100g alien wavelength
TRANSCRIPT
Cisco Confidential © 2010 Cisco and/or its affiliates. All rights reserved. 1
100G Alien Wavelength
Cassio Gomes
System Engineer Sales – SP
March, 2013
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2
• Definition • Hardware • Installation • Connections • Configuration • Testers Tool Kit
© 2009 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID 3
Definition
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 4
Alien Wavelength is the way to connect a DWDM interface from any external element to a third party Optical Network, existing or new, leveraging only the common parts of the DWDM network, ie the photonic layer. The two most common scenarios are:
• an external transponder from vendor A connects to the photonic layer of vendor B. Example: 100Gbps Transponder from Cisco connects to any DWDM from another vendor.
• an external interface, for instance from a router or switch, from vendor A connects to the photonic layer from vendor B. Example: CRS-3 IPoDWDM interface connects to any DWDM system from another vendor.
CRS-3 ASR9000
CRS-3 ASR9000 Optical Network
© 2009 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID 5
Hardware
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 6
• The following slides details the hardware requirements considering the following use cases:
Cisco’s 100Gbps Transponder will be an Alien Wavelength to another vendor’s DWDM system.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 7
High integration HW Control Plane
MSTP Line card Backward Compatibility
Cooling and Power >> 150W / slot
1450W total M6 (30A @ 48V)
Both ANSI & ETSI compliant
Both AC & DC Power Options
>50% Footprint Reduction
High speed Back Panel 12.5Gb/s rails
High bandwidth/throughput 80Gb/s line card to Switch fabric
11.02” Depth
10.45” Height or
6 RU
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 8
15454-M6-SA= w/door
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 9
15454-M6-SA= door open
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10
15454-M6-AC= 15454-M6-LCD= 15454-M6-DC=
15454-M6-FTA2= 15454-M6-ECU=
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 11
• Same unit supporting 3 working modes (SW Configurable): – 100G TXP or IPoWDM Interface (CXP as standard 100GE SR10 / OTU4 Client) – Trunk Line Card – coupled with a Client card to perform Muxponder functionality (no CXP
pluggable needed) – Trunk Line Card – coupled with another Trunk Line card to perform Regeneration functionality
(no CXP pluggable needed) • High performance ITU-T Trunk interface - Full C Band Tunable OTU-4 Trunk with 50GHz stability • PM as defined by the OTN standards • Equipped with 1x DWDM Port and 1x CXP interface to provide a 100G Pluggable Client as well as a
cost optimized connection with CRS/ASR/Nexus – 100G DWDM Trunk supports
EFEC for optimized DWDM Performances
– CXP allows up to 100m “low cost” connection solution towards external 100GE BASE SR10 Interface Client
• 150W Maximum Power consumption
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12
• Multiplexes 10Gbps channels in a 100Gbps channel.
• Supports the following client interfaces: OC-192/STM-64 (9.95328 Gbps) 10 Gigabit Ethernet LAN PHY (10.3125 Gbps) 10-Gbps Fibre Channel (10.518 Gbps) 8-Gbps Fibre Channel OTU-2
• Connects via backplane to the 100Gbps line card.
• Can also be used as a 5x 10Gbps Transponder.
15454-M-10X10G-LC=
Line Card Block Diagram
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13
• Same unit supporting 2 working modes (SW Configurable): • 10-ports 10G Multi-Rate Muxponder – coupled with 100G DWDM
Line card Able to support any combination of 10G signals (SONET/SDH, 10GE, 10G FC and 8G FC)
• 5x 10G Transponder – Standalone configuration with DWDM SFP+, supporting FEC/E-FEC (no CXP pluggable needed) Can be configured to support Low Latency 10G Transport for SAN / High-Speed Trading
• 150W Max Power consumption
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14
• Same unit supporting 2 working modes (SW Configurable): • 100G CFP based Transponder – Coupled with 100G DWDM Line card – One card can be
coupled with 2 independent 100G DWDM card • 2-port 40G CFP Muxponder – coupled with 100G DWDM Line card
• CFP-based Line card • 100GE Base-LR4 / OTU-4 10Km • 40GE Base-LR4 / OTU-3 10Km • 40GE Base-FR / OTU-3 2Km
• 70W Max Power Consumption
• Requires new FTA2 fan for full shelf capacity
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
100G DWDM Trunk Line Card
M2 with 2x 100G DWDM Trunk
10x 10G Multi-Rate Line Card
2x CFP Line Card M6 with 6x 100G DWDM Trunk
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
• 1x100GBE • Supports FP140 or MSC140
• 150W Max Power consumption • Connects directly to the 100Gbps transponder
using SR10 optics. • If LR4 optics is required, needs to connect to a
CFP line card in the M6 chassis. Cisco CFP-100G-SR10
Cisco 1X100GBE
© 2009 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID 17
Installation
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18
Use kit 53-3333-01 Bracket PN: 700-28080-01
install the two brackets (1) using the screw (2) included in the acc. Kit Brackets can be installed in the front position (3) or in the middle position (4)
1
1
2
3 4
Brackets in front position
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
Un-tighten the 2 nuts (1) using Mx tube driver, install GND cable lug (2), tighten the 2 nuts (1), connect the other cable end to the rack. GND lug provided in the acc.kit.
6 7
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
Check the position of the mechanical locking system on the rear of the chassis before to insert the power module, the screw (1) must be close to the AC silkscreen text if the customer needs to use AC power supply. Otherwise un-tight the screw and move to the left position then tight the screw again. NB: Mixed configuration AC and DC is not allowed.
1
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21
Insert AC power module in slot A or B. Plug completely the module in the chassis. Lock the power module in the chassis tighten the screw (1)
1
A B
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
Ac power air filter can be removed for cleaning purpose. Snap-in system guarantee the air filter position.
1
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
Insert the 2 power modules (1) into the chassis, in case the customer needs only 1 power module fill the free space with the power filler module (2)
1 2
To lock the module tighten the captive screw (3) using #2 Phillips screwdriver Align and insert the AC power cable, for side A use left cable (4), for side B use right cable (5)
3
4 5
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
To lock the cables, rotate the retention feature (6) Module A power cable exit to left, Module B power cable exit to right
4 5
6 open close
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
Check the position of the mechanical locking system on the rear of the chassis before to insert the power module, the screw (1) must be close to the DC silkscreen text if the customer needs to use DC power supply. Otherwise un-tight the screw and move to the right position then tight the screw again. NB: Mixed configuration AC and DC is not allowed.
1
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26
Insert DC power module in slot A or B. Plug completely the module in the chassis. Lock the power module in the chassis tighten the screw (1)
1
A B
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 27
Insert the 2 power modules (1) into the chassis, in case the customer needs only 1 power module fill the free space with the power filler module (2)
1 2
To lock the module tighten the captive screw (3) using #2 Phillips screwdriver Remove the terminal block protective covers (4)
3
4
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 28
Un-tighten the 4 nuts (5), both modules and insert the power lugs (6): top cable for RET, bottom cable for -48V Use Mx tube screw driver for the nuts Power wires are not provided.
Mount the 4 nuts to lock the cable
5
6
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
Mount the 2 terminal block covers (4) Module A power wires exit to left, Module B power wires exit to right
4
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
Insert the 2 power modules (1) into the chassis, in case the customer needs only 1 power module fill the free space with the power filler module (2)
1 2
To lock the module tighten the captive screw (3) using #2 Phillips screwdriver Remove the D-sub power connector protective covers (4) un-tighten the 2 screws (5), both sides
3
4
5
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 31
Align and insert the DC ETSI power cables, for side A use left cable 15454-M6-DCCBL-LE= (6), for side B use right cable 15454-M6-DCCBL-RE= (7)
6
7
To lock the cables, tighten the 2 screws (8), both sides using medium slot-head screwdriver Module A power cable exit to left, Module B power cable exit to right
8
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 32
To remove the chassis air filter, move to left the retention feature (1), extract the air filter, clean or replace it, insert the air filter, move to right the retention feature (1). NB: the air filter must be inserted with the grid face oriented as shown (2).
1
2
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
Chassis is shipped with Fiber management feature installed as shown in figure (1). 1
Customer can replace the Fiber management feature with Cable management feature in case he need to manage CAT5 cables instead of optical fiber. To remove the fiber feature, un-tight the screws (2). Remove also the air filter locking feature (3) to use with the cable feature.
3
2
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 34
Line card with top exit
Line card with bot exit
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
4
Install the Cable management feature (4) using the same screws (2) and attach the slot label identify (5); insert the air filter locking feature (3).
2
5
3
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 36
Insert the ECU unit (1) in the chassis, center the PCA in the mechanical guide placed in the central slot (2). Engage completely the back plane connector until the face plate is aligned with the edge of the side wall of the chassis (3).
1
Tight the two screws (4). In order to extract the ECU unit un-tight the screws (4) and rotate on the external direction the two ejectors (5).
2
3
4
5
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 37
Wire wrap cover
Cables of this area exit to right Cables of this area exit to left
To lock the cables for a cleaning routing, fix them using tie-wrap provided in the acc kit in the cut-out available on the ECU ejectors (1), both sides
6
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
Insert the Fan Tray unit (1) in the dedicated slot into the chassis (2). Engage completely the back plane connector. Tight the two screws (3) to lock the unit.
1
3 2
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 39
Insert the LCB unit (1) in the dedicated central slot between power slots into the chassis (2). Engage completely the back plane connector. Tight the screws (3) to lock the unit.
1
2
3
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
TNC or TSC control card
Only MSTP line cards are compatible with M6 and M2 chassis
New line cards with high speed back plane connectors
New Uplink card
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 41
• The 100G Line Cards are compatible with both M2 and M6 chassis (not M12) • The 100G DWDM Trunk Card and the 10x10G Multi-Rate Line Card fit in any slots
from #2 to #7 (M6) or #2 and #3 (M2) • The 2x CFP Line Card fits in M6 slot #3 or #5. The DWDM Trunk Line Cards must
be in the adjacent slots (#2 and #5 or #4 and #7) • The communications among 100G Line Cards is through the chassis backplane • On M6 the backplane communications is between slots 2-3, 4-5, 6-7
100G
100G
100G
TSC
Power supply LCD / memory Power supply
ECU
Fan Tray
Cab
le g
uide
Air
filte
r
TSC
CFP CFP
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
Port Data Rate 100G Trunk 10x 10G Card OTU-4 CXP SR10 (100m) -
100GE CXP SR10 (100m) -
OTU-2 / OTU-2e -
SFP+ P1I1-2D1 SFP+ 1S1-2D2bF SFP+ 1L1-2D2F SFP+ DWDM (100GHz)
10GE -
SFP+ SR SFP+ LR SFP+ ER SFP+ ZR SFP+ DWDM (100GHz)
OC-192 -
SFP+ SR1 SFP+ IR2 SFP+ LR2 SFP+ DWDM (100GHz)
10G FC / FICON - SFP+ 1200-SM-LL-L SFP+ 1200-MX-SN-I
8G FC / FICON - SFP+ 800-SN-LC-L SFP+ 800-MX-SN-I
SFP+
CXP
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 43
• 100GBASE-SR10 Expensive fiber – ribbon cables, MPO connectors Cheap transceivers – 850 nm VCSEL technology
• 100GBASE-LR4 Cheap fiber – standard singlemode duplex cables Expensive transceivers – 1310nm lasers, plus WDM mux/demux
Client Handoffs, Cost Comparison
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 44
40G and 100G 40GBASE- SR4 40GBASE-LR4 100GBASE-SR10 100GBASE-LR4 100GBASE-ER4
CFP CXP
100G 100GBASE-CR10 100GBASE-SR10
© 2009 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID 45
Connections
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
CRS-3/16S
CFP Transceiver
CRS 100GE PLIM
ONS 15454-M6
100G TRUNK
100G CXP MPO Fiber
Note: This scenario is currently supported only for 100Gbps SR10 optics.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 47
CRS-3/16S
CFP Transceiver
CRS 100GE PLIM
ONS 15454-M6
100G TRUNK
100G CFP
Note: This scenario is supported for both for 100Gbps SR10 and LR4 optics.
LC Fiber (Duplex)
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 48
LC Fiber
ONS 15454-M6
100G TRUNK
LC Fiber 10x10G Card
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 49
ONS 15454-M6
100G TRUNK LC/PC
MUX
DEMUX
TX
RX
MUX/DEMUX Connector must be identified during the Site-Survey
NON CISCO
© 2009 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID 50
Configuration
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 51
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 52
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 53
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 54
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 55
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 56
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 57
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 58
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 59
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 60
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 61
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 62
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 63
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 64
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 65
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 66
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 67
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 68
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 69
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 70
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 71
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 72
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 73
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 74
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 75
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 76
Select appropriate wavelength to match the channel available in the DWDM system or the port of the Mux/Demux or ROADM port the interface is connected to.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 77
If the 100Gbps channel will be transported adjacent to 10Gbps Channels, use always High-Gain FEC options.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 78
Admin States: IS = In Service OOS,DSBLD = Out-of-Service, Disabled OOS,MT = Out-of-Service, Maintenance. Port is functional, but won’t alarm during maintenance operations that affect it. IS, AINS = In Service, Auto In-Service. Port is in service but will be functional only when a client connects to it.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 79
No configurations needed here. This table is useful to monitor the status of the channel.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 80
In this tab, it’s normal to see Bit Errors counters. However, you should NOT see Uncorrectable words. If you see this counter increasing, the performance of the channel is not guaranteed and the DWDM system needs to be adjusted until this counter is zero.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 81
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 82
Admin States: IS = In Service OOS,DSBLD = Out-of-Service, Disabled OOS,MT = Out-of-Service, Maintenance. Port is functional, but won’t alarm during maintenance operations that affect it. IS, AINS = In Service, Auto In-Service. Port is in service but will be functional only when a client connects to it.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 83
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 84
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 85
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 86
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 87
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 88
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 89
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 90
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 91
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 92
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 93
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 94
DWDM 100G CXP CLIENT INTERFACE
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 95
100G TRUNK DWDM In this tab, it’s normal to see Bit Errors counters. However, you should NOT see Uncorrectable words. If you see this counter increasing, the performance of the channel is not guaranteed and the DWDM system needs to be adjusted until this counter is zero.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 96
100G CXP CLIENT INTERFACE
© 2009 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID 97
Testers Tool Kit
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 98
JDSU MTS 8000 The Optical Spectrum Analyser (OSA) is used to monitor the channels in the DWDM system and identify OSNR and power equalization issues.
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 99
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 100
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 101
Remember: Always clean the fiber before connecting to the DWDM system!
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 102
Remember: Always clean the fiber before connecting to the DWDM system!
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 103
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 104
Thank you.