04 mech - bs publications

BS PublicationsBSP Aeronautical Engineering / Mechanical Engineering / Metallurgy

BSP Books Pvt. Ltd. Phone : 23445688, 23445605 Fax : 91+40-23445611 e-mail : [email protected] 1

Visit: ww

w.bspbooks.net / w

ww

.bspublications.net for latest updates

AERONAUTICAL ENGINEERING

Bramwell’s HelicopterDynamics, 2nd Ed.A. R. S. Bramwell, George Done andDavid BalmfordContents: 1. Basic Mechanics of rotor systems andhelicopter flight 2. Rotor aerodynamics in axial flight3. Rotor aerodynamics and dynamics in forward flight4. Trim and performance in axial and forward flight

5. Flight dynamics and control 6. Rotor aerodynamics in forward flight7. Structural dynamics of elastic blades 8. Rotor induced vibration 9. Aeroelastic and aero mechanical behaviour

Rpt. 2013 |9789382291305 | 373 pp | BSPELS | PB | Rs. 1295.00

Recent Advances inDesign, Development &Operation of Micro AirVehiclesG. K. Viswanadh and M. V. S. S. GiridharContents: 1. Sensors and Avionics 2. Guidance,Navigation and Control 3. MAV Applications 4. Modelling

and Stimulations and Fuselage and Propulsion Systems 5. SystemsEngineering and Legal Aspects of MAV Flying

2013 | 9788178002811 | 623 pp | BSPBSP | PB | Rs. 1795.00

Aviation MeteorologyNavale PandharinathContents: 1. The Sun 2. The Motion of the Earth3. The Atmosphere 4. Atmospheric Pressure 5. Altimetry6. Density and Density Altitude 7. Water in theAtmosphere 8. Temperatures, Laps Rates and Stabilityof Atmosphere 9. Atmospheric Aerosols andTurbulence 10. Cloud Classification 11. Meteors, CloudFormation and Dissipation 12. Precipitation Processes

13. Thunderstorms 14. Aviation Hazards Associated with Thunderstorms15. Radar and its Application in Weather Detection 16. Hailstorms17. Tornadoes, Waterspouts, Dust Devils 18. Ice Accretion on Aircraft19. Visibility and Fog 20. The Surface Wind 21. Divergence, Vortical Motionand Vorticity 22. Wind Shear, Clear Air-Turbulence and Jet Streams 23. AirMasses and Fronts 24. Tropical Meteorology 25. Tropical Cyclone26. Monsoons 27. The General Circulation of the Atmosphere28. Climatolgy 29. Climate of India 30. Western Disturbances and SummerThunderstorm over India 31. General Aviation Services 32. MeteorologicalServices for International Air Navigation 33. World Area Forecast System(WAFS) 34. Meteorological Observations 35. Satellite Meteorology36. Climatology for Aviators 37. Aviation Weather Reports and Codes38. Aviation Weather Forecasts and Codes 39. SIGMET and AIRMETInformation and Aerodrome Warnings 40. Meteorology for HelicopterOperations

2012 | 9789381075807 | 943 pp | BSPBSP | PB | Rs. 895.00

Aircraft StructuresG. Lakshmi Narasaiah

Contents: 1. Introduction Part - I Basics of StructuralAnalysis 2. Mechanical Properties of Materials3. Properties of Sections 4. Mechanics of Rigid Bodies5. Energy Principles 6. Analysis of Trusses 7. Analysisof Continuum Structures Part II - Design and Analysis

of Aeroplane Structures 8. Design Aspects of Aeroplane Structure9. Basics of Aerodynamics 10. Loads on Aeroplane Structure 11. Analysisof Determinate and Indeterminate Beams 12. Analysis of Shafts 13. Bucklingof Columns 14. Bending and Buckling of Thin Plates 15. Shear Flow, ShearCenter and Shear Lag 16. Analysis of Aeroplane Fuselage and Wing17. Fatigue Analysis Part - III Other Relevant Topics 18. Materials ofAeroplane Construction 19. Finite Element Method 20. Aeroelasticity

2010 | 9788178002507 | 425 pp | BSPBSP | PB | Rs. 350.00

Rocket PropulsionElements, 7th Ed.George P. Sutton and Oscar Biblarz

Contents: 1. Classification 2. Definitions andFundamentals 3. Nozzle Theory and ThermodynamicPerformance relations 4. Flight Performance 5. ChemicalRocket Propellant Analysis 6. Liquid Propellant Rocket

Engine fundamentals 7. Liquid Propellants 8. Thrust Chambers 9. Combustionof Liquid Propellants 10. Turbopumps, Engine Design Engine control,calibration, Integration, and Optimization 11. Solid Propellant RocketFundamentals 12. Solid Propellants 13. Combustion of Solid Propellants14. Solid Rocket Components and Motor Design 15. Hybrid Propellant Rockets16. Thrust Vector Control 17. Selection of Rocket Propulsion Systems18. Rocket Exhaust Plumes 19. Electric Propulsion 20. Rocket Testing

Rpt. 2016 | 9788126525775 | 751 pp | BSPJW | PB | * Rs. 1795.00

JULY2017

Aeronautical Engineering Composite Materials Drawing / Mechanical Robotics Thermal Engineering Energy Sources FEM/ Computational Methods Fluid Mechanics Management Industrial Engineering

Automobile Engineering MEMS Mechanical Engineering Machine Design Instrumentation Material Science / Metallurgy/ Testing Engineering Mechanics Production / Operation Tribology General

Optimal Control TheoryAn IntroductionDonald E. KirkContents: Part – I: Describing the System andEvaluating Its Performance 1. Introduction 2. ThePerformance Measure Part – II: DynamicProgramming 3. Dynamic Programming Part – III: The

Calculus of Variations and Pontryagins Minimum Principle 4. TheCalculus of Variations 5. The Variational Approach to Optimal ControlProblems Part – IV: Iterative Numerical Techniques for FindingOptimal Controls and Trajectories 6. Numerical Determination of OptimalTrajectories Part – V: Conclusion 7. Summation

Rpt. 2016 | 9780486324326 |480 pp | BSPDOV | PB | Rs. 995.00


BSP Books Pvt. Ltd. Phone : 23445688, 23445605 Fax : 91+40-23445611 e-mail : [email protected]

Vis

it: w

ww

.bsp

book

s.ne

t / w

ww

.bsp

ublic

atio

ns.n

et fo

r lat

est u

pdat

es

Mechanics ofComposite Materials, 2nd Ed.Robert M. JonesContents: 1. Introduction to Composite Materials2. Macromechanical Behavior of a Lamina 3. Micro-mechanical Behavior of a Lamina 4. MacromechanicalBehavior of a Laminate 5. Bending, Buckling and Vibrationof Laminated Plates 6. Other Analysis and Behavior

Topics 7. Introduction to Design of Composite Structures

Rpt. 2016 | 9781138198012 | 519 pp | BSPT&F |PB |* Rs. 1095.00

THERMAL ENGINEERING

Thermodynamics forEngineers, 2nd Ed.Kaufui Vincent WongContents: 1. Concepts, Definitions, and the Laws ofThermodynamics 2. Properties of Pure Substances3. Mass Conservation and the First Law ofThermodynamics 4. Second Law of Thermodynamicsand Entropy 5. Energy (Availability) Analysis 6. VaporPower Systems 7.Thermodynamic Property Relations

8. Principles of Energy (Heat) Transfer.

Rpt. 2013 | 9781439845592 |450 pp | BSPT&F | PB |* Rs. 995.00

Robot Analysis & ControlHaruhiko Asada and Jean-Jacques E. SlotineContents: 1. Introduction, 2. Kinematics I: Geometry,3. Kinematics II: Differential Motion, 4. Statics5. Dynamics, 6. Trajectory Control, 7. Complaint MotionControl

Rpt. 2013 | 9788126541133 | 266 ppBSPJW | PB | Rs. 795.00

DRAWING / MECHANICAL

The IndustrialInformation TechnologyHandbookRichard Zurawski

Rpt. 2014 | 9780849319853| 1936 ppBSPCRC | HB | Rs. 6000.00

A Textbook ofEngineering GraphicsD. A. HindoliyaContents: 1. Introduction 2. Scales 3. Conic Sections4. Engineering Curves 5. Orthographic Projections6. Projections of Points 7. Projections of Straight Lines8. Projections of Planes 9. Projections of Solids10. Sections of Solids and Intersection of Cylinders11. Development of Surfaces 12. Isometric Projections

13. Introduction to Computer Aided Drafting

2014 | 9789383635214 | 564 pp | BSPBSP | PB | Rs. 625.00

ROBOTICS

ENERGY SOURCES

Geometric Modeling, 3rd Ed.Michael E. MortensonContents: 1. Introduction 2. Curves 3. Hermite curves,4. Bezier Curves 5. B-Spline Curves 6. Surfaces,7. Bicubic Hermite surfaces 8. Bezier Surfaces9. B-Spline Surfaces, 10. Solids, 11. Complex ModelConstruction, 12. Geometric Properties

Rpt. 2013 | 9781259064937 | 505 ppBSPMGH | PB | Rs. 1095.00

Composite MaterialsScience and Engineering, 3rd Ed.Krishnan K. ChawlaContents: Part – I 1. Introsuction, 2. Reinforcements,3. Matrix Materials, 4. Interfaces, Part – II 5. PolymerMatrix Composites, 6. Metal Matrix Composites,7. Ceramic Matrix Composites, 8. Carbon Fiber/CarbonMatrix Composites, 9. Multif i lamentarySuperconducting Composites, Part – III

10. Micromechanics of Composites, 11. Macromechanics of Composites,12. Monotonic Strength and Fracture, 13. Fatigue and Creep, 14. Designingwith Composites, 15. Nonconventional Composites.

Rpt. 2015 | 9788132233442 | 566 PP | BSPSPR | PB |* Rs. 1495.00

Energy ManagementHandbook, 8th Ed.Steve Doty, Wayne C. TurnerContents: 1. Introduction 2. Effective EnergyManagement 3. Energy Auditing 3. Economic Analysis4. Boilers and Fired Systems 5. Steam andCondensate Systems 6. Cogeneration 7. Waste-Heat Recovery 8. Building Envelope 9. HVAC Systems10. Motors, Drives & Electric Energy Management

11. Energy Management Control Systems 12. Lighting 13. Energy SystemsMaintenance 14. Industrial Insulation 15. Use of Alternative Energy16. Indoor Air Quality 17. Electric & Gas Utility Rates for Commercial &Industrial Consumers 18. Thermal Energy Storage 19. Natural GasPurchasing 20. Control Systems 21. Sustainability & High PerformanceGreen Buildings 22. Electric Deregulation 23. Financing and PerformanceContracting 24. Commissioning 25. Measurement & Verification of EnergySavings

Rpt. 2017 | 950 pp | BSPT&F | HB | Rs. 3495.00

NEW

Textbook ofEngineering Drawing, 4th Ed.(as per BIS:SP46:2003) with AutoCAD

K. Venkata Reddy

Rpt. 2017 | 9788178002088 | 483 ppBSPBSP | PB | Rs. 395.00

DRAWING / MECHANICALCOMPOSITE MATERIALS

Principles of CompositeMaterial Mechanics4th Ed.Ronald F. GibsonContents: 1. Introduction 2. Lamina Stress–StrainRelationships 3. Effective Moduli of a Continuous Fiber-Reinforced Lamina 4. Strength of a Continuous Fiber-Reinforced Lamina 5. Analysis of Lamina HygrothermalBehavior 6. Analysis of a Discontinuously Reinforced

Lamina 7. Analysis of Laminates 8. Analysis of Viscoelastic and DynamicBehavior 9. Analysis of Fracture 10. Mechanical Testing of Composites andtheir Constituents 11. Answers to Selected Problems

Rpt. 2017 |9781498720694 | 698 pp | BSPT&F | HB | Rs. 1295.00

NEW



Visit: ww

w.bspbooks.net / w

ww


Renewable EnergyResources, 3rd Ed.John Twidell and Tony WeirContents: 1. Principles of Renewable Energy, 2. SolarRadiation and the Greenhouse Effect, 3. Solar WaterHeating, 4. Other Solar Thermal Applications,5. Photovoltaic Power Technology – PV, 6. Hydropower,

7. Wind Resource, 8. Wind Power Technology, 9. Biomass Resources fromPhotosynthesis 10. Bioenergy Technologies, 11. Wave Power, 12. Tidal-current and Tidal-range Power, 13. Ocean Gradient Energy: OTEC andOsmotic Power, 14. Geothermal Energy, 15. Energy Systems: Integration,Distribution and Storage, 16. Using Energy Efficiently, 17. Institutional andEconomic Factors.

Rpt. 2016 | 9780415584388 | 816 pp| BSPT&F |PB |* Rs. 1695.00

Energy Resources,Utilization andTechnologiesAnjaneyulu Yerramilli and Francis TuluriContents: 1. Introduction – Energy FundamentalConcepts, Sources and Utilization 2. Solar Energy3. Biomass Energy 4. Wind Energy 5. Ocean Energy

6. Geothermal Energy 7. Hydrogen Energy 8. Fuel Cells 9. Nuclear Energy10. Application of Nanotechnologies for Clean Energy

Rpt. 2017 | 9789381075890| 549 pp | BSPBSP| PB |* Rs. 750.00

Energy Resources:Conventional &Non-Conventional, 2nd Ed.M. V. R. Koteswara Rao

Rpt. 2017 | 9788178001241 | 232 ppBSPBSP | HB | * Rs. 550.00

ENERGY SOURCES

Science & Technology ofPhotovoltaics, 2nd Ed.Jayarama Reddy P.

Contents : 1. Fundamentals of Solar Cells 2. Solar CellTechnologies 3. Solar Modules & Arrays 4. SolarPhotovoltaic Systems 5. Storage Batteries 6. PowerConditioning Equipment 7. Design, Installation and

Operation of a Solar PV System 8. Building Integrated Photovoltaics9. Energy Analysis and Environmental Issues 10. Market for Photovoltaics

2012 | 9789381075913 | 334 pp | BSPBSP | PB | Rs. 695.00

Energy ManagementW. R. Murphy and G. Mckay

Rpt. 2016 | 9788131207383 | 374 ppBSPELS | PB | * Rs.850.00

Proceedings of InternationalConference onComputational Methods inEngineering and SciencesP. Ravinder Reddy, M. V. S. Murali Krishnaand N. V. Srinivasulu

2009 | 9788178001890 | 894 ppBSPBSP | HB | Rs. 2495.00

FEM / COMPUTATIONAL METHODS

Applied FiniteElement Analysis,2nd Ed.Larry J. SegerlindContents: 1. Introduction 2. One-dimenstional LinearElement 3. A Finite Element Example 4. ElementMatrices: Galerkin Formulation 5. Two-Dimensional

Elements 6. Coordinate Systems Part II Field Problems 7. Two-dimensionalField Equation 8. Torsion of Noncircular Sections 9. Derovatove BoundaryConditions: Point Sources and Sinks 10. Irrotational Flow 11. Heat Transferby Conduction and Convection 12. Acoustical Vibrations 13. AxisymmetricField Problems 14. Time-Dependant Field Problems: TheoreticalConsiderations 15. Time-Dependant Field Problems: Practical Considerations16. Computer Program for Two-Dimensional Field Problems Part III -Structural and Solid Mechanics 17. The Axial Force Member 18. ElementMatrices: Potential Energy Formulations 19. The Truss Element 20. A BeamElement 21. A Plane Frame Element 22. Theory of Esasticity 23. Two-Dimensional Elasticity 24. Axisymmetric Elasticity 25. Computer Programsfor Structural and Solid Mechanics Part IV - Linear and Quadratic Elements26. Element Shape Functions 27. Element Matrices 28. IsoparametricComputer Programs

Rpt. 2017 |9788126528806 | 427 pp |BSPJW | PB | * Rs. 1395.00

Finite Element Analysis:for Students & PracticingEngineersG. Lakshmi Narasaiah

2008 | 9788178001395 | 340 ppBSPBSP | PB | Rs. 275.00

Basic Fluid Mechanics andHydraulic MachinesZoeb Husain et. al.

2008 | 9788178001470 | 234 ppBSPBSP | PB | Rs. 200.00

FLUID MECHANICS

The Handbook of FluidDynamicsRichard W. Johnson

Rpt. 2014 | 9780849325090 | 1952 ppBSPCRC | HB | Rs. 7000.00



Vis

it: w

ww

.bsp

book

s.ne

t / w

ww

.bsp

ublic

atio

ns.n

et fo

r lat

est u

pdat

es

QUALITY MANAGEMENT

Total QualityManagement –An Integrated ApproachD. R. KiranContents: 1. TQM – An Overview 2. Evolution ofTQM 3. Quality Gurus 4. Leadership and TQM

5. Scientific Management 6. System Approach to Management Theory7. Strategic Planning 8. Cost of Quality 9. Organisation for TQM 10. CustomerSatisfaction 11. Total Employee Involvement 12. Supplier Partnership13. Total Productive Maintenance 14. Quality Awards 15. Quality Circles16. Fundamentals of Statistics – Part I 17. Fundamentals of Statistics –Part II 18. Process Capability 19. Inward Inspection 20. Seven TraditionalTools of TQM 21. The Seven Modern Tools of TQM 22. Kaizen andContinuous Improvement 23. 5 S 24. Six Sigma 25. Terminology used inJapanese Management Practices 26. Failure Modes and Effects Analysis27. Reliability Engineering 28. Business Process Reengineering29. Benchmarking 30. Quality Function Deployment 31. Quality LossFunction 32. Design for Quality 33. Value Engineering 34. ISO 9000 QualitySystems 35. ISO 14000 Quality Systems

2016 | 9789352300921 | 618 pp | BSPBSP | PB | Rs. 650.00

NEW

INDUSTRIAL ENGINEERING

MaintenanceEngineering &Management:Precepts and Practices, 2nd Ed.D. R. KiranContents: 1. Introduction 2. Principles of Maintenance

Planning 3. Categories of Maintenance 4. Reliability and Machine Availability5. Preventive Maintenance 6. Condition Monitoring 7. Logical Fault Location8. Wear Debris Analysis 9. Reliability Based Maintenance 10. Lubrication11. Cutting Fluids 12. Maintenance Costs 13. Failure Modes and EffectsAnalysis 14. Lean Maintenance 15. Scientific Inventory Management16. Spare Part Inventory Control 17. Total Productive Maintenance18. System Approach to Management Theory 19. Organisation forMaintenance 20. Equipment Record 21. Work Order Systems22. Computerised Maintenance Management System 23. Replacement ofMachinery and Equipment 24. Environmental Issues 25. Industrial Safety26. Job Hazard Analysis

2017 | 9789352301621 | 418 pp | BSPBSP | PB | Rs. 350.00

Quality : A CriticalIntroduction, 3rd Ed.Beckfordg John. L. W

Contents: 1. The Quality Imperative 2. Quality: AStrategic Decision? 3. Barriers to Quality 4. TheEmergence of Management Part Two: The QualityGurus User Guide 5. Philip B. Crosby 6. W. Edwards

Deming 7. Armand V. Feigenbaum 8. Kaoru Ishikawa 9. Joseph M. Juran10. John S. Oakland 11. Taiichi Ohno 12. Shigeo Shingo 13. Genichi TaguchiPart Three: Contemporary Thinking User Guide 14. Contingency Theory15. Organisations as Systems 16. Organisational Cybernetics 17. SoftSystems Thinking 18. Critical Systems Thinking 19. Business Process Re-engineering 20. Organisational Learning 21. Systemic Quality ManagementPart Four: Methods, Tools & Techniques User Guide 22. SB Foods: AQuality Problem? 23. First Intervention 24. Second Intervention 25. FinalIntervention

2011 | 9780415996358 | 328 pp | BSPT&F | PB | * Rs. 695.00

NEW

Hydraulic Machines:Fundamentals of HydraulicPower SystemsP. Kumar

Contents: 1. Basic Fluid Mechanics, 2. HydraulicTransmission of Power, 3. Fluids For Hydraulic

Systems, 4. Hydraulic Pumps, 5. Rotodynamic Pump, 6. HydraulicAccumulator, 7. Hydraulic Motors, 8. Rotodyne Transmission, 9. Turbines

2012 | 9788178002699 | 361 pp | BSPBSP | PB | Rs. 350.00

Multiphase FlowHandbookCrowe

Rpt. 2013 | 9780849312809 | 1156 ppBSPCRC | HB | Rs.5000.00

QUALITY MANAGEMENT

Total QualityManagement: Text, Cases& Readings, 3rd Ed.Joel E. Ross

Contents: 1. Introduction to Total QualityManagement, 2. Leadership, 3. Information andAnalysis, 4. Strategic Planning, 5. Human Resource

Focus, 6. Process Management, 7. Customer and Market Focus,8. Benchmarking, 9. Organizing for Total Quality Management, 10.Productivity, Quality, and Re-engineering, 11. The Cost of Quality, 12. ISO9000 and Universal Standards of Quality, 13. Theory of Constraints, 14.Varifilm Case Study

Rpt. 2015|9781574442663|550 pp|BSPT&F|PB|* Rs.1495.00

FLUID MECHANICS

The IndustrialInformation TechnologyHandbookRichard Zurawski


The IndustrialCommunicationTechnology HandbookRichard Zurawski

Rpt. 2013 | 9780849330773BSPCRC | HB | Rs. 5000.00



Visit: ww

w.bspbooks.net / w

ww


DesigningGreen Cement PlantsS. P. Deolalkar

Rpt. 2015 | 9788178003023 | 384 ppBSPBSP | HB | Rs. 3500.00

Nomograms for Designand Operation of CementPlantsS. P. Deolalkar

2011 | 9789381075005 | 249 ppBSPBSP | HB | Rs. 2500.00

Handbook for DesigningCement PlantsS. P. Deolalkar

Rpt. 2014 | 9788178002644 | 1295 ppBSPBSP | HB | Rs. 10,000.00


Flexible ManufacturingSystems in Practice, 2nd Ed.Joseph Talavage and Roger G. HannamContents: 1. Introduction 2. The Development ofManufacturing Systems 3. Flexible ManufacturingSystem-Their Development and Benefits 4. Pallets,Fixtures and Machines 5. Work-Handling and SystemLayouts 6. System Management and the DevelopingScene 7. Simulation and Analysis in the Design of

FMS 8. Simulation Modeling 9. Network-of-Queue Modeling 10. Network-of-Queue Analysis of a Deisgn Aid for FMS 11. Simulation for FMS Design12. Perscriptive Tools of FMS Design 13. Economic Justification of FMS 14.Artificial Intelligence in the Design of FMS

Rpt. 2013 | 9780824777180 | 358 pp | BSPT&F | PB |* Rs. 995.00


EngineeringMaintenance:A Modern ApproachB. S. DhillonContents1. Introduction 2. Maintenance Mathematics3. Maintenance Management and Control 4. PreventiveMaintenance 5. Corrective Maintenance 6. ReliabilityCentered Maintenance 7. Inventory Control In

Maintenance 8. Human Error In Maintenance 9. Quality and Safety inMaintenance 10. Maintenance Costing 11. Software Maintenance 12.Reliability, 13. Maintainability

Rpt. 2013 | 9781587161421 | 224 pp | BSPT&F | PB |* Rs. 795.00

Safety and Health inIndustry:A HandbookA. M. Sarma

Rpt. 2015 | 375 pp | 9788178001838BSPBSP | HB | Rs. 1495.00

MEMSRF MEMS: Theory, Design, & TechnologyGabriel M. RebeizContents: 1. Introduction: RF MEMS for MicrowaveApplications 2. Mechanical Modeling of MEMS Devices:Static Analysis 3. Mechanical Modeling of MEMS Devices:Dynamic Analysis 4. Electromagnetic Modeling of MEMSSwitches 5. MEMS Switch Library 6. MEMS SwitchFabrication and Packaging 7. MEMS Switch Reliabilityand Power Handling 8. Design of MEMS Switch Circuits

9. MEMS Phase Shifters 10. Distributed MEMS Phase Shifters and Switches11. MEMS Varactors and Tunable Oscillators 12. Micro machined Inductors13. Reconfigurable MEMS Networks, Filters, Antennas, and Subsystem14. Phase Noise Analysis of MEMS Circuits, Phase Shifters, and Oscillators15. Future Work in RF MEMS.

Rpt. 2010|9788126525805|483 pp|BSPJW|PB|*Rs. 1295.00

MEMS and NEMS:Systems, Devices, and StructuresSergey Edward LyshevskiContents: 1. Overview and Introduction 2. NewTrends in Engineering and Science: Micro- andNanoscale Systems 3. Fundamentals of MEMSFabrication 4. Devising and Synthesis of MEMS ANDNEMS 5. Modeling of Micro- and NanoscaleElectromechanical Systems, Devices, and Structures

6. Nanosystems, Quantum Mechanics, and Mathematical Models 7. Controlof Microelectromechanical Systems 8. Case Studies: Synthesis, Analysis,Fabrication, and Computer-Aided Design of MEMS

Rpt. 2010|9780849312625|461 pp|BSPT&F|PB|* Rs. 995.00

MECHANICAL ENGINEERING

Introduction toNano Science andTechnologiesAnjaneyulu YerramilliContents: 1. Nano Science & Technologies 2. CarbonNanotube Technologies (CNT) 3. Nano/Micro FabricationTechnologies 4. Micro Electro Mechanical Systems(MEMS) and Nano Electro Mechanical Systems

(NEMS) 5. Quality Control, Standards and Meteorology for Nano Technology6. Applications of Polymers/Organics, Liquid Crystals, Nano Compositesand Ferro Fluids in Nano Technology 7. Role of Surface and ColloidChemistry in Nano Technology, 8 Molecular Manufacturing, Future NanoTechnologies and Dexler Smalley Debate 9.Semiconductors, Nano SizeEffects and Moore’s Law 10. Quantum Computing 11. Quantum Dots, NanoPhotonics and their Applications 12. Thin Films 13. Nano Bio Info Cogno(NBIC) Convergent Technologies 14. Opportunities and Challenges in NewlyEmerging Nano Technologies and Strategies for their Utilization forSustainable Development 15. Laboratory Exercises.

2016 | 9789385433672 | 594 pp | BSPBSP | PB | Rs. 695.00

NEW

Rapid Prototyping:Principles and Applications3rd Ed.C. K. CHUA et.al

Contents: 1. Introduction 2. Rapid Prototyping ProcessChain 3. Liquid-Based Rapid Prototyping Systems

4. Solid- Rapid Prototyping Systems 5. Powder-Based Rapid PrototypingSystems 6. Rapid Prototyping Data Formats 7. Applications and Examples8. Medical and Bioengineering Applications 9. Evaluation and Benchmarking

Rpt. 2017|9789812778987 |539 pp|BSPST|PB| Rs. 1495.00

NEW



Vis

it: w

ww

.bsp

book

s.ne

t / w

ww

.bsp

ublic

atio

ns.n

et fo

r lat

est u

pdat

es

Basic MechanicalEngineering, 2nd Ed.A. R. Israni, P. K. Shah and N. C. NayakContents: 1. Introduction 2. Fuel and Combustion3. Properties of Gases 4. Properties of Steam 5. HeatEngines 6. Steam Boiler 7. Internal Combustion Engines8. Speed Control 9. Pumps 10. Air Compressors

11. Refrigeration and Air Conditioning 12. Production Processes13. Couplings, Clutches and Brakes 14. Power Transmission System15. Important Engineering Materials

2017 | 720 pp93| BSPBSP | PB | TBA

CRCHandbook ofEngineering TablesRichard C. Dorf


Fundamentals ofMechanical EngineeringAnil Kumar and K. Sudhakar

Contents: 1. Materials 2. Measurement 3. Fluids4. Themodynamics 5. Reciprocating Machines

2012 | 9789381075586 | 336 pp | BSPBSP | PB | Rs. 250.00

INSTRUMENTATION

InstrumentationOperation,Measurement,Scope andApplication of InstrumentsN. V. S. Raju

Contents: 1. Measurement Systems – An Overview and Basic Concepts,2. Characteristics of Instruments, 3. Inaccuracies in Instruments,4. Transducers and Measurement of Displacement, 5. Measurement ofTemperature, 6. Measurement of Pressure, 7. Flow Measurement,8. Measurement of Liquid Level, 9. Measurement of Speed, 10. Measurementof Vibration and Acceleration, 11. Measurement of Force, Torque andPower, 12. Rain and Stress Measurement, 13. Measurement of Viscosityand Surface Tension, 14. Measurement of Humidity/Dampness and Density/Specific Gravity, 15. Elements of Control Systems.

2016 | 9789352300891 | 600 pp | BSPBSP | PB | Rs. 750.00

NEW

GeometricDimensioning andTolerancingApplications and Techniques for use inDesign, Manufacturing and InspectionJames D. Meadows

Rpt. 2010 | 9781138049277| 603 pp | BSPT&F | PB |* Rs. 1695.00

Mechanical Design:Theory & MethodologyManjula B. Waldron andKenneth J. Waldron

Rpt. 2007| 9788181286024 | 387 ppBSPSPR | PB | * Rs. 995.00

TheEngineeringHandbook, 2nd Ed.Richard C. Dorf

Rpt. 2014 | 9780849315862 | 3080 ppHB | BSPCRC | Rs. 6000.00

MACHINE DESIGN

Design Data BookP. V. Ramana Murti and M. VidyasagarContents: 1. Sliding Contact Bearings 2. Rolling ContactBearings 3. IC Engine Parts 4. Power TransmissionSystems, Pulleys 5. Spur Gear Drives 6. Helical andBevel Gear Drives 7. Power Screws 8. Worm Gears9. Mechanical 10. Design of Curved beams 11. MachineTools Elements

Rpt. 2017| 9789383635757|122 pp|PB|BSPBSP|Rs. 125.00

NEW

MACHINE DESIGN

Advanced InternalCombustion EnginesK. Sudhakar and Anil KumarContents: 1. Internal Combustion Engine 2. InternalCombustion Engine System 3. IC Engine Testing andPerformance 4. Combustion in SI Engines 5. Combustion inCI Engines 6. Pollutant Formation and Control 7. Conventionaland Alternative Fuels 8. Recent Trends in IC Engines.

2014 | 9789383635061 | 226 pp | BSPBSP | PB | Rs. 350.00

MECHANICAL ENGINEERING

Fundamentals ofMachining Processes:Conventional andNonconventional Processes,2nd Ed.Hassan El-HofyContents: 1. Machining Processes 2. Cutting Tools3. Mechanics of Orthogonal Cutting 3. Tool Wear, Tool

Life, and Economics of Metal Cutting 4. Cutting Cylindrical Surfaces 5.Cutting Flat Surfaces 6. High Speed Machining 7. Machining by Abrasion 8.Abrasive Finishing Processes 9. Modern Abrasive Processes 10. Machiningby Electrochemical Erosion 11. Machining by Thermal Erosion 12. CombinedMachining Processes 13. Micromachining 14. Machinability 15. MachiningProcess Selection

Rpt. 2017 | 9781138569485 | 562 pp7| BSPT&F | PB | Rs. 895.00

NEW

NEW



Visit: ww

w.bspbooks.net / w

ww


Principles of Welding:Processes, Physics,Chemistry & MetallurgyRobert W. Messler, Jr.Contents: 1.The Process and Processes of Welding2. The Physics of Welding, 3. The Chemistry of Welding,4. The Metallurgy of Welding,

Rpt. 2015 | 9788126552627 | 662 pp | BSPJW | HB | Rs. 4495.00

MATERIAL SCIENCE / METALLURGY/ TESTING

Frontiers of Metallurgy &Materials TechnologyV. V. Kutumba RaoContents: 1. Microstructural Engineering andCharacterisation 2. Aerospace Materials 3. Compositeand Cellular Materials 4. Manufacturing Processes andIndustrial Practices 5. Powder Technology 6. Surface

Engineering 7. Welding Technology 8. Education, Environment andManagement 9. Metallurgical Heritage

2011 | 9789381075081 | 501 pp | HB | BSPBSP | Rs. 1995.00

Fuels, Furnaces,Refractories andPyrometry, 2nd Ed.A. V. K. Suryanarayana

2009 | 9788178001548 | 251 ppBSPBSP | PB | Rs. 225.00

Testing ofMetallic Materials, 2nd Ed.A. V. K. Suryanarayana

2007 | 9788178001340 | 276 ppBSPBSP | PB | * Rs. 325.00

Material Science andMetallurgyA. V. K. Suryanarayana

Contents: 1. Atomic Arrangements, 2. Diffusion,3.Tensile and Torsion Tests, 4. Plastic Deformation ofSingle Crystals, 5. Fracture Mechanism, 6. Creep,

7. Fatigue, 8. Solidification of Metals, 9. Solid Solutions, 10. Iron-CarbonEquilibrium, 11. Normalising, 12. Cast Irons, 13. Introduction of CompositeMaterials 14. Hardness

2013 | 9789381075876 | 273 pp | BSPBSP | PB | Rs. 250.00

Metallurgical Failure Analysis:TechniquesBalan K. P.Contents: 1. Introduction 2. Fracture 3. Tools and Techniques Used inFailure Analysis 4. Improper Material Selection 5. Manufacturing Defect6. Casting Defects 7. Overload 8. Fatigue 9. Corrosion Induced Failures10. Hydrogen Embrittlement and Stress Corrosion Cracking 11. Wear12. Elevated Temperature Failures

COMING SOON

Singer’sEngineeringMechanics Statics andDynamics, 3rd Ed. (SI Units)

SingerContents: Part - I Statics, 1. Introductory Concepts2. Resultants of Force System 3. Equilibrium of Force

Systems 4. Analysis of Structures, 5. Friction 6. Centroids and Centers ofGravity 7. Moments of Inertia 8. Special Topics Part - II Dynamics9. Kinematics of a Particle 10. General Principles of Dynamics 11. Kineticsof Particles 12. Kinematics of Rigid Bodies 13. Kinetics of Rigid Bodies14. Work-Energy Method 15. Impulse and Momentum 16. MechanicalVibrations

Rpt. 2017 | 9788178002194 | 824pp | BSPBSP | PB | Rs. 495.00

Handbook ofHard Coatings:Deposition Technologies,Properties and Applications

Rointan F. BunshahContents: 1. Introduction, 2. Vapor DepositionTechnologies, 3. Thermal Spraying and Detonation Gun

Processes, 4. Structure/Property Relationship for Hard Coatings,5. Characterization of Hard Coatings, 6. Macro- and Micromechanical andTribological Properties, 7. Applications to Cutting Tools, 8. Wear andCorrosion Resistant Hard Coatings for Non-Cutting Tool Applications,9. Cubic Boron Nitride and Diamond-Related Thin Films, 10. Summary,Developments, and Outlook.

Rpt. 2015 | 9789351072959 | 550 pp | BSPELS | HB | Rs. 4995.00

PRODUCTION / OPERATION

ENGINEERING MECHANICS

AdvancedStrength of Materials J. P. Den Hartog

1.Torsion 2. Rotating Disks 3. Membrane Stresses inShells 4. Bending of flat Plates 5. Beams on ElasticFoundation 6. Two-Dimensional Theory of Elasticity7. The Energy Method 8. Buckling 9. MiscellaneousTopics

Rpt. 2016 | 9780486324319 | 400 pp | BSPDOV | PB | Rs. 895.00

Operations Research:Theory & PracticeN. V. S. Raju

Contents: 1. Operations Research – An overview2. Formulation of Linear Programming Problems3. Graphical Solution of LPP 4. Simplex Method5. Transportation Problem 6. Assignment Problem

7. Inventory Management 8. Queue Models (Waiting Lines) 9. CompanionBooklet of Operations Research 10. Replacement Analysis 11. Game Theory12. Dynamic Programming

2017 |9789352301904 | 658 pp | BSPBSP | PB | Rs. 495.00

NEW



Vis

it: w

ww

.bsp

book

s.ne

t / w

ww

.bsp

ublic

atio

ns.n

et fo

r lat

est u

pdat

es Workshop PracticeManual, 6th Ed.K. Venkata Reddy

Rpt. 2017 | 9788178003078 | 252 ppBSPBSP | PB | * Rs. 195.00

Production TechnologyL. Krishna Reddy

Manufacturing ProcessesSantosh BhatnagarContents: Unit I - Basic Metals and Alloys: Propertiesand Applications 1. Properties of Materials 2. FerrousMaterials 3. Non-ferrous Metals and AlloysUnit II - Introduction to Metal Forming, CastingProcesses and its Applications 4. Metal Forming5. Casting Unit III - Introduction to Machining Welding

and Its Applications 6. Machining 7. Welding Unit IV - Manufacturing 8.Miscellaneous Topics 9. Non-Metallic Materials 10. Miscellaneous Processes

2011 | 9789381075012 | 135 pp | BSPBSP | PB | Rs. 125.00

PRODUCTION / OPERATION

IntroductoryOperations Research:Theory and ApplicationsH. S. Kasana and KumarContents: 1. Formulation 2. Geometry of LinearProgramming 3. The Simplex Algorithm 4. Duality Theory5. Advanced Linear Programming 6. SensitivityAnalysis 7. Transportation Problems 8. NetworkAnalysis 9. Project Management 10. SequencingProblems 11. Integer Programming 12. Dynamic

Programming 13. Nonlinear Programming 14. Search Techniques15. Geometric Programming 16. Goal Programming 17. Games Theory18. Special Topics

2011 | 9788181282828 | 581 pp | BSPSPR | PB | * Rs. 795.00

Research Methodology &Quantitative MethodsG. Nageswara raoContents: 1. Introduction, 2. Research Process, 3.Methods and Materials, 4. Sampling Methods, 5. ScaleConstruction Methods 6. Elementary Decision Theory,7. Collection of Data, 8. Data Organization, 9. Measures

of Central Tendency and Dispersion 10. Tests of Hypotheses, 11. Chi-square Distribution, 12. Correlation and Regression, 13. Analysis ofVariance 14. Time Series and Index Numbers, 15. Non-Parametric Tests,16. Elementary Queuing Theory, 17. Multivariate Statistical Methods18. Report Writing

Rpt. 2016|9789381075562|300 pp|BSPBSP|PB| Rs. 295.00

Fundamentals ofIntellectual Property forEngineersKompal Bansal and Parikshit Bansal

Contents: 1. Intellectual Property Rights and theirusefulness for Engineers, 2. Intellectual Property vs.Physical or conventional Property, 3. Usefulness of

Patents for Engineers, 4. Practical aspects of filing a Patent in India andAbroad, 5. Copyright and its usefulness in Engineering, 6. Practical aspectsof Copyright Registration and Transfer, 7. Industrial Design Registrationand its usefulness in Engineering, 8. Practical aspects of Industrial DesignRegistration in India and Abroad, 9. Trade Secrets- Importance forEngineers, 10. Trademarks- Importance in Engineering, 11. Trademarks-Importance in Engineering, 12. Legislations and Policy, 13. Digital Innovationsand Developments as Knowledge Assets, 14. IP Laws, Cyberlaws andDigital Content Protection 15. Practical Assignments

Rpt. 2015|9788178002774|468 pp|BSPBSP|PB| Rs. 325.00

GENERAL

TRIBOLOGY

Integral Approaches toTribo-testing inMechanical EngineeringH. PrashadContents: I - Tribology II - Lubricants III - Bearingunder Electric Current IV - Bio-tribology V - Tribologyin Engines VI - Films and Coatings VII - Polymers VIII

- Indentation, Scratch and Mapping IX - CMP-Chemico Mechanical ProcessingX - Cosmetics

2009 | 9788178001999 | 449 pp | BSPBSP | HB | Rs. 3995.00

Coatings Tribology:Properties, Mechanisma,techniques and Applications inSurface EngineeringKenneth Holmberg and Allan MatthewsContents: 1. Introduction 2. Deposition Processes and

Coating Structures 3. Tribology of Coatings 4. Tribological Properties ofCoatings 5. Coating Characterisation and Performance Evaluation 6. CoatingSelection 7. Applications

Rpt. 2015 |9789351072881 |560 pp | BSPELS | HB | Rs. 4495.00

Rpt. 2016 | 8178001268 | 269 ppBSPBSP | PB | * Rs. 250.00



Visit: ww

w.bspbooks.net / w

ww


MEC

H/1

5/02

/16/

2500

ISBN Author Title Price Rs. Qty9789381075586 Anil Kumar et al. Fundamentals of Mechanical Engineering PB 250.009789383635061 Anil Kumar et al. Advanced Internal Combustion Engines PB 350.009789385433672 Anjaneyulu Y. Introduction to Nano-Science and Technologies PB 695.009789381075890 Anjaneyulu Y. Energy Resources, Utilization and Technologies PB * 750.009788126541133 Asada Robot Analysis and Control PB * 795.00

Balan K. P. Meteorological Failure Analysis: Techniques TBA9788178002774 Bansal Kompal Fundamentals of Intellectual Property for Engineers PB * 325.009780415996358 Beckford Quality, A Critical Introduction, 3rd Ed. PB * 695.009789381075012 Bhatnagar S. Manufacturing Processes PB 125.009789382291305 Bramwell Bramwell’s Helicopter Dynamics, 2nd Ed. PB 1295.009789351072959 Bunshah Rointan F. Handbook of Hard Coatings: Deposition Technolgies, Properties and Applications HB 4995.009788132233442 Chawla Composite Materials Science and Engineering, 3rd Ed. PB *1495.009789812778987 Chua C. K. Rapid Prototyping: Principles and Applications, 3rd Ed. PB 1495.009780849312809 Crowe Multiphase Flow Handbook HB 5000.009789381075005 Deolalkar S. P Nomograms for Design and Operation of Cement Plants HB 2500.009788178002644 Deolalkar S. P Handbook for Designing Cement Plants HB 10000.009788178003023 Deolalkar S. P Designing Green Cement Plants HB 3500.009781587161421 Dhillon B.S Engineering Maintenance: A Modern Approach PB * 795.009780849315862 Dorf Richard C. The Engineering Handbook, 2nd Ed., HB 6000.009780849315879 Dorf Richard C. CRC Handbook of Engineering Tables HB 3000.009788126525805 Gabriel M. Rebeiz RF MEMS: Theory, Design and Technology PB * 1295.009781138570948 Gibson Principles of Composite Material Mechanics, 4th Ed. PB 1295.009780486324319 Hartog J P Den Advanced Strength o f Materials PB 895.009789383635214 Hindoliya A Textbook of Engineering Graphics PB 625.009781138049277 Hofy Fundamentals of Machining Process:

Conventional and Non Conventional Processes, 2nd Ed. PB 895.009789351072881 Holmberg Kenneth Coatings Tribology: Properties Mechanisma,

Techniques and Applications in Surface Engineering HB 4495.00Israni & P. K. Shah Basic Mechanical Engineering, 2nd Ed. PB TBA

9780849325090 Johnson Richard W. The Handbook of Fluid Dynamics HB 7000.009781138198012 Jones Mechanics of Composite Materials, 2nd ed. PB * 1095.009788181282828 Kasana & Kumar Introductory Operations Research Theory & Appllications PB * 795.009789352300921 Kiran D. R. Total Quality Management PB 650.009789352301621 Kiran D. R. Maintenance Engineering and Management: Precepts and Practices, 2nd Ed. PB 350.009780486324326 Kirk Donald E. Optimal Control Theory An Introduction PB 995.009788178002699 Kumar P. Hydraulic Machines: Fundamentals of Hydraulic Power Systems PB 350.009789381075081 Kutumbarao V.V. Frontiers of Metallurgy and Materials Technology HB 1995.009788178002507 Lakshmi Narasaiah Aircraft Structures PB 350.009788178001395 Lakshmi Narasaiah Finite Element Analysis PB 275.009780849312625 Lyshevski Mems and Nems: Systems, Devices, and Structures PB * 995.009781138049277 Meadows Geometric Dimensioning and Tolerancing PB * 1695.009788126552627 Messler Robert W. Principles of Welding: Processes, Physics, Chemistry, and Metallurgy HB 4495.009781259064937 Mortenson Geometric Modeling, 3rd Ed. PB 1095.009788131207383 Murphy Energy Management PB * 850.009789383635757 Murthy Ramana et al. Design Data Book PB 125.009789381075807 Pandarinath Aviation Meteorology PB 895.009788178001999 Prashad H. Integral Approaches to Tribo-testing in Mechanical Engineering HB 3995.009789352300891 Raju N.V.S Instrumentaion: Operation, Measurement, Scope and Application of Instruments PB 750.009789352301904 Raju N.V.S Operations Research: Theory and Pratice PB 495.009788178001241 Rao Koteswara Energy Resources Conventional & Non-Conventional, 2nd Ed. HB * 550.009789381075562 Rao Nageswara Research Methodology and Quantitative Methods PB 295.008178001268 Reddy L. Krishna Production Technology PB * 250.009789381075913 Reddy P. Jayarama Science and Technology of Photovoltaics, 2nd Ed. PB 695.009788178001890 Reddy Ravinder Proceedings of International Conference on Computational

Methods in Engineering & Science IC-CMES’09 HB 2495.009788178002088 Reddy Venkat Textbook of Engineering Drawing, 4th Ed. PB * 395.009788178003078 Reddy Venkat Workshop Practice Manual, 6th Ed. PB * 195.009781574442663 Ross Joel E. Total Quality Management: Text, Cases, and Readings, 3rd Ed. PB * 1495.009788178001838 Sarma A.M. Safety and Health in Industry: A Handbook HB 1495.009788126528806 Segerlind Larry J. Applied Finite Element Analysis, 2nd Ed. PB 1395.009788178002194 Singer Singer’s Engineering Mechanics: Statics and Dynamics, 3rd Ed. (SI Units) PB * 495.009788178001548 Suryanarayana Fuels, Furnaces, Refractories and Pyrometry, 2nd Ed. PB 225.009788178001340 Suryanarayana Testing of Metallic Materials, 2nd Ed. PB * 325.009789381075876 Suryanarayana Material Science and Metallurgy PB 250.009788126525775 Sutton Rocket Propulsion Elements, 7th Ed. PB *1795.009780824777180 Talavage Joseph Flexible Manufacturing Systems in Practice: Applications PB * 995.00

ORDER / RECOMMENDATION FORM



Vis

it: w

ww

.bsp

book

s.ne

t / w

ww

.bsp

ublic

atio

ns.n

et fo

r lat

est u

pdat

es

ISBN Author Title Price Rs. Qty

Order / Recommeded by __________________________ Department ____________________________

College Stamp Date: ____________

Turner Energy Management Handbook, 8th Ed. PB 3495.009780415584388 Twidell & Weir Renewable Energy Resources, 3rd Ed. PB * 1695.009788178002811 Viswanadh G.K. Recent Advances in Design, Development & Operation of Micro Air Vehicles HB 1795.009788181286024 Waldron Mechanical Design: Theory and Methodology PB * 995.009781439845592 Wong Thermodynamics for Engineers 2nd Ed. PB * 995.009788178001470 Zoeb Hussain Basic Fluid Mechanics and Hydraulic Machines PB 200.009780849330773 Zurawski Richard The Industrial Communication Technology Handbook HB 5000.009780849319853 Zurawski Richard The Industrial Information Technology Handbook HB 6000.00

NORTH ZONENORTH ZONENORTH ZONENORTH ZONENORTH ZONE

AVAVAVAVAVADESH KUMAR ADESH KUMAR ADESH KUMAR ADESH KUMAR ADESH KUMAR TIWTIWTIWTIWTIWARIARIARIARIARITerritory Sales Manager

(M) 09415810938

[email protected] / [email protected]@bspbooks.net

MUKESH MISHRAMUKESH MISHRAMUKESH MISHRAMUKESH MISHRAMUKESH MISHRASales Executive (M) [email protected]

WEST ZONEWEST ZONEWEST ZONEWEST ZONEWEST ZONE

VISHAL SUTVISHAL SUTVISHAL SUTVISHAL SUTVISHAL SUTARARARARARSales Executive (M) 09890763276

[email protected]@yahoo.com

CENTRAL ZONECENTRAL ZONECENTRAL ZONECENTRAL ZONECENTRAL ZONETEERATEERATEERATEERATEERATH PATH PATH PATH PATH PATELTELTELTELTEL

Territory Sales Manager (M) [email protected]; [email protected]

EAST ZONEEAST ZONEEAST ZONEEAST ZONEEAST ZONE

KRISHNKRISHNKRISHNKRISHNKRISHNA PAA PAA PAA PAA PATRTRTRTRTROOOOOSales Executive (M) [email protected] / [email protected]

SOUTH ZONESOUTH ZONESOUTH ZONESOUTH ZONESOUTH ZONE

M. HARIPRASADM. HARIPRASADM. HARIPRASADM. HARIPRASADM. HARIPRASADSales Executive (M) [email protected]

S. SUKUMARS. SUKUMARS. SUKUMARS. SUKUMARS. SUKUMAR

Sales Executive (M) [email protected] / [email protected];

Contact our Nearest Representative for Assistance

ME

CH

|19|

JU

LY-1

9 | 1

500

BSP Books Pvt. Ltd.4-4-309 / 316, Giriraj Lane, Sultan Bazar,Koti, Hyderabad - 500 095.Ph: 040-23445688, 23445605, Fax : 91+40-23445611e-mail: [email protected]; [email protected]

Imprints: BS Publications PharmaMed Press

Please send your orders / enquiriesHead Office

VASUDEV RAOVASUDEV RAOVASUDEV RAOVASUDEV RAOVASUDEV RAOMarketing Manager

09701334178; [email protected]

MADHURESH N. SHAHMADHURESH N. SHAHMADHURESH N. SHAHMADHURESH N. SHAHMADHURESH N. SHAHChannel Manager-Retail and E-commerce


NIKUNJESH A. SHAHNIKUNJESH A. SHAHNIKUNJESH A. SHAHNIKUNJESH A. SHAHNIKUNJESH A. SHAHChannel Manager-Marketing and Sales


SANTOSH A.SANTOSH A.SANTOSH A.SANTOSH A.SANTOSH A.Product Specialist (Pharmacy)


Purchase books onlineon our official website

www.booksonweb.net

ORDER / RECOMMENDATION FORM

04 mech - bs publications

Documents