1 an introduction for engineering, science and medicine staff to safe laboratory practice presented...
TRANSCRIPT
1
An Introduction for Engineering, Science and Medicine staff to
safe laboratory practice
Presented by Lance Islip
Laboratory Safety Awareness
2
3
Course Outcomes
At the end of this course you will be able to:
• Participate in safe laboratory conduct
• Access safety literature including Australian Standards
• Identify , assess and control risks for plant, equipment and chemicals
• Develop good housekeeping practices
• Select and use appropriate personal protective equipment (PPE)
OHS in your area
What do you know about the OHS systems for:• Access to your lab facilities (or other restricted zones)• Emergencies (evacuation, spills, contamination, fire)• Chemicals• Waste• Protective clothing and equipment• Managing hazards and risks• Plant and Equipment• Training• Purchasing of laboratory supplies or new equipment• What documentation exists for these (Government, UNSW,
School, lab, etc that you know of)
OHS729 Laboratory Review form 4
OHS in your area
What OHS documents should be in a laboratory or workshop:• Register of RA’s and SWP’s• Emergency procedures• Chemicals register• MSDS’s• Plant and Equipment register• Maintenance schedule• Equipment log books for use and maintenance• Training records• Equipment manuals
5
6
1. Always wear appropriate clothing as well as PPE
2. Never adopt a casual attitude
3. Do not store or consume food or drink
4. Keep the laboratory locked
5. Maintain good housekeeping practices, including cleaning up spills and disposing of wastes correctly
6. Look after your visitors
Safe Conduct
7
Selection, use and storage for:• Protective footwear• Protective clothing• Eye protection• Gloves• Respiratory protection• Hearing protection
Supporting UNSW Documentation:• OHS659 Personal Protective Equipment (PPE) Guideline
Personal Protective Equipment
8
The least effective control measure – the hazard still exists.
Protection in the laboratory for:• Eyes• Limb and body• Hearing• Respiratory
PPCE needs to be:• Suitable, properly maintained, meet standards• Provided with training
Personal Protective Equipment
9
• Workers who rely on PPE must understand the functioning, proper use, and limitations of the PPE used.
• Protects only the wearer, and does not protect anyone else.
• Must be assessed on a case by case basis.Wearing PPCE outside the lab?
• Hazard present?
• Public exposed – not protected
• Contamination issues
• Fear in others
Personal Protective Equipment
10
Protective Footwear
How could this happen in a lab/workshop?
11
Step 1: Identify workplace hazards, eg chemicals, slippery floors, falling objects, flying objects, sharp materials, oily surfaces, hot surfaces.
Step 2: Use Australian Standard 2210 Part 1 to select the footwear typeselect the preferred upper and sole material and
sole design
Step 3: Factors to look at include:chemical resistanceslip resistancepenetration resistanceelectrical conductivity propertiesanti-static propertiesheat resistance
Protective Footwear - Selection
12
Protective Footwear - Types
13
• Lab coats are appropriate for minor chemical splashes and spills
• Plastic or rubber aprons are best for corrosive or irritating liquids.
• When cleaning and decontamination of reusable clothing is difficult, disposable outer garments may be useful
• Not to be stored on workbenches, backs of chairs etc
Protective Clothing
14
Personal Protective Equipment
15
Eye Protection
Safety Glasses
•lenses are impact resistant and frames are far stronger
•should have side shields and should be worn whenever there is the possibility of objects striking the eye.
•not appropriate for dusts, powders or liquids
Chemical Splash Goggles•worn when there is potential for splash from a hazardous material•chemical splash goggles should have indirect ventilation•some may be worn over prescription glasses
16
Face Shields
• Use when working with cryogens or large volumes of hazardous materials, for protection from splash to face or flying particles
• Face shields can be used in conjunction with safety glasses or goggles
Contact Lenses
• Contact lenses may be worn in the laboratory
• They do not offer any protection from chemical contact
• If contaminated with a hazardous chemical, rinse the eyes using an eyewash and remove the lens immediately
Storage
• Safety glasses, goggles and Shields should be stored in a drawer/cupboard (i.e. not on bench) to avoid contamination
Eye Protection
17
Asian nose bridge Vs Caucasian bridge
Eye Protection
18
Eye Protection
19
Gloves
20
Gloves should be worn if there is a physical, chemical or temperature hazard
For Chemical Hazards consider the following: • degradation rating • breakthrough time • permeation rate • Compatibility information
For Physical and Temp hazards:• Leather• Fabric• Insulation• Loop pile
Gloves
21
Dexterity – Grip – Size – Length• Consider double gloving, replace outer glove if splashed• Wear tight-fitting glove over loose glove to increase
dexterity• Ribbing, granular finish, felt• Too tight causes fatigue
Inspection – Use – Care – Storage• Inspect before each use, test for pinholes• Wash before removing• Change disposables as soon as contamination occurs• Do not touch other surfaces whilst wearing• Do not store open glove containers near chemicals• Ensure gloves are not stored on top of chemical
containers
Gloves
22
Respiratory Protection Initial Hazard Assessment
This may involve measuring exposure levels.
Respirator Selection •half-face or full-face air purifying respirator, •powered air purifying respirator, supplied air respirator or SCBA•appropriate type of filter or chemical cartridge is selected
Training and Fit-Testing •Qualitative fit-testing using irritant smoke•Positive and negative pressure checks
23
Class P1
Filters particles from inhaled air.
• Must have a correct fit/seal on face.
• Beard/stubble make these ineffective.
Surgical masks
Filters particles from exhaled air
• Fluid resistant to infectious material splash or spatter
• Protects others from your microbes
• No protection from inhaled dusts unless also rated to P1.
Respiratory Protection
24
Respiratory Protection
25
Workers exposed to loud or excessive noise must be provided with hearing protection
Should be:
• compatible with the job
• hygienic
• comfortable
• able to provide audibility of warning noises
•OHS708 Noise Management Procedure
Hearing Protection
Risk Assessment
When do you need to do a risk assessment?
Who needs to write and approve the risk assessment?
Things to remember when writing a risk assessment:
• Specify type of PPE
• Refer to MSDS and Manufacturers Manuals
• Consider hazard types
• Emergency Procedures
• Are all steps of the Activity addressed?
• Additional Controls
• Review timeframes
• Review effectiveness of controlsOHS329 Risk Assessment and Control Procedure
OHS017 Risk Assessment and Control Form
OHS643 Hierarchy of Chemical Risk Controls 26
27
The SWP is a control measure identified in the risk assessment and includes:
• Step by step instructions for undertaking the task safely
• Specific precautions required
• PPCE to be provided and worn
• Emergency shutdown
• Waste disposal
• Authorisation, training and review
• OHS027 Safe Work Procedure Guideline
• OHS026 Safe Work Procedure Form
• OHS701 Personal Protective Equipment signs
Safe Work Procedures
Display them near the equipment. Some people even have a photo of the custodian on it.
28
Safe Work Procedures
29
• Plant safety
• Electrical safety
• Safe Working Procedures
• Gas Cylinders
• Fume Cupboards
Plant Safety
30
Plant includes all machinery and equipment, both stationary and mobile, tools and implements used in the laboratory eg:
• Computers, manual handling equipment, microscopes, freezers, gas cylinders, ladders, drying ovens, autoclaves
Injuries that result from unsafe plant range from minor burns and cuts to traumatic injuries such as broken bones, amputations and death eg:
• hit by moving plant, • caught or crushed in plant, • Cuts and bruises from hand tools, • Strain and overuse injuries from poor posture and operating
positions
Plant Safety
31
Plant Safety
Activity
32
Plant Safety
33
• Only use plant for which you have been trained
• Always use safety devices provided
• Wear appropriate clothing
• Wear the PPE provided
• Read the Safe Working Procedure provided
• Lock out/tag out procedure• Consider safety as a priority in plant design• Purchase plant with safety devices installed• Budget for training of staff and students• Assess competency of staff• Ensure that maintenance can be done safely
Plant Guidelines
34
• Guarding
• Operational controls
• Emergency stops and warning devices
• Mandatory design standards
• Operator competencies
• Registration requirements
• Maintenance and repair
• Dismantling, storage and disposal
• OHS327 Plant and Equipment Procedure
• OHS728 Plant design Guideline
• AS 2243.6 – Safety in Laboratories Plant and equipment aspects
Control Measures for Plant
35
Plant Safety
36
Plant Safety
37
Plant Safety
38
Plant Safety
39
Plant Safety
Working at heights
40
Management and Supervisors are responsible for ensuring that:
•Use of ladders should only be considered if other safer alternatives, such as scaffolding or elevating work platforms, are not reasonably practicable
•Risk Assessments are carried out for activities involving working at heights
•Safe Work Procedures or guidelines are developed specifically for these activities
•All identified Personal Protective Clothing and Equipment (PPCE) is available and in good order before work commences
OHS707 Working from Heights Guideline
41
Plant Safety
42
• Never transport in a lift with people
• Only keep cylinders “in use” in labs
• Check appropriateness of regulator to the cylinder
• Perform leak testing
• Don’t store or transport incompatible cylinders together
• Ensure valve shut
Gas Cylinders
• Open valve fully then back off 2 turns
• Remove regulator to transport
• Use trolley for transport and push trolley in front of you
• Wear PPE to transport
• No oil or grease on oxygen regulators
• Do not drop, roll or drag cylinders
43
Working safely with electricity
• Check that laboratory electrical equipment has been tagged
• Do not use double adaptors – poorly designed with no overload protection
• Use RCDs on powerboards and extension leads
• Powerboards must be correctly mounted
• Use extension cords as a temporary measure only
• Do not bring untested electrical equipment into the workplace
Electrical Safety
A source of energy sufficient to ignite combustible dusts, flammable vapours or gases etc. Examples include:
(a) a naked flame,
(b) exposed incandescent material,
(c) hot surfaces,
(d) radiant heat,
(e) a spark from mechanical friction,
(f) a spark from static electricity,
(g) an electrical arc,
(h) any electrical, electronic, mechanical or other
equipment.
44
Ignition Sources
Spill preparedness and response
All laboratories must have:• Procedures for potential emergencies• Spill kits• Training sessions/drills to ensure all lab users know how to
respond to an emergency
UNSW Documentation:• OHS421 Chemical Spills Guideline• OHS301 PCB Spill Response and Disposal Procedure• OHS305 Spills Procedure – Mercury• Science Faculty OHS site http://www.med.unsw.edu.au/ohswebsci.nsf• Medicine Faculty OHS site http://ohs.med.unsw.edu.au/ohsweb.nsf 45
Spill preparedness and response
• Contain the spill
• Absorb the spill
• Dispose of used
materials
• Report the spill
• Restock spill kit
46
47
• Domestic• Broken glass• Sharps• Chemical• Biological• Cytotoxic
• Animal carcasses• Radioactive• Schedule 8• Human tissue• Co-mingled• General laboratory
waste
Waste Segregation and Disposal
All waste needs to be segregated into its waste stream according to the UNSW Hazardous Waste Procedure.
Documentation:• OHS014a Waste Disposal Form - Chemical – UNSW• OHS321 Laboratory Hazardous Waste Disposal Guideline
48
Waste DisposalChemical waste treatment and disposal
• Store the waste correctly – appropriate containers, bunding
• Label the waste accurately (contact name, date, inventory)
• Segregate the waste – do not mix incompatible chemicals
• Submit a chemical waste inventory form to Facilities Mgt fax x54532
49
Options for biological waste treatment and disposal
• Bio-waste to go into a labelled bio-waste bag and put it into the yellow
bins (these are collected by the contractor and autoclaved), or
• Autoclave the labelled bio-waste and put it into the yellow bins, or
• Autoclave the waste AND VALIDATE THE LOAD, then de-identify the
waste by putting it into a robust black plastic bag which goes into the
domestic waste
Note: Chemically decontaminated liquid bio-waste is now chemical waste and must only be collected by the chemical contractor.
WASTE DISPOSAL
50
Fume Cupboards
It’s all about the air flow
• Understanding how this equipment works is knowing where the air goes and how it is treated.
• Is it filtered, ducted, recirculated, cleaned?
• Which way does it go
• Turbulence and obstructions– Cabinet Choice needs to be risk based
51
Bench Type Ducted Fume Hood• Used for decanting &
mixing:• Volatile solvents• Corrosive liquids• Toxics if inhalation risk exists• Control of Noxious odours• It captures, dilutes and
exhausts fumes to external atm.
Use of fume cupboards
• Max allowable volumes should be known– E.g. max flammables 7.5L/m2 of base
• Pre use checks to be made– Clean and free of contamination
– Enough space to work safely?
– Extinguisher handy?
– Chemicals not required are removed
• During use – Minimum possible chemicals present
– Reduced reaction rates
• Sash position is important
– Use PPE to perform the work
– After use requirements too.
Sash position is critical
Traffic is an issue too
Recirculating fume cabinets
• Rely on filtration or absorption
• Discharge directly into the lab
• Suitable for light to moderate use with a limited range of substances
Recirculating fume cabinets
Recirculating fume cabinets
• Do Not Use:– Where more than 50mL of corrosive liquids are involved in a rxn that
generates fumes
– Where acid digestions are carried out
– For perchloric acid digestions
– For infectious organism handling
– For carcinogenic material (Cat 1 & 2) except where chemisorbed onto the filter
– For radioactive materials exceeding 10x Annual Limit of Intake for inhalation
– Where temp and humidity may affect filter operation
Recirculating fume cabinets
• Ensure substances used are compatible with filters used
• Do not use for storage
• Do not use after major spills – replace filters
– Treat spills in RFC’s as if they were on the bench!
• Determine filter saturation monthly if not fitted with auto monitors
• Avoid Bunsen use. Keep away from sides (15cm) and the filter (30cm).
• Keep a logbook of:
• Filter change, substances used, volumes used, hours of operation, spill records.
• Periodic monitoring of the exhaust
• Check filter efficiency test certificate sticker date (also for BSC’s)
60
Recirculating fume cabinets
This is NOT a fume cabinet
Do not get them confused
Biological safety cabinets
• These DO NOT filter or absorb any hazardous fumes, vapours or gases.
• They recirculate 70% HEPA filtered air– This also recirculates the vapours leading to
hazardous atmospheres– Also not spark proof, so can ignite the vapours
• 30% HEPA air is returned to the lab
62
Cytotoxic drug safety cabinet
•Intended specifically for handling injectable cytotoxic drugs, but may have wider application in the handling of other hazardous drugs and materials.•These applications may require additional precautions.
Cytotoxic drug safety cabinet
65
Chemical Labelling
66
Information about chemicals - Labelling
You must label the following if they contain Hazardous Substances (except if they are used and cleaned immediately):
• Decanted substances• Mixtures/formulations/preparations • Research/laboratory samples and finished
products • Reaction intermediates and waste-products • Substances in enclosed systems e.g. pipes and
vessels containing hazardous substances
• OHS429 Labelling of Hazardous Substances Guideline
Labelling
69
Chemical Safety - Labelling
70
Chemical Safety - Labelling
71
Labelling
• Manufacturer• Signal words and/or DG
Class– HAZARDOUS, WARNING, POISON, FLAMMABLE, TOXIC
• Chemical and trade names in full
• Risk & Safety phrases, UN #
• Emergency – spills, fire,
leaks, equipment types to
use
• First aid
• Dates?
72
• Signal words and/or DG Class, UN # – HAZARDOUS, WARNING, POISON, FLAMMABLE, TOXIC
• Chemical and trade names in full
• Risk & Safety phrases
• Emergency – spills, fire, leaks, equipment types to
use
• First aid
• Dates?
Labelling decanted containers
73
• Must be accessible – hard copy or electronic
• Must be no more than 5 years old
• Must be used during risk assessment
• Helps decide on airborne contamination monitoring
• Check for adequacy of emergency and spill procedures
• Can be used as the risk assessment if used as directed
• Should go with an injured person to the doctor or hospital
• Need more information? Use other sources such as...
Chemical Safety - MSDS
74
www.CHEMALERT.unsw.edu.au
75
www.CHEMALERT.unsw.edu.au
76
www.CHEMALERT.unsw.edu.au
77
www.CHEMALERT.unsw.edu.au
78
www.CHEMALERT.unsw.edu.au
79
www.CHEMALERT.unsw.edu.au
80
http://hsis.ascc.gov.au/
Chemical Safety - HSIS
81
http://hsis.ascc.gov.au/SearchHS.aspx
Chemical Safety - HSIS
82
Chemical Safety - HSIS
83
Chemical Safety - ADG Code
84
Chemical Safety - ADG Code
85
Chemical Safety - ADG Code
86
Safety in the Laboratory
Operational aspects:• Audits• Inspections• Staff/students leaving the laboratory
• OHS734 Chemical Audit Checklist• OHS614 Chemical Substances - auditing checklist• OHS048aWorkplace OHS Inspection Checklist -Offices, General
Labs & Workshops• OHS704 Laboratory Decommissioning Checklist
87
Safety LiteratureUNSW OHS website
• www.ohs.unsw.edu.au
Australian Standards
• Available through OHS website
WorkCover NSW website
• www.workcover.nsw.gov.au
Safe Work Australia
• http://safeworkaustralia.gov.au/
Safety sign maker
• http://www.stclaire.com/safety_sign_builder/ssb-panel.php
Safety equipment websites
• www.seton.net.au
• www.ansell.com.au/specware/search.asp
88
Other OHS Training
• OHS Awareness online• Hazardous Substances • Bio - Safety and Infection Control• Working Safely with HF (theory!)• Radiation Safety Training• Gene Technology for Researchers
• Evaluation Form
• Attendance Register
• Questions?
89