1 accessories and supplies - lc...

1

Acc

esso

ries

and

Sup

plie

s

3

HP

LC C

olum

ns

web: www.bonnaagela.com

Best ValueGuaranteed Product QualityInnovation to Benefit Customers

Bonna-AgelaTechnologiesBETTER SOLUTIONS FOR CHROMATOGRAPHY

Bonna-Agela Technologies — A Global Supplier for Chromatography Solutions

2014 Message From Bonna-Agela Technologies

As Bonna-Agela is poised to enter its seventh year with confidence and pride in its innovative separation, purification, and sample preparation products, we would like to thank everyone who has supported or contributed to Bonna-Agela Technologies in some way.

What a journey it has been, and Bonna-Agela has become one of the leading chromatography companies after several years' efforts.

Our manufacturing and R&D operation were certified in compliance with ISO 9001, ISO 14001 and passed many quality audits by customers and distributors, including VWR International.

Bonna-Agela remains dedicated to making a difference in R&D, manufacturing, service and applications. Bonna-Agela's HPLC products have acknowledged by USP-PQRI as a contributor of their column database, and Venusil C18 HPLC columns, for example, have been recommended by European Pharmacopoeia.

Bonna-Agela teams never stop pursuing new technologies to bridge the gap between conventional HPLC and new Ultra High Performance LC (UHPLC) systems. Bonna-Agela's sub-2 um Bonshell HPLC columns have been a best choice for applications in both areas, which deliver improved sensitivity and long-lasting lifetimes.

Bonna-Agela has engaged in a new business sector in developing and manufacturing LC hardware and systems for analytical and preparative applications along with our recognized consumables. Flexa MD LC system, one of the many products from this line, has been recommended by the well-known Nature magazine "Product Focus: chromatography"

As one of the core technologies at Bonna-Agela, production scale of specialty chromatography materials has advanced to a new level in tens of kilograms in a single batch with high batch-to-batch reproducibility. Selection from a variety of chromatography media has never been made more easier at Bonna-Agela for your applications.

Your satisfaction is Bonna-Agela's goal. It is an one-stop call to Bonna-Agela's service and applications department for your applications inquiry and service requirement. We would emphasize, however, on the challenging part of the business for better products, satisfied service and new development. Your continued support will be a key to our success and your satisfaction in the coming year

4

Acc

esso

ries

and

Sup

plie

s

Terms and Conditions

Acceptance and AvailabilityAll orders placed are subject to the agreement of Bonna-Agela Technologies Inc. The catalogue does not constitute an engagement of the company to sell all listed products. You are guaranteed to be notifi ed at the time of ordering if the ordereditems are in back-order or discontinued.

Price and PaymentThe prices are in effect at the time of printing. Bonna-Agela Technologies reserves the right to change the prices without notice, though we do our best to provide our customers with advance notice. The prices quoted at the time of ordering will be guaranteed. The general payment term is net 30 days, F.O.B., Newark, Delaware, USA. However we reserve the right to ask for prepayment if customers’ account information is not satisfactory. A 1.5% per month service charge will be added to delinquent accounts. If a purchase order is less than $1000.00, a $50.00 extra charge will be added to the invoice.

ChangesBonna-Agela Technologies reserves the right to change product specifi cations, quantities, designs or prices without prior notice and without liability for such changes.

Shipping PolicyThe standard shipping method is 2 day FedEx within the United States and Canada. We will try to accommodate requests for other shipping methods if they are available. All shipping and handling charges will be billed separately. Should you receive damaged goods, it is imperative that you notify us immediately and save all packing materials for inspection by the carrier.

ApplicationAll products in this catalog should be used for laboratory or manufacturing use only. They are not intended for direct medicinal or food use. Bonna-Agela Technologies assumes no liability for any misuse of the products.

ReturnsBonna-Agela Technologies tries to accommodate all requests for returns of unused goods. However,return of some items may be restricted by the original manufacturers. Please contact us for return authorization before returning any items. A restocking charge may be applied to certain products.

WarrantyAll Bonna-Agela Technologies products are warranted to be free of defects in materials and workmanship. They are not warranted for any other particular purpose. Bonna-Agela Technologies shall not under any circumstance be liable for any incidental, consequential or compensatory damage in conjunction with its products. The maximum liability shall not exceed the invoice price of the product.

PLEASE READ THESE TERMS BEFORE ORDERING. IF YOU HAVE ANY QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US AND OUR STAFF WILL BE GLAD TO ASSIST YOU.

How to Place Orders

Our offi ce is open from 9:00 am to 6:00 pm Eastern Standard Time, Monday through Friday.

To place an order or receive a quote, you may choose from the following contacts:

Bonna-Agela Technologies US2038A Telegraph Rd.Wilmington, DE 19808, USATel: (302) 438 8798Fax: (302) 636 9339E-mail: [email protected]

Bonna-Agela IndiaG#212, 2nd Floor, Sector-63, Noida, Uttar Pradesh Tel: 0120-4225466-71 Fax: 0120-4225465

Bonna-Agela China179 South Street, Teda West Zone, Tianjin 300462, ChinaTel: +86(22)25321032/7023 Fax: +86(22)25321033

Checks:Please make checks payable to:Bonna-Agela Technologies Inc. and send to: Bonna-Agela Technologies Inc.2038A Telegraph Road, Wilmington, DE 19808, USA

Wire Transfer:Please contact us by phone, fax or email for account information.

Credit Cards:Please include the card type and number, expiration date, and card holder name. Due to security concerns, please do not email the information. Please call or send a fax to provide your credit card information.

5

Acc

esso

ries

and

Sup

plie

s

Accessories and Supplies

ClarinertTM Filtration Products

Syringe Filters

Membrane Filters

96-Well Filtration Plates and Collection Plates

Glass Filtration System

Disposable Filtration Funnels with 10 μm Frits

Vials and Seals

Shell Vials and Seals

Inserts For 2 ml Short Thread Screw Vials

2 mL 12x32 mm Screw Neck Vials and Seals

ND11 12x32 mm Snap Ring Vials and Seals

ND11 2 mL 12x32 mm Crimp Neck Vials and Seals

Screw Neck Vials for Storage Purposes

Crimper for HS Vials

Headspace Vials and Seals

2 mL Vial Rack (Cat. No AR0002-1)

HPLC Accessories and Supplies

UV Lamps

Pipettes and Accessories

Disposable Syringe for HPLC Filtration

HPLC Fittings and Tubing

001

001

008

010

010

010

011

011

011

011

012

012

012

013

013

013

014

014

014

015

015

001

Acc

esso

ries

and

Sup

plie

s

ClarinertTM Filtration Products

■ High Quality

■ Cost saving■ Comprehensive■ Reliable partnership

■ Syringe Filters■ Membrane Filters■ 96-Well Filtration Plates and Collection Plates■ Glass Filtration System■ Disposable Filtration Funnels with 10 μm Frits

Important Features

– Bonna-Agela is an ISO 9001 certifi ed manufacturer; all of our products are guaranteed to meet our published specifi cations.– Reduce substantially the customers cost without sacrifi cing quality.– Comprehensive product lines; including some very unique products– Global OEM manufacturing partner

– All fi lters’s housing is made of high purity polypropylene– Female luer-lock inlets on all fi lters secure the fi t to syringes– All fi lters are designed for use in both direction– All fi lters are autoclavable– All products are certifi ed

Syringe Filters

■ Single Layer Filters: Single membrane, commonly used, highly cost-effective; newly developed Ф33 mm Syringe Filters, with pore sizes of 0.22 μm and 0.45 μm are in stock.■ Double Layer Filters: A prefi lter before the main membrane, which would avoid the damage to the soft main membrane from larger particles and clogging of the main membrane by colloidal particles, is good for the overall lifetime, process volume, and effi ciency.■ IC Syringe Filters: The Nylon membrane fi lter is specially developed for IC fi ltration and is manufactured with advanced technology, with micro-pores evenly distributed with extremely low ion residual, which can effectively fi lter the particulate impurities.■ Drying Filters: Syringe fi lters with PTFE membrane, embedded with MgSO4, to combine the drying function with fi ltration in one single step for organic samples. Simple, fast and convenient to use!■ Metal Remover: Syringe fi lters with PTFE membrane, embedded with metal scavenger resin to remove heavy metals from the organic samples at the same time of fi ltration, to eliminate the interference of the metal in subsequent tests, or to protect the HPLC columns from contamination. Simple, fast and effective!■ Organic Remover: Syringe fi lters with nylon membrane, embedded with polystyrene resin to remove hydrophobic organic interference from samples for ion-chromatography, HPLC, molecular biology testing, etc. Simple, convenient and reliable!■ Sterilized Filters: Filter the sample with biological activity or aseptic requirements; generally used as a fast, convenient, reliable sterilization and fi ltration tool in the lab. We supply many kinds of syringe fi lters, which can be used for fi ltration of 1mL to 300 mL sample solutions.

Type of Filters

002

Acc

esso

ries

and

Sup

plie

s

Specifi cations

Type Diameter(mm)

Pressurerating (bar)

Bubble Pointrating(bar)

Water speed(mL/min/cm2)

Air speed(L/min/cm2)

Filtration/Hold-up Volume

Effectivefi lter area(cm2)

Pore size(μm)

10 mL/<25 μL

100 mL/<100 μL

10 mL/<25 μL

100 mL/<100 μL

10 mL/<25 μL

100 mL/<100 μL

10 mL/<25 μL

100 mL/<100 μL

10 mL/<25 μL

100 mL/<100 μL

10 mL/<25 μL

100 mL/<100 μL

--------

162016205858--------

18601860257525751535153524602460--------

3.522.203.522.202.802.502.802.501.200.561.200.561.000.631.000.63

--------

775577557755775577557755

0.220.450.220.450.220.450.220.450.220.450.220.450.220.450.220.450.220.450.220.450.220.450.220.45

13

25

13

25

13

25

13

25

13

25

13

25

MCM

Nylon

PVDF

PTFE

PES

Reg.Cellulose

0.650.653.903.900.650.653.903.900.650.653.903.900.650.653.903.900.650.653.903.900.650.653.903.90

Selection Guide

Material Type Characteristics

MCM(Hydrophilic)

Nylon

PTFE(Hydrophobic)

PVDF(Hydrophilic,Hydrophobic)

PES(Hydrophilic)

Reg. Cellulose(Hydrophilic)

Remove the particle from aqueous; Can be high temperature sterilized. Low protein-binding.

Good fl exibility and chemical compatibility (avoid strong acid and strong organic solution).

Broad chemical compatibility (compatible to any common solvents). Low protein-binding; Can be high temp. sterilized repeatedly; Low extractable; For use with high aqueous solution, pre-wet the fi ltermembrane with MeOH, then rinse with DI water before fi tering samples.

Low extractable; Low protein-binding; Broad chemical compatibility (avoid strong basic solution); Hydrophobic: for use with organic solution;Hydrophilic: can be used with high aqueous solution without pre-wet steps.

Broad chemical compatibility;Apply to high-throughput, high effi cient fi ltration;Low protein-binding.

Low protein-binding;Better strength than MCM.

003

Acc

esso

ries

and

Sup

plie

s

The introduction of extra impurities (extractables) is undesired; we should minimize the extractables during sample preparation.Extractables are often the result of inappropriate choice of materials, improper operation of the device during the manufacturing process,or downstream particle shedding. Particular attention should be paid to potential impurities from the membrane and housing material.The membranes used in Bonna-Agela’s Clarinert Filters are extensively tested to determine their compatibility with various HPLC solvents.

Remarks: R (Resistant), LR (Limited Resistant), NR (Not Resistant)

Chemical Compatibility

Material MaterialMCM MCMR.C R.CNylon NylonPTEE PTEE

1-hexanolCH3COOH, 10 %acetoneacetonitrilefatty hydrocarbonammonia, 1 Maromatic hydrocarbonsbenzeneboric acidtetrachloromethanecarboxylic acidchloroacetic acidchloroformcyclohexanecyclohexanolaetherDMFDMSOalcohol=<98 %ethyl acetatechloroethylene

glycolformic acid, 25 %n-hexaneHCl, 25 %isopropanolmethanolnitrous acid, 25 %pentanephosphoric acid, 25 %phosphoric acid, 45 %KOH, 1Mmineral salt in waterNaOH, 1Mcellontetrahydrofurantolueneacetocaustin, 10 %methyl chloroformchlorylenexylene

RLRNRNRRRRRRLRRNRNRLRRLRNRNRRNRLR

RLRRNRRRLRRRLRNRRLRLRNRRNRLRLRR

RRRRRRRRRLRRNRNRLRRLRNRNRRNRLR

RRRRRRRRRLRLRRNRRRRNRRRR

R-RRRRN/ARLRNRNRNRRRRRRN/ARRR

R-RNRRLRNRRLRLRNRRNRLRRRLRLRLRR

RRRNRRRRRRRRRLRRRLRRRRRR

RRRRRRRRRRRRRRLRRRRRR

Instrument: Waters 600e Pump, 717 Auto-sampling, 2487UV Detector Column: Venusil ASB C18, 4.6×250 mm, 5 μm; Mobile Phase: Water: ACN= 22 : 78; Wave Length: 251 nm

Comparison of Clean Performance of Three Brands’ Filters

AU

0.000

0.005

0.010

0.015

1.93

52.

180

5.39

9 6.30

1

15.2

49

AU

0.000

0.005

0.010

0.015

1.38

8

2.37

7

5.40

7

15.3

11

AU

0.000

0.005

0.010

0.015

Minutes0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00

1.97

92.

307

2.90

7

3.36

0

3.78

2

4.56

4

5.40

2

8.48

1 9.27

9

9.66

49.

902

15.2

89

Agela ClarinertTM

Brand W

Brand X

004

Acc

esso

ries

and

Sup

plie

s

Ordering Information

★ Single Layer & Double Layer

Mixed Cellulose(Ccetate and Nnitrate) Syringe Filters

Nylon Syringe Filters

13 mm

25 mm

33 mm

13 mm with glass prefi lter



13 mm

25 mm

33 mm

13 mm with PP prefi lter



AS011320AS011345AS012520AS012545AS013320AS013345AS011320-GAS011345-GAS012520-GAS012545-GAS013320-GAS013345-G

AS021320AS021345AS022520AS022545AS023320AS023345AS021320-PAS021345-PAS022520-PAS022545-PAS023320-PAS023345-P

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm


200200100100100100200200100100100100

200200100100100100200200100100100100

Membrane Type Pore Size Cat.No.Qty

Hydrophobic PVDF Syringe Filters13 mm

25 mm

33 mm




AS031320AS031345AS032520AS032545AS033320AS033345AS031320-PAS031345-PAS032520-PAS032545-PAS033320-PAS033345-P


200200100100100100200200100100100100

vickey

Sticky Note

加一行，0.8UM 200 AS021380

vickey

Sticky Note

加一行，0.8um 100 AS022580

vickey

Sticky Note

加一行，0.8um 100 AS023380

005

Acc

esso

ries

and

Sup

plie

s

Polyethersulfone (PES) Syringe Filters

Hydrophobic PTFE Syringe Filters

13 mm

25 mm

33 mm




13 mm

25 mm

33 mm





AS041320AS041345AS041301AS042520AS042545AS042501AS042505AS043320AS043345AS043301AS041320-PAS041345-PAS042520-PAS042545-PAS042501-PAS042505-PAS043320-PAS043345-P


0.22 μm0.45 μm1.00 μm0.22 μm0.45 μm1.00 μm5.00 μm0.22 μm0.45 μm1.00 μm0.22 μm0.45 μm0.22 μm0.45 μm1.00 μm5.00 μm0.22 μm0.45 μm

200200100100100100200200100100100100

200200200100100100100100100100200200100100100100100100


Regenerated Cellulose (RC) Syringe Filters13 mm

25 mm

33 mm






200200100100100100200200100100100100

006

Acc

esso

ries

and

Sup

plie

s

Hydrophilic PVDF Syringe Filters13 mm

25 mm

33 mm




AS071320 AS071345 AS072520 AS072545 AS073320 AS073345 AS071320-GAS071345-GAS072520-GAS072545-GAS073320-GAS073345-G


200200100100100100200200100100100100


Glass Fiber Syringe Filters13 mm

25 mm

33 mm

AS091320 AS091345 AS092520 AS092545 AS093320 AS093345

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

200200100100100100

Hydrophilic PTFE Syringe Filters13 mm

25 mm

33 mm




AS081320 AS081345 AS082520 AS082545 AS083320 AS083345 AS081320-GAS081345-GAS082520-GAS082545-GAS083320-GAS083345-G


200200100100100100200200100100100100


007

Acc

esso

ries

and

Sup

plie

s

★ IC Syringe Filters

IC-Nylon Syringe Filters 13 mm

25 mm

IC021320IC021345IC022520IC022545

0.22 μm0.45 μm0.22 μm0.45 μm

200200100100


★ Drying Filters

★ Metal Remover

★ Organic Remover

Hydrophobic PTFE Syringe Filters13 mm 25 mm

AD041345-TAD042545-T

0.45 μm0.45 μm

100100


Hydrophobic PTFE Syringe Filters13 mm 25 mm

MR041345-TMR042545-T

0.45 μm0.45 μm

100100


Nylon Syringe Filters13 mm 25 mm

OR021345-TOR022545-T

0.45 μm0.45 μm

100100


Polypropylene Syringe Filters13 mm 25 mm 33 mm13 mm13 mm25 mm25 mm33 mm33 mm

AS201300AS202500AS203300AS201320AS201345AS202520AS202545AS203320AS203345

20 μm 20 μm 20 μm0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

200100100200200100100100100


008

Acc

esso

ries

and

Sup

plie

s

Mixed Cellulose(Acetate And Nitrate)13 mm

25 mm

47 mm

AM011320AM011345AM012520AM012545AM014720AM014745

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

200200200200100100


Hydrophobic PVDF Syringe Filters

Polyethersulfone ( PES ) Syringe Filters

Hydrophobic PTFE Syringe Filters

Regenerated Cellulose ( RC ) Syringe Filters

13 mm

25 mm

13 mm

25 mm

13 mm

25 mm

13 mm

25 mm

AS931320AS931345AS932520AS932545

AS951320AS951345AS952520AS952545

AS941320AS941345AS942520AS942545

AS961320AS961345AS962520AS962545

0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm

9696100100

9696100100

9696100100

9696100100

Membrane FiltersOrdering Information

★ Sterilized Syringe Filters

Mixed Cellulose ( Acetate And Nitrate ) Syringe Filters

Nylon Syringe Filters

13 mm

25 mm

13 mm

25 mm

AS911320AS911345AS912520AS912545

AS921320AS921345AS922520AS922545

0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm

9696100100

9696100100


009

Acc

esso

ries

and

Sup

plie

s

Hydrophobic PTFE

Polyethersulfone ( PES )

Regenerated Cellulose ( RC )

Hydrophilic PVDF

Hydrophilic PTFE

13 mm

25 mm

47 mm

13 mm

25 mm

47 mm

13 mm

25 mm

47 mm

13 mm

25 mm

47 mm

13 mm

25 mm

47 mm

AM041320AM041345AM042520AM042545AM044720AM044745

AM051320AM051345AM052520AM052545AM054720AM054745

AM061320AM061345AM062520AM062545AM064720AM064745

AM071320AM071345AM072520AM072545AM074720AM074745

AM081320AM081345AM082520AM082545AM084720AM084745

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

200200200200100100

200200200200100100

200200200200100100

200200200200100100

200200200200100100


Nylon

Hydrophobic PVDF

13 mm

25 mm

47 mm

13 mm

25 mm

47 mm

AM021320AM021345AM022520AM022545AM024720AM024745

AM031320AM031345AM032520AM032545AM034720AM034745

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

0.22 μm0.45 μm0.22 μm0.45 μm0.22 μm0.45 μm

200200200200100100

200200200200100100

010

Acc

esso

ries

and

Sup

plie

s

■ 96-well Protein Precipitation Plates: The wide selectivity range of protein precipitation plates makes it possible to supply preparation methods for samples with complex matrices.■ Features and Applications: ★ Use chemical inert material, pH tolerance range: 1-13; ★ Compatible with automatic SPE or manual handling; ★ High throughput, superior to the traditional liquid-liquid extraction technique; ★ Dispense with stirring and centrifugal separation; ★ Larger specifi c surface area speeds up the extraction procedure; ★ Dispense with activating treatment.

96-Well Filtration Plates and Collection Plates

300500

AM3100AM5200

10002000

eaea

Funnel Volume (mL) Flask Volume (mL) Cat.No.Qty

The system includes a borosilicate glass funnel, a sintered borosilicate glass membrane core on the neck, aluminum clamp, and borosilicate glass fi lter fl ask. It can be used with or without a membrane fi lter depending on the application requirement to fi ltrate organic or aqueous solution. It is also used for liquid degassing.

Funnel volumes: 300 mL, 500 mLPore size of the glass membrane core: 10 μmFlask volumes: 1000 ml, 2000 mL

Glass Filtration System

Disposable Filtration Funnels with 10 μm Frits



Type

Filtration plate PP frits 20 μmFiltration plate PP frits 20 μmwith PTFE membrane 0.45 μm

2 mL

2 mL

96GL2025

96GL2025-F

2

2

Cat.No.QtyVol

SLC0006-FSLC0008-FSLC0025-FSLC0060-FSLC0150-F

6 mL10 mL25 mL60 mL150 mL

5050302020

Part No. Description Qty (PK)

011

Acc

esso

ries

and

Sup

plie

s

Vials and Seals

Bonna-Agela Technologies Inc. offers a number of high quality vials and seals. All of them are meet the high standard of the chromatographic applications. The difference of our offering from many other brand name venders is the cost to you. We offer lower price for the same products as many brand name’s due to our lean cost structure and we provide personal assist to you to select right products.

2 mL 12x32 mm Screw Neck Vials and Seals

Shell Vials and Seals

Screw neck vialScrew neck vialScrew neck vial, graduatedScrew neck vial, graduatedBlack screw cap, centre hole; Red silicone/white PTFE septa

1mL shell vial, 8mm PE-Plug

ClearAmberClearAmber

Clear

AV1000-6AV1010-0AV1001-6AV1011-0

AV2000-0

AV0100-6

Std 8-425Std 8-425Std 8-425Std 8-425

Std 8-425

Shell

Description

Description

Color

Color

Cat. No.(100/pk)

Cat. No.(100/pk)

Thread

Thread

300 μL PP Micro-vial300 μL PP Micro-vialScrew neck vialScrew neck vialScrew neck vial, graduatedScrew neck vial, graduatedScrew neck cap, center hole; red silicone/ white PTFE septaScrew neck cap, center hole; red silicone/ white PTFE septa, slittedScrew neck cap, closed top; red silicone/ white PTFE septa

TransparentAmberClearAmberClearAmber

Blue

Blue

Blue

AV1103-PAV1113-PAV1100-6AV1110-0AV1101-6AV1111-0

AV2100-0

AV2200-0

AV2300-0

short 9 mmshort 9 mmshort 9 mmshort 9 mmshort 9 mmshort 9 mm

short 9 mm

short 9 mm

short 9 mm

Description Color

Color

Cat. No.(100/pk)Thread

Vol.

8-425

8-425

AV1131-6

Short thread

Short thread

Inserts for 2 ml Short Thread Screw Vials

Insert, fl at bottom, 31x6 mm, for 9 mm vialsInsert, with assembled plastic spring, 29*6 mm

AV1130-6AV1131-6

Description Cat. No.(100/pk)

300 μL250 μL

ClearClear

vickey

Highlight

vickey

Sticky Note

A

vickey

Sticky Note

加一行， Insert，31x6mm，for 9mm vials 300ul clear AV1132-6

012

Acc

esso

ries

and

Sup

plie

s

Color

Color

Vol.

Vol.

ND11 12x32 mm Snap Ring Vials and Seals

ND11 12x32 mm Crimp Neck Vials and Seals

PP snap ring Micro-vialPP snap ring Micro-vialSnap ring vial Snap ring vial Snap ring vial, graduatedSnap ring vial, graduatedPE snap ring cap, centre hole; white silicone/blue PTFE septa, slittedPEsnap ring cap, centre hole; red silicone/ white PTFE septa

Crimp neck vial Crimp neck vial Crimp neck vial, graduatedCrimp neck vial, graduatedAluminium cap, center hole; red silicone/white PTFE septaManual Crimper

300 μL300 μL2 mL2 mL2 ml2 mL

11 mm

11 mm

widewidewidewide

11 mm

11 mm

TransparentAmberClearAmberClearAmber

Transparent

Red

ClearAmberClearAmber

clear

lacquered

AV0003-PAV0013-PAV3000-6AV3101-0AV3001-6AV3011-0

AV4100-0

AV4201-0

AV5001-6AV5200-0AV5111-6AV5300-0

AV6110-0

AVC011-0

Description

Description

Color

Color

Vol.

Vol.

Cat. No.(100/pk)

Cat. No.(100/pk)

Screw Neck Vials and Seals


Screw neck vial, clear glassScrew neck vial, clear glass, graduatedScrew neck vial, amber glassScrew neck vial, amber glass, graduatedScrew neck cap, closed top; nature PTFE/nature silicone septaScrew neck cap, black, centre hole; red PTFE/white silicone septa

Screw neck vial, clear glassScrew neck vial, amber glassScrew neck cap, closed top; Red PTFE/white Silicone septa

AV7000-6AV7001-6AV7010-0AV7011-0

AV7400-0

AV7410-0

AV7500-6AV7510-7

AV1076-1514-B

Description

Description

Cat. No.(100/pk)

Cat. No.(100/pk)

4 mL 4 mL 4 mL 4 mL

13 mm

13 mm

12 mL 12 mL

15 mm

ClearClearAmberAmber

Black

Black

ClearAmber

Black

013

Acc

esso

ries

and

Sup

plie

s

2 mL Vial Rack (Cat. No AR0002-1)

ColorVol.

Screw neck vial, clear glass, 57*27.5 mmScrew neck vial, amber glass, 57*27.5 mmScrew neck vial, clear glass, 70*27.5 mmScrew neck vial, clear glass, 95*27.5 mmScrew neck vial, amber glass, 95*27.5 mmScrew neck vial, clear glass,140*27.5 mmScrew neck vial, amber glass,140*27.5 mmScrew caps, centre hole; nature PTFE/nature silicone septa, Screw caps, closed top; nature PTFE/ nature silicone septa,

AV7100-7AV7110-7AV7600-7AV7220-7AV7230-7AV7320-7AV7330-7

AV7910-0

AV7920-0


20 mL 20 mL 25 mL40 mL 40 mL 60 mL 60 mL

￠ 22*3 mm

￠ 22*1.5 mm

ClearAmberClearClearAmberClearAmber

white

white

Headspace Vials and SealsColorVol.

Crimp neck headspace vial, 23*75.5 mm, rounded bottom (PE)Crimp neck headspace vial, 22.5*75.5 mm, long neck, rounded bottom Crimp neck headspace vial, long neck, fl at bottom, 22.5*75.5 mmAluminium cap, centre hole; nature silicone/ PTFE septaManual Crimper

AV8000-7

AV8100-7

AV8110-7

AV8800-0

AVC020-0


20 mL

20 mL

20 mL

20 mm*3 mm

20 mm

clear

clear

clear

ColorVol.

Precision thread vials, rounded bottom 46*22.5 mmPrecision thread vials, rounded bottom 77.5*22.5 mmScrew cap, centre hole; White silicone/Blue PTFE septa

AV8500-0

AV8600-0

AV8900-0


10 mL

20 mL

18 mm*1.5 mm

clear

clear

silver

Crimper for HS Crimp Vials

CrimperCrimper

AVC020-0AVC011-0

Product Description Cat. No.(100/pk)

for 20 mm crimp vialsfor 11 mm crimp vials

◆ Easy Handling◆ Chemical Resistance Surface◆ Long Service Lifetime◆ Crimping Pressure Adjustable by a Screw In the Handle

AVC011-0


vickey

Sticky Note

图不对，应该是跟上面钳口瓶放一起的

014

Acc

esso

ries

and

Sup

plie

s

Pipettes and AccessoriesMechanical Pipette (Fixed Volume)

Mechanical Pipette (Adjustable Volume)Single Channel Pipette

8-Channel Pipette 12-Channel Pipette

A722001A722004A722010A722015A722020A722025

A722030A722035A722040A722045A722050A722055

510202550100

200250500100020005000

Cat No. Cat No.Volume (μL) Volume (μL)

A720005A720000A720020A720080A720050

A720210A720220A720240

A720070A720030A720060A720040A720110

A720310A720320A720340

0.1-2.50.5-105-502-2010-100

0.5-105-5050-300

0.050.10.50.51

0.10.55

115550

0.10.55

20-20050-200100-1000200-10001000-5000

0.5-105-5050-300

Cat No.

Cat No.

Cat No.

Cat No.

Volume (μL)

Volume (μL)

Increment (μL)

Increment (μL)

Increment (μL)

Increment (μL)

Volume (μL)

Volume (μL)

Pipette Tips

AD781348AD781349AD780006AD780007

AD780019AD780020AD780046

FT10 μLFT10 μLFT300 μLFT300 μL

FT1000 μLFT1000 μLFT1200 μL

Cat No. Cat No.Qty Qty

HPLC Accessories and Supplies

Bonna-Agela Technologies offers UV lamps of the same or better quality as a low cost replacement for many of those manufactured by original HPLC manufacturers, such as Shimadzu.

UV Lamps

Shimadzu

SPD-10 A, 2000 hLC2010, 2000 hSPD-20 A, 2000 hUV AA

SHL001SHL002SHL003SUV001

Original Instrument Part Number Agela Lamps Part Number

vickey

Highlight

vickey

Sticky Note

整行删

015

Acc

esso

ries

and

Sup

plie

s

Disposable Syringe for HPLC Filtration

HPLC Fittings and Tubing

ZSQ-5 MLLZSQ-2 ML

AF-120PM1960

PM1945R

SyringeSyringe

One-piece fi nger tight fi ttingsPEEK tubePEEK tube

----------Two-Piece Syringe

PEEKPEEK, yellow

PEEK, red

5 mL2 mL

1/16”, 10-321/16''OD, 0.010'' (0.25 mm) ID

1/16'', 0.005” (125 μm) ID

1010

Cat. No

Cat.No

Products

Prouduct

Description

Material

Specifi cation

Specifi cation

Package

■ High Quality■ Low Cost■ Convenient For Use■ Without Needle

LZSQ-2 ML ZSQ-5 ML

016

Acc

esso

ries

and

Sup

plie

s

GC ColumnsAnd

Accessories017

018

018

019

020

020

021

021

022

023

024

024

025

025

026

027

027

028

028

029

030

030

030

031

034

034

DA-1

DA-1MS

DA-5

DA-5MS

DA-35MS

DA-1701

DA-CarBoWax 20M

DA-FFAP

DA-INOWAX

DA-50+MS

DA-1301

DA-624

DA-PLOT Al2O3 “KCl”

DA-PLOT Al2O3 “M”

DA-PLOT Al2O3 “S”

DA-PLOT Mole Sieve

DA-PLOT GasPro

DA-Blood Alcohol Column

DA-PLOT Q

DA-PLOT U

GC Accessories And SuppliesSepta

Injection Port Liners

Ferrules

Column Scribe

1/32” Ultra Low Mass External Unions

vickey

Highlight

vickey

Sticky Note

删

017

Acc

esso

ries

and

Sup

plie

s

DA-1

● 100% bonded and crosslinked dimethylpolysiloxane● Non-polar, equivalent to USP phase G2● Solvent rinseable and high temperature limit● Wide range of column dimensions and stationary phase fi lm thicknesses● Low column bleed, inert surface and high effi ciency● Most polular for general applications

Similar Phases: DB-1, HP-1, Ultra-1, SPB-1, Rxi-1, CP-Si 5CB, BP-1, ZB-1, AT-1, MDN-1, OV-1, OV101


ID(mm) Length(m) Film(μm) Temperature Limit(OC) Cat.No.

0.250.250.250.250.250.250.250.250.250.320.320.320.320.320.320.320.320.320.320.320.320.320.320.320.320.320.530.530.530.530.530.530.530.530.530.530.530.530.530.530.530.53

1515153030306060

1001515252525303030303030505050606060555

7.5101015151515303030303060

0.10.25

10.1

0.251

0.251

0.50.25

10.170.521.050.1

0.251345

0.170.521.050.25

15

0.150.882.65

50.882.650.151.535

0.881.5

2.65355

-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/280-60 to 325/280-60 to 325/280-60 to 325/350-60 to 325/350-60 to 300/320-60 to 325/350-60 to 300/320-60 to 260/280-60 to 325/360-60 to 325/360-60 to 260/280-60 to 260/280-60 to 300/320-60 to 260/280-60 to 320/360-60 to 300/320-60 to 260/280-60 to 260/280-60 to 300/320-60 to 300/320-60 to 260/280-60 to 260/280-60 to 260/280-60 to 260/280

0125-15010125-15020125-15100125-30010125-30020125-30100125-60020125-60100125-00100132-15020132-15100132-25010132-25050132-25100132-30010132-30020132-30100132-30300132-30400132-30500132-50010132-50050132-50100132-60020132-60100132-60500153-05010153-05080153-05260153-07500153-10080153-10260153-15010153-15150153-15300153-15500153-30080153-30150153-30260153-30300153-30500153-6050

018

Acc

esso

ries

and

Sup

plie

s

DA-1MS

DA-5

● Identical selectivity to DA-1, but with much lower column bleed● Ideal for GC-MS analysis and fi rst choice of new method development

● 5 % phenyl, 95 % methylpolysiloxane, bonded and crosslinked● Non-polar, equivalent to USP phase G27● Solvent rinsable and high temperature limit● Wide range of column dimensions and stationary phase fi lm thicknesses● Low column bleed, inert surface with neutral surface and high effi ciency● Most popular for general applications

Similar Phases: HP-1MS, DB-1MS, BPX-1, AT-1MS, ZB-1, Rxi-1, CP-Sil 5CB

Similar Phases: DB-5, HP-5, Ultra-5, SPB-5, Rxi-5, CP-Sil 8CB, BP-5, ZB-5, AT-5, MDN-5, OV-5, SE-52, SE-54




-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350

1125-15021125-30011125-30021125-30051125-30101125-60021132-15021132-25051132-30011132-30021132-30101132-6002

0.250.1

0.250.51

0.250.250.520.1

0.251

0.25

153030303060152530303060

0.250.250.250.250.250.250.320.320.320.320.320.32


-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350

0525-15020525-15100525-30010525-30020525-30100525-60020525-60100532-15020532-15100532-25010532-25050532-25100532-30010532-3002

0.251

0.10.25

10.25

10.25

10.170.521.050.1

0.25

1515303030606015152525253030

0.250.250.250.250.250.250.250.320.320.320.320.320.320.32

019

Acc

esso

ries

and

Sup

plie

s

ID(mm)

ID(mm)

Length(m)

Length(m)

Film(μm)

Film(μm)

Temperature Limit(OC)


Cat.No.

Cat.No.

-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 260/280-60 to 260/280-60 to 300/320-60 to 260/280-60 to 300/320-60 to 300/325-60 to 260/280-60 to 260/280

-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350-60 to 325/350

0532-30050532-30100532-50010532-50050532-50100532-60020532-60100553-10260553-15150553-15500553-30080553-30150553-30260553-3050

1525-15011525-15021525-15051525-15101525-30011525-30021525-30051525-30101525-60011525-60021525-60051525-60101532-15011532-15021532-15051532-15101532-25051532-30011532-30021532-30051532-30101532-60011532-60021532-60051532-6010

0.51

0.170.521.050.25

12.651.55

0.881.5

2.655

0.10.250.51

0.10.250.51

0.10.250.51

0.10.250.51

0.520.1

0.250.51

0.10.250.51

3030505050606010151530303030

15151515303030306060606015151515253030303060606060

0.320.320.320.320.320.320.320.530.530.530.530.530.530.53

0.250.250.250.250.250.250.250.250.250.250.250.250.320.320.320.320.320.320.320.320.320.320.320.320.32

DA-5MS

● Identical selectivity to DB-5, but with much lower column bleed● Best surface inertness for wide range of compounds● Ideal for GC-MS analysis or new method developmentSimilar Phases: HP-5MS, DB-5MS, BPX-5MS, AT-5MS, Rxi-5MS, CP-Sil 8 CB


020

Acc

esso

ries

and

Sup

plie

s

DA-35MS

DA-1701

● Bonded and 35 % phenyl backbone 65 % dimethylsiloxane phase● Equivalent to USP phase G42● Inert to many active compounds● Low column bleed to improve detection sensitivity and quantitation● Applications: Aroclors, PCBs, amines, pesticides, pharmaceutical molecules

● Bonded and crosslingked 14 % Cyanopropyl-phenyl 86 % dimethylsiloxane phase● Low to mid polarity● Inert to many active compounds● Applications: pesticides, herbicides, halogenates. Good confi rmation of analysis of active compounds on DA-5MS columns

Similar Phases: HP-35MS, DB-35, BPX-35, AT-35, Rxi-35, SPB-35

Similar Phases: DB-1701, ZB-1701, BP-10, Rxi-1701, CP-Sil 19 CB



ID(mm)

ID(mm)

Length(m)

Length(m)

Film(μm)

Film(μm)



Cat.No.

Cat.No.

40 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 300/32040 to 300/32040 to 300/320

-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300

3525-15023525-30013525-30023525-60023532-15023532-30023532-60023553-15103553-30053553-3010

6125-15016125-15026125-15106125-30016125-30026125-30106125-60016125-60026125-60106125-1501

0.250.150.250.250.250.250.25

10.51

0.150.25

10.150.25

10.150.25

10.15

15303060153060153030

15151530303060606015

0.250.250.250.250.320.320.320.530.530.53

0.250.250.250.250.250.250.250.250.250.32

021

Acc

esso

ries

and

Sup

plie

s

DA-CarBoWax 20M

DA-FFAP

● Polyethylene glycol (PEG), MW 20,000● Non-Bonded non-crosslinked phase ● Polar phase, equivalent to USP phase G16● Replacement of packed columns with Carbowax 20 M modifi ed

● Nitroterephthalic acid modifi ed Polyethylene glycol (PEG)● Bonded and crosslinked● Non-alcohol/aqueous solvent rinseable● High temperature limit● Polar phase equivalent to USP phase G35● Designed for the analysis of volatitle fatty acids and phenolsSimilar Phases: HP-FFAP, DB-FFAP, CB-WAX58 (FFAP) CB, Stabilwax-DA, BP-21, 007-CW, AT-100




60 to 22060 to 22060 to 22060 to 22060 to 22060 to 21060 to 210

2220-25012220-50012225-30022232-25032232-50032253-10132253-3013

0.10.10.250.30.31.331.33

25503025501030

0.20.2

0.250.320.320.530.53


60 to 240/25060 to 240/25060 to 240/25060 to 240/25060 to 240/25060 to 240/250

60 to 24060 to 24060 to 240

2125-15022125-30022132-15022132-25052132-30022132-50052153-10102153-15102153-3010

0.250.250.250.50.250.5111

153015253050101530

0.250.250.320.320.320.320.530.530.53

vickey

Highlight

vickey

Sticky Note

整行删

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

022

Acc

esso

ries

and

Sup

plie

s


40 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 260/28040 to 240/26040 to 240/26040 to 240/260

2020-25022020-25042020-50022020-50042025-15022025-15052025-30012025-30022025-30052025-60012025-60022025-60052032-15022032-15052032-30012032-30022032-30052032-60012032-60022032-60052053-15102053-30102053-6010

0.20.40.20.4

0.250.5

0.150.250.5

0.150.250.5

0.250.5

0.150.250.5

0.150.250.5111

2525505015153030306060601515303030606060153060

0.20.20.20.2

0.250.250.250.250.250.250.250.250.320.320.320.320.320.320.320.320.530.530.53

DA-INOWAX

● Bonded and crosslinked Polyethylene glycol (PEG)● Solvent washable● Highest temperature limits of bonded PEG phases● Polar phase, equivalent to USP phase G16● Wide applications of polar solvent analysis in food, pharma., cosmetics, petrochemical industriesSimilar Phases: HP-INNOWax, DB-WAX, DB-WAXetr, SupelcoWAX 10, CP-WAX, 52-CB, CB-WAX, Stablilwax, BP-20, 007-CW, AT-Wax, Rxi-Wax, ZB-Wax, HP-20M


vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Sticky Note

整行删

023

Acc

esso

ries

and

Sup

plie

s


40 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 320/34040 to 300/32040 to 300/32040 to 300/320

5020-12015020-12035020-25015020-25035020-50035025-15015025-15025025-15055025-30015025-30025025-30055025-60025032-15015032-15025032-15055032-30015032-30025032-30055032-60025032-60055053-15105053-30055053-3010

0.160.310.160.310.310.150.250.5

0.150.250.5

0.250.150.250.5

0.150.250.5

0.250.51

0.51

1212252550151515303030601515153030306060153030

0.20.20.20.20.2

0.250.250.250.250.250.250.250.320.320.320.320.320.320.320.320.530.530.53

DA-50+MS

● Bonded and crosslinked 50 % phenyl backbone 50 % dimethylsiloxane phase ● Equivalent to USP phase G3 ● Inert to many active compounds ● Low column bleed to improve detection sensitivity and quantization● Applications: Common drug screens, phenols, PAHs, free steroids, pesticides, herbicides. Good confi rmation of the analysis of active compounds on AB-5MS or AB-35MS columns Similar Phases: HP-50+, DB -7, DB-17MS, BPX-50, AT-50, Rxi-50, SPB-50


vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Sticky Note

整行删

024

Acc

esso

ries

and

Sup

plie

s

DA-1301

● Bonded and crosslinked 6 % Cyanopropyl-phenyl 94 % dimethylsiloxane phase ● Equivalent to USP phase G 43, low to mid polarity● Inert to many active compounds● Applications: pesticides, herbiciders, halogenates. Good confi rmation of the analysis of active compounds on DA-5MS or DA-35MS columns

Similar Phases: HP-1301, DB-1301, BP-10, Rxi-1301



-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 280/300-20 to 260/280-20 to 260/280-20 to 260/280

6025-15026025-15106025-30026025-30106025-60026025-60106032-15026032-15106032-30026032-30106032-60026032-60106053-15106053-30106053-3015

0.251

0.251

0.251

0.251

0.251

0.25111

1.5

151530306060151530306060153030

0.250.250.250.250.250.250.320.320.320.320.320.320.530.530.53

DA-624

● Bonded and crosslinked specially designed stationary phase for EPA methods● Mid-polarity● Inert to many active compounds● Applications: EPA methods: 501.3, 502.2, 503.1, 524.2, 601, 602, 8010, 8015, 8020, 8240,8260



-20 to 260-20 to 260-20 to 260-20 to 260-20 to 260-20 to 260-20 to 260-20 to 260

6220-25116225-30146225-60146232-30186232-60186253-30306253-60306253-7530

1.121.41.41.81.8333

2530603060306075

0.20.250.250.320.320.530.530.53

Similar Phases: DB-624, ZB-624, AT-624, Rxi-624, CP-624

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Highlight

vickey

Sticky Note

整行删

025

Acc

esso

ries

and

Sup

plie

s

DA-PLOT Al2O3 “KCl”

DA-PLOT Al2O3 “M”

● Least selective ("polar") aluminum oxide phase● Deactivated with KCl ● Good baseline separation of most C1 to C10 hydrocarbons ● Olefi ns may co-elute with corresponding paraffi n over C5● Minimum surface adsorption of dienes and halocarbons ● ASTM recommended phase ● Preferred choice of hydrocarbon separation

● Strong selective (most "polar") aluminum oxide phase● Deactivated with Na2MoO4 salt ● Mostly baseline separation of C1 to C10 hydrocarbons, good baseline separation of cyclopropane from propylene ● Accurate quantitations of dienes and halocarbons ● ASTM recommended phase ● Preferred choice of hydrocarbon separation



ID(mm)

ID(mm)

Length(m)

Length(m)

Film(μm)

Film(μm)



Cat.No.

Cat.No.

-60 to 200/250-60 to 200/250-60 to 200/250

-60 to 200-60 to 200

-60 to 200/250-60 to 200-60 to 200-60 to 200

-60 to 200/250-60 to 200/250-60 to 200/250

-60 to 200-60 to 200

-60 to 200/250-60 to 200-60 to 200-60 to 200

8125-25058125-30058132-15088132-30088132-50088153-15158153-30158153-50158153-6015

8325-25058325-30058332-15088332-30088332-50088353-15158353-30158353-50158353-6015

5588815151515

5588815151515

253015305015305060

253015305015305060

0.250.250.320.320.320.530.530.530.53

0.250.250.320.320.320.530.530.530.53

Similar Phases: HP-PLOT Al2O3/KCl, GS-Alumina/KCl, CP-Al2O3/KCl PLOT, ZB-Alumina/KCl

Similar Phases: HP-PLOT Al2O3/"M", GS-Alumina, ZB-Alumina

026

Acc

esso

ries

and

Sup

plie

s


-60 to 200/250-60 to 200/250-60 to 200/250

-60 to 200-60 to 200

-60 to 200/250-60 to 200-60 to 200-60 to 200

-60 to 200/250-60 to 200/250-60 to 200/250

-60 to 200-60 to 200

-60 to 200/250-60 to 200-60 to 200-60 to 200

8225-25058225-30058232-15088232-30088232-50088253-15158253-30158253-50158253-60158325-25058325-30058332-15088332-30088332-50088353-15158353-30158353-50158353-6015

55888

1515151555888

15151515

253015305015305060253015305015305060

0.250.250.320.320.320.530.530.530.530.250.250.320.320.320.530.530.530.53

DA-PLOT Al2O3 “S”

● Good selective (mid "polar") aluminum oxide phase● Deactivated with Na2SO4 salt● Excellent baseline separation of C1 to C10 hydrocarbons, excellent of C3, C4 isomer baseline separations ● Less accurate quantitations of dienes and halocarbons● ASTM recommended phase● Preferred choice of hydrocarbon separation Similar Phases: HP-PLOT Al2O3/"S", GS-Alumina, CP-Al2O3/Na2SO4 PLOT, ZB-Alumina, RT-Alumina


027

Acc

esso

ries

and

Sup

plie

s



-80 to 300-80 to 300-80 to 300-80 to 300-80 to 300-80 to 300-80 to 300-80 to 300-80 to 300-80 to 300

8432-05128432-15128432-30128432-15258432-30258453-05258453-15258453-30258453-15508453-3050

12121225252525255050

515301530515301530

0.320.320.320.320.320.530.530.530.530.53

DA-PLOT GasPro

● Proprietary Silica base phase● Very inert to wide range of gases including sulfur gases and Freons, symmetric peak shapes● Truly immobilized coating and smooth baseline workable for valve switching● Preferred column to analyze sulfur gases from hydrocarbon streams and air● Separation of CO and CO2

● No effect of water on retention time ● Regeneration of performance from water adsorptions at 250℃ for 3hr ● ASTM recommended phase● GC-MS applicableSimilar Phases: GS-GasPro, CP-Silica PLOT



-80 to 260/300-80 to 260/300-80 to 260/300

8532-05058532-15058532-3005

555

51530

0.320.320.32

DA-PLOT Mole Sieve

● Molecular Sieve, Zeolite, 5A● Thin and thick coatings for push limit separations, e.g. Ar/O2 separation at 35C, O2/N2 with 15sec ● Truly immobilized coating and smooth baseline workable for valve switching ● Preferred column to analyze fi xed gases from hydrocarbon streams ● Elution order, H2, He, Ne, O2, N2, CH4, CO - Regeneration of performance from water/CO2 adsorptions at 250℃ for 3hr● ASTM recommended phase ● Noble gas, air from methane, fuel cell, etc● Often used with other PLOT columns for fi xed gas separation from sample matrix

Similar Phases: HP-PLOT Al2O3/"S", GS-Alumina, CP-Al2O3/Na2SO4 PLOT, ZB-Alumina, RT-Alumina

028

Acc

esso

ries

and

Sup

plie

s

DA-PLOT Q

● Divinylbenzene polymer particle, non-polar, close to traditional PoraPak Q ● Truly immobilized coating and smooth baseline workable for valve switching and liquid sample introduction at low temperatures● Highest temperature limit, up to 280/300℃● Baseline separation of Air, CO2, water, sulfur gases, hydrogen chlorine, ammonia/light amines from hydrocarbons such as refi nery stream, natural gas, and engine exhaust● Excellent separation of C1 to C3 isomers, good separations of C3 to C12, halocarbons● Excellent inertness and long lifetime of water/alcohol sample, a good secondary choice of wax column for alcohol analysis● Excellent tolerance to strong acid/base sample without affecting retention time● Good anti-oxidation at 280℃ and fast regeneration of performance ● Observed slight sulfur gas, hydrogen chlorine, and amine absorption● Water peak is tailing, but no effect on retention● Good choice for analyzing low level solvent residues from wide samples, such as headspace, aqueous, or organic solutions● Preferred column for residue analysis in petroleum industry, pharmaceutical, environmental, chemical weapon detection● Preferred column to analyze polar compounds including oxygenates from hydrocarbon streams: natural gas, refi nery gas, dienes, ethylene, propyleneSimilar Phases: HP-PLOT Q, GS-Q, CP-PoraPLOT Q HT, Supel PLOT Q, Rt-Q, ZB-PLOT Q



-80 to 280/290-80 to 280/290-80 to 280/290-80 to 280/290

8632-15158632-30158653-15308653-3030

15153030

15301530

0.320.320.530.53

DA-Blood Alcohol Column

● Proprietary PLOT phase ● Reliable blood alcohol analysis● Tolerance of direct sample injection● Excellent confi rmation column to other blood alcohol columns using t-butanol as internal standard



-80 to 260/280 8932-0710107.50.32

029

Acc

esso

ries

and

Sup

plie

s

DA-PLOT U

● Divinylbenzene and Ethylene glycol dimethacrylate copolymer particle, polar, close to traditional PoraPack U● Truly immobilized coating and smooth baseline workable for valve switching and liquid sample introduction at low temperatures● Improved separation and selectivity of Air, CO2, water, sulfur gases, hydrogen chlorine, ammonia/light amines from hydrocarbons● Symmetric water peak shape, water elute after C3● Excellent separation of C1 to C3 isomers, good separations of C3 to C12, halocarbons● Excellent inertness and long lifetime of water/alcohol sample, a good secondary choice of wax column for alcohol analysis● Excellent tolerance to strong acid/base sample without affecting retention time● Observed slight sulfur gas, hydrogen chlorine, and amine absorption● Good choice for analyzing low level solvent residues from wide samples, such as headspace, aqueous, or organic solutions● Preferred column for residue analysis in petroleum industry, pharmaceutical, environmental, chemical weapon detection● Preferred column to analyze polar compounds including oxygenates from hydrocarbon streams: natural gas, refi nery gas, dienes, ethylene, propylene Similar Phases: HP-PLOT U, CP-PoraPLOT U



-80 to 190/200-80 to 190-80 to 190

-80 to 190/200-80 to 190

8732-15108732-30108732-30208753-15208753-3020

1010202020

1530301530

0.320.320.320.530.53

030

Acc

esso

ries

and

Sup

plie

s

GC Accessories and Supplies

Septa

Septa BTO

Advanced Green 3

B02-1002B02-1040B02-1031B02-1001B02-1032

B02-1006B02-1005B02-1041

B02-3004B02-3005B02-3007B02-3008B02-3009B02-3011B02-3012B02-3013B02-3015B02-3019B02-3020

1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk 1 / pk 5 / pk

Septa BTO 5 mm Center guide (50 / pk)Septa BTO 3/8" (9.5 mm) (50 / pk)Septa BTO 11.5 mm Center guide (50 / pk)Septa BTO 11 mm (7/16") Center guide (50 / pk)septa BOT 17 mm, Center guide

Septa AG3 5 mm Center guide (50 / pk)Septa AG3 11 mm (7/16") Center guide (50 / pk)Septa AG3 3/8" (9.5 mm) (50 / pk)

Liner, 4 mm, 79 mm length, Single Taper w/Sil WoolLiner, 4 mm, 79 mm length, Single Taper w/Sil WoolLiner, 4 mm, 79 mm length, Single Taper w/Sil WoolLiner, 4 mm, 79 mm length, Double TaperLiner, 4 mm, 79 mm length, Double TaperLiner, 4 mm, 79 mm length, Double TaperLiner, 4 mm, 79 mm length, Single TaperLiner, 4 mm, 79 mm length, Single TaperLiner, 4 mm, 79 mm length, Single TaperLiner, 4 mm, 79 mm length, with Silanized WoolLiner, 4 mm, 79 mm length, with Silanized Wool

Cat.No.

Cat.No.

Cat.No. Qty.

Description

Description

Description

Extended temperature range, low-bleed

Extended temperature range, low-bleed

● Maximun temperature 400℃● Virtually eliminates injection-port sticking● Preconditioned packaged in glass to prevent contamination

● True low-bleed, high temperature green septum. ● Maximum temperature 400℃

● Each batch GC-FID tested.● Ideal for use with low-bleed, “Mass Sepc” capillary columns

Injection Port Liners

Organosilane deactivated borosilicate glass (quartz where notes). Guaranteed inertness for phenols, organic acids and bases. Glass wool is also deactivated. These capillary injection port liners provide a clean, non-adsorptive surface for your samples. Regular replacement of the liner protects your capillary columns from potentially harmful non-volatiles that might otherwise deposit on your columns.

For Agilent Capillary GC Instruments

031

Acc

esso

ries

and

Sup

plie

s

B02-3022B02-3030B02-3031B02-3032B02-3033B02-3034B02-3036

10 / pk 1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk

Liner, 4 mm, 79 mm length, with Silanized WoolLiner, 2 mm, 79 mm length, Splitless, GlassLiner, 2 mm, 79 mm length, Splitless, GlassLiner, 2 mm, 79 mm length, Splitless, GlassLiner, 2 mm, 79 mm length, Splitless, QuartzLiner, 2 mm, 79 mm length, Splitless, QuartzLiner, 2 mm, 79 mm length, Splitless, Quartz

Cat.No. Qty.Description

B02-3201B02-3202B02-3203B02-3204B02-3205B02-3206B02-3207B02-3208B02-3209B02-3210B02-3211B02-3212

B02-3103B02-3104B02-3105B02-3112B02-3113B02-3114B02-3115B02-3116B02-3117B02-3118B02-3119B02-3120

1/16" to 0.3 mm ferrules1/16" to 0.4 mm ferrules1/16" to 0.5 mm ferrules1/16" to 0.8 mm ferrules1/16" to 1.0 mm ferrules1/16" to 1.2 mm ferrules1/16" to 0.4 mm -Agilent style1/16" to 0.5 mm -Agilent style1/16" to 0.8 mm -Agilent style

B02-2126B02-2127B02-2128B02-2129B02-2130B02-2131B02-2012B02-2013B02-2014

1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk

1 / pk 5 / pk10 / pk 1 / pk 5 / pk10 / pk 1 / PK 5 / PK10 / PK 1 / pk 5 / pk10 / pk

Liner, 4 mm Split, 92 mm length,Autosystem for PerkinElmer GCLiner, 4 mm Split, 92 mm length,Autosystem for PerkinElmer GCLiner, 4 mm Split, 92 mm length,Autosystem for PerkinElmer GCLiner, 4 mm Split, 92 mm length Autosystem w/Wool for PerkinElmer (ea)Liner, 4 mm Split, 92 mm length Autosystem w/Wool for PerkinElmer (ea)Liner, 4 mm Split, 92 mm length Autosystem w/Wool for PerkinElmer (ea)Liner, 2 mm Splitless, 92 mm length,Autosystem for PerkinElmer GCLiner, 2 mm Splitless, 92 mm length,Autosystem for PerkinElmer GCLiner, 2 mm Splitless, 92 mm length,Autosystem for PerkinElmer GCLiner, 100 mm, Dimple Spliter for PerkinElmer GCSLiner, 100 mm, Dimple pliter for PerkinElmer GCLiner, 100 mm, Dimple Spliter for PerkinElmer GC

4 mm Open Split w/Sil. Wool for Varian 1075/10774 mm Open Split w/Sil. Wool for Varian 1075/10774 mm Open Split w/Sil. Wool for Varian 1075/1077Liner, Frit Split for Varian 1075/1077Liner, Frit Split for Varian 1075/1077Liner, Frit Split for Varian 1075/1077Liner, 4 mm Open Split, for Varian 1075/1077Liner, 4 mm Open Split, for Varian 1075/1077Liner, 4 mm Open Split, for Varian 1075/1077Liner, 74 mm length, Splitless, Glass for Varian 1075/1077 (ea)Liner, 74 mm length, Splitless, Glass for Varian 1075/1077 (ea)Liner, 74 mm length, Splitless, Glass for Varian 1075/1077 (ea)

Cat.No.

Cat.No.

Qty.

Qty.

Description

Description

For Perkin-Elmer Capillary GCs

For Varian Capillary GCs

Vespel Ferrules-Sold In Packages Of 10

Ferrules

● Upper temperature limit: 350℃● 100% high-temperature DuPont polyimide● Fairly hard; tends to seal● permanently to the column

Capillary Column Ferrules Cat.No.

032

Acc

esso

ries

and

Sup

plie

s

1/16" ferrules1/8" ferrules1/4" ferrules

1/8" to 0.4 mm Vespel1/8" to 0.5 mm Vespel1/8" to 0.8 mm Vespel1/8" to 1/16" Vespel1/4" to 1/16" ferrules1/4" To 1/8" ferrules

B02-2125B02-2133B02-2141

B02-2135B02-2136B02-2137B02-2138B02-2143B02-2144

Straight Ferrules-for tubing with ODs as listed

Agilent style—Short ferrule, especially for Agilent inlet systems: 4890,5890 and 6890


Short Ferrules for Agilent Inlets

Capillary Column Ferrules

Reducing Ferrules

Reducing Ferrules

Cat.No.

B02-2101B02-2109B02-2116

B02-2001B02-2002B02-2003B02-2004

B02-2102B02-2103B02-2104B02-2105B02-2106

B02-2110B02-2111B02-2112B02-2113B02-2117B02-2118B02-2119B02-2120B02-2121B02-2122B02-2123B02-2124

1/16" Graphite Ferrule1/8" Graphite Ferrule1/4" Graphite Ferrule

1/16" to 0.4 mm Graphite Ferrule1/16" to 0.5 mm Graphite Ferrule1/16" to 0.8 mm Graphite Ferrule1/16" to 1.0 mm Graphite Ferrule

1/16" to 0.4 mm Graphite Ferrule1/16" to 0.5 mm Graphite Ferrule1/16" to 0.8 mm Graphite Ferrule1/16" to 1.0 mm Graphite Ferrule1/16" to 1.2 mm Graphite Ferrule

1/8" to 0.4 mm Graphite Ferrule1/8" to 0.5 mm Graphite Ferrule1/8" to 0.8 mm Graphite Ferrule1/8" to 1/16" Graphite Ferrule1/4" to 1.0 mm Graphite Ferrule1/4" to 0.4 mm Graphite Ferrule1/4" to 0.5 mm Graphite Ferrule1/4" to 0.8 mm Graphite Ferrule1/4" to 1/16" Graphite Ferrule1/4" to 1/8" Graphite Ferrule1/4" to 6.0 mm Graphite Ferrule1/4" to 4.0 mm Graphite Ferrule

Cat.No. Description

Graphite Ferrules—Sold 10/pack Except as Noted


● Upper temperature limit: 450℃● High-purity Graphite; Preferred for capillary GC use● Ideal for glass-to-metal connections; doesn't stick to glass● Reusable if not over-tightened

033

Acc

esso

ries

and

Sup

plie

s


Short Ferrules for Agilent Inlet


Reducing Ferrules

B02-2145B02-2153B02-2160

B02-2005B02-2006B02-2007

B02-2146B02-2147B02-2148B02-2149B02-2150

B02-2154B02-2155B02-2156B02-2157B02-2161B02-2162B02-2163B02-2164B02-2166B02-2167

1/16" V/G Ferrules1/8" V/G Ferrules1/4" V/G

1/16" to 0.4 mm V/G Ferrules1/16" to 0.5 mm V/G Ferrules1/16" to 0.8 mm V/G

1/16" to 0.4 mm V/G Ferrules1/16" to 0.5 mm V/G Ferrules1/16" to 0.8 mm V/G1/16" to 1.0 mm V/G Ferrules1/16" to 1.2 mm V/G

1/8" to 0.4 mm V/G Ferrules1/8" to 0.5 mm V/G Ferrules1/8" to 0.8 mm V/G1/8" to 1/16" V/G Ferrules1/4" to 0.4 mm V/G1/4" to 0.5 mm V/G1/4" to 6.0 mm V/G Ferrules1/4" to 0.8 mm V/G Ferrules1/4" to 1/16" V/G Ferrules1/4" to 1/8" V/G

Cat.No. Description

Vespel/Graphite Ferrules –Sold in Packages of 10


● Upper temperature limit: 450℃● Made from quality DuPont polyimide/graphite blend● Recommended for GC/MS interface applications



B02-2169B02-2176B02-2182

B02-2170B02-2171B02-2172B02-2173B02-2174B02-2175

1/16" Tefl on1/8" Tefl on1/4" Tefl on

1/16" to 0.3 mm Tefl on1/16" to 0.4 mm Tefl on1/16" to 0.5 mm Tefl on1/16" to 0.8 mm Tefl on1/16" to 1.0 mm Tefl on1/16" to 1.2 mm Tefl on

Cat.No. Description

Tefl on Ferrules –Sold In Packages of 10


● Upper temperature limit: 250℃● 100% Tefl on; completely inert

034

Acc

esso

ries

and

Sup

plie

s

Reducing FerrulesB02-2177B02-2178B02-2179B02-2180B02-2183B02-2185B02-2186B02-2187

1/8" to 0.4 mm Tefl on1/8" to 0.5 mm Tefl on1/8" to 0.8 mm Tefl on1/8" to 1/16" Tefl on1/4" to 6 mm Tefl on1/4" to 1/16" Tefl on1/4" To 1/8" Tefl on1/4" to 3/16" Tefl on

Cat.No. Description

Description

Column Scribe

Used to cut capillary tubing. Simply pull one smooth edge of the hard ceramic scribe (tilted about 45 degrees) across the column to lightly score the fused silica .Bend the column opposite the score and the column separate cleanly.


B02-1006 Column Scribe, 10 / pk

Cat.No.

1/32” Ultra Low Mass External Unions

For capillary tubing 0.1 to 0.32 mm I.D. It has very low mass and can be hand-tightened to seal.Use only with 1/32” fused silica adapters; metal ferrules cannot be used.


Description

B02-4001B02-4002B02-4003B02-4004B02-4005B02-4006

1/32" Union, Bore 0.25 mm1/32" Union, Bore 0.50 mm1/32" Union, Bore1/32" 1/32" Fused Silica Tubing Adapter Tubing o.d.<0.25 mm1/32" Fused Silica Tubing Adapter Tubing o.d. 0.25-0.4 mm1/32" Fused Silica Tubing Adapter Tubing o.d. 0.5 mm

Cat.No.

2

Acc

esso

ries

and

Sup

plie

s

1 accessories and supplies - lc...

Documents