1.0 introduction to personal computer
DESCRIPTION
TRANSCRIPT
![Page 1: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/1.jpg)
Section 1.2 Introduction to
Personal Computer
Made By : Gagandeep Singh
A+ Hardware
![Page 2: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/2.jpg)
What you learn today
CompTIA A+ 220-701 , Section 1.2Explain the motherboard components, types
and features. - I/O interfaces - Memory Slots - Processor Socket. - Bus Architecture - Bus Slots - Floppy Drives - Hard drives. - BIOS/CMOS/POST
![Page 3: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/3.jpg)
Introduction to Personal ComputerThe outside
- Monitor, Keyboard, Mouse, Computer Case.The inside - Power supply, motherboard, CPU, memory,
cooling fans.Computer operation primer.
![Page 4: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/4.jpg)
The Outside
![Page 5: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/5.jpg)
The Inside
![Page 6: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/6.jpg)
The Inside
![Page 7: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/7.jpg)
SMPS
![Page 8: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/8.jpg)
Motherboard
![Page 9: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/9.jpg)
CPU
![Page 10: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/10.jpg)
LGA VS PGA
![Page 11: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/11.jpg)
Components Socket CPUHeat SinkFAN
![Page 12: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/12.jpg)
Memory (RAM)
![Page 13: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/13.jpg)
System FAN
![Page 14: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/14.jpg)
Floppy Drive
![Page 15: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/15.jpg)
Hard Disk
External Hard Disk
Internal Hard Disk
![Page 16: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/16.jpg)
CMOS /BIOS
![Page 17: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/17.jpg)
OS Booting Sequence Steps
![Page 18: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/18.jpg)
OS Booting Sequence Steps1. First is the POST, this stands for Power On Self Test, for
the computer. The computer power-on self-test (POST) tests the
computer to make sure it meets the necessary system requirements and that all hardware is working properly before starting the remainder of the boot process.
If the computer passes the POST the computer will have a single beep (with some computer BIOS manufacturers it may beep twice) as the computer starts and the computer will continue to start normally. However, if the computer fails the POST, the computer will either not beep at all or will generate a beep code, which tells the user the source of the problem.
![Page 19: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/19.jpg)
The steps of a POST Each time the computer boots up the computer must
past the POST. Below is the common steps a POST performs each time your computer starts.
1. Test the power supply to ensure that it is turned on and that it releases its reset signal.
2. CPU must exit the reset status mode and thereafter be able to execute instructions.
3. BIOS checksum must be valid, meaning that it must be readable.
4. CMOS checksum must be valid, meaning that it must be readable.
![Page 20: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/20.jpg)
The steps of a POSTCPU must be able to read all forms of memory
such as the memory controller, memory bus, and memory module.
6. The first 64KB of memory must be operational and have the capability to be read and written to and from, and capable of containing the POST code.
7. I/O bus / controller must be accessible.8. I/O bus must be able to write / read from the
video subsystem and be able to read all video RAM.
![Page 21: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/21.jpg)
The steps of a POST If the computer does not pass any of the
above tests, your computer will receive an irregular POST. An irregular POST is a beep code that is different from the standard one or two beeps. This could be either no beeps at all or a combination of different beeps indicating what is causing the computer not to past the POST.
![Page 22: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/22.jpg)
Original IBM POST beep codes• 1 short beep - Normal POST - system is OK • 2 short beeps - POST error - error code shown on screen • No beep - Power supply, system board problem,
disconnected CPU, or disconnected speaker, • Continuous beep - Power supply, system board, or keyboard
problem • Repeating short beeps - Power supply or system board
problem or keyboard • 1 long, 1 short beep - System board problem • 1 long, 2 short beeps - Display adapter problem (MDA,
CGA) • 1 long, 3 short beeps - Enhanced Graphics Adapter (EGA) • 3 long beeps - 3270 keyboard card
![Page 23: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/23.jpg)
XP Booting Sequence 2. Once the POST is complete and the BIOS is sure that
everything is working properly, the BIOS will then attempt to read the MBR (Master Boot Record). This is the first sector of the first hard drive (called the Master or HD0). When the MBR takes over it means that Windows is now in control.
3. The MBR looks at the BOOT SECTOR (the first sector of the active partition). That is where NTLDR is located, NTLDR is the BOOT LOADER for Windows XP. NTLDR will allow memory addressing, initiate the file system, read the boot.ini and load the boot menu.
![Page 24: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/24.jpg)
XP Booting Sequence 4. NTLDR has to be in the root of the active partition as do
NTDETECT.COM, BOOT.INI, BOOTSECT.DOS (for multi-OS booting) and NTBOOTDD.SYS (if you have SCSI adapters)Once XP is selected from the Boot Menu, NTLDR will run NTDETECT.COM, BOOT.INI and BOOTSECT.DOS to get the proper OS selected and loaded.
5. The system starts in 16-bit real mode and then moves into 32-bit protected mode. NTLDR will then load NTOSKRNL.EXE and HAL.DLL. Effectively, these two files are windows XP. They must be located in %SystemRoot%System32.
6. NTLDR reads the registry, chooses a hardware profile and authorizes device drivers, in that exact order. At this point NTOSKRNL.EXE takes over. It starts WINLOGON.EXE that in turn starts LSASS.EXE, this is the program that display the Logon screen so that you can logon.
![Page 25: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/25.jpg)
Expansion Slots
![Page 26: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/26.jpg)
RISER CARD
![Page 27: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/27.jpg)
Computer Operation Primer
![Page 28: 1.0 introduction to personal computer](https://reader037.vdocuments.us/reader037/viewer/2022103110/548eb8eab479597e5a8b4629/html5/thumbnails/28.jpg)
IPO Cycle INPUT PROCESS OUTPUT
STORAGE