04_ rate for pumpsets
TRANSCRIPT
-
8/13/2019 04_ Rate for Pumpsets
1/41
Sl.
No.
Duty
lpm x mH.P. of Pumpset Unit
Rate for 2013-14
in Rupees
1 2 3 4 51 100x20 1 1 No 7266.00
2 150x20 1.5 1 No 10704.00
3 200x20 2 1 No 11123.00
4 250x20 2 1 No 12310.00
5 300x20 3 1 No 14231.00
6 350x20 3 1 No 14231.00
7 400x20 3 1 No 14766.00
8 450x20 3 1 No 14766.00
9 500x20 5 1 No 14766.00
10 700x20 5 1 No 17502.00
11 50x35 3 1 No 11553.00
12 100x35 3 1 No 13129.00
13 150x35 3 1 No 18260.00
14 200x35 5 1 No 20557.00
15 250x35 5 1 No 20557.00
16 300x35 7.5 1 No 22822.00
17 350x35 7.5 1 No 22822.00
18 400x35 7.5 1 No 23933.00
19 450x35 7.5 1 No 24055.00
20 500x35 7.5 1 No 24055.00
21 50x50 5 1 No 20556.00
22 100x50 5 1 No 20556.00
23 150x50 7.5 1 No 22409.00
24 200x50 7.5 1 No 22409.00
25 250x50 7.5 1 No 22409.00
26 300x50 7.5 1 No 24651.0027 350x50 10 1 No 28078.00
28 400x50 10 1 No 28078.00
29 500x60 12.5 1 No 35141.00
Note:
1.0 CENTRIFUGAL MONOBLOC PUMPSET WITH ISI MARK AS PER
IS 9079/1989 WITHOUT PANEL BOARD (3 PHASE)
Rates are excluding excise duty and VAT.
Excise duty at 6.18% as extra
VAT at 5% on Rate +Excise Duty as extra
81
-
8/13/2019 04_ Rate for Pumpsets
2/41
1 2 3 4 5
1 15x40 0.50 1 No 11120.00
2 15x50 0.75 1 No 8809.00
3 15x60 0.75 1 No 11154.00
4 15x70 0.75 1 No 12888.00
5 15x80 1.00 1 No 12888.00
6 15x90 1.00 1 No 12888.00
7 15x100 1.00 1 No 16055.00
8 15x125 0.75 1 No 18239.00
9 15X150 0.75 1 No 19635.00
10 20x40 0.50 1 No 11154.00
11 20x50 0.75 1 No 8809.00
12 20x60 0.75 1 No 11154.00
13 20x70 1.00 1 No 12888.00
14 20x80 1.00 1 No 12888.00
15 20x90 1.00 1 No 14333.00
16 20x100 1.00 1 No 17094.00
17 20X125 1.50 1 No 18239.00
18 20X150 2.00 1 No 19520.00
Note: Rates are excluding excise duty and VAT
Excise duty at 6.18% as extra
VAT at 5% on Rate + excise duty as extra
2.0 SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034 WITHOUT
PANEL BOARD WITHOUT PANEL BOARD
Sl. No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
-
8/13/2019 04_ Rate for Pumpsets
3/41
1 2 3 4 5
1 30x40 0.50 1 No 11546.00
2 30x50 0.75 1 No 11654.00
3 30x60 0.75 1 No 12231.00
4 30x70 0.75 1 No 12888.00
5 30x80 1.00 1 No 15559.00
6 30x90 1.00 1 No 16979.00
7 30x100 1.50 1 No 16979.00
8 30x125 2.00 1 No 18596.00
9 40x40 0.75 1 No 11546.00
10 40x50 0.75 1 No 12231.00
11 40x60 1.00 1 No 12231.00
12 40x70 1.00 1 No 15998.00
13 40x80 1.00 1 No 17525.00
14 40x90 1.50 1 No 18649.00
15 40x100 1.50 1 No 18649.00
Note:Rates are excluding excise duty and VAT.
Excise duty at 4.12% as extra.
VAT at 5% on Rate + excise duty as extra.
3.0 3 PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 100MM DIA BOREWELL
WITH ISI MARK IS 8034 WITHOUT PANEL BOARD
Sl. No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
-
8/13/2019 04_ Rate for Pumpsets
4/41
1 2 3 4 5
1 50x40 2.00 1 No 16496.00
2 50x50 2.00 1 No 17312.00
3 50x60 2.00 1 No 18162.00
4 50X75 3.00 1 No 19363.00
5 50x100 3.00 1 No 26565.00
6 50x125 4.00 1 No 26591.00
7 50x175 5.00 1 No 34188.00
8 50x200 6.00 1 No 37422.00
9 50x225 7.00 1 No 48187.00
10 50x250 10.00 1 No 48759.00
11 50x275 10.00 1 No 56183.00
12 75x40 2.00 1 No 16774.00
13 75x50 2.00 1 No 17312.00
14 75x60 3.00 1 No 18162.00
15 75x75 3.00 1 No 20711.00
16 75x100 4.00 1 No 26565.00
17 75x125 4.00 1 No 31231.00
18 75x150 5.00 1 No 33611.00
19 75x175 6.00 1 No 27531.00
20 75x200 7.50 1 No 36758.00
21 75x225 10.00 1 No 48673.00
22 75x250 10.00 1 No 56183.00
23 75x275 10.00 1 No 54942.00
24 100x30 1.50 1 No 15862.00
25 100x40 2.00 1 No 16774.00
26 100x50 3.00 1 No 19257.00
27 100x60 3.00 1 No 19363.00
28 100x75 3.00 1 No 23972.00
29 100x100 4.00 1 No 27583.00
3.1 3 PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL
WITH ISI MARK IS 8034 WITHOUT PANEL BOARD
Sl.No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
-
8/13/2019 04_ Rate for Pumpsets
5/41
Sl.No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
30 100x125 5.00 1 No 32176.00
31 100x175 7.50 1 No 30681.0032 100x200 10.00 1 No 36758.00
33 100x225 10.00 1 No 48673.00
34 100x250 10.00 1 No 50368.00
35 125x25 1.50 1 No 15862.00
36 125x40 3.00 1 No 16774.00
37 125x50 3.00 1 No 19257.00
38 125x60 3.00 1 No 21653.00
39 125x75 3.00 1 No 23175.00
40 125x100 4.00 1 No 28446.00
41 125x125 6.00 1 No 33611.00
42 125x200 10.00 1 No 45246.00
43 125x225 10.00 1 No 50368.00
44 150x25 1.50 1 No 15862.00
45 150x40 3.00 1 No 16774.00
46 150x50 3.00 1 No 17312.00
47 150x60 3.00 1 No 21653.00
48 150x75 4.00 1 No 23175.00
49 150x100 5.00 1 No 31231.00
50 150x125 6.00 1 No 33611.00
51 175x40 3.00 1 No 16774.00
52 175x50 3.00 1 No 21153.00
53 175x60 3.00 1 No 21653.00
54 175x75 4.00 1 No 21653.00
55 175x100 6.00 1 No 31231.00
56 200x25 2.00 1 No 15862.00
57 200x40 3.00 1 No 16774.0058 200x50 4.00 1 No 21435.00
59 200x60 5.00 1 No 23849.00
60 200x75 5.00 1 No 23972.00
61 200x100 6.00 1 No 31231.00
62 200x125 7.50 1 No 34709.00
-
8/13/2019 04_ Rate for Pumpsets
6/41
Sl.No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
63 250x40 3.00 1 No 16774.00
64 250x50 4.00 1 No 21435.0065 250x60 5.00 1 No 23175.00
66 250x75 6.00 1 No 27334.00
67 250x100 7.50 1 No 34143.00
68 250x125 10.00 1 No 39955.00
69 300x40 4.00 1 No 22263.00
70 300x50 5.00 1 No 23175.00
71 300x60 6.00 1 No 27334.00
72 300x75 7.50 1 No 31979.00
73 300x100 12.50 1 No 38515.00
74 350x40 5.00 1 No 21435.00
75 350x50 6.00 1 No 23849.00
76 350x60 7.50 1 No 31979.00
77 350x75 10.00 1 No 34143.00
78 350x100 12.50 1 No 39955.00
79 400x40 6.00 1 No 25832.00
80 400x50 7.50 1 No 31709.00
81 400x60 7.50 1 No 31945.00
82 400x75 10.00 1 No 41287.00
83 500x40 7.50 1 No 26762.00
84 500x50 7.50 1 No 35199.00
85 500x75 12.50 1 No 44632.00
86 600x40 7.50 1 No 29068.00
87 600x50 12.50 1 No 39172.00
88 600x75 12.50 1 No 45133.00
Note: Rates are excluding excise duty and VAT.
Excise duty at 4.12% as extra.
VAT at 5% on Rate + excise duty as extra.
-
8/13/2019 04_ Rate for Pumpsets
7/41
1 2 3 4 5
1 50x25 1.00 1 No 13804.00
2 50x40 1.00 1 No 13804.00
3 50x50 1.50 1 No 16393.00
4 50x60 2.00 1 No 20502.00
5 50x75 4.00 1 No 29875.00
6 50x100 5.00 1 No 36511.00
7 50x125 6.00 1 No 44290.00
8 75x25 1.00 1 No 13804.00
9 75x40 1.50 1 No 15684.00
10 75x50 2.00 1 No 17536.0011 75x60 2.00 1 No 20502.00
12 75x75 4.00 1 No 29875.00
13 75x100 5.00 1 No 36511.00
14 75x125 6.00 1 No 43749.00
15 75x150 7.50 1 No 55882.00
16 100x25 1.00 1 No 14930.00
17 100x40 2.00 1 No 17536.00
18 100x50 3.00 1 No 17556.00
19 100x60 4.00 1 No 29875.00
20 100x75 4.00 1 No 29875.00
21 100x100 5.00 1 No 36511.0022 100x125 6.00 1 No 44290.00
23 125x25 3.00 1 No 14930.00
24 125x40 3.00 1 No 17556.00
25 125x50 3.00 1 No 22806.00
26 125x75 4.00 1 No 29875.00
27 125x100 5.00 1 No 36511.00
28 125x125 6.00 1 No 44290.00
29 150x25 3.00 1 No 14930.00
30 150x40 3.00 1 No 17556.00
31 150x50 3.00 1 No 17556.00
32 150x60 4.00 1 No 30165.0033 150x75 4.00 1 No 29875.00
34 150x100 5.00 1 No 36511.00
35 150x125 7.50 1 No 55882.00
36 175x25 3.00 1 No 14930.00
37 175x40 3.00 1 No 17556.00
38 175x50 3.00 1 No 22806.00
4.0 OPENWELL SUBMERSIBLE PUMPSET WITH ISI MARK IS 14220 WITHOUT
PANEL BOARD
Sl. No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
-
8/13/2019 04_ Rate for Pumpsets
8/41
Sl. No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
39 175x60 4.00 1 No 29875.00
40 175x75 5.00 1 No 29875.00
41 175x100 6.00 1 No 36511.0042 200x25 3.00 1 No 14930.00
43 200x40 4.00 1 No 17556.00
44 200x50 4.00 1 No 17556.00
45 200x60 4.00 1 No 29875.00
46 200x75 6.00 1 No 29875.00
47 200x100 7.50 1 No 36511.00
48 200x125 10.00 1 No 66194.00
49 250x25 3.00 1 No 14930.00
50 250x40 4.00 1 No 17556.00
51 250x50 5.00 1 No 22806.00
52 250x60 5.00 1 No 29875.00
53 250x75 7.50 1 No 36511.00
54 250x100 7.50 1 No 40604.00
55 250x125 10.00 1 No 81197.00
56 300x25 3.00 1 No 14930.00
57 300x40 5.00 1 No 17556.00
58 300x50 5.00 1 No 22806.00
59 300x60 6.00 1 No 29875.00
60 300x75 10.00 1 No 36511.00
61 300x100 10.00 1 No 40604.00
62 350x25 3.00 1 No 17556.00
63 350x40 5.00 1 No 25687.00
64 350x50 7.50 1 No 22806.00
65 350x60 7.50 1 No 29875.00
66 350x75 10.00 1 No 36511.00
67 350x100 10.00 1 No 40604.00
68 400x25 3.00 1 No 17556.00
69 400x40 5.00 1 No 25687.00
70 400x50 5.00 1 No 22806.00
71 400x60 7.50 1 No 32256.00
72 400x75 10.00 1 No 40604.00
73 500x25 5.00 1 No 17556.00
74 500x40 5.00 1 No 25687.00
75 500x50 5.00 1 No 22806.00
76 500x75 10.00 1 No 40604.00
77 600x25 5.00 1 No 17556.00
78 600x40 7.50 1 No 25687.00
79 600x50 7.50 1 No 32256.00
80 600x75 10.00 1 No 40604.00
-
8/13/2019 04_ Rate for Pumpsets
9/41
Sl. No.Duty
lpm x m
H.P. of
PumpsetUnit
Rate for 2013-14
in Rupees
81 700x40 10.00 1 No 30146.00
82 700x60 10.00 1 No 40604.00
83 700x80 10.00 1 No 40604.0084 700x100 10.00 1 No 40604.00
85 800x40 10.00 1 No 30146.00
86 800x60 10.00 1 No 40604.00
87 800x80 10.00 1 No 40604.00
88 800x100 10.00 1 No 40604.00
89 900x40 10.00 1 No 40604.00
90 900x60 10.00 1 No 40604.00
91 900x80 10.00 1 No 40604.00
92 900x100 10.00 1 No 40604.00
93 1000x40 12.50 1 No 45980.00
94 1000x60 15.00 1 No 48258.00
95 1000x80 20.00 1 No 54390.00
96 1000x100 25.00 1 No 83050.00
97 1250x40 20.00 1 No 51030.00
98 1250x60 25.00 1 No 83050.00
99 1250x80 35.00 1 No 90530.00
100 1250x100 35.00 1 No 87194.00
101 1500x40 20.00 1 No 55770.00
102 1500x60 30.00 1 No 80190.00
103 1500x80 35.00 1 No 93720.00
104 1500x100 50.00 1 No 170941.00
105 2000x40 30.00 1 No 84150.00
106 2000x60 35.00 1 No 93720.00
107 2000x80 35.00 1 No 93720.00
108 2000x100 35.00 1 No 93720.00
109 2500x40 35.00 1 No 93720.00
110 2500x60 35.00 1 No 93720.00
111 2500x80 35.00 1 No 93720.00
112 2500x100 35.00 1 No 93720.00
Note: Rates are excluding excise duty and VAT.
Excise duty at 6.18% as extra.
VAT at 5% on Rate + excise duty as extra
-
8/13/2019 04_ Rate for Pumpsets
10/41
25 30 35 40 45 50 55 60 70 80 90
1 1500 2.04 2.04 2.41 2.41 2.43 3.09 3.13 3.16 3.34 3.34 3.74
2 2500 2.04 2.04 2.49 2.58 3.13 3.15 3.13 4.04 3.70 3.83 3.83
3 3000 2.15 2.04 2.58 2.58 2.80 2.90 2.90 4.13 4.13 3.96 3.99
4 3500 2.04 2.04 2.58 2.58 3.66 3.76 4.18 4.34 4.40 4.79 4.79
5 4000 2.36 2.36 2.58 2.58 3.34 3.76 4.06 4.13 4.23 4.23 4.23
6 5000 2.73 2.73 2.73 2.96 3.89 4.28 4.31 4.75 4.93 4.93 4.93
7 6000 2.58 2.58 3.83 3.89 3.89 4.35 4.67 5.13 5.38 5.38 5.38
8 7000 3.55 3.68 3.89 3.89 4.26 4.44 4.54 5.13 5.14 9.34 9.34
9 8000 3.56 3.39 3.69 4.44 4.44 4.44 4.63 4.76 8.74 8.74 8.74
10 9000 3.56 3.80 3.83 4.44 4.46 4.45 4.51 4.61 9.34
11 10000 3.56 3.90 3.84 4.46 4.74 4.64 4.64 8.49 10.71 10.71 10.79
12 15000 4.38 4.53 4.40 5.41 5.41 6.54 7.15 9.34 10.71 10.71 10.79
13 20000 4.81 4.90 4.91 11.39 12.53 12.53 12.53 12.53 12.53 12.53 12.5314 25000 12.25 12.53 12.53 12.53 12.53 12.53 12.53 12.53 12.53 12.53 12.53
15 30000 12.46 12.94 13.55 13.55 13.55 13.55 13.55 16.25 17.88
HORIZONTAL SPLIT CASTING CENTRIFUGAL PUMP (1500 RPM)
(BRONZE IMPELLER AND SS10 SHAFT)
Rupees in Lakhs
Sl.N
o.
Pump
Capacity in
LPM
Rate for 2013-14 in Rupees
Head in Metres
Note: 1) The rates are inclusive of MS base plate, flexible tyre coupling and foundation bolts.
2) The rates are inclusive of all duties taxes handling charges and at
F.O.R. destination.
3) Efficiency may be taken from
-
8/13/2019 04_ Rate for Pumpsets
11/41
Sl.No
KW HP Rate for 2013-14in Rupees
1 2 3 4
1 9.3 12.5 81563.00
2 11 15 85811.00
3 15 20 106868.00
4 18.5 25 137750.00
5 22 30 151500.00
6 30 40 175363.00
7 37 50 218923.00
8 45 60 282338.00
9 55 75 261250.00
10 75 100 408375.00
11 90 120 430375.00
12 110 150 542625.00
13 125 170 698125.00
14 132 180 739500.00
15 150 200 746750.00
16 160 215 818500.00
17 180 240 871750.00
18 187 250 912250.00
19 200 270 978500.00
20 220 300 1281625.00
21 250 335 1461192.00
22 280 375 2025125.00
23 300 400 2172750.00
Note:
HORIZONTAL SQUIRREL CAGE MOTOR 1500 RPM
AC 3 Phase /415 V/ Horizontal SPDP 4 Pole Squirrel cage Induction motor
for HSC Centrifugal pumps
The above rates are inclusive of excise duty, taxes, handling charges
etc.,
Excise duty at 12.36,VAT at 5%
-
8/13/2019 04_ Rate for Pumpsets
12/41
-
8/13/2019 04_ Rate for Pumpsets
13/41
Sl.No KW HPRate for 2013-14
in Rupees
1 2 3 4
1 9.3 12.5 74534
2 11 15 78320
3 15 20 110379
4 18.5 25 130356
5 22 30 167790
6 30 40 209291
7 37 50 261602
8 45 60 322264
9 55 75 369206
10 75 100 443155
11 90 120 502690
12 110 150 645431
13 125 170 767925
14 132 180 767925
15 150 200 819718
16 160 215 884035
17 180 240 1237200
18 187 250 1256988
19 200 270 1360531
20 220 300 1539083
21 250 335 1723007
HORIZONTAL SQUIRREL CAGE MOTOR 1000 RPM
AC 3 Phase /415 V/ Horizontal SPDP 6 Pole Squirrel cage Induction moror
for HSC Centrifugal pumps
Note: The rates are inclusive of excise duty,taxes,
handling charges etc.,
Excise duty at 12.36%,VAT at 5%.
-
8/13/2019 04_ Rate for Pumpsets
14/41
15m 20m 30m 40m 50m 60m 70m 80m 90m 100m
1 1500
2 2000
3 3000
4 4000
5 5000
6 6000
7 7000
8 8000
9 10000
10 15000
11 20000
12 25000
13 30000
Note:
1) The above rates are including excise duty at12.36%, VAT 5% ,transportaion and
handling charges etc.,
2) Multiply with 1.15 for oil lubricated pumps (for raw water)
3) Rates given are with suspension length of 7m, bronze impeller, SS 40
8.0 VERTICAL TURBINE PUMP (WATER LUBRICATED)1500 RPM SUITABLE FOR
VERTICAL HOLLOW SHAFT SQUIRREL CAGE INDUCTION MOTOR
Rupees in lakhs
Sl.N
o.
Pump
Capacity
in LPM
Rate for 2013-14 in Rupees
Head in meters
-
8/13/2019 04_ Rate for Pumpsets
15/41
Sl.No KW HPRate for 2013-14
in Rupees1 2 3 4
1 18.5 25
2 22 30
3 30 40
4 37 50
5 45 601
6 55 75
7 75 100
8 90 120
9 110 150
10 125 170
11132 180
12 150 200
13 160 215
14 180 240
15 187 250
16 200 270
17 220 300
18 250 335
19 280 375
20 300 400
9.0 VERTICAL HOLLOW SHAFT MOTORS FOR TURBINE PUMP
AC 3 Phase /415 V/ Vertical Hollow Shaft TEFC & SPDP 4 Pole Squirrel cage
Induction moror 1500RPM
TEFC MOTORS
SPDP MOTORS
Note: The rates are inclusive of excise duty,taxes,etc.,
Excise duty at 12.36%, VAT at 5%.
-
8/13/2019 04_ Rate for Pumpsets
16/41
-
8/13/2019 04_ Rate for Pumpsets
17/41
11KV 22 KV 11KV/22KV
1 2 3 4 5
1 160 219600.00 234000.00 261000.00
2 200 243000.00 261000.00 288000.00
3 250 265500.00 288000.00 315000.00
4 315 327600.00 344700.00 378000.00
5 400 392400.00 445500.00 479700.00
11KV/433V 22KV/433V
1 3 4
1 524700.00 564300.00
2 653400.00 693000.00
3 803000.00 882000.00
4 957000.00 1035000.00
Note : Excise duty at 12.36%, TNVAT at 5% and handling charges are extra
10.1 OIL NATURAL AND AIR NATURAL COOLED COPPER WINDING H.T.
TRANSFORMER CONFORMING TO IS 2026
10.0 IRON CORE OIL COOLED TRANSFORMERS WITH COPPER WINDING
CONFIRMING TO IS 2026
Sl.No Rating in KVA
Rate for 2013-14 in Rupees
Note :- Excise duty at 12.36 % and TNVAT at 5% and handling charges are extra.
750/800
1000
Sl.No. Rating in KVA
Rate for 2013-14 in Rupees
2
500
630
-
8/13/2019 04_ Rate for Pumpsets
18/41
Sl. No. HP Unit Rate for 2013-14 in Rupees
1 1 1 No. 4065.00
2 1.5 1 No 4453.00
3 2 1 No 5082.00
Note
Sl. No. HP Unit Rate for 2013-14 in Rupees
1 1 1 No. 9020.00
2 2 1 No 9020.00
3 3 1 No 9020.00
4 4 1 No. 9020.00
5 5 1 No 9020.00
6 6 1 No 9020.00
Note
4)For Timer facility if necessoryRs. 4000 may be added as extra.
2) Panel board should be provided as per specification given in Board
circular No. 23/DCE/QATA/2004/Dt. 23.8.2004
1) The rate are excluding excise duty and taxes2) Excise duty Nil and VAT at 5 % extra over the above rate.
3)The above rates are inclusive of two level guard worth
Rs.550/- and auto star facility worth Rs. 400/-
11.0 SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO
START
1) The rate are excluding excise duty and taxes
2) Excise duty Nil and VAT at 5 % extra over the above rate.
3)The above rates are inclusive of two level guard worth
Rs.550/- and auto star facility worth Rs. 400/-
4) Timer is not recommended for this panel board.
2) Panel board should be provided as per specification given in Boardcircular No. 23/DCE/QATA/2004/Dt. 23.8.2004
11.1 3 PHASE PANEL BOARD- D.O.L. WITH TWO LEVEL GUARD AND AUTO
START
-
8/13/2019 04_ Rate for Pumpsets
19/41
Sl. No. HP Unit Rate for 2013-14 in Rupees
1 6 1 No. 10660.00
2 7.5 1 No 12870.00
3 10 1 No 15015.00
4 12.5 1 No. 15675.00
5 15 1 No 15675.00
6 20 1 No 16500.00
7 25 1 No 16500.00
Note
11.2 3 PHASE PANEL BOARD-STAR DELTA WITH TWO LEVEL GUARD AND
AUTO START
The above rates are inclusive of all taxes ,duties and handling charges
Excise duty at 10.3 %,VAT 5 %)
1) The rate are excluding excise duty and taxes.
2) Excise duty Nil and VAT at 5 % extra over the above rate.
3)The above rates are inclusive of two level guard worth Rs.550/- and auto
star facility worth Rs. 400/-.
4) Timer is not recommended for this panel board.
2) Panel board should be provided as per specification given in Board
circular No. 23/DCE/QATA/2004/Dt. 23.8.2004.
11.3 DOL STARTER WITH SINGLE PHASING PREVNTOR WITH AMMETER
CONFORMING TO IS 13947 WITH AUTO RESTART FACILITY FOR PUMP
HOUSES WHERE PANEL BOARDS ARE AVAILABLE
Up to 10 HP rating Rs. 4416
-
8/13/2019 04_ Rate for Pumpsets
20/41
Sl.No. Description Unit Rate for 2013-14 in Rupees
1 30 to 37 1 No 167600.00
2 38 to 75 1 No 273200.00
3 76 to 135 1 No 409600.00
4 136 to 160 1 No 467000.00
5 161 to 250 1 No 640800.00
6 251 to 300 1 No 758400.00
7 301 to 500 1 No 1170800.00
8 501 to 750 1 No 1512200.00
Sl.No. Description Unit Rate for 2013-14 in Rupees
1 250 1 No 635600.00
2 300 1 No 698900.00
3 350 1 No 741100.00
4 400 1 No 790000.00
5 500 1 No 825500.00
6 600 1 No 931900.00
7 700 1 No 974000.00
8 800 1 No 1016200.00
9 900 1 No 1102400.00
10 1000 1 No 1185000.00
Note:
11.4 FLEX COMPENSATED MAGNETIC AMPLIFIER SOFT STARTER SUITABLE
FOR L.T.SQUIRREL CAGE MOTOR
11.5 FLEX COMPENSATED MAGNETIC AMPLIFIER SOFT STARTER SUITABLE
FOR H.T.SQUIRREL CAGE MOTOR
**
1)The rates are inclusive of excise duty taxes etc.
2) DOL starters are to be adopted up to 6 HP3) Air break fully automatic star delta starters are suggested for above 6 HP
upto 20HP except submersible pumpsets for which fully automatic ATS starters a
4) FCMA soft starter are to be adopted for 100 HP and above.
5)Excise duty at 12.36% VAT at 5%
-
8/13/2019 04_ Rate for Pumpsets
21/41
Sl.No KW Rating HP Unit Rate for 2013-14 in Rupees
1 7.5 10 1 No
2 11 15 1 No
3 15 20 1 No
4 18.5 25 1 No
5 22 30 1 No
6 30 40 1 No
7 37 50 1 No
Sl.No KW Rating HP Unit Rate for 2013-14 in Rupees
1 5.5 7.5 1 No
2 7.5 10 1 No
3 9 12.5 1 No
4 11 15 1 No
5 15 20 1 No
6 22 30 1 No
7 30 40 1 No
8 37 50 1 No
9 45 60 1 No
10 60 80 1 No
11 75 100 1 No
11.6 FULLY AUTOMATIC AIR BREAK STAR DELTA STARTER
WITH SINGLE PHASING PREVENTOR WITH AMMETER
CONFORMING TO IS 13947 WITH AUTO RESTART
FACILITY
The above rates are inclusive of all taxes, duties and handling charges.
Excise duty at 12.36%, VAT at 5%
11.7 FULLY AUTOMATIC AIR BREAK AUTO TRANSFORMER
STARTER WITH SINGLE PHASING PREVENTORY WITH
AMMETER WITH AUTO RESTART FACILITY
The above rates are inclusive of all taxes, duties and handling charges.
Excise duty at 12.36%, VAT at 5%
-
8/13/2019 04_ Rate for Pumpsets
22/41
3 Core 3.5 Core 4 Core
1 4sq.mm metre 42.00 -- 49.00
2 6sq.mm metre 51.00 -- 56.00
3 10sq.mm metre 58.00 -- 66.00
4 16sq.mm metre 61.00 -- 73.00
5 25sq.mm metre 76.00 89.00 97.00
6 35sq.mm metre 93.00 108.00 123.00
7 50sq.mm metre 123.00 140.00 158.00
8 70sq.mm metre 163.00 195.00 210.00
9 95sq.mm metre 213.00 240.00 268.00
10 120sq.mm metre 256.00 303.00 330.00
11 150sq.mm metre 312.00 359.00 403.00
12 185sq.mm metre 385.00 437.00 493.00
13 240sq.mm metre 486.00 554.00 625.00
14 300sq.mm metre 590.00 675.00 764.00
15 400sq.mm metre 755.00 861.00 978.00
With excise
duty
Without excise
duty
1 meter 36.00 32.00
2 meter 59.00 52.00
3 meter 85.00 76.00
4 meter 126.00 113.00
5 meter 214.00 192.00
6 meter 330.00 296.00
Note:
12.0 L.T. CABLES
3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE
CONFORMING TO IS 1554 PART I WITH ISI MARKING
Sl.No. Description UnitRate for 2013-14 in Rupees
Note: Excise duty 12.36% and VAT at 5% are extra
12.1 PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE
CONFORMING TO IS 694/1990
Sl.No. Description Unit
Rate for 2013-14 in Rupees
Excise duty at 12.36% and VAT at 5% are extra.
1.5 sq.mm
2.5 sq.mm
4.0 sq.mm
6.0 sq.mm
10.0 sq.mm
16.0 sq.mm
-
8/13/2019 04_ Rate for Pumpsets
23/41
For laying below GL
including earth
work per meter
For laying in trenches
inside the pump room
or in air per meter
1 90.00 60.00
2 130.00 86.00
3 190.00 150.00
Sl.No. UnitRate for 2013-14
in Rupees
1 each 180.00
2 each 220.00
3 each 320.00
Note:
11KV 12KV
1 3 C 240 sq.mm metre 787.00 962.00
2 3 C 185 sq.mm metre 656.00 813.00
3 3 C 150 sq.mm metre 557.00 723.00
4 3 C 120 sq.mm metre 495.00 650.00
5 3 C 95 sq.mm metre 420.00 589.006 3 C 70 sq.mm metre 376.00 519.00
Note:
up to 95 sq. mm
12.2 RATE FOR CABLE JOINTS INCLUDING JOINTING MATERIALS AND LABOUR
The cost of cable per meter will be the cost per joint
12.3 CABLE LAYING
Sl.No. Description
Rate for 2013-14 in Rupees
up to 95 sq. mm
95 to 240 sq.mm
240 to 400 sq.mm
12.4 CABLE CLAMPS
Description
Excise duty at 12.36% and VAT at 5% are extra
95 to 240 sq.mm
240 to 400 sq.mm
1.For every 3 metre length one set of clamp is to be provided
2.Suitable number of clamps are to be arrived at according to the length
3.Provision for cable trench and delivery pipe ducting are to be provided in
pump house detailed estimate.
12.5 H.T. CABLE
PVC INSULATED ARMOURED ALUMINIUM CONDUCTOR CABLE
Sl.No. Description Unit
Rate for 2013-14
in Rupees
-
8/13/2019 04_ Rate for Pumpsets
24/41
-
8/13/2019 04_ Rate for Pumpsets
25/41
Sl.
No.Description Unit
Rate for 2013-14
in Rupees
1 Rate for 5 HP Model/ Rotary type Vaccumpumpsets (Pumpset + GI Pipes + Fittings +
Starters + Valves + 100 Lr.Tank) including
Transportation, handling charges all taxes and
duties
1 No 212129.00
2 Rate for 10 HP Vaccum pumpset with all above
Accessories 1 No 242077.00
3 150mm dia Pressure Gauge and Vaccum guage
including all accessories as per specification
(For Suction and Delivery to be mounted on
wall on Teak Wood Board)
1 No 3744.00
3POLE 4 POLE
1 32-100 8857.00 11000.00
2 125 10500.00 13000.00
3 160 13000.00 17424.00
4 200 23553.00 24684.00
5 250 23553.00 28314.00
6 320 28500.00 33000.00
7 400 30000.00 34500.00
8 630 33188.00 40000.00
9 800 45000.00 59968.00
10 1000 70000.00 90000.00
11 1250 79000.00 115000.00
12 1600 90000.00 145000.00
NOTE:
13.0 VACCUM PUMP SET WITH ACCESSORIES
14.0 MOULDED CASE CIRCUIT BREAKER(MCCB)
Sl.N
o.Range
Rate for 2013-14 in Rupees
1) The rates are inclusive of all taxes, duties and handling charges and F.O.R. destination.
2) The rate for MCB for single phase useage the PWD schedule of rates shall be referred.
3) Add 35% cost of MCCB/ACB/ MCB towards the cost of fabrication other fittings and labour
4) Upto 15 KW distribution box shall be used for more than one outgoing loads and for rates PWD
schedule rates shall be referred.
-
8/13/2019 04_ Rate for Pumpsets
26/41
Sl.N
o.Description Unit
Rate for 2013-14 in
Rupees
1 Up to 50HP/37 KW (which includes LT meter
panel board 6 Nos. suitable fuse carriers 1 No. 18750.00
2 75 HP/56 KW (which includes LT meter
panel board 6 Nos. suitable fuse carriers 1 No. 24470.00
3 75HP-150HP/56-112 KW (which includes LTmeter panel board 6 Nos. suitable fuse carriers 1 No. 30580.00
4 IN HT supply using LT metering board (Above
150 HP below 200 HP) 112-150 KW 1 No. 50000.00
Note:
a. The rate for mixed Die Electric Capacitor with Test Certificate given as Rs.400/- per KVAR is
inclusive of all taxes and duties and inclusive of Banking charges, such as providing of copper bus
bars with provision for adding atleast 2 capacitors at later date, cable entry box, fabricating charges
etc. complete. This rate is not applicable for replacement of capacitors which do not require banking
and fabrication works.
16.0 LT METERING BOX
15.0 RATE FOR MIXED DIE ELECTRIC CAPACITOR WITH TNEB TEST CERTIFICATE
WITH ACCESSORIES INCLUDING BANKING CONFORM TO IS 2834.
Rs.400/-per KVAR(including all taxes, duties and handling charges).
-
8/13/2019 04_ Rate for Pumpsets
27/41
Sl.No. Description UnitRate for 2013-14 in
Rupees
1
Designing and preparation of CEIG drawings,
obtaining Approval and safety certificate
including submission of Completion report and
rectification report.
1 No. 50000.00
2
Supply, delivery of 6 pole structure materials
with suitable Size RSJ along with all structure
material are as under.
a For 11 KV Sub station 1 No. 250000.00
b For 22 KV Sub station 1 No. 350000.00
3 Construction of transformer plinth 1 No. 17480.00
4Chain link fencing with gate including theTNEB 2 poles Spreading of materials as per
CEIG requirements1 No. 45000.00
5 Transformer yard earthing
a Upto 250 KVA Transformer sub station 1 No. 25000.00
b Above 250 KVA 1 No. 50000.00
6 Transformer sub station erection charges 1 No. 15890.00
Note:
3POLE 4 POLE
1 1000 138500.00 170400.00
2 1250 146700.00 179700.00
3 1600 162800.00 209400.00
4 2000 203500.00 246400.00
5 2500 245600.00 300300.00
6 3200 311200.00 384100.00
7 4000 385300.00 473000.00
8
Note:
17.0 TRANSFORMER SUB STATION RELATED WORKS
Provision for cement concrete flooring has to be made at the sub astation yard
17.1 AIR CIRCUIT BREAKER (ACB)
Sl.No. Range in AMPSRate for 2013-14 in Rupees
The rates are inclusive of all taxes, duties, handling charges and F.O.R. destination.
-
8/13/2019 04_ Rate for Pumpsets
28/41
Sl.No. Description UnitRate for 2013-14 in
Rupees
1Electrical gloves tested to 11 KV /22 KV withwooden box dusted with french chalk powder 1 No. 410.00
2 Electrical quality 6mm thick rubber mat 1 No. 590.00
35 kg capacity ISI marked Dry chemical powder
fire extinguisher 1 No. 1650.00
4Fire Bucket-3 Nos Hooked to MS stand
1 No. 660.00
5 Laminated shock treatment chart 1 No. 500.00
6 Wooden First Aid Box 1 No. 650.00
7Rechargeable Emergency lamp( 600mm
fluorescent lamp) 1 No. 2750.00
H.T. SUPPLY
8 Wooden ladder 3M Ht. 1 No. 990.00
9 Earth Discharge Rod 1 No. 830.00
Note:
18.0 SAFETY APPLIANCES
The rates are inclusive of all taxes,duties, handling charges and F.O.R destination
-
8/13/2019 04_ Rate for Pumpsets
29/41
Sl.No. Description UnitRate for 2013-14 in
Rupees
1 6 Chain wrench best India make 1 No. 500.00
2 8Chain Wrench Best India Make 1 No. 700.00
3 Connector Screw Driver 901 Taparia Make 1 No. 41.00
4 200mm Screw Driver 825 Taparia Make 1 No. 70.00
5 300mm Screw Driver 829 Taparia Make 1 No. 137.00
6 400mm Screw Driver 930 Taparia Make 1 No. 198.00
7 200mm Cutting Plier Taparia Make 1 No. 250.00
8800gm Ball Pane Hammer with Handle
Taparia Make1 No. 300.00
9 Digital Tong Tester CE Make 1 No. 3000.00
10 Digital Multi Meter CE Make 1 No. 1750.00
11 15 Screw Spanner Taparia Make 1 No. 600.00
12 12 Bearing Puller 1 No. 594.00
13 Lever Type Grease Gun 1 No. 487.00
14 12Screw Spanner 1 No. 422.00
15 Crow Bar 5 1 No. 430.00
16 1 Cold Chisel 1 No. 144.00
17 Hacksaw Frame with Blade 1 No. 90.00
18 Electrical Air Blower 1 No. 2500.0019 Digital Tachometer 1 No. 1500.00
20 Hand Crimpling Tool 8 1 No. 372.00
21 DE Spanner set 6 to 32 Jhalani Make 1 No. 750.00
22 Rings spanner set 6 to 32 Jhalani Make 1 No. 1798.00
23 Pipe Wrench 24 Jhalani Make 1 No. 1080.00
24 Pipe Wrench 14 Jhalani Make 1 No. 450.00
25 12 Flat rough File Scissors Make 1 No. 242.00
26 12 Flat smooth File Scissors Make 1 No. 372.00
27 12Round File Rough Scissors 1 No. 317.00
28 12 Round File Smooth Scissors Make 1 No. 350.00
29 12Half Round File Rough Scissors Make 1 No. 540.00
30 12Half Round File Smooth Scissors Make 1 No. 540.00
Note:
19.0 TOOLS
The rates are inclusive of all taxes,duties, handling charges and F.O.R destination
-
8/13/2019 04_ Rate for Pumpsets
30/41
Sl.No. Description UnitRate for 2013-14 in
Rupees
1
Providing lighting wiring using MS conduit
pipes and specials with 2 runs 1.5 sq.mm PVC
copper wire and 1 run 12 swg GI wire for
earthing for light, fans and 5A plug points
including switch box 5A switch sockets ceiling
rose and consumables
1 No. 750.00
2
Supply of portable hand lamp with 100w bulb,
lamp guard and wooden handle and 25M long
flexible cable.
1 No. 830.00
3 Supply of pedestal fan 1 No. 2860.00
Note:
Sl.No. Description UnitRate for 2013-14 in
Rupees
1 Upto 25 HP installation 1 No. 1500.00
2 Above 25-60 HP 1 No. 2000.00
3 Above 60-150 HP 1 No. 3000.00
4 Above 150 HP 1 No. 5000.00
Note:
20.0 PUMP ROOM WIRING AND OTHER ITEMS
1)Add 35% for wiring on the total fittings cost.
2)The above rates are inclusive of all taxes duties handling charges and F.O.R destination.
3)Excise duty at 12.36% VAT 5%.
21.0 TWIN GI EARTHING
In case of collector well the collctor well distance from the bank of the rivr should be
ascertained to find out the weight of GI strip to be usd only in the foot bridge and rate
rate of Rs.47/- per Kg should be adopted for estimation and this amount should be addedwith the above rates.
-
8/13/2019 04_ Rate for Pumpsets
31/41
Sl.No. Description UnitRate for 2013-14 in
Rupees
1 2T capacity hand operated over headTravelling (HOT) crane suitable for a span
upto 6 Mtrs, and travel length upto 10 Mtrs.
with clear lift upto 6 Mtrs. including gear type
chain pulley block and geared Travelling trolley
complete with all accessories.
1 No. 302570.00
2 2T HOT crane with above specifications upto 8
M Span 1 No. 312380.00
3 2T HOT crane with above specifications upto
10 M Span 1 No. 333640.00
4 3T capacity hand operated over head
Travelling (HOT) crane suitable for a span
upto 6 Mtrs, and travel length upto 10 Mtrs.
with clear lift upto 6 M including gear type
chain pulley block and geared Travelling trolley
complete with all accessories.
1 No. 325470.00
5 3T HOT crane with above specifications upto 8
M Span 1 No. 335280.00
6 3T HOT crane with above specifications upto10 M Span 1 No. 348360.00
7 5T capacity hand operated over head
Travelling (HOT) crane suitable for a span
upto 6 Mtrs, and travel length upto 10 M with
clear lift upto 6 M including gear type chain
pulley block and geared Travelling trolley
complete with all accessories.
1 No. 420320.00
8 5T HOT crane with above specifications upto 8
M Span 1 No. 449760.00
9 5T HOT crane with above specifications upto
1M Span 1 No. 479200.00
Note:
22.0 H.O.T. CRANE AND ACCESSORIES
The rates are inclusive of all taxes,duties, handling charges.
-
8/13/2019 04_ Rate for Pumpsets
32/41
25 30 35 40 45 50 55 60 70 80 90
1 1500 31 31 31 31 31
2 2500 37 37 37 38 39
3 3000 39 39 39 39 39
4 3500 39 39 39 39 40 44 44 44
5 4000 39 39 42 42 44 44 44 446 5000 40 44 44 44 44 54 54 54
7 6000 44 44 44 54 54 54 59 59
8 7000 54 59 68 68 72 72 72 72 72 72
9 8000 72 72 72 79 79 79 79 79 79
10 9000 79 79 87 87 87 87 87 87 87
11 10000 87 91 91 91 91 91 91 91 91
12 15000 104 110 110 110 110 110 110 110 110 137 137
13 20000 129 137 137 137 137 137 137 137 137 158 15814 25000 137 158 158 159 159 159 159 159 159 168 168
15 30000 158 158 161 161 168 168 168 168 168 188 188
Note: The rates for testing and repairs, if any required, for pump sets will be extra.
23.0 CARRYING ENERGY EFFICIANCY IMPROVEMENT JOB BY
APPLICATION OF GLASS FLAK COATING FOR HORIZANDAL
SPLIT CASE PUMPS
Rupees in Thousands
Sl.NoCapacity
in LPM
Rate for 2013-14 in Rupees
HEAD IN METRES
-
8/13/2019 04_ Rate for Pumpsets
33/41
10 15
1 400 40000 40000
2 500 40000 40000
3 600 43000 43000
4 700 45000 45000
5 800 47000 47000
6 900 47000 47000
7 1000 57000 57000
8 1100 57000 57000
9 1200 77000 77000
10 1300 77000 77000
11 1400 98000 98000
12 1500 98000 98000
Note:The rates for testing and repairs, if any required, for pump sets will be extra.
23.1 CARRYING ENERGY EFFICIENCY IMPROVEMENT JOB BY
APPLICATION OF GLASS FLAK COATING FOR MIXED
FLOW PUMPS
Sl.No Capacity in Cum/Hr.
Rate for 2013-14 in Rupees
Head in meters
-
8/13/2019 04_ Rate for Pumpsets
34/41
15 20 25 30 35 40 45 50 55 60 70 80 90
1 2500 60000 59300 84050 93900 108750 108600
2 3000 60000 59300 84050 108750 123600 178050
3 3500 60000 59300 84050 118650 133500 182950
4 4000 64000 63260 89000 126570 148350 192850
5 5000 64000 63260 89000 126570 148350 192850
6 6000 70000 69200 93900 133500 158250 202750
7 7000 79000 78110 103800 138450 168150 212650
8 8000 88000 86970 113700 148350 178050 222550
9 9000 88000 86970 113700 148350 178050 222550
10 10000 99000 97860 118650 158250 182950 232450
11 15000 109000 107760 133500 168150 192850 242350
12 20000 120000 118650 143400 178050 202750 252550
13 25000 130000 128550 158250 182950 212650 262150
14 30000 140000 138450 168150 192850 222550 272050
Note: The rates for testing and repairs, if any required, for pump sets will be extra.
23.2 CARRYING ENERGY EFFICIANCY IMPROVEMENT JOB BY
APPLICATION OF GLASS FLAK COATING FOR VERTICAL
TURBINE PUMPS
Sl.No Capacityin LPM
Rate for 2013-14 in Rupees
HEAD IN METERS
-
8/13/2019 04_ Rate for Pumpsets
35/41
-
8/13/2019 04_ Rate for Pumpsets
36/41
-
8/13/2019 04_ Rate for Pumpsets
37/41
-
8/13/2019 04_ Rate for Pumpsets
38/41
-
8/13/2019 04_ Rate for Pumpsets
39/41
-
8/13/2019 04_ Rate for Pumpsets
40/41
-
8/13/2019 04_ Rate for Pumpsets
41/41