12V
DC JACK
TERMINAL BLOCK
135
50
110
DC JACK
TERMINAL BLOCK
122121
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Side Back Top Bottom
TechnologyStandards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
IEEE802.3ab1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
EnvironmentOperating Temperature
-40°C to 75°C (-40°F to 167°F)Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL508
EMI FCC Part 15, Class A EN61000-6-3
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 2.7GMHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerVoltage Input: 12 to 48VDC (Terminal Block); 12VDC (DC Jack)
Power Consumption
7.68W, Max., 0.16A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
IP30
Dimensions 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight 0.8Kg (1.76lbs.)
Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
InterfaceEthernet Port 10/100/1000BASE-TX: 1 port
Gigabit SFP: 1 port
LED Indicators Per Unit: Power Status (Power1, Power2, Power3, Fault),
LFPT
Per Port: 10/100/1000TX: Link/Activity, Speed, Full-
duplex/Collision
Gigabit SFP: Link/Activity
Relay Contact Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Specifications
Value SFP socket flexible for Gigabit fiber optic expansion Harsh environment design and supports auto
10/100/1000BASE-T Ethernet transmission Specific design for industrial communication applications with
UL508 safety certification
EL9020 SeriesHardened 10/100/1000BASE-TX to Gigabit SFP Media Converter
135
50
110
Wide Temp ITS UL508
Features Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/
force mode, link down alarm 1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX SFP socket offers Gigabit fiber optic selection flexibility
Full wire-speed forwarding rate Alarms for power and port link failure by relay output Redundant power inputs with Terminal Block and DC Jack
interfaces -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation
Ordering InformationEL9020-00B 10/100/1000BASE-TX to Gigabit SFP Hardened Media Converter
SFP Hardened Type Gigabit Fiber Transceiver: (Optional)
Part Number Typical Distance Wavelength (nm) Cable Type Connector
EX-1250NSP-SB1L-A 275M/550M 850 MM Duplex LC
EX-1250TSP-MB4L-A 10KM 1310 SM Duplex LC
EX-1250TSP-NB6L-A 40KM 1310 SM Duplex LC
EX-1250TSP-KB8L-A 70KM 550 SM Duplex LC
EX-1250TBP-MB1L-A 550M TX:1310 / RX:1550 MM WDM-A LC
EX-1250TBP-LB1L-A 550M TX:1550 / RX:1310 MM WDM-B LC
EX-1250TBP-MB4L-A 10KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB4L-A 10KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-MB5L-A 20KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB5L-A 20KM TX:1550 / RX:1310 SM WDM-B LC
*More Gigabit options available upon request
Power Supply : (Optional)
*Option A - The Terminal Block type external power supplies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X X=1,2,3,4,5
Installation Type : DIN Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
124123
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
NEW
Value Auto sense for the fiber transmission rate at 100BASE and
1000BASE connections Mechanical design prevents physical contact with fiber
transceiver while the case is sealed Supports Dying Gasp for device failure report
Features Complies with IEEE802.3 10BASE-T, 802.3u 100BASE-TX,
802.3ab 1000BASE-T, 802.3z 1000BASE-X
Complies with IEEE 802.3ah OAM standard
Supports SNMP V1, V2 Management
Supports Q in Q double tagged frame transparent
Supports IN-BAND Loop Back and Diagnostic
Gigabit transmission supports 9K bytes jumbo frame
Built-in Fiber Tray, for ease of fiber cable management and
installation
One fiber interface supports dual rate 100BASE-FX and
1000BASE fiber transmission
Supports IEEE802.3x Flow controls: Flow control for full duplex
and Back pressure for half duplex
Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Ordering InformationEL2326-X1Z OAM Managed 10/100/1000BASE-TX to 100BASE/1000BASE Dual Rate Media Converter
Gigabit Options :(X) = 3 : 1000BASE-SX (SC) - 550m
4 : 1000BASE-SX (SC) - 2Km (1310nm)
5 : 1000BASE-SX (ST) - 550m
A : 1000BASE-LX (SC) - 10Km
B : 1000BASE-LX (SC) - 20Km
C : 1000BASE-LX (SC) - 50Km
D : 1000BASE-LX (SC) - 75Km
P : 1000BASE-BX (SC) WDM –TX:1310nm/RX:1550nm - 10Km
Q : 1000BASE-BX (SC) WDM –TX:1550nm/RX:1310nm - 10Km
R : 1000BASE-BX (SC) WDM –TX:1310nm/RX:1550nm - 20Km
S : 1000BASE-BX (SC) WDM –TX:1550nm/RX:1310nm - 20Km
(Z) = A : with external power adapter for AU
E : with external power adapter for EU
R : with external power adapter for JP
K : with external power adapter for UK
U : with external power adapter for USA
EL2326 SeriesOAM Managed 10/100/1000BASE-TX to 100/1000BASE-FX Dual Rate Media Converter
Technology
Standards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
Environment
Operating Temperature
-5°C to 55°C (-23°F to 131°C)
Storage Temperature
-20°C to 70°C (-4°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A, FCC Part 15 Class A VCCI Class A
Power
Input Input Voltage: 12VDC
Power Consumption
3W Max. 0.25A @ 12VDC
Mechanical
Casing Metal case
IP30
Dimensions 100 mm (W) x 122mm (D) x 32.5mm (H)
(3.94"(W) x 4.8" (D) x 1.28" (H))
Weight 0.5Kg (1.76lbs.)
Installation Wall Mounting
Interface
Ethernet Port 10/100/1000BASE-TX: 1 port
100/1000BASE-SX/LX/BX: 1 port
LED Indicators Per Unit: Power Status, OAM loop
Per Port: TX Speed, Link/Activity, Full-duplex
Specifications
Diagrams Unit: mm
Front Side Top Bottom
100mm
122m
m
100mm
111.5mm
122mm
30m
m
32. 5
mm
Back
100
111.5
122
3032.5
100
122
126125
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
TechnologyStandards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps
Packet Buffer Memory
2M bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
4.25W Max. 0.35A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.3" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or use with EMC1600 media converter
chassis system
InterfaceEthernet Port 10/100/1000BASE-TX: 1 port
1000BASE-SX/LX/BX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100/1000TX: Link/Activity, Speed, Full-
duplex/Collision
1000SX/LX: Link/Activity
Specifications
Value Smart 10/100/1000BASE-TX and 1000BASE-SX/LX/BX
conversion design without any configuration Supports chassis system installation for easy management
and power redundancy accomplishment
Features 2M bits buffer memory
1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-
Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Aluminum case
Packed with 12VDC external universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Supports Wall Mounting installation or use with EMC1600 media
converter chassis system
Ordering InformationEM1100TSC 10/100/1000BASE-TX to 1000BASE-SX (SC) - 550m Media Converter
EM1100TSC-2 10/100/1000BASE-TX to 1000BASE-SX (SC) - 2Km Media Converter (1310nm)
EM1100TLC-10 10/100/1000BASE-TX to 1000BASE-LX (SC) - 10Km Media Converter
EM1100TLC-20 10/100/1000BASE-TX to 1000BASE-LX (SC) - 20Km Media Converter
EM1100TLC-50 10/100/1000BASE-TX to 1000BASE-LX (SC) - 50Km Media Converter
EM2100TLCA-10 10/100/1000BASE-TX to 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 10Km Media Converter
EM2100TLCB-10 10/100/1000BASE-TX to 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 10Km Media Converter
EM2100TLCA-20 10/100/1000BASE-TX to 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EM2100TLCB-20 10/100/1000BASE-TX to 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EM2100TLCA-60 10/100/1000BASE-TX to 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 60Km Media Converter
EM2100TLCB-60 10/100/1000BASE-TX to 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 60Km Media Converter
NOTES :
*EMC1600, proprietary 19" chassis system, can house up to 16xEM1100/EM2100 Series Converters
*EMC1600 Chassis System is available separately
*More Gigabit fiber options are also available upon request
Diagrams Unit: mm
Front Top Side
EM1100/EM2100 Series10/100/1000BASE-TX to 10/1000BASE-FX Media Converter
Back
23.8
109.
2
80.3
128127
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
TechnologyStandards IEEE802.3z 1000BASE-SX/1000BASE-LX
Forward and Filtering Rate
1,488,100pps for 1000Mbps
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
2.4W Max. 0.2A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.3" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or use with EMC1600 media converter
chassis system
InterfaceEthernet Port 1000BASE-SX/LX/BX: 2 ports
LED Indicators Per Unit: Power Status (Power)
Per Port: 1000SX/LX: Link
Specifications
Value Supports chassis system installation for easy management
and power redundancy accomplishment Fiber to fiber transmission and conversion, offers the flexibility
of transmission distance extension
Features 1000Mbps-Full-duplex, Auto-Negotiation
Full wire-speed forwarding rate
Packed with 12VDC external universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Aluminum case
Supports Wall Mounting installation or use with EMC1600 media
converter chassis system
Ordering InformationEM1000SLC-10 1000BASE-SX (SC) - 550m to 1000BASE-LX (SC) - 10Km Media Converter
EM1000SLC-20 1000BASE-SX (SC) - 550m to 1000BASE-LX (SC) - 20Km Media Converter
EM1000SLC-50 1000BASE-SX (SC) - 550m to 1000BASE-LX (SC) - 50Km Media Converter
EM2000SLCA-10 1000BASE-SX (SC) - 550m to 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 10Km Media Converter
EM2000SLCB-10 1000BASE-SX (SC) - 550m to 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 10Km Media Converter
EM2000SLCA-20 1000BASE-SX (SC) - 550m to 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EM2000SLCB-20 1000BASE-SX (SC) - 550m to 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EM2000SLCA-60 1000BASE-SX (SC) - 550m to 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 60Km Media Converter
EM2000SLCB-60 1000BASE-SX (SC) - 550m to 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 60Km Media Converter
NOTES :
*1000BASE-LX to 1000BASE-LX converters are also available
*EMC1600, proprietary 19" chassis system, can house up to 16xEM1000S/EM2000S Series Converters
*EMC1600 Chassis System is available separately
*More Gigabit fiber options are also available upon request
Diagrams Unit: mm
Front Top Side
EM1000S/EM2000S Series1000BASE-SX/LX to 1000BASE-LX/BX Media Converter
1000BASE-SX/LX
BA
1000BASE-SX/LX
SDB
SDA
PWR
DC12V
Back
23.8
80.3
109.
2
130129
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Top Side
Technology
Standards IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX,
IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
Environment
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
Power
Input Input Voltage: 12VDC
Power Consumption
2.4W Max. 0.2A @ 12VDC
Mechanical
Casing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.3" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or use with EMC1600 media converter
chassis system
Interface
Ethernet Port 1000BASE-T: 1 port
1000BASE-SX/LX/BX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 1000T, 1000SX/LX: Link, Full-duplex/Collision
1000SX/LX: Link, Transmit, Receive
Specifications
Value Fastest gigabit Ethernet transmission converting design Supports chassis system installation for easy management
and power redundancy accomplishment Simple DIP switch design for Link-Fault-Pass-Through, fiber
auto/force mode configuration
Features 1000Mbps-Auto/Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Packed with 12VDC external universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Aluminum case
Supports Wall Mounting installation or use with EMC1600 media
converter chassis system
Ordering InformationEM1000TSC 1000BASE-T to 1000BASE-SX (SC) - 550m Media Converter
EM1000TSC-2 1000BASE-T to 1000BASE-SX (SC) - 2Km Media Converter (1310nm)
EM1000TLC-10 1000BASE-T to 1000BASE-LX (SC) - 10Km Media Converter
EM1000TLC-20 1000BASE-T to 1000BASE-LX (SC) - 20Km Media Converter
EM1000TLC-50 1000BASE-T to 1000BASE-LX (SC) - 50Km Media Converter
EM2000TLCA-10 1000BASE-T to 1000BASE-LX (SC) WDM -TX:1310nm/RX:1550nm - 10Km Media Converter
EM2000TLCB-10 1000BASE-T to 1000BASE-LX (SC) WDM -TX:1550nm/RX:1310nm - 10Km Media Converter
EM2000TLCA-20 1000BASE-T to 1000BASE-LX (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EM2000TLCB-20 1000BASE-T to 1000BASE-LX (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EM2000TLCA-60 1000BASE-T to 1000BASE-LX (SC) WDM -TX:1310nm/RX:1550nm - 60Km Media Converter
EM2000TLCB-60 1000BASE-T to 1000BASE-LX (SC) WDM -TX:1550nm/RX:1310nm - 60Km Media Converter
NOTES :
*EMC1600, proprietary 19" chassis system, can house up to 16xEM1000/EM2000 Series Converters
*EMC1600 Chassis System is available separately
*More Gigabit fiber options are also available upon request
EM1000/EM2000 Series1000BASE-T to 1000BASE-SX/LX/BX Media Converter
23.8
80.3
109.
2
Back
132131
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Top Side
NEW
Technology
Standards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX,
IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
Environment
Operating Temperature
0°C to 50°C (32°F to 122°C)
Storage Temperature
-10°C to 70°C (-14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
Power
Input Input Voltage: 12VDC
Power Consumption
2.76W Max. 0.23A @ 12VDC
Mechanical
Casing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.3" (D) x 0.94" (H))
Weight 0.5Kg (1.76lbs.)
Installation Wall Mounting
InterfaceEthernet Port 10/100/1000BASE-TX: 1 port
100/1000BASE SFP slot: 1 port
LED Indicators Per Unit: Power Status, LFPT
Per Port: FX/TX Speed, Link/Activity
Specifications
Value Offers SFP fiber transmission rate at 100BASE and
1000BASE Ethernet connection Supports chassis system installation for easy management
and power redundancy
Features Complies with IEEE802.3 10BASE-T, 802.3u 100BASE-TX,
802.3ab 1000BASE-T, 802.3z 1000BASE-X
Supports IEEE802.3x Flow controls: Flow control for full duplex
and Back pressure for half duplex
SFP fiber interface supports 100BASE and 1000BASE dual rate
fiber transmission
DIP switch configuration for "Link-Fault-Pass-Through," fiber auto/
force mode
Gigabit transmission supports 9K bytes jumbo frame
Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Packed with 12VDC external universal PSU
Supports Wall Mounting installation or use with EMC1600 media
converter chassis system
Ordering InformationEL2315 10/100/1000BASE-TX to 100BASE/1000BASE Dual Rate SFP Media Converter
SFP Non-Hardened Type Gigabit Fiber Transceiver: (Optional)
Part Number Typical Distance Wavelength (nm) Cable Type Connector
EX-1250NSP-SB1L 275M/500M 850 MM Duplex LC
EX-1250TSP-MB4L 10KM 1310 SM Duplex LC
EX-1250TSP-NB6L 40KM 1310 SM Duplex LC
EX-1250TSP-KB8L 70KM 1550 SM Duplex LC
EX-1250TSP-CB8L 70KM TX:1470 / RX:1610 CWDM Duplex LC
EX-1250TBP-MB1L 550M TX:1310 / RX:1550 MM WDM-A LC
EX-1250TBP-LB1L 550M TX:1550 / RX:1310 MM WDM-B LC
EX-1250TBP-MB4L 10KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB4L 10KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-MB5L 20KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB5L 20KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-NB6L-D 40KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB6L-D 40KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-NB7L-D 60KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB7L-D 60KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-CB8L-D (1490nm) 80KM TX:1490 / RX:1570 SM WDM-A LC
EX-1250TBP-CB8L-D (1570nm) 80KM TX:1570 / RX:1490 SM WDM-B LC
NOTES :*More SFP options also available upon request*EMC1600, proprietary 19" chassis system, can house up to 16xEL2315 Series Converters*EMC1600 Chassis System is available separately
EL2315 Series10/100/1000BASE-TX to 100/1000BASE-FX Dual Rate SFP Media Converter
80.30
109.
20
23.8
0
10/100/1000BASE
G:GE
LNKCPWR
LFPT
LNKF
A:100GE
DC12V
DC12V
Back
80.3
23.8
109.
210
9.2
134133
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Top Side
TechnologyStandards IEEE802.3ab 1000BASE-T,
IEEE802.3z 1000BASE-SX/1000BASE-LX,
IEEE802.3x
Forward and Filtering Rate
1,488,100pps for 1000Mbps
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
2.4W Max. 0.2A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.3" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or use with EMC1600 media converter
chassis system
InterfaceEthernet Port 1000BASE-T: 1 port
Gigabit SFP: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 1000T: Link, Full-duplex/Collision
Gigabit SFP: Link, Transmit, Receive
Specifications
Value SFP socket flexible for Gigabit fiber optic expansion Supports chassis system installation for easy management
and power redundancy accomplishment Simple DIP switch design for Link-Fault-Pass-Through, fiber
auto/force mode configuration
Features DIP switch configuration for "Link-Fault-Pass-Through," fiber auto/
force mode
1000Mbps-Auto/Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
SFP socket offers Gigabit fiber optic selection flexibility
Full wire-speed forwarding rate
Packed with 12VDC external universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Aluminum case
Supports Wall Mounting installation or use with EMC1600 media
converter chassis system
Ordering InformationEM1020 1000BASE-T to Gigabit SFP Media Converter
SFP Non-Hardened Type Gigabit Fiber Transceiver: (Optional)
Part Number Typical Distance Wavelength (nm) Cable Type Connector
EX-1250NSP-SB1L 275M/500M 850 MM Duplex LC
EX-1250TSP-MB4L 10KM 1310 SM Duplex LC
EX-1250TSP-NB6L 40KM 1310 SM Duplex LC
EX-1250TSP-KB8L 70KM 1550 SM Duplex LC
EX-1250TSP-CB8L 70KM TX:1470 / RX:1610 CWDM Duplex LC
EX-1250TBP-MB1L 550M TX:1310 / RX:1550 MM WDM-A LC
EX-1250TBP-LB1L 550M TX:1550 / RX:1310 MM WDM-B LC
EX-1250TBP-MB4L 10KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB4L 10KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-MB5L 20KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB5L 20KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-NB6L-D 40KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB6L-D 40KM TX:1550 / RX:1310 SM WDM-B LC
EX-1250TBP-NB7L-D 60KM TX:1310 / RX:1550 SM WDM-A LC
EX-1250TBP-KB7L-D 60KM TX:1550 / RX:1310 SM WDM-B LCEX-1250TBP-CB8L-D
(1490nm) 80KM TX:1490 / RX:1570 SM WDM-A LCEX-1250TBP-CB8L-D
(1570nm) 80KM TX:1570 / RX:1490 SM WDM-B LC
NOTES :
*More Gigabit SFP options also available upon request
*EMC1600, proprietary 19" chassis system, can house up to 16xEM1020 Series Converters
*EMC1600 Chassis System is available separately
EM1020 Series1000BASE-T to Gigabit SFP Media Converter
23.8
80.3
109.
2
Back
136135
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
TechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
-40°C to 75°C (-40°F to 167°F)Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL508
EMI FCC Part 15, Class A EN61000-6-4
- EN55022- EN61000-3-2- EN61000-3-3
EMS IEC61850-3 & IEEE1613: Substation & Power automa-tion Applications EN50121-4: Railway Applications EN61000-6-2
- EN61000-4-2 (ESD Standards)Contact: + / - 8KV; Criteria BAir: + / - 15KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)35V/m, 80 to 1000MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria AD.C. Power Ports: + / - 4KV; Criteria A
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 2KV; Line-to-Line; Criteria AD.C. Power Ports: + / - 2KV; Line-to-earth; Criteria A
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)1000A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerInput Input Voltage: 12 to 48VDC (Terminal Block) /
12VDC(DC Jack)
Power Consumption
2.4W MAX. 0.2A @ 12VDC, 0.05A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
IP30
Dimensions 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight 0.8Kg (1.76lbs.)
Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power 1, Power 2, Fault),
Link-Fault-Pass-Through
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,
Speed
100FX: Link/Activity, Full-duplex/Collision
Relay Contact Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Specifications
Value Specific design for power automation and railway applications
with IEC61850-3, IEEE1613 and EN50121-4 standard compliances
Specific design for industrial communication applications with UL508 safety certification, focus on various Industrial communication applications
Features Complies with IEC61850 EMC and Environment requirement, and
IEEE1613 standard for substation and power automation Complies with EN50121-4 EMC requirement for Railway
applications Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment DIP switch configuration for "Link-Fault-Pass-Through," link down
alarm, speed, duplex mode
768K bits buffer memory 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output Redundant power inputs with Terminal Block and DC Jack -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation
Ordering InformationEL1141-X0B 10/100BASE-TX to 100BASE-FX Hardened Media Converter
100FX Fiber Options :(X) = 1 : Multi Mode (SC)
2 : Multi Mode (ST)A : Single Mode (SC) - 20KmB : Single Mode (SC) - 40KmH : Single Mode (ST) - 20Km6 : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km7 : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km8 : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km9 : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5KmP : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20KmQ : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20KmR : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40KmS : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km*More 100FX Fiber options also available upon request
Diagrams Unit: mm
Front Side Back Top Bottom
EL1141 SeriesIEC61850/IEEE1613 Hardened 10/100BASE-TX to 100BASE-FX Media Converter
Wide Temp ITS UL508 IEEE1613IEC61850
Power Supply : (Optional)*Option - The Terminal Block type external power supply are not included. Please order the following part numbers: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
Installation Type : DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480 50
135
110
Power1
GN
D D
Power 2
Power 3
+
-
+
-
Speed
138137
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
TechnologyStandards IEEE802.3 10Base-T,
IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
-40°C to 75°C (-40°F to 167°F)Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety Hazardous locations: Class 1, Division 2 group A,B,C&DUL60950-1, EN60950-1, IEC60950-1
EMI FCC Part 15, Class A EN61000-6-3
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 1000MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
NEMA TS1/2 Environmental requirements for traffic control equipment
PowerInput Input Voltage: 10 to 48VDC (Terminal Block);
12VDC (DC Jack)
Power Consumption
4.32W MAX. 0.36A @ 12VDC, 0.09A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
IP30
Dimensions 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight 0.8Kg (1.76lbs.)
Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power 1, Power 2, Fault),
Link-Fault-Pass-Through
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,
Speed
100FX: Link/Activity, Full-duplex/Collision
Relay Contact Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Specifications
Value Highly qualified for explosive environmental 10/100BASE
Ethernet applications and certified by UL with ISA12.12.01 Class I, Division 2 Classified for use in hazardous locations specifications
Features Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in
hazardous locations (Applicable to versions with TerminalBlock power option)
DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode
768K bits buffer memory 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation
Ordering InformationEL900-X-Y-I-P Hardened 10/100BASE-TX to 100BASE-FX Media Converter
Diagrams Unit: mm
Front Side Back Top Bottom
EL900 SeriesHardened 10/100BASE-TX to 100BASE-FX Media Converter
100FX Fiber Options :(Y) = B : Multi Mode (SC)
C : Multi Mode (ST)D : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2KmE : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2KmF : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5KmG : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km
*More 100FX Fiber options also available upon request
Q : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20KmR : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20KmS : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40KmT : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40KmM : Single Mode (ST) - 20KmN : Single Mode (SC) - 20KmO : Single Mode (SC) - 40Km
Installation Type : ( I ) = 1 : DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
Power Connector Options :(P) = A : Terminal Block* / B : DC Jack**
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
10/100TX Options :(X) = A : 10/100BASE-TX (for Port 1 only)
FAU
L T
GN
DPW
R2
PWR1
GN
D
FAU
L T
DC 12V
50
135
110
DC JACK
TERMINAL BLOCK
140139
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Side Back Top Bottom
TechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
384K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
-10°C to 60°C (14°F to 140°F)Test @ -20°C to 70°C (-4°F to 158°F)
Storage Temperature
-25°C to 85°C (-13°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL60950-1, EN60950-1, IEC60950-1
EMI FCC Part 15, Class A EN61000-6-3
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 1000MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerInput Input Voltage: 12 to 48VDC (Terminal Block)
Power Consumption
2.4W Max. 0.2A @ 12VDC, 0.1A @ 24VDC,
0.05A @ 48VDC
Reverse Polarity Protection
Present
MechanicalCasing Plastic case
IP30
Dimensions 26mm (W) x 70mm (D) x 110mm (H)
(1.02" (W) x 2.76" (D) x 4.33" (H))
Weight 0.2Kg (0.44lb.)
Installation DIN-Rail (Top hat type 35mm) Mounting
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power1, Power2)
Per Port: 10/100TX, 100FX: Link/Activity (Green),
Speed (Yellow)
Specifications
Value 1-port 10/100BASE-TX and 1-port 100BASE-FX 12 to 48VDC Power inputs -10°C to 60°C (14°F to 140°F) operating temperature range Provides DIN-Rail mounting Full wire-speed forwarding rate
Features Provides 1-port 10/100BASE-TX plus 1-port 100BASE-FX
The fiber port is available with SC or ST with a fiber connection
that can reach up to 120Km (74.4miles)
-10°C to 60°C (-14°F to 140°F) and is tested for functional
operation @ -20°C to 70°C (-4°F to 158°F)
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Supports 12 to 48VDC Power inputs
Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
384K bits buffer memory
Ordering InformationEX42011-XY-I-P Industrial 10/100BASE-TX to 100BASE-FX Media Converter
100FX Fiber Options :
(XY) = 1A : Multi Mode (SC)
1B : Multi Mode (ST)
2A : Single Mode (SC) - 20Km
2B : Single Mode (SC) - 40Km
2D : Single Mode (ST) - 20Km
1H : Multi Mode (SC) WDM -TX: 1310nm/RX:1550nm - 2Km
1J : Multi Mode (SC) WDM -TX: 1310nm/RX:1550nm - 5Km
2E : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km
2F : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km
1I : Multi Mode (SC) WDM -TX: 1550nm/RX:1310nm - 2Km
1K : Multi Mode (SC) WDM -TX: 1550nm/RX:1310nm - 5Km
2G : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km
2H : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
*More 100FX Fiber options available upon request
Installation Type :
(I) = 1 : DIN-Rail (mounting kit is included)
Power Connector Options :
(P) = A : Terminal Block*
*Option A - The Terminal Block type external power supplies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
EX42011 SeriesHardened 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Media Converter
PWR
GN
D
76.5
113.
64
26
110
70
142141
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
TechnologyStandards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX,
IEEE802.3af PoE
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
2.25M bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
-10°C to 60°C (14°F to 140°F)Test @ -20°C to 70°C (-4°F to 158°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL508
EMI FCC Part 15, Class A EN61000-6-4
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 1000MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerInput Input Voltage: 48VDC
Power Consumption
3.6W Max. 0.075A @ 48VDC
19.2W, 0.4A @ 48VDC when PoE link with PD Class 0
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
Dimensions 70mm (W) x 110mm (D) x 30mm (H)
(2.76" (W) x 4.33" (D) x 1.18" (H))
Weight 0.25Kg (0.55lb.)
Installation DIN-Rail (Top hat type 35mm), Panel, Wall Mounting
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,
Speed
100FX: Link/Activity
PoE: PD connect/PD disconnect
Specifications
Value Specific design for industrial communication applications with
UL508 safety certification Fully complies with IEEE802.3af PoE/PSE standard Easy power source management from dual power interfaces
Features Complies with IEEE802.3af PoE/PSE standard to offer 15.4W for
powering PoE/PD device, such as IP Camera, Wireless AP and VoIP phone.
DIP switch configuration for "Link-Fault-Pass Through" speed, duplex mode
10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto-MDI/MDIX
Supports full wire-speed forwarding rate Offers 2.25M bits buffer memory Industrial operating temperature -10°C to 60°C (14°F to 140°F) Aluminum case Supports DIN-Rail, Panel or Wall Mounting installation
Ordering InformationEL1032-X-O-B Industrial 10/100BASE-TX to 100BASE-FX Media converter with PoE/PSE
100FX Fiber Options:
(X) = 1 : Mu l t i Mode (SC)
2 : Multi Mode (ST)
A : Single Mode (SC) - 20Km
B : Single Mode (SC) - 40Km
H : Single Mode (ST) - 20Km
6 : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km
7 : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km
8 : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km
9 : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km
P : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km
Q : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km
R : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km
S : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
*More 100FX Fiber Options available upon request
Power Supply : (Optional)
*Option A - The Terminal Block type external power supplies are not included. Please order the part number: DR-75-48
**Option B - The external power adapter and power cord are not included. Please order the part number for indoor use: AS-120P-48
EL1032 SeriesIndustrial 10/100BASE-TX to 100BASE-FX Media Converter with PoE/PSE
70
70m
m
110
30
Top
Left Side Front Right Side
Bottom
144143
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Top
Left Side Front Right Side
Bottom
TechnologyStandards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX,
IEEE802.3af PoE
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
2.25M bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
-10°C to 60°C (14°F to 140°F)Test @ -20°C to 70°C (-4°F to 158°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL508
EMI FCC Part 15, Class A EN61000-6-4
- EN55022- EN61000-3-2- EN61000-3-3
EMS EN61000-6-2- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)10V/m, 80 to 1000MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)Signal Ports: + / - 4KV; Criteria BD.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)Signal Ports: + / - 1KV; Line-to-Line; Criteria BD.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria AD.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)25g @ 11ms (Half-Sine Shock Pulse; Operation)50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall)1M (3.281ft.)
PowerInput Input Voltage: 48VDC
Power Consumption
3.6W Max. 0.075A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
MechanicalCasing Aluminum case
Dimensions 70mm (W) x 110mm (D) x 30mm (H)
(2.76" (W) x 4.33" (D) x 1.18" (H))
Weight 0.25Kg (0.55lb.)
Installation DIN-Rail (Top hat type 35mm), Panel, Wall Mounting
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,
100FX: Link/Activity
PoE: PSE connect/PSE disconnect
Specifications
Value Specific design for industrial communication application with
UL508 safety certification Complies with IEEE802.3af PoE/PD standard Easy for power source management from dual power
interfaces design
Features Complies with 802.3af PoE/PD standard DIP switch configuration for "Link-Fault-Pass Through" speed,
duplex mode 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto-MDI/MDIX Supports Full wire-speed forwarding rate
Offers 2.25M bits buffer memory Industrial operating temperature -10°C to 60°C (14°F to 140°F) Aluminum case Supports DIN-Rail, Panel or Wall Mounting installation
Ordering InformationEL1033-X0B Industrial 10/100BASE-TX to 100BASE-FX Media converter with PoE/PD
100FX Fiber Options :
(X) = 1 : Mu l t i Mode (SC)
2 : Multi Mode (ST)
A : Single Mode (SC) - 20Km
B : Single Mode (SC) - 40Km
H : Single Mode (ST) - 20Km
6 : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km
7 : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km
8 : Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km
9 : Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km
P : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km
Q : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km
R : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km
S : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
*More 100FX Fiber Options available upon request
Power Supply : (Optional)
*Option A - The Terminal Block type external power supply are not included. Please order the part number: DR-75-48
**Option B - The external power adapter and power cord are not included. Please order the part number for indoor use: AS-120P-48
EL1033 SeriesIndustrial 10/100BASE-TX to 100BASE-FX Media Converter with PoE/PD
70m
m
110
70
30
146145
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Top Side
Specifications
Value Provides IEEE 802.3ah OAM CPE features for OAM CO
device monitoring Supports OAM fault detection, performance monitoring and
remote loopback functionalities Dying Gasp message design for power loss immediate
notification
Features Complies with IEEE 802.3 ah OAM CPE requirements
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX
Supports IN-BAND Loop Back and Diagnostic
Provides MAC address filtering
Alarm by Email-Trap, SNMP-Trap
Provides Telnet, SNMP V1 & V2 and Web Browser Management
Enterprise MIB
Supports Dying Gasp (Power Loss Trap)
256K bits buffer memory
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Ordering InformationEL150AC Managed 10/100BASE-TX to 100BASE-FX Multi Mode (SC) Media Converter
EL150AT Managed 10/100BASE-TX to 100BASE-FX Multi Mode (ST) Media Converter
EL150AC-20 Managed 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20Km Media Converter
EL150AT-20 Managed 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EL150CA-40 Managed 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40Km Media Converter
EL150ACA-2 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km Media Converter
EL150ACB-2 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km Media Converter
EL150ACA-5 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km Media Converter
EL150ACB-5 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km Media Converter
EL150ACA-20 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EL150ACB-20 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EL150ACA-40 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EL150ACB-40 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
EL150A SeriesOAM CPE Managed 10/100BASE-TX to 100BASE-FX Media Converter
20
121.
8
80
TechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x,
IEEE802.1Q, IEEE802.1p, IEEE802.3ah
Standards SNMP V1/V2, TFTP RFC 783, IP RFC 791, ICMP RFC
792, TCP RFC 793,
SMTP RFC 821, Telnet RFC 854, HTTP RFC 2068,
RMON
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
256K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A, FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
3.24W Max. 0.27A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80mm (W) x 121.8mm (D) x 20mm (H)
(3.15" (W) x 4.81" (D) x 0.79" (H))
Weight 150g (0.33lb.)
Installation Desktop
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power, Failure Alarm)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision
100FX: Link/Activity
Back
148147
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
TechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Standards SNMP V1/V2, TFTP RFC 783, IP RFC 791, ICMP RFC
792, TCP RFC 793,
SMTP RFC 821, Telnet RFC 854, HTTP RFC 2068
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
256K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
3.24W Max. 0.27A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80mm (W) x 121.8mm (D) x 20mm (H)
(3.15" (W) x 4.81" (D) x 0.79" (H))
Weight 150g (0.33lb.)
Installation Desktop
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power, Failure Alarm)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision
100FX: Link/Activity
Specifications
Value Management and status monitoring by Telnet, SNMP V1 & V2
or Web Browser
Features Provides MAC address filtering Alarm by Mail-Trap and SNMP-Trap Telnet, SNMP V1 & V2 and Web Browser Management Enterprise MIB One push button to reset the configurations 256K bits buffer memory
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Packed with 12VDC external universal PSU 0°C to 45°C (32°F to 113°F) operating temperature range Aluminum case
Ordering InformationEL150C Managed 10/100BASE-TX to 100BASE-FX Multi Mode (SC) Media Converter
EL150T Managed 10/100BASE-TX to 100BASE-FX Multi Mode (ST) Media Converter
EL150C-20 Managed 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20Km Media Converter
EL150T-20 Managed 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EL150C-40 Managed 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40Km Media Converter
EL150CA-2 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km Media Converter
EL150CB-2 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km Media Converter
EL150CA-5 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km Media Converter
EL150CB-5 Managed 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km Media Converter
EL150CA-20 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EL150CB-20 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EL150CA-40 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EL150CB-40 Managed 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
EL150 SeriesManaged 10/100BASE-TX to 100BASE-FX Media Converter
Diagrams Unit: mm
Front Top Side
20
121.
8
80
Back
150149
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Technology
Standards IEEE802.3u 100BASE-FX
Forward and Filtering Rate
148,810pps for 100Mbps
Environment
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A
Power
Input Input Voltage: 12VDC
Power Consumption
2.76W Max. 0.23A @ 12VDC
Mechanical
Casing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.30" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or expansion use with EMC1600 media
converter chassis system
Interface
Ethernet Port 100BASE-FX: 2 ports
LED Indicators Per Unit: Power Status (Power), Link
Specifications
Value Supports chassis system installation for easy management
and power redundancy Fiber to fiber transmission and conversion, offers the flexibility
of transmission distance extension and/or conversion between MM and SM fiber cable
Features Full wire-speed forwarding rate
Packed with 12VDC external universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
packed with 12VDC external universal PSU
Aluminum case
Supports Wall Mounting installation or expansion use with
EMC1600 media converter chassis system
Ordering InformationEM120MCC-15 100BASE-FX Multi Mode (SC) to 100BASE-FX Single Mode (SC) - 15Km Media Converter
EM120MTC-15 100BASE-FX Multi Mode (ST) to 100BASE-FX Single Mode (SC) - 15Km Media Converter
EM120MCC-40 100BASE-FX Multi Mode (SC) to 100BASE-FX Single Mode (SC) - 40Km Media Converter
EM120MTC-40 100BASE-FX Multi Mode (ST) to 100BASE-FX Single Mode (SC) - 40Km Media Converter
EM120MCT-20 100BASE-FX Multi Mode (SC) to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EM120MTT-20 100BASE-FX Multi Mode (ST) to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EM120MCCA-20 100BASE-BX Multi Mode (SC) to 100BASE-FX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EM120MCCB-20 100BASE-BX Multi Mode (SC) to 100BASE-FX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EM120MTCA-20 100BASE-BX Multi Mode (ST) to 100BASE-FX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EM120MTCB-20 100BASE-BX Multi Mode (ST) to 100BASE-FX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
NOTES :
*Single Mode to Single Mode version converters are also available
*EMC1600, proprietary 19" chassis system, can house up to 16xEM120 Series Converters
*EMC1600 Chassis System is available separately
*More 100FX fiber options are also available upon request
EM120 Series100BASE-FX Multi-Mode/Single-Mode to 100BASE-FX Single-Mode Media Converter
80.323.8
Back
109.
2
Diagrams Unit: mm
Front Top Side
152151
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Top Side
Specifications
Value Supports chassis system installation for easy management
and power redundancy accomplishment Flexible dip-switch for Ethernet connection configuration
Features 768K bits buffer memory
DIP switch configuration for "Link-Fault-Pass-Through", speed,
duplex mode 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Packed with 12VDC external universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Aluminum case
Supports Wall Mounting installation or use with EMC1600 media
converter chassis system
Ordering InformationEL100C 10/100BASE-TX to 100BASE-FX Multi Mode (SC) Media Converter
EL100T 10/100BASE-TX to 100BASE-FX Multi Mode (ST) Media Converter
EL100C-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20Km Media Converter
EL100T-20 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EL100C-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40Km Media Converter
EL110C 100BASE-TX to 100BASE-FX Multi Mode (SC) Media Converter
EL110T 100BASE-TX to 100BASE-FX Multi Mode (ST) Media Converter
EL110C-20 100BASE-TX to 100BASE-FX Single Mode (SC) - 20Km Media Converter
EL110T-20 100BASE-TX to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EL110C-40 100BASE-TX to 100BASE-FX Single Mode (SC) - 40Km Media Converter
NOTES :
*EMC1600, proprietary 19" chassis system, can house up to 16xEL100/EL110 Series Converters
*EMC1600 Chassis System is available separately
*More 100FX fiber options are also available upon request
EL100 Series10/100BASE-TX to 100BASE-FX Media Converter Technology
Standards IEEE802.3 10BASE-T,
IEEE802.3u 100BASETX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x Full-duplex
flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL60950-1
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
1.92W Max. 0.16A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.30" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or use with EMC1600 media converter
chassis system
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,
Speed
100FX: Link/Activity, Full-duplex/Collision
TX TXFDX/COLRX 100
10/100LNK/ACT100BASE-FX PWR
DC12V
80.3
23.8
109.
2mm
Back
109.
2
154153
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Specifications
Value Provides WDM fiber interface to save the cabling cost, only
single cable required for deploying the Ethernet application
Flexible dip-switch for Ethernet connection configuration
Features Supports Multi Mode and Single Mode WDM fiber optical
connection DIP switch configuration for "Link-Fault-Pass-Through" speed,
duplex mode 768K bits buffer memory 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate Packed with 12VDC external universal PSU 0°C to 45°C (32°F to 113°F) operating temperature range Aluminum case Supports Wall Mounting installation or expansion use with EMC1600 media converter chassis system
Ordering InformationEL200CA-2 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km Media Converter
EL200CB-2 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km Media Converter
EL200CA-5 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km Media Converter
EL200CB-5 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km Media Converter
EL200CA-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EL200CB-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EL200CA-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EL200CB-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
EL210CA-2 100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km Media Converter
EL210CB-2 100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km Media Converter
EL210CA-5 100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km Media Converter
EL210CB-5 100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km Media Converter
EL210CA-20 100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EL210CB-20 100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EL210CA-40 100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EL210CB-40 100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
NOTES :
*EMC1600, proprietary 19" chassis system, can house up to 16xEL200/EL210 Series Converters
*EMC1600 Chassis System is available separately
*More 100FX fiber options are also available upon request
EL200 Series10/100BASE-TX to 100BASE-BX WDM Media Converter Technology
Standards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x Full-duplex
flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL60950-1
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
PowerInput Input Voltage: 12VDC
Power Consumption
1.92W Max. 0.16A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80.3mm (W) x 109.2mm (D) x 23.8mm (H)
(3.16" (W) x 4.30" (D) x 0.94" (H))
Weight 150g (0.33lb.)
Installation Wall Mounting or use with EMC1600 media converter
chassis system
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,
Speed
100FX: Link/Activity, Full-duplex/Collision
Diagrams Unit: mm
Front Top Side
DC12V
100BASE-BX
80.3
23.8
109.
2
Back
156155
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Specifications
Value Extreme compact size for space constrained application
Features Supports Link-Fault-Pass-Through
768K bits buffer memory
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Packed with 12VDC external PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Metal case
Ordering InformationEL50T 10/100BASE-TX to 100BASE-FX Multi Mode (ST) Media Converter
EL50C 10/100BASE-TX to 100BASE-FX Multi Mode (SC) Media Converter
EL50T-20 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EL50C-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20Km Media Converter
EL50C-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40Km Media Converter
EL50CA-2 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km Media Converter
EL50CB-2 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km Media Converter
EL50CA-5 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km Media Converter
EL50CB-5 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km Media Converter
EL50CA-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EL50CB-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EL50CA-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EL50CB-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
NOTES :
*More 100FX fiber options are also available upon request
EL50 SeriesMini-Sized 10/100BASE-TX to 100BASE-FX Media Converter Technology
Standards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward Environment
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A VCCI Class A
Power
Input Input Voltage: 12VDC
Power Consumption
1.92W Max. 0.16A @ 12VDC
Mechanical
Casing Metal case
Dimensions 54.2mm (W) x 80.3mm (D) x 21.9mm (H)
(2.13" (W) x 3.16" (D) x 0.86" (H))
Weight 140g (0.31lb.)
Installation Desktop
Interface
Ethernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators Per Port: 10/100TX: Link/Activity
100FX: Link/Activity
Diagrams Unit: mm
Back Top Side
1 A
DC 5V
LNK/AC
T
LNK/AC
T
TRANSMIT
TX
FX RECEIVE
54.2mm
80.3
mm
21.9mm
Front
21.9
80.3
54.2
158157
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Technology
Standards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
49K bits
Environment
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class B FCC Part 15 Class B VCCI Class A
Power
Input 1W Max.
Mechanical
Dimensions 120mm (L) x 56mm (W)
(4.72" (L) x 2.2" (W))
Weight 90g (0.2lb.)
Interface
LED Indicators Per Unit: Link/Activity, Speed
Specifications
Value Supports Multi-types of fiber connectors and modes Mounted in the PCI slot of a PC, workstation, or server without
driver installation and configuration
Features Two queues per port for QoS purpose
Supports packet length up to 1536 Bytes
Complies with PCI 2.1 specification
Built-in data buffer 49K Bytes
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Supports Multi-types of fiber connectors and modes: Multi-mode
SC, ST, VF-45, MT-RJ, and LC; Single-mode SC and ST; WDM
Single-mode SC
Ordering InformationEN303C 10/100BASE-TX to 100BASE-FX Multi Mode (SC) Media Converter
EN303T 10/100BASE-TX to 100BASE-FX Multi Mode (ST) Media Converter
EN303C-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20Km Media Converter
EN303T-20 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20Km Media Converter
EN303C-40 10/100BASE-TX to 100BASE-FX Multi Mode (SC) - 40Km Media Converter
EN303CA-2 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km Media Converter
EN303CB-2 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km Media Converter
EN303CA-5 10/100BASE-TX to 100BASE-BX Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km Media Converter
EN303CB-5 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km Media Converter
EN303CA-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EN303CB-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EN303CA-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EN303CB-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
EN303 Series32bit PCI-Bus 10/100BASE-TX to 100BASE-FX Media Converter
Diagrams Unit: mm
120.
6
122.15
89.6
160159
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Back Top Side
Environment
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 90% (non-condensing)
Regulatory Approvals
ISO Manufactured in an ISO9001 facility
Safety UL60950-1
Emission Compliance
CE Mark Class A FCC Part 15 Class A
Power
Input 100 - 240VAC, 50 - 60Hz Internal Universal PSU
+ / - 48VDC
Power Consumption
73.2W Max.
Mechanical
Casing Metal case
Dimensions 440mm (W) x 276mm (D) x 90mm (H)
(17.32" (W) x 10.87" (D) x 3.54" (H))
Standard 19" rack-mount size, two-unit-height
Weight 6.8Kg (14.96lbs.)
Installation Rack Mounting
Interface
LED Indicators Per Unit: Power Status (Power)
Specifications
Value Redundant power supplies with Ideal Central Point, powered
up to 16 Media Converters and Ethernet Extenders The chassis system is capable of hot-swap installation of
Media Converters, Ethernet Extenders and redundant power supply
Features House up to sixteen Media Converters (EM1100/EM2100,
EM1000/EM2000, EM1000S/EM2000S, EM120, EL100/EL200,
and EL110/EL210 series) and Ethernet Extenders (ED3101 and
ED3331)
Non-stop operation and minimal downtime
Hot-swappable: Media Converters, Ethernet Extenders and
redundant power supply modules
Redundant 100 - 240VAC 50 - 60Hz Internal Universal PSU or
48VDC Power inputs
Power redundancy: The other redundant power supply module
is capable of taking over immediately if one of the power supply
modules fails
Load sharing: Two internal power supply modules provided for
load sharing purposes
Power isolation: Media Converter and Ethernet Extender bay
power isolation ensures each bay is electrically isolated from each
other
Over current protection: Fuse on PCBA for each Media Converter
and Ethernet Extender bay and power supply module
0°C to 45°C (32°F to 113°F) operating temperature range
Metal case, standard 19" rack-mount size, two-unit-height
Supports Rack Mounting installation
Ordering InformationEMC1600 16-Bay Media Converter and Ethernet Extender Chassis, includes 2 AC Power Supplies (EMC1600-RPSA)
EMC1600-RPSA Redundant AC Power Supply (84W) for EMC1600
EMC1600-RPSA2 Redundant AC Power Supply (130W) for EMC1600
EMC1600-RPSD Redundant DC 48V Power Supply (65W) for EMC1600
NOTES :* The optional Media Converter and Ethernet Extender series for EMC1600 are to be separately ordered by customers' choice
* The following is the list of the Media Converter series:
EM1100/EM2100, EM1000/EM2000, EM1000S/EM2000S, EM1020, EM120, EL100/EL200, EL110/EL210, EL2315 series
* The following is the list of the Ethernet Extender series:
ED3101 and ED3331
EMC1600 Series16-Bay Media Converter and Ethernet Extender Chassis
90
440
276
162161
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Front Top Side
TechnologyStandards EM1100, EM2100: IEEE802.3 10BASE-T, IEEE802.3u
100BASE-TX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x EM1000, EM2000: IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x EM1000S, EM2000S: IEEE802.3z 1000BASE-SX/1000BASE-LX EM120: IEEE802.3u 100BASE-FX EL100, EL200: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x EL110, EL210: IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
EM1100, EM2100: 14,880pps for 10Mbps, 148,810pps for 100Mbps, 1,488,100pps for 1000Mbps EM1000, EM2000: 1,488,100pps for 1000Mbps EM1000S, EM2000S: 1,488,100pps for 1000Mbps EL100, EL200: 14,880pps for 10Mbps, 148,810pps for 100Mbps EL110, EL210: 148,810pps for 100Mbps EM120: 148,810pps for 100Mbps
Packet Buffer Memory
EM1100, EM2100: 2M bits EL100, EL200: 768K bits EL110, EL210: 768K bits
Processing Type
EM1100, EM2100: Store-and-Forward, Half-duplex back-pressure and IEEE802.3x Full-duplex flow control EL100, EL200: Store-and-Forward, Half-duplex back-pressure and IEEE802.3x Full-duplex flow control EL110, EL210: Store-and-Forward, Half-duplex back-pressure and IEEE802.3x Full-duplex flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 90% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A
PowerInput 100 - 240VAC, 50 - 60Hz Internal Universal PSU
+ / -48VDC
Power Consumption
55.2W Max.
MechanicalCasing Metal case
Dimensions 440mm (W) x 243mm (D) x 45mm (H)(17.32" (W) x 9.57" (D) x 1.77" (H)) Standard 19" rack-mount size, one-unit-height
Weight 3.1Kg (6.82lbs.)
Installation Rack Mounting
InterfaceInstallation EM1100, EM2100:
Per Unit: Power Status (Power)Per Port: 10/100/1000TX: Link/Activity, Speed, Full-duplex/Collision1000SX/LX: Link/Activity EM1000, EM2000:Per Unit: Power Status (Power), Full-duplex/Collision, Transmit, ReceivePer Port: 10/100/1000TX, 1000SX/LX: Link EM1000S, EM2000S:Per Unit: Power Status (Power)Per Port: 1000SX/LX: Link EL100, EL200:Per Unit: Power Status (Power)Per Port: 10/100TX: Link/Activity, Full-duplex/Collision, Speed100FX: Link/Activity, Full-duplex/Collision EL110, EL210:Per Unit: Power Status (Power), Link, Activity EM120:Per Unit: Power Status (Power), Link
Specifications
Value Offers the advantages of a variety of Ethernet media converter
transmission combinations and improves the utilization of cabinet space
Features Non-stop operation and minimal downtime Hot-swappable: redundant power supply modules Redundant 100 - 240VAC, 50 - 60Hz Internal Universal PSU,
48VDC power inputs with load sharing redundancy so there are no power outages if one power supply fails.
House up to twelve Media Converters (EM1100/EM2100, EM1000/EM2000, EM1000S/EM2000S, EM120, EL100/EL200, and EL110/EL210 series)
Power isolation: Media Converter bay power isolation ensures each bay is electrically isolated from each other
Over current protection: Fuse on PCBA for each Media Converter bay and power supply module
0°C to 45°C (32°F to 113°F) operating temperature range Metal case, standard 19" rack-mount size, one-unit-height
Supports Rack Mounting installation
Ordering InformationEMC1200RC 12-Bay EL100C Media Converter SystemEMC1200RT 12-Bay EL100T Media Converter SystemEMC1200RL 12-Bay EL100L Media Converter SystemEMC1210RC 12-Bay EL110C Media Converter SystemEMC1210RT 12-Bay EL110T Media Converter SystemEMC1210RL 12-Bay EL110L Media Converter SystemEMC1220RCC-15 12-Bay EM120MCC-15 Media Converter SystemEMC1220RTC-15 12-Bay EM120MTC-15 Media Converter SystemEMC1220RLC-15 12-Bay EM120MLC-15 Media Converter System
NOTES :* ST fiber also available in Single Mode, 20Km
* SC fiber also available in Single Mode, 20/40/75/100/120Km
* SC fiber also available in WDM Type A and Type B, Single Mode 20/40Km, and Multi Mode 2/5Km
EMC1200RTSC 12-Bay EM1000TSC Media Converter SystemEMC1200RTLC-10 12-Bay EM1000TLC-10 Media Converter SystemEMC1200RTLC-20 12-Bay EM1000TLC-20 Media Converter SystemEMC1200RTLC-50 12-Bay EM1000TLC-50 Media Converter SystemEMC1210RTSC 12-Bay EM1100TSC Media Converter SystemEMC1210RTLC-10 12-Bay EM1100TLC-10 Media Converter SystemEMC1210RTLC-20 12-Bay EM1100TLC-20 Media Converter SystemEMC1210RTLC-50 12-Bay EM1100TLC-50 Media Converter SystemEMC1200RSLC-10 12-Bay EM1000SLC-10 Media Converter SystemEMC1200RSLC-20 12-Bay EM1000SLC-20 Media Converter SystemEMC1200RSLC-50 12-Bay EM1000SLC-50 Media Converter SystemEMC1200RLLC-10 12-Bay EM1000LLC-10 Media Converter SystemEMC1200RLLC-20 12-Bay EM1000LLC-20 Media Converter SystemEMC1200RLLC-50 12-Bay EM1000LLC-50 Media Converter System
NOTES :* SC fiber also available in WDM Type A and Type B, Single Mode 10/20Km, and Multi Mode 2/5Km
EMC1200R Series12-Bay Media Converter System
440
243
45
Back
164163
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Value Redundant power input design prevent unexpected electricity
interruptions Provides AC 100-240 Internal Universal PSU or -48VDC
power input for different applications May stack up to 4 1U chassis in one integrated system for a
total of 64 media converters
Features Each EMMC800M Managed Converter Chassis provides eight
media converter slots Up to four EMMC800M chassis may be stacked 0°C to 45°C (32°F to 113°F) operating temperature range Metal case, standard 19" rack-mount, one-unit-height Hot-swappable in any slot when used with EMM100W Media
Converter Chassis Manager or EMM100CO Media Converter (CO) EMM100CP Media Converter (CPE) connects to the EMM100CO and EMM100W
EMM100W - the Chassis Manager supports Chassis Hardware Monitor, CO MC Status monitor and control, CPE MC Auto Report, CPE MC Control, Loopback Test, MC Hardware Monitor
Alarm Configuration, Hardware Alarm Configuration, Alarm Email Trap, Alarm SNMP-Trap
TFTP Client for Software Upgrade Telnet, SNMP V1 & V2, Web Browser, and TFTP Management EMM100CO - Chassis type media converter, managed by
EMM100W EMM100CP - Stand alone CPE media converter, managed by
EMM100W All media converters with full wire-speed forwarding rate All media converter with Aluminum case
Features Each EMMC800M Managed Converter Chassis provides eight
media converter slots
Up to four EMMC800M chassis may be stacked
0°C to 45°C (32°F to 113°F) operating temperature range
Metal case, standard 19" rack-mount, one-unit-height
Alarm Configuration, Hardware Alarm Configuration, Alarm Mail-
Trap, Alarm SNMP-Trap
TFTP Client for Software Upgrade
Telnet, SNMP V1 & V2, Web Browser, and TFTP Management
EMM100CO - Chassis type media converter, managed by
EMM100W
Diagrams Unit: mm
Top Side Back
EMMC800M Series8-Bay Managed Media Converter Chassis System
EMM100W10/100BASE-TX to 100BASE-FX Media Converter and Chassis Manager
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL60950-1
Emission Compliance
CE Mark Class A, FCC Part 15 Class A
PowerInput 100 - 240VAC, 50 - 60Hz Internal Universal PSU
Power Consumption
32W Max. (with 1 EMM100W + 7 EMM100CO)
MechanicalCasing Metal case
Dimensions 440mm (W) x 235mm (D) x 44mm (H)(17.32" (W) x 9.25" (D) x 1.73" (H)) Standard 19" rack-mount size, one-unit-height
Weight 3Kg (6.6lbs.)
Installation Rack Mounting
InterfaceLED Indicators Per Unit: Power Status (Power), Fan Status, Stack Port
Status
Specifications
Specifications
FD/CLLK/ATLK/AT CONSOLE
PW/FA
FD/CL
PW/FA
LK/ATLK/AT LK/AT LK/AT
PW/FA
LK/AT LK/AT
FD/CL
FD/CL
PW/FA
LK/AT
LK/ATLK/AT
LK/AT
PW/FA
FD/CL
FD/CL
PW/FA PW/FA
PW/FA
LK/AT
LK/AT
FD/CLLK/AT
FD/CLLK/AT
440
235 44
Front
TechnologyStandards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-
TX/100BASE-FX, IEEE802.3x
Protocols SNMP V1/V2, TFTP RFC 783, IP RFC 791, ICMP RFC
792, TCP RFC 793, SMTP RFC 821, Telnet RFC 854,
HTTP RFC 2068
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
128K bits
Built-in CPU with 2M Bytes Flash & 8M Bytes SDRAM
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A, FCC Part 15 Class A
PowerInput Input Voltage: 12VDC
Power Consumption
4.2W Max. 0.35A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80mm (W) x 124mm (D) x 20mm (H)
(3.15" (W) x 4.88" (D) x 0.79" (H))
Weight 160g (0.35lb.)
Installation Expansion use with EMMC800M Managed Media Converter
Chassis
InterfaceEthernet Port 10/100BASE-TX: 1 port
100BASE-FX: 1 port
Console Port Port: One RJ45 Ethernet port
LED Indicators Per Unit: Power Status (Power)
Per Unit: Power Status (Power, Failure Alarm)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision
100FX: Link/Activity
Console: Activity, Full-duplex/Collision
166165
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
EMM100CO10/100BASE-TX to 100BASE-FX Media Converter (CO)
EMM100CP10/100BASE-TX to 100BASE-FX Media Converter (CPE)
Features Each EMMC800M Managed Converter Chassis provides eight
media converter slots Up to four EMMC800M chassis may be stacked 0°C to 45°C (32°F to 113°F) operating temperature range Metal case, standard 19" rack-mount, one-unit-height
Alarm Configuration, Hardware Alarm Configuration, Alarm Email Trap, Alarm SNMP-Trap
TFTP Client for Software Upgrade Telnet, SNMP V1 & V2, Web Browser, and TFTP Management EMM100CO - Chassis type media converter, managed by
EMM100W
Features Each EMMC800M Managed Converter Chassis provides eight
media converter slots Up to four EMMC800M chassis may be stacked 0°C to 45°C (32°F to 113°F) operating temperature range Metal case, standard 19" rack-mount, one-unit-height
Alarm Configuration, Hardware Alarm Configuration, Alarm Email Trap, Alarm SNMP-Trap
TFTP Client for Software Upgrade Telnet, SNMP V1 & V2, Web Browser, and TFTP Management EMM100CO - Chassis type media converter, managed by
EMM100W
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Safety UL60950-1
Emission Compliance
CE Mark Class A FCC Part 15 Class A
PowerInput Input Voltage: 12VDC
Power Consumption
3W Max. 0.25A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80mm (W) x 124mm (D) x 20mm (H)(3.15" (W) x 4.88" (D) x 0.79" (H))
Weight 160g (0.35lb.)
Installation Installed in the EMMC800M Managed Media Converter Chassis
InterfaceLED Indicators Per Unit: Power Status (Power, Failure Alarm)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision100FX: Link/Activity
SpecificationsTechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps 148,810pps for 100Mbps
Packet Buffer Memory
128K bits Built-in CPU with 2M Bytes Flash & 8M Bytes SDRAM
Processing Type
Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control
SpecificationsTechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
128K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A
PowerInput Input Voltage: 12VDC
Power Consumption
3W Max. 0.25A @ 12VDC
MechanicalCasing Aluminum case
Dimensions 80mm (W) x 124mm (D) x 20mm (H)
(3.15" (W) x 4.88" (D) x 0.79" (H))
Weight 160g (0.35lb.)
Installation Desktop
InterfaceLED Indicators Per Unit: Power Status (Power, Failure Alarm)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision
Console: Activity, Full-duplex/Collision
100FX: Link/Activity
Ordering InformationEMM100W Media Converter Chassis Manager
EMM100WC 10/100BASE-TX to 100BASE-FX Multi Mode (SC)EMM100WT 10/100BASE-TX to 100BASE-FX Multi Mode (ST)EMM100WC-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20KmEMM100WC-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40KmEMM100WC-75 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 75KmEMM100WT-20 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20KmEMM100WCA-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20KmEMM100WCB-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20KmEMM100WCA-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40KmEMM100WCB-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
EMM100W Media Converter Chassis Manager
EMM100COC 10/100BASE-TX to 100BASE-FX Multi Mode (SC)EMM100COT 10/100BASE-TX to 100BASE-FX Multi Mode (ST)EMM100COC-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20KmEMM100COC-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40KmEMM100COC-75 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 75KmEMM100COT-20 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20KmEMM100COCA-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20KmEMM100COCB-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20KmEMM100COCA-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40KmEMM100COCB-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
EMM100CP Media Converter (CPE)
EMM100CPC 10/100BASE-TX to 100BASE-FX Multi Mode (SC)EMM100CPT 10/100BASE-TX to 100BASE-FX Multi Mode (ST)EMM100CPC-20 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 20KmEMM100CPC-40 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 40KmEMM100CPC-75 10/100BASE-TX to 100BASE-FX Single Mode (SC) - 75KmEMM100CPT-20 10/100BASE-TX to 100BASE-FX Single Mode (ST) - 20KmEMM100CPCA-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20KmEMM100CPCB-20 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20KmEMM100CPCA-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40KmEMM100CPCB-40 10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km
168167
Media Converters2011 Master Catalog
Acc
esso
ries
Seria
l Dev
ice S
erve
rsE
ther
net E
xten
ders
Med
ia C
onve
rters
Eth
erne
t Sw
itche
s
02
www.etherwan.com
Diagrams Unit: mm
Back Top Side
TechnologyStandards IEEE802.3 10BASE-T,
IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
1M bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
Address Table Size
2048 MAC addresses
Latency Less than 5µs
EnvironmentOperating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory ApprovalsISO Manufactured in an ISO9001 facility
Emission Compliance
CE Mark Class A FCC Part 15 Class A
PowerInput Input Voltage:12VDC
Power Consumption
3.24W Max. 0.27A @ 12VDC
MechanicalCasing Metal case
Dimensions 160mm (W) x 80.5mm (D) x 28mm (H)
(6.3" (W) x 3.17" (D) x 1.1" (H))
Weight 0.42Kg (0.92lbs.)
Installation Wall, Shelf Mounting
InterfaceEthernet Port 10/100BASE-TX: 4 ports
100BASE-FX: 1 port
LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100TX, 100FX: Link/Activity
Specifications
Value Multi-port ast Ethernet Media Converter to meet fiber
networking applications 12VDC External Universal PSU 10/100Mbps-Full/Half-duplex, Auto-Negotiation,
Auto-MDI/MDIX
Features 2048 MAC addresses
1M bits buffer memory
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
12VDC External Universal PSU
0°C to 45°C (32°F to 113°F) operating temperature range
Metal case
Supports Wall or Shelf installation
Ordering InformationEX1605PBFT 4-port 10/100BASE-TX + 1-port 100BASE-FX Multi Mode (ST) - 2Km Media Converter
EX1605PBFC 4-port 10/100BASE-TX + 1-port 100BASE-FX Multi Mode (SC) - 2Km Media Converter
EX1605PBFT-20 4-port 10/100BASE-TX + 1-port 100BASE-FX Single Mode (ST) - 20Km Media Converter
EX1605PBFC-15 4-port 10/100BASE-TX + 1-port 100BASE-FX Single Mode (SC) - 15Km Media Converter
EX1605PBFC-40 4-port 10/100BASE-TX + 1-port 100BASE-FX Single Mode (SC) - 40Km Media Converter
EX1605PBFCA-20 4-port 10/100BASE-TX + 1-port 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Media Converter
EX1605PBFCB-20 4-port 10/100BASE-TX + 1-port 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km Media Converter
EX1605PBFCA-40 4-port 10/100BASE-TX + 1-port 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km Media Converter
EX1605PBFCB-40 4-port 10/100BASE-TX + 1-port 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km Media Converter
EX1605PBF1 Series5-port 10/100BASE Media Converter
7 6 5 4 3 2 1FX
POWER LNK/ACT
108F
EtherWAN
600mA
DC12V
1 2 3 4 5 6 7
TX RX
FX
160
80.5
Front
28