coverfen.pdf 1 2013-04-05 16:02:54 - jimexs · rod guide, zinc rod guide, zinc deadbolt locks part...

C

M

J

CM

MJ

CJ

CMJ

N

coverFen.pdf 1 2013-04-05 16:02:54

Important Information

Payment Terms

Sales ConditionsMinimum Order

Payment terms

Shipping Conditions

Return for Credit

Limited Warranty

Net, 30 days (upon credit approval)

F.A.B. Our wharehouse.

All credit returns must first be approved by our inside sales staff and must have a Return Marchandise Authorisation number (RMA) before they are sent back. Products must be in their original packaging.

All returns will be inspected by Jimexs inc. before issuing a credit. Note a 20% re-stocking charge will be applied.

Opening account A request to open an account can be done by sending a request to our custo-mer service only when there is a minimum buying potential of $2500 per year and the cumulated purchases of current year are equivalent or higher than $1000. The credit limit will be establish by your company’s credit and your buying potential.

$50.00 minimum order if not, an extra $5.00 handling fee will be added to your invoice.

The responsibility of Jimexs inc. is limited to the warranties offered by its suppliers. Jimexs inc. is not responsible for damages direct or indirect or indirect labour costs in the result of the replacement of a product.

This limited warranty is the only one given by Jimexs inc. The products illustrated in this catalogue are not warrantied by Jimexs inc.

If any information on application or installation are not clear or missing, it is the client’s responsibility to request this information from Jimexs or its suppliers.

No Jimexs inc. employees are authorized to give any kind of warranty on behalf of Jimexs inc. on the products illustrated in this catalogue or any products sold by Jimexs inc.

jimexs.com | [email protected]

C

M

J

CM

MJ

CJ

CMJ

N

p0EN_cover.pdf 1 2013-05-06 11:52:33

Serrures à paletteSerrures à paletteSummary

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Tool Boxes1

Locks2-10

Handles11-13

Hinges14-18

Latches and Bolts19-20

Drawer Slides21

Door Supports and Holders22-24

Cargo Control25-27

Adhesives and Sealants28

Rubber and Weatherstripping29-31

Mud Flaps, Floor Hardware32

Miscellaneous33

Ventilation and Heating34

Rivets35-39

Threaded Rods39

C

M

J

CM

MJ

CJ

CMJ

N

p0EN_sommaire.pdf 1 2013-05-06 11:50:43


J-Boxs Tool Boxes

1

118-124 18’’ 18’’ 24’’118-136 18’’ 18’’ 36’’118-148 18’’ 18’’ 48’’118-160 18’’ 60’’118-436 24’’ 18’’ 36’’118-448 24’’ 18’’ 48’’118-460 24’’ 18’’ 60’’124-124 24’’ 24’’ 24’’124-136 24’’ 24’’ 36’’124-148 24’’ 24’’ 48’’124-160 24’’ 24’’ 60’’124-172 24’’ 24’’ 72’’130-136 24’’ 30’’ 36’’130-148 24’’ 30’’ 48’’130-160 24’’ 30’’ 60’’130-172 24’’ 30’’ 72’’136-124 24’’ 36’’ 24’’136-136 24’’ 36’’ 36’’136-148 24’’ 36’’ 48’’136-160 24’’ 36’’ 60’’136-172 24’’ 36’’ 72’’

118-236 18’’ 18’’ 36’’118-248 18’’ 18’’ 48’’118-260 18’’ 18’’ 60’’118-536 24’’ 18’’ 36’’118-548 24’’ 18’’ 48’’118-560 24’’ 18’’ 60’’124-236 24’’ 24’’ 36’’124-248 24’’ 24’’ 48’’124-260 24’’ 24’’ 60’’124-272 24’’ 24’’ 72’’130-236 24’’ 30’’ 36’’130-248 24’’ 30’’ 48’’130-260 24’’ 30’’ 60’’130-272 24’’ 30’’ 72’’136-236 24’’ 36’’ 36’’136-248 24’’ 36’’ 48’’136-260 24’’ 36’’ 60’’136-272 24’’ 36’’ 72’’

128-012 28-1/2’’ 24’’ 12’’128-018 28-1/2’’ 24’’ 18’’128-024 28-1/2’’ 24’’ 24’’

One-Door Tool Box with T-Handle

Two-Door Tool Box with compression lock

Part Depth Height Width

Aluminum 0.100’’, also available in 0.063’’

Aluminum 0.100’’, also available in 0.063’’

Step Tool Box with T-HandleAluminum 0.100’’

18’’

124-124

124-248

128-024



J-Boxs Tool Boxes' custom design are welcomed with quick lead time garanteed.

C

M

J

CM

MJ

CJ

CMJ

N

p1EN.pdf 1 2013-10-17 13:50:13

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Paddle Handles

2

225-101 ZincPart Finish Specifications

Locking CH501 with holes

Non-Locking with holes

225-102225-103225-191

225-202

ZincZinc

Locking CH502 with holesLocking CH503 with holes


Zinc

225-201 S/S Locking CH501 with holes

225-291 S/S225-203

S/SS/S Locking CH503 with holes

225-951

225-965

Plastic

Neoprene

Inside release knob - black

Gasket225-961 Rubber Gasket

235-101 Zinc CH501235-102235-103235-104

ZincZinc

CH502CH503

Zinc

235-105 Zinc CH505CH504

Replacement key cylinders

Special replacement key cylinder

235-101

237-101 237-111

237-121 237-131

237-101 Nickel Slotted insert237-111 Hex insertNickel237-121 Nickel Black knob237-131 Wing typeNickel

Paddle handles


230-531 Zinc Striker for handle

230-531

225-961225-951

225-201

Accessories

5.50’’ x 4.25’’

Part Finish Specifications



C

M

J

CM

MJ

CJ

CMJ

N

p2EN.pdf 1 2013-10-07 10:05:46


Paddle Handles

3




225-502225-503225-591

225-522

ZincZinc

Locking CH502 with holesLocking CH503 with holes


Zinc

225-521 S/S Locking CH501 with holes

225-596 S/S225-523

S/SS/S Locking CH503 with holes

235-701 Zinc CH501235-702235-703235-704

ZincZinc

CH502CH503

Zinc

235-705 Zinc CH505CH504


225-401 S/S Locking CH501 with holes225-491 Non-Locking with holesS/S


225-501

235-701

225-401

Tool Box Locks

Junior paddle handles4.75’’ x 3.625’’

3.25’’ x 3.25’’

225-951225-955

PlasticRubber

Inside release knob - blackGasket

230-531 Zinc Striker for handle

230-531

225-955 225-951

AccessoriesPart Finish Specifications



C

M

J

CM

MJ

CJ

CMJ

N

p3EN.pdf 1 2013-10-07 10:16:47

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Recessed T-Handles

4

226-001 S/SPart Finish Specifications

4.88’’ x 4.75’’

Locking CH501, gasket

Dust cap

226-002226-003 S/S

Locking CH502, gasketLocking CH503, gasket

S/S

226-101 S/S Locking CH501, gasket, dust cover

226-191 Chrome

S/S

226-199 Neoprene Gasket


CH501235-202235-203235-204

ZincZinc

CH502CH503

Zinc

235-205 Zinc CH505CH504



Recessed handle - non-locking - 6-1/8" dia.227-226227-236227-246

S/SS/S

Recessed handle 2 pts - non-locking - 6-1/8" dia. Recessed handle - Locking - 6-1/8" dia.

S/S

Recessed handle 2 pts - Locking - 6-1/8" dia.

226-102226-103

Dust cap226-195 Plastic

235-201

T-Handles

S/S

226-406

226-406 ChromePart Finish Specifications

Handle - key cylinder not included226-451226-452226-453

--

Key cylinder J201 #18400DBJ201-09Key cylinder J202 #18400DBJ202-09

-

Key cylinder J203 #18400DBJ203-09

“Whale Tail” recessed T-handle

Locking CH502, gasket, dust coverLocking CH503, gasket, dust cover


Accessories


Handle 227-226, 2 rods 230-301 & 2 guides 230-501227-241 Handle 227-246, 2 rods 230-301 & 2 guides 230-501S/S

Complete kit with rods and guides

Recessed D-handles

Recessed D-handles

227-951 RubberPart Finish Specifications

Gasket for handles 227-216, 227-226227-957 Gasket for handles 227-236, 227-246Rubber

Accessories

226-191

226-199226-101

226-195

227-236,227-246

227-216,227-226

227-957227-951

4

C

M

J

CM

MJ

CJ

CMJ

N

p4EN.pdf 1 2013-10-11 14:08:38


Specialized handles

5

“RV” paddle handles


Locking CH501 with holesS/S Non-Locking with holes

235-301 Zinc CH501

CH509

235-302235-303235-304

235-306

ZincZinc

CH502CH503

CH507

Zinc

235-305

235-308Zinc

CH510Zinc

235-307 ZincCH508Zinc

235-309235-310

Zinc CH505Zinc CH506

CH504


225-791*

225-701

235-301

Tool Box paddle handles

225-819 Zinc Rod guide

Rotary paddle handle

225-853 Black225-855 White

225-851 Chrome 3.47’’ x 4.28’’, Lockable3.47’’ x 4.28’’, Lockable3.47’’ x 4.28’’, Lockable

225-851 - Rear view

225-851 - Front view

225-301 CH-501 Locking CH501 with holes224-457 - Striker

4.37’’ x 3.27’’

225-301 225-457




* Rod guide not included

C

M

J

CM

MJ

CJ

CMJ

N

p5EN.pdf 1 2013-10-07 10:52:22

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Handles, rods and guides

6 6

RodsPart Diameter

230-201230-101

5/16’’1/4’’

Lenght

34’’36’’

230-301230-221

3/8’’5/16’’

36’’

230-321 3/8’’ 48’’

48’’

230-311 3/8’’ 36’’

GuidesPart Specification

230-511230-501

Rod guide, zincRod guide, zinc

Deadbolt Locks

Part Specification

224-926224-921

Zinc, 48’’ rods, leftZinc, 48’’ rods, right

3 points

230-501

224-921

230-511

230-101 230-201230-221

230-301230-321

230-311

Locking T-handle

Part SpecificationFinish

226-771 Center only226-751 Complete kit

S/SS/S

230-201 Rod230-511 Rod guide

ZincZinc

Complete kit with rods and guides

Part KeyFinish

224-801 CH501S/S

Locking paddle handle - 2 ptsComplete kit with rods and bolts

224-801

226-751

Flush BoltsPart SpecificationFinish

240-353 45°, for 3/8’’ rod240-351 45°, for 1/4’’ rod

ZincZinc

240-361 30°, for 1/4’’ rodZinc

240-351 240-353 230-361

C

M

J

CM

MJ

CJ

CMJ

N

p6EN.pdf 1 2013-10-07 11:28:15

228-423 Chrome228-421 Chrome flush mount striker, non-locking, 4-1/2"

flush mount striker, non-locking, 5-1/4"228-425 Chrome 3/8" offset striker, non-locking, 6-3/4"

Refrigeration handles

228-483 S/S228-481 S/S 5-1/2"

6-3/4"

High temperature handles

228-451* Chrome228-441* Chrome Ext. handle and striker included

Ext/Int. handle and striker included

228-491 Plastic Inside handle only228-461* S/S Ext/Int. handle and striker included

Refrigeration door kits

228-431 S/S Locking, flush mount, 40" S/S bar

222-641 S/S222-621 S/S Lockable, 320mm x 165mm

Lockable, 358mm x 138mm

Compression recessed locksKit, tube not included

222-621

228-441

228-491

Dual refrigeration handle

228-421

228-425

228-431

228-423

228-461 228-463

228-451, 228-461

FinishPart Specification






Refrigeration locks

7

* Adjustable striker - 1/8" to 1/4"

C

M

J

CM

MJ

CJ

CMJ

N

p7EN.pdf 1 2013-10-15 09:30:25

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Cab Locks

8

Cab locks

224-406 Zinc Left side, 2” x 3.38”224-411 Zinc Without inside release, right side, 2” x 3.38”224-416 Zinc Without inside release, left side, 2” x 3.38”224-481 Zinc With inside release, right side, 2.875’’ x 2.9375’’224-491 Zinc Universal slamming, 5.375” x 3.875”

224-606 Zinc With locking trigger, left side, 2.375’’ x 3.375’’224-601 Zinc With locking trigger, right side, 2.375’’ x 3.375’’

224-401 Zinc Right side, 2” x 3.38”


Off-Road vehicle hardware

228-206 Right Cab Lock with Inside handle and striker223-001 Plastic Push-Button Handle, reinforced with nylon, 7-1/4’’223-351 Plastic Window Throw-Away, reinforced with nylon, 4’’202-201 Plastic Window Hinge, reinforced with nylon, 2.68’’

228-201 Left Cab Lock with Inside handle and striker

224-401 224-416

224-481 224-491

228-201 223-001

223-351

224-601

202-201


C

M

J

CM

MJ

CJ

CMJ

N

p8EN.pdf 1 2013-10-07 11:48:25


Compression Locks

9

Compression Locks

222-940 S/S Handle222-941222-942222-945

222-947

S/SS/SS/S

Handle clip Handle keeper

S/S

222-946Rod guide

222-121 S/S


27mm, 2 points - 2 rod guides

222-111 S/S 22mm, 3 points - 3 rod guides222-115 S/S 9’ 6’’ tube, 22 mm

222-123 S/S 27mm, 2 points - 3 rod guides222-125 S/S 9’ 6’’ tube, 27 mm222-581 Aluminum 27mm, 2 points - 3 rod guides222-589 Aluminum 10’ tube, 27mm

222-930 S/S Handle222-931222-932222-935

222-937

S/SS/S

Handle clip Handle keeper

S/S

222-936Rod guide

222-951 Aluminum Right hand cam222-952222-953222-954

222-956

AluminumNylon

Left hand camKeeper

Aluminum

Aluminum

AluminumAluminum

222-955Handle

222-957 Handle keeper

Upper bearing plateLower bearing plate

Components for 222-111

Components for 222-121, 222-123


222-581

222-111

222-121

CamS/S Keeper

S/S CamS/S Keeper




C

M

J

CM

MJ

CJ

CMJ

N

p9EN.pdf 1 2013-05-06 11:45:00

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Compression Locks

10

Compression Locks

222-203 1969-6XEberhard

Handle222-205222-207222-209

222-213

1969-4X1969-391-1969-51969-101969-111969-81969-9X1969-2X1969-15625-165625-17

Seal pinSeal plate

1969-7X

222-211Middle rod bracket cover - topHandle clipBushing

222-215 Middle rod bracket cover - bottom222-217222-219

222-223

Bearing cover - back plate - topBearing cover - back plate - bottom

222-221KeeperCam

222-225 Bolt222-227 Locknut

222-583 Zinc 2 points, 4 rod guides

222-201 Steel Complete Eberhard #1969 Anti-rack222-451 Zinc Dead bolt lock

222-585 Zinc 27mm, 2 points, 3 rod guides

222-985 Zinc Handle222-987 Handle keeper Zinc


222-051 AluminumPart Finish Specifications

Lockable, gray222-801222-802222-803

222-805

---------

Key cylinder #301Key cylinder #302

-

222-804Key cylinder #305Key cylinder #304Key cylinder #303

222-806 Key cylinder #306222-807222-808

222-810

Key cylinder #307Key cylinder #308

222-809Key cylinder #310Key cylinder #309

Cargo-Vise locks


222-201 222-451

222-985 222-987

222-585

222-051


Part Specifications


- Tube not included

222-583

C

M

J

CM

MJ

CJ

CMJ

N

p10EN.pdf 1 2015-11-20 10:32:27


Grab Handles

11

Grab handles

221-201 Chrome 7’’ C.-C., 4 holes221-203

5’’ C.-C., 4 holesCaoutchouc

221-211 ChromeJoint pour 221-201

221-851 Plastic 8’’ C.-C., 2 holes

221-851

221-211221-201

221-301


13’’ O.D., 4 holes221-106 13’’ O.D., 4 holesZinc

221-301 S/S 11-1/2’’ O.D., 4 holes221-311 28’’ O.D., 4 holesS/S

221-106

221-186

221-186 13’’ O.D., 2 holesZinc221-196 Chrome 13’’ O.D., 2 holes

221-708 Zinc 5-1/2’’ C.-C., 4 holes

221-708






C

M

J

CM

MJ

CJ

CMJ

N

p11EN.pdf 1 2013-05-06 11:44:55

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Handles

12

Grab handles

220-801 Plain steel 4’’, holes 3.90" C.-C.220-806220-821 S/S

4’’, holes 3.90" C.-C.4-5/16’’, holes 3.90’’ C.-C.

Zinc

4’’ base, 4’’ handle229-106229-121

3-1/2’’ base, 4-5/16’’ handleS/SZinc

221-901 BlackPart Finish

6-1/4’’ C.-C., 7-1/2’’ O.D.221-911 9-3/4’’ C.-C., 11’’ O.D.Black

221-901

229-106

220-821

229-121

221-521

Specifications

221-521 18.31’’BlackPart Finish Specifications



C

M

J

CM

MJ

CJ

CMJ

N

p12EN.pdf 1 2013-05-06 11:50:18


“L, T” Handles


220-503 Chrome Locking, front mount, dust shutter, with gasket, 1-1/2’’ c.c., 3’’ shaft220-507 Chrome Non-locking, front mount, with gasket, 1-1/2’’ c.c., 3’’ shaft220-509 Chrome Non-locking, front mount, with gasket, 1-3/4’’ c.c., 3’’ shaft220-905 Chrome Interior handle, 4-1/8’’, for 5/16’’ shaft220-911 Zinc Inside handle with set screw, 5-1/2’’, for 5/16’’ shaft223-101 Chrome Locking, no dust shutter, 1-1/2’’ c.c., 4’’ shaft223-103 Chrome Locking, no dust shutter, 1-3/4’’ c.c., 4’’ shaft223-105 Chrome Locking, no dust shutter, free rotation when locked, 1-1/2’’ c.c., 4’’ shaft

223-121 Chrome Non-locking, 1-3/4’’ c.c., 4’’ shaft223-111 Chrome Locking, no dust shutter, blind mount, 1-13/16’’ c.c., 4’’ shaft

220-501 Chrome Locking, front mount, dust shutter, with gasket, 1-3/4’’ c.c., 3’’ shaft


T-Handles

L-Handles

223-203 Chrome Locking, no dust cover, 1-1/2’’ c.c., 4’’ shaft223-205 Chrome Locking, with dust cover, 1-1/2’’ c.c., 4’’ shaft223-207 Chrome Locking, no dust cover, 1-3/4’’ c.c., 4’’ shaft223-221 Chrome Non-locking, 1-1/2’’ c.c., 4’’ shaft

223-201 Steel black Locking, with dust cover, 1-1/2’’ c.c., 4’’ shaft

220-503 220-507 220-905 223-101

223-103 223-105 223-111 223-121

223-201 223-203 223-205 223-207 223-221

2230-521


Latch

230-521 Zinc Adjustable Latch with screw for 5/16'' square shank

C

M

J

CM

MJ

CJ

CMJ

N

p13EN.pdf 1 2015-11-19 10:21:39

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Piano Hinges

14

210-201

Part Lenght Width Thickness Pin diameter Rod material Knuckles

210-105 72’’210-111 72’’

72’’72’’72’’

72’’72’’72’’

73.5’’

1-1/16’’1-1/2’’2’’2’’2’’

3’’3’’5’’

2’’

0.042’’0.060’’0.060’’0.060’’0.072’’

0.072’’0.078’’0.125’’

0.090’’

0.091’’0.120’’0.187’’0.187’’0.250’’

0.250’’0.250’’0.375’’

0.250’’

SteelSteelSteelBrassSteel

SteelBrassSteel

Brass

1/2’’1/2’’1’’1’’1’’

1’’1’’2’’

1-3/4’’

210-203210-205210-207210-301210-303210-501

213-105

213-101 72’’213-103 72’’

72’’72’’72’’

96’’84’’

1-1/16’’1-1/2’’1-1/2’’2’’2’’

3’’3’’

0.035’’0.035’’0.060’’0.060’’0.060’’

0.072’’0.060’’

0.086’’0.086’’0.120’’0.120’’0.187’’

0.250’’0.187’’

S/SS/SS/SS/SS/S

S/SS/S

1/2’’1/2’’1/2’’1/2’’1’’

1’’1’’

213-201213-205213-301213-303

Steel piano hinges

212-303

212-101 72’’212-201 72’’

72’’

1-1/2’’2’’3’’

0.041’’0.064’’0.064’’

0.091’’0.120’’0.125’’

AluminumAluminumAluminum

1/2’’1/2’’1/2’’

Aluminum piano hinges

Stainless Steel piano hinges

203-251 Plain steelPlain steel

1/2” pin, 3-3/4”, type P203-261 1/2” pin, 4”, type PPlain steel203-271 Plain steel 1/2” pin, 4-1/2”, type P203-283 1/2” pin, 2-1/2”, Knurled PinPlain steel

203-201


3/8” pin, 4”, type OAluminum203-001 1/2" pin, 4,75" x 5,00" x 0,188"

Plain steel weld-on hinges

203-706 Plain steelPlain steel

5-1/4’’ with grease fitting203-701 3-1/4’’ with grease fitting



- Other models available. contact us for more details



202-201, 203-251 203-261, 203-271 203-283

203-701, 203-706203-001

C

M

J

CM

MJ

CJ

CMJ

N

p14EN.pdf 1 2015-11-19 11:18:01


- 215-244 - - 260 mm 10” 10

Weld-on Hinges

15

215-217

215 Series|Profile (Steel), Pin (Steel), Washers (Brass)

DimensionsGrease Fitting Brass PinSteel Pin Grease Fitting

218-100 218-200

218 Series|Profile(S/S), Pin(S/S), Washers(S/S)

DimensionsS/S 304

215-100216-100

215-200216-200

215-101215-104215-109215-112

215-120

215-133

215-125215-128

215-136215-141

215-117215-220

215-233

215-225215-228

215-236215-241

216-101

216-109216-112

216-120

216-133

216-125216-128

216-136216-141

216-117

216-104

--

--

216-217216-220

216-233

216-225216-228

216-236216-241

--

--

80 mm100 mm

150 mm

120 mm135 mm

180 mm200 mm

70 mm60 mm

40 mm50 mm

3-3/16”4”

6”

4-3/4”5-1/4”

7”8”

2-3/4”2-3/8”

1-9/16”2”

218-109

218-120

218-133218-125

218-136

218-117

218-141

Box Qty.

2020

2020

101010

Box Qty.

2020

2020

20202010101010

216 Series|Profile (Steel), Pin (Brass), Washers (Brass)

mm ADimension (’’) B C D I

10’’260 28 32 129 19 -

7’’180 20 25 88,6 14 -

5-1/4’’135 18 22 66,3 12 -

4’’100 16 20 48,9 10 -

2-3/4’’70 11,5 13,5 34,1 6 -

2’’50 8 9,5 24 5 -

8’’200 23 28,5 98,5 16 -

6’’150 20 25 73,6 13 -

4-3/4’’120 16 20 58,9 11 -

3-3/16’’80 13 15,5 39,1 8 -

2-3/8’’60 10 12 29 6 -

1-9/16’’40 8 9,5 19 5 -

C D

I

A

B

C

60 mm 2-3/8”80 mm 3-3/16”100 mm 4”120 mm 4-3/4”150 mm 6”180 mm 7”200 mm 8”

C

M

J

CM

MJ

CJ

CMJ

N

p15EN.pdf 1 2015-11-19 13:12:37

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Weld-on Hinges

16

915-217

915 Series|Profile (Steel), Pin (Steel), Washers (Brass)

DimensionsGrease Fitting Brass PinSteel Pin Grease Fitting

917-100 917-200

918-100

917 Series|Profile(Aluminum), Pin(S/S), Washers(S/S)

918 Series|Profile(S/S), Pin(S/S), Washers(S/S)DimensionsGrease Fitting S/S 304 Aluminum

915-100916-100

915-200916-200

915-101915-104915-109915-112

915-120

915-133

915-125915-128

915-136915-141

915-117915-220

915-233

915-225915-228

915-236915-241

916-101

916-109916-112

916-120

916-133

916-125916-128

916-136916-141

916-117

916-104

-

-

-

--

916-217916-220

916-233

916-225916-228

916-236916-241

-

-

-

--

80 mm100 mm

150 mm

120 mm135 mm

180 mm200 mm

70 mm60 mm

40 mm50 mm

3-3/16”4”

6”

4-3/4”5-1/4”

7”8”

2-3/4”2-3/8”

1-9/16”2”

917-109

917-120

917-133917-125

917-136917-141

917-117917-220

917-233917-236917-241

917-225

917-217- -

918-120

918-133918-125

918-136

918-117

918-141

Box Qty.

2525

5025

252525

Box Qty.

5025

5050

252525252525

915-144 915-244 260 mm 10-1/4” 2525

916 Series|Profile (Steel), Pin (Brass), Washers (Brass)

mm ADimension (’’) B C D I

10’’260 28 32 129 19 72

7’’180 20 25 88 13 40

5-1/4’’135 18 22 65,5 10 35

4’’100 16 20 48,5 7 30

2-3/4’’70 11,5 13,5 33,8 5,5 20

2’’50 8 10 24 5 15

8’’200 23 29 98 14 43

6’’150 20 25 73 13 35

4-3/4’’120 16 20 58,5 9 30

3-3/16’’80 13 16 38,8 6 22

2-3/8’’60 10 12 29 6 20

1-9/16’’40 8 10 19 5 15

C D

I

A

B

C

60 mm 2-3/8”80 mm 3-3/16”

100 mm 4”120 mm 4-3/4”150 mm 6”180 mm 7”200 mm 8”

C

M

J

CM

MJ

CJ

CMJ

N

p16EN.pdf 1 2015-11-19 13:19:03


Stainless Steel Strap Hinge

Strap Hinges

202-251 S/S 304

S/S 304

3.15”, square holes202-253 3.15”, square holesS/S 304202-255 S/S 304 4.92”, square holes202-257 4.92”, square holesS/S 304202-261 3.50”, square holesS/S 304

S/S 304202-265 5.00”, square holes

202-120Part Finish Specifications

4.75”

202-251, 202-253202-255, 202-257

202-261, 202-265

202-120

Stainless Steel hinges

202-221 S/S 304S/S 304

4.13’’202-231 4.50’’S/S 304202-241 S/S 304 4.25’’

202-301 5.50’’S/S 304

202-211 2.36’’ x 2.32’’, 4mm thickness

204-806 S/S 304S/S 304

259mm x 81mm, square butt204-821 321mm x 85mm, standard buttS/S 304204-826 S/S 304 321mm x 85mm, square butt204-841 327mm x 85mm, standard buttS/S 304204-846 327mm x 85mm, square buttS/S 304

204-801 259mm x 81mm, standard butt

Stainless Steel Heavy Duty Hinges

202-211

202-241

204-841

202-221 202-231

202-301

17

204-801

204-821

204-846

204-508

204-806

204-826

204-508 8.2’’ x 2’’S/S 304Part Finish Specifications


C

M

J

CM

MJ

CJ

CMJ

N

p17EN.pdf 1 2013-10-07 14:51:13

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Strap Hinges

18

Aluminum204-418 8’’, 3 holes butt, 270°Aluminum204-412 Aluminum 12’’, 270°204-728 16’’Aluminum


3.75’’

Aluminum strap hinges

204-901 ZincZinc

5’’, right, Eberhard 5867-E1202-601 8.75’’, heavy-duty, Eberhard 5884Zinc

202-216 2.36’’ x 2.32’’, 4mm thickness

Zinc plated hingesPart Finish Specifications

204-112 ZincZinc

12’’, standard butt204-116 16’’, standard buttZinc

ZincZincZinc

204-308 8’’, 3 holes butt204-312 12’’, 3 holes butt204-316 16’’, 3 holes butt


8’’, standard butt

Zinc plated strap hinges

204-404

204-412 204-728

204-418

202-216

202-601

202-901

204-108 204-308

C

M

J

CM

MJ

CJ

CMJ

N

p18EN.pdf 1 2013-10-07 15:04:48


Latches and Bolts

19

Latches


1/2” pin, 6.300” O.D.

1/2” pin, 8.750” O.D.

240-103240-106240-111

240-151

ZincZincZinc

1/2” pin, 6.300” O.D.1/2” pin, 4” handle - 6.30”

3/8” pin, 5.125” O.D.

S/S240-106

240-151

240-101

242-101 Rubber + zinc 2-1/2”

3-1/2”

242-106242-111242-116242-131

Rubber + zincRubber + S/SRubber + zinc

2-1/2”3-1/2”

5”

Rubber + S/S

242-136242-141242-151

Rubber + S/SRubber + zincRubber + zinc

5”6”8”--

242-101

242-131

242-141

242-151

242-181242-191

Steel, blackSteel, black

242-181 242-191

240-121Zinc

5/8” pin, 9.500” O.D.

Catch & striker

241-101 Zinc Straight baseStriker241-401 Zinc

241-101 241-401

240-306 2” x 1.62”, 4 holesZinc240-121

240-111

240-306

Hood latches

410-201 Zinc PlatedPart Finish Specifications

410-205410-207410-211

Plain steelPlain steel

5/8”, W.L.L. 6 000 lbs., B.S. 18 000 lbs.3/4”, W.L.L. 8 833 lbs., B.S. 26 500 lbs.1”, W.L.L. 15 586 lbs., B.S. 46 760 lbs.

Plain steel

Forged D-ring with bracket

1/2”, W.L.L. 3 666 lbs., B.S. 11 000 lbs.410-203 Plain steel 1/2”, W.L.L. 3 666 lbs., B.S. 11 000 lbs.



410-091 Zinc


1200 lbs., 4’’

5000 lbs., 4-1/2’’ x 4-7/8’’

410-101

410-111410-121410-131

ZincZincZinc

1200 lbs., 3-1/2’’ x 5’’

2000 lbs., 3-3/4’’ x 4’’

6000 lbs., 6-1/4’’ dia.

Zinc410-106 1200 lbs., 3-1/2’’ x 5’’Zinc

410-021 400 lbs., ins. dia. 1-1/2’’Zinc410-091410-021 410-101,

410-106

Tie Downs

410-213 Plain steel 1”, W.L.L. 15 333 lbs., B.S. 46 000 lbs.

410-121410-111 410-131

410-201 410-203, 410-205 410-207

410-211 410-213

C

M

J

CM

MJ

CJ

CMJ

N

p19EN.pdf 1 2015-11-20 10:33:32

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Latches and Bolts

20

465-100 Zinc Replacement S-hooks465-109465-115465-121

RubberRubber

9”15”

465-131465-141

RubberRubberRubber

21”31”41”

Tarp StrapsPart Finish Specifications


3.5”, locking

3.5”, non-locking

243-106243-111243-116

243-121

ZincS/S

Zinc

3.5”, locking3.5”, non-locking

Striker for 3.5”

S/S

243-126243-131243-136

S/SZincS/S

Striker for 3.5”Striker for 3.5”Striker for 3.5”

243-141 Zinc 4.7”, locking243-146

243-161 Zinc

4.7”, locking

Striker for 4.7”Striker for 4.7”

S/S

243-166 S/S

243-171 Zinc 6.4”, locking243-176

243-191 Zinc

6.4”, locking

Striker for 6.4”Striker for 6.4”

S/S

243-196 S/S

2”, 2 holes 0.20’’ dia.410-306410-321 Zinc

3”, 2 holes 0.26’’ dia.Zinc

410-321

J-Hooks

240-201 Zinc 9-3/8’’, ext. 10-3/8’’ max240-221 8-3/4’’, ext. 9-1/2’’ maxZinc

Over center latches

Adjustable Latches

Strikers for adjustable latches

243-111, 243-116

243-121243-126

243-131243-136

243-161243-166

243-171, 243-176

243-191243-196

240-201 240-221

203-801 Zinc Left, 3’’203-806 Right, 3’’Zinc203-821 EyeZinc

Rack Fastener

410-306

243-141, 243-146

243-101, 243-106

203-821203-801





465 Serie

C

M

J

CM

MJ

CJ

CMJ

N

p20EN.pdf 1 2013-10-07 15:15:01


Drawer Slides

21

B

A

323-110 10’’ 1.85’’ 0.500’’323-112 12’’ 1.85’’ 0.500’’323-114 14’’ 1.85’’ 0.500’’323-116 1.85’’ 0.500’’323-118 18’’ 1.85’’ 0.500’’323-120 20’’ 1.85’’ 0.500’’323-122 22’’ 1.85’’ 0.500’’323-124 24’’ 1.85’’ 0.500’’323-126 26’’ 1.85’’ 0.500’’323-128 28’’ 1.85’’ 0.500’’

100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs150 lbs150 lbs150 lbs150 lbs150 lbs150 lbs150 lbs150 lbs

Full Extension SlidesPart Lock’in, Lock’out Part Lenght A B Capacity

16’’

323-210 10’’ 1.95’’ 0.500’’323-212 12’’ 1.95’’ 0.500’’323-214 14’’ 1.95’’ 0.500’’323-216 1.95’’ 0.500’’323-218 18’’ 1.95’’ 0.500’’323-220 20’’ 1.95’’ 0.500’’323-222 22’’ 1.95’’ 0.500’’323-224 24’’ 1.95’’ 0.500’’

16’’

250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs

323-310 10’’ 2.09’’ 0.750’’323-312 12’’ 2.09’’ 0.750’’323-314 14’’ 2.09’’ 0.750’’323-316 2.09’’ 0.750’’323-318 18’’ 2.09’’ 0.750’’323-320 20’’ 2.09’’ 0.750’’323-322 22’’ 2.09’’ 0.750’’323-324 24’’ 2.09’’ 0.750’’

16’’

250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs

323-326 26’’ 2.09’’ 0.750’’323-328 2.09’’ 0.750’’323-330 30’’ 2.09’’ 0.750’’323-332 32’’ 2.09’’ 0.750’’323-334 34’’ 2.09’’ 0.750’’323-336 36’’ 2.09’’ 0.750’’

28’’

up to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbs

323-508 8’’ 3.00’’ 0.750’’323-510 10’’ 3.00’’ 0.750’’323-512 12’’ 3.00’’ 0.750’’323-514 3.00’’ 0.750’’323-516 16’’ 3.00’’ 0.750’’323-518 18’’ 3.00’’ 0.750’’323-520 20’’ 3.00’’ 0.750’’323-522 22’’ 3.00’’ 0.750’’

14’’

323-6XX - Lock’in, Lock’out

up to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbs

323-524 24’’ 3.00’’ 0.750’’323-526 26’’ 3.00’’ 0.750’’323-528 28’’ 3.00’’ 0.750’’323-530 3.00’’ 0.750’’323-532 32’’ 3.00’’ 0.750’’323-534 34’’ 3.00’’ 0.750’’323-536 36’’ 3.00’’ 0.750’’323-538 38’’ 3.00’’ 0.750’’

30’’

up to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbs

323-540 40’’ 3.00’’ 0.750’’323-542 3.00’’ 0.750’’323-548

323-612323-614323-616323-618323-620323-622323-624323-626323-628

323-636

323-648 48’’ 3.00’’ 0.750’’323-560

----------------------------------

-

--

---

- 60’’ 3.00’’ 0.750’’

42’’

323-5XX

323-3XX, detachable

323-2XX, detachable

323-1XX, detachable

C

M

J

CM

MJ

CJ

CMJ

N

p21EN.pdf 1 2013-10-07 15:24:02

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Door Holders

22

251-201 Zinc 1.5”, 1.25’’ C.-C.

4.5”, 1.25’’ C.-C.

251-206251-211251-216

251-226

ZincS/SZinc

2.5”, 1.25’’ C.-C.

3.5”, 1.25’’ C.-C.2.5”, 1.25’’ C.-C.

S/S

251-221S/S

1.5”, 1.25’’ C.-C.

251-236251-241

S/SNylon

4.5”, 1.25’’ C.-C.

254-151 Rubber+Plast Kit - 2 pieces

251-171

254-501 Alum. alloy 3’’, gaskets included


4’’ kit251-121 4’’ kitS/S

S/S251-401 Heavy duty 4’’ kit

6’’ kit251-131251-141

251-148

ZincS/SZinc

6’’ kit

10’’ kitReceptacle only with springReceptacle only with spring

251-145S/S

10’’ kit

251-151251-161

ZincS/S

Door holders

251-231

251-243

Zinc

Nylon

3.5”, 1.25’’ C.-C.

White receptacle Black receptacle

Zinc Kit - 3 pieces 251-181 Plain steel -

251-501 S/S Door retainer







251-311251-321 Aluminium

Aluminium2-5/8’’, male3-3/8’’, Receptacle

Aluminium

251-351

2-1/8’’, male

251-121 251-401

251-221 251-241 251-243

251-311, 251-321

254-151

254-501

251-171

251-501

251-351

251-181

C

M

J

CM

MJ

CJ

CMJ

N

p22EN.pdf 1 2015-11-19 14:46:31


Gas Springs

23

281-022 22 lbs (98N) 9.8’’ (250mm) - 6.7’’ (170mm) 3.1’’ (80mm) Plastic, 10 mm281-050 50 lbs (222N) 9.8’’ (250mm) - 6.7’’ (170mm) 3.1’’ (80mm) Plastic, 10 mm281-100 100 lbs (445N) 9.8’’ (250mm) - 6.7’’ (170mm) 3.1’’ (80mm) Plastic, 10 mm

283-013 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm283-035 35 lbs (156N) 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm283-065 65 lbs (289N) 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm283-100 100 lbs (445N) 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm

285-030 30 lbs (142N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm285-013 13 lbs (58N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm

285-060 60 lbs (278N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm

285-120 120 lbs (545N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm285-090 90 lbs (400N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm

287-035 35 lbs (156N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-045 45 lbs (200N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-060 60 lbs (267N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-080 80 lbs (356N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-097 97 lbs (432N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-135 135 lbs (600N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm

289-030 30 lbs (142N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm289-060 60 lbs (278N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm289-090 90 lbs (400N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm289-120 120 lbs (545N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm

293-020 20 lbs (89N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm293-030 30 lbs (133N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm293-060 60 lbs (267N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm293-100 100 lbs (445N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm

291-050 50 lbs (225N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-075 75 lbs (335N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-100 100 lbs (445N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-150 150 lbs (665N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-200 200 lbs (890N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-250 250 lbs (1110N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm

295-087 87 lbs (385N) 26.34’’ (669mm) - 16.10’’ (409mm) 10.24’’ (260mm) Plastic, 10 mm295-120 120 lbs (534N) 26.34’’ (669mm) - 16.10’’ (409mm) 10.24’’ (260mm) Plastic, 10 mm

297-050 50 lbs (225N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-075 75 lbs (335N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-100 100 lbs (445N) 27.875’’ (710mm) - 16,875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-150 150 lbs (665N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-200 200 lbs (890N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-250 250 lbs (1110N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm

Gas springsPart Force Dimension Stroke End Fitting

298-056 56 lbs (249N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm298-079 79 lbs (351N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm298-090 90 lbs (400N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm298-203 203 lbs (902N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm

13 lbs (58N)Part Force Dimension Stroke End Fitting

Part Force Dimension Stroke End Fitting








C

M

J

CM

MJ

CJ

CMJ

N

p23EN.pdf 1 2015-11-19 14:52:52

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Composante pour cylindre à gazArrêt de porte 24

299-036 Zinc 10 mm299-017

Ball Studs

299-001 Plastic 10mm receptacle13mm kit with clip299-011 Zinc

299-013 Zinc 13mm receptacle299-015 Zinc 13mm safety clip

10mm receptacle299-041 Steel

End Fittings

299-101 Zinc 10 mm stud

299-118299-111

299-121

299-141299-146 S/S

299-131

299-151

Brackets

260-101260-151

S/S 11’’, 15 lbs.

Door Checks

260-151260-101

261-108 Zinc 8"Part Finish Specifications

Telescopic props

261-110261-112261-116261-118

299-131299-121

299-118299-111

299-036

299-141

299-101

261-112

10 mm stud

299-166

299-151299-146 299-166

299-017

299-011

299-015

299-001 299-013

299-041

Gas Spring Hardware

24

Zinc 10"Zinc 12"Zinc 16"Zinc 18"

S/S 13’’ with 11" arm, 30 lbs.

Zinc 13 mm

Zinc 10 mm studZinc 10 mm stud, reversibleZinc 10 mm studZinc 10 mm studZinc 10 mm stud

Zinc 10 mm studS/S 10 mm stud





C

M

J

CM

MJ

CJ

CMJ

N

p24EN.pdf 1 2013-10-07 15:35:56


Chains and hooks

25

General Utility ChainHot galvanized of chain reduces W.L.L. by 20%

Self colored Diameter

413-260413-261413-262413-263413-264413-265413-266413-267

1/8”3/16”1/4”5/16”3/8”1/2”5/8”3/4”

Galvanized413-270413-271413-272413-273413-274413-275413-276413-277

Zinc413-280413-281413-282413-283413-284413-285413-286413-287

Inside diameter

0.25’’ x 0.69’’0.33’’ x 0.97’’0.43’’ x 1.14’’0.50’’ x 1.24’’0.57’’ x 1.35’’0.75’’ x 1.70’’0.89’’ x 2.60’’1.10’’ x 2.63’’

W.L.L.

325 lbs.630 lbs.

1100 lbs.1900 lbs.2650 lbs.4500 lbs.6900 lbs.

10600 lbs.

Transport ChainGrade 70

Clevis Grab HookGrade 70

Clevis Slip Hook

Eye Slip Tow Hook

Grade 70

Yellow Dichromate413-291413-293413-295413-299

Diameter1/4”5/16”3/8”1/2”

Inside diameter

0.50’’ x 1.00’’0.48’’ x 1.12’’0.57’’ x 1.20’’0.75’’ x 1.70’’

W.L.L.

413-201 1/4”Part Chain type

3150 lbs.413-203413-205413-209

5/16”3/8”1/2”

4700 lbs.6600 lbs.

11300 lbs.

3150 lbs.4700 lbs.6600 lbs.

11300 lbs.

413-211 1/4”Without latch Chain type W.L.L.

W.L.L.

2750 lbs.413-221With latch

413-213413-215413-217413-219

413-223413-225413-227413-229

5/16”3/8”7/16”1/2”

4300 lbs.5250 lbs.6600 lbs.9000 lbs.

413-191 5/8”Part Eye diameter W.L.L.

800 lbs.1/2”Opening

413-193 3/4” 5/8” 1500 lbs.413-193413-191

413-221413-211

413-201

413-260

413-291C

M

J

CM

MJ

CJ

CMJ

N

p25EN.pdf 1 2013-05-06 11:44:15

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Hooks and chain hardware

26

Part W.L.L.

413-171413-173413-175413-177413-179413-181413-183413-185413-187

1500 lbs.2000 lbs.3000 lbs.4000 lbs.6000 lbs.9000 lbs.

14000 lbs.22000 lbs.30000 lbs.

Eye slips hook with latchAlloy

Lap links

Quick links

Screw Pin Anchor Shackles

Zinc

Galvanized steel

413-171

413-400

Zinc

413-421413-423413-425413-427413-429413-431413-433

Breaking strength

200 lbs.600 lbs.


S/S

413-435413-437413-439413-441413-443

-413-445

Size (inch)

1/8"3/16"1/4"5/16"3/8"7/16"1/2"

Part Chain Dia. x I.D.

413-401413-403413-405413-409

1/4" x 1-1/2"5/16" x 1-1/2"3/8" x 2"1/2" x 2-1/2"

Breaking strength


-5500 lbs.

Size (mm)

3 mm5 mm6 mm8 mm10 mm11 mm12 mm

Non rated

414-501414-503414-505414-507414-509414-511414-513

Rated Size W.L.L.

414-515414-517414-519

-----

414-521414-523414-525414-527414-529414-531414-533414-535414-537414-539414-541414-543414-545414-547414-549

3/16”1/4”5/16”3/8”7/16”1/2”5/8”3/4”7/8”1”1-1/8”1-1/4”1-3/8”1-1/2”1-3/4

660 lbs.1000 lbs.1500 lbs.2000 lbs.3000 lbs.4000 lbs.6500 lbs.9500 lbs.

13000 lbs.17000 lbs.19000 lbs.24000 lbs.27000 lbs.34000 lbs.50000 lbs.

413-400 3/16" x 1"

413-421

414-501

C

M

J

CM

MJ

CJ

CMJ

N

p26EN.pdf 1 2013-05-06 11:49:13


Quick PinsTrailer hardware

27

5/16’’ x 1-3/8’’5/16’’ x 1-3/4’’3/8’’ x 1-3/8’’

418-101Part Specifications

418-103418-104

1/4’’ x 1-3/8’’

418-105

1/4’’ x 1-3/4’’418-102

Quick PinsRound, zinc

3/8’’ x 2-1/4’’3/8’’ x 2-1/2’’

418-111

418-113418-114

1/4’’ x 2-1/2‘’5/16’’ x 2-1/2’’418-112

Quick PinsSquare, zinc

5/16’’ x 1-9/16’’, 1-1/4’’ usable3/8’’ x 1-3/4’’, 1-7/16’’ usable

418-121

418-123418-124

7/16’’ x 1-9/16’’, 1-11/32’’ usable7/16’’ x 1-3/4’’, 1-1/2’’ usable

418-125418-126

3/16’’ x 1-9/16’’, 1-1/4’’ usable1/4’’ x 1-9/16’’, 1-1/4’’ usable418-122

Lynch PinsRound, zinc

3/4’’ x 4-1/4’’

418-131

418-1343/4’’ x 6-1/4’’7/8’’ x 6-1/4’’

418-135418-136

1’’ x 6-1/4’’1-1/8’’ x 6-1/4’’

418-137

1-1/4’’ x 6-1/4’’418-139418-138

1/2’’ x 4-1/4’’5/8’’ x 4-1/4’’418-132

Hitch pinsZinc

400-109 2’’ x 2-1/2’’, 3500 lbs400-111 2’’ x 3’’, 3500 lbsZinc

Zinc

Trailer CouplingSAE Class II

Part Specifications

Part Specifications

Part Specifications

SpecificationsFinishPart

418-101

418-111

418-121

418-131

400-109 400-111

C

M

J

CM

MJ

CJ

CMJ

N

p27EN.pdf 1 2015-11-19 14:58:13

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Adhesives and Sealants

28

White575-752 75-AM, High performance, 30 un. / boxAluminum gray575-753 Black 75-AM, High performance, 30 un. / box

575-758* Yellow bus 75-AM, High performance, 30 un. / box575-754 75-AM, High performance, 30 un. / boxColonial White

575-751Part Color Specifications

75-AM, High performance, 30 un. / box

White575-252 25-AM, Fast cure, 36 un. / boxAluminum gray575-253* Black 25-AM, Fast cure, 36 un. / box

575-251 25-AM, Fast cure, 36 un. / box

Adhesives/sealants Polyurethane

White575-652 65-A, High capacity, 36 un. / boxAluminum gray

580-122 65-H, Durable for roof, 4 un. / boxAluminum gray575-653* Black 65-A, High capacity, 36 un. / box

575-651 65-A, High capacity, 36 un. / box

Adhesives/sealants Neoprene

White575-502* 501-A, General purpose, 36 un. / boxGray575-503 Black 501-A, General purpose, 36 un. / box

575-501* 501-A, General purpose, 36 un. / box

White590-201* Butyl in rolls, 1/16’’ x 1/4’’ x 100’ , 16 rl. / boxGris

590-211 Butyl in rolls, 1/16’’ x 3/4’’ x 100’ , 16 rl. / boxGris

590-101* For roofs, 4’’ x 50’ , 8 rl. / boxAluminum gray

590-206* Gris Butyl in rolls, 1/16’’ x 1/2’’ x 100’ , 16 rl. / box

590-106 For roofs, 4’’ x 50’ , 8 rl. / box

590-216 Gris Butyl in rolls, 1/16’’ x 1’’ x 100’ , 12 rl. / box

Gris590-261* Butyl in rolls, 1/8’’ x 3/4’’ x 60’ , 16 rl. / boxGris

590-361 Butyl in rolls, 1/8’’ x 3/4’’ x 60’ , 16 rl. / boxBlack

590-251* Butyl in rolls, 1/8’’ x 1/2’’ x 60’ , 20 rl. / boxGris

590-266* Gris Butyl in rolls, 1/8’’ x 1’’ x 65’ , 16 rl. / box

590-256 Butyl in rolls, 1/8’’ x 5/8’’ x 65’ , 16 rl. / box

Adhesives/sealants Butyl

White575-732 73-A, Silicone 100%, 24 un. / boxAluminum gray

575-735 73-A, Silicone 100%, 24 un. / boxClear575-733 Black 73-A, Silicone 100%, 24 un. / box

575-731 73-A, Silicone 100%, 24 un. / box

Adhesives/sealants Silicone

575-251

575-731

575-651

575-501

590-201

575-751

580-122

590-101* Minimum order, 1 box

* Minimum order, 1 box

* Minimum order, 1 box

Part Color Specifications



C

M

J

CM

MJ

CJ

CMJ

N

p28EN.pdf 1 2015-11-19 15:09:25


Rubber FendersEdge Trims

29

50 feet - 1/4’’ thick100 feet - 3/16’’ thick

653-101Part Specifications

Rubber fenders

653-121

52 feet - 1/4’’ thick

653-141

100 feet - 3/16’’ thick653-111

652-601

Edge trim

Double lips, 1/8’’

Bulb on top, 1/8’’

652-101

652-806

Bulb on side, 1/8’’Bulb on side, 1/4’’652-201

Bulb on top (small), 1/8’’652-811

Edge trims with bulb

653-101

653-121

652-601

652-101 652-201

652-806 652-811

653-111

653-141

11/32’’

1/16’’

17/3

2’’

1/8’’9/32’’

3,5’’ 2,25’’

3/16’’

5,75’’

3/16’’

2,25

’’

2,25’’

0,25’’

1,56

’’

4,50’’

1,50’’

2,50

’’3/16’’

1’’

19/32’’13/32’’

1/8’’

19/3

2’’

1/8’’

1-3/32’’21/32’’7/16’’

5/8’

’

1/4’’

19/3

2’’ 1/

8’’

17/32’’

3/4’

’

1/8’’

1/8’’

1-7/

32’’

1/8’’

1/16’’

3/8’

’

13/32’’

29/3

2’’

Part Specifications

Part Specifications

- More models available, visit www.jimexs.com

- More models available, visit www.jimexs.com

C

M

J

CM

MJ

CJ

CMJ

N

p29EN.pdf 1 2013-05-06 11:44:04

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625 30

Part Width Length Rolls / box Thickness675-111 1/2’’675-126 1’’

100’100’

2412 1/16’’

1/16’’

675-206 3/8’’675-211 1/2’’

50’50’

3224 1/8’’

1/8’’

675-221 3/4’’675-226 1’’

50’50’

1612 1/8’’

1/8’’

675-236 1-1/2’’675-241 2’’

50’50’

86 1/8’’

1/8’’

675-306 3/8’’675-311 1/2’’

50’50’

3224 3/16’’

3/16’’

675-321 3/4’’675-326 1’’

50’50’

1612 3/16’’

3/16’’

675-336 1-1/2’’ 50’ 8 3/16’’

675-406 3/8’’675-411 1/2’’

37,5’37,5’

3224 1/4’’

1/4’’

675-421 3/4’’675-426 1’’

37,5’37,5’

1612 1/4’’

1/4’’

675-436 1-1/2’’ 37,5’ 8 1/4’’675-441 2’’ 37,5’ 6 1/4’’675-451 3’’ 37,5’ 4 1/4’’

675-521 3/4’’675-526 1’’

30’30’

1612 5/16’’

5/16’’

675-536 1-1/2’’ 30’ 8 5/16’’

675-611 1/2’’675-621 3/4’’

25’25’

2416

675-641 2’’ 25’ 6675-626 1’’ 25’ 12

675-911 1/2’’675-921 3/4’’

12,5’12,5’

2416 3/4’’

675-936 1-1/2’’ 12,5’ 8 3/4’’

3/4’’

675-926 1’’ 12,5’ 12 3/4’’

675-711 1/2’’675-726 1’’

25’25’

2416 1/2’’

1/2’’

675-736 1-1/2’’ 25’ 12 1/2’’

675-821 3/4’’ 12,5’ 16 5/8’’

Weatherstrips

Weatherstripping

Part Width Length Rolls / box Thickness








3/8’’

3/8’’

3/8’’

3/8’’

675-XXX Series1 adhesive side, closed cell

C

M

J

CM

MJ

CJ

CMJ

N

p30EN.pdf 1 2015-11-19 15:14:49


Rubber Bumpers

31

612-111

611-151

610-127

610-046610-102 610-014

610-053

610-007

610-092

610-053 4-3/4’’ 3-1/16’’ 3-3/4’’610-127 6’’ 2-3/4’’ 3-1/4’’610-102 6’’ 4’’ 3-3/8’’610-046 3’’ 3-1/4’’611-151 7-5/8’’ 2-1/4’’ 2’’610-007 7-7/8’’ 2-5/8’’ 2-1/4’’612-111 8-1/16’’ 5-1/2’’ 3-1/2’’610-092 8-3/8’’ 1-15/16’’ 1-15/16’’610-014 16’’ 2’’ 2’’

1/2’’1/2’’1/2’’1/2’’3/8’’3/8’’1/2’’5-11/32’’3/8’’

2-1/2’’2-1/2’’2-1/2’’3-5/16’’4-3/4’’4-1/2’’5-1/2’’5’’6-1/2’’

Rubber bumpersPart Lenght Width Height Holes Diameter Center - Center

7-3/4’’

625-008 8’’ 4-1/2’’ 3-3/4’’625-012 12’’ 4-1/2’’ 3-3/4’’625-022 22’’ 4-1/2’’ 3-3/4’’625-096 96’’ 4-1/2’’ 3-3/4’’625-106 6’’ 4’’ 3-7/8’’

----

2 holes 5/8’’, 3-1/8’’ C.-C.

ExtrusionsPart Lenght Width Height Specifications

Série 625

607-101 1’’ 13/16’’ 1/8’’607-111 1’’ 1’’ 5/32’’607-341 2-1/2’’ 1’’ 3/8’’607-351 1-1/4’’ 1-7/8’’ 3/8’’

----

Bumper stoppersPart External Diameter Height Hole Specifications

607-101 607-111

607-341 607-351

612-131 612-141

612-501

612-521 612-551612-541

612-161

612-131 8-1/2’’ 7-5/8’’ 5-5/8’’612-141 9-1/2’’ 6-1/4’’ 7-1/4’’612-161 9-1/4’’ 3-7/8’’ 3-3/4’’612-501 8’’ 8-1/2’’ 15-1/4’’612-521 7-3/4’’ 8-1/2’’ 12’’612-541 7’’ 6-3/16’’ 12-1/8’’612-551 - - -

RubberRubberRubberAluminumAluminumAluminumHolder for 612-501

Wheel ChocksPart Lenght Width Height Specifications

C

M

J

CM

MJ

CJ

CMJ

N

p31EN.pdf 1 2015-11-19 15:17:18

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Mud FlapsFloor Hardware

32

Part Thickness Width Grooves

680-501 1/8’’680-506 1/8’’

36’’36’’

WideNarrow

680-511 1/8’’680-516 1/8’’

48’’48’’

WideNarrow

680-521 1/4’’ 36’’ Wide

Floor mattings

Part Height Width Thickness

680-301 12’’680-331 12’’

12’’12’’

3/4’’9/16’’

Interlocking PVC Tiles

Sold per yard (3 feet), 25 yards roll

Part Thickness Width Height

626-124 1/4’’626-130 1/4’’

24’’24’’

24’’30’’

626-136 1/4’’ 24’’ 36’’

Mud flaps

Ultra-resistant acrylic


Part Width Lenght Adhesive

940-101 1’’940-102 2’’

60’60’


940-104 4’’940-106 6’’

60’60’


940-112 12’’ 60’ Ultra-resistant acrylic

Anti-skid tapes with adhesive

626-124

Mud flap holders

626-00X

Rainure étroiteRainure large

940-106

940-112

940-101

Specifications

626-001 for 24’’ mud flap626-003 for 24’’ mud flapChrome

ZincPart Finish

680-331680-301

C

M

J

CM

MJ

CJ

CMJ

N

p32EN.pdf 1 2015-11-19 15:21:05


Miscellaneous

901-151 ZinguéPart Finish Specifications

Folding steps

901-161 Galvanized901-201 Aluminum

6-1/2’’ wide, 4’’ C.-C. holes6-1/2’’ wide, 4’’ C.-C. holes6-3/4’’ x 8-1/2’’, Chrome finish


Document holders

707-121 Aluminum707-151 Plastic

9’’ x 1-5/8" (tube), 5-3/4’’ x 4’’6’’ diameter8-1/2’’W x 13-1/2’’H x 1-1/2’’D


Placard holders

801-003 Aluminum801-021 White Alu.

S/S offset clip - RegularS/S offset clip - "Split"S/S offset clip - Regular

801-023 White Alu.801-731 S/S

S/S offset clip - "Split"Offset clip only

Finish

801-001 801-003

707-101 707-121

901-151 901-201901-161

707-151

Roll-up door cables


Receptacle for neck fuel tank

6-3/16’’, 2-1/4’’

707-201

Galvanized Stainless Steel Lenght

110”115”120”125”130”

905-101905-103905-106905-151

6’’ Size

905-121905-123905-126

-

Yellow ZincZincNylonSteel

Roll-up door rollers2-1/2’’ Size

905-101, 905-121

905-106, 905-126

905-103, 905-123

905-151

905-3XX 905-2XX

905-210905-215905-220905-225905-230

905-310905-315905-320905-325905-330

C

M

J

CM

MJ

CJ

CMJ

N

p33EN.pdf 1 2015-11-19 15:30:03

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625 34

750-001 Plastic Flettner TCX-2 - black750-006 Plastic Flettner TCX-2 - narrow base - black750-021

750-101 Plastic

Flettner TCX-2 - white

Flettner 2000 - black

Plastic

750-141 Plastic Adaptor for Flettner 2000


Specifications

Finish trim - plastic752-201 Aluminum Low profile752-211 Aluminum Black plastic handle

750-041 Plastic Adaptor for Flettner TCX

Air vents

805-462 8.25’’Part Lenght Width Height

805-504 19.17’’805-529 19.17’’

8.16’’7.50’’7.50’’

8.60’’8.25’’8.25’’

5.8A, 21 000 BTU, bottom connection11.6A, 42 000 BTU, rear connection11.6A, 42 000 BTU, tbottom connection

Heaters 12V


with shutter801-906 Aluminum without shutter801-951 Aluminum with screen, 1’’801-952 Aluminum with screen, 1-1/2’’801-953 Aluminum with screen, 2’’801-954 Aluminum with screen, 2-1/2’’801-955 Aluminum with screen, 3’’

801-957 Aluminum with screen, 6’’801-956 Aluminum with screen, 4’’

Louvered vents

Flettner Ventilators

Ventilation, Heating


750-001

801-90X801-95X

750-101

805-462 805-504

805-529

752-101

C

M

J

CM

MJ

CJ

CMJ

N

p34EN.pdf 1 2015-11-19 15:31:55


Aluminum Rivets

Part D Grip Range

501-602501-603501-604501-606

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

3/16’’ (4.8 mm)

3/16’’ (4.8 mm) 501-608501-610

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

501-612501-614501-616501-618

3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

0.126’’ - 0.250’’ (3.2mm - 6.4mm)501-802501-804501-806

1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)

1/4’’ (6.4 mm)

1/4’’ (6.4 mm)501-808501-810

1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)

501-812501-814501-816

1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)

0.476’’ (12.1 mm)L

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)0.571” (14.5 mm)

0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)

0.728” (18.5 mm)

1.228” (31.2 mm)1.354” (34.4 mm)1.480” (37.6 mm)

L

D

0.190’’ - 0.250’’ (4.8mm - 6.4mm)

0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)

Aluminum 5056 blind rivets



Steel mandrel, open end

506-602506-603506-604506-606

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

3/16’’ (4.8 mm)

3/16’’ (4.8 mm) 506-608506-610

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

506-612506-802506-804506-806

3/16’’ (4.8 mm) 1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.501’’ - 0.625’’ (12.7mm - 15.9mm)506-808506-810 1/4’’ (6.4 mm)

0.376’’ - 0.500’’ (9.5mm - 12.7mm)1/4’’ (6.4 mm)

0.346’’ (8.8 mm)

0.531’’ (13.5 mm)0.602’’ (15.3 mm)0.720’’ (18.3 mm)

0.465’’ (11.8 mm)

0.839’’ (21.3 mm)0.976’’ (24.8 mm)0.406’’ (10.3 mm)0.531’’ (13.5 mm)0.661’’ (16.8 mm)0.780” (19.8 mm)0.917” (23.3 mm)

0.190’’ - 0.250’’ (4.8mm - 6.4mm)

0.062’’ - 0.125’’ (1.6mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)


Steel mandrel, end hollow

505-603505-604505-606505-608

3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

505-610505-612

3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

505-614505-616505-618

3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)

0.190’’ - 0.250’’ (4.8mm - 6.4mm)0.126’’ - 0.125’’ (3.2mm - 4.8mm)


Steel mandrel, large open end

L

D

Open end

End hollow

Part D Grip Range L

Part D Grip Range L

C

M

J

CM

MJ

CJ

CMJ

N

p35EN.pdf 1 2013-05-06 11:43:45

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Aluminum Rivets

L

D

Open end

36

Part D Grip Range

511-602511-603511-604511-606

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

3/16’’ (4.8 mm)

3/16’’ (4.8 mm) 511-608511-610

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

511-612511-614511-616511-618

3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

0.126’’ - 0.250’’ (3.2mm - 6.4mm)511-802511-804511-806

1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)

1/4’’ (6.4 mm)

1/4’’ (6.4 mm)511-808511-810

1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)

511-812511-814511-816

1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)

0.476’’ (12.1 mm)L

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)0.571” (14.5 mm)

0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)

0.728” (18.5 mm)

1.228” (31.2 mm)1.354” (34.4 mm)1.480” (37.6 mm)

0.190’’ - 0.250’’ (4.8mm - 6.4mm)

0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)




Aluminum alloy mandrel, open end

515-603515-604515-606515-608

3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

515-610515-612

3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

515-614515-616515-618

3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)

0.190’’ - 0.250’’ (4.8mm - 6.4mm)0.126’’ - 0.125’’ (3.2mm - 4.8mm)


Aluminum alloy mandrel, large open endPart D Grip Range L

C

M

J

CM

MJ

CJ

CMJ

N

p36EN.pdf 1 2013-05-06 11:48:39


Stainless Steel Rivets

Part D Grip Range

521-602521-603521-604521-606

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

3/16’’ (4.8 mm)

3/16’’ (4.8 mm) 521-608521-610

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

521-612521-614

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

0.126’’ - 0.250’’ (3.2mm - 6.4mm)521-802521-804521-806

1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)

1/4’’ (6.4 mm)

1/4’’ (6.4 mm)521-808521-810

1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)

0.476’’ (12.1 mm)L

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)0.571” (14.5 mm)

0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)

0.728” (18.5 mm)

L

D

0.190’’ - 0.250’’ (4.8mm - 6.4mm)

0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)

Stainless steel blind rivetsCarbon steel mandrel, open end

Bout ouvert

531-602531-603531-604531-606

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

3/16’’ (4.8 mm)

3/16’’ (4.8 mm) 531-608531-610

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

531-612531-614

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

0.126’’ - 0.250’’ (3.2mm - 6.4mm)531-802531-804531-806

1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)

1/4’’ (6.4 mm)

1/4’’ (6.4 mm)531-808531-810

1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)

0.476’’ (12.1 mm)

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)0.571” (14.5 mm)

0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)

0.728” (18.5 mm)

0.190’’ - 0.250’’ (4.8mm - 6.4mm)

0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)

Stainless steel blind rivetsS/S mandrel, open end

Part D Grip Range L

C

M

J

CM

MJ

CJ

CMJ

N

p37EN.pdf 1 2013-05-06 11:43:39

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Steel Rivets

38

Part D Grip Range

541-602541-603541-604541-606

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

3/16’’ (4.8 mm)

3/16’’ (4.8 mm) 541-608541-610

3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

541-612541-614541-616541-618

3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm)

0.126’’ - 0.250’’ (3.2mm - 6.4mm)541-802541-804541-806

1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)

0.251’’ - 0.375’’ (6.4mm - 9.5mm)

1/4’’ (6.4 mm)

1/4’’ (6.4 mm)541-808541-810

1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)

541-812541-814541-816

1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)

0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)

0.476’’ (12.1 mm)L

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)0.571” (14.5 mm)

0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)

0.728” (18.5 mm)

1.228” (31.2 mm)1.354” (34.4 mm)1.480” (37.6 mm)

L

D

0.190’’ - 0.250’’ (4.8mm - 6.4mm)

0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)


Carbon steel blind rivets

Carbon steel blind rivets

Carbon steel mandrel, open end

545-603545-604545-606545-608

3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

545-610545-612

3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

545-614545-616545-618

3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)

0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)

0.539’’ (13.7 mm)

0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)

0.190’’ - 0.250’’ (4.8mm - 6.4mm)0.126’’ - 0.125’’ (3.2mm - 4.8mm)


Carbon steel mandrel, large open end

Bout ouvert

Part D Grip Range L

C

M

J

CM

MJ

CJ

CMJ

N

p38EN.pdf 1 2013-05-06 11:48:32


Rivets, Threaded Inserts and Rods

906-014 5/8’’ 3-1/2’’ 14’’906-016 5/8’’ 3-1/2’’ 16’’906-018 5/8’’ 3-1/2’’ 18’’906-020 3-1/2’’ 20’’906-022 5/8’’ 3-1/2’’ 22’’

6’’6’’

906-010 5/8’’ 3-1/2’’ 10’’906-012 5/8’’ 3-1/2’’ 12’’

6’’6’’

6’’6’’6’’

Threaded U-bolts

Rivets

Threaded inserts

Part A B C D

5/8’’

906-205 5/8’’ 20-1/2’’ 3-1/2’’906-185 5/8’’ 18-1/2’’ 3-1/2’’

906-225 5/8’’ 22-1/2’’ 3-1/2’’906-245 5/8’’ 24-1/2’’ 3-1/2’’906-265 26-1/2’’ 3-1/2’’906-285 5/8’’ 28-1/2’’ 3-1/2’’

Threaded straight rodsPart A Lenght D

5/8’’

906-305 5/8’’ 30-1/2’’ 3-1/2’’906-325 5/8’’ 32-1/2’’ 3-1/2’’906-345 34-1/2’’ 3-1/2’’906-365 5/8’’ 36-1/2’’ 3-1/2’’

5/8’’

906-385 5/8’’ 38-1/2’’ 3-1/2’’906-405 5/8’’ 40-1/2’’ 3-1/2’’906-425 42-1/2’’ 3-1/2’’906-445 5/8’’ 44-1/2’’ 3-1/2’’

5/8’’

906-465 46-1/2’’ 3-1/2’’5/8’’

906-000 6’’ x 1-1/2’’ x 1/2’’

Tie platePart Specifications

Material

0.080”-0.375” (2.0mm - 9.5mm)

551-604551-607551-806

3/16” (4.8 mm) 1/4” (6.4 mm) 1/4” (6.4 mm)

0.062”-0.270” (1.6mm - 6.9mm) SteelSteelSteelSteel

Steel

0.214”-0.437” (5.4mm - 11.1mm) 3/16” (4.8 mm)

551-810 0.350”-0.625” (8.9mm - 15.9mm)

0.080”-0.375” (2.0mm - 9.5mm)

552-604552-607552-806

3/16” (4.8 mm)1/4” (6.4 mm) 1/4” (6.4 mm)

0.062”-0.270” (1.6mm - 6.9mm)0.214”-0.437” (5.4mm - 11.1mm)

3/16” (4.8 mm)

552-810 0.350”-0.625” (8.9mm - 15.9mm)

0.080”-0.375” (2.0mm - 9.5mm)

553-604553-607553-806

3/16” (4.8 mm)1/4” (6.4 mm) 1/4” (6.4 mm)

0.062”-0.270” (1.6mm - 6.9mm)0.214”-0.437” (5.4mm - 11.1mm)

3/16” (4.8 mm)

553-810 0.350”-0.625” (8.9mm - 15.9mm)

Part Thread Grip Range

0.165”-0.260” (4.2mm - 6.6mm) 555-101555-106555-111

1/4-20 UNC1/4-20 UNC

0.027”-0.165” (0.7mm - 4.2mm)

0.027”-0.150” (0.7mm - 3.8mm) 5/16-18 UNC555-116555-121

5/16-18 UNC3/8-16 UNC

0.150”-0.312” (3.8mm - 7.9mm) 0.027”-0.150” (0.7mm - 3.8mm)

AluminumAluminumAluminumAluminum

S/SS/SS/SS/S

SteelSteelSteelSteel

551-604

555-101

906-000

MaterialPart Diameter Grip Range



C

M

J

CM

MJ

CJ

CMJ

N

p39EN.pdf 1 2013-10-08 08:56:37

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Parts Index

40

Part Page Part Page Part Page Part Page Part Page Part Page

202-255202-257202-261202-265202-301202-601203-001203-201203-251203-261203-271203-283203-701203-706203-801203-806203-821204-108204-112204-116204-308204-312204-316204-404204-412204-418204-508204-728204-801204-806204-821204-826204-841204-846204-901210-105210-111210-201210-203210-205210-207210-301210-303210-501212-101212-201212-303213-101213-103213-105213-201

171717171718141414141414141420202018181818181818181817181717171717171814141414141414141414141414141414

213-205213-301213-303215-101215-104215-109215-112215-117215-120215-125215-128215-133215-136215-141215-217215-220215-225215-228215-233215-236215-241216-101216-104216-109216-112216-117216-120216-125216-128216-133216-136216-141216-217216-220216-225216-228216-233216-236216-241218-109218-117218-120218-125218-133218-136218-141218-217218-220220-501220-503220-507

141414151515151515151515151515151515151515151515151515151515151515151515151515151515151515151515131313

220-509220-801220-806220-821220-901220-905220-911221-101221-106221-186221-196221-201221-203221-211221-301221-311221-521221-708221-851221-901221-911222-051222-111222-115222-121222-123222-125222-201222-203222-205222-207222-209222-211222-213222-215222-217222-219222-221222-223222-225222-227222-451222-581222-583222-585222-589222-621222-641222-801222-802222-803

1312121213131311111111111111111112111112121099999

1010101010101010101010101010109

1010977

101010

222-804222-805222-806222-807222-808222-809222-810222-930222-931222-932222-935222-936222-937222-940222-941222-942222-945222-946222-947222-951222-952222-953222-954222-955222-956222-957222-985222-987223-001223-101223-103223-105223-111223-121223-201223-203223-205223-207223-221223-351224-401224-406224-411224-416224-457224-481224-491224-601224-606224-801224-921

10101010101010

9999999999999999999

1010

813131313131313131313

888885888866

224-926225-101225-102225-103225-191225-201225-202225-203225-291225-301225-401225-491225-501225-502225-503225-521225-522225-523225-591225-596225-701225-791225-819225-851225-853225-855225-951225-951225-955225-961225-965226-001226-002226-003226-101226-102226-103226-191226-195226-199226-406226-451226-452226-453226-751226-771227-216227-221227-226227-236227-241

622222222533333333335555552332244444444444446644444

118-124118-136118-148118-160118-236118-248118-260118-436118-448118-460118-536118-548118-560124-124124-136124-148124-160124-172124-236124-248124-260124-272128-012128-018128-024130-136130-148130-160130-172130-236130-248130-260130-272136-124136-136136-148136-160136-172136-236136-248136-260136-272202-120202-201202-211202-216202-221202-231202-241202-251202-253

111111111111111111111111111111111111111111

178

17181717171717

C

M

J

CM

MJ

CJ

CMJ

N

p40EN.pdf 1 2015-11-20 08:46:51


Parts Index

235-702235-703235-704235-705237-101237-111237-121237-131240-101240-103240-106240-111240-121240-151240-201240-221240-306240-351240-353240-361241-101241-401242-101242-106242-111242-116242-131242-136242-141242-151242-181242-191243-101243-106243-111243-116243-121243-126243-131243-136243-141243-146243-161243-166243-171243-176243-191243-196251-111251-121251-131

33332222

191919191919202019

666

19191919191919191919191920202020202020202020202020202020222222

251-141251-145251-148251-151251-161251-171251-181251-201251-206251-211251-216251-221251-226251-231251-236251-241251-243251-311251-321251-351251-401251-501254-151254-501254-506260-101260-151261-108261-110261-112261-116261-118281-022281-050281-100283-013283-035283-065283-100285-013285-030285-060285-090285-120287-035287-045287-060287-080287-097287-135289-030

222222222222222222222222222222222222222222222222222424242424242423232323232323232323232323232323232323

289-060289-090289-120291-050291-075291-100291-150291-200291-250293-020293-030293-060293-100295-087295-120297-050297-075297-100297-150297-200297-250298-056298-079298-090298-203299-001299-011299-013299-015299-017299-036299-041299-101299-111299-118299-121299-131299-141299-146299-151299-166323-110323-112323-114323-116323-118323-120323-122323-124323-126323-128

232323232323232323232323232323232323232323232323232424242424242424242424242424242421212121212121212121

323-210323-212323-214323-216323-218323-220323-222323-224323-310323-312323-314323-316323-318323-320323-322323-324323-326323-328323-330323-332323-334323-336323-508323-510323-512323-514323-516323-518323-520323-522323-524323-526323-528323-530323-532323-534323-536323-538323-540323-542323-548323-560323-612323-614323-616323-618323-620323-622323-624323-626323-628

212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121

323-636323-648400-101400-109410-021410-091410-101410-106410-111410-121410-131410-201410-203410-205410-207410-211410-306410-321413-171413-173413-175413-177413-179413-181413-183413-185413-187413-191413-193413-201413-203413-205413-209413-211413-213413-215413-217413-219413-221413-223413-225413-227413-229413-260413-261413-262413-263413-264413-265413-266413-267

212127271919191919191919191919192020262626262626262626252525252525252525252525252525252525252525252525

227-246227-951227-957228-201228-206228-421228-423228-425228-431228-441228-451228-461228-481228-483228-491229-106229-121230-101230-201230-201230-221230-301230-311230-321230-501230-511230-511230-521230-531230-531235-101235-102235-103235-104235-105235-201235-202235-203235-204235-205235-301235-302235-303235-304235-305235-306235-307235-308235-309235-310235-701

444887777777777

1212

6666666666

1323222224444455555555553


C

M

J

CM

MJ

CJ

CMJ

N

p41EN.pdf 1 2015-11-20 08:47:24

T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625

Parts Index

42

Part Page Part Page Part Page Part Page Pièce Page Part Page

414-529414-531414-533414-535414-537414-539414-541414-543414-545414-547414-549418-101418-102418-103418-104418-105418-111418-112418-113418-114418-121418-122418-123418-124418-125418-126418-131418-132418-134418-135418-136418-137418-138418-139465-100465-109465-115465-121465-131465-141501-602501-603501-604501-606501-608501-610501-612501-614501-616501-618501-802

262626262626262626262627272727272727272727272727272727272727272727272020202020203535353535353535353535

501-804501-806501-808501-810501-812501-814501-816505-603505-604505-606505-608505-610505-612505-614505-616505-618506-602506-603506-604506-606506-608506-610506-612506-802506-804506-806506-808506-810511-602511-603511-604511-606511-608511-610511-612511-614511-616511-618511-802511-804511-806511-808511-810511-812511-814511-816515-603515-604515-606515-608515-610

353535353535353535353535353535353535353535353535353535353636363636363636363636363636363636363636363636

515-612515-614515-616515-618521-602521-603521-604521-606521-608521-610521-612521-614521-802521-804521-806521-808521-810531-602531-603531-604531-606531-608531-610531-612531-614531-802531-804531-806531-808531-810541-602541-603541-604541-606541-608541-610541-612541-614541-616541-618541-802541-804541-806541-808541-810541-812541-814541-816545-603545-604545-606

363636363737373737373737373737373737373737373737373737373737383838383838383838383838383838383838383838

545-608545-610545-612545-614545-616545-618551-604551-607551-806551-810552-604552-607552-806552-810553-604553-607553-806553-810555-101555-106555-111555-116555-121575-216575-251575-252575-253575-501575-502575-503575-651575-652575-653575-731575-732575-733575-735575-751575-752575-753575-754575-758580-122590-101590-106590-201590-206590-211590-216590-251590-256

383838383838393939393939393939393939393939393928282828282828282828282828282828282828282828282828282828

590-261590-266590-361607-101607-111607-341607-351610-007610-014610-046610-053610-092610-102610-111610-127611-151612-131612-141612-161612-501612-521612-541612-551625-008625-012625-022625-096625-106626-001626-003626-124626-130626-136652-101652-201652-601652-806652-811653-101653-111653-121653-141675-111675-126675-206675-211675-221675-226675-236675-241675-306

282828313131313131313131313131313131313131313131313131313232323232292929292929292929303030303030303030

413-270413-271413-272413-273413-274413-275413-276413-277413-280413-281413-282413-283413-284413-285413-286413-287413-291413-293413-295413-299413-400413-401413-403413-405413-409413-421413-423413-425413-427413-429413-433413-435413-437413-439413-441413-443413-445414-501414-503414-505414-507414-509414-511414-513414-515414-517414-519414-521414-523414-525414-527

252525252525252525252525252525252525252526262626262626262626262626262626262626262626262626262626262626

C

M

J

CM

MJ

CJ

CMJ

N

p42EN.pdf 1 2015-11-20 09:13:57


Parts Index

680-501680-506680-511680-516680-521707-101707-121707-151707-201750-001750-006750-021750-041750-101750-141752-101752-201752-211801-001801-003801-021801-023801-731801-901801-906801-951801-952801-953

32323232323333333334343434343434343433333333333434343434

801-954801-955801-956801-957805-462805-504805-529901-151901-161901-201905-101905-103905-106905-121905-123905-126905-151905-210905-215905-220905-225905-230905-310905-315905-320905-325905-330906-000

34343434343434333333333333333333333333333333333333333339

906-010906-012906-014906-016906-018906-020906-022906-185906-205906-225906-245906-265906-285906-305906-325906-345906-365906-385906-405906-425906-445906-465915-101915-104915-109915-112915-117915-120

39393939393939393939393939393939393939393939161616161616

915-125915-128915-133915-136915-141915-144915-217915-220915-225915-228915-233915-236915-241915-244916-101916-104916-109916-112916-117916-120916-125916-128916-133916-136916-141916-217916-220916-225

16161616161616161616161616161616161616161616161616161616

916-228916-233916-236916-241917-109917-117917-120917-125917-133917-136917-141917-217917-220917-225917-233917-236917-241918-117918-120918-125918-133918-136918-141940-101940-102940-104940-106940-112

16161616161616161616161616161616161616161616163232323232

675-311675-321675-326675-336675-406675-411675-421675-426675-436675-441675-451675-521675-526675-536675-611675-621675-626675-641675-711675-726675-736675-821675-911675-921675-926675-936680-301680-331

30303030303030303030303030303030303030303030303030303232


NOTES

C

M

J

CM

MJ

CJ

CMJ

N

p43EN.pdf 1 2015-11-20 09:14:33

Find the Jimexs family logosfor exceptionnal quality products

www.jimexs.com www.j-boxs.com www.j-lite.com www.jlite-o�road.com

To find out about our new products, don’t hesitateto visit our websitewww.jimexs.com

C

M

J

CM

MJ

CJ

CMJ

N

p44EN_cover.pdf 1 2015-11-20 15:33:56

C

M

J

CM

MJ

CJ

CMJ

N

coverBen.pdf 1 2015-11-20 10:37:08

coverfen.pdf 1 2013-04-05 16:02:54 - jimexs · rod guide, zinc rod guide, zinc deadbolt locks part...

Documents