10 gigabit ethernet cabling

10 Gigabit Ethernet Cabling

― 10G SFP+ Transceiver

What Is 10 Gigabit

10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second (10×109 or 10 billion bits per second). It was first defined by the IEEE 802.3ae-2002 standard.

Why 10 Gigabit Today

• Easy, straightforward migration to higher performance levels without disruption,

• Lower cost of ownership vs. current alternative technologies – including both acquisition and support costs

• Familiar management tools and common skills base

• Ability to support new applications and data types

• Flexibility in network design

• Multiple vendor sourcing and proven interoperability

Applications For 10 Gigabit Ethernet

Dark Fiber Metro Applications

Dark Wavelength Metro Applications with DWDM

10 Gigabit Ethernet WAN Applications

LAN Applications

Dark Wavelength Metro Applications with DWDM

10 Gigabit Ethernet and Fiber Cabling Choices

XENPAK X2

XFP

10GbE transceivers

• the first 10GbE pluggable transceivers on the market to support the 802.3ae standard transmission optics. Presents SC connectors

• the smaller brother of the XENPAK pluggable transceivers, the X2 form factor is about 2/3 the size of the XENPAK. Presents SC connectors

• a 10GbE optics using the same physical form factor as a gigabit SFP. Because of this, many of the small SFP+ based 10GbE switches use 1G/10G ports, giving an added degree of flexibility. Presents LC connectors.

• the newest pluggable transceiver on the market, XFP is the closest in size to the SFP pluggable transceiver now used for gigabit technology.SFP+

SFP+ Transceivers

SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm, 1550nm, CWDM or DWDM wavelengths. The transceivers are ideally suited for datacom and storage area network applications based on the IEEE 802.3ae and Fibre Channel standards.

• Compliant to SFP+ Electrical MSA SFF-8431• Compliant to SFP+ Mechanical MSA SFF-8432• Multi-rate of up to 11.3Gb/s• 10G Ethernet compliance• Transmission distance up to 80km (G.652 SM fiber)• Low power consumption (<1.5W)• 0°C to +70°C case operating temperature range• Laser Class 1 IEC / CDRH compliant• RoHS 6/6 compliant• Compliant with product safety standards

DWDM SFP+ 10G Transceivers

The DWDM SFP+ has a specific tuned laser with a pre-defined “color” which is defined in the DWDM ITU grid. The 100GHz C-Band is the mostly used in the telecom industry. The spacing between the channels is 0.8nm and it’s around 1550nm. The colors or wavelength are named in channels and channel 17 to 61 is commonly used. The 50GHz with 0.4nm spacing and other spectrum bands can be provided by us as well.

DWDM Wavelengths

Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525–1565nm (C band), or 1570–1610nm (L band).

DWDM SFP+ 40km

DWDM SFP+ Transceivers Series

Huge In Stock

• Available in all C-Band Wavelengths on the 100GHz , 50GHz, DWDM ITU Grid

• Temperature-Stabilized DWDM EML Transmitter• Duplex LC Connector• Power Dissipation＜1.5W• Dispersion tolerance from -300ps/nm to 800ps/nm• Hot-Pluggable SFP+ Footprint• Compliant with SFF-8431 MSA• Compliant with SFF-8432 MSA• Operating case temperature standard : 0°C to

+70°C• Built-in Digital Diagnostic Function• Average Output Power:-1~4dBm• Receiver Sensitivity:-15dBm

DWDM SFP+ Transceivers Series

• Available in all C-Band Wavelengths on the 50GHz DWDM ITU Grid

• Temperature-Stabilized DWDM EML Transmitter• Duplex LC Connector• Power Dissipation＜1.5W• Dispersion tolerance from -500ps/nm to 1600ps/nm• Hot-Pluggable SFP+ Footprint• Compliant with SFF-8431 MSA• Compliant with SFF-8432 MSA• Operating case temperature standard : 0°C to

+70°C• Built-in Digital Diagnostic Function• Average Output Power:0~5dBm• Receiver Sensitivity:-23dBm

DWDM SFP+ 80km

Ordering Information

Notes:• XX means DWDM ITU Channel (CH17 = 1563.86nm, CH18 =1563.05nm,

CH19 = 1562.23nm, CH20 = 1561.42nm, etc.)• xx means compatible brand. (For example: CO= Cisco, JU=Juniper,

FD=Foundry, EX=Extreme, NE=Netgear,etc. The two characters are short for compatible brand.)

OEM and ODM

• OEM/ODM order is available

• We can supply DSFP-10GXX-80-xx according to your requirements, and design DSFP-10GXX-80-xx label and packaging for your company. We welcome any inquiry for customized DWDM SFP+ optical transceiver.

Address, phone number and fax number also have listed at www.fiberstore.com. Please e-mail us at [email protected] or call us for assistance.

Fiberstore U.S Fiberstore Hong Kong

1220 Tung Chun Commercial Centre, 438-444 Shanghai Street, Kowloon, HongKongTel: +852 81763606Fax: +852 81763606

Fiberstore China

Eastern Side, Second Floor, Science & Technology Park, No.6, Keyuan Road, Nanshan District, Shenzhen, ChinaTel: +86 (755) 8300 3611Fax: +86 (755) 8326 9395

North America (United States)331 Andover Park East Ste330, Tukwila, WA 98188,United StatesTel: +1-425-226-2035Fax: +1-253-246-7881Email: [email protected]