1 - scherdelversion 7.1 compression springs 17 street: manufacturing adjustment spring ends coiling...
TRANSCRIPT
1Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
2Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
3Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
4Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
5Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
6Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
7Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
8Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
9Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
10Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
11Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
12Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
13Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
14Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
15Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
16Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
Street:
manufacturing adjustment
spring ends
Fig. 1: Spring ends closed and ground
Fig. 2: Spring ends closed
coiling direction admissible deviation
raw material:
surface protection
weight
working temperature
additional requirements
right
No.
irrelevantleft
spring steel wirestainless spring steel wireother
from °C
according to Fig. 1 ends closed and ground
L0
via
n, d n, De, Di, (Dm) L0, n, d, L0, n, De, Di, (Dm)
prescribed parameters:one load with corresponding lengthone load with corresponding length and L0two loads with corresponding lengths
according to EN 15800
Contact:
E-mail:Telefax:
Postal Code, City:Telephone:
Company:
to °C
EN 10270-3-1.4310
Quantity:
ID No.:
Order: Inquiry:
De
DhL0
L2LnLcsh
De, Di, (Dm)L0F1
e1e2
e1e2F1F2FnR
d
mm±
±
N±±
mm±mmmm
mmmmmmmmmmmmmmmmmmNNN
NN
active coils
1 2 3grade
Data Sheet for Compression Springs
==
=============
F2
Save as a new PDF file before sending form via E-mail
Scherdelstr. 2 • 95615 Marktredwitz Tel: +49 9231 603-475 • Fax: +49 9231 603-518
Email: [email protected]
L1
mm±mm=Dmmm±
mm=Dd
EN 10270-1-SH
spring shot peened
outsideinsidenodeburred
according to Fig. 2 ends closed
=n=nt
N/mm
total coils
mm=Di
spring setting(unset springs can be longer than L0)set height Ls =set test springs, other springs not setset all springs
mm
Print Form
17Version 7.1 COMPRESSION SPRINGS www.spring-manual.com
Street:
manufacturing adjustment
spring ends
coiling direction admissible deviation
raw material:
surface protection
weight
working temperature
additional requirements
right
No.
irrelevantleft
spring steel wirestainless spring steel wireother
from °C
according to Fig. 1 ends closed and ground
L0
via
n, d n, Di, DeL0, n, d, L0, n, Di, De
prescribed parameters:one load with corresponding lengthone load with corresponding length and L0
two loads with corresponding lengths
according to EN 15800
Contact:
E-mail:Telefax:
Postal Code, City:Telephone:
Company:
to °C
EN 10270-3-1.4310
Quantity:
ID No.:
Order: Inquiry:
Dmk
L0
L2LnLc
DikDeg
F1
L0
e2
F1F2Fn
d
mm±
±
N±±
mmmm
mmmmmmmmmmN N
N
active coils
1 2 3grade
==
==========
F2
Scherdelstr. 2 • 95615 Marktredwitz Tel: +49 9231 603-475 • Fax: +49 9231 603-518
Email: [email protected]
L1
mm±mm=Dikmm±
mm=Dmg
EN 10270-1-SH
spring shot peened
outsideinsidenodeburred
according to Fig. 2 ends closed
nnt total coils
mm=Deg
spring setting(unset springs can be longer than L0)set height Ls =set test springs, other springs not setset all springs
mm
NN
Data Sheet for Conical SpringsSave as a new PDF file before sending form via E-mail
Fig. 1: Spring ends closed and ground
Fig. 2: Spring ends closed
Print Form