1 rio pocket plc. 2 smart. compact. low cost. lots of i/o. smart – risc processor, memory, pulse...
TRANSCRIPT
2
Smart. Compact. Low Cost. Lots of I/O.Smart. Compact. Low Cost. Lots of I/O.
• Smart – RISC processor, memory, pulse counters, PID process loops, web interface, email capability, PoE, Ethernet, Ladder Interface Software
• Compact – just 3.88” x 4.26” x 1.30”
• Low Cost – only $295 in single quantity
• Lots of I/O – 32 digital I/O & 16 analog I/O
3
Includes Analog I/O and EthernetIncludes Analog I/O and Ethernet
Unlike most PLCs, the RIO provides analog I/O and Ethernet connectivity at no extra cost
4
RIO-471x0 Provides Numerous I/ORIO-471x0 Provides Numerous I/O
• 16 isolated inputs, 5-24 VDC• 8 isolated, sourcing outputs, 12-24 VDC, 500mA• 8 isolated, sinking outputs, 5-24 VDC, 25mA• -47100: 8 analog inputs, 0-5 VDC, 12-bit ADC • -47100: 8 analog outputs, 0-5 VDC, 12-bit DAC• -47120: 8 analog inputs, selectable as +/-10V, +/-5V, 0-5V, 0-10V
12-bit standard, 16-bit optional. Differential or Single-ended.• -47120: 8 analog outputs, selectable as +/-10V, +/-5V, 0-5V, 0-10V
12-bit standard, 16-bit optional
All I/O are self-contained in each RIO unit. Use multiple RIO units to add more I/O.
5
Use ICS boards for PrototypingUse ICS boards for Prototyping
Converts D-type to screw terminals
ICS-48026 for analog I/O ICS-48044 for digital I/O
6
RIO can be Modbus Master or SlaveRIO can be Modbus Master or Slave
RIO can be used as a stand-alone I/O controller, connected to other RIOs or PLCs, or connected
with Galil’s Ethernet motion controllers.
• RIO as Modbus Slave: Another RIO or Galil controller can send and receive info from an RIO
• RIO as Modbus Master: RIO can send information to other I/O devices
7
RIO ProgrammingRIO Programming
RIO can accept:
1. Galil’s standard two-letter commands
2. Code from Galil’s Ladder Interface Software which converts Relay Ladder Logic into two-letter code.
8
Software Tool for Ladder LogicSoftware Tool for Ladder Logic
• Galil provides a software tool that converts a standard Relay Ladder Logic (RLL) program into a Galil program
• Allows user to graphically enter a complex I/O routine into the software, and have that routine run deterministically on the RIO
• Supports functions such as contacts, coils, boxes (timers, counters, operators, etc) and analog I/O
9
What is Relay Ladder Logic?What is Relay Ladder Logic?
• Relay Ladder Logic (RLL) is a standard programming format used primarily for programmable logic controllers (PLC)
• RLL is a graphical programming language to specify I/O logic
10
Ladder Interface SoftwareLadder Interface Software
Galil’s Ladder Interface Software converts a Relay Ladder Logic program into deterministic
code for input into Galil’s RIO I/O Controller
11
Functions SupportedFunctions Supported
• Contacts
• Coils
• Control Relays
• Boxes (timers, counters, data manipulation)
• Mathematical and Logical Operators
• Galil Command box
• Analog I/O
12
ConclusionConclusion
Galil’s RIO is a cost-effective, compact PLC for intelligently handling analog and digital I/O on the Ethernet
More information:www.galilmc.com/pocketplc