08 - ma terials handling
TRANSCRIPT
166 - 225
Chain BlocksLever BlocksLifting ClampsMagnetic LiftersElectric HoistsAir HoistsElectric WinchesAir WinchesHand WinchesLever WinchesSpring BalancersLoad IndicatorsHydraulic Spare PartsTrolleysPallet TrucksFabricated Lifting Product - Forklift ApplicationsFabricated Lifting Product - Crane & Overhead Lifting ApplicationsSpreader BeamsExtendable Combination Lifting & Spreader BeamsPipe End CapsPallet LiftingWork CagesLifting HooksFabricated Lifting Product - Oxy/Acetylene HandlingFabricated Lifting Product - Goods Cages
08 -
MA
TE
RIA
LS H
AN
DLI
NG
WWW.BULLIVANTS.COM 167
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Bullivants’ Boss range of hoisting products are all manufactured to AS1418. The BOSS range comes with
Care and use • Always examine the Chain Block carefully before use. Look for cracks or damage, particularly with hooks and load chain. • Keep load chain clean and oiled to prevent undue damage or wear. • When in use, avoid dragging the load chain through dirt or mud. • When the Chain Block is used outdoors or in a corrosive environment, ensure that it is regularly and adequately lubricated. • Do not operate the Chain Block if you do not have a clear view of the bottom block and the load. • Hooks should never be tip loaded. • Never reeve the load chain of a chain or lever block around the load.Prior to use ensure you check the following: • Deformation, damage, bend in the neck of the hook. • Check the suspension pin does not show signs of bending, cracking or wear. • Ensure that the side and suspension plates are free from cracks wear and damage. • Check the load chain is free from nicks, 10% wear, gouges, arc burn, twisted or bent links.
working correctly.
Please note; if the Lever Block or Chain Block does not comply to all the inspection criteria- it must be removed from service immediately - tag it ‘out of service’ and report it!Chain Blocks AS1418.2BOSS Chain Blocks AS 1418.2 are strong, lightweight, robust and are ideal for various commercial
aluminium content as such is suitable for underground mining.Lever Blocks AS1418.2BOSS Lever Blocks AS1418.2 are a sturdy, highly versatile tool for a multitude of lifting, pulling,
has no aluminium as such it means it is suitable for underground mining.
Chain BlocksBOSS Chain Block: Unit of Measure - Each
• Lightweight robust construction. • Stainless steel ID plates and rivets (suitable for underground mining applications). • Proof Tested in accordance with Australian Standards. • Fully machined lift wheel.
• Minimum headroom. • Individually serial numbered for complete traceability. • Galvanized hand chain. • Fully enclosed gear train. • Lower hook complete with thrust race. • Super strength alloy load chain.
OR
DER
CO
DE
Cap
acity
(ton
nes)
Lift
(m)
Effo
rt re
q. (k
g)
Cha
in D
ia. (
mm
)
Hea
droo
m (m
m)
Wid
th (m
m)
Dep
th (m
m)
Top/
Bot
tom
Hoo
k O
peni
ng (m
m)
Wei
ght (
kg)
201136 0.5 3.0 23 6 270 127 131 30 10
201150 0.5 6.0 23 6 270 127 131 30 12
201137 1 3.0 30 6 317 158 140 28 12
201142 1 6.0 30 6 317 158 140 28 14.5
201143 2 3.0 35 8 414 187 161 33.5 22
201144 2 6.0 35 8 414 187 161 33.5 26.5
201145 3 3.0 27 8 465 210 161 40 32
201158 3 6.0 27 8 465 210 161 40 41
201159 5 3.0 41 10 636 253 161 50 46
201161 5 6.0 41 10 636 253 161 50 52
201202 5 10 41 10 636 253 161 50 93.5
201204 10 3.0 39 10 750 373 184 64 68
201206 10 6.0 39 10 750 373 184 64 80
Other capacities and lift sizes available.
1300 722 999168
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB Kito M3 Chain Block: Unit of Measure - EachThe PWB Anchor M3 Series Chain Blocks manufactured by KITO have been designed for maximum durability and safety for continuous heavy duty applications. Available in standard lift heights of 3 and 6 metre, these superior units can also be close coupled to PWB Anchor Push and Geared Trolleys for further reduced headroom. Optional lift heights also available.The 250kg capacity, CX003 Chain Block from KITO is equipped with an Overload Limiter as standard.
OR
DER
CO
DE
Cap
acity
(ton
nes)
Stan
dard
Lift
(m)
Han
d Ef
fort
to L
ift
Max
Loa
d N
(kg)
Hea
droo
m m
in.
(mm
)
Cha
in D
ia. (
mm
) &
No
of F
alls
Wei
ght (
kg)
PWB
Par
t No.
203945 0.25 2.5 147 (15) 217 3.2 x 1 2.4 45377
201174 0.5 3.0 235 (24) 285 5.0 x 1 10.0 43269
203942 0.5 6.0 235 (24) 285 5.0 x 1 14.5 47769
201151 1.0 3.0 284 (29) 295 6.3 x 1 11.5 43271
201186 1.0 6.0 284 (29) 295 6.3 x 1 16.9 47444
203912 1.5 3.0 343 (35) 350 7.1 x 1 14.5 43273
201195 2.0 3.0 353 (36) 375 8.0 x 1 20.0 43275
203913 2.0 6.0 353 (36) 375 8.0 x 1 26.9 47882
201156 3.0 3.0 363 (37) 510 7.1 x 2 24.0 43277
203941 3.0 6.0 363 (37) 510 7.1 x 2 33.6 47883
203914 5.0 3.0 333 (34) 600 9.0 x 2 41.0 43279
203915 5.0 6.0 333 (34) 600 9.0 x 2 54.2 47884
203943 7.5 3.0 343 (35) 770 9.0 x 3 63.0 43281
203916 10.0 3.0 353 (36) 760 9.0 x 4 83.0 49575
203944 10.0 6.0 353 (36) 760 9.0 x4 106.7 49577
PWB Kito M3 With Overload Limiter: Unit of Measure - EachComplementing the existing KITO M3 Series Chain Block range is the ‘Overload Limiter’ model, designed for improved safety and durability.The hoist overload limiter protects the hoist mechanism from damage due to overloading. When an overload is applied to the hoist, the overload limiter actuates to stop lifting.
OR
DER
CO
DE
Cap
acity
Lift
(m)
Hea
droo
m (m
m)
Load
Cha
in D
ia.
(m) x
Fal
l
Mas
s (k
g)
PWB
Par
t No
201527 500kg 3 360 5.0 x 1 10.0 63067
201529 1 tonne 3 410 6.3 x 1 11.5 63068
201531 2 tonne 3 500 8.0 x 1 21.0 63069
201533 3 tonne 3 540 7.1 x 2 24.0 63070
201535 5 tonne 3 640 9.0 x 2 41.0 63071
201528 500kg 6 360 5.0 x 1 10.0 63109
201530 1 tonne 6 410 6.3 x 1 11.5 63063
201532 2 tonne 6 500 8.0 x 1 21.0 63064
201534 3 tonne 6 540 7.1 x 2 24.0 63065
201536 5 tonne 6 640 9.0 x 2 41.0 63066
Model CX Model M3
WWW.BULLIVANTS.COM 169
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • Manufactured in Japan using optimum high quality steel • Designed for long-term use while providing the lowest possible per-use cost • Can be supplied close coupled and extra close coupled to girder trolleys to alleviate headroom restrictions • Optional overload protection • Customised lift heights are available upon request • Quality caged needle bearings • Load chain exceeds Australian Standards with 5:1 Safety FactorApplications • Suitable for industrial, rural, shipbuilding, construction and mining industries
• All Vital models are manufactured to comply with the strict JIS & ISO regulations and AS1418.2
OR
DER
CO
DE
Cap
acity
(ton
nes)
Lift
(m)
Hea
droo
m (m
m)
Mas
s (k
g)
Ove
rload
Pr
otec
tion
Part
No.
201176 0.5 3.0 305 8.6 No VCB053
201153 1.0 3.0 345 11.5 No VCB103
201154 1.5 3.0 370 13.8 No VCB153
201196 2.0 3.0 425 21.6 No VCB203
201157 3.0 3.0 505 23.0 No VCB303
201538 5.0 3.0 635 41.0 No VCB500
201178 0.5 6.0 305 11.6 No VCB050/6
201189 1.0 6.0 345 15.5 No VCB100/6
201194 1.5 6.0 370 18.8 No VCB150/6
201198 2.0 6.0 425 28.6 No VCB200/6
201200 3.0 6.0 505 29.0 No VCB300/6
201539 5.0 6.0 635 54.0 No VCB500/6
201540 10.0 6.0 760 112.0 No VCB910/6
201541 0.5 3.0 305 8.6 Yes VCB051
201542 1.0 3.0 345 11.5 Yes VCB101
201543 1.5 3.0 370 13.8 Yes VCB151
201544 2.0 3.0 425 21.6 Yes VCB201
201545 3.0 3.0 505 23.0 Yes VCB301
201546 5.0 3.0 635 41.0 Yes VCB501
201547 7.5 3.0 740 60.5 Yes VCB751
201548 10.0 3.0 760 78.0 Yes VCB911
201549 15.0 3.0 850 150.0 Yes VCB916
201550 20.0 3.0 870 190.0 Yes VCB621
Other heights of lift also available.
1300 722 999170
08 -
MA
TE
RIA
LS H
AN
DLI
NG
extensive range is suited for many applications in the mining, construction, industrial and automotive industry. A patented Overload Limiting device is available for all sizes to improve safety. These chain blocks have it all; better quality, easy to use, improved safety and all of this with reduced cost.Features
• High strength end stop with secondary end anchor for increased safety. • “T” type hooks for improved load holding integrity (except for the 250kg capacity). • Gear system design for reduced effort when lifting loads. • Includes a specially designed hand wheel to eliminate hand chain slippage and pocket wear. • Encapsulated needle bearings and side plate bearings for smoother operation. • Brake lockout bearing for security of braking mechanism. • Key internal components are CNC machined before being heat-treated and toughened. • Fitted with high quality European zinc plated Grade 80 load chain. • No aluminium content which ensures suitability for mining applications.
OR
DER
CO
DE
Cap
acity
Lift
Hei
ght (
m)
Test
Loa
d (k
g)
Effo
rt to
lift
full
load
(N)
No.
of F
alls
Han
d C
hain
(m
m x
mm
)
Han
d C
hain
D
rop
(m)
Load
Cha
in
(mm
x m
m)
Net
Wei
ght f
or
3m L
ift (k
g)
Part
No.
204175 250 kg 3 375 190 1 Ø5 x 23.7 2 Ø4 x 12 6 PCB301
204176 250 kg 6 375 190 1 Ø5 x 23.7 5 Ø4 x 12 6 PCB302
204177 500 kg 3 750 210 1 Ø5 x 23.7 2 Ø5 x 15 9 PCB303
204178 500 kg 6 750 210 1 Ø5 x 23.7 5 Ø5 x 15 9 PCB306
204179 1 tonne 3 1500 285 1 Ø5 x 23.7 2 Ø6.3 x 19 12 PCB313
204180 1 tonne 6 1500 285 1 Ø5 x 23.7 5 Ø6.3 x 19 12 PCB316
204181 1.5 tonne 3 2250 325 1 Ø5 x 23.7 2 Ø7.1 x 21 14 PCB318
204182 1.5 tonne 6 2250 325 1 Ø5 x 23.7 5 Ø7.1 x 21 14 PCB319
204183 2 tonne 3 3000 355 1 Ø5 x 23.7 2 Ø8 x 24 20 PCB323
204184 2 tonne 6 3000 355 1 Ø5 x 23.7 5 Ø8 x 24 20 PCB326
204185 3 tonne 3 4500 340 2 Ø5 x 23.7 2 Ø7.1 x 21 23 PCB333
204186 3 tonne 6 4500 340 2 Ø5 x 23.7 5 Ø7.1 x 21 23 PCB336
204187 5 tonne 3 7500 400 2 Ø5 x 23.7 2 Ø9 x 27 39 PCB353
204188 5 tonne 6 7500 400 2 Ø5 x 23.7 5 Ø9 x 27 39 PCB356
204189 10 tonne 3 15000 540 4 Ø5 x 23.7 2 Ø9 x 27 65 PCB359
204190 10 tonne 6 15000 540 4 Ø5 x 23.7 5 Ø9 x 27 65 PCB360
WWW.BULLIVANTS.COM 171
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Lever BlocksBOSS Lever Block: Unit of Measure - Each • Stainless steel ID plates and rivets (suitable for underground mining applications). • Fully machined lift wheel. • Lightweight robust construction. • Minimum headroom. • Proof tested in accordance with Australian Standards. • Cast steel safety latches.
• Individually serial numbered for complete traceability. • Spare parts available. • Fully enclosed gear train. • Super strength alloy load chain. • Twin pawl ratchet system.
OR
DER
CO
DE
Cap
acity
(ton
nes)
Lift
(m)
Han
dle
(mm
)
Cha
in D
ia. (
mm
)
Hea
droo
m (m
m)
Wid
th (m
m)
Dep
th (m
m)
Top/
Bot
tom
Hoo
k O
peni
ng (m
m)
Wei
ght (
kg)
201146 0.25 1 300 4 230 92 72 21 1.5
201147 0.5 1.5 300 5 260 105 78 35 4
201139 0.75 1.5 280 6 325 148 90 30 7
201166 0.75 3 280 6 325 148 90 30 8.8
201140 1.5 1.5 410 8 380 172 98 35 11
201222 1.5 3 410 8 380 172 98 35 14
201141 3.0 1.5 410 10 480 200 115 40 21
201231 3.0 3 410 10 480 200 115 40 25.2
201149 6.0 1.5 410 10 620 200 115 50 21
201241 6.0 3 410 10 620 200 115 52 31
201244 9.0 1.5 410 10 700 200 115 58 46
Other capacities and lift sizes available.
- The load chain in a lever hoist is designed to be used in a straight load only (Example 1)
- Hooks are to be AXIALLY loaded not TIP loaded (Example 2)
Example 1 Example 2
1300 722 999172
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB Kito L5 Lever Block: Unit of Measure - Each
The PWB Anchor L5 Series Lever Hoist from KITO offers the largest range of capacities in the market that best suit your application.Lightweight, compact and designed for heavy-duty work in the most rigorous and demanding applications. All models feature the patented ‘free-wheel safety brake mechanism’ and nickel plated load chain.Optional lift heights also available.Compact and portable the 250kg and 500kg capacity units are an ideal Lever Hoist for lifting, lowering or positioning of loads that can be carried and stored in your toolbox.250kg Capacity Unit supplied with polyester carry case for belt attachment.
OR
DER
CO
DE
Cap
acity
(ton
nes)
Stan
dard
Lift
(m)
Han
d Ef
fort
to L
ift
Load
N (k
g)
Han
dle
Leng
th
(mm
)
Hea
droo
m m
in
(mm
)
Wei
ght (
kg)
PWB
Par
t No.
201406 0.25 1.0 200 (20) 150 205 1.6 44200
201407 0.5 1.2 310 (31) 180 246 2.6 44201
201167 0.8 1.5 284/(29) 245 280 5.7 44202
203839 1.0 1.5 353/(36) 245 300 5.9 44203
201225 1.6 1.5 333/(34) 265 335 8 44204
201408 2.5 1.5 363 (37) 265 375 11.6 44205
201236 3.2 1.5 363/(37) 415 395 15 44206
201402 6.3 1.5 372 (38) 415 540 27.0 44207
201403 9.0 1.5 382 (39) 415 680 42.0 44208
201409 0.8 3.0 284 (29) 245 280 6.5 45890
201410 1.6 3.0 333 (34) 265 335 8.5 45891
201411 3.2 3.0 363 (37) 415 395 15.5 45892
201412 6.3 3.0 372 (38) 415 540 30.0 45893
PWB Kito L5 With Overload Limiter: Unit of Measure - Each
Complementing the existing KITO L5 Lever Hoist range is the ‘Overload Limiter’ model, designed for improved safety and durability. These models prevent the hoist mechanism from damage in the event of overload by activating the overload limiter via the friction clutch.
OR
DER
CO
DE
Cap
acity
Hea
droo
m (m
m)
Load
Cha
in D
ia
(m) x
Fal
l
Mas
s (k
g)
PWB
Par
t No
201518 800kg 280 5.6 x 1 6.0 63090
201519 1 tonne 300 5.6 x 1 6.2 63091
201520 1.6 tonne 335 7.1 x 1 8.4 63092
201522 2.5 tonne 375 8.8 x 1 11.6 63093
201523 3.2 tonne 395 10 x 1 15.2 63094
201525 6.3 tonne 540 10 x 2 26.2 63095
201526 9 tonne 680 10 x 3 40.2 63096
Model LX Model L5
WWW.BULLIVANTS.COM 173
08 -
MA
TE
RIA
LS H
AN
DLI
NG
• Manufactured in Japan using optimum high quality steel • One-touch operation for free chain adjustment (NR-Series) • Easy two-step operation to prevent accidental free-wheeling (VR-Series) • Vital lever blocks can be supplied with overload protection for added security of use (excluding 250kg and 500kg models) • The unique design of the bottom hook prevents slipping and ensures safe operation
relevant standards • Exceeds Australian Standards with 5:1 Safety Factor • Minimum load requirement of up to 10% of the Working Load Limit to ensure the operation of the braking system. E.g. a 1.5 tonne lever block requires a minimum load of 150kg (NR Series) • Light loading; the NR-Series is not suitable for tandem operations. For these applications we recommend the Vital Lever Blocks VR-2 seriesApplications • Suitable for industrial, rural, shipbuilding, construction and mining industries
• All Vital models are manufactured to comply with the strict JIS & ISO regulations and AS1418.2
OR
DER
CO
DE
Cap
acity
(ton
nes)
Load
Cha
in
Dia
met
er (m
m)
Lift
(m)
Mas
s (k
g)
Serie
s
Part
No.
201210 0.5 5.0 1.5 3.5 NR VLB205
201148 0.8 5.6 1.5 6.0 NR VLB207
201216 1.0 6.3 1.5 7.2 NR VLB210
201171 1.6 7.1 1.5 9.8 NR VLB215
201172 3.2 9.0 1.5 16.6 NR VLB230
201239 6.3 9.0 1.5 27.0 NR VLB260
201589 9.0 9.0 1.5 47.3 NR VLB290
201165 0.8 6.3 1.5 6.9 VR VLB107
201414 1.6 7.1 1.5 9.7 VR VLB115
201415 3.2 9.0 1.5 16.3 VR VLB130
201416 6.3 9.0 1.5 26.7 VR VLB160
201590 0.8 5.6 1.5 6.0 NR with Overload VLB207L
201591 1.0 6.3 1.5 7.2 NR with Overload VLB210L
201592 1.6 7.1 1.5 9.8 NR with Overload VLB215L
201593 3.2 9.0 1.5 16.6 NR with Overload VLB230L
201594 6.3 9.0 1.5 27.0 NR with Overload VLB260L
201595 9.0 9.0 1.5 47.3 NR with Overload VLB290L
201596 0.8 6.3 1.5 6.9 VR with Overload VLB107L
201597 1.6 7.1 1.5 9.7 VR with Overload VLB115L
201598 3.2 9.0 1.5 16.3 VR with Overload VLB130L
201599 6.3 9.0 1.5 26.7 VR with Overload VLB160L
Other heights of lift available.
NR Series
1300 722 999174
08 -
MA
TE
RIA
LS H
AN
DLI
NG
affordable price. They are well suited for applications in the mining, construction, transport and automotive industry. A patented Overload Limiting device is available to improve safety.Features
• “T” type hooks for improved load holding integrity (except for the 250kg capacity). • New design double pawl safety springs to eliminate sticking. • New style cast hand wheel for added strength and durability. • Encapsulated needle bearings and side plate bearings for smoother operation. • Brake lockout bearing for security of braking mechanism.
(except 250kg). • Key internal components are CNC machined before being heat-treated and toughened. • Fitted with high quality European zinc plated Grade 80 load chain. • No aluminium content which ensures suitability for mining applications.
OR
DER
CO
DE
Cap
acity
Lift
Hei
ght (
m)
Test
Loa
d (k
g)
Effo
rt to
Lift
Ful
l Lo
ad (N
)
No.
of F
alls
Load
Cha
in (m
m
x m
m)
Leng
th o
f Lev
er
Han
dle
(D) (
mm
)
Net
Wei
ght f
or 3
m
Lift
(kg)
No.
204205 250kg 1.5 375 115 1 Ø4 x 12 168 1.86 PLB302
204206 500kg 1.5 750 248 1 Ø5 x 15 253 4.42 PLB305
204207 800kg 1.5 1200 285 1 Ø5.6 x 17 273 5.71 PLB308
204208 1.6 tonne 1.5 2400 315 1 Ø7.1 x 21 378 9.27 PLB316
204209 3.2 tonne 1.5 4800 360 1 Ø10 x 28 418 16.50 PLB332
204210 6.3 tonne 1.5 9450 370 2 Ø10 x 28 418 21.29 PLB363
Lifting ClampsPush Trolley: Unit of Measure - Each • Lightweight robust construction. • Complete assembly instructions supplied. • Individually serial numbered for complete traceability. • Minimum headroom.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Bea
m ra
nge
(mm
)
Test
Loa
d (k
N)
Wei
ght (
kg)
203247 0.5 64-152 7.35 7
203245 1 64-210 14.71 14
203248 2 89-210 29.42 21
203249 3 102-210 44.13 35
203250 5 114-210 61.29 48
203278 10 125-210 122.58 88
Other capaciities available.
WWW.BULLIVANTS.COM 175
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Geared Trolley
• Lightweight robust construction. • Complete assembly instructions supplied. • Individually serial numbered for complete traceability. • Minimum headroom.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Bea
m ra
nge
(mm
)
Test
Loa
d (k
N)
Wei
ght (
kg)
203261 1 64-210 14.71 18
203246 2 89-210 29.42 26
203262 3 102-210 44.13 41
203265 5 114-210 61.29 54.5
203268 10 125-210 122.58 95
Beam Trolley Clamp: Unit of Measure - Each
• Fully adjustable. • Fitted with adjustment safety locking mechanism
• Safe, quick and easy to install and use. • Complies with AS1418.2.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Bea
m ra
nge
(mm
)
Wei
ght (
kg)
203252 1 63-210 10.5
203254 2 76-210 12.5
203255 3 76-210 22.5
203256 5 100-305 42
Girder Clamp: Unit of Measure - Each
• Robust all-steel construction. • Low weight. • Individually serial numbered for complete traceability. • Quick and easy adjustment to suit any beam width and range. • Compact size - ease of installation. • Minimum headroom.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Bea
m ra
nge
(mm
)
Wei
ght (
kg)
203284 1 75-230 4.5
203285 2 75-230 5
203286 3 80-320 10.5
203287 5 90-320 11
203298 10 90-320 16
• Fitted with safety locking mechanism - ensures safe process of lifting. • Minimal working parts - minimal maintenance requirements. • Easy operation - ease of use.
your nearest Bullivants branch. • Individually serial numbered for complete traceability.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Wei
ght (
kg)
203281 1 0-22 3.6
203282 2 0-30 6
203291 3 0-35 9.2
203292 5 5-45 16.5
1300 722 999176
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Gunnebo LiftiQ Pipe hooks: Unit of Measure - Each
For horizontal lifting and transporting of steel and concrete pipes.To be used in pairs.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Tota
l Len
gth
(mm
)
Wei
ght (
kg)
204044 1.5 40 185 1.6
204045 3.0 40 185 1.6
204046 4.0 50 180 3.0
204047 6.0 50 180 3.3
204048 8.0 70 200 3.6
204049 8.0 60 330 18.0
203810 12 70 200 6.0
For horizontal lifting and transporting of steel plates.Must allways be used in pairs or multiples thereof.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Tota
l Len
gth
(mm
)
Wei
ght (
kg)
203997 1 0-35 188 2.6
203998 2 0-60 290 7.5
203999 3 0-60 293 8.0
204000 4 0-60 306 13.0
204001 6 0-60 306 13.0
204002 8 0-60 335 18.0
204003 10 0-60 335 20.0
204004 12 0-60 335 21.0
Available with enlarged jaw opening: 2,000 - 15,000 kg capacities
Unit of Measure - Each
For vertical lifting and transporting of steel plates and structures.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Tota
l Len
gth
(mm
)
Wei
ght (
kg)
204005 1.0 0-25 265 3.6
204050 1.5 0-20 335 6.3
204006 2.0 0-35 335 6.5
204007 3.0 0-35 335 6.7
204008 4.5 0-45 430 16.0
204009 6.0 0-32 490 18.6
204051 7.5 0-55 530 25.0
204010 9.0 0-55 530 26.0
204011 12 0-52 617 42.0
204012 15 0-76 550 71.0
204013 20 0-80 880 140
204014 25 5-85 880 140
Available with enlarged jaw opening: 2,000 - 30,000 kg capacities
WWW.BULLIVANTS.COM 177
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
For vertical lifting and transporting of steel plates and structures from all positions (horizontal, vertical & sidelong).Equipped with articulating lifting shackle.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Tota
l Len
gth
(mm
)
Wei
ght (
kg)
204015 1.0 0-25 285 3.9
204052 1.5 0-20 350 7.2
204016 2.0 0-35 380 7.3
204017 3.0 0-35 385 7.5
204018 4.5 0-45 425 17
204019 6.0 0-32 520 21
204053 7.5 0-55 560 30
204020 9.0 0-55 650 32
204021 12 0-52 650 45
204022 15 0-76 635 75
204023 20 0-80 830 145
204024 25 5-85 830 148
Available with enlarged jaw opening: 2,000 - 25,000 kg capacities
Gunnebo LiftiQ Universal Screw Clamps: Unit of Measure - Each
For vertical and horizontal lifting and transporting of a large variety of steel structures.Articulating lifting eye ensures an effective clamping force in every position.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Tota
l len
gth
(mm
)
Wei
ght (
kg)
204054 0.5 0-28 113 0.8
204055 0.75 0-22 201 3
204056 1.5 0-32 187 4
204057 3 0-50 224 7
204058 6 0-75 291 18
Unit of Measure - Each
For lifting, handling and transporting of steel, aluminium, wood and marble plates.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
(mm
)
Tota
l len
gth
(mm
)
Wei
ght (
kg)
204026 0.5 1-20 360 5.5
204027 1 1-30 400 6.5
204028 1.5 1-40 400 7.2
204029 2 1-50 660 14
204030 3 1-60 660 15
1300 722 999178
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB Push & Geared TrolleysDesigned to travel along RSJ, universal beams and universal columns, the PWB Anchor range of push and geared trolleys suits a variety of beam widths to provide the easiest and most convenient means to moving a load.PWB Push Trolley: Unit of Measure - Each
OR
DER
CO
DE
Cap
acity
Bea
m R
ange
(mm
)
Hea
droo
m (m
m)
Whe
el D
ia. R
unni
ng
Surf
ace
(mm
)
Min
. Rad
ius
(m)
PWB
Par
t No
204130 250kg 32 - 51 86 48 0.9 44439
204131 500kg 64 - 152 110 58 0.9 49175
204132 500kg 64 - 210 110 58 0.9 49353
204133 500kg 210 - 270 110 58 0.9 49354
204134 1 tonne 64 - 210 136 88 0.9 49176
204135 1 tonne 210 - 268 136 88 0.9 49355
204136 1 tonne 268 - 330 136 88 0.9 49282
204137 2 tonne 89 - 210 155 100 1.5 49177
204138 2 tonne 210 - 268 155 100 1.5 44103
204139 2 tonne 268 - 330 155 100 1.5 44641
204140 3 tonne 102 - 210 200 130 1.8 49178
204141 3 tonne 210 - 268 200 130 1.8 49179
204142 3 tonne 268 - 330 200 130 1.8 49696
204143 4 tonne 102 - 210 200 130 1.8 49338
204144 5 tonne 114 - 210 252 155 2.4 49180
204145 5 tonne 210 - 268 252 155 2.4 49181
204146 5 tonne 268 - 330 252 155 2.4 49296
204148 10 tonne 127 - 210 288 195 3.7 49182
204149 10 tonne 210 - 330 288 195 3.7 49760
PWB Geared Trolley: Unit of Measure - Each
OR
DER
CO
DE
Cap
acity
Bea
m R
ange
(mm
)
Hea
droo
m (m
m) *
Whe
el D
ia. R
unni
ng
Surf
ace
(mm
)
Min
. Rad
ius
(m)
PWB
Par
t No
**
204151 1 tonne 64 - 210 136 88 0.9 49183
204153 2 tonne 89 - 210 155 100 1.5 49184
204154 2 tonne 210 - 268 155 100 1.5 44102
204155 3 tonne 102 - 210 200 130 1.8 49185
204156 3 tonne 210 - 268 200 130 1.8 49186
204157 3 tonne 268 - 330 200 130 1.8 62318
204158 4 tonne 102 - 210 200 130 1.8 49605
203266 5 tonne 114 - 210 252 155 2.4 49187
204159 5 tonne 210 - 268 252 155 2.4 49188
204160 5 tonne 268 - 330 252 155 2.4 49625
204162 10 tonne 127 - 210 288 195 3.7 49189
203269 10 tonne 210 - 330 288 195 3.7 64124
204163 20 tonne 210 - 330 270 150 NA 64125
hanger plate.** 2.5 metre standard drop hand chain (optional lengths available on request).
WWW.BULLIVANTS.COM 179
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB Girder Clamps: Unit of Measure - EachFeaturing a single threaded adjustment pin, for simple and easy installation,
OR
DER
CO
DE
Cap
acity
Bea
m R
ange
(m
m)
Hea
droo
m
(min
/mm
)
Hea
droo
m
(max
/mm
)
Susp
ensi
on
Pin.
Dia
. (m
m)
Wei
ght (
kg)
PWB
Par
t No
204164 1 tonne 65 - 230 78 135 20.3 4.8 48246
203296 2 tonne 65 - 230 78 135 20.3 5.5 48247
204165 3 tonne 100 - 250 100 160 22.1 11.8 48248
204166 5 tonne 100 - 320 119 159 40.0 16.0 48249
204167 10 tonne 130 - 320 150 205 53.0 31.0 48476
Model SBB Features Include:
red ring indicates when tightening force is achieved) • For horizontal and vertical lifting applications • Spring type pressure lock locking device • Twin shackle allows movement in both directions • Double safety feature with screw type vice and automatic clamping mechanism
• Clamp screw and swivel jaw made of alloy steel and induction hardened • Tightening force must be minimum of 150kgf-cm • Conforms to AS4991
OR
DER
CO
DE
WLL
(ton
nes)
Effe
ctiv
e Th
ickn
ess
(mm
)
Har
dnes
s R
ange
Wei
ght (
kg)
Mod
el
204032 0.5 1-40 Hv 85-320 1.8 SBB-05
204033 1.0 1-40 Hv 85-320 4.0 SBB-1
204034 2.0 1-40 Hv 85-320 7.6 SBB-2
204035 3.0 5-35 Hv 85-320 8.3 SBB-3
204036 5.0 10-40 Hv 85-320 14.3 SBB-5
Model SBBA Features Include:
red ring indicates when tightening force is achieved) • Suitable for most bisalloy steel • Spring type pressure lock locking device • Twin shackle allows movement in both directions • Double safety feature with screw type vice and automatic clamping mechanism
• Clamp screw and swivel jaw made of alloy steel and induction hardened • For steel plate with higher hardness range • Tightening force on SBBA must be minimum of 300kgf-cm • Conforms to AS4991
OR
DER
CO
DE
WLL
(ton
nes)
Effe
ctiv
e Th
ickn
ess
(mm
)
Har
dnes
s R
ange
Wei
ght (
kg)
Mod
el
204037 0.5 1-40 Hv 85-600 1.8 SBBA-05
204038 1.0 1-40 Hv 85-600 4.0 SBBA-1
204039 2.0 1-40 Hv 85-600 7.6 SBBA-2
204040 3.0 5-35 Hv 85-600 8.3 SBBA-3
1300 722 999180
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB Drum ClampsThree designs are available to provide safe, fast lifting and repositioning of 205 Litre (44 gallon) drums, with or without lids.Features Include: • Main body made of high tensile steel with welded construction that is resistant to cracks • Design factor 5:1 • Manufactured in accordance with test requirements of AS4991
• Drum clamp for drums with lids.
OR
DER
CO
DE
Dru
m S
ize
(litr
es)
Cap
acity
(to
nnes
)
Hea
droo
m
(mm
)
Wei
ght (
kg)
200 0.5 152 5
• Horizontal drum clamp for lifting drums with lids.
OR
DER
CO
DE
Dru
m S
ize
(litr
es)
Cap
acity
(to
nnes
)
Hea
droo
m
(mm
)
Wei
ght (
kg)
Susp
ensi
on
hole
Dia
(mm
)
203283 200 0.5 152 5 50
• Vertical drum tong for lifting drums without lids.
OR
DER
CO
DE
Dru
m S
ize
(litr
es)
Cap
acity
(to
nnes
)
Hea
droo
m
(mm
)
Wei
ght (
kg)
203294 200 0.5 520 12.5
• Designed for pipe beams.
• Suited for min. curve radius of 0.8m
OR
DER
CO
DE
Cap
acity
(kg)
Bea
m ra
nge
(mm
)
Wei
ght (
kg)
Part
No.
203747 300 60 2.5 PPT203
Unit of Measure - Each
• For horizontal lifting and transportation of non-sagging steel plates. • Compact shape, low weight and high lifting capacity. • Must be used in pairs (or multiples of). • Fitted with optional spring mechanism to ensure jaw remains in contact with place in a no-load situation
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Max
. Pla
te
Wid
th (k
g)
Part
No.
204221 2 0 - 60 CLP516
203313 3 0 - 60 CLP531
204223 3 60 - 120 CLP536
203317 6 0 - 60 CLP561
204225 6 60 - 120 CLP571
204222 9 0 - 60 CLP091
204227 9 60 - 120 CLP096
WWW.BULLIVANTS.COM 181
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
• Subject to rigorous quality control for maximum reliability • Market leader world wide
all products • All ‘IP’ vertical plate clamps may be used to lift materials with a hardness of up to 345 Brinell (37 Rc)This model is based on the IP10 lifting clamp but is equipped with a universal (hinged) hoisting eye, thus making it possible to lift loads from any given direction. The IPU 10 clamp is also very useful in applications where larger plates are to be lifted with two clamps in combination with a two-legged chain.
OR
DER
CO
DE
WLL
(ton
nes)
(mm
)
Mod
el
Part
No.
203978 0.5 0-16 0.5-IPU10 CLP005
203979 1 0-20 1-IPU10 CLP010
203980 2 0-35 2-IPU10 CLP020
203981 3 0-40 3-IPU10 CLP030
203982 4.5 0-40 4.5-IPU10 CLP040
203983 6 0-50 6-IPU10 CLP060
203984 9 0-50 9-IPU10 CLP070
203985 9 50-100 9-IPU10/J CLP071
203986 12 0-54 12-IPU10 CLP080
203987 12 54-108 12-IPU10/J CLP081
• Complies with Australian Standard AS4991. • Subject to rigorous quality control for maximum reliability.
all products. • Bears the CE mark for quality.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Wei
ght (
kg)
Part
No.
203293 0.5 300 7.1 CLP910
Other capacities available.
Features • Can be used to safely suspend a chain block or hoist from an I - beam • Also suitable for lifting I - beams, usually in pairs • Can be used at up to 45° angle, derated by 50% • Adjustable to suit a wide range of girder sizes • Can be easily repositioned and are simple to install by
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Bea
m R
ange
(m
m)
Hea
droo
m
(mm
)
Mas
s (k
g)
Part
No.
204097 1.0 80 - 245 150 3.5 PGC310
204098 2.0 80 - 245 155 4.5 PGC320
204099 3.0 90 - 310 225 9.5 PGC330
204100 5.0 90 - 310 225 11.0 PGC350
204101 10.0 90 - 310 235 16.0 PGC390
1300 722 999182
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
Features
range of angle sections and will prove to be a cost-effective way of suspending loads. They feature an adjustable locking pin for safe and easy attachment which makes them ideally suited for the rigging industry. All clamps are designed and tested in accordance with Australian Standard AS4991. • Designed and tested in accordance with Australian Standard AS4991. • Quick and easy installation with no tools required. • Suitable for a wide range of angle sections. • Inclusive of an adjustable locking pin for safe and easy attachment. • Features a V-type clamping jaw which secures the clamp to the angle section. • A cost-effective and time saving way of suspending loads. • This clamp can be used as both an anchor and suspension device. • Ideal for the rigging industry.
OR
DER
CO
DE
Rat
ed
Cap
acity
Bea
m S
ize
(mm
)
Wei
ght (
kg)
Part
No.
204171 500 kg 38 - 101 4.0 CLP253
204172 1 tonne 38 - 101 4.5 CLP254
204173 1.5 tonne 50 - 152 11.0 CLP255
204174 3 tonne 101 - 203 21.5 CLP256
Unit of Measure - Each
Features
in accordance with Australian Standard AS1418.2. The spring assisted locking pin enables quick and easy installation which makes this trolley ideally suited for the rigging industry. • Designed and tested in accordance with Australian Standard AS1418.2. • Quick and easy installation with no tools required. • Suitable for a wide range of beam sizes. • Inclusive of a spring assisted locking pin for safe and easy attachment to the beam. • A cost-effective and time saving way of suspending loads. • Ideal for the rigging industry.
OR
DER
CO
DE
Rat
ed
Cap
acity
Bea
m S
ize
(mm
)
Wei
ght (
kg)
Part
No.
204216 3 tonne 76 - 230 21 CLP250
204217 6 tonne 100 - 305 32 CLP251
204218 10 tonne 120 - 305 47.5 CLP252
Features
quick and easy installation is required with no use of tools. They are suited to a wide range of beam sizes and the Low
headroom is restricted. The locking pin with articulated handle will make this device easy to attach. Both the Standard and
accordance with Australian Standard AS4991. • Designed and tested in accordance with Australian Standard AS4991. • Quick and easy installation with no tools required. • Suitable for a wide range of beam sizes.
where headroom is restricted. • Inclusive of a locking pin with articulated handle for safe
• A cost-effective and time saving way of suspending loads. • This clamp can be used as both an anchor and suspension device. • Ideal for the rigging industry.
OR
DER
CO
DE
Rat
ed
Cap
acity
Hea
d R
oom
Bea
m S
ize
(mm
)
Wei
ght (
kg)
Part
No.
204219 200kg Standard 90 - 204 5.8 CLP257
204220 200kg 90 - 180 4.5 CLP258
Standard Top Girder Clamp
Girder Clamp
WWW.BULLIVANTS.COM 183
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
Features • Choose from either push or hand-geared travel
than single pin variety • Available to suit larger beam widths on request • Fitted with anti-drop plates for improved safety and compliance
with AS1418.2.
OR
DER
CO
DE
Cap
acity
(ton
nes)
Bea
m R
ange
(mm
)
Min
. Cur
ve R
adiu
s
Min
. Bea
m R
adiu
s (m
m)
Hea
d¬ro
om (m
m)
Type
Part
No.
204102 0.5 62 - 170 0.8 1500 67 Push PPT105
203274 1.0 62 - 203 1.0 1500 82 Push PPT110
204103 2.0 90 - 215 1.5 1800 130 Push PPT120
203277 3.0 107 - 210 1.7 1800 130 Push PPT130
204104 5.0 107 - 210 1.7 1800 130 Push PPT150
204105 10.0 160 - 310 2.7 3000 160 Push PPT160
204106 1.0 62 - 203 1.0 1500 67 Geared PGT110
204107 2.0 90 - 215 1.5 1500 82 Geared PGT120
203264 3.0 107-210 1.7 1800 130 Geared PGT130
204108 5.0 107 - 210 1.7 1800 130 Geared PGT150
204109 10.0 160 - 310 2.7 3000 160 Geared PGT160
Features • Fits most 205L steel and plastic drums • Capable of extracting a drum from a cluster • Cast, using high quality dectile iron; conformed to Australian Standards (S.G. Iron 500/7 to AS141831) • Holds up to 1T easily • Robust and withstands harsh conditions
• Complies with the Australian Standard AS4991.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Part
No.
203988 1 PDG100
Unit of Measure - Each
Features • Easy innovative way to safely decant with decreased risk of spillage and harm to user • Allows the safe pouring of liquids from 15L to 25L plastic containers and 44 gallon metal drums • Commended by Safety AuthoritiesApplicationsIdeally used in agriculture, food manufacturing, hospitality, cleaning, chemical, horticulture, pool, spa and general manufacturing
OR
DER
CO
DE
Cap
acity
Fini
sh
Part
No.
204125 15 - 25L Powdercoated SAF225
204126 205L Powdercoated SAF230
1300 722 999184
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • 360° manual radial slew; with slipper bearing thrust race for ease of slewing motion • Rugged structure with low maintenance powder
• Folds down when not in use • Allows accurate placement of heavy loads, even
• Available with manual winch, 12 or 24 volt electric winch • Optional drum lifting devices available
OR
DER
CO
DE
Cap
acity
(kg)
Ope
ratio
n
Part
No.
204123 300 Manual - Hand MYT300
204115 300 Electric - 12V MYT312
204228 300 Electric - 24V MYT324
NGK Grip Clamp: Unit of Measure - Each
For bare copper cable, covered conductor and messenger wire.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Grip
Ran
ge
(mm
)
Eye
Size
(mm
)
Wei
ght (
kg)
203288 1 4-22 32 1.2
203289 2 5-25 32 2.5
203290 2 4-22 32 1.3
203307 3 8-22 34 3.2
203308 4 13-28 25 5
Magnetic Lifters
Features • Can be used in a variety of industries for the transportation and lifting of steel, engine parts, semi - manufactured goods and moulds • Due to its magnetic force there is no need to use slings, clamps or other holding devices eliminating surface damage • Once operated, the simple switch safety button design allows for one handed operation with the added unique release button guard for extra protection • Larger sizes available up to six tonnes • Permanent magnets require Minimal maintenance
• Complies to AS4991:2004
OR
DER
CO
DE
Cap
acity
(kg)
H
oriz
onta
l Pla
te
Cap
acity
(kg)
Ve
rtic
al P
late
Cap
acity
(kg)
R
ound
Bar
Forc
e (k
g)
Mas
s (k
g)
No.
204067 100 50 50 350 3 MAG010
203744 300 150 150 1050 10 MAG030
203745 600 300 300 2100 24 MAG060
203805 1000 500 500 3500 50 MAG100
204068 2000 800 800 7000 125 MAG200
204229 3000 1200 1200 10500 240 MAG300
204230 6000 1800 1800 21000 440 MAG600
WWW.BULLIVANTS.COM 185
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Electric Hoists
PWB Anchor ER2 Electric Hoists have been designed for superior load handling and positioning accuracy.Features Include: • 60% ED Intermittent rating (Duty Cycle) • Aluminium “corrosion” resistant body • Upper-Lower limit switch provided as standard • Dust proof and water-jet proof protection IP55 rating • Thermal protection to prevent motor from overheating • Original design, push button control with emergency stop - IP65 rating • Digital Hour Counter for appropriate maintenance • Grade 80 Nickle Plated load chain • Friction clutch for overload protection and over winding • Current-driven electromagnetic brake for secure load holding • Up to 50T Capacity available • Complies to AS1418.2 • Longer height of lifts are available on requestPWB Kito ER2 Electric Chain HoistWith safety, durability and ease of maintenance, the PWB Anchor ER2 Electric Chain Hoist manufactured by KITO is environmentally
and lower limit switches, CH (Counter/Hour) meter and variable speed inverter as standard equipment.Available in capacities ranging from 250kg to 20 tonnes, in lift heights to suit your application.
Unit of Measure - EachAustralian Standard AS1418.2, ASME HST (USA) H4 Duty Class.
OR
DER
CO
DE
Mod
el N
o
Cap
acity
(ton
nes)
Stan
d.Li
ft (m
)
Lift
Spee
d (m
/min
.)
Hea
droo
m H
ook
Susp
ende
d m
in
(mm
)
Load
Cha
in (d
ia x
fa
lls)
Wei
ght (
kg)
PWB
Par
t No.
201417 ER2-003S 0.25 3.0 9.1 350 4.3 x 1 27.0 45801
201418 ER2-003S 0.3 6.0 9.1 350 4.3 x 1 28.3 45961
201419 ER2-005L 0.5 3.0 3.8 370 6.0 x 1 33.0 45802
201420 ER2-005L 0.5 6.0 3.8 370 6.0 x 1 35.4 45962
201421 ER2-005S 0.5 3.0 7.3 370 6.0 x 1 37.0 45803
201422 ER2-005S 0.5 6.0 7.3 370 6.0 x 1 35.4 45963
201423 ER2-010L 1.0 3.0 3.5 430 7.7 x 1 47.0 45804
201424 ER2-010L 1.0 6.0 3.5 430 7.7 x 1 51.0 45964
201425 ER2-010S 1.0 3.0 7.1 430 7.7 x 1 54.0 45805
201426 ER2-010S 1.0 6.0 7.1 430 7.7 x 1 51.0 45965
201427 ER2-015S 1.5 3.0 4.5 510 10.2 x 1 72.0 45806
201428 ER2-015S 1.5 6.0 4.5 510 10.2 x 1 79.0 64121
201429 ER2-020L 2.0 3.0 3.7 575 10.2 x 1 73.0 45807
201430 ER2-020L 2.0 6.0 3.7 575 10.2 x 1 80.0 45966
201431 ER2-020S 2.0 3.0 7.0 590 10.2 x 1 91.0 45808
201432 ER2-025S 2.5 3.0 5.7 625 11.2 x 1 104.0 45809
201433 ER2-030S 3.0 3.0 4.4 785 10.2 x 2 107.0 45810
201434 ER2-030S 3.0 6.0 4.4 785 10.2 x 2 121.1 63130
201435 ER2-050S 5.0 3.0 2.9 850 11.2 x 2 132.0 45811
201436 ER2-050S 5.0 6.0 2.9 850 11.2 x 2 148.8 62866
*5 metre power supply cable (plug not included)
1300 722 999186
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Model EDL Model EDCL
EDL Electric Hoists are built to world class standards offering, reduced headroom, single die cast corrosion protected aluminium body and uncompromised safety standards. • 30% ED Rating • IP54/dust proof and water protected • Standard 240v 10amp power supply • Patented “Friction Clutch” allows for reliable Overload Protection and Safety • Upper Limit Switch • Motor has high performance mechanical brake for safe stopping • Nickel plated load chain – Added Resistance to rust and wear • Complies with AS1418.2 • New IP65 Pendant with E/Stop • Special Cylinder Type for one hand operation • Dual Speed Hoists have a speed adjustment • Lightweight aluminium compact body
OR
DER
CO
DE
Cap
acity
(kg)
Mod
el
Stan
dard
Lift
(m)
Lift
Spee
d (m
/m
in.)
Hea
droo
m (m
m)
Load
Cha
in D
ia.
(mm
) x F
alls
Wei
ght (
kg)
PWB
Par
t No.
Single Speed - Pendant
201448 100 EDL10S 3.0 13.0 315 4.0 x 1 12 45398
201449 160 *EDL16S 3.0 20.0 330 4.0 X 1 16 48347
201450 180 EDL18S 3.0 8.0 315 4.0 x 1 12 45399
201451 240 *EDL24S 3.0 13.5 330 4.0 x 1 16 48348
201452 480 EDL48S 3.0 6.7 520 4.0 x 2 21.5 62445
Dual Speed - Pendant
201453 100 EDL10ST 3.0 13.0/3.0 315 4.0 x 1 12.5 45400
201454 160 *EDL16ST 3.0 20.0/5.0 330 4.0 x 1 16.5 44282
201455 180 EDL18ST 3.0 8.0/3.0 315 4.0 x 1 12.5 45401
201456 240 *EDL24ST 3.0 13.5/3.0 330 4.1 x 1 16.5 48349
201457 480 EDL48ST 3.0 6.7/2.0 520 4.0 x 2 21.5 63624
Dual Speed - Cylinder
201458 100 EDCL10SD 3.0 13.0/3.0 945 4.0 x 1 15 45402
201459 160 EDCL16SD 3.0 20.0/4.0 960 4.0 x 1 19 44157
201460 240 EDCL24SD 3.0 13.5/3.0 960 4.0 x 1 19 44209
PWB ANCHOR ENTERTAINMENT RANGEThe range of CM Lodestar and Prostar Entertainment Hoists from PWB Anchor are easy to handle, operate
WWW.BULLIVANTS.COM 187
08 -
MA
TE
RIA
LS H
AN
DLI
NG
The CM Lodestar is the ‘Riggers Choice’ and used extensively within the Entertainment Industry in all types of venues and applications. Supplied in lift heights to suit your requirements.
Cap
acity
Mod
el
Lift/
Spee
d
Load
Cha
in D
ia
(mm
) x fa
ll
Hea
droo
m (m
m)
500kg F 4 6.3 x 1 413
1 tonne L 4 7.9 x 1 472
2 tonne R 4 7.9 x 2 613
2 tonne RR 2 7.9 x 2 613
Other models and capacities available on request.
The CM Prostar model is designed and built for the unique rigging applications encountered at small venues. Lightweight, quiet and portable also featuring an overload protection device. Supplied in lift heights to suit your requirements.
Cap
acity
Mod
el
Lift/
Spee
d (m
/m
in.)
Load
Cha
in
(mm
)
Hea
droo
m
(mm
)
250kg 250 4 3.98 281
Other models and capacities available on request.
PWB Entertainment Clamp: Unit of Measure - Each
Entertainment Hoist range.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Bea
m R
ange
(m
m)
Hea
droo
m
(min
./mm
)
Hea
droo
m
(max
./mm
)
Susp
ensi
on
Wei
ght (
kg)
PWB
Par
t No.
204170 1 tonne 65-230 78 135 20.3 4.8 45785
PWB Entertainment Shackle: Unit of Measure - EachThe range of PWB Anchor Entertainment products is now extended to include Entertainment Shackles.
with the requirements of Australian Standard AS2741, these Shackles represent an easy and effective way of providing a connection of chain, wire rope or other rigging equipment.
OR
DER
CO
DE
Size
(mm
)
WLL
(ton
nes)
d (m
m)
D (m
m)
W (m
m)
L (m
m)
B (m
m)
e (m
m)
PWB
Par
t No.
122709 13 2.0 13 15 21 48 33 33 41794
122710 16 3.25 16 20 27 61 43 40 41795
122711 19 4.75 19 22 32 72 51 48 41796
1300 722 999188
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - EachAustralian Standard AS1418.2, ASME HST (USA) H4 Duty Class.
OR
DER
CO
DE
Mod
el N
o
Cap
acity
(ton
nes)
Stan
d.Li
ft (m
)
Lift
Spee
d (m
/min
.)
Hea
droo
m H
ook
Susp
ende
d m
in (m
m)
Load
Cha
in (d
ia x
falls
)
Wei
ght (
kg)
PWB
Par
t NO
.
201437 ER2-003IS 0.3 3.0 10.8 - 1.8 350 4.3 x 1 27 45821
201438 ER2-003IL 0.5 3.0 4.5 - 0.8 370 6.0 x 1 32 45822
201439 ER2-005IS 0.5 3.0 8.5 - 0.8 370 6.0 x 1 36 45823
201440 ER2-010IL 1.0 3.0 4.2 - 0.7 430 7.7 x 1 45 45824
201441 ER2-010IS 1.0 3.0 8.2 - 1.4 430 7.7 x 1 52 45825
201442 ER2-015IS 1.5 3.0 5.3 - 0.9 510 10.2 x 1 72 45826
201443 ER2-020IL 2.0 3.0 4.3 - 0.7 575 10.2 x 1 73 45827
201444 ER2-020IS 2.0 3.0 8.2 - 1.4 590 10.2 x 1 89 45828
201445 ER2-025IS 2.5 3.0 6.6 - 1.1 625 11.2 X 1 100 45829
201446 ER2-030IS 3.0 3.0 5.2 - 0.9 785 10.2 X 2 105 45830
201447 ER2-050IS 5.0 3.0 3.3 - 0.6 850 11.2 X 3 128 45831
*5 metre power supply cable (plug not included)
Unit of Measure - EachFor use with PWB Anchor ER2 Electric hoist range.Wide beam models are available on request.
OR
DER
CO
DE
Mod
el N
o
Cap
acity
(to
nnes
)
Trav
el S
peed
(m
/min
.)
Opt
iona
l Tra
vel
Spee
d (m
/min
.)
Min
. Rad
uis
Bea
m R
ange
(m
m)
PWB
Par
t No.
203989 MR2-010S 1.0 20.0 10.0 0.8 58 - 153 Flg 45901
203990 MR2-020S 2.0 20.0 10.0 0.8 82 - 178 Flg 45902
203991 MR2-030S 3.0 20.0 10.0 1.0 100 - 178 Flg 45903
203992 MR2-050S 5.0 20.0 10.0 1.8 100 - 178 Flg 45904
203993 MR2-010IS 1.0 20.0/4.0 n/a 0.8 58 - 153 Flg 45921
203994 MR2-020IS 2.0 20.0/4.0 n/a 0.8 82 - 178 Flg 45922
203995 MR2-030IS 3.0 20.0/4.0 n/a 1.0 100 - 178 Flg 45924
203996 MR2-050IS 5.0 20.0/4.0 n/a 1.8 100 - 178 Flg 45925
combination shown.
WWW.BULLIVANTS.COM 189
08 -
MA
TE
RIA
LS H
AN
DLI
NG
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Lift
(m)
Hoi
stin
g Sp
eed
(m/
min
.)
Volta
ge
Type
Part
No.
201551 0.25 3.0 5.0 0.25 240 Single phase/Single speed HEH900201552 0.5 3.0 3.6 0.32 240 Single phase/Single speed HEH907201553 1.0 3.0 2.3 0.40 240 Single phase/Single speed HEH911201554 2.0 3.0 1.1 0.40 240 Single phase/Single speed HEH920201555 0.25 6.0 5.0 0.25 240 Single phase/Single speed HEH905201556 0.5 6.0 3.6 0.32 240 Single phase/Single speed HEH909201289 2.0 6.0 1.1 0.40 240 Single phase/ Single speed HEH916201557 0.25 6.0 5.0 0.25 240 Single phase/ Single speed HEH925201558 0.25 3.0 10.0 0.45 415 3 - phase/Single speed HEH010201559 0.5 3.0 7.2 0.63 415 3 - phase/Single speed HEH050201285 1.0 3.0 4.6 0.80 415 3 - phase/Single speed HEH100201560 1.0 3.0 7.1 1.30 415 3 - phase/Single speed HEH110201561 2.0 3.0 2.3 0.80 415 3 - phase/Single speed HEH200201562 2.0 3.0 6.8 2.40 415 3 - phase/Single speed HEH210201563 3.0 3.0 4.1 2.40 415 3 - phase/Single speed HEH300201564 5.0 3.0 2.8 2.40 415 3 - phase/Single speed HEH500201565 0.25 6.0 10.0 0.45 415 3 - phase/Single speed HEH015201566 0.5 6.0 7.2 0.63 415 3 - phase/Single speed HEH055201567 1.0 6.0 4.6 0.80 415 3 - phase/Single speed HEH105201568 1.0 6.0 7.1 1.30 415 3 - phase/Single speed HEH115201569 2.0 6.0 2.3 0.80 415 3 - phase/Single speed HEH205201570 2.0 6.0 6.8 2.40 415 3 - phase/Single speed HEH215201571 3.0 6.0 4.1 2.40 415 3 - phase/Single speed HEH305201572 5.0 6.0 2.8 2.40 415 3 - phase/Single speed HEH505201573 0.25 3.0 7.2/1.8 0.32 415 3 - phase/Two speed HEH020201574 0.5 3.0 7.2/1.8 0.63 415 3 - phase/Two speed HEH060201575 1.0 3.0 4.6/1.2 0.80 415 3 - phase/Two speed HEH120201576 2.0 3.0 6.8/1.7 2.40 415 3 - phase/Two speed HEH220201577 2.0 3.0 2.3/0.6 0.80/0.20 415 3 - phase/Two speed HEH230201578 3.0 3.0 4.0/1.0 2.40/0.60 415 3 - phase/Two speed HEH330201579 5.0 3.0 2.8/0.7 2.4/0.60 415 3 - phase/Two speed HEH530201580 0.25 6.0 7.2/1.8 0.32/0.08 415 3 - phase/Two speed HEH025201581 0.5 6.0 7.2/1.8 0.63/0.16 415 3 - phase/Two speed HEH065201582 1.0 6.0 4.6/1.2 0.80 415 3 - phase/Two speed HEH125201583 2.0 6.0 2.3/0.6 0.80 415 3 - phase/Two speed HEH225201584 2.0 6.0 6.8/1.7 2.40 240 3 - phase/Two speed HEH235201585 3.0 6.0 4.0/1.0 2.40/0.60 415 3 - phase/Two speed HEH335201586 5.0 6.0 2.8/0.7 2.40/0.60 415 3 - phase/Two speed HEH535
Unit of Measure - EachFeatures • 3 phase models vary from 250kg to 15 tonne capacity and single phase from 250kg to 2 tonne. All models operate on 24V AC low volt control • Safety Limits: full current and shunt limit switches operate in both directions of hook travel • Patented overload limiter
self-adjusting disc type brake to the gearbox and the ‘F’ models have an additional auxiliary centrifugal brake
• High quality Grade 80 zinc plated load chain supplied as standard
• IP54 protection rating on all electric hoists and trolleys. Pendants IP65 • Motor thermal protection on all Hitachi models • Optional radio remote control • Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models • Special low headroom hoist and trolley arrangements available to suit tight headroom applications
standard to reduce wear and ensure suitability for curved beam applications
• All Hitachi models are manufactured to comply with AS1418.2
1300 722 999190
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • IP65 Rated pendant with 24V control for operator safety • IP54 Protection rating • Overload protection • Upper and lower electrical limit switches • Motor thermal protection • Durable Grade 80 zinc plated load chain supplied as standard
• Complies to AS1418.2
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Lift
(m)
Hoi
stin
g Sp
eed
(m/m
in.)
Mas
s (k
g)
Part
No.
204079 0.25 3.0 12/3 0.6 30 PEH025
204080 0.50 3.0 10/2.5 1.1 42 PEH050
204081 1.00 3.0 8/2 1.5 57 PEH100
204082 2.00 3.0 4/1 1.5 62 PEH200
Features • Lifts small engines, tools, boxes or anything up to 500kg, suited for various workplaces • Perfectly portable with detachable pendant and chain bucket complete with unique compact carrying case • Adjustable speeds when accurate control is required • Easy to operate low voltage control with E - stop • Features mechanical brake and overload clutch with easy adjustability • Hoist - lower limit switch • 240V Single phase operation
• Complies to AS1418.2
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Cha
in S
ize
(mm
)
Hoi
stin
g Sp
eed
(m/m
in.)
Mas
s (k
g)
Type
Part
No.
201610 0.08 4.0 4.8 - 18.0 17.5 Single phase PPH080
201611 0.125 4.0 3.2 - 12.5 17.5 Single phase PPH125
201612 0.25 4.0 3.2 - 12.5 17.5 Single phase PPH240
201613 0.50 4.0 1.6 - 6.3 20.6 Single phase PPH500
Other heights of lift available.
WWW.BULLIVANTS.COM 191
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
Features • Automatic upper limit switch; when rope disc touches the limit arm, hoisting is automatically stopped • Dynamic and mechanical brake providing instant and safe braking • Convenient 240V single phase power supply • Sensor arm automatically activates lower limit switch to stop motor if rope is underwound • Supplied with 3m power lead and industry plug, 10m heavy duty IP65 waterproof pendant control and wire rope with 360° weighted hook with safety latchApplications • Suitable for warehouses, construction sites and factories
• CE Compliance
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Lift
(m)
Hoi
stin
g Sp
eed
(m/m
in.)
Volta
ge
Part
No.
201506 0.08 35 30 0.80 240 CWS080
201507 0.16 40 22 1.20 240 CWS160
201313 0.23 24 14 1.30 240 CWS230
201537 0.30 24 13 1.50 240 CWS300
Optional mounting arm CRH - 0710 available on request (not available for CWS - 300).Optional push trolley mount CRH - 0720 available on request (not available for CWS - 300).
Unit of Measure - Each
Features • Provided with 24V AC contractors, motors 415V AC 3-phase IP54 • Optional single or dual speed, motor thermal protection included • Customised wider beam widths available on request
OR
DER
CO
DE
Cap
acity
(kg)
Spee
d (m
/m
in.)
Bea
m R
ange
(m
m)
Part
No.
204083 500 10 75 - 125 PET050
204084 1000 10 75 - 125 PET100
204085 2000 10 100 - 150 PET200
204086 500 75 - 125 PET055
204087 1000 75 - 125 PET105
204088 2000 100 - 150 PET205
Unit of Measure - Each
Features • Provided with 24V AC contactors, including transformer • Motors 415V AC 3-phase IP54 • Optional single or dual speed • Customised wider beam widths available on request
OR
DER
CO
DE
Cap
acity
(kg)
Spee
d (m
/m
in.)
Bea
m R
ange
(m
m)
Hea
droo
m
(mm
)
Part
No.
204089 1000 10.5 74 - 125 126 HET100
204090 2000 10.5 100 - 150 130 HET200
204091 3000 10.5 100 - 150 140 HET300
204092 5000 10.5 125 - 175 177 HET500
1300 722 999192
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Minifor®: Unit of Measure - EachA complete range of electric hoists for a wide range of applications, portable and powerful for unlimited heights of lift. • WLL 100 kg to 950 kg • Unlimited height of lift • Unloaded wire rope freely suspended or optional rope reeler • Pendant control or radio operation • Direct lift or sheaving kit for increased capacity • Single phase or 3 phase motorQuality and Powerful • High power to weight ratio • Body in aluminium alloy • Unlimited length of lifting wire ropeSafety • Upper and lower adjustable end limit stops • Motor integrated brake • HP5 wire rope, dia. 6.5 mm
Air Hoists: Unit of Measure - Each
Suitable for use in hazardous environments, PWB Anchor EHL Air Hoists from
bodies, for easy handling in a variety of industrial and construction applications.Available in high and low speed models, in either cord or pendant controls with optional lift heights.Complies to AS1418.2.
OR
DER
CO
DE
Cap
acity
Lift
Spee
d
(m/m
in)
Lift
(m)
Hea
droo
m
(mm
)
Con
trol
Typ
e
Mod
el
PWB
Par
t No.
201465 125kg 12.0 3 790 Pendant AT - 125K 44519
201466 500kg 10.5 3 365 Pendant EHL05TSP 49251
201261 1 tonne 5.2 3 440 Pendant EHL1TWP 49253
122707 1 tonne 6.0 3 480 Pendant EHL1TSP 63538
122106 2 tonne 3.0 3 540 Pendant EHL2TWP 48238
201468 3 tonne 3.0 3 585 Pendant EHL3TSP 44181
122708 6 tonne 1.5 3 770 Pendant EHL6TWP 47609
201255 500kg 10.5 3 365 Cord EHL05TSC 49250
122108 1 tonne 5.2 6 440 Cord EHL1TWC 64591
201260 1 tonne 5.2 3 440 Cord EHL1TWC 49252
201497 1 tonne 6.0 3 480 Cord EHL1TSC 48237
122105 2 tonne 3.0 3 540 Cord EHL2TWC 48239
122109 2 tonne 3.0 6 540 Cord EHL2TWC 65728
201467 3 tonne 3.0 3 585 Cord EHL3TSC 44998
201269 6 tonne 1.5 3 770 Cord EHL6TWC 45000
122107 6 tonne 1.5 6 770 Cord EHL6TWC 61692
Maximum recommended pendant length of 8 metres.
Pendant Control
Cord Control
WWW.BULLIVANTS.COM 193
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB Endo MTW Series Air Trolley: Unit of Measure - EachSuitable for General use and most hazardous environments.Used in conjunction with the EHL Air Hoist. The compact MTW Air Trolley is designed for easy handling and high speed performance. Available in Pendant control with 2 directional functions. Complies to AS1418.2.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Trav
el S
peed
(m
/min
)
Bea
m R
ange
(m
m)
Min
bea
m
radu
is (m
m)
Con
trol
Typ
e
Wei
ght (
kg)
Mod
el
204041 1.0 28.0 75 -125 Flg 3500 Pendant 35.0 MTH-1T
204042 2.0 18.0 125 - 150 Flg 1000 Pendant 63.0 MTH-2T
204043 6.3 19.0 150 - 190 Flg 2500 Pendant 127.0 MTH-6.3T
Designed with a Wire Rope lift, the Endo EHW Air Hoist is available in hook or pendant control with a cone brake system. Suitable for General use and most hazardous environments. Complies to AS1418.2.
OR
DER
CO
DE
Cap
acity
(kg)
Stan
dard
Lift
(m)
Lift
Spee
d (m
/min
)
Hea
droo
m H
ook
Susp
ende
d m
in
(mm
)
Con
trol
Typ
e
Wei
ght (
kg)
Mod
el
201503 120 2.0 16.0 680 On hook 9.5 EHW-120
201253 120 2.0 16.0 630 Pendant 9.7 EHW-120R
201505 250 2.0 11.0 745 Pendant 18.2 EHW-250R
recommended.
1300 722 999194
08 -
MA
TE
RIA
LS H
AN
DLI
NG
JDN Mini: Unit of Measure - Each
Features • Designed with patented motor - brake system and robust aluminium housing • Consists of only a few components resulting in low and easy maintenance • Easy to handle and move due to its small headroom and lightweight design • Comes complete with variable speed pendant, chain bucket, emergency stop and optional limit switch
and girder clamps • 100% Duty cycle • Manufactured in Germany, under strict quality control with demanding tolerancesApplications • Suitable for lifting, mining, chemical, oil and gas, construction, shipbuilding, offshore and pharmaceutical
• Complies to AS1418.2 • CE Compliance
OR
DER
CO
DE
Cap
acity
(kg)
Lift
(m)
Spee
d (m
/m
in.)
Con
trol
Hea
droo
m
(mm
)
Part
No.
204093 125 3.0 15 Pendant 328 JDN123
204094 250 3.0 8 Pendant 328 JDN253
204095 500 3.0 10 Pendant 458 JDN503
204096 980 3.0 5 Pendant 458 JDN603
Other heights of lift available.Optional travel case available for 125kg and 250kg models.
JDN: Unit of Measure - Each
Features • Tough compact construction • Immune from dust, mud, heat and vapours • 100% Duty cycle • Manufactured in Germany, under strict quality control with demanding tolerances • Only six atmospheres of compressed air required, excluding models 1.5Ti and 3Ti/2 which can operate between 4.5 - 6 atmospheres of compressed air • Cord control, F control or brass pendant control available, as well as an electro pneumatic interface for Radio Remote control as an option • Optional chain buckets • Subsea version availableApplications • Suitable for lifting, mining, chemical, oil and gas, construction, shipbuilding, offshore and pharmaceutical
• Complies to AS1418.2 • CE Compliance
OR
DER
CO
DE
Cap
acity
(kg)
Lift
(m)
Spee
d (m
/m
in.)
Con
trol
Hea
droo
m
(mm
)
Part
No.
204231 250 3 20 Cord 450 JDN705
201470 500 3 11.0 Cord 450 JDN706
201471 1000 3 5.5 Cord 450 JDN715
201472 2000 3 2.7 Cord 498 JDN725
201473 3200 3 5.0 Cord 593 JDN735
201474 6300 3 2.5 Cord 674 JDN765
201587 1600 3 4 - 6 Cord 480 JDN719
201588 3200 3 2 - 3 Cord 544 JDN732
204232 16000 3 1.0 Cord 898 JDN785
201475 10000 3 1.6 Cord 815 JDN775
201476 20000 3 0.7 Cord 1030 JDN795
Pendant control available on request.Range of specialised mining hoists also available and larger capacities up to 100 tonne.Other heights of lift available.
WWW.BULLIVANTS.COM 195
08 -
MA
TE
RIA
LS H
AN
DLI
NG
JDN ‘M’ series air hoists have been specially developed for underground operations where loads must not only be lifted and lowered but also pulled horizontally. Due to their multiple applications they are also deployed in most
with only 4 bar of air pressure. • Manufactured in Germany under strict quality control with demanding tolerances • Low maintenance design delivers 100% duty cycle in all environmental conditions • Insensitive to dust, humidity and temperatures ranging from -20°C up to approx. + 70°C. • Cast iron housing suitable for severe conditions. • ATEX Approved models for use in dangerous and explosive environments. • Fail safe brake in case of air supply failure. • Oil free operation allows use in clean areas.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Lift
Spee
d (m
/m
in)
Lift
(m)
Wei
ght (
kg)
Mod
el
201477 1-2 3-1.5 3 60 JDN991
201478 3-6 2.2-1.1 3 100 JDN990
1300 722 999196
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Electric Winches
Available in 4 models featuring power-in, power-out, controlled freewheeling clutch and automatic brake.
the emergency crank handle is supplied as standard equipment.Remote Control kits are also available.
OR
DER
CO
DE
Mod
el
Volts
/Am
ps
Load
Cap
acity
(k
g)
Gea
r Rat
io
Cab
le F
itted
PWB
Par
t No.
201616 SA5000DC 12V DC / 70A 681 189:1 5mm x 6m 45077
201617 SA7000DC 12V DC / 70A 999 189:1 5mm x 15m 45078
201618 SA9000DC 12V DC / 70A 1362 570:1 5.5mm x 7.5m 45079
201619 SA12000DC 12V DC / 70A 2043 570:1 5.5mm x 15m 45076
Available in 2 models featuring power-in and controlled freewheel operation, mechanical brake and clutch control knob.TW Series models are equipped with a 6m x 50mm polyester strap and hook.Emergency crank handle supplied as standard with TW9000 Model.
OR
DER
CO
DE
Mod
el
Volts
/Am
ps
Load
Cap
acity
(k
g)
Gea
r Rat
io
Stra
p Fi
tted
PWB
Par
t No.
201620 TW4000DC 12V DC / 40A 681 324:1 6m x 50mm 43579
201621 TW9000DC 12V DC / 70A 1362 570:1 6m x 50mm 43580
WWW.BULLIVANTS.COM 197
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • Electric lifting or hauling • Precision engineered, rugged construction • Available in single and 3 - phase models • Brakes designed for both static and dynamic loading, applying automatically in the event of power loss • Compact load - sharing design of the heat treated planetary gear ensures quiet operation and long life • Lightweight and compact • 24V AC low volt control available in all CP and CWG modelsApplications • Suitable for portable use
OR
DER
CO
DE
Cap
acity
(kg)
Spee
d (m
/m
in.)
Volta
ge
Wire
Rop
e Si
ze (m
m x
m)
Mas
s (k
g)
Mod
el T
ype
Part
No.
203903 200 11 - 16 240 5 x 46 30 CWL CWL200
203904 200 11 - 16 240 5 x 71 33 CWL CWL205
204233 300 16 - 25 240 6 x 60 40 CWL CWL305
203864 200 10 - 15 240 6 x 30 32 CP ACW200
203862 250 10 - 15 240 6 x 30 34 CP ACW250
204234 300 10 - 15 240 6 x 30 38 CP ACW300
204235 500 10 - 15 240 7 x 60 55 CP ACW305
204236 750 10 - 15 415 9 x 60 135 CP ACW310
201314 300 12 - 19 240 6 x 60 42 CWG ACW320
201608 300 10 - 15 415 6 x 30 32 CWG ACW345
201315 400 12 - 18 240 9 x 60 120 CWG ACW330
203865 500 12 - 18 415 9 x 60 120 CWG ACW350
201316 900 13 - 20.6 415 10 x 60 185 CWG ACW375
201609 1100 14 - 25 415 12 x 100 250 CWG ACW565
201319 1500/2500 4.0/2.5 240 7 x 12 60 CAP CAP250
203806 2200 6.9 - 12.6 415 16 x 100 400 CWG ACW750
1300 722 999198
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
Features • Compact, powerful and robust • 12V and 24V Reversible permanent magnetic motor allowing low amp draw and low level sound • Ratchet braking to securely hold the load • Hand - held pendant with 4m cord suppliedApplications • Suitable for small trucks and utilities to eliminate the need for manual lifting, truck mounted jib cranes, raising tailgates
• CE Compliance
OR
DER
CO
DE
Cap
acity
(kg)
Mot
or
Spee
d - N
o Lo
ad (m
/min
.)
Wire
Rop
e (m
m x
m)
Mas
s (k
g)
Part
No.
204237 120 24V/100W 5 4.0 x 5 17 PDH125
201374 120 12V/100W 5 4.0 x 5 17 PDH120
201310 300 12V/300W 5 4.8 x 12 27 PDH300
201375 300 24V/300W 5 4.8 x 12 27 PDH305
203841 500 12V/500W 4 6.2 x 12 27 PDH500
203842 500 24V/500W 4 6.2 x 12 27 PDH505
Unit of Measure - Each
Features • Power In/Out with free - spooling clutch • Inbuilt four - way roller fairlead • Hand - held remote with 3m cable • Battery cable with circuit breaker for over - current protection and integrated solenoid pack for complete protection of wiringsApplications • Suitable for launching boats, emergency vehicles, self - recovery and general farm use, 4 - wheel driving • NOT recommended for lifting applications
• CE ComplianceO
RD
ER C
OD
E
Line
Pul
l (kg
)
Spee
d - N
o.
Load
(m/M
in.)
Wire
Rop
e (m
m x
m)
Mas
s (k
g)
Part
No.
201376 1134 5.0 4.8 x 15.2 13.5 DV2500
201377 1588 6.5 5.5 x 15.2 13.9 DV3500
201317 2041 6.5 6.3 x 15.2 14.2 DV4500I
201378 4082 13.4 8.3 x 30.5 36.0 DV9
Larger sizes available on request.
Unit of Measure - EachFeatures • Robust and compact • Designed for long life under extreme operating conditions • Two - stage planetary gear for fast line speed • Automatic load - holding brake and sliding ring gear clutch for free spooling • Larger sizes available on requestApplications • Suitable for heavy duty applications on 4WD, tractors,
• CE Compliance
OR
DER
CO
DE
Line
Pul
l (kg
)
Spee
d (m
/M
in.)
Gea
r Rat
io
Rop
e Si
ze
(mm
x m
)
Mas
s (k
g)
Part
No.
204075 3630 15 16.0:1 11.1 x 27 43.3 PHV090
204076 4535 14 16.0:1 12 x 34 46.6 PHV100
204077 5440 10 19.4:1 14 x 27 87 PHV120
204078 6800 9 19.4:1 16 x 24 80 PHV150
WWW.BULLIVANTS.COM 199
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Hand WinchesPWB Dutton Lainson WinchesPWB Anchor range of hand operated Winches manufactured by the Dutton-Lainson Company are best suited for recreational and marine trailers, along with horizontal pulling or lifting applications.All Dutton-Lainson Winches have been permanently lubricated drive shaft bearings and all welded and brazed construction for greater strength.Offered in a selection of plain ratchet and brake type models featuring laminated, hardened drive gears for longer life, heavy duty steel handles with ergonomic hand grips and rigid welded reels that accept either wire rope cable or webbing straps.
shaft bearings.
standard zinc plated trivalent chrome process and 30% greater corrosion
This DL Series of Hand Winches are ideally suited to boat trailers and other pulling applications that require the free-wheeling feature of ratchet type winches.
shaft bearings.
OR
DER
CO
DE
Rat
ed C
apac
ity
(kg)
Dru
m H
ub D
ia.
(mm
)
Gea
r Rat
io
Han
dle
Leng
th
(mm
)
Rev
ersi
ble
Rat
chet
Mod
el
Drum Capacity (max.)
Cable Strap
201495 272 16 3.2:1 178 No DL600A 4mm x 18.5m 5m x 50mm
201498 408 16 3.2:1 178 No DL900A 5mm x 12m 5m x 50mm
201614 499 22 3.7:1 178 No DL1100A 5mm x 24m 9m x 50mm
201499 590 22 4.4:1 178 No DL1300A 5.5m x 18m 9m x 50mm
201615 635 22 4.4:1 242 Yes DL1402A 6mm x 40m 9m x 50mm
201371 817 28.5 5.4:1 242 Yes DL1800A 7mm x 18m 11.5m x 50mm
201341 1134 28.5 17.3:1/5.4:1 242 Yes DL2500A 8mm x 15m 11.5m x 50mm
201501 1134 28.5 17.3:1/5.4:1 242 Yes DL2500AB 8mm x 15m 11.5m x 50mm
PWB DLB Series Load-Brake Winches: Unit of Measure - EachThe Dutton-Lainson DLB Series Load-Brake Winches feature an automatic self-locking friction plate brake, which supplies a constant, positive holding action for additional safety and control and can be mounted in either the vertical or horizontal position.DLB Series winches require a minimum operating load and are supplied in
OR
DER
CO
DE
Rat
ed C
apac
ity
(kg)
Dru
m H
ub D
ia.
(mm
)
Gea
r Rat
io
Han
dle
Leng
th
(mm
)
Mod
el
Drum Capacity (max.)
Cable Strap
201324 363 48 4.4:1 178 DLB800A 5mm x 21m 8m x 50mm
201496 545 64 5.4:1 178 DLB1200A 5.5mm x 21m 9m x 50mm
201334 681 64 5.4:1 238 DLB1500A 6mm x 18m 9m x 50mm
NOTE: Wire Cable or Web Straps NOT Included on Winches.
1300 722 999200
08 -
MA
TE
RIA
LS H
AN
DLI
NG
PWB B Series Brake Winches: Unit of Measure - EachThe B Series Brake Winches have all the features of the DLB Series with the additional features including extra heavy duty construction. Drive shaft needle
B Series winches require a minimum operating load and are supplied in copper
OR
DER
CO
DE
Rat
ed C
apac
ity
(kg)
Dru
m H
ub D
ia.
(mm
)
Gea
r Rat
io
Han
dle
Leng
th
(mm
)
Min
. Loa
d (k
g)
Mod
el
Drum Capacity (
max.)
Cable
201333 681 28.5 6:1 311 68 B1500 6mmx16m
201340 1135 34 12:1 311 136 B2500 8mmx15.5m
PWB Industrial Load Brake Winch: Unit of Measure - EachPWB Anchor Industrial Loadbrake Winches are designed for use in either the
automatic (Weston) style brake that automatically suspends or holds the load, when the handle winding ceases.Available in 500kg and 1 tonne capacities, for heavy industrial pulling and hauling applications with a generous size, heavy duty drum for wire rope reeling.
OR
DER
CO
DE
Cap
acity
)
Dru
m H
ub D
ia.
(mm
)
Han
dle
Turn
s to
M
ove
1m
Han
dle
Leng
th
(mm
)
Effo
rt o
n H
andl
e Fo
r Rat
ed L
oad Drum Capacity
(max.)
Cable
201327 500kg 102 21.5 305 16 kg 8mm x 27.5m
201502 1 tonne 140 53 235 16 kg 13mm x 40m
NOTE: Wire Cable or Web Straps NOT included on Winches
Features • Compact, lightweight and rugged construction • Automatic brake - enabling the load to be held in any position • All enclosed mechanical components with strong steel cover for better protection • Safety ratchet gear to prevent slipping and electroplated gears for extra corrosion protection • BHW - 1800 and BHW - 2600 include double brake pawl for added safety • BHW - 125N (BHW - 1200N) available in chrome and noiselessApplications • Suitable for pulling or lifting loads across various industries
OR
DER
CO
DE
Lifti
ng C
apac
ity
(kg)
Pulli
ng C
apac
ity
(kg)
Hub
Dia
. (m
m)
Cap
acity
- W
ire
Rop
e (m
m x
m)
Gea
r Rat
io
Han
d Fo
rce
Req
. (k
g)
Mas
s (k
g)
Pa
rt N
o.
201325 180 370 40 4 x 36 4.1:1 14.5 3.0 BHW - 080
201303 270 545 50 5 x 23 4.1:1 15 3.3 BHW - 120
201372 270 545 50 5 x 23 4.1:1 15 3.3 BHW - 125N
201337 410 820 70 7 x 24 5.0:1 22 8.0 BHW - 1800
201331 600 1200 80 8 x 18 10.0:1 19 10.3 BHW - 2600
201600 850 1700 60 8 x 35 22.2:1 16 13.5 PHW - 155
WWW.BULLIVANTS.COM 201
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features
against the damaging effects of weather, environment and chemical corrosion • Finish has been tested and approved against salt - spray corrosion for at least 1,000 hours and can be used in severe circumstances • Model BHW125K is the noiseless brake winchApplications • Suitable for marine and outdoor exposed applications
OR
DER
CO
DE
Lifti
ng C
apac
ity
(kg)
Pulli
ng C
apac
ity
(kg)
Hub
Dia
. (m
m)
Cap
acity
- W
ire
Rop
e (m
m x
m)
Gea
r Rat
io
Han
d Fo
rce
Req
. (k
g)
Mas
s (k
g)
Pa
rt N
o.
201601 180 370 40 4 x 36 4.1:1 14.5 3.0 BHW080K
201602 270 545 50 5 x 23 4.1:1 15.0 3.3 BHW120K
201603 270 545 50 5 x 23 4.1:1 15.0 3.3 BHW125K*
201604 410 820 70 7 x 24 5.0:1 22.0 8.0 BHW180K
201605 600 1200 80 8 x 18 10.0:1 19.0 10.3 BHW260K
Features • Cost - effective solution which can be used to pull or lift loads • Corrosion resistant Grade 304 Stainless Steel • Compact and lightweight • Automatic brake - enabling the load to be held in any position • All enclosed mechanical components for better protection • Safety ratchet gear to prevent slippingApplications • Suitable for marine, food, pharmaceutical and veterinary industries
OR
DER
CO
DE
Lifti
ng C
apac
ity
(kg)
Pulli
ng C
apac
ity
(kg)
Hub
Dia
. mm
Cap
acity
- W
ire
Rop
e (m
m x
m)
Gea
r Rat
io
Han
d Fo
rce
Req
. (k
g)
Pa
rt N
o.
204069 270 545 50 5 x 23 4.1:1 15 BHW123
204070 410 820 70 7 x 24 5.0:1 22 BHW183
204071 600 1200 80 8 x 18 10.0:1 19 BHW263
1300 722 999202
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features
environment and chemical corrosion • Finish is tested and approved against salt spray corrosion for at least 1,000 hours • Suitable for severe circumstances • Suitable for marine and outdoor exposed applications
OR
DER
CO
DE
Lifti
ng C
apac
ity
(kg)
Pulli
ng C
apac
ity
(kg)
Hub
Dia
. (m
m)
Cab
le D
iam
eter
(m
m)
Gea
r Rat
io
Han
d Fo
rce
Req
. (k
g)
Mas
s (k
g)
No.
201606 - 280 19 4.0 3.1:1 2.26 2.26 PHW060K
201607 - 550 34 4.8 4.1:1 2.84 2.84 PHW120K
Features • Compact, lightweight and rugged construction • Mechanical components enclosed for protection and safety
• Heat - treated gears • Strong removable handles • High precision construction Minimises gear noise“HW1500 is a worm drive version”
OR
DER
CO
DE
Lifti
ng C
apac
ity
(kg)
Pulli
ng C
apac
ity
(kg)
Hub
Dia
. (m
m)
Cab
le D
iam
eter
(m
m)
Gea
r Rat
io
Han
d Fo
rce
Req
. (k
g)
Mas
s (k
g)
No.
201373 340 680 48 5.6 41.0:1 5.00 5.0 PHW150
WWW.BULLIVANTS.COM 203
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Lever Winches
• Compact, lightweight and easy to handle. • Recommended for applications where portability is an important criteria. • Tirfor units combine ease of handling and safety. • Units supplied without Wire Rope.
OR
DER
CO
DE
Cap
acity
(kg)
Wei
ght
Mac
hine
(kg)
Wei
ght W
ire
Rop
e (k
g)
Rop
e D
ia.
(mm
)
Dim
ensi
ons
(mm
)
Mod
el
201361 800 6.6 7 8.3 420 x 250 x 99 T-508D
201305 1600 13.5 12.5 11.5 530 x 315 x 127 T-516D
201306 3200 24 26 16.3 631 x 351 x 148 T-532D
OR
DER
CO
DE
Cap
acity
(kg)
Wei
ght
Mac
hine
(kg)
Wei
ght W
ire
Rop
e (k
g)
Rop
e D
ia.
(mm
)
Dim
ensi
ons
(mm
)
Mod
el
201362 800 6.6 7 8.3 420 x 250 x 99 T-508
201363 1600 13.5 12.5 11.5 530 x 315 x 127 T-516
201365 3200 24 26 16.3 631 x 351 x 148 T-532
Unit of Measure - EachTo suit Tirfor 500 Series.
OR
DER
CO
DE
Rop
e D
iam
eter
(m
m)
Rop
e Le
ngth
(m
etre
)
122110 8 20
201369 11 20
201370 16 20
The Bullant Winch may be used in any position to lift, pull, lower or stretch heavy loads. Able to be used at any angle, and unrestricted by rope length, this versatile winch enables the wire rope to be fed through 2 sets of wear resistant interlocking jaws by a single operating lever.
OR
DER
CO
DE
Lifti
ng
Cap
acity
(kg)
Pulli
ng
Cap
acity
(kg)
Rop
e D
ia.
(mm
)
Stro
ke (m
m)
Wei
ght (
kg)
Cas
e
Mod
el
203935 800 1200 8 696 8 Aluminium BUA-800
203936 800 1200 8 696 8 Steel BUS-800
203937 1600 2400 11 706 12 Aluminium BUA-1200
203938 1600 2400 11 706 12 Steel BUS1200
203939 3200 4800 16 711 24 Aluminium BUA-3200
203940 3200 4800 16 711 24 Steel BUS3200
1300 722 999204
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Spring BalancersPWB Anchor Spring BalancersThe PWB Anchor range of Endo Spring Balancers are designed for the suspension of electric or pneumatic power tools, or for hanging tools, parts or welding equipment at workstations or assembly lines. Available in varying adjustable weight ranges
Coupled with the lightweight range of the EK Series, the EW/ EWF range of Spring Balancers is the popular choice for positioning of tools.
OR
DER
CO
DE
Cap
acity
Min
. (k
g)
Cap
acity
Max
. (k
g)
Stro
ke (m
)
Wei
ght (
kg)
Mod
el
204127 0.3 0.6 1.5 0.4 ERP-06
204128 0.5 1.5 0.5 0.2 EK-00
204129 0.5 1.5 1.0 0.5 EK-0
203946 1.0 3.0 1.3 1.4 EW-3
203843 2.5 5.0 1.3 1.5 EW-5
203844 4.5 9.0 1.3 3.5 EWF-9
203334 9 15 1.3 3.8 EWF15
203335 15 22 1.5 7 EWF22
203336 22 30 1.5 7.6 EWF30
203846 30 40 1.5 9.8 EWF40
203847 40 50 1.5 10.2 EWF50
203849 50 60 1.5 11.6 EWF60
203850 60 70 1.5 11.9 EWF70
The Endo ELF Series is ideal for applications that require a longer stroke.
OR
DER
CO
DE
Bal
ance
Ran
ge
Min
. (kg
)
Bal
ance
Ran
ge
Max
. (kg
)
Stro
ke (m
etre
)
Wei
ght (
kg)
Mod
el
203947 1.5 3.0 2.5 4.1 ELF-3
203948 3.0 5.0 2.5 4.2 ELF-5
203332 5.0 9.0 2.5 4.7 ELF-9
203949 9.0 15.0 2.5 10.0 ELF-15
203845 15.0 22.0 2.5 10.2 ELF-22
203950 22.0 30.0 2.5 11.0 ELF-30
203951 30.0 40.0 2.5 14.0 ELF-40
203848 40.0 50.0 2.5 14.5 ELF-50
203952 50.0 60.0 2.5 17.0 ELF-60
203953 60.0 70.0 2.5 18.1 ELF-70
PWB Air Tool Balancers: Unit of Measure - Each
both hose reel and balancer.
OR
DER
CO
DE
Cap
acity
Min
. (k
g)
Cap
acity
Max
. (k
g)
Mod
el
Hos
e Tr
avel
(m
)
Wei
ght (
kg)
PWB
Par
t No.
204168 0.5 1.5 ATB-0 1.3 1.6 43351
204169 1.5 3.0 ATB-1 1.3 1.7 43352
WWW.BULLIVANTS.COM 205
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • Designed to support heavy hand - operated process tools enabling them to be operated with Minimal effort • Fully enclosed spring and solid casing • Stepless load balancing via worm gearing • Cable limiters prevent overload damage • Safety hook can be swivelled and adjusted laterally for alignment to work area • Larger capacities and stroke lengths available • CE Compliance
OR
DER
CO
DE
Cap
acity
(kg)
Stro
ke (m
)
Mas
s (k
g)
Mod
el
Part
No.
204110 0.5 - 1.5 1.6 0.5 7200 - 1 KRM001204111 0.5 - 2.0 2.5 0.8 7211 - 1 KRM111203330 0.5 - 2.0 2.5 0.9 7212 - 1 KRM121203238 1.5 - 3.0 2.5 0.8 7211 - 2 KRM112203239 2.0 - 5.0 3.0 3.3 7221 - 1 KRM211203240 7.0 - 10.0 3.0 3.7 7221 - 3 KRM213203241 10.0 - 14.0 3.0 3.9 7221 - 4 KRM214203242 10.0 - 14.0 3.0 4.0 7222 - 4 KRM224203243 9.0 - 14.0 2.0 3.6 7231 - 4 KRM314203851 9.0 - 14.0 2.0 3.4 7230 - 4 KRM304203244 13.0 - 17.0 2.0 3.6 7230 - 5 KRM305203690 16.0 - 21.0 2.0 3.8 7230 - 6 KRM306204112 13.0 - 17.0 2.0 3.8 7231 - 5 KRM315204113 16.0 - 21.0 2.0 4.0 7231 - 6 KRM316
Load IndicatorsTractel®
OR
DER
CO
DE
WLL
(ton
nes)
Prec
isio
n +/
- (k
g)
Incr
emen
t (k
g)
Wei
ght (
kg)
Mod
el
204242 0.5 1.0 0.2 1.1 LLX1
204243 1.0 2.0 0.5 1.1 LLX1
204244 2.0 4.0 1.0 1.3 LLX1
204245 3.2 6.0 1.0 1.5 LLX1
204246 5.0 10.0 2.0 2.3 LLX1
204247 6.3 13.0 2.0 2.3 LLX1
204248 12.5 25.0 5.0 4.3 LLX1
204249 20.0 40.0 10.0 7.0 LLX1
Tractel®
OR
DER
CO
DE
WLL
(ton
nes)
Prec
isio
n +/
- (k
g)
Min
. Dis
play
(k
g)
Incr
emen
t (k
g)
Max
. Dis
play
(k
g)
Wei
ght (
kg)
Mod
el
203969 0.5 0.5 0.5 0.1 550 2.30 LLX2
203970 1.0 1.0 1.0 0.2 1100 2.30 LLX2
203971 2.0 2.0 2.5 0.5 2200 2.30 LLX2
203972 3.2 3.2 2.5 0.5 3520 2.30 LLX2
203973 5.0 5.0 5.0 1.0 5500 3.35 LLX2
203974 6.3 6.3 5.0 1.0 6930 3.35 LLX2
204241 10.0 10.0 10.0 2.0 11000 6.45 LLX2
1300 722 999206
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Tractel®O
RD
ER C
OD
E
WLL
(ton
nes)
Prec
isio
n +/
- (k
g)
Min
. Dis
play
(k
g)
Incr
emen
t (k
g)
Max
. Dis
play
(k
g)
Wei
ght (
kg)
Mod
el
204238 15 30 25 5 16500 4 LLXh
204239 25 50 50 10 27500 6.6 LLXh
204059 50 100 100 20 55000 15.1 LLXh
204060 100 200 250 50 110 46 LLXh
204240 250 500 500 100 275 215 LLXh
Tractel®
OR
DER
CO
DE
WLL
(ton
nes)
Prec
isio
n +/
- (k
g)
Min
. Dis
play
(k
g)
Incr
emen
t (k
g)
Max
. Dis
play
(k
g)
Wei
ght (
kg)
Mod
el204250 0.25 2 0.5 0.5 275 1.1 LLZ
204251 0.5 4 1 1 550 1.1 LLZ
204252 1 8 2 2 1100 1.1 LLZ
203719 2 15 5 5 2200 1.3 LLZ
204253 3.2 25 5 5 3520 1.6 LLZ
204254 6.4 50 10 10 7040 2.3 LLZ
204255 10 80 20 20 11000 4 LLZ
204256 20 150 50 50 22000 7 LLZ
Load Skates
Features
installation of heavy equipment, machinery and bridge structures • Hardened rollers for low friction and roll resistance
• Turntables are supplied complete with handle to suit Load Skates LSK005, LSK010, LSK020 & LSK030
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Wid
th (m
m)
Leng
th (m
m)
Hei
ght (
mm
)
Mas
s (k
g)
Part
No.
204117 1.25 100 169 65 3.9 LSK005
204118 2.5 100 188 65 4.5 LSK010
203740 5 100 210 65 5 LSK020
204119 7.5 65 210 65 5 LSK030
204120 12.5 140 275 100 18 LSK050
204121 18.75 145 290 100 18 LSK075
Turntables
WWW.BULLIVANTS.COM 207
08 -
MA
TE
RIA
LS H
AN
DLI
NG
TrolleysScissorlifts: Unit of Measure - Each
• Single scissor lift models for high reach. • Overload valve ensures load limit is not exceeded. • Hydraulic lift ensures loads lower slowly. • Foot operated.
OR
DER
CO
DE
Lifti
ng C
apac
ity (k
g)
Max
. Hei
ght o
f Pl
atfo
rms
(mm
)
Dim
ensi
ons
(mm
)
Wei
ght (
kg)
203886 150 220 - 720 700 x 420 x 36 46
203887 300 285 - 880 815 x 500 x 50 82
203889 500 285 - 880 815 x 500 x 50 87
Double Scissorlifts: Unit of Measure - Each
• Double scissor lift models for high reach. • Overload valve ensures load limit is not exceeded. • Hydraulic lift ensures loads lower slowly. • Foot operated.
OR
DER
CO
DE
Lifti
ng C
apac
ity (k
g)
Max
. Hei
ght o
f Pl
atfo
rms
(mm
)
Dim
ensi
ons
(mm
)
Wei
ght (
kg)
203888 350 1300 1000 x 515 x 420 115
203890 800 1300 940 x 500 x 340 120
Flat Trolleys: Unit of Measure - Each
Flat Trolleys are a quality product at a budge price, packed with features and easy to use. This makes them the answer
workplace injuries.
OR
DER
CO
DE
Cap
acity
(kg)
Tier
s
Plat
form
Siz
e (m
m)
Mat
eria
l
Han
dle
No.
of W
heel
s
Wei
ght (
kg)
203829 150 1 762 x 483 Enamelled Steel 1 4 12.5
203831 150 2 762 x 483 Enamelled Steel 2 4 20
203832 300 2 940 x 635 Enamelled Steel 2 4 34
203833 300 3 940 x 635 Enamelled Steel 2 4 45
1300 722 999208
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • Single and double scissor lift models for high reach available • Sealed bearing wheels for durability and cleanliness • Positive braking on rear wheels for safety • Overload valve ensures load limit is not exceeded • Special hydraulic valving allows the load to be lowered slowly • One piece table top for strength and easy cleaning
• CE ComplianceApplications • Raising heavy loads and a safe versatile way of transporting goods in warehouses, workshops, libraries, loading docks and hospitals
• CE Compliance
OR
DER
CO
DE
Load
Cap
acity
(kg)
Lift
Ran
ge (m
m)
Tabl
e Si
ze (m
m)
Mas
s (k
g)
Pa
rt N
o.
203814 150 250 - 755 450 x 700 38 PLT150
203271 300 312 - 900 500 x 800 75 PLT300
203817 350 375 - 1400 500 x 900 117 PLT350
204124 500 320 - 950 500 x 900 94 PLT500
203272 500 370 - 1130 500 x 700 101 PLT505
203816 800 365 - 1000 550 x 1000 115 PLT800
Pallet Trucks
hydraulics.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Lift
Hei
ght
(mm
)
203910 2.5 80-200
Narrow Pallet Truck: Unit of Measure - Each
• Lightweight - 45% lighter than conventional pallet truck.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Lift
Hei
ght
(mm
)
203911 1.5 75-190
Traverse Pallet Truck: Unit of Measure - Each
• 4 way steer. • Urethane wheels. • 1.5 tonne capacity.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Fork
Wid
th
(mm
)
Fork
Len
gth
(mm
)
Lift
Hei
ght
(mm
)
203878 1.5 685 1150 85-200
WWW.BULLIVANTS.COM 209
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Super Narrow Pallet Truck: Unit of Measure - Each
• Super narrow. • Urethane wheels. • 2.0 tonne capacity.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Fork
Wid
th
(mm
)
Fork
Len
gth
(mm
)
Lift
Hei
ght
(mm
)203879 2.0 320 1150 75-200
Quick Lift Pallet Truck: Unit of Measure - Each
• Double speed pump. • Urethane wheels. • 2.5 tonne capacity.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Fork
Wid
th
(mm
)
Fork
Len
gth
(mm
)
Lift
Hei
ght
(mm
)
203885 2.5 685 1150 85-200
• High lift. • Three stage mast. • Lateral stabilisers prevent movement when raised.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Fork
Wid
th
(mm
)
Fork
Len
gth
(mm
)
Lift
Hei
ght
(mm
)
203873 1.0 685 1150 75 - 800
203871 1.0 520 1150 75 - 800
• Battery electric. • High lift. • 3 stage mast. • Lateral stabilisers prevent movement when raised.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Fork
Wid
th
(mm
)
Fork
Len
gth
(mm
)
Lift
Hei
ght
(mm
)
Wei
ght (
kg)
203874 1.0 685 1245 75 - 800 181
203872 1.0 520 1245 75 - 800 180
Stainless Steel Pallet Trucks: Unit of Measure - Each
• Stainless Steel pallet truck. • Nylon wheels.
OR
DER
CO
DE
Cap
acity
(to
nnes
)
Fork
Wid
th
(mm
)
Fork
Len
gth
(mm
)
Lift
Hei
ght
(mm
)
203884 2.5 685 1150 82 - 200
203882 2.5 520 1150 82 - 200
1300 722 999210
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Features • Unloading skids in smaller workshops and warehouses • Economical alternative to expensive forklifts • High quality, heavy duty construction for reliability • Supplied with both work platform and fork tynes • CE Compliance • Both battery and manual versions available
OR
DER
CO
DE
Load
Cap
acity
(k
g)
Lift
Ran
ge
(mm
)
Tabl
e Si
ze
(mm
)
Ope
ratio
n
Part
No.
203821 400 90 - 1200 650 x 580 Manual PHK120
203822 400 90 - 1500 650 x 580 Manual PHK150
203823 400 90 - 1700 650 x 580 Manual PHK170
203824 400 90 - 1200 650 x 580 Battery PHK125
203825 400 90 - 1500 650 x 580 Battery PHK155
203826 400 90 - 1700 650 x 580 Battery PHK175
Features • A cost effective portable lifting aid which enables one person to safely lift and manoeuvre up to 100kg, from ground level up to 1000mm high • Unique reverse braking system allows the load to stop at any position without having to lock or unlock pin or ratchets • Noiseless winch for silent operation • Elected for Australian Design Award by WorkCover
OR
DER
CO
DE
Load
Cap
acity
(k
g)
Max
. Pla
tform
H
eigh
t (m
m)
Plat
e W
idth
(m
m)
Plat
e Le
ngth
(m
m)
Mas
s (k
g)
Part
No.
204122 100 1000 400 635 27 LPL100
Features • Economical alternative for a wide variety of lifting and moving applications
• Easy to use up and down switching • Industrial wheels for durability • Innovative safety inertia device
• 240V AC – 24V DC battery charger supplied as standard
OR
DER
CO
DE
Load
Cap
acity
(k
g)
Max
. Pla
tform
H
eigh
t (m
m)
Plat
e W
idth
(mm
)
Plat
e Le
ngth
M
ass
(kg)
Part
No.
204116 150 1540 520 460 58 PEL150
WWW.BULLIVANTS.COM 211
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Fabricated Lifting Product - Forklift ApplicationsOur Forklift attachments come in many different shapes, sizes and capacities. All of the Forklift Attachments in our standard range add versatility and safety to your Forklift, making it a useful addition to the workplace. All of the attachments within our range are manufactured to our high standards to ensure compliance to all workplace rules and regulations as required under Australian Standards.
telescopic and extendable fork mounted jibs which can add extra reach when needed and be compacted/retracted when not, saving storage space.Forklift AttachmentsForklift attachments turn your standard forklift into a more versatile, productive and safe materials handling tool. Bullivants’ range of forklift attachments are
Our Forklift Attachments are: • Robustly designed
• Proof Tested
• Manufactured from Australian steel • Powder Coated • Simple to use • Easily adjusted (relevant models)With many features such as: • Adjustable spans • Swivel Hook lift points • Inclined Jib • Fitted with either safety chains or captive safety pins
WARNING! • Before use a competent person shall check all lifting and structural components of the Forklift Attachment • Before use a competent person shall check all lifting equipment to be used with the Attachment • Always check the condition of the item or load to be lifted before lifting it • Always work within the capacity of the Forklift and attachment being used. Ensure that the attachment is not rated with a higher capacity than that of the Forklift. • Always be aware of the extra length that the attachment may add to the Forklift • When using jib style attachments be cautious of the load swinging and
• The Forklift being used shall be correctly maintained and inspected.2 tonne Extendable Forklift Boom: Unit of Measure - Each • Forklift requires 2 tonne at 1.3 metre centres for full boom capacity.
OR
DER
CO
DE
Max
i. W
LL
(tonn
es)
Clo
sed
(mm
)
1st E
xten
sion
Po
int (
mm
)
2nd
Exte
nsio
n Po
int (
mm
)
Fully
Ope
n (m
m)
A (m
m)
Uni
t Wei
ght
(kg)
S1539030 2Position
Length (mm) 1300 1525 1750 1975720 46
WLL (tonnes) 2.0 1.65 1.3 0.95
Note: WLL will decrease depending on the position of the arms, see above
5 tonne Extendable Forklift Boom: Unit of Measure - Each
OR
DER
CO
DE
Max
i. W
LL
(tonn
es)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
Uni
t Wei
ght
(kg)
S1539082 5Position
Length (mm) 450 1150 1420 1780 2140120
WLL (tonnes) 5 3.5 2.5 1.75 1.25
Note: WLL will decrease depending on the position of the arms, see above
1300 722 999212
08 -
MA
TE
RIA
LS H
AN
DLI
NG
OR
DER
CO
DE
Max
i. W
LL
(tonn
es)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
Uni
t Wei
ght
(kg)
S1539080 4.5Position
Length (mm) 481 1180 1440 1800 2160120
WLL (tonnes) 4.5 3.5 2.5 1.75 1.25
Note: WLL will decrease depending on the position of the arms, see above
OR
DER
CO
DE
WLL
(kg)
Dru
m S
ize
(L)
Uni
t Wei
ght
(kg)
S1539100 700 200 70
Drum Tipper: Unit of Measure - Each
OR
DER
CO
DE
WLL
(kg)
Dru
m S
ize
(L)
Uni
t Wei
ght
(kg)
S1539095 500 200 69
Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Uni
t Wei
ght
(kg)
S1539040 2 20
Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Uni
t Wei
ght
(kg)
S1539050 3 22
2.5 tonne Forklift Tines Extension Slippers: Unit of Measure - Pair
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
Leng
th (m
etre
)
Max
imum
Tin
e W
idth
(mm
)
Uni
t Wei
ght (
kg)
S1539110 2.5 1.9 130 57
Unit of Measure - Pair
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
Leng
th (m
etre
)
Max
imum
Tin
e W
idth
(mm
)
Uni
t Wei
ght (
kg)
S1539112 4 2 160 82
WWW.BULLIVANTS.COM 213
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Uni
t Wei
ght
(kg)
S1537160 1 164
Forklift Work Platform: Unit of Measure - Each
OR
DER
CO
DE
WLL
(kg)
Uni
t Wei
ght
(kg)
201129 250 90
Fabricated Lifting Product - Crane & Overhead Lifting ApplicationsBullivants prides itself on setting the highest standards for quality and safety with all of our Crane and Overhead Lifting Devices.By offering engineering, manufacturing and reverse-engineering to industry we are able to support our customers with all of their lifting applications. Our Crane and Overhead Lifting Products are designed and manufactured in accordance with all relevant Australian Standards and are guaranteed to meet all criteria necessary to give our customers peace of mind. Our experienced team can custom design, re-certify, manufacture and repair virtually any type of lifting device used in industrial applications. Whilst our standard range offers versatility across a variety of applications, we understand that you may have a very
needs.
We can supply fully tested chain slings and hardware with your fabricated lifting product as a complete unit so that everything is ready to go when it gets to site.Be sure to ask our trained staff about this option when you request your quote.
Spreader Beams5 tonne Extendable Spreader Beam: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Load
Hol
e C
TC
Dis
tanc
e (m
m)
S1523034
5.2 2100
5.2 2600
5.0 3100
5.0 3600
5 tonne Extendable Spreader Beam: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Load
Hol
e C
TC
Dis
tanc
e (m
m)
S1523035
5 1200
5 1450
5 1700
5 1950
1300 722 999214
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Lifting Beams
• 90° maximum sling angle • Heavy duty.
• Engraved ID tag • Powder coated safety yellow.
OR
DER
CO
DE
WLL
(ton
nes)
Leng
th (m
)
Uni
t Wei
ght
(kg)
S1502361 35 2.6 152
• Heavy duty.
• Powder coated safety yellow.
OR
DER
CO
DE
WLL
(ton
nes)
Leng
th (m
)
Uni
t Wei
ght
(kg)
S1504037 1 1.14 2.7
S1504038 1 1.24 2.9
S1504039 1 1.44 10.5
S1504040 1 1.54 3.5
S1504041 1 1.64 17.6
S1504042 1 1.84 19.6
S1504043 1 2.04 6.2
WWW.BULLIVANTS.COM 215
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Extendable Combination Lifting & Spreader BeamsBullivants’ combination beams are the perfect addition to your rigging arsenal.
room issues (at lower WLL’s).Our Combination Beams are: • Versatile
• Tested
• Adjustable • Manufactured from Australian steel • Powder CoatedAnd Come Complete With:
• Captive locking pins • Ground stands allowing access to the underside of the beam when not in use
WARNING! • Before use a competent person shall check the condition of the Beam • Before use a competent person shall check all lifting equipment to be used with the Beam • Never extend the Beam past its maximum allowable span • Always remember; The tare weight of the Beam will increase the load on the crane or hoist being used • Do not attempt to replace or repair any components of the Beam. Any repairs shall be conducted by Bullivants’ • Before lifting the load ensure that the adjustment of the Beam is even and that the locking pins are securely in place • Never Modify the Beam to increase its adjustment range or capacity • Never attempt to adjust the beam in any way whilst under load. If the load is uneven in any way it must be lowered, assessed and then adjusted accordingly • Always ensure that the sling angles are correct before taking the load • Always know the weight of the load and be sure that all lifting equipment has an adequate WLL for the lift!8.6 tonne Combination Beam: Unit of Measure - Each
OR
DER
CO
DE
Ope
n Le
ngth
(mm
)
WLL
as
Lifti
ng
Bea
m (t
onne
s)
WLL
as
Spre
ader
B
eam
(ton
nes)
S1504081
3600 0.8 6.6
3100 0.9 6.9
2600 1.1 7.3
2100 1.3 8.6
15 tonne Combination Beam: Unit of Measure - Each
OR
DER
CO
DE
Lug
Cen
ters
(mm
)
WLL
as
Lifti
ng
Bea
m (t
onne
s)
WLL
as
Spre
ader
B
eam
(ton
nes)
S1504151
2650 3.1 15
3050 2.7 14
3450 2.4 13
3850 2 13
1300 722 999216
08 -
MA
TE
RIA
LS H
AN
DLI
NG
OR
DER
CO
DE
Lug
Cen
ters
(mm
)
WLL
as
Lifti
ng
Bea
m (t
onne
s)
WLL
as
Spre
ader
B
eam
(ton
nes)
S15040690
2290 3.1 15.0
2690 2.7 15.0
3090 2.4 15.0
3490 2.0 15.0
OR
DER
CO
DE
Lug
Cen
ters
(mm
)
WLL
as
Lifti
ng
Bea
m (t
onne
s)
WLL
as
Spre
ader
B
eam
(ton
nes)
S1504311
4000 6.0 30
4500 5.25 30
5000 4.5 30
5500 4.25 30
6000 4.0 30
OR
DER
CO
DE
Lug
Cen
ters
(mm
)
WLL
as
Lifti
ng
Bea
m (t
onne
s)
WLL
as
Spre
ader
B
eam
(ton
nes)
S1504350
4000 6.5 50
4500 6.0 50
5000 5.4 50
5500 4.9 50
6000 4.5 50
Pipe End CapsOur End Cap range is the perfect versatile and affordable solution to your large lift needs. Offering high Working Load Limits (from 50t up to 220t), at greater spans than standard beams (up to 15mtrs). The Pipe End Caps simply slip over
Our Pipe End Caps are: • Versatile • Heavy Duty
• Tested
• Adjustable • Manufactured from Australian steel • GalvanisedAnd Come Complete With: • Transport Lugs • Pipe Sections (optional - ask your nearest Bullivants Branch for details)
WARNING! • Before use a competent person shall check the condition of the Caps • Before use a competent person shall check all lifting equipment to be used with the Caps (this includes the pipe) • Always remember; The tare weight of the Beam will increase the load on the crane or hoist being used • Do not attempt to alter or repair the End Caps. Any repairs shall be conducted by Bullivants’ • Before lifting the load ensure that the load is even and that the Pipe End Caps are securely in place • Always ensure that the sling angles are correct before taking the load • Always take the weight of the load slowly. Shock-loading the end caps could cause them to slip off the pipe • Always know the weight of the load and be sure that all lifting equipment has an adequate WLL for the lift!
WWW.BULLIVANTS.COM 217
08 -
MA
TE
RIA
LS H
AN
DLI
NG
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
Leng
th (m
)
Uni
t Wei
ght
(kg)
S1504359 50 max 12 341
ORDER CODE Description
S1504359 50t x 12m Maximum assembly effective length spreader with end caps
160599 SHACKLE: 35t GR‘S’ Safety Bow Shackle (Green Pin Vanbeest Safety Bow shackles only)
*PIPE: 273.1 x 9.5 AS1163 GR350 *Bullivants accepts no responsibility should the grade and size of pipe used differ from that which we have stated above.
Assembly Effective Length
Sling Apex Angle
90° 75° 60° 45°
3 (metre) 40t 45t 50t 55t4 (metre) 40t 45t 50t 55t5 (metre) 40t 45t 50t 55t6 (metre) 40t 45t 50t 55t7 (metre) 40t 45t 50t 55t8 (metre) 40t 45t 50t 55t9 (metre) 40t 45t 50t 55t10 (metre) 40t 45t 50t 55t11 (metre) 40t 45t 50t 55t12 (metre) 40t 45t 50t 55t
End Cap Dimensions50t End Caps add an additional 650mm total to lengths detailed (325mm each).e.g. Using a 3mtr piece of pipe on 50t end caps will give a centre line of lug dimension 3650mm. 12mtr effective length = 11350mm length of pipe.These end cap dimensions must be considered when calculating length of pipe to be used and you must always do a review of your lift and have your pipe cut and rigging selected to suit your individual application.
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
Leng
th (m
)
Uni
t Wei
ght
(kg)
S1504360 100 max 12 638
ORDER CODE Description
S1504360 100t x 12m Maximum assembly effective length spreader with end caps
160622 SHACKLE: 85t GR‘S’ Safety Bow Shackle (Green Pin Vanbeest Safety Bow shackles only)
*PIPE: 323.9 x 9.5 AS1163 GR350 *Bullivants accepts no responsibility should the grade and size of pipe used differ from that which we have stated above.
Assembly Effective Length
Sling Apex Angle
90° 75° 60° 45°
3 (metre) 100t 115t 110t 125t4 (metre) 100t 115t 110t 125t5 (metre) 100t 115t 110t 125t6 (metre) 100t 115t 110t 125t7 (metre) 100t 115t 110t 125t8 (metre) 100t 115t 110t 125t9 (metre) 100t 115t 110t 125t
10 (metre) 90t 115t 110t 125t11 (metre) 80t 100t 110t 125t12 (metre) 65t 85t 100t 125t
End Cap Dimensions100t End Caps Add an additional 840mm total to lengths detailed (420mm each).e.g. Using a 3mtr piece of pipe on 100t end caps will give a centre line of lug dimension 3840mm. 12mtr effective length = 11160mm length of pipe.These end cap dimensions must be considered when calculating length of pipe to be used and you must always do a review of your lift and have your pipe cut and rigging selected to suit your individual application.
1300 722 999218
08 -
MA
TE
RIA
LS H
AN
DLI
NG
• Supplied in pairsO
RD
ER C
OD
E
WLL
(ton
nes)
Leng
th (m
)
Uni
t Wei
ght
(kg)
S1504361 220 max 15 938
ORDER CODE Description
S1404361 220t x 18m Maximum assembly effective length spreader with end caps
160624 SHACKLE: 150t GR‘S’ Safety Bow Shackle (Green Pin Vanbeest Safety Bow shackles only)
*PIPE: 406.4 x 12.7 AS1163 GR350 *Bullivants accepts no responsibility should the grade and size of pipe used differ from that which we have stated above.
Assembly Effective Length
Sling Apex Angle
90° 75° 60° 45°
3 (metre) 205t 230t 250t 260t
4 (metre) 205t 230t 250t 260t
5 (metre) 205t 230t 250t 260t
6 (metre) 205t 230t 250t 260t
7 (metre) 205t 230t 250t 260t
8 (metre) 205t 230t 250t 260t
9 (metre) 205t 230t 250t 260t
10 (metre) 205t 230t 250t 260t
11 (metre) 205t 230t 250t 260t
12 (metre) 205t 230t 250t 260t
13 (metre) 180t 230t 250t 260t
14 (metre) 160t 200t 250t 260t
15 (metre) 135t 170t 220t 260t
End Cap Dimensions220t End Caps Add an additional 980mm total to lengths detailed (490mm each).e.g. Using a 3mtr piece of pipe on 220t end caps will give a centre line of lug dimension 3980mm. 15mtr effective length = 14020mm length of pipe.These end cap dimensions must be considered when calculating length of pipe to be used and you must always do a review of your lift and have your pipe cut and rigging selected to suit your individual application.
WWW.BULLIVANTS.COM 219
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Pallet LiftingOur range of pallet lifting products are designed to safely move pallets when Forklift access is unavailable. Both the Pallet Lifting Fork and Pallet Lifting Bars have been designed with the
• A safe “no fuss” solution to moving pallets without the use of a forklift
• Proof Tested • Clearly marked • Manufactured from Australian steel • Powder CoatedAnd Come Complete With: • Multi lift points for load balancing (Pallet Lifting Fork only) • Square lifting frame (option only for Pallet Lifting Bars)
WARNING! • Before use a competent person shall check all lifting and structural components of the Pallet Lifting Device • Before use a competent person shall check all lifting equipment to be used with the Pallet Lifting Device • Do lift uneven or unsteady loads • Where possible the load should be wrapped before being lifted • Always ensure that all movable components are in the correct position and secure before lifting the load • Always travel loads at the lowest possible height to reduce the risk of falling objects harming personnel • Always work within the capacity of the crane or hoist being used • Always maintain appropriate exclusion zones at all times • When moving loads with a crane care must be taken not to create a swinging load • Always use good lifting and rigging practice when using these items
OR
DER
CO
DE
WLL
(ton
nes)
Uni
t Wei
ght
(kg)
S1538011 2 116
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
Uni
t Wei
ght
(kg)
201127 2 18
OR
DER
CO
DE
WLL
(ton
nes)
Uni
t Wei
ght
(kg)
S1505003 2 20
OR
DER
CO
DE
WLL
(kg)
Dru
m S
ize
(L)
Uni
t Wei
ght
(kg)
S1531020 700 200 53
OR
DER
CO
DE
WLL
(ton
nes)
Dru
m S
ize
(L)
Uni
t Wei
ght
(kg)
S1531022 1 200 102
1300 722 999220
08 -
MA
TE
RIA
LS H
AN
DLI
NG
OR
DER
CO
DE
WLL
(ton
nes)
Effe
ctiv
e W
idth
(m
m)
Uni
t Wei
ght
(kg)
S1505010 1 1000 30
OR
DER
CO
DE
WLL
(ton
nes)
Effe
ctiv
e W
idth
(C
lose
d) (m
m)
Effe
ctiv
e W
idth
(F
ully
Ope
n) (m
m)
Uni
t Wei
ght (
kg)
S1505005 2 800 1100 40
• Galvanised bow shackle.
OR
DER
CO
DE
WLL
(ton
nes)
Ope
ning
(mm
)
Uni
t Wei
ght
(kg)
S1530201 1.5 80 7.5
Work CagesBullivants’ Work Cages are designed to go above and beyond the requirements of AS1418.17 (Design and construction of Workboxes) offering you peace of mind when it comes to transporting personnel by means of crane. All of our Work Cages go through stringent design and testing procedures to ensure safety is maintained at all times.
• A safe and secure method for working at heights
• Proof Tested
• Manufactured from Australian steel • Powder CoatedAnd Come Complete With: • 4 lifting points for optimum stability • Internal Handrails • Overhead Harness anchor points (on models with overhead protection) • Forklift slippers for transportation of empty work cage around the job site
WARNING! • Before use a competent person shall check all lifting and structural components of the work cage • Before use a competent person shall check all lifting equipment and attachment points • Never enter or exit a suspended work cage except in the event of an emergency • Always work within the capacity of the crane being used. Ensure that you are working within the cranes SWL at the required radius • Never use work cages near live plant or equipment. Maintain appropriate exclusion zones at all times • All personnel within the Work Cage must be attached to the anchorage point via approved fall arrest equipment • The crane being used shall be correctly maintained and inspected as per AS2550.1 • Work Cages shall only be used when no other means of transportation is possible. Never use a work cage as a substitute for normal means of transportation • Contact between the crane operator and the personnel in the cage must be maintained at all times and the operator shall stay at the crane controls at all times
OR
DER
CO
DE
WLL
(kg)
Uni
t Wei
ght
(kg)
S1537051 150 160
WWW.BULLIVANTS.COM 221
08 -
MA
TE
RIA
LS H
AN
DLI
NG
OR
DER
CO
DE
WLL
(kg)
Hei
ght (
mm
)
Wid
th (m
m)
Leng
th (m
m)
Uni
t Wei
ght
(kg)
300 2200 950 1500 206
300 2200 950 1500 180
OR
DER
CO
DE
WLL
(kg)
Hei
ght (
mm
)
Exte
rnal
D
iam
eter
(m
m)
Inte
rnal
D
iam
eter
(m
m)
Uni
t Wei
ght
(kg)
S1537111 250 2400 1000 700 246
Lifting Hooks
Unit of Measure - Each
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
(p
air)
Type
Uni
t Wei
ght
(kg)
(pai
r)
S1543010-1 22 Angled 5
S1543010-2 22 Straight 5
OR
DER
CO
DE
WLL
(ton
nes)
Max
imum
Coi
l W
idth
(mm
)
Uni
t Wei
ght
(kg)
S1543216 5 1220 130
S1543220 6 940 130
• Supplied in pairs
OR
DER
CO
DE
WLL
(ton
nes)
(p
air)
Fits
Pip
e Si
ze
(mm
)
Uni
t Wei
ght
(kg)
(pai
r)
S1543151 1.5 0-20 3
S1543212 3 0-32 7.6
S1543218 5 15-50 10.4
Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Cla
mp
Ran
ge
(mm
)
Uni
t Wei
ght
(kg)
S1534021 1.5 3-20 6.6
S1534030 2.5 3-28 12.5
S1534040 4 32-60 18
1300 722 999222
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Pair
OR
DER
CO
DE
WLL
(ton
nes)
(p
air)
Cla
mp
Ran
ge
(mm
)
Uni
t Wei
ght
(kg)
(pai
r)
S153386 3 0-60 10
OR
DER
CO
DE
WLL
(ton
nes)
(p
air)
Cla
mp
Ran
ge
(mm
)
Uni
t Wei
ght
(kg)
(pai
r)
S153387 6 0-60 17.5
Fabricated Lifting Product - Oxy/Acetylene HandlingHandling gas bottles can be a very hazardous task if done incorrectly. That’s why Bullivants have ensured that their range of trolleys and lifting frames are of the highest quality and provide the safest means of transporting these dangerous items.
• Safe and easy to use • Versatile
• Proof Tested • Clearly marked with a welded on I.D. tag • Manufactured from Australian steel • Powder Coated And Come Complete With: • Heavy Duty Toolbox (Trolley only)
• Supplied with pneumatic tyres (Trolley only. Other wheel options available) • Captive locking pin (Trolley only) • Fitted with safety chains (Lifting Frame only) • Lifting Frame and Trolleys both come with single lifting point
We can supply fully tested chain slings and hardware with your fabricated lifting product as a complete unit so that everything is ready to go when it gets to site.Be sure to ask our trained staff about this option when you request your quote.
WARNING! • Before use a competent person shall check all lifting and structural components of the Trolley/Lifting Frame • Before use a competent person shall check all lifting equipment to be used with the Trolley/lifting frame • Always ensure that the bottles being moved are secured correctly with safety pins or safety chains in place • Always use good lifting and rigging practice when using these items
Unit of Measure - Each
• Fits two Oxygen bottles • Supplied with pneumatic tyres.
OR
DER
CO
DE
WLL
(kg)
Uni
t Wei
ght
(kg)
Whe
el T
ype
S1537126 200 76 Pneumatic Tyres
WWW.BULLIVANTS.COM 223
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Unit of Measure - Each
• Fits one Oxygen bottle with either one of the following bottles: Acetylene, Propane or LPG • Supplied with pneumatic tyres.
OR
DER
CO
DE
WLL
(kg)
Uni
t Wei
ght
(kg)
Whe
el T
ype
S1537121B 100 60 Pneumatic Tyres
Unit of Measure - Each
• Fits one Oxygen bottle with either one of the following bottles: Acetylene, Propane or LPG • Supplied with pneumatic tyres.
OR
DER
CO
DE
WLL
(kg)
Uni
t Wei
ght
(kg)
Whe
el T
ype
S1537122A 150 60 Pneumatic Tyres
Unit of Measure - Each
• Fits one Oxygen bottle with either one of the following bottles: Acetylene, Propane or LPG • Supplied with pneumatic tyres or solid wheels.
OR
DER
CO
DE
WLL
(kg)
Uni
t Wei
ght
(kg)
Whe
el T
ype
S1537122 200 76 Pneumatic Tyres
S1537124 200 76 Solid Wheels
• Fits one Oxygen bottle with either one of the following bottles: Acetylene, Propane or LPG
• Fits two Oxygen bottles with a combination of either two Acetylene, Propane or LPG bottles • Use as a lifting frame or with a forklift.
OR
DER
CO
DE
WLL
(kg)
Hei
ght A
(mm
)
Wid
th B
(mm
)
Leng
th C
(m
m)
Uni
t Wei
ght
(kg)
S1537121 200 1890 400 645 35
S1537121A 400 1860 623 730 61
1300 722 999224
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Fabricated Lifting Product - Goods CagesBullivants’ range of Goods Cages have been designed to offer a wide range of options including various capacities and
storage of loose loads and can be lifted by forklift or by sling.
• A safe and secure method for transporting and storing loose loads
• Tested
• Manufactured from Australian steel • Powder CoatedAnd Come Complete With: • 4 lifting points for optimum stability • Drop sides or swinging gates (some models) • Forklift Pockets (except on the Pallet Lifting Cage)
We can supply fully tested chain slings and hardware with your fabricated lifting product as a complete unit so that everything is ready to go when it gets to site.Be sure to ask our trained staff about this option when you request your quote.
WARNING! • Before use a competent person shall check all lifting and structural components of the goods cage • Before use a competent person shall check all lifting equipment to be used with the goods cage • Always know the weight of the load to be lifted • Ensure that the load is even before lifting the cage • Always ensure that the drop side or swinging gate are closed securely before lifting the cage • Ensure that the contents of the cage cannot fall out. Wrapping the contents of the cage may be necessary to ensure the security of the load
OR
DER
CO
DE
WLL
(ton
nes)
Des
crip
tion
Hei
ght (
mm
)
Wid
th (m
m)
Leng
th (m
m)
Uni
t Wei
ght
(kg)
S1537005-2 0.5 Without Drop Side 500 500 500 45
S1537005-4 0.75 Without Drop Side 750 760 760 73
S1537007-4 0.75 With Drop Side 750 762 762 73
S1537005-6 1 Without Drop Side 1000 1012 1012 126
S1537007-6 1 With Drop Side 1000 1000 1000 135
OR
DER
CO
DE
WLL
(ton
nes)
Hei
ght (
mm
)
Wid
th (m
m)
Leng
th (m
m)
Uni
t Wei
ght
(kg)
S1537009 1 1250 1370 1370 160
WWW.BULLIVANTS.COM 225
08 -
MA
TE
RIA
LS H
AN
DLI
NG
Frequently Asked Questions
A -
A - Peace of Mind.
1. Australian made - This means that the materials used to fabricate Bullivants’ standard Engineered Product range are of high quality and manufactured locally, supporting Australian jobs. 2. specialists at each of our 24 branches, located across Australia, dedicated to providing the upmost level of customer service. 3. in our branch locations and also centrally with our manufacturers ready to ship. 4. Compliant to Australian Standards - Not only is Bullivants’ Engineered Product range made in accordance with stringent Australian Standards but your local branch can have the item added to your register before it
by utilising the Bullivants BEAM system (Bullivants Electronic Asset Management). Ask your local branch for details on the BEAM system.
A -
how can Bullivants help me?