09.netnumen u31 _v12_11_20p01_operationguaid(wdm_otn_e2e)_en

65
NetNumen™ U31 R22 Unified Network Management System Operation Guide (WDM/OTN End-to-End Management) Product Version: V12.11.20P01 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://ensupport.zte.com.cn E-mail: [email protected]

Upload: nuwan0739

Post on 23-Oct-2015

238 views

Category:

Documents


65 download

DESCRIPTION

tellecamunication

TRANSCRIPT

Page 1: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22Unified Network Management System

Operation Guide (WDM/OTNEnd-to-End Management)

Product Version: V12.11.20P01

ZTE CORPORATIONNO. 55, Hi-tech Road South, ShenZhen, P.R.ChinaPostcode: 518057Tel: +86-755-26771900Fax: +86-755-26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]

Page 2: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

LEGAL INFORMATIONCopyright © 2011 ZTE CORPORATION.

The contents of this document are protected by copyright laws and international treaties. Any reproduction or

distribution of this document or any portion of this document, in any form by any means, without the prior written

consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by

contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE

CORPORATION or of their respective owners.

This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions

are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,

title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the

use of or reliance on the information contained herein.

ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications

covering the subject matter of this document. Except as expressly provided in any written license between ZTE

CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter

herein.

ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.

Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.

The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

Revision No. Revision Date Revision Reason

R1.0 2011-09-30 NetNumen™ U31 R22 (V12.11.20P01) Issued

Serial Number: SJ-20110915113509-009

Publishing Date: 2011-09-30 (R1.0)

Page 3: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

PrefaceManual DescriptionThis manual is applicable to NetNumen™ U31 R22(V12.11.20P01) Unified NetworkManagement System (hereinafter referred to U31 R22).

U31 R22 is an network-level network management system based on the distributed,multi-process and modular design. It can exercise unified management over the CTN,SDH, WDM/OTN, Router, BAS and Switch series of optical transmission equipment fromZTE.

What is in This ManualThis manual is NetNumen U31 R22 (V12.11.20P01) Unified Network Management SystemOperation Guide (WDM/OTNEnd-to-EndManagement). It contains the following contents:

Chapter Content

Chapter 1, Overview Introduces the basic knowledge about end to end service

management on U31 R22.

Chapter 2, Navigation Mode Describes how to browse the service topology in the U31 R22

service view.

Chapter 3, Customer Management Describes how to manage customers, relate customers

with services, and how to browse alarms and information of

customers on U31 R22.

Chapter 4, Service Leasing Describes how to relate customers with the services leased to

them and how to modify or delete the relations between the

customers and the services on U31 R22.

Chapter 5, Service Rank Template Describes how to create, modify and delete the service rank

template on U31 R22.

Chapter 6, Querying Services Describes how to query the configured services and relative

information of the services.

Chapter 7, Operating Services in

Batches

Describes how to discover services automatically and

import/export services in batches on U31 R22.

Chapter 8, Managing WDM

Equipment Services in End-to-End

Mode

Describes how to configure typical WDM/OTN services on U31

R22.

Chapter 9, Maintaining Services Describes how to maintain service states and delete services

on U31 R22.

Intended ReadersThis manual applies to the following engineers:

I

Page 4: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

l Planning Engineersl U31 R22 Monitoring Personnell Maintenance engineers

Conventions

1. Safety signs

The following safety signs may appear in this manual.

Safety Sign Meaning

DangerA serious accident, such as casualties or equipment damage may

occur if you ignore this safety warning.

WarningA major accident, such as casualties or equipment damage may

occur if you ignore this safety warning.

Caution

Equipment damage, data loss, degradation of equipment perfor-

mance, or other unpredictable result may occur if you ignore this

safety warning.

NoteProvides additional information about a topic.

TipIndicates a suggestion or hint to make things easier or more pro-

ductive.

2. Manual Usage Convention

This manual takes the U31 R22 client running on the Windows platform as an examplefor illustration.

II

Page 5: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Table of ContentsPreface............................................................................................................. I

Chapter 1 Overview.................................................................................... 1-11.1 End-to-End Management .................................................................................... 1-1

1.2 Features of End-to-End Management .................................................................. 1-2

1.3 About the Service View....................................................................................... 1-2

Chapter 2 Navigation Mode ....................................................................... 2-12.1 Setting the Service Navigation Mode ................................................................... 2-1

2.2 Customizing the Service Topology Display ........................................................... 2-2

Chapter 3 Customer Management ............................................................ 3-13.1 Creating a Customer .......................................................................................... 3-1

3.2 Viewing the Customer Information ...................................................................... 3-2

3.3 Modifying the Customer Information .................................................................... 3-2

3.4 Deleting the Customer Information ...................................................................... 3-3

Chapter 4 Service Leasing......................................................................... 4-14.1 Adding the Service Rent Relation ....................................................................... 4-1

4.2 Modifying the Service Rent Relation .................................................................... 4-3

4.3 Deleting the Service Rent Relation ..................................................................... 4-4

Chapter 5 Service Rank Template............................................................. 5-15.1 Overview ........................................................................................................... 5-1

5.2 Creating a Service Rank Template ...................................................................... 5-1

5.3 Modifying a Service Rank Template ..................................................................... 5-3

5.4 Deleting a Service Rank Template ....................................................................... 5-3

Chapter 6 Querying Services .................................................................... 6-16.1 Filtering and Quering Services ........................................................................... 6-1

6.1.1 Filtering Services...................................................................................... 6-1

6.1.2 Querying Services Carried by an Optical Connection.................................. 6-3

6.2 Querying Service Information .............................................................................. 6-3

6.2.1 Querying Services Under a Service Bundle................................................ 6-3

6.2.2 Querying Client-Layer Services Carried over Server Layer ......................... 6-4

6.2.3 Querying Subnet Links of a Service........................................................... 6-5

6.2.4 Querying the Resource Usage .................................................................. 6-6

6.3 Exporting Service Statistic Reports...................................................................... 6-7

I

Page 6: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 7 Operating Services in Batch ................................................... 7-17.1 Discovering the Service Automatically ................................................................. 7-1

7.2 Importing Services in Batches ............................................................................ 7-2

7.3 Exporting Services in Batches ............................................................................ 7-3

Chapter 8 Managing WDM Equipment Services in End-to-EndMode........................................................................................................ 8-18.1 Configuring WDM Services ................................................................................. 8-1

8.1.1 Creating WDM Optical Channels ............................................................... 8-1

8.1.2 Creating the ODUk Service ....................................................................... 8-4

8.1.3 Creating an OAC Service.......................................................................... 8-6

8.2 Modifying WDM Services .................................................................................... 8-9

8.2.1 Adjusting a WDM Service End .................................................................. 8-9

8.2.2 Adjusting a WDM Service Route................................................................ 8-9

8.2.3 Deleting the SNCP Protection ................................................................. 8-10

8.2.4 Adding the SNCP Protection ....................................................................8-11

8.3 Creating an Ethernet Service .............................................................................8-11

Chapter 9 Maintaining Services ................................................................ 9-19.1 Querying Current Alarms ................................................................................... 9-1

9.2 Querying Current Performances.......................................................................... 9-1

9.3 Maintaining Service States.................................................................................. 9-2

9.3.1 Overview ................................................................................................. 9-2

9.3.2 Activating Services ................................................................................... 9-3

9.3.3 Deactivating Services ............................................................................... 9-3

9.3.4 Devoting Services .................................................................................... 9-4

9.3.5 Undevoting Services ................................................................................ 9-5

9.4 Modifying Services ............................................................................................. 9-5

9.4.1 Modifying QoS Parameters of a Service .................................................... 9-5

9.4.2 Modifying Service Basic Properties in Batches ........................................... 9-6

9.5 Deleting Services ............................................................................................... 9-7

9.5.1 Detaching Services .................................................................................. 9-7

9.5.2 Deleting Services ..................................................................................... 9-8

Figures............................................................................................................. I

Glossary ........................................................................................................ III

II

Page 7: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 1OverviewTable of Contents

End-to-End Management ...........................................................................................1-1Features of End-to-End Management.........................................................................1-2About the Service View ..............................................................................................1-2

1.1 End-to-End ManagementAbstract

According to the characteristics of the transport network, U31 R22 allows users to create,configure and manage end-to-end services in the service view. Compared with theservice configuration mode by single NE, the end-to-end mode is more effective andstraightforward.

Note:

The end-to-end management function needs the support of license.

Working Principles

When creating services with the end-to-end mode, you only need to specify the source,sink and restriction conditions, and then U31 R22 will calculate routes automatically andcreate corresponding cross connections on the NE. The end-to-end configuration mode isalso called path mode.

The procedure of creating a service with the end-to-end mode is described as follows:

1. The user selects the level, source and sink for the service to be created on the U31R22 client interface, and sets restriction conditions of the route.

2. U31 R22 automatically calculates the route of the service, and displays the calculationresult on the interface.

3. The user confirms to create the service after checking the correctness of service routeand other parameters.

4. U31 R22 calculates the corresponding cross connections based on the serviceinformation and issues them to the NE.

5. An end-to-end service and the corresponding cross connections on the NEs arecreated.

1-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 8: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

1.2 Features of End-to-End ManagementWith the end-to-end service management function, you can:l Create and configure services in end-to-end mode.l Display services in graphics, which is easier for operation and maintenance.l Filter, search, and locate services quickly, and centralize the management of a large

amount of services.l Query the detailed information of services.l Manage alarms and performances of services.l Collect service statistics and output reports.

1.3 About the Service ViewAbstract

The service view provides a platform for service browse and operation in a network-wideview. It can display the distribution of various services in the network.

Service Management View

The service management view is divided into three areas: navigation area, topology areaand table area, as described below.

l Navigation area

In this area, you can quickly locate and browse services through two navigationmodes: navigate by domain and navigate by single NE. Filter conditions can also beset in each navigation mode. You can select navigation mode of view first and thenfilter to confirm the navigation scope and locate the result.

l Topology area

After the navigation scope is determined in the navigation area, the topology areadisplays how services are distributed in graphics mode.

l Table area

It is used to display the detailed service information in table mode. When a servicebundle is selected on the topology, the table displays the connected servicescontained in the selected service bundle. When an NE is selected on the topology,the table displays the unconnected services involved with the selected node.

Service

The service bundles are responsible of transmitting the information from the source endof the path to the destination end and monitoring the integrality of the information.

1-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 9: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 1 Overview

Service Explorer

In the main menu, choose Service > Service Explorer. The service explorer windowappears, as shown in Figure 1-1. You can query service route, attributes and subnetconnections through the service explorer.

The left area is the filtering condition area. The right area is divided into three areas:service list area, service attributes, route and subnet connection display area. The buttonarea is located at the bottom.

Figure 1-1 Service Explorer

1-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 10: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

This page intentionally left blank.

1-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 11: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 2Navigation ModeTable of Contents

Setting the Service Navigation Mode..........................................................................2-1Customizing the Service Topology Display .................................................................2-2

2.1 Setting the Service Navigation ModeAbstractYou can navigate by service or by WDM TOPO to locate the service topology information.

Steps1. (Optional) Set the navigation mode to Service View.

a. Select Service View from the drop-down list in the upper left corner of the serviceview.

b. Select the corresponding navigation mode in accordance with the actual situation.Click Navigate by Template.

If Description

Select the Navigate by NE mode Select the NE to be queried for services, and you can

query the services related to the NE.

Select the Navigate by Template mode i. Set the filter conditions as needed. Expand Basic At-

tributes, Connection Service, and Ethernet Service to

set the detailed filter conditions.

ii. Click Filter in All or Filter in Result

2. Optional: Set the navigation mode to WDM Navigate by Topo.

2-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 12: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

a. SelectWDM Navigate by Topo from the drop-down list in the upper left corner ofthe service view.

b. Click Filter to enter the filer tab.

c. Select Init by NE and then click the Resource button.

d. Click Filter in All.

– End of Steps –

Result

The query results can be obtained as per the set filter conditions.

2.2 Customizing the Service Topology DisplayAbstract

In the service view, you can customize the display effect of the service topology, whichincludes bubbles and service bundle colors.

Prerequisites

l You have the user rights of "Operator Role" or above.l You have entered the service view.

Steps

1. In the topology map of the service view, right-click and choose Customized ServiceTopo.

2. Select the Alarm bubble check box to display alarms in bubbles on the topology.

Note:

The number in the alarm bubble on a service bundle is the total number of currentalarms of the services included in the service bundle. The bubble color is the color ofthe highest-severity alarm that is unacknowledged.

3. Click Add to set the meanings of service bundle colors, as described below.

Meaning Description

Alarm State It is the default display setting of the service bundle color. By

default, the service bundle color is consistent with the color of the

highest-severity alarm that is unacknowledged.

2-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 13: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 2 Navigation Mode

Meaning Description

Consistent State Set the corresponding colors of four consistent states: consistent,

inconsistent, exception, and extended. The service bundle color is

consistent with the service with the worst consistent state in the service

bundle.

Note:

The service bundle color can only be consistent with eitherAlarm State orConsistentState.

4. Click OK.

– End of Steps –

Result

The configured customized display modes appear in the list ofCustomized Service Topo.

2-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 14: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

This page intentionally left blank.

2-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 15: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 3Customer ManagementTable of Contents

Creating a Customer ..................................................................................................3-1Viewing the Customer Information .............................................................................3-2Modifying the Customer Information ...........................................................................3-2Deleting the Customer Information .............................................................................3-3

3.1 Creating a CustomerAbstract

You can create a customer and add information to maintain the customer's paths andservices.

Prerequisites

You have the user rights of "Operator Role" or above.

Steps

1. Choose Service > Customer Management from the main menu. The CustomerManagement dialog box appears.

2. Click Add in the Customer Info area. The New Customer dialog box appears.

3. Fill in the customer information in the Property Value column.

Note:

The customer level is classified into high level, middle level, and low level, whichcorrespond to different line qualities.

4. Click OK.

– End of Steps –

Result

The created customer information is displayed in the Customer Info list.

3-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 16: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

3.2 Viewing the Customer InformationAbstract

You can view the related properties of the customer who uses the transmission services.

PrerequisitesYou have the user rights of "Supervisor Role" or above.

Steps1. Choose Service > Customer Management from the main menu. The Customer

Management dialog box appears.

2. According to the property information of the customer to be checked, configure filterconditions in Filter Choice in the left area, and then click Filters.

Note:

You can click Reset to clear all the configurations in Filter Choice.

The filter result is displayed in Customer Info.

3. Double-click the customer information, the Customer Info View dialog box appears.It displays the detailed customer information.

– End of Steps –

3.3 Modifying the Customer InformationAbstract

During network operation and maintenance, you need to modify the customer informationif it changes.

PrerequisitesYou have the user rights of "Operator Role" or above.

Steps1. Choose Service > Customer Management from the main menu. The Customer

Management dialog box appears.

2. According to the property information of the customer to be modified, configure filterconditions in Filter Choice in the left pane in the Customer Management interface,and then click Filters.

3-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 17: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 3 Customer Management

Note:

You can click Reset to clear all the configurations in Filter Choice.

The filter result is displayed in Customer Info.

3. Right-click the customer information, and then chooseModify from the shortcut menu.The Modify Customer dialog box appears.

4. Modify the customer information in the dialog box, and then click OK.

– End of Steps –

Result

The customer information in the Custom Info list is updated accordingly.

3.4 Deleting the Customer InformationAbstract

You can delete the customer information for the need of network operation andmaintenance.

Prerequisites

You have the user rights of "Operator Role" or above.

Steps

1. Choose Service > Customer Management from the main menu. The CustomerManagement dialog box appears.

2. According to the property information of the customer to be deleted, configure filterconditions in Filter Choice on the left, and then click Filters.

Note:

You can click Reset to clear all the configurations in Filter Choice.

The filter result is displayed in Custom Info.

3. Right-click the customer information to be deleted, and then choose Delete from theshortcut menu.

3-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 18: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

4. Click OK in the pop-up dialog box.

– End of Steps –

Result

The customer information disappears from the Customer Info list.

3-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 19: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 4Service LeasingTable of Contents

Adding the Service Rent Relation ..............................................................................4-1Modifying the Service Rent Relation...........................................................................4-3Deleting the Service Rent Relation ............................................................................4-4

4.1 Adding the Service Rent RelationAbstract

After you have created the customer information, you can add customer information to thecreated service by adding service rent relation. In this way, you can identify the relationbetween the customer and his rent service in U31 R22.

Prerequisites

l You have the user rights of "Operator Role" or above.l You have created the customer information.l You have created the service to be added into the rent relation.

Steps

1. In the main menu of the U31 R22 client, choose Service > Service Rent to displaythe Service Rent dialog box.

2. ClickAdd to display the Service Rent Info dialog box, as shown in the following figure.

4-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 20: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

3. Type the properties of the service rent information according to the following table.

Property Description

Customer Name Select the customer name of the service rent information to be added

Start Time Select the start time of the rent relation

End Time Select the end time of the rent relation

SLA Grade Type the Service Level Agreement (SLA) grade

Traffic Type It identifies the service type that the customer rents. You can select

one or multiple service types.

Service List Select the services that the customer rents. You can select one or

multiple services.

4. Click Add... to display the Select Service dialog box.

5. Click Add, and the selected service appears in the Select Result at the bottom of thedialog box.

6. Click OK, and the services selected in Step 5 appear in the Service List.

7. Click OK to return to the Service Rent dialog box.

– End of Steps –

4-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 21: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 4 Service Leasing

Result

The added service rent relation is displayed in the Service Rent List of the Service Rentdialog box.

4.2 Modifying the Service Rent RelationPrerequisites

l You have the user rights of "Operator Role" or above.l You have created the customer information.l The service rent relation to be modified is already in the rent list.

Steps

1. In the main menu of the U31 R22 client, choose Service > Service Rent to displaythe Service Rent dialog box.

2. Select the service rent item from the service rent list, and then click Modify to displaythe Service Rent Info dialog box.

3. In the Service Rent Info dialog box, refer to the table below to modify the propertiesof the service rent information.

Property Description

Start Time Select the start time of the rent relation.

End Time Select the end time of the rent relation.

SLA Grade Enter the Service Level Agreement (SLA) grade

Traffic Type It identifies the service type the customer rents. You can select one

or multiple service types.

Note:

The properties of the service rent information that can be modified include Start Time,End Time, SLA Grade and Traffic Type.

4. Click OK to return to the Service Rent dialog box.

– End of Steps –

Result

The information of the customer service rent relation is updated successfully.

4-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 22: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

4.3 Deleting the Service Rent RelationPrerequisites

l You have the user rights of "Operator Role" or above.l You have created the customer information.l The service rent relation to be deleted is already in the rent list.

Steps

1. In the main menu of the U31 R22 client, choose Service > Service Rent. The ServiceRent dialog box appears.

2. Select the service rent item from the service rent list, and then click Delete. TheConfirm dialog box appears.

3. Click Yes to confirm the operation.

– End of Steps –

Result

The service rent relation is deleted successfully, and the related service rent itemdisappears from the Service Rent List.

4-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 23: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 5Service Rank TemplateTable of Contents

Overview....................................................................................................................5-1Creating a Service Rank Template ............................................................................5-1Modifying a Service Rank Template............................................................................5-3Deleting a Service Rank Template..............................................................................5-3

5.1 OverviewService rank templates provide standard service ranks. When creating an SDH/WDM/OTNservice, you can specify its service rank quickly and easily by using service rank templates.

5.2 Creating a Service Rank TemplateShort Description

Service rank templates describe the information about self-healing protection of services.You can set the service rank of a service conveniently through a self-defined template.

Prerequisites

You have the user rights of "Operator Role" or above.

Steps

1. Choose Service > Service Profile Management > Service Rank from the mainmenu. The Service Rank Template Table dialog box appears.

5-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 24: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

2. Click Add, and set parameters in the pop-up Please input service rank parameterdialog box.

3. Click Apply.

– End of Steps –

Result

The created service rank template is displayed in the Service Rank Template Table.

5-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 25: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 5 Service Rank Template

5.3 Modifying a Service Rank TemplatePrerequisites

You have the user rights of "Operator Role" or above.

Steps

1. Choose Service > Service Profile Management > Service Rank from the mainmenu. The Service Rank Template Table dialog box appears.

2. Select a template to be modified, and then click Modify.

Note:

The default templates are not modifiable.

3. Modify the relative parameters of the template in the pop-up dialog box.

4. Click Apply.

– End of Steps –

Result

The modified template is displayed in the Service Rank Template Table.

5.4 Deleting a Service Rank TemplatePrerequisites

You have the user rights of "Operator Role" or above.

5-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 26: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Steps

1. Choose Service > Service Profile Management > Service Rank from the mainmenu. The Service Rank Template Table dialog box appears.

2. Select a template to be deleted, and then click Delete.

Note:

The default templates cannot be deleted.

3. Click Yes in the pop-up dialog box.

– End of Steps –

Result

The deleted template disappears from the Service Rank Template Table.

5-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 27: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 6Querying ServicesTable of Contents

Filtering and Quering Services ..................................................................................6-1Querying Service Information .....................................................................................6-3Exporting Service Statistic Reports.............................................................................6-7

6.1 Filtering and Quering Services

6.1.1 Filtering Services

Abstract

When browsing services in the navigation mode, you can set filter conditions to display theservices that meet the conditions only.

Steps

1. In the navigation area of theService View tab, click the Filter tab to set filter conditions.

Note:

You can set filter conditions by combining the properties under “Basic Attributes”,“Connection Service”, and “Ethernet Service”.

2. Select or type the filter conditions as needed.

6-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 28: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

3. Click Filter in All.The system will filter the services according to the configured filter conditions.

4. Click Filter in Result from the drop-down tab.The system will filter again from the previous filter result.

– End of Steps –

6-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 29: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 6 Querying Services

Result

The filtered service bundle will be displayed in the topology of the service view. Click theservice bundle, and the service information will be displayed in the table area at the bottomof the topology.

6.1.2 Querying Services Carried by an Optical Connection

Abstract

You can query all the services carried by optical connections in the topology managementview.

Prerequisites

l You have the user rights of "Operator Role" or above.l Services have been created on optical connections between NEs.l You have entered the topology management view.

Steps1. Select an optical connection to be queried.

2. Optional: if there are multiple connections between NEs, click to select aconnection.

3. Right-click an optical connection, and then select Service Explorer from the shortcutmenu.

– End of Steps –

Result

The Service Explorer view shows all services carried by the optical connections. If youselect a service in the service list, the corresponding information is displayed in the Route,Attribute, and Subnetwork Connection tabs at the bottom of the window.

6.2 Querying Service Information

6.2.1 Querying Services Under a Service Bundle

Abstract

You can query the detailed information of the services under a certain service bundlebetween two NEs.

Prerequisites

l You have the user rights of "Supervisor Role" or above.

6-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 30: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

l You have entered the service view.l Services between NEs have been created successfully.

Steps

1. Locate the service bundle through the Navigate by Template tab in the left area ofthe service view.

2. Click the service bundle to be queried.

– End of Steps –

Result

All the service information of the service bundle is displayed at the bottom table of theinterface.

6.2.2 Querying Client-Layer Services Carried over Server Layer

Abstract

You can query the client-layer service information carried over server-layer between NEs,including directly and indirectly carried service information.

Prerequisites

l You have the user rights of "Supervisor Role" or above.l You have entered the service view.l The service bundles have been located through Navigate by Template.

Context

The end-to-end services are transmitted layer by layer in the transmission network, thatis, each network layer provides carrying service for its upper network layer, and uses thecarrying service provided by its lower network layer. If two network layers are directlyadjacent, the carrying relation is called direct carrying; if two network layers are indirectlyadjacent, the carrying relation is so called indirect carrying. The layer providing carryingservice is server layer, and that using carrying service is client layer.

Steps

1. In the service view, select a service bundle to be queried.

2. In the service list, select a server-layer service record.

3. Right-click the service record, and then choose Query > Query Client Layer ServiceCarried over Server Layer. The Query Client Layer Service Carried over ServerLayer dialog box appears.

6-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 31: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 6 Querying Services

Note:

Recursive Query means that the querying results include directly or indirectly carriedclient-layer services.

4. Click Confirm.

– End of Steps –

Result

The Service Explorer dialog box appears, displaying the information of the carriedclient-layer services.

6.2.3 Querying Subnet Links of a Service

Abstract

You can query the information of NE cross connections used by a service, including userlabel, rate, state, direction, and end.

Prerequisites

l You have the user rights of "Supervisor Role" or above.l You have entered the service view.l The service bundles have been located through Navigate by Template.

6-5

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 32: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Context

The services supporting this operation include SDH service, VC-x tunnels bound withEthernet links, CES E1 services, CES ATM services, and WDM services.

Steps

1. Click a service bundle between two NEs, and then select a service record to be queriedfrom the service list.

2. Right-click the service record, and then choose Query > Query Subnet Link ofService to open the Subnet Link window.

– End of Steps –

Result

The information of NE cross connections used by a service is displayed in the window.

6.2.4 Querying the Resource Usage

Abstract

When the service is bearing the client layer as a server layer, you can query the occupationof its resource.

Prerequisites

l You have the user rights of "Supervisor Role" or above.l You have opened the service view.l The service bundles have been located through Navigate by Template.

Context

The rate of server layer, supporting resource usage querying, includes: regenerationsection rate, multiplexing section rate, VC4 server-layer rate, and MPLS-TP tunnel rate.

Steps

1. In the service view, select a service bundle to be queried from the topology.

2. In the service list under the service bundle, select a server-layer record (the ratecolumn in the list displays regeneration section rate, multiplexing section rate, VC4server-layer rate, or MPLS-TP tunnel rate).

3. Right-click and choose Query > Query Resource Usage. The Resource Usagedialog box appears.

– End of Steps –

6-6

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 33: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 6 Querying Services

Result

All the resource usage can be queried in the interface.

6.3 Exporting Service Statistic ReportsAbstract

You can export the service statistics through reports.

Prerequisites

You have the user rights of "Supervisor Role" or above.

Steps

1. In the main menu, choose Statistics > E2E Report Management. The E2E ReportManagement window appears.

2. Select Service Statistic Report, and then click the Filter tab. Select the filterconditions, and then click Filter in All.The Customer Name, State, Layer Rate, and Total Number of the service aredisplayed.

3. Click Export, and then select Print or File.

4. In the pop-up dialog box, clickOK. Follow the steps below to print or export the servicestatistic report.l Print: In the pop-up Print Setup dialog box, set General, Page setup and

Advanced, and then click Print.l File: In the pop-up Save dialog box, select Save in, File name and Files of type,

and then click Save.

– End of Steps –

Result

The service statistic report is exported to the specified path or printed to a file.

6-7

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 34: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

This page intentionally left blank.

6-8

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 35: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 7Operating Services in BatchTable of Contents

Discovering the Service Automatically ........................................................................7-1Importing Services in Batches ...................................................................................7-2Exporting Services in Batches ...................................................................................7-3

7.1 Discovering the Service AutomaticallyAbstract

By discovering service automatically, you can set up the cross connections and fiberconnections configured on the NEs into the services that can be managed in the serviceview. The cross connections can either be configured on U31 R22 in single site mode, oralready exist on the NE.

Prerequisites

You have the user rights of "Operator Role" or above.

Context

This function applies to all NEs that can be managed by U31 R22.

Steps

1. Choose Service > Discover Service Automatically from the main menu. TheDiscover Service Automatically dialog box appears.

2. Click Policy Setting.... The Policy Setting of Discovery dialog box opens.

7-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 36: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Note:l Discover Increment: For the configuration information about cross connections

and fiber connections in the service view, only collect the modified or newly addedpart of these information for management.

l Discover Whole: collect the configuration information about cross connectionsand fiber connections of all the NEs in the service view, and manage all theseinformation. Discover whole will lose the following service properties: custom 1,custom 2, custom 3, and comment.

3. Select a Service Build Policy, and then click OK.

4. Click Start.

– End of Steps –

Result

After the discovery is completed, the Current Content and Total Number are displayed.

7.2 Importing Services in BatchesShort Description

You can import related service properties into the system to update and maintain them byimporting xls files.

Prerequisites

l You have the user rights of "Operator Role" or above.

7-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 37: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 7 Operating Services in Batch

l There are xls files to be imported. (Before importing the xls files, you can export themfrom U31 R22 and modify related parameters first.)

ContextThe service fields that can be imported and updated in xls files include: user label, policydescription, and user-defined property.

Steps1. Choose Service > Whole Net Service Import And Export from the main menu. The

Whole Net Service Import And Export dialog box appears.

2. Select Import, and then click Select to configure the file to be imported.

3. Select Import Fields, and then click Start.

– End of Steps –

ResultAfter the progress is completed, a dialog box pops up, indicating that the service has beenimported successfully. The service properties are updated to be those in the xls file.

7.3 Exporting Services in BatchesAbstractYou can export the information of service labels and endpoints to xls files for modificationor viewing. The service information in the exported files, such as user label, user postil,user-defined property, and source point of the service can be modified.

PrerequisitesYou have the user rights of "Operator Role" or above.

Steps1. Choose Service > Whole Net Service Import And Export from the main menu. The

Whole Net Service Import And Export dialog box appears.

2. Click the Export tab, and then configure the export parameters according to thefollowing table.

Parameter Explanation

Filter Conditions According to basic property configuration, only

the services matching with the conditions are

exported.

Customized Fields The fields moved to the right side in the

Customized Fields tab cannot be exported.

7-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 38: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

3. Click Start to export the service.

– End of Steps –

Result

A dialog box pops up, indicating that the file is exported successfully. The content of theexported xls file can be viewed in the exported directory.

7-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 39: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8Managing WDM EquipmentServices in End-to-End ModeTable of Contents

Configuring WDM Services ........................................................................................8-1Modifying WDM Services ...........................................................................................8-9Creating an Ethernet Service....................................................................................8-11

8.1 Configuring WDM Services

8.1.1 Creating WDM Optical Channels

Abstract

Creating a WDM optical channel is to set up an optical channel service between two ends.

Prerequisites

l You have the user permission of "Operator Role" or above.l The “Service View” window appears.l There are available OMS or OTS links between the two ends that you need to create

an optical channel.l There is no optical channel between two ends that you need to create an optical

channel.

Steps1. Right-click the blank area, select New > New WDM Service from the pop-up shortcut

menu.

2. In the New WDM Service pane, select Service Direction, Service Rate, and typeinformation in the User Label field. You can click Choose to view the namingconventions.

3. To select the end A1 and end Z1 for a service, perform the following:

a. Click Choose in the A1 End field. The Resource Selector dialog box appears.

b. Click the name of board where the A1 end is located. Select the port and frequencyin the left pane.

c. Click OK. The New WDM Service window appears.

8-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 40: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

d. To select the end Z1, repeat Steps a through d.

4. Determine whether to select Active and In Service.

Note:

If you select Active, the service is activated. Otherwise, you only create the service.If you select In service, the service is in the service status. Otherwise it is only in themaintenance status.

8-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 41: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8 Managing WDM Equipment Services in End-to-End Mode

5. To select a route for the service, click Constraint in the Route tab.l In the Route Constraint dialog box, click Add and select Network Element.l In the Route Constraint dialog box, click Add and select Board.l In the Route Constraint dialog box, click Add and select Port.l In the Route Constraint dialog box, click Add and select Node CC.

6. Click Compute, the system will calculate the service route service. If the AutoCompute is selected, the system will automatically calculate the route.

8-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 42: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

7. Click Apply to finish the creation.

– End of Steps –

8.1.2 Creating the ODUk Service

Abstract

This section describes how to create an ODUk service link between two ends.

Prerequisites

l You have the user permission of "Operator Role" or above.l The “Service View” window appears.l There are OCH OMS or OTS links between the two ends that you need to create

ODUk.l There is no ODUk service between two ends that you need to create ODUk.l Services have been configured on the two ends that you need to create ODUk.

Steps

1. Right-click the blank area, select New > New WDM Service from the pop-up shortcutmenu. The New WDM Service window appears.

2. Select the ODUk from the Service Rate drop-down list.

3. Type information in the User Label field. You can click Choose to view the namingconventions.

4. To select the end A1 and end Z1 for a service, perform the following:

a. Click Choose in the A1 End field. The Resource Selector dialog box appears.

b. Click the name of board where the A1 end is located in accordance with the serviceproperties.

c. Select an interface that contains port information from the Resource Selectordialog box

d. Click OK. The New WDM Service window appears.

e. Select a port as the A1 end.

f. To select the end Z1, repeat Steps a through d.

5. Determine whether to select Active. If you select Active, the service is activated.Otherwise, you only create the service.

6. If you select In service, the service is in the service status. Otherwise it is only in themaintenance status.

7. Determine whether to select the Config SNCP.l To select the configuration protection, perform the Step 8.l If you do not configure the protection, perform the Step 9.

8-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 43: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8 Managing WDM Equipment Services in End-to-End Mode

8. When you select SNCP Protection. The SNCP protection is selected by default.

a. To set the SNCP start node, in the SNCP Start field, click Choose and select anNE.

b. To set the SNCP end node, in the SNCP End field, click Choose and select anNE.

c. Determine whether to select Create PG.

Note:

Before adding an SNCP protection, make sure that the protection path has beencreated.

9. To select a route for the service, click Constraint in the Route tab.l In the Route Constraint dialog box, click Add and select Network Element.l In the Route Constraint dialog box, click Add and select Board.l In the Route Constraint dialog box, click Add and select Port.l In the Route Constraint dialog box, click Add and select Node CC.

10. Click Compute, the system will calculate the service route service. If the AutoCompute is selected, the system will automatically calculate the route.

8-5

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 44: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

11. Click Apply to finish the creation.

– End of Steps –

8.1.3 Creating an OAC Service

Abstract

This section describes how to create an OAC service link between two ends.

8-6

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 45: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8 Managing WDM Equipment Services in End-to-End Mode

Prerequisites

l You have the user permission of "Operator Role" or above.l The “Service View” window appears.l There are available optical channels between the two ends that you want to create

OAC services.l There is no OAC service between the two ends that you want to create OAC services.l The corresponding service mapping has been configured on the two ends that you

need to create OAC services.

Steps

1. Right-click the blank area, select New > New OAC Service from the pop-up shortcutmenu. The New OAC Service window appears.

2. Type information in the User Label field. You can click Choose to view the namingconventions.

3. Select the from service direction from the Service Direction drop-down list.

4. Select the service rate from the Service Rate drop-down list.

5. To select the end A1 and end Z1 for a service, perform the following steps:

a. Click Choose in the A1 End field. The Resource Selector dialog box appears.

b. Click the NE where the A1 end is located from the Resource Selector dialog box.

c. Click Ok. The Select Terminal Point dialog box appears.

d. Select a port that you want to set as the end A1. ClickOk. TheNewWDMServicewindow appears.

e. To select the end Z1, repeat Steps a through d.

8-7

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 46: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

6. Click Apply to finish the creation.

– End of Steps –

8-8

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 47: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8 Managing WDM Equipment Services in End-to-End Mode

8.2 Modifying WDM Services

8.2.1 Adjusting a WDM Service End

Abstract

For services during maintenance, you may adjust ends in the following three conditions.l You may adjust service ends at different ports on the same board of the same NE.l You may adjust service ends on different boards of the same NE.l The may adjust service ends on different NEs.

Prerequisites

l The path to adjust is in the maintenance status.l The status of the path to adjust is "unstable".l The path to adjust does not bear services.l The services configured with SNCP do not support to adjust ports.

Steps1. In the Service View window, filter services that you want to adjust service ends.

Note:

Refer to the "Querying Services" section for the detailed filtering steps.

2. Right-click the service to adjust, select Configuration > WDM > Adjust End.

3. In the Adjust end area box, set the Adjust source end, Route adjustment end andAdjust destination end.

4. Select Auto Compute in the Route area box.

5. Click Apply to complete the end adjustment.

– End of Steps –

8.2.2 Adjusting a WDM Service Route

AbstractThe non-protection service route adjustment is supported.

Prerequisites

l The services to adjust are “In Maintenance”.l The services configured with SNCP do not support the route adjustment.

8-9

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 48: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Steps

1. In the Service View window, filter services that you want to adjust service route.

Note:

Refer to the "Querying Services" section for the detailed filtering steps.

2. Right-click the path to adjust, select Configuration > WDM > Adjust End.

3. In the Adjust route area box, select Route adjustment end A, Route adjustmentend Z.

4. Select Auto Compute in the Route area box.

5. Click Apply to complete the route adjustment.

– End of Steps –

8.2.3 Deleting the SNCP Protection

Abstract

You may delete the created SNCP protection.

Prerequisites

The service status of SNCP to delete is “In Maintenance”.

Steps

1. In the Service View window, filter services that you want to delete the SNCP.

Note:

Refer to the "Querying Services" section for the detailed filtering steps.

2. Right-click the route that you want to delete the SNCP, select Configuration > Delete> SNCP Protection.

3. In the Route tab in the pop-up Delete SNCP Protection area box, select SectionType, SNCP start end, SNCP termination end. Select Delete protection group forthose sections that have protection groups.

4. Click Apply to delete the SNCP.

– End of Steps –

8-10

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 49: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8 Managing WDM Equipment Services in End-to-End Mode

8.2.4 Adding the SNCP Protection

Abstract

You may add the SNCP protection for services that have not created the protection.

Prerequisites

The service status of SNCP to delete is “In Maintenance”.

Steps

1. In the Service View window, filter services that you want to add the SNCP.

Note:

Refer to the "Querying Services" section for the detailed filtering steps.

2. Right-click the route that you want to add the SNCP, select ConfigurationAdd SNCPProtection.

3. Select parameters to configure in the pop-up Add SNCP Protection area box.

4. In the pop-up Add route section dialog box, select the SNCP start end and the SNCPtermination end.

5. Click OK.

6. In the Route area box, select Auto Compute.

7. Click Apply to complete the operation.

– End of Steps –

8.3 Creating an Ethernet ServiceAbstract

You may create Ethernet services through the end to end method.

Prerequisites

l The ASMA or ASMB boards have been installed.l The link connection has been created.

Steps

1. In the main window, click Service and select Service View.

8-11

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 50: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

2. Right-click the blank area in the Service View window. Select New > New EthernetService from the pop-up menu.

3. The New Ethernet Service window appears, as shown in Figure 8-1. Configureparameters according to Table 8-1.

Figure 8-1 Creating an Ethernet Service

Table 8-1 Ethernet Service Parameters Description 1

Parameter Name Description Remark

Service Type Options:

l EPL

l EVPL

l EPLAN

l EVPLAN

l EPTREE

l EVPTREE

Refer to the “Overview of

Creating an Ethernet Service

on a Site” for the description

of service types.

Parameter Template Select the created template

according to the service type to

create.

After saving the configuration

information, you may

use template to create

another service containing

the same configuration

information. Refer to the

“Service Parameter Template

Management” for details.

8-12

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 51: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 8 Managing WDM Equipment Services in End-to-End Mode

Parameter Name Description Remark

l Hand config

l FULL MESH

l H-VPLS

Only available when you

create EPLAN/EVPLAN.

Application Scene

l Hand config

l TREE

Only available when you

create EPTREE/EVPTREE.

A End Select a board port as the A

end.

Work Z End Select a board port as the Z

end.

Protect Z End Select a board port bearing a

protection service as the Z end.

Only available when you

create EPL/EVPL

NPE - Only available when you

create EPLAN/EVPLAN and

set the “Application Scene” to

“FULL NESH” and “H-VPLS”.

UPE - Only available when you

create EVPLAN and set

the “Application Scene” to

“H-VPLS”.

Root NE Select an NE as the root NE.

Leaf NE Select an NE as the leaf NE.

Only available when you

create EPTREE/EVPTREE

and set the “Application

Scene” to “TREE”.

User Label Type the service label The length is 0–80 bytes.

Click Choose. The namingrules are displayed.

Customer Select the name of customer

that uses the service.

Click Choose. The ResourceSelector dialog appears.

Click Ok.

In Service Select whether the service will

be used immediately.

-

Active Selects whether to activate the

service immediately.

-

4. In the area box below the New Ethernet Service area box. Type the parametersaccording to requirements.

8-13

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 52: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Figure 8-2 Ethernet Service Parameters Description 2

5. Click Apply to complete the operation.

Note:

To configure EPLAN\EVPLAN\EPTREE\EVPTREE services, you must configure threenodes at least. Otherwise, you cannot issue the services to the equipment.

– End of Steps –

8-14

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 53: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 9Maintaining ServicesTable of Contents

Querying Current Alarms ...........................................................................................9-1Querying Current Performances.................................................................................9-1Maintaining Service States .........................................................................................9-2Modifying Services .....................................................................................................9-5Deleting Services .......................................................................................................9-7

9.1 Querying Current AlarmsAbstract

You can query current alarms of a service, including the alarms reported by end-A andend-Z NEs and the NEs through which the service passes.

Prerequisites

l You have the user rights of "Supervisor Role" or above.l You have opened the service view.

Steps

1. Find the service to be configured through the Navigate by Service Domain or Filtertab.

2. Right-click the service record, and then choose Query > Alarm > Current Alarm.

– End of Steps –

Result

The relative alarm information is displayed in the pop-up Current Alarm window.

9.2 Querying Current PerformancesAbstract

You can query current performances of a service, including the performances of end-A andend-Z NEs and the NEs through which the service passes.

9-1

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 54: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Prerequisites

l You have the user rights of "Supervisor Role" or above.l You have opened the service view.

Steps

1. Find the service to be configured through the Navigate by Service Domain or Filtertab.

2. Right-click the service record, and then choose Query > Performance > CurrentPerformance.

– End of Steps –

Result

The relative performance information is displayed in the pop-up Current Performanceinterface.

9.3 Maintaining Service States

9.3.1 Overview

Brief Introduction

For the convenience of service maintenance, the service states in U31 R22 can beclassified into service state, configuration state, and consistent state.

Service State

The service state is changed through devoting/undevoting services, including in service,in maintenance, and out of service.

Configuration State

The configuration state is changed through activating/deactivating services, andissuing/deleting service-related routing information on the NEs, including active, deactive,and partially active.

Consistent State

It refers to the displaying state when U31 R22 monitors services in real-time, includingconsistent, extended, inconsistent, and exception.

9-2

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 55: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 9 Maintaining Services

9.3.2 Activating Services

Abstract

Activation is issuing the routing information of a service to NEs, so that the service canstart operation.

Prerequisites

l You have the user rights of "Operator Role" or above.l You have opened the service view.l The service state of the service is “In Maintenance”.l The consistent state of the service is “Consistent”.l The configuration state of the service is “Deactive” or “Partially Active”.

ContextWhen you activate a service, the routing information of NEs is issued in incremental mode.The activation operation only applies to the current service and has no influence on theservices of other server layers.

The services that support activation include SDH service, EOS Ethernet service, tunnel,PW, and WDM service.

Steps1. Find the service to be activated through the Navigate by Service Domain or Filter

tab.

2. Right-click the service in the service information list, and then choose Operation >Activate from the pop-up menu.

– End of Steps –

ResultThe Config State of the service changes to Active.

9.3.3 Deactivating Services

Abstract

After one or more services are deactivated, the routing information of these services willbe deleted, and the services running on the NE will be interrupted. However, all theseinformation will still be saved on U31 R22.

Prerequisites

l You have the user rights of "Operator Role" or above.l You have opened the service view.

9-3

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 56: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

l The service state of the service is “In Maintenance”.l The consistent state of the service is “Consistent”.l The configuration state of the service is “Active”.

Context

The services supporting this operation include SDH service, EOS Ethernet service, tunnel,PW, and WDM service.

Steps

1. Find the service to be deactivated through the Navigate by Service Domain or Filtertab.

2. Right-click the service in the service information list, and then choose Operation >Deactivate from the pop-up menu.

Warning!

The deactivation operation may cause service interruption in actual operations.

3. Click Yes in the pop-up Confirm dialog box.

– End of Steps –

Result

After the service is activated successfully, the Config State changes to Unactive.

9.3.4 Devoting Services

Abstract

You can devote one or more services in maintenance into service. Devotion switches theservice state on U31 R22, without affecting services on the NEs.

Prerequisites

l You have the user rights of "Operator Role" or above.l You have opened the service view.l The configuration state of the service is “Active”.l The service state of the service is “In Maintenance”.

Steps

1. Find the service to be devoted through the Navigate by Service Domain or Filter tab.

9-4

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 57: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 9 Maintaining Services

2. Right-click the service in the service information list, and then choose Operation >Devote from the pop-up menu.

– End of Steps –

ResultAfter the service is devoted successfully, the Service State changes to In Service.

9.3.5 Undevoting Services

Abstract

You can un-devote one or more services for subsequent maintenance. This operationdoes not affect services running on the NEs.

Prerequisites

l You have the user rights of "Operator Role" or above.l You have opened the service view.l Service state is In Service or Out of Service.

Steps1. Find the service to be operated through the Navigate by Service Domain or Filter

tab.

2. Right-click the service in the service information list, and then choose Operation >Undevote from the pop-up menu.

– End of Steps –

ResultAfter the service is un-devoted successfully, the Service State changes to InMaintenance.

9.4 Modifying Services

9.4.1 Modifying QoS Parameters of a Service

Short Description

This topic describes how to modify the QoS parameters of a service.

Prerequisites

l You have the user rights of “Operator Role” or above.l The service to be modified has been created.

9-5

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 58: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Steps

1. In the Service View, find the service to be modified through the Navigate by ServiceDomain or Filter tab on the left.

2. Right-click the service, and then choose Configuration > Modify ServiceParameters.

3. Set the QoS parameters in one of the following ways.l To set the QoS parameters manually, refer to Step 4.l To import a template, refer to Step 5.

4. Set the QoS parameters manually.

a. Select Forward Bandwidth Limit or Backward Bandwidth Limit.

b. Refer to the table below to configure the related properties.

Parameter Description

CIR Committed Information Rate, in Kbps

CBS Committed Burst Size, in KByte

PIR Peak Information Rate, in Kbps

PBS Peak Burst Size, in KByte

EIR Excess Information Rate, in Kbps

EBS Excess Burst Size, in KByte

5. Import a template.

a. Click Import Template. The Service Parameter Profile Management dialog boxopens.

b. Configure the filter conditions in the Filter Condition area, and then click Filter toobtain the service parameter template that you need.

c. In the Profile Info list, select the service parameter template that you want to use.

d. Click Enter.

The QoS parameters preset in the selected template will be imported into the QoSparameters of the service.

6. Click Apply. The system indicates that the service is modified successfully.

– End of Steps –

9.4.2 Modifying Service Basic Properties in Batches

Prerequisites

l You have the user rights of “Operator Role” or above.l The service to be modified has been created.

9-6

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 59: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 9 Maintaining Services

Steps

1. In the Service View, find the service(s) to be modified through the Navigate byService Domain or Filter tab on the left.

Tip:

You can select multiple services at a time, and then modify their basic properties inbatches.

2. Right-click the service(s) to be modified and then choose Configuration > ModifyProperties in Batch.

3. Select the service basic properties and modify them, including the User Label,Customer, and self-defined properties.

4. Click Apply. The system indicates that the operation is successfully.

– End of Steps –

9.5 Deleting Services

9.5.1 Detaching Services

Abstract

This topic describes how to detach the configuration information of a service on U31R22. The service running on the equipment will not be affected after this operation.The deleted service configuration information can be acquired again through automaticservice discovery.

Prerequisites

l You have the user rights of “Operator Role” or above.l You have opened the service view.l The service state is In Maintenance.

Context

Tip:

For further information on switching and managing the service state, refer to the“Maintaining Service States” section.

9-7

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 60: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

Steps

1. Find the service to be detached through the Navigate by Service Domain or Filtertab on the left side.

2. Right-click the service, and then choose Configuration > Detach Service from thepop-up menu.

3. In the pop-up message box, click Yes to confirm detaching.

– End of Steps –

Result

The system indicates that the operation succeeds, and the service record disappears fromthe service list in the service view.

9.5.2 Deleting Services

Abstract

This topic describes how to delete the configuration information of a service on U31R22 and the equipment. The service running on the equipment will be interrupted afterthis operation. The deleted service configuration information can be restored only byre-configuration.

Prerequisites

l You have the user rights of “Operator Role” or above.l You have opened the service view.l The service state is In Maintenance or Out of Service.

Steps

1. Find the service to be deleted through the Navigate by Service Domain or Filter tabon the left side.

2. Right-click the service, and then choose Configuration > Delete Service from theshortcut menu.

Warning!

This operation will delete the selected service and its client-layer service, and thecorresponding service on the equipment will be deleted. Therefore, perform it afterconfirmation.

3. In the pop-up dialog box, click Yes. The following dialog box appears.

9-8

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 61: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Chapter 9 Maintaining Services

4. Click Confirm.

– End of Steps –

Result

l The system indicates that the operation succeeds, and the deleted service and theclient-layer service that it carries disappear from the service view.

l You cannot find the deleted service by choosing Service > Discover ServiceAutomatically.

9-9

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 62: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

NetNumen™ U31 R22 Operation Guide (WDM/OTN End-to-End Management)

This page intentionally left blank.

9-10

SJ-20110915113509-009|2011-09-30 (R1.0) ZTE Proprietary and Confidential

Page 63: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

FiguresFigure 1-1 Service Explorer ...................................................................................... 1-3

Figure 8-1 Creating an Ethernet Service ................................................................. 8-12

Figure 8-2 Ethernet Service Parameters Description 2............................................ 8-14

I

Page 64: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

Figures

This page intentionally left blank.

Page 65: 09.NetNumen U31 _V12_11_20P01_OperationGuaid(WDM_OTN_E2E)_EN

GlossaryATM- Asynchronous Transfer Mode

MPLS- Multi Protocol Label Switching

OAC- Optical Access

OMS- Optical Multiplex Section

OTS- Optical Transmission Section

III