#14000Mounting plate yellow#14004Mounting plate light grey#14006Mounting plate white#14007Mounting plate blue

#10000Symmetry ARTEX#10001Symmetry BALANCE#10002Symmetry DENAR#10003Symmetry DENTATUS#10004Symmetry KAVO Protar#10005Symmetry PANADENT#10007Symmetry SAM#10008Symmetry STRATOS#10015Symmetrie SAM = ARTEX

System components:

adesso-split plate set adesso-split centering keyPatented DP 4104 356

#10025Symmetry ARTEX / STRATOS#10026Symmetry BALANCE#10027Symmetry DENAR#10029Symmetry DENTATUS#10030Symmetry KAVO Protar#10031Symmetry PANADENT#10033Symmetry SAM

adesso-split Artist articulator

adesso-split adjusting glue#11000Adjusting glue

adesso-split mounting platesType A (with metal screw)

#12100Symmetry ARTEX incl. adesso-split system#12200Symmetry SAM incl. adesso-split system

adesso-split adhering discs(35 mm x 1,5 mmm)

#10028Steel - nickel coated#11010Stainless steel

#14100Mounting plate yellow#14200Mounting plate blue#14300Mounting plate white#14400Mounting plate green#14500Mounting plate red#14600Mounting plate light blue

adesso-split mounting platesType B (use with adhering disc)

adesso-split matrix

adesso-split maintenance spray

#10040Matrix (Single version)

#10028Silicon- / Seperate spray

#10041Milling plate #10042Milling table (90° swivelling)

adesso-split milling plate

#14920Mounting plate light grey#14930Mounting plate silver

#11008Template holder

adesso-split template holder

adesso-split Mounting articulator

#12300Artist articulator (measure 116 mm)incl. adesso-split system

No movement simulator, however, thereal articulators are spared. Thus, thevaluable movement simulators are nolonger exposed to water, wet plaster,dust and dirt. A fixed hinge axis and aone-part incisal pin without verticaladjustment will guarantee a fixed cen-tric. The quick magnet-take-off deviceof the upper member of the articulator(maxilla) will guarantee a precise con-trol-function of your split-cast.

The Artist is a straightforwardfunctioning yet high quality “ave-rage value articulator”. The Artistwas designed for the demandingand multiple tasks encountereddaily in dental laboratories. Thepractice-orientated constructionis also shown by the centric quicklock for optimum handling.

Baumann Dental GmbHFrankenstr. 25

75210 Keltern-EllmendingenGermany

Telefon ++49-(0)7236-980700Telefax ++49-(0)7236-980798E-Mail: mail @baumann-dental.dehttp://www.baumann-dental.de

The systemto calibrate

multiple articulatorsto identical and highlyprecise specification.

This can now be achieved easily withthe adesso-split-system.

adesso-split-systemcan help you finetune your

articulators of the same makeand

- through the application ofappropriate kits -

even calibrate articulatorsof different makes and types.

#10170_Baumann_adesso_uk.qxd 07.10.2003 17:47 Uhr Seite 1

To understand the application of the adesso-split-system, you should go over and familiarize your-self with the system’s components.

The articulator is exactly adjusted with the paten-ded centering key and the adesso-split-system wit-hin the µ-range among each other articulator.

Screw the maxillary base plate into the top posi-ton of your articulator and check for precise fit.

Check the patended splitcalibration key for correctand precise assembly. Thescrew has to be tightened.Turn the articulator upsidedown.

The key’s unique designallows for only one specificposition thus making thecalibration process easyand error-free.

Components:screw retained base plate(TOP) - maxillarycement-retained base platemandiblemagnetic plate

Two different mounting plates will be used thruog-hout the process. Adjust your articulator to thestandard settings.

Place the calibration key onto the maxillary baseplate inside the articulator.

35° Codylar inclination10° – 15° Benett angleIncisal guidance pin set on zero position

Outline the dimension ofthe articulator’s lower por-tion on the mandibularbaseplate to avoid excessi-ve application of cementlater on.

Open the adjustingcement. Thoroughly mixthe cement on a mixingpad - application time usu-ally is around 5 mins.

Place the cementable baseplate upside down ontothe calibration key.

Dry-pratice the articulatorclosure to insure properalignment of retaining pinsand grooves and interfe-rence-free handling.

Clean all surfaces for the cementation - these haveto be free of contamination - especially oily residuecould prohibit proper cementation.

Specific brands (SAM = ARTEX) might requireslight modification and adjustment of those retai-ning pins. Do not hesitate to contact us.

Apply cement to the baseof your articulator and thebase plate - slightlyoverfilling the retaininggrooves and notches.

Close the articulator care-fully and make sure that itis closed on the zero posi-tion.

After removing the calibration key - your first arti-culator is now ready for use. Repeat this processfor the remaining articulators.

Allow the cement to cure for least 45-60 minutes,then carefully remove the calibration key.

Once finished your articulators are now absolutelyidentical regarding the position of mounted model-work - this being totally interchangeable betweenthe calibrated articulators.Use the calibration key to check your articulatorsfrequently and regularly for accuracy.

Checking and ensuring the correct incisal guidan-ce pin’s position on the incisal guide plate.

Remove any excesscement with an oily fluidand a Q-tip within the appli-cation time.

To check your articulator,remove the screw of thepatended centering keyand remove the 2 pinsinside the key.

Replace the two halvesinto your articulator tocheck the calibration.

#10170_Baumann_adesso_uk.qxd 07.10.2003 17:47 Uhr Seite 2