07-anpl025_forgedsteel_uanrevmay272009
TRANSCRIPT
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
1/8
Price Sheet UAN-1.09 | Effective:January 26, 2009 |Cancels Price Sheet UAN-8.08 of August 4, 2008Universal Forged steel anvilets
EastErN rEgioN
800-301-2701NorthErN rEgioN
800-301-2701southErN rEgioN
800-451-4414wEstErN rEgioN
800-572-0051
www.anvilintl.com
FREIGHT ALLOWANCE:
All ries are F.O.B. oint of shiment. On shiments weighing 2,500 ounds
or more, rail freight or motor freight at the lowest ublished rate, is allowedto all ontinental U.S. rail oints or all U.S. highway oints listed in ublishedtariffs (Alaska and Hawaii exluded). In no ase will more than atual freight beallowed.
NOTE:
All orders are aeted on the basis of ries in effet at the time of shiment.
NOTICE:
To the ries and terms quoted, there will be added any manufaturers or salestax ayable on the transation under any effetive statute.
GENERAL
Upc numbers and SpIN ommodity identifiation numbers are
available uon request. To obtain urrent ISO ertifiations, listings, and other arovals, visit AnvilsWeb site at www.anvilintl.om.
priing is subjet to hange without notie. Go to Anvils Web site for the mosturrent list rie information, or ontat your loal Anvil reresentative.
LOSS OR DAMAGE CLAIMS:
All goods are shied at buyers risk. Shiments should be arefully examineduon delivery and before the arriers delivery reeit is signed. If any loss ordamage is evident, the buyer should make an aroriate notation on thedelivery reeit and insist that the arriers driver initial suh exetion. Theontents of all akages should be arefully examined for onealed damage assoon as ossible after delivery, so that the arrier an be requested, within 48hours after delivery, to arrange for romt insetion of the damaged goods.
REVISIONSMay 27, 2009page 6: Elbow AnviletsSize Corrections - 6 - 3/4 x 1/2
6 - x 3/4
page 6: Flat AnviletsAdded - 000# Socket Weld
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
2/8
www.anvilintl.comevised:
Forged steel anvilets Price Listec d: Juy 26, 2009 | rpc P d: augu 2008 | sh # Uan-1.09 | M spcfc - astM a-10
1. CONTROLLING PROVISIONS:
These terms and onditions shall ontrol with reset to any urhaseorder or sale of Sellers roduts. No waiver, alteration or modifiationof these terms and onditions whether on Buyers urhase order orotherwise shall be valid unless the waiver, alteration or modifiationis seifially aeted in writing and signed by an authorizedreresentative of Seller.
2. DELIVERY:
Seller will make every effort to omlete delivery of roduts as indiatedon Sellers aetane of an order, but Seller assumes no resonsibilityor liability, and will aet no bakharge, for loss or damage due todelay or inability to deliver aused by ats of God, war, labor diffiulties,aident, delays of arriers, by ontrators or suliers, inability to obtainmaterials, shortages of fuel and energy, or any other auses of any kindwhatever beyond the ontrol of Seller. Seller may terminate any ontratof sale of its roduts without liability of any nature, by written notie toBuyer, in the event that the delay in delivery or erformane resultingfrom any of the aforesaid auses shall ontinue for a eriod of sixty (60)days. Under no irumstanes shall Seller be liable for any seial oronsequential damages or for loss, damage, or exense (whether or notbased on negligene) diretly or indiretly arising from delays or failureto give notie of delay.
3. WARRANTY:
Seller warrants for one year from the date of shiment Sellersmanufatured roduts to the extent that Seller will relae thosehaving defets in material or workmanshi when used for the uroseand in the manner whih Seller reommends. If Seller examinationshall dislose to its satisfation that the roduts are defetive, and anadjustment is required, the amount of suh adjustment shall not exeedthe net sales rie of the defetive roduts only and no allowanewill be made for labor or exense of reairing or relaing defetiveroduts or workmanshi of damage resulting from the same. Sellerwarrants the roduts whih it sells of other manufaturers to theextent of the warranties of their resetive makers. Where engineeringdesign or fabriation work is sulied. Buyers aetane of Sellersdesign or of delivery of work shall relieve Seller of all further obligation,other than exressed in Sellers rodut warranty. THIS IS SELLERSSOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY
KIND, EXpRESSED OR IMpLIED AND ALL IMpLIED WARRANTIES OFMERcHANTABILITY AND FOR A pARTIcULAR pURpOSE WHIcHEXcEED SELLERS AFORESTATED OBLIGATION ARE HEREBYDIScLAIMED BY SELLER AND EXcLUDED FROM THIS WARRANTY.Seller neither assumes, nor authorizes any erson to assume for it, anyother obligation in onnetion with the sale of its engineering designsor roduts. This warranty shall not aly to any roduts or arts ofroduts whih (a) have been reaired or altered outside of Sellersfatory, in any manner: (b) have been subjeted to misuse, negligene oraidents; () have been used in a manner ontrary to Sellers instrutionsor reommendations. Seller shall not be resonsible for design errorsdue to inaurate or inomlete information sulied by Buyer or itsreresentatives.
4. SELLERS LIABILITY:
Seller will not be liable for any loss, damage, ost of reairs, inidental
or onsequential damages of any kind, whether based uon warranty(exet for the obligation aeted by Seller under Warrantyabove), ontrat or negligene, arising in onnetion with the design,manufature, sale, use or reair of the roduts or of the engineeringdesigns sulied to Buyer.
5. RETURNS:
Seller annot aet return of any roduts unless its written ermissionhas been first obtained, in whih ase same will be redited subjet tothe following (a) All material returned must, on its arrival at Sellers plant,be found to be in first-lass ondition; if not, ost of utting in saleableondition will be deduted from redit memoranda; (b) A handlingharge dedution of twenty erent (20%) will be made from all reditmemoranda issued for material returned; () Transortation harges, ifnot reaid will be deduted from redit memoranda.
6. SHIPMENTS:
All roduts sent out will be arefully examined, ounted and aked.The ost of any seial aking or seial handling aused by Buyersrequirements or requests shall be added to the amount of the order. Nolaim for shortages will be allowed unless made in writing within ten (10)days of reeit of a shiment.
claims for roduts damaged or lost in transit should be made on thearrier, as Sellers resonsibility eases, and title asses, on delivery tothe arrier.
7. SPECIAL PRODUCTS:
Orders overing seial or nonstandard roduts are not subjet toanellation exet on suh terms as Seller may seify on aliation.
8. PRICES AND DESIGNS:
pries and designs are subjet to hange without notie. All ries areF.O.B. point of shiment, unless otherwise stated.
9. TAXES:
The amount of any sales, exise or other taxes, if any, aliable tothe roduts overed by this order, shall be aid by Buyer unless Buyer
rovides Seller with an exemtion ertifiate aetane to the taxingauthorities.
10. NUCLEAR PLANTS:
Where the roduts, engineering design or fabriation is for nulearlant aliations. Buyer agrees (a) to take all neessary stes to addSeller as an insured under the Amerian Nulear Insurers (ANI) ool andunder the Mutual Atomi Energy Reinsurane pool (MAERp) for roertydamage and liability insurane and if neessary stes ould have beentaken, but are not taken, Buyer shall hold Seller harmless against allsuh losses whih ould have been thus overed (b) Buyer agrees to holdSeller harmless with reset to any ersonal injury (or death), roertydamage or other loss in a nulear inident whih is aused diretly orindiretly by defetive design, material, workmanshi furnished by Seller(or whih ould be so overed but with reset to whih Buyer has eletedto self-insure), and further agrees to waive subrogation by its arriers ofsuh insurane against Seller, and () as to nulear hazards for whihBuyer annot obtain insurane overage, the liability of Seller for anyersonal injury (or death), roerty damage or other loss diretly ausedby defetive design, material, or workmanshi furnished by Seller shallnot exeed the value at the time of the loss ourrene.
11. MINIMUM INVOICE:
Domesti: $100 lus transortation.International: $500 lus transortation.
12. TERMS:
cash, net 30 days unless otherwise seified.
NOTE: All orders are aeted on the basis of ries in effet at the timeof shiment.
NOTIcE: The ries and terms quoted, there will be added anymanufaturers or sales tax ayable on the transation under any effetivestatute.
FREIGHT ALLOWANcE: All ries are F.O.B. oint of shiment. Onshiments weighing 2,500 ounds or more, rail freight or motor freightat the lowest ublished rate, is allowed to all ontinental U.S. rail ointsor all U.S. highway oints listed in ublished tariffs (Alaska and Hawaiiexluded). In no ase will more than atual freight be allowed. Shiments(weighing less than 2,500 ounds) will be shied reaid. The buyer willbe invoied for freight osts at the aliable ublished lass, exetion orommodity rate(s) or harge(s). Anvil reserves the right to selet the arrierfor all shiments.
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
3/8
www.anvilintl.comevised:
Forged steel anvilets Price Listec d: Juy 26, 2009 | rpc P d: augu 2008 | sh # Uan-1.09 | M spcfc - astM a-10
uNiVErsaL
Butt wELD aNViLEtssndd Xs
RUN SIZE COMBINATIONS:Anvilets are manufactured to cover many run sizes. The range of run sizes is based on a maximum gap between the fitting and the pipe of the largest size of run pipe shown of the fitting. The following chart showsthe range of run pipe sizes per outlet size. All sizes are in inches.
uNiVErsaL
thrEaDED aNViLEtsCl 3000 Cl 6000
uNiVErsaL
soCKEt wELD aNViLEtsCl 3000 Cl 6000
CROTCH GAP
.062 MAX.
SKIRT GAP
.062 MAX.
6-
-6-
6-
6-
-6-
-6-6-8
-6-
-6-6-8
-0-56-
-6-5-86-6
6-50-80-6-
6 680-8-6
-0-6-6
6-
6- -
6- -
6-
-6-
-
5-6-6
-6-
-6-6-8
-0-56-
-
6-5-86-6
6-50-80-6-
6 680-8-6-0-6
-6
-6-
-6-
6-
-6-
-6-
--6-
-5-6-6
-6-6-8
-6-6-8
5--66-6
6-50-80-6-
-6-
-6-
6-
-6-
-
6- --8-6-0
-5-6-6
-6-6-8
-
5-0-66-6-8
6-5-86-
560-88-
6-0
6-
-6-
6-
-6-
-6-
--6-
-5-6-6
-6-6-8
-6-6-8
5--66-6
6-50-80-6-
6- 6-
6- -
6-
-6-
-
6-5 -5-6-6
-6-6-8
-5-8-66-0
-5-
0-66-6-8
58-6-06-6
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
4/8
www.anvilintl.comevised:
Forged steel anvilets Price Listec d: Juy 26, 2009 | rpc P d: augu 2008 | sh # Uan-1.09 | M spcfc - astM a-10
Universal BUtt Weld anvilets
Outlet sizes 6 and 8 - order to specific size and combination.Size on size POA.
POA = Price on Application
nSold in box only.
Outlet Size(incheS)
Standard Schedule 40 XS Schedule 80
liStPrice
aPPrOXwt. ea.
Quantity liStPrice
aPPrOXwt. ea.
Quantity
BOX Pallet BOX Pallet
POA - - - POA - - -
POA - - - POA - - -
POA - - - POA - - -
$20.55 0.20 25 5,000 $24.04 0.18 25 1,800
$21.68 0.35 25 5,000 $24.64 0.40 - -
$22.66 0.50 25 2,700 $25.70 0.75 - -
POA 1.00 - - POA - - -
$26.92 1.00 25 1,800 $32.77 1.00 25 1,125
$27.15 2.00 25 1,125 $33.88 2.00 25 1,125
$62.18 3.00 18 810 POA 3.00 - -
$68.06 4.00 10 450 $74.70 4.00 10 450
$86.00 6.00 8 360 $94.95 6.00 8 360
5 $212.22 9.00 6 240 POA 9.00 - -
6 $243.47 12.00 2 90 $391.99 14.00 2 90
8 $465.23 18.00 2 90 $713.35 29.00 2 90
0 $670.13 27.00 - - POA 36.00 - -
$1,272.83 44.00 - - POA 67.00 - -
POA 56.00 - - POA 73.00 - -
6 POA 76.00 - - POA 102.00 - -
8 POA 97.00 - - POA 130.00 - -
0 POA 120.00 - - POA 166.00 - -
POA 195.00 - - POA 262.00 - -
Outlet Size(incheS)
XXS Schedule 160
liStPrice
aPPrOXwt. ea.
Quantity liStPrice
aPPrOXwt. ea.
Quantity
BOX Pallet BOX Pallet
$106.47 0.25 25 5,000 $106.47 0.25 25 1,800
$108.79 0.70 25 5,000 $108.79 0.70 25 1,800
$114.35 0.85 25 2,700 $114.35 0.85 25 1,800
POA 1.25 - - POA 1.25 - -
$153.45 1.75 25 1,800 $153.45 1.75 25 1,125
$173.38 2.15 25 1,125 $173.38 2.15 25 1,125
POA 3.40 - - POA 3.40 - -
$276.31 6.30 10 450 $276.31 6.30 10 450
$494.27 10.50 8 360 $494.27 10.50 8 360
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
5/8
www.anvilintl.comevised:
Forged steel anvilets Price Listec d: Juy 26, 2009 | rpc P d: augu 2008 | sh # Uan-1.09 | M spcfc - astM a-10
Universal tHreaded anvilets
Universal soCKet Weld anvilets
nSold in box only.Size on size POA.
nSold in box only.Size on size POA.
Outlet Size(incheS)
3000# 6000#
liStPrice
aPPrOXwt. ea.
Quantity liStPrice
aPPrOXwt. ea.
Quantity
BOX Pallet BOX Pallet
POA - - - - - - - POA - - - - - - -
POA - - - - - - -
$9.92 0.24 25 5,000 $18.18 0.45 25 2,700
$11.43 0.38 25 5,000 $19.93 1.00 25 1,800
$13.32 1.00 25 2,700 $24.72 1.00 25 1,800
$21.12 1.00 25 1,800 POA - - -
$21.12 1.00 25 1,800 $115.72 1.00 25 1,800
$24.05 2.00 25 900 $129.33 5.00 25 1,125
$80.66 3.00 18 810 - - - -
$97.82 4.00 10 450 - - - -
$181.91 7.00 8 360 - - - -
Outlet Size(incheS)
3000# 6000#
liStPrice
aPPrOXwt. ea.
Quantity liStPrice
aPPrOXwt. ea.
Quantity
BOX Pallet BOX Pallet
POA - - - - - - -
POA - - - - - - -
POA - - - - - - -
$12.31 0.14 25 5,000 $21.74 0.45 25 2,700
$12.49 0.37 25 5,000 $23.11 1.00 25 1,800
$13.85 1.00 25 2,700 $29.35 1.00 25 1,125
$23.13 1.00 25 1,800 POA 1.00 - -
$23.13 1.00 25 1,800 $112.95 2.00 25 1,125
$26.29 2.00 25 1,125 $136.26 2.00 25 1,125
$115.20 3.00 18 810 - - - -
$155.56 4.00 10 450 - - - -
$230.59 7.00 8 360 - - - -
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
6/8
www.anvilintl.comevised:
Forged steel anvilets Price Listec d: Juy 26, 2009 | rpc P d: augu 2008 | sh # Uan-1.09 | M spcfc - astM a-10
Outlet SizeincheS
Fig. 2809threaded 3000#
aPPrOX.wt. ea.
BOXQty.
$106.01 0.65 25
$108.02 0.75 25
$115.76 1.15 25
POA 1.90 -
$210.02 2.65 25
$401.16 5.25 15
Fig. 2808 & 2858 (XS)Butt Std. & XS
aPPrOX.wt. ea.
BOXQty.
POA 0.65 -
POA 0.75 -
POA 1.15 -
POA 1.90 -
POA 2.65 -
POA 5.25 -
elBOw Sizerange
Outlet SizeincheS
Fig. 2811 & 2862 (XS)Butt Std. & XS
Fig. 2806threaded 3000#
Fig.2807SOcket 3000#
Fig. 2856threaded 6000#
Fig. 2857SOcket 6000#
aPPrOX.wt. ea.
BOXQty.
6-3 $71.52 $35.83 $53.90 $78.12 $83.88 0.65 25
6- $84.39 $42.47 $54.91 $85.77 $92.18 0.75 25
6- $92.05 $46.95 $58.42 $101.11 $113.61 1.15 25
6- POA POA POA POA POA 1.90 -
6- $150.43 $103.92 $122.93 $136.77 $152.21 2.65 25
6- $171.77 $116.88 $136.97 - - 5.25 15
elBoW anvilets (lg ru)
lateral anvilets
Flat anvilets
Outlet sizes 6 and 8 order to seifi sizeand ombination.
carton shedule for Anvilets , through 1-25pcs. per carton. 2-15 pcs. per carton andu cartoned as er order.
*Flat Anvilets Butt Weld Std. & XS - pOA
*Flat Anvilets Threaded 6000# - pOA*Flat Anvilets Soket Welding 6000# - pOApOA = prie on Aliation
Size on size - POA.
Outlet Size(incheS)
Flat anviletS* SOcketaPPrOX.wt. ea.
BOXQty.
threaded 3000#Fig. 2804
Butt weldStd. & XS
SOcket weld3000# Fig. 2805
POA POA POA 0.28 -
POA POA POA 0.40 -
POA POA POA 0.75 -
POA POA POA 1.00 - POA POA POA 1.30 -
POA POA POA 1.80 -
May 2009
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
7/8
notes
-
8/2/2019 07-ANPL025_ForgedSteel_UANRevMay272009
8/8
Corporae Offices
110 Corporate Drive, Suite 10P.O. Box 3180Portsmouth, NH 03802-3180
Tel: 603-422-8000Fax: 603-422-8033
E-mail: [email protected]
Ani InernaionaWorwie CusomerSerice Cener
Tel: 708-885-3000Fax: 708-534-5441
Easern Reion
Servicing: Connecticut, Delaware, Florida,
Georgia, Maine, Maryland, Massachusetts, New Hampshire,
New Jersey, New York, North and South Carolina,
East Pennsylvania, Rhode Island, Vermont, Virginia
800 Malleable Road
Columbia, PA 17512
Tel: 708-885-3000
Fax: 708-534-5441
Toll Free: 1-800-301-2701
Norhern Reion
Servicing: Illinois, Indiana, Iowa, Kentucky, Michigan,
Minnesota, Nebraska, North and South Dakota, Ohio,
West Pennsylvania, West Virginia, Wisconsin
750 Central Avenue
University Park, IL 60466
Tel: 708-885-3000
Fax: 708-534-5441
Toll Free: 1-800-301-2701
Souhern ReionServicing: Alabama, Arkansas, Kansas, Louisiana,
Mississippi, Missouri, Oklahoma, Tennessee, Texas
1401 Valley View Lane
Suite 150
Irving, TX 75061-3541
Tel: 972-343-9206
Fax: 972-641-8946
Toll Free: 1-800-451-4414
Wesern Reion
Servicing: Alaska, Arizona, California, Colorado,
Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon,Utah, Washington, Wyoming
1385 Greg Street
Sparks, NV 89431
Tel: 775-331-7029
Fax: 775-331-5075
Toll Free: 1-800-572-0051
U.S. REgIONAl SERvICE CENtERS
Ani Inernaiona Canaa
Corporae
Michael J. Warne, General Manager
390 Second Avenue
P.O. Box 40
Simcoe, Ontario N3Y 4K9
Tel: 519-426-4551
Fax: 519-426-5509
Quebec & Aanic
2625 Brabant Marineau
St. Laurent, Quebec H4S 1R8
Tel: 514-745-3835
Fax: 514-745-9079
Toll Free: 1-800-661-8998
Onario
390 Second Avenue
P.O. Box 40
Simcoe, Ontario N3Y 4K9
Tel: 519-426-4551
Fax: 519-426-5509
Toll Free: 1-800-661-8998
Manioba, Saskachewan,Abera & Briish Coumbia
5506-48 St. NW
Edmonton, Alberta T6B 2Z1
Tel: 780-413-8274
Fax: 780-413-8298
Toll Free: 1-800-661-8998
CANAdA SERvICE CENtERS
Europe an Mie Eas Rei
Rick van Meesen, Sales Director
Tormentil 15
7483 BR Haaksbergen
The Netherlands
Tel: +31-53-5725570
Fax: +31-53-5725579
U.S. Customer ServiceTel: +1-708-885-3000
Fax: +1-708-534-5441
Mexico, Puero Rico anlain America
Abraham Quijada, Sales Manager
Tel: +1-281-590-4600
U.S. Customer Service
Tel: +1-708-885-3000
Fax: +1-708-534-5441
INtERNAtIONAl SAl
www.altl.om
b u i l d i n g c o n n e c t i o n s t h a t l a s t
#608/ Printed in USARevision: 2 May