10.15 scope of accreditation...

Accreditation Procedures

GAC

10.15 Scope of Accreditation

Issue No: 1/ Issue Date: 01.April.2018

Accreditation Manager: Hamza Khan

ACCREDITED

CALIBRATION ISO/IEC 17025:2005

No. ACL 0007

Version: 1.0 of 23

Date: 15th March 2018

Approved by: Atta Subhan

Calibration Laboratory Accreditation No. ACL 0007

is accredited by the GCC Accreditation Center (GAC) in accordance with the recognized International Standard ISO/IEC 17025:2005, “General requirements for the competence of testing and calibration laboratories”

Arabcal Icon Technical Solutions WLL- Laboratory

Issue No: 1 Issue Date: 01.April.2018

Address.

Arabcal Icon Technical Solutions WLL,

Furoziya Street, Building number 8, near horse race course round about, Doha, Qatar

Contact: Mr. Eby Joy Tel: +97444168827 Fax: +97444019777

Email: [email protected]

Web Address: www.arabcal.com

Locations where calibration activities covered by the above Accreditation Standard are undertaken

1- address: Furoziya Street, Building number 8, near horse race course round about, Doha, Qatar

For the following scope:


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



Scope:

Guidance for Assessment Team on preparation of scope Here, please follow AC 10.7 chose the main calibration Category and sub-scope (red-liners in AC 10.7), below is an example:

1. Calibration 1.38 Instrument calibrators .01 D.C. voltage .02 A.C. voltage .11 D.C. current .12 A.C. current .51 Resistance

1.39 Indicating and recording instruments .01 D.C. voltmeters .02 A.C. voltmeters .03 D.C. ammeters .04 A.C. ammeters .09 Ohmmeters .10 LCR meters (Excluding Inductance) .30 Insulation resistance test equipment 1.41 Frequency and time measuring instruments and standards .01 Frequency meters


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



Scope details are as follows: Calibration field 1: (Electrical)

Measurand / Equipment Measuring Range CMC (k=2) Method (standard/guide + internal

procedure)

Permanent lab (P)

/ Client-site (S) *

Temperature Indicators- Thermocouple (mV Simulation)- Type K

(-140 to 1340) °C 0.25°C

Euramet cg-11, Version 2.0

Permanent Lab. (P)

Type J (400 to 750) °C 0.10°C

Type T (-250 to 400) °C 1.0°C

Type S (-50 to 1700)°C 1.0°C

Type N (-257 to 1300) °C 1.0°C

Type E (0 to 800)°C 0.20°C Permanent Lab. (P)


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



Temperature Indicators-RTD – simulation

(-200 to -80) ⁰C / RTD-100 Ω 0.10 ⁰C

> (-80 to 100) ⁰C / RTD-100 Ω 0.14 ⁰C

> (100 to 800) ⁰C / RTD- 100 Ω 0.46 ⁰C

(-200 to -80) ⁰C / RTD-200Ω 0.08 ⁰C

> (-80 to 100) ⁰C / RTD-200 Ω 0.08 ⁰C

> (100 to 630) ⁰C / RTD-200 Ω 0.32 ⁰C

(-200 to 100) ⁰C / RTD- 500 Ω 0.10 ⁰C

> (100 to 630) ⁰C / RTD-500 Ω 0.22 ⁰C

(-200 to 100) ⁰C / RTD-1000 Ω 0.08 ⁰C

> (100 to 630) ⁰C / RTD-1000 Ω 0.46 ⁰C

Euramet cg-11, Version 2.0

(-80 to 100) ⁰C / RTD-120 Ω 0.16 ⁰C


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



> (100 to 260) ⁰C / RTD-120 Ω 0.28 ⁰C

(-100 to 260) ⁰C / RTD-10 Ω 0.60 ⁰C

DC Voltage 0.001 V to 330 mV 35 10-6 U +4.3 µV

Internal procedure CI/01/M1;

Based on Euramet cg-15

Calibration of Meter >0.33 V to 3.3 V 34 10-6 U + 7.7 µV

U=measured value >3.3 V to 33 V 28 10-6 U + 67 µV

>33 V to 330 V 34 10-6 U + 0.65 mV

>100 V to 1020 V 35 10-6 U + 5.1 mV

Permanent Lab. (P)

AC Voltage 0.001 V to 330 mV

Calibration of Meters 10 Hz to 45 Hz 2.3 10-3U + 59 µV

U=measured value >45 Hz to 1 kHz 0.38 10-3U + 49 µV

>1 kHz to 20 kHz 0.92 10-3U + 75 µV


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>0.33 V to 3.3 V

10 Hz to 45 Hz 2.3 10-3U + 0.44 mV

>45 Hz to 999 kHz 0.42 10-3U + 0.23 mV

>1 kHz to 20 kHz 0.96 10-3U + 0.35 mV

>20 kHz to 50 kHz 2.9 10-3U + 2.3 mV

>3.3 V to 33 V

Permanent Lab. (P)

10 Hz to 45 Hz 2.3 10-3U +3.9 mV

>45 Hz to 2 kHz 0.36 10-3U +2.3 mV

>1 kHz to 20 kHz 0.72 10-3U + 3.7 mV

>33 V to 330 V


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



30 Hz to 45 Hz 0.66 10-3U + 31 mV

>45 Hz to 1 kHz 0.41 10-3U + 22 mV

>1 kHz to 19.999 kHz 1.0 10-3U + 58 mV

>100 V to 1020 V

30 Hz to 45 Hz 0.67 10-3U + 0.26 V

>45 Hz to 1 kHz 0.39. 10-3U + 0.20 V

>1 kHz to 10 kHz 1.7 10-3U + 0.49 V

Permanent Lab. (P)

Calibration of Meters >0.0 mA to 3.3 mA 89 10-6U + 55 nA

U=measured value >3.3 mA to 33 mA 53 10-6U + 0.49 µA

>33 mA to 330 mA 92 10-6U + 3.5 µA

>0 A to 2.2 A 0.15 10-3U + 91 µA

>2.2 A to 11 A 0.45 10-3U + 0.50 mA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



DC Current(using current coil)

20 A to 100 A 6.8 10-3I + 0.20 A

Calibration of Meters

U=measured value >100 A to 500 A

6.8 10-3U + 0.70 A

AC Current 2.5 µA to 200 µA

Calibration of Meters 10 Hz to 45 Hz 2.3 10-3U + 0.29 µA

U=measured value >45 Hz to 1 kHz 0.80 10-3U + 0.29 µA

Permanent Lab. (P)

>1 kHz tp 10 kHz 0.78 10-3U + 0.38 µA

0.03mA to 0.33 mA

10 Hz to 45 Hz 2.3 10-3U + 0.66 µA

>45 Hz to 1 kHz 0.65 10-3U + 0.59 µA

>1 kHz tp 10 kHz 0.54 10-3U + 2.0 µA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



> 0.33mA to 3.3 mA

10 Hz to 45 Hz 2.3 10-3U + 6.6 µA

>45 Hz to 1 kHz 0.65 10-3U + 6.6 µA

>1 kHz to 10 kHz 5.5 10-3U + 5.9 µA

> 3.3mA to 33 mA

10 Hz to 45 Hz 2.3 10-3U + 66 µA

>45 Hz to 1 kHz 0.65 10-3U + 59 µA

Permanent Lab. (P)

>1 kHz to 10 kHz 6.6 10-3U + 0.15 mA

> 0.033 A to 2.2 A

10 Hz to 45 Hz 2.3 10-3U + 0.70 mA

>45 Hz to 1 kHz 0.98 10-3U + 0.64 mA

>1 kHz to 5 kHz 6.6 10-3U + 1.5 mA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



> 2.2A to 11 A

30 Hz to 45 Hz 2.3 10-3U + 7 mA

>45 Hz to 100 Hz 0.88 10-3U + 4.9 mA

>100 Hz to 1 kHz 3.4 10-3U + 5.8 mA

AC Current(using coil) >20 A to 100 A

Calibration of Meters 30 Hz to 60 Hz 6.8 10-3U + 0.20 A

Permanent Lab. (P)

U=measured value >100 A to 500 A

30 Hz to 60 Hz 6.8 10-3U + 0.70 A

Resistance-2wire 0.2 Ω 5.0 mΩ

Calibration of Meters 1 Ω 5.0 mΩ

10 Ω 7.0 mΩ

100 Ω 11 mΩ


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



1 kΩ 0.10 Ω

10 kΩ 0.90 Ω

100 kΩ 9.0 Ω

1 MΩ 0.10 kΩ

10 MΩ 4.5 kΩ

100 MΩ 0.60 MΩ

Permanent Lab. (P)

Resistance 4-wire 0.1 Ω 0.10 mΩ

Calibration of Meters 10 Ω 6.0 mΩ

100 Ω 12 mΩ

1 kΩ 0.10 Ω

10 kΩ 0.90 Ω

100 kΩ 9.0 Ω


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



Capacitance @ 1kHz 1 nF 6.0 pF

10 nF 40 pF

20 nF 0.10 nF

50 nF 0.20 nF

100 nF 0.30 nF

Permanent Lab. (P)

1 uF 10 nF

10 uF 0.10 µF

100 uF 0.72 µF

1 mF 0.01 mF

Frequency 1 Hz to 100 Hz 2.0 10-6f+ 18 µHz

>100 Hz to 1 k Hz 2.0 10-6f+ 90 µHz

>1 kHz to 10 kHz 2.0 10-6f+ 0.90

mHz


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>10 kHz to 20 kHz 2.0 10-6f+ 0.60

mHz

>20 kHz to 50 kHz 2.0 10-6f+ 1.7 mHz

>50 kHz to 100 kHz 2.0 10-6f+ 30 mHz

>100 kHz to 1 MHz 2.0 10-6f+ 91 mHz

Insulation Resistance 10 kΩ 10 Ω

SANAS Guideline TG-02-01;

Internal procedure CI/01/I2 Permanent Lab. (P)

100 kΩ 0.10 kΩ

1 MΩ 1.0 kΩ

5 MΩ 10 kΩ

10 MΩ 0.13 MΩ

50 MΩ 0.59 MΩ

100 MΩ 1.2 MΩ

400 MΩ 5.6 MΩ


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



1 GΩ 10 MΩ

2 GΩ 50 MΩ

4 GΩ 0.24 GΩ

10 GΩ 0.58 GΩ

Direct Method using Electrical test calibrator

Permanent Lab. (P)

100 GΩ 5.7 GΩ

RCD Trip Current 10 mA @ 50 Hz 0.22 mA

30 mA @ 50 Hz 0.51 mA

90 mA @ 50 Hz 1.3 mA

100 mA @ 50 Hz 1.5 mA

110 mA @ 50 Hz 1.6 mA

150 mA @ 50 Hz 2.8 mA

300 mA @ 50 Hz 4.9 mA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



400 mA @ 50 Hz 6.3 mA

500 mA @ 50 Hz 7.7 mA

1000 mA @ 50 Hz 15 mA

2000 mA @ 50 Hz 29 mA

Permanent Lab. (P)

RCD Trip Time 20 ms 0.69 ms

40 ms 0.69 ms

200 ms 0.69 ms

390 ms 8.0 ms

Electrical-Measurement

DC Voltage 0.001 V to 0.1 V 21 10-6U +2.6 µV

Comparison using 6.5 Digit DMM- CI/01/EC1 Internal procedure

Calibration of Calibrators >0.1 V to 1 V 10 10-6U + 6.5 µV

U=measured value >1 V to 10 V 10 10-6U + 38 µV


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>10 V to 100 V 25 10-6U + 0.74 µV

>100 V to 1000 V 25 10-6U + 2.6 mV

AC Voltage 0.001 V to 0.1 V

Permanent Lab. (P)

Calibration of Calibrators 20 Hz to 50 Hz 2.9 10-3U + 4.8 µV

U=measured value >50 Hz to 100 Hz 0.76 10-3U + 11 µV

>100 Hz to 2 kHz 0.16 10-3U + 18 µV

>2 kHz to 10 kHz 0.16 10-3U + 18 µV

>10 kHz to 30 kHz 0.16 10-3U + 38 µV

>30 kHz to 100 kHz 3.2 10-3U + 55 µV

>0.1 V to 1 V

20 Hz to 50 Hz 2.9 10-3U + 27 µV

>50 Hz to 100 Hz 0.79 10-3U + 23 µV


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>100 Hz to 2 kHz 0.21 10-3U + 54 µV

>2 kHz to 10 kHz 0.21 10-3U + 54 µV

>10 kHz to 30 kHz 0.25 10-3U + 0.10 mV

Permanent Lab. (P)

>30 kHz to 100 kHz 3.5 10-3U + 41 µV

>1 V to 10 V

20 Hz to 50 Hz 2.9 10-3U + 0.27 mV

>50 Hz to 100 Hz 0.80 10-3U + 0.21 mV

>100 Hz to 2 kHz 0.33 10-3U + 0.41 mV

>2 kHz to 10 kHz 0.45 10-3U + 0.33 mV

>10 kHz to 30 kHz 0.55 10-3U + 0.72 mV

>30 kHz to 100 kHz 3.5 10-3U + 0.31 mV

>10 V to 100 V


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



20 Hz to 50 Hz 2.9 10-3U + 2.7 mV

>50 Hz to 100 Hz 0.80 10-3U + 2.9 mV

Permanent Lab. (P)

>100 Hz to 2 kHz 0.56 10-3U + 3.7 mV

>2 kHz to 10 kHz 0.45 10-3U + 4.4 mV

>10 kHz to 30 kHz 0.55 10-3U + 8.1 mV

>100 V to 750 V

20 Hz to 50 Hz 2.9 10-3U + 4.5 mV

>50 Hz to 100 Hz 1.1 10-3U + 11 mV

>100 Hz to 2 kHz 0.53 10-3U + 47 mV

>2 kHz to 10 kHz 0.51 10-3U + 0.21 V

DC Current 0.000 µA to 200 µA 0.40 10-3U + 0.04 µA

Calibration of Calibrators >0.2 mA to 2 mA 0.40 10-3U + 0.05 µA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



U=measured value >2 mA to 10 mA 0.40 10-3U + 0.43 µA

>10 mA to 100 mA 0.43 10-3U + 4.4 µA

Permanent Lab. (P)

>0.1 A to 3 A 0.86 10-3U + 63 µA

AC Current 0.2 µA to 100 µA

Calibration of Calibrators 20 Hz to 50 Hz 4.0 10-3U + 4.6 nA

U=measured value >50 Hz to 200 Hz 2.3 10-3U + 7.8 nA

>200 Hz to 1 kHz 4.6 10-3U + 4.1 nA

>1 kHz to 5 kHz 5.2 10-3U + 0.15 µA

>0.1 mA to 1 mA

20 Hz to 50 Hz 4.0 10-3U + 4.6 nA

>50 Hz to 200 Hz 2.3 10-3U + 7.8 nA

>200 Hz to 1 kHz 4.6 10-3U + 4.1 nA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>1 kHz to 5 kHz 5.2 10-3U + 0.15 µA

Permanent Lab. (P)

>1 mA to 10 mA

20 Hz to 50 Hz 3.5 10-3U + 44 nA

>50 Hz to 200 Hz 1.7 10-3U + 82 nA

>200 Hz to 1 kHz 1.3 10-3U + 98 nA

>1 kHz to 5 kHz 1.4 10-3U + 60 µA

>10 mA to 100 mA

20 Hz to 50 Hz 3.5 10-3U + 0.44 µA

>50 Hz to 200 Hz 1.7 10-3U + 0.82 µA

>200 Hz to 1 kHz 1.3 10-3U + 0.98 µA

>1 kHz to 5 kHz 1.4 10-3U + 0.53 µA


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>0.1 A to 3 A

20 Hz to 50 Hz 3.5 10-3U + 4.1 mA

Permanent Lab. (P)

>50 Hz to 200 Hz 1.7 10-3U + 7.6 mA

>200 Hz to 1 kHz 1.4 10-3U + 9.1 mA

>1 kHz to 5 kHz 1.4 10-3U + 2.6 mA

Resistance 0.1 Ω to 10 Ω 16 10-6U + 0.25

mΩ

Calibration of Calibrators, Decade resistance Box, Capacitance, Inductance box

>10 Ω to 100 Ω 19 10-6U + 1.2 mΩ

U=measured value >100 Ω to 1 kΩ 8.4 10-6U + 6.4 mΩ

>1 kΩ to 10 kΩ 8.4 10-6U + 64 mΩ


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



>10 kΩ to 100 kΩ 39 10-6U + 0.60 Ω

>100 kΩ to 1 MΩ 72 10-6U + 30 Ω

Permanent Lab. (P)

>1 MΩ to 10 MΩ 0.29 10-3U + 98 Ω

>10 MΩ to 100 MΩ 0.63 10-3U + 4.0 kΩ

Frequency @1 Hz 0.35 10-3 f + 0.16

µHz

Calibration of Calibrators, >1 Hz to 10 Hz 0.35 10-3 f + 1.6

µHz

f =measured value >10 Hz to 100 Hz 0.35 10-3 f + 19

µHz

>100 Hz to 1 kHz 0.35 10-3 f + 0.16

mHz

>1 kHz to 10 kHz 0.35 10-3 f + 1.6

mHz

>10 kHz to 100 kHz 0.35 10-3 f + 20

mHz

>100 kHz to 300 kHz

0.35 10-3 f + 20 mHz


GAC




ACCREDITED


No. ACL 0007

Version: 1.0 of 23



DC Voltage (Using Voltage Divider)

0 V to 1000 V 0.10 10-3U + 24

mV

Calibration of Calibrators >1000 V to 5000 V 0.24 10-3U

AC Voltage(Using Voltage Divider)

0 to 1000 V 1.0 10-3U + 0.20 V

Calibration of Calibrators >1000 V to 5000 V 1.0 10-3U + 0.20 V

Note: the text in blue indicates the new scope OR update in the Edition of a test method in this issue of the scope of accreditation. *: Put only ‘P’, ‘S’ or ‘P and S’

END

This conformity assessment body (CAB) is recorded as issuing GAC accredited certificates to organizations in the countries listed below. This list is current at the time of issue of this schedule.

United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen

10.15 scope of accreditation...

Documents