8/12/2019 1036100000_WDU_16N_en

1/4

Data sheet

Creation date February 18, 2014 1:48:40 PM CET

Catalogue status 15.11.2013 / We reserve the right to make technical changes. 1

W-SeriesWDU 16N

Weidmller Interface GmbH & Co. KGKlingenbergstrae 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.com

General ordering data

Type WDU 16N

Order No. 1036100000

Version W-Series, Feed-through terminal, Rated cross-section: 16 mm, Screw connection, Directmounting, Beige

GTIN (EAN) 4008190273217

Qty. 50 pc(s).

The versatile and extensive range of products - from 0.05mm to 300 mm - means that you have diverse optionsfor your applications at your disposal.

Hardened steel for mechanical strength and high-qualitytinned copper for optimum conductivity. All materialscomply with RoHS requirements and have been tested tocurrent environment guidelines.

http://catalog.weidmueller.com/catalog/Start.do?localeId=en_DE&ObjectID=1036100000

8/12/2019 1036100000_WDU_16N_en

2/4

Data sheet

W-SeriesWDU 16N

Weidmller Interface GmbH & Co. KGKlingenbergstrae 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comTechnical data

Creation date February 18, 2014 1:48:40 PM CET

Catalogue status 15.11.2013 / We reserve the right to make technical changes. 2

Dimensions and weights Length 60 mm Width 12 mmHeight 46.5 mm Height of lowest version 47 mmWeight 24.85 g Net weight 24.08 g

Temperatures Operating temperature Storage temperatureContinuous operating temp., min. -50 C Continuous operating temp., max. 120 C

2 clampable wires (H05V/H07V) same cross-section (rated connection)

Wire connection cross section, finelystranded, two clampable wires, min. 1.5 mm

Wire cross-section, finely stranded, twoclampable wires, max. 4 mm

Wire connection cross section, finelystranded with wire-end ferrules DIN46228/1, 2 clampable wires, min. 1.5 mm

Wire connection cross section, finelystranded with wire-end ferrules DIN46228/1, 2 clampable wires, max. 4 mm

Additional technical data Explosion-tested version No Installation advice Direct mountingNumber of similar terminals 1 Open sides closedType of mounting

Snap-on

Version Screw connection,for screwable cross-connection

CSA ratings data Certificate No. (CSA) 200039-1057876 Voltage size C (CSA) 300 VVoltage size D (CSA) 600 V Current size C (CSA) 70 ACurrent size D (CSA) 5 A Wire cross section max. (CSA) 6 AWGWire cross section min. (CSA) 14 AWG

Clampable wires (rated connection) Type of connection Screw connection Stripping length 12 mmBlade size 1.0 x 5.5 mm Connection direction on sideNumber of connections 2 Clamping range, rated connection, min. 1.5 mmClamping range, rated connection, max. 25 mm Clamping screw M 4Tightening torque, min. 1.2 Nm Tightening torque, max. 2.4 NmTorque level with DMS electricscrewdriver 4

Gauge to IEC 60947-1B7

Wire connection cross section, solidcore, max. rated connection 1.5 mm

Wire connection cross section, solidcore max. rated connection 16 mm

Wire connection cross section, stranded,rated connection, min. 1.5 mm

Wire connection cross section, stranded,rated connection, max. 25 mm

Wire connection cross section, finelystranded, max. 16 mm

Wire connection cross-section, finelystranded, min. 1.5 mm

Wire connection cross section, finelystranded with wire-end ferrules DIN46228/1, rated connection, min. 1.5 mm

Wire connection cross section, finelystranded with wire-end ferrules DIN46228/1, rated connection, max. 16 mm

Cross-section for connected conductor,finely stranded with wire-end ferrulesand plastic collars DIN 46228/4, ratedconnection, min. 1.5 mm

Wire connection cross-section, finelystranded with wire-end ferrules andplastic collars DIN 46228/4, ratedconnection, max. 16 mm

Wire connection cross section AWG,min. AWG 14

Wire connection cross section AWG,max. AWG 6

8/12/2019 1036100000_WDU_16N_en

3/4

8/12/2019 1036100000_WDU_16N_en

4/4

Data sheet

W-SeriesWDU 16N

Weidmller Interface GmbH & Co. KGKlingenbergstrae 16D-32758 DetmoldGermanyFon: +49 5231 14-0Fax: +49 5231 14-292083www.weidmueller.comDrawings

Creation date February 18, 2014 1:48:40 PM CET

Catalogue status 15.11.2013 / We reserve the right to make technical changes. 4