1 © 2006 cisco systems, inc. all rights reserved.cisco confidentialpresentation_id scientific...
TRANSCRIPT
1© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialPresentation_ID
Scientific Atlanta Configuration
Module 2.3
2© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Agenda
Prerequisites and assumptions
Necessary components
Scientific Atlanta D9032 or 9022 encoder configuration
Testing broadcast using VLC and on Digital Media Player Device Manager (DMPDM)
Digital Media Manager (DMM) configuration
Publishing broadcast to Digital Media Player (DMP)
3© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Prerequisites and Assumptions
Familiar with basic DMP setup and “Quick Start Guide for Cisco Digital Media Player 4305G” that ships with DMP
Familiar with Digital Media Player Device Manager (DMPDM)
Pre-configured Digital Media Manager – Digital Signage Module (DMM-DSM)
DMP added to DMM-DSM by either DMP Discovery application or configured manually
4© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Necessary Components
Composite video source (Video camera, DVD player, cable/satellite box, etc.)
Scientific-Atlanta D9032 or 9022 Encoder
Digital Media Manager – Digital Signage Module (DMM-DSM) Appliance or VMWare
Digital Media Player (DMP)
Optional: Webserver
D9032 and DMP Interaction
1
3
62
4
5
8
1. Video Source feed into D90322. D9032 joins and streams to multicast
group in multicast network3. DMM Publishes Multicast Application
or URL of a HTML page with multicast video configured in a zone from optional webserver to DMP (Interactions 4&5 will be skipped if not using webserver)
4. Optional: DMP requests HTML page with multicast configured from webserver
5. Optional: Webserver serves HTML page to DMP
6. DMP sends IGMP join request to multicast group
7. Multicast network joins DMP and streams multicast video to DMP
8. DMP displays multicast video within a zone using HTML page or full screen video without using HTML page.
Multicast Enabled Network
7
6© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Scientific-Atlanta D9032 Encoder For live broadcasting of high quality MPEG-2 video to the Digital Media
Player, using limited bandwidth
1 RU, single channel, low power-consumption, stackable
Composite input (for cable feed) and SDI input
Supports constant or variable bit rate (CBR or VBR)
Front panel LCD and web interface for encoder control
Supports SNMP
Order through Scientific-Atlanta (instructions on DMSBU web site)
7© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Live Broadcast Set Up Process
1. D9032 physical connections to video source and IP network
2. SA D9032 encoder multicast configuration
3. Verifying D9032 configuration using VLC
4. Testing broadcast/multicast using DMPDM
5. DMM--Multicast configuration
5.1. Creating a full screen design for a multicast stream
5.2. Adding a multicast stream to the design
5.3. Saving the presentation
5.4. Deploying new design with multicast stream
8© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 1: D9032 Physical Connections to Video Source and IP Network
1. Connect composite video (yellow) on the video source (video camera, DVD/VCR or cable box) to composite video input on D9032
2. Connect one end of RCA audio cables to video source’s audio output connectors (white & red)
3. Cutoff RCA connector on other end of RCA audio cable and strip the wires
4. Plug the green audio connector that comes separate along with D9032 to the “Analog Audio In 1 & 2” port on D9032
5. Connect stripped wires for left channel (white) to D9032 audio green connector to holes 1 and 2
6. Connect stripped wires for right channel (red) to D9032 audio green connector to holes 3 and 4
7. Connect D9032’s MANAGEMENT and IP TS OUT ethernet ports to network
8. Configure D9032’s Management IP Address and gateway though front panel (follow page 1-3 of D9032 Encoder User and Service Manual)
9. Access D9032 Web management interface using IP Address configured for Management (http://<ip address>) (follow page 1-4 of D9032 Encoder User and Service Manual)
D9032 Analog Audio Port
Note : if you have an orange digital feed off of your source you can use in in the BNC digital input on the 9022/9032.
9© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 2: SA D9032 Encoder Configuration Click Video->Encoder Rate
Configure Video Encoder Rate in Fixed Video Rate box with desired bit rate (example below shows 4.5Mbps)
10© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 2: SA D9032 Encoder Configuration Click VBI->VBI
Configure Video Source by selecting “Composite” radio button
11© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 2: SA D9032 Encoder Configuration Click TS Output->TS Output
Configure Transport Stream Output Bit Rate box with a value higher then Video Encoder Rate (example here shows 5Mpbs for Output Bit Rate and Video Encoder Rate was 4.5Mbps)
Leave Output Format default at 188
12© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 2: SA D9032 Encoder Configuration Configure IP Streaming Multicast address and port in IP and Port
Number boxes and leave other default settings
Please note: MAC address is optional when using multicast
13© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 3: Verifying D9032 Configuration Using VLC
Test multicast stream from D9032 to ensure correct configuration on D9032
Download, check system requirement for VLC and install VLC from here: http://www.videolan.org/vlc/
Start VLC
Click Open Network stream (Ctrl+N)
14© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 3: Verifying D9032 Configuration Using VLC Click UDP/RTP Multicast radio button
Configure multicast IP Address and Port number configured on D9032 (example in this document: multicast address 239.2.2.2 and port number 10000)
Click “OK” and video window should start playing video
15© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 3: Verifying D9032 Configuration Using VLC
Multicast video streaming from D9032 displaying on VLC
16© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 4: Testing Multicast Using DMPDM
Open Digital Media Player Device Manager (DMPDM)
Click Display Actions->Video Multicast
Configure Multicast Address and Multicast Port configured on D9032 (example in this document: multicast address 239.2.2.2 and port number 10000)
Click Start
Display should play full screen video from video source
*Please note: This configuration will not be saved in the DMP
17© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 4: Testing Broadcast Using DMPDM Screen shot of sample configuration on DMPDM
18© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 4: Testing Multicast Using DMPDM Multicast video streaming from D9032 displaying from DMP output on
display
19© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 5: DMM Multicast Configuration
Since the introduction of version 4.1, in order to show a full screen video—multicast or unicast—a design must be created
The Digital Media Designer tool allows you to easily create more advanced layouts to use on the screens beyond a full screen video
20© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 5.1: Creating a DesignInside the Digital Signage Module, go to the Digital Signage->Presentations, and open the Digital Media Designer tool by clicking “Create Presentation.”
21© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
Step 5.1: Creating a DesignFrom the Objects/Actions panel, drag and drop a Video Playlist on to the screen. Then right Click and choose “Whole Screen”. Move your pointer down toward the bottom right side of the screen and click on the green Plus Sign.
22© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
5.2 Adding a Multicast AddressUnder the Content Chooser Dialog, choose URL. Name your multicast stream and fill the URL field with the multicast address in the URL as follows: udp://MULTICAST-IP:PORT, i.e udp://239.2.2.2:10000. Add the stream by clicking on the down arrow. And click on submit to finish.
23© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
5.2 Adding a Multicast AddressOnce submitting the Content Chooser Dialog screen, the new stream will appear in the Playlist items and in the Video Playlist of the Workspace.
24© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
5.3 Saving the PresentationFrom the menu bar click on File --> Save. Provide a Name and select on the “Presentation” radio button, and click OK.
25© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
5.4 Deploying the New Multicast DesignGo back to DMM and click Schedules->Play Now. Open the “Select an Event Type” drop down menu, choose the Presentation and click “Select Presentation” button. In the pop-up window, select the multicast presentation and click “OK.”
26© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
5.4 Deploying the New Multicast DesignOnce the presenation is selected, select the DMP in the main window by clicking on the DMP. Then, click “Submit.”
27© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007
5.4 Deploying the New Multicast Design The Multicast video streaming from D9032/9022 should be
displaying from DMP output on the display
28© 2006 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialTMEConf28062007