1 td3 hybrid health check quick start guide. 2 hybrid health check before you start ! 1.you must...

10
1 TOYOTA TOYOTA MOTOR EUROPE TD3 Hybrid Health Check Quick Start Guide

Upload: bartholomew-stevenson

Post on 28-Dec-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

1TOYOTATOYOTA MOTOR EUROPE

TD3 Hybrid Health Check

Quick Start Guide

Page 2: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

2TOYOTATOYOTA MOTOR EUROPE

Hybrid Health Check

Before you start !

1. You must have the correct role. (See Role matrix slide)2. An appropriate vehicle must be connected to TD3 via

GTS diagnostic tool.3. VIN must be validated in TD3 4. TOYOTA Prius 2-3 & plug-in, Auris Hybrid models are

now included5. Lexus Models will be included in the spring of 2013

This quick start guide contains BASIC instructions . It is important to fully familiarise yourself with the test procedures before you start . If you are unsure on any points. Seek assistance!

The Hybrid Health Check (HHC) function in TD3 is Role and Condition based.If the role and condition criteria are not met you will not be able to access the HHC functions.

Page 3: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

3TOYOTATOYOTA MOTOR EUROPE

Roles MatrixProduction: Roles enabled for HHC access

O = EnabledX = Not EnabledR= Read Only

Page 4: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

4TOYOTATOYOTA MOTOR EUROPE

Safety

Before you start !

1. Familiarise yourself fully with the complete HHC procedures before working on a vehicle !

2. Observe safety precautions in the workshop whilst conducting the HHC tests!

3. Pay particular attention to the hybrid battery insulation test. This is a full throttle load test and requires constant attention by the tester!

Page 5: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

Hybrid Health Check (1)

1. Enter and validate VIN

2. Connect to vehicle

3. Open vehicle status check

Page 6: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

Hybrid Health Check (2)

1. Hybrid Health Check reports

2. Hybrid Health Check

Note that the vehicle status check has two new fields.

3. Select Hybrid Health Check to open the HHC.

Page 7: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

Hybrid Health Check (3)

Click the start button to begin.

You May need to wait for the DTC check to complete.

The start button remains black until the DTC check is complete. Then it turns green.

You are now ready to start the HCC.Please follow the instructions carefully for each step.

Page 8: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

Hybrid Health Check

Follow the on-screen instructions for each test.

Page 9: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

Hybrid Health Check benefits

Service Marketing Tools

• Customer retention• Builds confidence in used

vehicles• Upsell potential in test

failure

Workshop• Adds value to hardware

investment.• Not just “a diagnostic tool”• Benefit sales/after sales

Page 10: 1 TD3 Hybrid Health Check Quick Start Guide. 2 Hybrid Health Check Before you start ! 1.You must have the correct role. (See Role matrix slide) 2.An appropriate

End